Formula 1 800 hp..800 cc same hp, 2 x speed
•
0 likes•218 views
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Report
Share
Report
Share
Download to read offline
Recommended
Formula 1 1600 hp...2400 cc 1.5x hp, 3x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. The Formula 1 car has 1200 hp, reaches 900 kph, and can complete laps 30 seconds faster than the regular car due to its higher power, lower weight, and improved fuel efficiency. Andy Technology proposes a new design that aims to achieve 1.5 times the power and 3 times the speed of current Formula 1 cars through advances like low rolling friction at the front wheels.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Automotive
The document describes Andy's new designs for vehicles that significantly improve fuel efficiency and reduce emissions compared to current designs. Andy's bike design uses 1/3 the fuel and emits 1/6 the CO2 while achieving double the speed. His car and truck designs also use less fuel, produce fewer emissions, and have higher fuel efficiency and speeds than current designs. The document also briefly outlines Andy's new sea vehicle design with a single axle and front steering and rear propulsion without rear wheels. Andy's engine can use all fuels and is smaller than current engines but provides comparable power output. Production of Andy's vehicles is estimated to require investments of $30-100 million but yield profits of $150-200 million.
Automotive car 60 kmpl
The document describes an automotive technology that can achieve 60 kilometers per liter of fuel (kmpl) efficiency. The technology was developed by Andy Transport Technology and uses an Andy Engine and Andy Bearing components. It can achieve double the speed and use 1/3 the fuel compared to traditional engines per ton-horsepower. The technology results in 6 times the fuel efficiency, 33% lower carbon emissions, and 66% lower cost of energy. It can power a car to travel 200 kph using only 10/3 or 3.33 liters of fuel per hour, achieving a fuel efficiency of 60 kmpl. The cost of the technology is $15,000 and it produces 7750 grams of carbon emissions per hour. The
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Bike 100 cc 33 % fuel
The document compares the specifications of three bikes: Data Bike, Andy, and Andy. Andy has a smaller engine size of 33cc compared to 100cc for the other two bikes, but has higher fuel efficiency of 360 kmpl versus 60-120 kmpl for the others. It can achieve the same ton-kph and ton-kpl as the other bikes using only 1/3 the fuel. The inventor, Muthukal Andy Appan, has received a 502,000$ venture fund for his Andy Technology that aims to design automotives with low carbon emissions.
Andy rail mono, bullet, land-sea craft1
Three sentences summarizing the key details:
The document describes Andy Rail, a new transportation system designed by M.A. Appan that can operate on both rail and land at speeds up to 600 kmph on rail and 820 kmph on land using the same horsepower, with tracks ranging from 2.5 to 50 meters long. It provides comparisons showing Andy Rail uses 1/3 the fuel and has 9 times greater fuel efficiency than current systems for the same tonnage and horsepower while carrying more weight and traveling at triple the speed. The increased efficiency is achieved through reductions in rolling friction at wheels, drag, and pressure at the nose.
X Prize Automotive
- The document describes a new automotive design by Andy Technology that runs on all fuels including solids, liquids, and gases. It consists of an Andy engine, Andy bearing, and jet components.
- The key advantages of the Andy design are higher speed (up to 166 kph), higher mileage (500% more), and lower fare (1/10 the cost per km) compared to conventional vehicles. It also uses 1/3 the volume of fuel and has 1/3 the CO2 emissions and 2/3 higher efficiency.
- Applying the Andy Technology could save billions per day in fuel costs and reduce CO2 emissions globally for automotive, rail, shipping, power plants and other sectors.
Recommended
Formula 1 1600 hp...2400 cc 1.5x hp, 3x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. The Formula 1 car has 1200 hp, reaches 900 kph, and can complete laps 30 seconds faster than the regular car due to its higher power, lower weight, and improved fuel efficiency. Andy Technology proposes a new design that aims to achieve 1.5 times the power and 3 times the speed of current Formula 1 cars through advances like low rolling friction at the front wheels.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Automotive
The document describes Andy's new designs for vehicles that significantly improve fuel efficiency and reduce emissions compared to current designs. Andy's bike design uses 1/3 the fuel and emits 1/6 the CO2 while achieving double the speed. His car and truck designs also use less fuel, produce fewer emissions, and have higher fuel efficiency and speeds than current designs. The document also briefly outlines Andy's new sea vehicle design with a single axle and front steering and rear propulsion without rear wheels. Andy's engine can use all fuels and is smaller than current engines but provides comparable power output. Production of Andy's vehicles is estimated to require investments of $30-100 million but yield profits of $150-200 million.
