Food Technology Production of Butter
•
4 likes•384 views
Butter is a dairy product made from milk or cream. This document is about butter and is written by A. Indumathi, an Assistant Professor in the PG & Research Department of Biotechnology at Bon Secours College for Women in Thanjavur. The document likely provides details about the production and properties of butter.
Report
Share
Report
Share
Download to read offline
Recommended
Industrial Production of cheese
Cheese is made through a multi-step production process. Milk is standardized, pasteurized, cooled, and inoculated with starter bacteria. Rennet is added to coagulate the milk into a curd. The curd is cut, heated, drained, pressed, salted, and aged. The aging process can take months to years depending on the cheese variety. Finally, cheese is packaged for distribution.
Fermented food products
This document discusses several types of fermented Asian foods including soy sauce, miso, sufu, natto, and idli. It describes the key ingredients and fermentation processes for each food. Soy sauce is produced from fermented soybeans, wheat, and saltwater using molds and bacteria. Miso is made from fermented soybeans with rice or barley and varies in taste depending on ingredients and fermentation time. Sufu involves drying and air fermenting tofu cubes with molds. Natto is made by fermenting soybeans with Bacillus subtilis. Idli involves the bacterial fermentation of rice and black gram dhal batter.
Tempeh production
Tempeh is a fermented soybean product originating from Indonesia. It is made by fermenting cooked soybeans with Rhizopus moulds, resulting in a firm, compressed cake with a mild flavor. The traditional production process involves soaking, dehulling, cooking, and mixing soybeans with tempeh starter before wrapping and incubating to allow mould growth. Fermentation increases nutrients and breaks down compounds causing flatulence. Tempeh production is still predominantly small-scale in Indonesia and Malaysia, but it has spread to other countries and can now be produced industrially using stainless steel equipment and pure mould cultures.
Manufacturing process of whisky
All Whisky Lovers i think its time to even learn how the Whisky is manufactured. Hope you all Love it as Whisky...!!!
Fermented milk products
This document discusses various fermented milk products including cheese, yogurt, cultured buttermilk, acidophilus milk, and kefir. It provides details on the production processes and microorganisms involved in each product. Cheese is produced through fermentation of milk proteins and fats using bacteria and ripening. Yogurt is made by fermenting milk with Lactobacillus bulgaricus and Streptococcus thermophilus. Cultured buttermilk is the fluid remaining after sour cream or ripened cream is churned into butter. Acidophilus milk contains Lactobacillus acidophilus for potential health benefits. Kefir uses "kefir grains" containing various bacteria and yeasts to ferment milk
Fermented cereal products 2
This document discusses bread and fermented rice products. It provides definitions of bread as a staple food made from flour, water, and yeast that is baked. The bread making process involves mixing, kneading, fermentation, shaping, baking, and packaging. Fermentation is performed by yeast and lactic acid bacteria, including Saccharomyces cerevisiae and Leuconostoc mesenteroides. These microorganisms produce gases and acids that cause dough to rise and develop flavor. The document also discusses the production of puto, a Filipino rice cake, and bibingka, noting they involve a natural fermentation process similar to bread.
Enzymes used in Dairy Industry
This presentation gives you the overall information of how enzymes are used in dairy industry and detailed explanation on production of cheese. Refer to the references for more detailed information.
Tofu (1)
Tofu is a protein-rich food made by coagulating soy milk and pressing the curds into soft white blocks. It comes in various forms depending on the amount of water pressed out - silken/soft tofu contains the most moisture while extra firm tofu contains the least. Tofu can also be processed through methods like fermentation, drying, frying or freezing to increase shelf life or create different textures. Processed forms include pickled tofu, dried tofu, fried tofu and frozen thousand layer tofu. Tofu is versatile and can be prepared in both savory and sweet dishes.
Recommended
Industrial Production of cheese
Cheese is made through a multi-step production process. Milk is standardized, pasteurized, cooled, and inoculated with starter bacteria. Rennet is added to coagulate the milk into a curd. The curd is cut, heated, drained, pressed, salted, and aged. The aging process can take months to years depending on the cheese variety. Finally, cheese is packaged for distribution.
Fermented food products
This document discusses several types of fermented Asian foods including soy sauce, miso, sufu, natto, and idli. It describes the key ingredients and fermentation processes for each food. Soy sauce is produced from fermented soybeans, wheat, and saltwater using molds and bacteria. Miso is made from fermented soybeans with rice or barley and varies in taste depending on ingredients and fermentation time. Sufu involves drying and air fermenting tofu cubes with molds. Natto is made by fermenting soybeans with Bacillus subtilis. Idli involves the bacterial fermentation of rice and black gram dhal batter.
