Formula 1 1600 hp...2400 cc 1.5x hp, 3x speed
•
0 likes•144 views
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. The Formula 1 car has 1200 hp, reaches 900 kph, and can complete laps 30 seconds faster than the regular car due to its higher power, lower weight, and improved fuel efficiency. Andy Technology proposes a new design that aims to achieve 1.5 times the power and 3 times the speed of current Formula 1 cars through advances like low rolling friction at the front wheels.
Report
Share
Report
Share
Download to read offline
Recommended
Formula 1 800 hp...2400 cc same hp, 2 x speed
This document compares the specifications of a Formula 1 car and an experimental car designed by Andy Technology. The experimental car has the same power and volume as a Formula 1 car but can achieve double the top speed and is more fuel efficient, producing fewer emissions. It is estimated to win a race by 12-13 laps using a design with low rolling friction at the front wheels.
Formula 1 800 hp..800 cc same hp, 2 x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Power Plant
The document describes the design of a new thermal power plant called ANDY that uses a novel rotary engine and requires less coal than a conventional power plant. Key points:
- ANDY requires 100 kg of coal/MWh compared to 300 kg/MWh for a conventional power plant, reducing coal usage and CO2 emissions by two-thirds.
- The lower fuel usage saves $200/ton of coal and $288,000 per year for a 1000 MW plant.
- ANDY's novel rotary engine allows it to generate power directly without a boiler or turbine, further improving efficiency.
- The document provides specifications for ANDY engines between 1-1000 MW in size and estimates lower
Automotive royalty on r o i
Andy Technology produces more efficient engine and bearing components called Andy Engine and Andy Bearing. Vehicles equipped with Andy components can achieve double the speed for the same ton-horsepower and use 33% less fuel and produce 33% fewer CO2 emissions than comparable vehicles, while generating royalty income for Andy Technology. A table shows the benefits of Andy components for bikes, cars, and trucks in terms of increased speed, reduced fuel and operating costs, and generated royalty compared to conventional vehicles.
Andy motors inc
The document describes new engine, bearing, and jet designs from Andy Motors that significantly reduce fuel consumption and increase efficiency for vehicles like bikes, cars, trucks and buses. The key designs include an Andy Engine that requires only 1/3 the normal fuel to produce the same horsepower, and Andy Bearings and Jets that halve rolling resistance and allow vehicles to travel at double the speed for the same ton-horsepower ratio while using half as much fuel. Implementation of these designs could save 66% of fuel costs for operators and reduce CO2 emissions by 33%.
Andy technology automotive cost paid back in days
1) Andy Bearing and Jet technology can reduce fuel consumption and pay back the additional cost in a short period of time for vehicles like bikes, cars, and trucks compared to same vehicles without the technology.
2) For bikes, the extra cost is paid back in 15 days, for cars the extra cost is paid back in 38 days, and for trucks the extra cost is paid back in 63 days through reduced fuel costs from improvements in rolling friction and speed.
3) The document provides examples of fuel cost savings calculations based on usage hours and distance traveled to show the payback period for the added costs of Andy Bearing and Jet technologies for different vehicle types.
Automotive bike 360 kmpl
The document describes an innovative automotive bike that achieves 360 kilometers per liter of fuel (kmpl) through the use of Andy Engine and Andy Bearing technologies. The bike can travel 120 kilometers per hour with an engine size of 30cc that uses only 1/3 liter of fuel per hour, resulting in a fuel efficiency of 360 kmpl. The bike's cost is estimated to be $1000 and it emits 775 grams of carbon dioxide per hour. The inventor is named M Andy Appan, who is a 45-year-old mechanical engineering expert.
Recommended
Formula 1 800 hp...2400 cc same hp, 2 x speed
This document compares the specifications of a Formula 1 car and an experimental car designed by Andy Technology. The experimental car has the same power and volume as a Formula 1 car but can achieve double the top speed and is more fuel efficient, producing fewer emissions. It is estimated to win a race by 12-13 laps using a design with low rolling friction at the front wheels.
Formula 1 800 hp..800 cc same hp, 2 x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Power Plant
The document describes the design of a new thermal power plant called ANDY that uses a novel rotary engine and requires less coal than a conventional power plant. Key points:
- ANDY requires 100 kg of coal/MWh compared to 300 kg/MWh for a conventional power plant, reducing coal usage and CO2 emissions by two-thirds.