Automotive car 60 kmpl
The document describes an automotive technology that can achieve 60 kilometers per liter of fuel (kmpl) efficiency. The technology was developed by Andy Transport Technology and uses an Andy Engine and Andy Bearing components. It can achieve double the speed and use 1/3 the fuel compared to traditional engines per ton-horsepower. The technology results in 6 times the fuel efficiency, 33% lower carbon emissions, and 66% lower cost of energy. It can power a car to travel 200 kph using only 10/3 or 3.33 liters of fuel per hour, achieving a fuel efficiency of 60 kmpl. The cost of the technology is $15,000 and it produces 7750 grams of carbon emissions per hour. The
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Bike 100 cc 33 % fuel
The document compares the specifications of three bikes: Data Bike, Andy, and Andy. Andy has a smaller engine size of 33cc compared to 100cc for the other two bikes, but has higher fuel efficiency of 360 kmpl versus 60-120 kmpl for the others. It can achieve the same ton-kph and ton-kpl as the other bikes using only 1/3 the fuel. The inventor, Muthukal Andy Appan, has received a 502,000$ venture fund for his Andy Technology that aims to design automotives with low carbon emissions.
Andy rail mono, bullet, land-sea craft1
Three sentences summarizing the key details:
The document describes Andy Rail, a new transportation system designed by M.A. Appan that can operate on both rail and land at speeds up to 600 kmph on rail and 820 kmph on land using the same horsepower, with tracks ranging from 2.5 to 50 meters long. It provides comparisons showing Andy Rail uses 1/3 the fuel and has 9 times greater fuel efficiency than current systems for the same tonnage and horsepower while carrying more weight and traveling at triple the speed. The increased efficiency is achieved through reductions in rolling friction at wheels, drag, and pressure at the nose.
X Prize Automotive
- The document describes a new automotive design by Andy Technology that runs on all fuels including solids, liquids, and gases. It consists of an Andy engine, Andy bearing, and jet components.
- The key advantages of the Andy design are higher speed (up to 166 kph), higher mileage (500% more), and lower fare (1/10 the cost per km) compared to conventional vehicles. It also uses 1/3 the volume of fuel and has 1/3 the CO2 emissions and 2/3 higher efficiency.
- Applying the Andy Technology could save billions per day in fuel costs and reduce CO2 emissions globally for automotive, rail, shipping, power plants and other sectors.
Honda motorcycles v.2
This document summarizes the history of Honda motorcycles in Thailand and their technology. It discusses how Honda was established in Thailand in 1946 and became the number one motorcycle distributor through A.P. Honda Company Limited, which was founded in 1986. The technology section focuses on idling stop systems that save fuel, dual clutch transmission for smooth shifting, and electronically controlled ABS. It also categorizes Honda motorcycles into families, A.T., sports, and big bike classes to suit different lifestyles.
Honda hr
The document summarizes a case study about labor unrest at Honda Motorcycle & Scooter India's (HMSI) plant in Gurgaon, Haryana in 2005. Workers protested violently over low wages and poor working conditions, disrupting production. This followed six months of simmering unrest over rejected wage increase demands.
The document then lists relevant labor laws and human resource management topics connected to the issues. Finally, it presents two questions - one discussing challenges of labor unrest and resolution approaches, the other critically analyzing HMSI's decision to set up plants outside Haryana given widespread Indian labor unrest. Resolution approaches emphasized setting up grievance mechanisms, addressing conditions and wages, ensuring participation, and strong communication channels
Conflict Management-Honda Motorcycle & Scooter India Pvt Ltd.
This document discusses conflict management practices at Honda Motorcycle and Scooter India Pvt. Ltd. (HMSI). It outlines HMSI's human resource policies, which initially lacked understanding of Indian work culture and failed to address employee needs. This led to unrest among workers regarding issues like Diwali bonuses and overtime. The conflict escalated, slowing production. After negotiations, HMSI made concessions like allowing an employee union, improving communication, and addressing bonuses and overtime. The document recommends training managers in conflict management and improving transparency and flexibility in HR policies to prevent future conflicts.
