Automotive startup 2mn$
•
0 likes•127 views
Andy Technology proposes a low carbon design that doubles vehicle speed and fuel efficiency while reducing CO2 emissions by 50% using low rolling friction idle wheels, with costs of $1,000 for bikes, $12,000 for cars, and $50,000 for trucks. A bike could travel 200kmph getting 120kmpl and emitting 19.4g/km of CO2, a car could travel 200kmph getting 20kmpl and emitting 116g/km of CO2, and a truck could travel 200kmph getting 10kmpl and emitting 233g/km of CO2. The venture requires $200,000 in demo funding for 6 months and $2 million in startup investment repayable after 1 year.
Report
Share
Report
Share
Download to read offline
Recommended
Concept demo 150,000 $
This document proposes a low carbon energy bus design concept with a 150,000 USD demonstration fund. Key points:
1) The low carbon bus design uses half the engine volume, fuel, and CO2 emissions compared to a normal bus while maintaining the same power, speed, seating and vehicle size.
2) A sample 40-seat bus running 20 hours per day, 360 days per year would save 72,000 liters of diesel fuel annually using the low carbon design.
3) The business plan estimates an annual net profit of 91,200 USD for the low carbon bus, resulting in a high return on investment of 82.91% compared to the normal bus.
10 bus businss transport 1.25 mn$
This document proposes a business plan to invest $1,250,000 to purchase and operate a fleet of 10 low-carbon buses that would reduce fuel consumption and emissions. Key aspects include:
1) The low-carbon bus design uses half the engine volume of a normal bus through changes to the connecting rod and cranking method, cutting fuel use and CO2 emissions in half for the same performance.
2) Operating 10 buses commercially, the low-carbon design would save $91,200 per year in fuel costs while generating $91,200 more annual revenue, for an estimated annual profit of $912,000 and an ROI of 82.91%.
3) The investment would pay for land,
Energy Design
This document discusses a hydrogen fuel technology developed by Energy Design LLC that can be retrofitted to gasoline and diesel engines. It works by using a process that extracts hydrogen from water, which is then added to the air intake of vehicles. This leads to more efficient combustion, reduced emissions, and increased fuel economy and horsepower. Testing has shown reductions in NOx, CO and hydrocarbon emissions as well as savings of up to 16 gallons of gasoline with 1 cup of water. Adopting this technology could help address rising fuel costs and energy independence.
Zero carbon challenge
This document proposes modifying heavy vehicle engines to use compressed natural gas (CNG) instead of diesel to reduce carbon emissions. CNG produces lower carbon emissions than diesel, has a lower cost than diesel, and can provide the same power as a diesel engine. While diesel engines have higher efficiency, CNG hybrid engines have less construction costs and are more eco-friendly. The goal is to help future generations by reducing carbon particles in the atmosphere.
Formula 1 1600 hp...2400 cc 1.5x hp, 3x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. The Formula 1 car has 1200 hp, reaches 900 kph, and can complete laps 30 seconds faster than the regular car due to its higher power, lower weight, and improved fuel efficiency. Andy Technology proposes a new design that aims to achieve 1.5 times the power and 3 times the speed of current Formula 1 cars through advances like low rolling friction at the front wheels.
Business Plan - Setup A Jeans Factory
This document was prepared by 4 students (Atul, Kuldeep, Navneet & Vinay Prajapati). Subject was Entrepreneurship Management & Business Development.
DRAUP : Auto Startup Report
The document provides an overview of the automotive startup landscape and emerging trends in automotive technology. Some key points:
- The automotive industry has evolved from craft production to mass production to lean manufacturing approaches, creating barriers for new startups.
- Automotive 3.0 focuses less on the vehicle and more on services like connectivity, ridesharing, and autonomous vehicles enabled by advances in software and mobile technology.
- The US, India, China, Israel and Germany have large numbers of automotive startups concentrated in areas like transportation technology, electric vehicles, and connected cars. Total funding for automotive startups has grown significantly from $18B in 2010 to over $40B in 2016.