- The lower fuel usage saves $200/ton of coal and $288,000 per year for a 1000 MW plant.
- ANDY's novel rotary engine allows it to generate power directly without a boiler or turbine, further improving efficiency.
- The document provides specifications for ANDY engines between 1-1000 MW in size and estimates lower
Automotive royalty on r o i
Andy Technology produces more efficient engine and bearing components called Andy Engine and Andy Bearing. Vehicles equipped with Andy components can achieve double the speed for the same ton-horsepower and use 33% less fuel and produce 33% fewer CO2 emissions than comparable vehicles, while generating royalty income for Andy Technology. A table shows the benefits of Andy components for bikes, cars, and trucks in terms of increased speed, reduced fuel and operating costs, and generated royalty compared to conventional vehicles.
Andy motors inc
The document describes new engine, bearing, and jet designs from Andy Motors that significantly reduce fuel consumption and increase efficiency for vehicles like bikes, cars, trucks and buses. The key designs include an Andy Engine that requires only 1/3 the normal fuel to produce the same horsepower, and Andy Bearings and Jets that halve rolling resistance and allow vehicles to travel at double the speed for the same ton-horsepower ratio while using half as much fuel. Implementation of these designs could save 66% of fuel costs for operators and reduce CO2 emissions by 33%.
Andy technology automotive cost paid back in days
1) Andy Bearing and Jet technology can reduce fuel consumption and pay back the additional cost in a short period of time for vehicles like bikes, cars, and trucks compared to same vehicles without the technology.
2) For bikes, the extra cost is paid back in 15 days, for cars the extra cost is paid back in 38 days, and for trucks the extra cost is paid back in 63 days through reduced fuel costs from improvements in rolling friction and speed.
3) The document provides examples of fuel cost savings calculations based on usage hours and distance traveled to show the payback period for the added costs of Andy Bearing and Jet technologies for different vehicle types.
Automotive bike 360 kmpl
The document describes an innovative automotive bike that achieves 360 kilometers per liter of fuel (kmpl) through the use of Andy Engine and Andy Bearing technologies. The bike can travel 120 kilometers per hour with an engine size of 30cc that uses only 1/3 liter of fuel per hour, resulting in a fuel efficiency of 360 kmpl. The bike's cost is estimated to be $1000 and it emits 775 grams of carbon dioxide per hour. The inventor is named M Andy Appan, who is a 45-year-old mechanical engineering expert.
PR
This document provides an overview of various cutting tools including:
1) Coated grades for turning cast iron and steel, as well as cermet and CBN grades.
2) Milling tools such as end mills, face milling cutters, and shoulder milling cutters for materials like aluminum alloys, titanium alloys, and cast iron.
3) Drilling tools including indexable and solid carbide drills for small diameters and deep hole drilling in materials like steel, aluminum, and stainless steel.
Machining
This document provides an overview of machining operations, focusing on turning and milling. It defines turning as producing round parts using a single-point cutting tool on a lathe, where the workpiece rotates. Milling involves using a multi-tooth cutting tool called a milling cutter to produce flat and complex shapes. Key aspects of each process like cutting speed, feed, and common tooling/machines are described. The document also discusses computer-controlled lathes and different types of lathes and milling machines used for various operations.
Stage 2 Physics Formula Physics 2014
The document provides formulas and explanations related to stage 2 physics. It discusses several key formulas:
1) The six equations of motion that can be used to solve projectile motion problems.
2) F=ma, the formula expressing Newton's Second Law, where force is equal to mass times acceleration.
3) F=mg, the formula for calculating gravitational force (weight) of an object in a gravitational field.
4) v=2πr/T, the formula for calculating speed of an object in uniform circular motion using radius and period.
non traditional machining
This document summarizes key concepts in traditional machining processes. It discusses chip formation, types of chips, tool geometry including rake angle, tool wear, cutting parameters such as depth of cut and step over distance, recommended feeds and speeds, factors that affect machinability, and power and force calculations. Examples are provided to demonstrate how to estimate cutting speeds, feeds, and power requirements for different machining operations and materials.