People management fiasco @ hmsi by Prem Giri
Honda established a manufacturing plant in Manesar, India in 1999. Initially, the workforce consisted of 1000 confirmed workers and 700 contract workers. Tensions rose between management and workers regarding stringent rules and the authority of managers. This led workers to push for unionization in 2004. Negotiations were unsuccessful, resulting in worker protests and police violence against workers in July 2005. After government intervention, workers resumed work in August 2005 with some concessions achieved. However, underlying issues around communication, managerial practices, and the treatment of workers persisted.
Honda Management and Organization
Honda was founded in 1948 and is known for manufacturing automobiles and motorcycles. It uses planning, organizing, leading, and controlling to coordinate work activities and accomplish goals efficiently. Honda develops flexible plans and involves staff in planning. It places specialists globally and uses team leadership. Honda also controls machines through human monitoring. It aims to supply high-quality, reasonably priced products for customer satisfaction.
Honda Report On Paint
This document is a summer training report submitted by Saurabh Khurana, a mechanical engineering student at SRM University, for his internship at Honda Motorcycle and Scooter India Private Limited (HMSI). The report contains an introduction to HMSI, including its history, products, management structure, and facilities. It also describes the plant layout and production flow at HMSI. The report is divided into several chapters that will cover topics like the paint department processes, a project on direct pass ratio, and conclusions from the training.
Honda Company Slideshow
Soichiro Honda established Honda Technical Research Institute in 1946 and the company produced its first product, a bicycle engine, in 1947. Honda began motorcycle production in 1960 and released its first sports car in 1963. It found success in the United States with the Civic debuting in 1972 and ranking first in fuel economy tests in 1977. Honda remains headquartered in Tokyo and has become a major global automaker known for reliability, resale value, and performance.
Honda presentation
Honda is a large Japanese manufacturer of automobiles and motorcycles. It employs over 179,000 people and has subsidiaries like Acura. Honda implements total quality management to continuously improve products and processes. This involves management, workforce, suppliers, and customers. Honda uses a quality cycle and quality enhancement system to implement TQM using methods like the PDCA cycle to bridge gaps between targets and current performance. Honda also provides quality management education to improve worker skills. Honda recalled over 962,000 vehicles globally to repair power window problems.
Honda ppt
This document discusses three Honda products - the Activa scooter, Unicorn motorcycle, and CB 1000R motorcycle. It provides details on each product like launch year, key features, pricing strategy used, and promotional activities. For the Activa, it mentions the first scooter launched by Honda in India in 2001. For the Unicorn, it highlights the mono-suspension design. And for the CB 1000R, it focuses on the powerful engine and transmission system.
Factory inv ret roi inv 3.4 bn$
LOW CARBON TECHNOLOGY
DOUBLE SPEED, 1/3 FUEL for SAME TON-HP TRANSPORT
6 time kmpl, 1/6 CO2e g/km
Andy transport no ghge
The document proposes a new transportation system called Andy Transport that uses water jet propulsion instead of engines or fuel. It would use the hydro-static pressure from a water column at 6000 meters depth to power vehicles like cars, trucks, trains, ships, jets, missiles, and rockets. It claims this system would have no emissions, low costs, high returns on investment, and could travel on land and water. It provides examples of potential vehicle specifications and performance metrics like tonnage, speed, power output, operating costs, fares, and return on investment.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Coal, crude oil fuel in diesel engine.ppt
The document discusses using various solid and liquid fuels such as coal, crude oil, and furnace oil to power diesel engines in automobiles and other vehicles. It states that these raw fuels can be directly burned in an open rotary furnace at normal temperature and pressure to produce hot gases that are then fed into a diesel engine. It compares the costs of using different fuels like coal, diesel, furnace oil, and crude oil to power a 2-ton car with a 100hp engine. It also provides contact information for Andy Appan, a 50-year expert in India.
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Carbon dioxide levels in the atmosphere have reached 120 parts per million, according to measurements. This concentration of CO2 exceeds pre-industrial levels and is largely due to human activities like burning fossil fuels. If emissions continue unchecked, climate change effects are expected to intensify and become more damaging.