How to Land that First Customer
This document provides tips for landing a first customer. It advises starting by offering potential customers a simple, free piece of help related to the problem being solved rather than immediately introducing the product or service. This builds trust by showing understanding of their complex needs. The next step is to listen to learn about their situation and solutions tried before leveling with them about options considered. The goal is for the customer and business to collaboratively develop a solution, with the business explaining what their product can and cannot do. Introducing the product fully only after understanding the customer's needs and determining if trust has been built.
Recommended
Concept demo 150,000 $
This document proposes a low carbon energy bus design concept with a 150,000 USD demonstration fund. Key points:
1) The low carbon bus design uses half the engine volume, fuel, and CO2 emissions compared to a normal bus while maintaining the same power, speed, seating and vehicle size.
2) A sample 40-seat bus running 20 hours per day, 360 days per year would save 72,000 liters of diesel fuel annually using the low carbon design.
3) The business plan estimates an annual net profit of 91,200 USD for the low carbon bus, resulting in a high return on investment of 82.91% compared to the normal bus.
10 bus businss transport 1.25 mn$
This document proposes a business plan to invest $1,250,000 to purchase and operate a fleet of 10 low-carbon buses that would reduce fuel consumption and emissions. Key aspects include:
1) The low-carbon bus design uses half the engine volume of a normal bus through changes to the connecting rod and cranking method, cutting fuel use and CO2 emissions in half for the same performance.
2) Operating 10 buses commercially, the low-carbon design would save $91,200 per year in fuel costs while generating $91,200 more annual revenue, for an estimated annual profit of $912,000 and an ROI of 82.91%.
3) The investment would pay for land,
Energy Design
This document discusses a hydrogen fuel technology developed by Energy Design LLC that can be retrofitted to gasoline and diesel engines. It works by using a process that extracts hydrogen from water, which is then added to the air intake of vehicles. This leads to more efficient combustion, reduced emissions, and increased fuel economy and horsepower. Testing has shown reductions in NOx, CO and hydrocarbon emissions as well as savings of up to 16 gallons of gasoline with 1 cup of water. Adopting this technology could help address rising fuel costs and energy independence.
Zero carbon challenge
This document proposes modifying heavy vehicle engines to use compressed natural gas (CNG) instead of diesel to reduce carbon emissions. CNG produces lower carbon emissions than diesel, has a lower cost than diesel, and can provide the same power as a diesel engine. While diesel engines have higher efficiency, CNG hybrid engines have less construction costs and are more eco-friendly. The goal is to help future generations by reducing carbon particles in the atmosphere.
Formula 1 1600 hp...2400 cc 1.5x hp, 3x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. The Formula 1 car has 1200 hp, reaches 900 kph, and can complete laps 30 seconds faster than the regular car due to its higher power, lower weight, and improved fuel efficiency. Andy Technology proposes a new design that aims to achieve 1.5 times the power and 3 times the speed of current Formula 1 cars through advances like low rolling friction at the front wheels.
Business Plan - Setup A Jeans Factory
This document was prepared by 4 students (Atul, Kuldeep, Navneet & Vinay Prajapati). Subject was Entrepreneurship Management & Business Development.
DRAUP : Auto Startup Report
The document provides an overview of the automotive startup landscape and emerging trends in automotive technology. Some key points:
- The automotive industry has evolved from craft production to mass production to lean manufacturing approaches, creating barriers for new startups.
- Automotive 3.0 focuses less on the vehicle and more on services like connectivity, ridesharing, and autonomous vehicles enabled by advances in software and mobile technology.
- The US, India, China, Israel and Germany have large numbers of automotive startups concentrated in areas like transportation technology, electric vehicles, and connected cars. Total funding for automotive startups has grown significantly from $18B in 2010 to over $40B in 2016.