How To Use Harvey Tool's Speeds & Feeds
This document provides recommended speeds and feeds for machining various materials with carbide drill/mill tools. It includes tables of suggested speeds in surface feet per minute (SFM) and chip loads in inches per tooth (IPT) for milling, chamfering, and drilling applications. The speeds and feeds are designed to maximize tool life, minimize damage, and decrease production costs by lowering breakage and optimizing the tool's performance. Users can find all the parameters needed to machine with purchased tools from these guidelines.
High speed machining (HSM)
The document provides an overview of high speed machining (HSM), including its history, definitions, process parameters, machine details, advantages/disadvantages, applications, and conclusions. It discusses how HSM uses high spindle speeds and feed rates with specific tools and tool motions. Key benefits of HSM include improved accuracy, efficiency, reduced machining times, and decreased costs compared to conventional machining. The document also compares HSM to conventional machining and EDM.
TECHNICAL DATA
The document discusses the effects of various cutting conditions on tool life and performance during turning operations. It addresses the impact of cutting speed, feed rate, depth of cut, and use of coolant. Increasing cutting speed decreases tool life, while higher feed rates improve efficiency but also increase temperatures and wear. Proper selection of cutting conditions depends on workpiece material and hardness.
Week 1 mill 1
The document discusses milling processes and provides details about various milling techniques. It defines milling, describes up and down milling methods, and covers topics such as milling machines, cutters, operations, and factors that influence tool life. Examples of peripheral and face milling are illustrated.
Physics formula list 2
This document contains physics formulas and concepts related to waves, electricity, electromagnetism, electronics, and radioactivity. It includes equations for oscillation, wavelength, interference, charge, current, potential difference, resistance, electromotive force, transformers, alpha decay, beta decay, gamma emission, and nuclear energy. The document provides definitions and explanations for key terms as well as examples of applying the formulas.
Cnc Milling
This document provides information about CNC milling. It discusses learning outcomes, introduces milling processes and classifications. It describes the theory of CNC milling machines, including their characteristics, geometry, coordinate systems, zero and reference points, and programming structure. It also covers cutting values, clamping devices, and lists G-codes and M-functions.
O level physics formula sheet
This document contains a summary of key physics formulas and concepts for 'O' Level Physics. It includes:
1) Definitions of base SI units for common physical quantities like mass, length, time, current, temperature, and amount of substance.
2) Formulas for measurements, kinematics, dynamics, work, energy, power, gas laws, heat, electromagnetism, optics, and electricity.
3) Descriptions of important physics principles like Newton's laws of motion, conservation of energy, Ohm's law, Kirchhoff's laws, and more.
Cutting Parameters Optimization in Milling Of P – 20 Tool Steel And EN31B
The objective of the paper is to obtain an optimal setting of CNC machining process parameters,
cutting speed, feed rate resulting in optimal values of the feed and radial forces while machining P – 20 tool
steel and EN31B with TiN coated tungsten carbide inserts. The effects of the selected process parameters on the
chosen characteristics and the subsequent optimal settings of the parameters have been accomplished using
Taguchi’s parameter design approach.The process parameters considered are – Cutting speed 3000rpm,
2500rpm and 2000rpm. Feed rate 200mm/min, 300mm/min and 400mm/min and depth of cut is 0.2mm.The
effect of these parameters on the feed force, radial force are considered for analysis.The analysis of the results
shows that the optimal settings for low values of feed and radial forces are high cutting speed, low feed rate and
depth of cut.The thrust force and feed force are also taken experimentally using dynamometer for above Cutting
speeds, feed rate and depth of cut. The optimal values for speed, feed rate and depth of cut are taken using
Taguchi technique.Taguchi methods are statistical methods developed by Genichi Taguchi to improve the
quality of manufactured goods, and more recently also applied to, engineering, biotechnology, marketing and
advertising.Process used in this project is milling process. Machine selected is Vertical milling center. Machine
model selected is BFW Agni 45. Modeling is done in Pro/Engineer and analysis is done in ANSYS.
Physics formula list
The document provides an overview of key physics equations and concepts for Form 4 students, including equations for relative deviation, prefixes, units for area and volume, equations for average speed, velocity, acceleration, momentum, Newton's laws of motion, and impulse. Key terms are defined for important concepts like displacement, time, mass, force, and velocity. Formulas are presented for calculations involving these fundamental physics quantities and relationships.
Single point cutting tool
This document provides an overview of metal cutting processes on a center lathe. It discusses [1] the basic components and operation of a center lathe, [2] the types of single-point cutting tools used, [3] the theory behind metal cutting, and [4] important factors that influence tool life and cutting performance such as tool angles, cutting speed, feed, and use of cutting fluids. Safety procedures are also emphasized.