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
No carbon technology for Tranport, Power Plant GHGe 120 ppm
no carbon all transports , power plant
fare 1c/km; ppa : 3c/kwh, 30$/mwh
automotive,rail,ship,jet,missile,rockt
ghge reduction 25 bnt/yr. ghge= 120 ppm
catapult renewable energy 1.23 mn lbs/sft thrust
from 6000 m deth water 6000 t/sqm
inv 120 bn$. pat 240 bn$/yr in 4 yrs
No carbon technology
This document describes a renewable energy technology called a catapult water jet that uses water pressure from deep ocean depths to generate thrust and power without engines or fuel. Some key points:
- It uses water pumped from 6000m depths with 6000 tons/sqm pressure (600kg/sqcm) for thrust and to power vehicles, ships, and power plants.
- It can be used for transportation including cars, trucks, trains, ships, jets, missiles and rockets with 50% lower capex and opex than traditional methods and 50% higher speed for the same horsepower.
- It can also be used for power generation in plants using Pelton water turbines with varying diameters and widths. A
Csp solar furnace, cupola. 750 'c 15 mn 'c
This document contains tables of data with calculations for the CSP solar furnace cupola with varying diameters (D) and material thicknesses (d) measured in mm. It lists the resulting spot temperature (SPOT °C) for different configurations ranging from diameters of 10-30 mm and thicknesses of 0.043-2.0 mm. The document is signed by Muthukal Andy Appan, an expert in Chennai, India with 50 years of experience.
Csp solar 15 mn 'c sun
This document contains data measuring the cooling rate of a material as the diameter of a hole in the material is increased from 0.01 mm to 0.1 mm in increments of 0.01 mm or 0.02 mm. The cooling rate is reported in °C/min for each hole diameter when the material is cooled from 30°C. Smaller hole diameters resulted in higher cooling rates.
Andy transport power plant technology 12 bn$
This document outlines royalty terms and investment details for a new transport and power plant technology called Andy Engine. Key points:
- Royalty terms are proposed at 70:30 or 90:10 split, with repayment of investments at 50% interest over 2, 4, or 6 years.
- The technology is currently at the idea stage and needs a prototype demonstration at 1/100 scale. It involves retrofitting Andy Engines, Bearings, and Jets externally to vehicles and power plants.
- It claims to provide double the speed and 1/3 the fuel consumption compared to traditional engines for the same power. It can use all solid, liquid, and gaseous fuels in their raw condition.
Andy tech auto, rail, ship, jet, missile, fso
The document discusses various modes of transportation including automotive, rail, ship, floating storage and offloading units, jets, missiles, and rockets. It provides specifications on fuel efficiency measured in kilometers per liter or metric tons for different vehicle types like cars, trucks, trains, ships, and jets. It also lists technical details of Andy Technology which can double speeds and reduce fuel consumption by 1/3 for the same ton-horsepower compared to conventional engines, bearings, and jets. The document is authored by Mutukal Andy Appan, an Indian mechanical engineering expert with 50 years of experience.
Business plan 100 mn$
Andy Technology provides innovative designs for low-cost, low-carbon, and high-speed transportation and power solutions. Key concepts include an Andy Engine that can run on all fuel sources using 1/3 the fuel and space as conventional engines, Andy Bearings that reduce friction to double or triple speeds of vehicles, and Andy Jets that further boost speeds. When applied to trucks, ferries, and ships, these technologies yield 864-3200% returns on investment with double speeds and 1/3 the fuel use. The designs also enable mega-structures like 1000m tall towers and 1000m x 1000m hanging structures to be built without scaffolding. Overall, Andy Technology aims to solve problems across engines, transportation, and construction
More Related Content
Viewers also liked
Honda motorcycles v.2
This document summarizes the history of Honda motorcycles in Thailand and their technology. It discusses how Honda was established in Thailand in 1946 and became the number one motorcycle distributor through A.P. Honda Company Limited, which was founded in 1986. The technology section focuses on idling stop systems that save fuel, dual clutch transmission for smooth shifting, and electronically controlled ABS. It also categorizes Honda motorcycles into families, A.T., sports, and big bike classes to suit different lifestyles.
Honda hr
The document summarizes a case study about labor unrest at Honda Motorcycle & Scooter India's (HMSI) plant in Gurgaon, Haryana in 2005. Workers protested violently over low wages and poor working conditions, disrupting production. This followed six months of simmering unrest over rejected wage increase demands.