Tempeh production
Tempeh is a fermented soybean product originating from Indonesia. It is made by fermenting cooked soybeans with Rhizopus moulds, resulting in a firm, compressed cake with a mild flavor. The traditional production process involves soaking, dehulling, cooking, and mixing soybeans with tempeh starter before wrapping and incubating to allow mould growth. Fermentation increases nutrients and breaks down compounds causing flatulence. Tempeh production is still predominantly small-scale in Indonesia and Malaysia, but it has spread to other countries and can now be produced industrially using stainless steel equipment and pure mould cultures.
Manufacturing process of whisky
All Whisky Lovers i think its time to even learn how the Whisky is manufactured. Hope you all Love it as Whisky...!!!
Fermented milk products
This document discusses various fermented milk products including cheese, yogurt, cultured buttermilk, acidophilus milk, and kefir. It provides details on the production processes and microorganisms involved in each product. Cheese is produced through fermentation of milk proteins and fats using bacteria and ripening. Yogurt is made by fermenting milk with Lactobacillus bulgaricus and Streptococcus thermophilus. Cultured buttermilk is the fluid remaining after sour cream or ripened cream is churned into butter. Acidophilus milk contains Lactobacillus acidophilus for potential health benefits. Kefir uses "kefir grains" containing various bacteria and yeasts to ferment milk
Fermented cereal products 2
This document discusses bread and fermented rice products. It provides definitions of bread as a staple food made from flour, water, and yeast that is baked. The bread making process involves mixing, kneading, fermentation, shaping, baking, and packaging. Fermentation is performed by yeast and lactic acid bacteria, including Saccharomyces cerevisiae and Leuconostoc mesenteroides. These microorganisms produce gases and acids that cause dough to rise and develop flavor. The document also discusses the production of puto, a Filipino rice cake, and bibingka, noting they involve a natural fermentation process similar to bread.
Enzymes used in Dairy Industry
This presentation gives you the overall information of how enzymes are used in dairy industry and detailed explanation on production of cheese. Refer to the references for more detailed information.
Tofu (1)
Tofu is a protein-rich food made by coagulating soy milk and pressing the curds into soft white blocks. It comes in various forms depending on the amount of water pressed out - silken/soft tofu contains the most moisture while extra firm tofu contains the least. Tofu can also be processed through methods like fermentation, drying, frying or freezing to increase shelf life or create different textures. Processed forms include pickled tofu, dried tofu, fried tofu and frozen thousand layer tofu. Tofu is versatile and can be prepared in both savory and sweet dishes.
History of microorganisms in food
1) Microbiology is the study of microorganisms like bacteria, fungi, protozoa and algae that are essential to food chains and life.
2) Foods naturally contain microbes that depend on what organisms access the food and how they interact over time, originating from raw materials and introduced during processing.
3) Microorganisms can cause spoilage, foodborne illness, or beneficially transform foods through fermentation. The history of understanding microorganisms in food dates back thousands of years and key figures like Pasteur helped establish their role in spoilage and develop preservation methods like pasteurization.
Fermented milkproducts
This document provides information on fermented milk products including their production processes, nutritional compositions, and therapeutic values. It discusses various fermented products like yogurt, lassi, shrikhand, cultured buttermilk, and acidophilus milk. Yogurt is produced by fermenting milk with Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus bacteria. It is rich in vitamins and minerals and beneficial for immunity, heart health, and gastrointestinal conditions. Indian curd or dahi is made by souring milk using lactic acid bacteria and has therapeutic effects such as aiding digestion and strengthening bones.
Tempeh
This document provides information about tempeh, a fermented soy food product. It defines tempeh as cooked soybeans bound together by the mycelium of Rhizopus mold during a fermentation process. The document outlines the nutritional value of tempeh, noting that it is a complete protein containing all essential amino acids. It also describes the role of Rhizopus oligosporus mold in the fermentation of tempeh and binding the soybeans into a compact cake. The document provides details on the production process and preservation of tempeh.
Cheese power point
The document provides information on the basics of homemade mozzarella cheese making, including the history of cheese, necessary ingredients and supplies, different types of cheeses, and a recipe for 30 minute homemade mozzarella cheese. Details are given on the ingredients and step-by-step process for making fresh mozzarella cheese in only 30 minutes using common ingredients like milk, citric acid, rennet, and cheese salt. Additional resources for books and websites on the topic of homemade cheese making are also listed.