How to Land that First Customer
This document provides tips for landing a first customer. It advises starting by offering potential customers a simple, free piece of help related to the problem being solved rather than immediately introducing the product or service. This builds trust by showing understanding of their complex needs. The next step is to listen to learn about their situation and solutions tried before leveling with them about options considered. The goal is for the customer and business to collaboratively develop a solution, with the business explaining what their product can and cannot do. Introducing the product fully only after understanding the customer's needs and determining if trust has been built.
Factory inv ret roi inv 3.4 bn$
LOW CARBON TECHNOLOGY
DOUBLE SPEED, 1/3 FUEL for SAME TON-HP TRANSPORT
6 time kmpl, 1/6 CO2e g/km
Andy transport no ghge
The document proposes a new transportation system called Andy Transport that uses water jet propulsion instead of engines or fuel. It would use the hydro-static pressure from a water column at 6000 meters depth to power vehicles like cars, trucks, trains, ships, jets, missiles, and rockets. It claims this system would have no emissions, low costs, high returns on investment, and could travel on land and water. It provides examples of potential vehicle specifications and performance metrics like tonnage, speed, power output, operating costs, fares, and return on investment.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Coal, crude oil fuel in diesel engine.ppt
The document discusses using various solid and liquid fuels such as coal, crude oil, and furnace oil to power diesel engines in automobiles and other vehicles. It states that these raw fuels can be directly burned in an open rotary furnace at normal temperature and pressure to produce hot gases that are then fed into a diesel engine. It compares the costs of using different fuels like coal, diesel, furnace oil, and crude oil to power a 2-ton car with a 100hp engine. It also provides contact information for Andy Appan, a 50-year expert in India.
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Carbon dioxide levels in the atmosphere have reached 120 parts per million, according to measurements. This concentration of CO2 exceeds pre-industrial levels and is largely due to human activities like burning fossil fuels. If emissions continue unchecked, climate change effects are expected to intensify and become more damaging.
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
No carbon technology for Tranport, Power Plant GHGe 120 ppm
no carbon all transports , power plant
fare 1c/km; ppa : 3c/kwh, 30$/mwh
automotive,rail,ship,jet,missile,rockt
ghge reduction 25 bnt/yr. ghge= 120 ppm
catapult renewable energy 1.23 mn lbs/sft thrust
from 6000 m deth water 6000 t/sqm
inv 120 bn$. pat 240 bn$/yr in 4 yrs
No carbon technology
This document describes a renewable energy technology called a catapult water jet that uses water pressure from deep ocean depths to generate thrust and power without engines or fuel. Some key points:
- It uses water pumped from 6000m depths with 6000 tons/sqm pressure (600kg/sqcm) for thrust and to power vehicles, ships, and power plants.
- It can be used for transportation including cars, trucks, trains, ships, jets, missiles and rockets with 50% lower capex and opex than traditional methods and 50% higher speed for the same horsepower.
- It can also be used for power generation in plants using Pelton water turbines with varying diameters and widths. A
Csp solar furnace, cupola. 750 'c 15 mn 'c
This document contains tables of data with calculations for the CSP solar furnace cupola with varying diameters (D) and material thicknesses (d) measured in mm. It lists the resulting spot temperature (SPOT °C) for different configurations ranging from diameters of 10-30 mm and thicknesses of 0.043-2.0 mm. The document is signed by Muthukal Andy Appan, an expert in Chennai, India with 50 years of experience.
Csp solar 15 mn 'c sun
This document contains data measuring the cooling rate of a material as the diameter of a hole in the material is increased from 0.01 mm to 0.1 mm in increments of 0.01 mm or 0.02 mm. The cooling rate is reported in °C/min for each hole diameter when the material is cooled from 30°C. Smaller hole diameters resulted in higher cooling rates.
Andy transport power plant technology 12 bn$
This document outlines royalty terms and investment details for a new transport and power plant technology called Andy Engine. Key points:
- Royalty terms are proposed at 70:30 or 90:10 split, with repayment of investments at 50% interest over 2, 4, or 6 years.
- The technology is currently at the idea stage and needs a prototype demonstration at 1/100 scale. It involves retrofitting Andy Engines, Bearings, and Jets externally to vehicles and power plants.