The document then lists relevant labor laws and human resource management topics connected to the issues. Finally, it presents two questions - one discussing challenges of labor unrest and resolution approaches, the other critically analyzing HMSI's decision to set up plants outside Haryana given widespread Indian labor unrest. Resolution approaches emphasized setting up grievance mechanisms, addressing conditions and wages, ensuring participation, and strong communication channels
Conflict Management-Honda Motorcycle & Scooter India Pvt Ltd.
This document discusses conflict management practices at Honda Motorcycle and Scooter India Pvt. Ltd. (HMSI). It outlines HMSI's human resource policies, which initially lacked understanding of Indian work culture and failed to address employee needs. This led to unrest among workers regarding issues like Diwali bonuses and overtime. The conflict escalated, slowing production. After negotiations, HMSI made concessions like allowing an employee union, improving communication, and addressing bonuses and overtime. The document recommends training managers in conflict management and improving transparency and flexibility in HR policies to prevent future conflicts.
People management fiasco @ hmsi by Prem Giri
Honda established a manufacturing plant in Manesar, India in 1999. Initially, the workforce consisted of 1000 confirmed workers and 700 contract workers. Tensions rose between management and workers regarding stringent rules and the authority of managers. This led workers to push for unionization in 2004. Negotiations were unsuccessful, resulting in worker protests and police violence against workers in July 2005. After government intervention, workers resumed work in August 2005 with some concessions achieved. However, underlying issues around communication, managerial practices, and the treatment of workers persisted.
Honda Management and Organization
Honda was founded in 1948 and is known for manufacturing automobiles and motorcycles. It uses planning, organizing, leading, and controlling to coordinate work activities and accomplish goals efficiently. Honda develops flexible plans and involves staff in planning. It places specialists globally and uses team leadership. Honda also controls machines through human monitoring. It aims to supply high-quality, reasonably priced products for customer satisfaction.
Honda Report On Paint
This document is a summer training report submitted by Saurabh Khurana, a mechanical engineering student at SRM University, for his internship at Honda Motorcycle and Scooter India Private Limited (HMSI). The report contains an introduction to HMSI, including its history, products, management structure, and facilities. It also describes the plant layout and production flow at HMSI. The report is divided into several chapters that will cover topics like the paint department processes, a project on direct pass ratio, and conclusions from the training.
Honda Company Slideshow
Soichiro Honda established Honda Technical Research Institute in 1946 and the company produced its first product, a bicycle engine, in 1947. Honda began motorcycle production in 1960 and released its first sports car in 1963. It found success in the United States with the Civic debuting in 1972 and ranking first in fuel economy tests in 1977. Honda remains headquartered in Tokyo and has become a major global automaker known for reliability, resale value, and performance.
Honda presentation
Honda is a large Japanese manufacturer of automobiles and motorcycles. It employs over 179,000 people and has subsidiaries like Acura. Honda implements total quality management to continuously improve products and processes. This involves management, workforce, suppliers, and customers. Honda uses a quality cycle and quality enhancement system to implement TQM using methods like the PDCA cycle to bridge gaps between targets and current performance. Honda also provides quality management education to improve worker skills. Honda recalled over 962,000 vehicles globally to repair power window problems.
Honda ppt
This document discusses three Honda products - the Activa scooter, Unicorn motorcycle, and CB 1000R motorcycle. It provides details on each product like launch year, key features, pricing strategy used, and promotional activities. For the Activa, it mentions the first scooter launched by Honda in India in 2001. For the Unicorn, it highlights the mono-suspension design. And for the CB 1000R, it focuses on the powerful engine and transmission system.
Viewers also liked (9)
Conflict Management-Honda Motorcycle & Scooter India Pvt Ltd.
Conflict Management-Honda Motorcycle & Scooter India Pvt Ltd.
More from Muthukal Appan
Factory inv ret roi inv 3.4 bn$
LOW CARBON TECHNOLOGY
DOUBLE SPEED, 1/3 FUEL for SAME TON-HP TRANSPORT
6 time kmpl, 1/6 CO2e g/km
Andy transport no ghge
The document proposes a new transportation system called Andy Transport that uses water jet propulsion instead of engines or fuel. It would use the hydro-static pressure from a water column at 6000 meters depth to power vehicles like cars, trucks, trains, ships, jets, missiles, and rockets. It claims this system would have no emissions, low costs, high returns on investment, and could travel on land and water. It provides examples of potential vehicle specifications and performance metrics like tonnage, speed, power output, operating costs, fares, and return on investment.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Coal, crude oil fuel in diesel engine.ppt
The document discusses using various solid and liquid fuels such as coal, crude oil, and furnace oil to power diesel engines in automobiles and other vehicles. It states that these raw fuels can be directly burned in an open rotary furnace at normal temperature and pressure to produce hot gases that are then fed into a diesel engine. It compares the costs of using different fuels like coal, diesel, furnace oil, and crude oil to power a 2-ton car with a 100hp engine. It also provides contact information for Andy Appan, a 50-year expert in India.