Time, distance formula
This document discusses speed, time, and distance formulas. It explains that these formulas relate time, distance, and speed, and have practical applications for calculating travel times, distances, and speeds. The key formulas presented are:
Distance = Rate x Time
Rate = Distance / Time
Time = Distance / Rate
Steps for solving problems using these formulas are outlined, including translating the question into mathematical terms, putting values into consistent units, writing the appropriate equation, and solving it. Several example problems are worked through to demonstrate applying the formulas to calculate distances, rates, and times for scenarios involving traveling cars, trains, runners, and planes.
Work, energy and power ppt
The document outlines key concepts related to work, energy, and power including defining these terms, calculating kinetic and potential energy using formulas, stating the principle of conservation of energy as it relates to the conversion of energy forms, applying these concepts to solve related problems, and calculating mechanical system efficiency. The goal is to understand these fundamental physics concepts and be able to measure, calculate and apply work, energy and power.
Speed, Velocity And Acceleration
The document defines and explains key kinematics concepts including speed, velocity, acceleration, uniform acceleration, and linear motion. Speed is distance over time while velocity includes direction and is a vector. Acceleration is the rate of change of velocity, calculated as the change in velocity over time. Acceleration is uniform if the rate of change is constant, while non-uniform acceleration means the rate varies over time. Velocity decreases in deceleration.
Theory of-metal-cutting
This document contains lecture notes on manufacturing processes and metal cutting theory. It begins with definitions of manufacturing and an overview of various manufacturing processes. It then describes machine tools and their functions in metal cutting. Key sections cover classifications of manufacturing processes, cutting parameters like speed, feed and depth of cut, and characteristics and types of cutting tools materials. In summary, the document provides a comprehensive introduction to manufacturing processes, metal cutting theory, and machine tools.
Pocket Notes Physics
This document defines various physics terms across multiple chapters. It provides definitions for over 100 terms related to physical quantities, force and motion, heat, light, waves, electricity, electromagnetism, and electronics. The terms are organized into tables with their number, term, and definition.
Milling cutter
Milling cutters are cutting tools used to remove material from workpieces in milling machines. They have cutting edges and flutes to remove chips of material. Common milling cutter types include end mills, face mills, and inserted tooth cutters. Milling cutters come in various geometries and are made of materials like high-speed steel or carbide depending on the application. Cutting parameters like spindle speed, feed rate, depth of cut, and surface cutting speed determine how efficiently a milling cutter removes material from a workpiece.
Factory inv ret roi inv 3.4 bn$
LOW CARBON TECHNOLOGY
DOUBLE SPEED, 1/3 FUEL for SAME TON-HP TRANSPORT
6 time kmpl, 1/6 CO2e g/km
Andy transport no ghge
The document proposes a new transportation system called Andy Transport that uses water jet propulsion instead of engines or fuel. It would use the hydro-static pressure from a water column at 6000 meters depth to power vehicles like cars, trucks, trains, ships, jets, missiles, and rockets. It claims this system would have no emissions, low costs, high returns on investment, and could travel on land and water. It provides examples of potential vehicle specifications and performance metrics like tonnage, speed, power output, operating costs, fares, and return on investment.
More Related Content
Viewers also liked
PR
This document provides an overview of various cutting tools including:
1) Coated grades for turning cast iron and steel, as well as cermet and CBN grades.
2) Milling tools such as end mills, face milling cutters, and shoulder milling cutters for materials like aluminum alloys, titanium alloys, and cast iron.
3) Drilling tools including indexable and solid carbide drills for small diameters and deep hole drilling in materials like steel, aluminum, and stainless steel.
Machining
This document provides an overview of machining operations, focusing on turning and milling. It defines turning as producing round parts using a single-point cutting tool on a lathe, where the workpiece rotates. Milling involves using a multi-tooth cutting tool called a milling cutter to produce flat and complex shapes. Key aspects of each process like cutting speed, feed, and common tooling/machines are described. The document also discusses computer-controlled lathes and different types of lathes and milling machines used for various operations.
Stage 2 Physics Formula Physics 2014
The document provides formulas and explanations related to stage 2 physics. It discusses several key formulas:
1) The six equations of motion that can be used to solve projectile motion problems.