- It claims to provide double the speed and 1/3 the fuel consumption compared to traditional engines for the same power. It can use all solid, liquid, and gaseous fuels in their raw condition.
Andy tech auto, rail, ship, jet, missile, fso
The document discusses various modes of transportation including automotive, rail, ship, floating storage and offloading units, jets, missiles, and rockets. It provides specifications on fuel efficiency measured in kilometers per liter or metric tons for different vehicle types like cars, trucks, trains, ships, and jets. It also lists technical details of Andy Technology which can double speeds and reduce fuel consumption by 1/3 for the same ton-horsepower compared to conventional engines, bearings, and jets. The document is authored by Mutukal Andy Appan, an Indian mechanical engineering expert with 50 years of experience.
Business plan 100 mn$
Andy Technology provides innovative designs for low-cost, low-carbon, and high-speed transportation and power solutions. Key concepts include an Andy Engine that can run on all fuel sources using 1/3 the fuel and space as conventional engines, Andy Bearings that reduce friction to double or triple speeds of vehicles, and Andy Jets that further boost speeds. When applied to trucks, ferries, and ships, these technologies yield 864-3200% returns on investment with double speeds and 1/3 the fuel use. The designs also enable mega-structures like 1000m tall towers and 1000m x 1000m hanging structures to be built without scaffolding. Overall, Andy Technology aims to solve problems across engines, transportation, and construction
Business inv, ret, re paid1
The document outlines various investment amounts, returns, and repayment timelines. It then discusses technologies that can double speed while using one-third the fuel for the same horsepower output. These technologies allow vehicles to achieve higher speeds including 200 kph for automotive, 300-600 kph for rail, 330-660 knots for ships, and up to supersonic and hypersonic speeds for other vehicles. It is signed by an Indian expert in automotive, bullet trains, ships, and sea missiles.
Automotive royalty
This document outlines royalty rates in rupees for various vehicles with different engine capacities and weights, including mopeds, bikes, cars, trucks, and trailers. Royalties are paid monthly at the beginning of each month based on 3 months of advanced production value to Muthukal Andy Appan, a 50-year-old mechanical engineering expert in Chennai, India.
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Bike 100 cc 33 % fuel
The document compares the specifications of three bikes: Data Bike, Andy, and Andy. Andy has a smaller engine size of 33cc compared to 100cc for the other two bikes, but has higher fuel efficiency of 360 kmpl versus 60-120 kmpl for the others. It can achieve the same ton-kph and ton-kpl as the other bikes using only 1/3 the fuel. The inventor, Muthukal Andy Appan, has received a 502,000$ venture fund for his Andy Technology that aims to design automotives with low carbon emissions.
Formula 1 800 hp...2400 cc same hp, 2 x speed
This document compares the specifications of a Formula 1 car and an experimental car designed by Andy Technology. The experimental car has the same power and volume as a Formula 1 car but can achieve double the top speed and is more fuel efficient, producing fewer emissions. It is estimated to win a race by 12-13 laps using a design with low rolling friction at the front wheels.
Formula 1 800 hp..800 cc same hp, 2 x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Truck 15 t,
The document compares the specifications of two trucks - a standard Data Truck and an improved Andy Truck. The Andy Truck has equivalent power and volume but significantly higher speed, fuel efficiency, payload capacity, and acceleration due to improvements in technology and design that reduce CO2 emissions and braking distance. The document was authored by an automotive expert evaluating low carbon truck design alternatives.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
More Related Content
More from Muthukal Appan
Factory inv ret roi inv 3.4 bn$
LOW CARBON TECHNOLOGY
DOUBLE SPEED, 1/3 FUEL for SAME TON-HP TRANSPORT
6 time kmpl, 1/6 CO2e g/km
Andy transport no ghge
The document proposes a new transportation system called Andy Transport that uses water jet propulsion instead of engines or fuel. It would use the hydro-static pressure from a water column at 6000 meters depth to power vehicles like cars, trucks, trains, ships, jets, missiles, and rockets. It claims this system would have no emissions, low costs, high returns on investment, and could travel on land and water. It provides examples of potential vehicle specifications and performance metrics like tonnage, speed, power output, operating costs, fares, and return on investment.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Coal, crude oil fuel in diesel engine.ppt
The document discusses using various solid and liquid fuels such as coal, crude oil, and furnace oil to power diesel engines in automobiles and other vehicles. It states that these raw fuels can be directly burned in an open rotary furnace at normal temperature and pressure to produce hot gases that are then fed into a diesel engine. It compares the costs of using different fuels like coal, diesel, furnace oil, and crude oil to power a 2-ton car with a 100hp engine. It also provides contact information for Andy Appan, a 50-year expert in India.