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Carbon dioxide levels in the atmosphere have reached 120 parts per million, according to measurements. This concentration of CO2 exceeds pre-industrial levels and is largely due to human activities like burning fossil fuels. If emissions continue unchecked, climate change effects are expected to intensify and become more damaging.
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
No carbon technology for Tranport, Power Plant GHGe 120 ppm
no carbon all transports , power plant
fare 1c/km; ppa : 3c/kwh, 30$/mwh
automotive,rail,ship,jet,missile,rockt
ghge reduction 25 bnt/yr. ghge= 120 ppm
catapult renewable energy 1.23 mn lbs/sft thrust
from 6000 m deth water 6000 t/sqm
inv 120 bn$. pat 240 bn$/yr in 4 yrs
No carbon technology
This document describes a renewable energy technology called a catapult water jet that uses water pressure from deep ocean depths to generate thrust and power without engines or fuel. Some key points:
- It uses water pumped from 6000m depths with 6000 tons/sqm pressure (600kg/sqcm) for thrust and to power vehicles, ships, and power plants.
- It can be used for transportation including cars, trucks, trains, ships, jets, missiles and rockets with 50% lower capex and opex than traditional methods and 50% higher speed for the same horsepower.
- It can also be used for power generation in plants using Pelton water turbines with varying diameters and widths. A
Csp solar furnace, cupola. 750 'c 15 mn 'c
This document contains tables of data with calculations for the CSP solar furnace cupola with varying diameters (D) and material thicknesses (d) measured in mm. It lists the resulting spot temperature (SPOT °C) for different configurations ranging from diameters of 10-30 mm and thicknesses of 0.043-2.0 mm. The document is signed by Muthukal Andy Appan, an expert in Chennai, India with 50 years of experience.
Csp solar 15 mn 'c sun
This document contains data measuring the cooling rate of a material as the diameter of a hole in the material is increased from 0.01 mm to 0.1 mm in increments of 0.01 mm or 0.02 mm. The cooling rate is reported in °C/min for each hole diameter when the material is cooled from 30°C. Smaller hole diameters resulted in higher cooling rates.
Andy transport power plant technology 12 bn$
This document outlines royalty terms and investment details for a new transport and power plant technology called Andy Engine. Key points:
- Royalty terms are proposed at 70:30 or 90:10 split, with repayment of investments at 50% interest over 2, 4, or 6 years.
- The technology is currently at the idea stage and needs a prototype demonstration at 1/100 scale. It involves retrofitting Andy Engines, Bearings, and Jets externally to vehicles and power plants.
- It claims to provide double the speed and 1/3 the fuel consumption compared to traditional engines for the same power. It can use all solid, liquid, and gaseous fuels in their raw condition.
Andy tech auto, rail, ship, jet, missile, fso
The document discusses various modes of transportation including automotive, rail, ship, floating storage and offloading units, jets, missiles, and rockets. It provides specifications on fuel efficiency measured in kilometers per liter or metric tons for different vehicle types like cars, trucks, trains, ships, and jets. It also lists technical details of Andy Technology which can double speeds and reduce fuel consumption by 1/3 for the same ton-horsepower compared to conventional engines, bearings, and jets. The document is authored by Mutukal Andy Appan, an Indian mechanical engineering expert with 50 years of experience.