2) F=ma, the formula expressing Newton's Second Law, where force is equal to mass times acceleration.
3) F=mg, the formula for calculating gravitational force (weight) of an object in a gravitational field.
4) v=2πr/T, the formula for calculating speed of an object in uniform circular motion using radius and period.
non traditional machining
This document summarizes key concepts in traditional machining processes. It discusses chip formation, types of chips, tool geometry including rake angle, tool wear, cutting parameters such as depth of cut and step over distance, recommended feeds and speeds, factors that affect machinability, and power and force calculations. Examples are provided to demonstrate how to estimate cutting speeds, feeds, and power requirements for different machining operations and materials.
How To Use Harvey Tool's Speeds & Feeds
This document provides recommended speeds and feeds for machining various materials with carbide drill/mill tools. It includes tables of suggested speeds in surface feet per minute (SFM) and chip loads in inches per tooth (IPT) for milling, chamfering, and drilling applications. The speeds and feeds are designed to maximize tool life, minimize damage, and decrease production costs by lowering breakage and optimizing the tool's performance. Users can find all the parameters needed to machine with purchased tools from these guidelines.
High speed machining (HSM)
The document provides an overview of high speed machining (HSM), including its history, definitions, process parameters, machine details, advantages/disadvantages, applications, and conclusions. It discusses how HSM uses high spindle speeds and feed rates with specific tools and tool motions. Key benefits of HSM include improved accuracy, efficiency, reduced machining times, and decreased costs compared to conventional machining. The document also compares HSM to conventional machining and EDM.
TECHNICAL DATA
The document discusses the effects of various cutting conditions on tool life and performance during turning operations. It addresses the impact of cutting speed, feed rate, depth of cut, and use of coolant. Increasing cutting speed decreases tool life, while higher feed rates improve efficiency but also increase temperatures and wear. Proper selection of cutting conditions depends on workpiece material and hardness.
Week 1 mill 1
The document discusses milling processes and provides details about various milling techniques. It defines milling, describes up and down milling methods, and covers topics such as milling machines, cutters, operations, and factors that influence tool life. Examples of peripheral and face milling are illustrated.
Physics formula list 2
This document contains physics formulas and concepts related to waves, electricity, electromagnetism, electronics, and radioactivity. It includes equations for oscillation, wavelength, interference, charge, current, potential difference, resistance, electromotive force, transformers, alpha decay, beta decay, gamma emission, and nuclear energy. The document provides definitions and explanations for key terms as well as examples of applying the formulas.
Cnc Milling
This document provides information about CNC milling. It discusses learning outcomes, introduces milling processes and classifications. It describes the theory of CNC milling machines, including their characteristics, geometry, coordinate systems, zero and reference points, and programming structure. It also covers cutting values, clamping devices, and lists G-codes and M-functions.
O level physics formula sheet
This document contains a summary of key physics formulas and concepts for 'O' Level Physics. It includes:
1) Definitions of base SI units for common physical quantities like mass, length, time, current, temperature, and amount of substance.
2) Formulas for measurements, kinematics, dynamics, work, energy, power, gas laws, heat, electromagnetism, optics, and electricity.
3) Descriptions of important physics principles like Newton's laws of motion, conservation of energy, Ohm's law, Kirchhoff's laws, and more.
Cutting Parameters Optimization in Milling Of P – 20 Tool Steel And EN31B
The objective of the paper is to obtain an optimal setting of CNC machining process parameters,
cutting speed, feed rate resulting in optimal values of the feed and radial forces while machining P – 20 tool
steel and EN31B with TiN coated tungsten carbide inserts. The effects of the selected process parameters on the
chosen characteristics and the subsequent optimal settings of the parameters have been accomplished using
Taguchi’s parameter design approach.The process parameters considered are – Cutting speed 3000rpm,
2500rpm and 2000rpm. Feed rate 200mm/min, 300mm/min and 400mm/min and depth of cut is 0.2mm.The
effect of these parameters on the feed force, radial force are considered for analysis.The analysis of the results
shows that the optimal settings for low values of feed and radial forces are high cutting speed, low feed rate and
depth of cut.The thrust force and feed force are also taken experimentally using dynamometer for above Cutting
speeds, feed rate and depth of cut. The optimal values for speed, feed rate and depth of cut are taken using
Taguchi technique.Taguchi methods are statistical methods developed by Genichi Taguchi to improve the
quality of manufactured goods, and more recently also applied to, engineering, biotechnology, marketing and
advertising.Process used in this project is milling process. Machine selected is Vertical milling center. Machine
model selected is BFW Agni 45. Modeling is done in Pro/Engineer and analysis is done in ANSYS.