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Carbon dioxide levels in the atmosphere have reached 120 parts per million, according to measurements. This concentration of CO2 exceeds pre-industrial levels and is largely due to human activities like burning fossil fuels. If emissions continue unchecked, climate change effects are expected to intensify and become more damaging.
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
No carbon technology for Tranport, Power Plant GHGe 120 ppm
no carbon all transports , power plant
fare 1c/km; ppa : 3c/kwh, 30$/mwh
automotive,rail,ship,jet,missile,rockt
ghge reduction 25 bnt/yr. ghge= 120 ppm
catapult renewable energy 1.23 mn lbs/sft thrust
from 6000 m deth water 6000 t/sqm
inv 120 bn$. pat 240 bn$/yr in 4 yrs
No carbon technology
This document describes a renewable energy technology called a catapult water jet that uses water pressure from deep ocean depths to generate thrust and power without engines or fuel. Some key points:
- It uses water pumped from 6000m depths with 6000 tons/sqm pressure (600kg/sqcm) for thrust and to power vehicles, ships, and power plants.
- It can be used for transportation including cars, trucks, trains, ships, jets, missiles and rockets with 50% lower capex and opex than traditional methods and 50% higher speed for the same horsepower.
- It can also be used for power generation in plants using Pelton water turbines with varying diameters and widths. A
Csp solar furnace, cupola. 750 'c 15 mn 'c
This document contains tables of data with calculations for the CSP solar furnace cupola with varying diameters (D) and material thicknesses (d) measured in mm. It lists the resulting spot temperature (SPOT °C) for different configurations ranging from diameters of 10-30 mm and thicknesses of 0.043-2.0 mm. The document is signed by Muthukal Andy Appan, an expert in Chennai, India with 50 years of experience.
Csp solar 15 mn 'c sun
This document contains data measuring the cooling rate of a material as the diameter of a hole in the material is increased from 0.01 mm to 0.1 mm in increments of 0.01 mm or 0.02 mm. The cooling rate is reported in °C/min for each hole diameter when the material is cooled from 30°C. Smaller hole diameters resulted in higher cooling rates.
Andy transport power plant technology 12 bn$
This document outlines royalty terms and investment details for a new transport and power plant technology called Andy Engine. Key points:
- Royalty terms are proposed at 70:30 or 90:10 split, with repayment of investments at 50% interest over 2, 4, or 6 years.
- The technology is currently at the idea stage and needs a prototype demonstration at 1/100 scale. It involves retrofitting Andy Engines, Bearings, and Jets externally to vehicles and power plants.
- It claims to provide double the speed and 1/3 the fuel consumption compared to traditional engines for the same power. It can use all solid, liquid, and gaseous fuels in their raw condition.
Andy tech auto, rail, ship, jet, missile, fso
The document discusses various modes of transportation including automotive, rail, ship, floating storage and offloading units, jets, missiles, and rockets. It provides specifications on fuel efficiency measured in kilometers per liter or metric tons for different vehicle types like cars, trucks, trains, ships, and jets. It also lists technical details of Andy Technology which can double speeds and reduce fuel consumption by 1/3 for the same ton-horsepower compared to conventional engines, bearings, and jets. The document is authored by Mutukal Andy Appan, an Indian mechanical engineering expert with 50 years of experience.