Business plan 100 mn$
Andy Technology provides innovative designs for low-cost, low-carbon, and high-speed transportation and power solutions. Key concepts include an Andy Engine that can run on all fuel sources using 1/3 the fuel and space as conventional engines, Andy Bearings that reduce friction to double or triple speeds of vehicles, and Andy Jets that further boost speeds. When applied to trucks, ferries, and ships, these technologies yield 864-3200% returns on investment with double speeds and 1/3 the fuel use. The designs also enable mega-structures like 1000m tall towers and 1000m x 1000m hanging structures to be built without scaffolding. Overall, Andy Technology aims to solve problems across engines, transportation, and construction
Automotive startup 2mn$
Andy Technology proposes a low carbon design that doubles vehicle speed and fuel efficiency while reducing CO2 emissions by 50% using low rolling friction idle wheels, with costs of $1,000 for bikes, $12,000 for cars, and $50,000 for trucks. A bike could travel 200kmph getting 120kmpl and emitting 19.4g/km of CO2, a car could travel 200kmph getting 20kmpl and emitting 116g/km of CO2, and a truck could travel 200kmph getting 10kmpl and emitting 233g/km of CO2. The venture requires $200,000 in demo funding for 6 months and $2 million in startup investment repayable after 1 year.
Business inv, ret, re paid1
The document outlines various investment amounts, returns, and repayment timelines. It then discusses technologies that can double speed while using one-third the fuel for the same horsepower output. These technologies allow vehicles to achieve higher speeds including 200 kph for automotive, 300-600 kph for rail, 330-660 knots for ships, and up to supersonic and hypersonic speeds for other vehicles. It is signed by an Indian expert in automotive, bullet trains, ships, and sea missiles.
Automotive royalty
This document outlines royalty rates in rupees for various vehicles with different engine capacities and weights, including mopeds, bikes, cars, trucks, and trailers. Royalties are paid monthly at the beginning of each month based on 3 months of advanced production value to Muthukal Andy Appan, a 50-year-old mechanical engineering expert in Chennai, India.
Formula 1 800 hp...2400 cc same hp, 2 x speed
This document compares the specifications of a Formula 1 car and an experimental car designed by Andy Technology. The experimental car has the same power and volume as a Formula 1 car but can achieve double the top speed and is more fuel efficient, producing fewer emissions. It is estimated to win a race by 12-13 laps using a design with low rolling friction at the front wheels.
Truck 15 t,
The document compares the specifications of two trucks - a standard Data Truck and an improved Andy Truck. The Andy Truck has equivalent power and volume but significantly higher speed, fuel efficiency, payload capacity, and acceleration due to improvements in technology and design that reduce CO2 emissions and braking distance. The document was authored by an automotive expert evaluating low carbon truck design alternatives.
Formula 1 2400 hp...2400 cc win by 12 25 laps
Andy Engine technology provides 3 times the power and 4 times the speed of conventional Formula 1 engines while using the same amount of fuel, allowing cars equipped with the Andy Engine to win races by 12-25 more laps and shave 20-40 seconds off lap times. The Andy Engine achieves greater efficiency through innovations that result in higher horsepower per fuel usage, tons per kilometer, and tons per kiloliter of fuel compared to conventional engines.
More from Muthukal Appan (19)
Stop solar. wind, fuel energy sources. gh ge 120 ppm
Stop solar. wind, fuel energy sources. gh ge 120 ppm
No carbon technology for Tranport, Power Plant GHGe 120 ppm
No carbon technology for Tranport, Power Plant GHGe 120 ppm
Recently uploaded
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
Recently uploaded (20)
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Formula 1 800 hp..800 cc same hp, 2 x speed
- 1. Data Formula1 Andy F1 Saved weight 600kg 600kg - power 800 hp 800hp - Volume 2400cc 800cc 1600 Fuel L/h 24 L 8L 16 L speed 300kph 600kph 300kph Lap.time 90secs 70secs 20s/lap kmpl 12.5 75 62.5 Cost 300,000$ 350,000$ -50k$ Co2e 186g/km 31g/km 155g/km hp/fuel.h 33.3 100 66 ton-kph 180 360 180 ton-kpl 7.5 45 37.5 Gallop 0-100kph 5s 3s 2s Venture Fund: 1.2 mn$, 2 yrs. 600 kmph Muthukal Andy Appan, M.E, 50 yrs. Expert, Chennai. India. ANDY TECHNOLOGY. Same Power, 2x Speed AUTOMOTIVE FORMULA 1 DESIGN Win by 12 Laps. 20s*60L/90s= 13.3 Laps by Low Rolling Friction at Front Wheels on Double Speed, 1/3 Fuel for same Ton-HP. 6x kmpl; 1/6 of normal Co2e g/km.