Physics formula list
The document provides an overview of key physics equations and concepts for Form 4 students, including equations for relative deviation, prefixes, units for area and volume, equations for average speed, velocity, acceleration, momentum, Newton's laws of motion, and impulse. Key terms are defined for important concepts like displacement, time, mass, force, and velocity. Formulas are presented for calculations involving these fundamental physics quantities and relationships.
Single point cutting tool
This document provides an overview of metal cutting processes on a center lathe. It discusses [1] the basic components and operation of a center lathe, [2] the types of single-point cutting tools used, [3] the theory behind metal cutting, and [4] important factors that influence tool life and cutting performance such as tool angles, cutting speed, feed, and use of cutting fluids. Safety procedures are also emphasized.
Time, distance formula
This document discusses speed, time, and distance formulas. It explains that these formulas relate time, distance, and speed, and have practical applications for calculating travel times, distances, and speeds. The key formulas presented are:
Distance = Rate x Time
Rate = Distance / Time
Time = Distance / Rate
Steps for solving problems using these formulas are outlined, including translating the question into mathematical terms, putting values into consistent units, writing the appropriate equation, and solving it. Several example problems are worked through to demonstrate applying the formulas to calculate distances, rates, and times for scenarios involving traveling cars, trains, runners, and planes.
Work, energy and power ppt
The document outlines key concepts related to work, energy, and power including defining these terms, calculating kinetic and potential energy using formulas, stating the principle of conservation of energy as it relates to the conversion of energy forms, applying these concepts to solve related problems, and calculating mechanical system efficiency. The goal is to understand these fundamental physics concepts and be able to measure, calculate and apply work, energy and power.
Speed, Velocity And Acceleration
The document defines and explains key kinematics concepts including speed, velocity, acceleration, uniform acceleration, and linear motion. Speed is distance over time while velocity includes direction and is a vector. Acceleration is the rate of change of velocity, calculated as the change in velocity over time. Acceleration is uniform if the rate of change is constant, while non-uniform acceleration means the rate varies over time. Velocity decreases in deceleration.
Theory of-metal-cutting
This document contains lecture notes on manufacturing processes and metal cutting theory. It begins with definitions of manufacturing and an overview of various manufacturing processes. It then describes machine tools and their functions in metal cutting. Key sections cover classifications of manufacturing processes, cutting parameters like speed, feed and depth of cut, and characteristics and types of cutting tools materials. In summary, the document provides a comprehensive introduction to manufacturing processes, metal cutting theory, and machine tools.
Pocket Notes Physics
This document defines various physics terms across multiple chapters. It provides definitions for over 100 terms related to physical quantities, force and motion, heat, light, waves, electricity, electromagnetism, and electronics. The terms are organized into tables with their number, term, and definition.
Milling cutter
Milling cutters are cutting tools used to remove material from workpieces in milling machines. They have cutting edges and flutes to remove chips of material. Common milling cutter types include end mills, face mills, and inserted tooth cutters. Milling cutters come in various geometries and are made of materials like high-speed steel or carbide depending on the application. Cutting parameters like spindle speed, feed rate, depth of cut, and surface cutting speed determine how efficiently a milling cutter removes material from a workpiece.
Viewers also liked (20)
Cutting Parameters Optimization in Milling Of P – 20 Tool Steel And EN31B
Cutting Parameters Optimization in Milling Of P – 20 Tool Steel And EN31B
More from Muthukal Appan
Factory inv ret roi inv 3.4 bn$
LOW CARBON TECHNOLOGY
DOUBLE SPEED, 1/3 FUEL for SAME TON-HP TRANSPORT
6 time kmpl, 1/6 CO2e g/km
Andy transport no ghge
The document proposes a new transportation system called Andy Transport that uses water jet propulsion instead of engines or fuel. It would use the hydro-static pressure from a water column at 6000 meters depth to power vehicles like cars, trucks, trains, ships, jets, missiles, and rockets. It claims this system would have no emissions, low costs, high returns on investment, and could travel on land and water. It provides examples of potential vehicle specifications and performance metrics like tonnage, speed, power output, operating costs, fares, and return on investment.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Coal, crude oil fuel in diesel engine.ppt
The document discusses using various solid and liquid fuels such as coal, crude oil, and furnace oil to power diesel engines in automobiles and other vehicles. It states that these raw fuels can be directly burned in an open rotary furnace at normal temperature and pressure to produce hot gases that are then fed into a diesel engine. It compares the costs of using different fuels like coal, diesel, furnace oil, and crude oil to power a 2-ton car with a 100hp engine. It also provides contact information for Andy Appan, a 50-year expert in India.