Business plan 100 mn$
Andy Technology provides innovative designs for low-cost, low-carbon, and high-speed transportation and power solutions. Key concepts include an Andy Engine that can run on all fuel sources using 1/3 the fuel and space as conventional engines, Andy Bearings that reduce friction to double or triple speeds of vehicles, and Andy Jets that further boost speeds. When applied to trucks, ferries, and ships, these technologies yield 864-3200% returns on investment with double speeds and 1/3 the fuel use. The designs also enable mega-structures like 1000m tall towers and 1000m x 1000m hanging structures to be built without scaffolding. Overall, Andy Technology aims to solve problems across engines, transportation, and construction
Business inv, ret, re paid1
The document outlines various investment amounts, returns, and repayment timelines. It then discusses technologies that can double speed while using one-third the fuel for the same horsepower output. These technologies allow vehicles to achieve higher speeds including 200 kph for automotive, 300-600 kph for rail, 330-660 knots for ships, and up to supersonic and hypersonic speeds for other vehicles. It is signed by an Indian expert in automotive, bullet trains, ships, and sea missiles.
Automotive royalty
This document outlines royalty rates in rupees for various vehicles with different engine capacities and weights, including mopeds, bikes, cars, trucks, and trailers. Royalties are paid monthly at the beginning of each month based on 3 months of advanced production value to Muthukal Andy Appan, a 50-year-old mechanical engineering expert in Chennai, India.
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Bike 100 cc 33 % fuel
The document compares the specifications of three bikes: Data Bike, Andy, and Andy. Andy has a smaller engine size of 33cc compared to 100cc for the other two bikes, but has higher fuel efficiency of 360 kmpl versus 60-120 kmpl for the others. It can achieve the same ton-kph and ton-kpl as the other bikes using only 1/3 the fuel. The inventor, Muthukal Andy Appan, has received a 502,000$ venture fund for his Andy Technology that aims to design automotives with low carbon emissions.
Formula 1 800 hp...2400 cc same hp, 2 x speed
This document compares the specifications of a Formula 1 car and an experimental car designed by Andy Technology. The experimental car has the same power and volume as a Formula 1 car but can achieve double the top speed and is more fuel efficient, producing fewer emissions. It is estimated to win a race by 12-13 laps using a design with low rolling friction at the front wheels.
Formula 1 800 hp..800 cc same hp, 2 x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Truck 15 t,
The document compares the specifications of two trucks - a standard Data Truck and an improved Andy Truck. The Andy Truck has equivalent power and volume but significantly higher speed, fuel efficiency, payload capacity, and acceleration due to improvements in technology and design that reduce CO2 emissions and braking distance. The document was authored by an automotive expert evaluating low carbon truck design alternatives.
More from Muthukal Appan (20)
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Stop solar. wind, fuel energy sources. gh ge 120 ppm
No carbon technology for Tranport, Power Plant GHGe 120 ppm
No carbon technology for Tranport, Power Plant GHGe 120 ppm
Recently uploaded
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Recently uploaded (20)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Automotive startup 2mn$
- 1. Andy Technology. Automotive Low Carbon Design. Same Engine, Same Fuel. “ Double Speed for same Ton-HP “ On Low Rolling Friction at IDLE Wheels by Andy Bearing 2x Speed, 2x kmpl, 50 % of normal Co2e g/km Cost : Bike-1000$; Car-12,000$; Truck-50,000$ . Bike 200 kg, 8 hp, 200kmph 120 kmpl 19.4g/km Car 2t, 100 hp, 200kmph, 20 kmpl 116.g/km Truck 15t, 240 hp, 200kmph. 10 kmpl 233.g/km Venture Demo Fund: 200,000 $. 6 months. Startup Invest 2 Mn$, 1 Yr Repaid 3 Mn$ in 1 Yr. Muthukal Andy Appan, M.E, 50 yrs. Expert, Chennai. India