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Carbon dioxide levels in the atmosphere have reached 120 parts per million, according to measurements. This concentration of CO2 exceeds pre-industrial levels and is largely due to human activities like burning fossil fuels. If emissions continue unchecked, climate change effects are expected to intensify and become more damaging.
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
No carbon technology for Tranport, Power Plant GHGe 120 ppm
no carbon all transports , power plant
fare 1c/km; ppa : 3c/kwh, 30$/mwh
automotive,rail,ship,jet,missile,rockt
ghge reduction 25 bnt/yr. ghge= 120 ppm
catapult renewable energy 1.23 mn lbs/sft thrust
from 6000 m deth water 6000 t/sqm
inv 120 bn$. pat 240 bn$/yr in 4 yrs
No carbon technology
This document describes a renewable energy technology called a catapult water jet that uses water pressure from deep ocean depths to generate thrust and power without engines or fuel. Some key points:
- It uses water pumped from 6000m depths with 6000 tons/sqm pressure (600kg/sqcm) for thrust and to power vehicles, ships, and power plants.
- It can be used for transportation including cars, trucks, trains, ships, jets, missiles and rockets with 50% lower capex and opex than traditional methods and 50% higher speed for the same horsepower.
- It can also be used for power generation in plants using Pelton water turbines with varying diameters and widths. A
Csp solar furnace, cupola. 750 'c 15 mn 'c
This document contains tables of data with calculations for the CSP solar furnace cupola with varying diameters (D) and material thicknesses (d) measured in mm. It lists the resulting spot temperature (SPOT °C) for different configurations ranging from diameters of 10-30 mm and thicknesses of 0.043-2.0 mm. The document is signed by Muthukal Andy Appan, an expert in Chennai, India with 50 years of experience.
Csp solar 15 mn 'c sun
This document contains data measuring the cooling rate of a material as the diameter of a hole in the material is increased from 0.01 mm to 0.1 mm in increments of 0.01 mm or 0.02 mm. The cooling rate is reported in °C/min for each hole diameter when the material is cooled from 30°C. Smaller hole diameters resulted in higher cooling rates.
Andy transport power plant technology 12 bn$
This document outlines royalty terms and investment details for a new transport and power plant technology called Andy Engine. Key points:
- Royalty terms are proposed at 70:30 or 90:10 split, with repayment of investments at 50% interest over 2, 4, or 6 years.
- The technology is currently at the idea stage and needs a prototype demonstration at 1/100 scale. It involves retrofitting Andy Engines, Bearings, and Jets externally to vehicles and power plants.
- It claims to provide double the speed and 1/3 the fuel consumption compared to traditional engines for the same power. It can use all solid, liquid, and gaseous fuels in their raw condition.
Andy tech auto, rail, ship, jet, missile, fso
The document discusses various modes of transportation including automotive, rail, ship, floating storage and offloading units, jets, missiles, and rockets. It provides specifications on fuel efficiency measured in kilometers per liter or metric tons for different vehicle types like cars, trucks, trains, ships, and jets. It also lists technical details of Andy Technology which can double speeds and reduce fuel consumption by 1/3 for the same ton-horsepower compared to conventional engines, bearings, and jets. The document is authored by Mutukal Andy Appan, an Indian mechanical engineering expert with 50 years of experience.
Business plan 100 mn$
Andy Technology provides innovative designs for low-cost, low-carbon, and high-speed transportation and power solutions. Key concepts include an Andy Engine that can run on all fuel sources using 1/3 the fuel and space as conventional engines, Andy Bearings that reduce friction to double or triple speeds of vehicles, and Andy Jets that further boost speeds. When applied to trucks, ferries, and ships, these technologies yield 864-3200% returns on investment with double speeds and 1/3 the fuel use. The designs also enable mega-structures like 1000m tall towers and 1000m x 1000m hanging structures to be built without scaffolding. Overall, Andy Technology aims to solve problems across engines, transportation, and construction
Automotive startup 2mn$
Andy Technology proposes a low carbon design that doubles vehicle speed and fuel efficiency while reducing CO2 emissions by 50% using low rolling friction idle wheels, with costs of $1,000 for bikes, $12,000 for cars, and $50,000 for trucks. A bike could travel 200kmph getting 120kmpl and emitting 19.4g/km of CO2, a car could travel 200kmph getting 20kmpl and emitting 116g/km of CO2, and a truck could travel 200kmph getting 10kmpl and emitting 233g/km of CO2. The venture requires $200,000 in demo funding for 6 months and $2 million in startup investment repayable after 1 year.
Business inv, ret, re paid1
The document outlines various investment amounts, returns, and repayment timelines. It then discusses technologies that can double speed while using one-third the fuel for the same horsepower output. These technologies allow vehicles to achieve higher speeds including 200 kph for automotive, 300-600 kph for rail, 330-660 knots for ships, and up to supersonic and hypersonic speeds for other vehicles. It is signed by an Indian expert in automotive, bullet trains, ships, and sea missiles.
Automotive royalty
This document outlines royalty rates in rupees for various vehicles with different engine capacities and weights, including mopeds, bikes, cars, trucks, and trailers. Royalties are paid monthly at the beginning of each month based on 3 months of advanced production value to Muthukal Andy Appan, a 50-year-old mechanical engineering expert in Chennai, India.
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Bike 100 cc 33 % fuel
The document compares the specifications of three bikes: Data Bike, Andy, and Andy. Andy has a smaller engine size of 33cc compared to 100cc for the other two bikes, but has higher fuel efficiency of 360 kmpl versus 60-120 kmpl for the others. It can achieve the same ton-kph and ton-kpl as the other bikes using only 1/3 the fuel. The inventor, Muthukal Andy Appan, has received a 502,000$ venture fund for his Andy Technology that aims to design automotives with low carbon emissions.
Truck 15 t,
The document compares the specifications of two trucks - a standard Data Truck and an improved Andy Truck. The Andy Truck has equivalent power and volume but significantly higher speed, fuel efficiency, payload capacity, and acceleration due to improvements in technology and design that reduce CO2 emissions and braking distance. The document was authored by an automotive expert evaluating low carbon truck design alternatives.
Formula 1 2400 hp...2400 cc win by 12 25 laps
Andy Engine technology provides 3 times the power and 4 times the speed of conventional Formula 1 engines while using the same amount of fuel, allowing cars equipped with the Andy Engine to win races by 12-25 more laps and shave 20-40 seconds off lap times. The Andy Engine achieves greater efficiency through innovations that result in higher horsepower per fuel usage, tons per kilometer, and tons per kiloliter of fuel compared to conventional engines.
More from Muthukal Appan (20)
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Stop solar. wind, fuel energy sources. gh ge 120 ppm
No carbon technology for Tranport, Power Plant GHGe 120 ppm
No carbon technology for Tranport, Power Plant GHGe 120 ppm
Recently uploaded
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recently uploaded (20)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Formula 1 1600 hp...2400 cc 1.5x hp, 3x speed
- 1. Data Formula1 Andy F1 Saved weight 600kg 600kg - power 800 hp 1200hp 400 Volume 2400cc 1200cc 1200 Fuel/h 24 L 12L 12 L speed 300kph 900kph 600kph Lap.time 90secs 60secs 30s/lap kmpl 12.5 75 62.5 Cost 300,000$ 500,000$ -200k$ Co2e 186g/km 31g/km 155g/km hp/fuel.h 33.3 100 66.6 ton-kph 180 540 360 ton-kpl 7.5 45 37.5 Gallop 0-100kph 5s 3s 2s Venture Fund : 2 mn$, 2 yrs 900kph Muthukal Andy Appan, M.E, 50 yrs. Expert, Chennai. India. ANDY TECHNOLOGY. 1.5x Power, 3x Speed. AUTOMOTIVE FORMULA 1 DESIGN Win by 25 Laps. 30s*60L/90s= 20 Laps by Low Rolling Friction at Front Wheels.