Microbiology of idly
This document discusses the microbiology of idly, a popular South Indian breakfast food. It begins by introducing idly and its variations. The key microorganisms involved in idly fermentation are lactic acid bacteria like Leuconostoc mesenteroidies and yeasts like Saccharomyces cerevisiae. These microbes lower the pH and increase volume during fermentation. Biochemical changes increase nutrients like proteins, amino acids, and vitamins. Finally, the document discusses methods to improve the shelf life of idly batter and cooked idly.
Industrial Preparation of Yogurt
Food Industry of Biotechnology involves preparation of different food items that are used as common part of diet throughout the world.The presentation describes the Industrial preparation of Yogurt.
Traditional fungal food miso
Miso is a traditional Japanese fermented soybean paste. The document outlines the production process of rice miso, which involves steaming rice and barley, inoculating them with koji mold to make koji, mixing the koji with cooked soybeans, and placing the mixture into fermentation tanks. The mixture is then fermented to produce miso, which is later filled and packaged using miso filling machines.
Microbial flavors production
This document discusses microbial flavors produced by microorganisms through metabolic processes. It describes several types of flavor compounds produced, including lactones, alcohols, aldehydes, and methyl ketones. Methods for microbial flavor production are outlined, such as de novo synthesis, biotransformation, and enzymatic methods using microbes like yeast, bacteria, and fungi. Examples of specific flavor compounds produced through these methods and the microbes involved are provided. Advantages of microbial flavor production are noted. The current status and market for microbial flavors is briefly summarized.
Butter: Manufacturing Process and Standard specifications
Butter is defined as a fatty product derived exclusively from milk. It is principally in the form of a water-in-oil emulsion and has a minimum milk fat content of 80%. The butter making process involves pasteurizing, ripening, churning, working, and packaging the cream. Additives like salt and coloring are often added to butter to improve qualities like flavor and shelf life. Butter is classified based on factors like acidity of cream, salt content, and intended end use.
Dahi and yoghurt
Dahi is a fermented milk product made by lactic acid fermentation of cow or buffalo milk. It is similar to yogurt but has less acidity. Dahi is consumed widely in India and neighboring countries. It is made by inoculating boiled milk with previous day's leftover dahi (starter culture) which contains lactic acid bacteria. Dahi has a firm, smooth consistency and is commonly consumed sweetened, salted, or with rice and flatbread. It is considered nutritious and good for digestion in traditional Indian medicine.
Bread Processing
INTRODUCTION:
BREAD is a dietary product obtained from the fermentation and the subsequent baking of a dough mainly made of cereal flour and water, made in many different ways and sometimes enriched with typical regional ingredients.
Ingredients of bread:
Flour is the bulking ingredient of bread, it forms the structure of the product,contains gluten which helps to form an elastic stretchy dough.
Yeast is a raising agent. Yeast produces gases to make the bread rise.
Salt is required to bring out flavour in the bread, it is used in small quantities.Too much of this ingredient will stop the yeast from growing.
Yeast needs energy to grow. Sugar provides the food for the yeast; it is needed to help the yeast grow.
Water is used to bind the flour together and helps to form the structure of the bread.
Fats or oils improve the texture of the bread, preventing it from going stale quickly.
Starter culture:
Baker's yeast is the common name for the strains of yeast commonly used as a leavening agent in baking bread and bakery products, where it converts the fermentable sugars present in the dough into carbon dioxide and ethanol. Baker's yeast is of the species Saccharomyces cerevisiae, which is the same species (but a different strain) commonly used in alcoholic fermentation which is called brewer's yeast.
Bread Making Process
Mixing has two functions: to evenly distribute the various ingredients and allow the development of a protein (gluten) network to give the best bread possible.
Once the bread is mixed it is then left to rise (ferment).
Any large gas holes that may have formed during rising are released by kneading.
Moulding the dough into desired loaf shape.
During the final rising the loaf fills with more bubbles of gas, and once this has proceeded far enough they are transferred to the oven for baking.
The loaf is then placed in a preheated oven to bake. Such a high heat will kill the yeast, thus stopping its process of rising and growth.
The whole loaf is cooled to about 35°C before slicing and wrapping can occur without damaging the loaf.
Types of Bread
1. White Bread
2. Brown Bread
3. Wholemeal bread
4. Rye bread
Apart from above there are several types like Crisp bread, Flatbread is often simple, made with flour, water, and salt.
Microbial spoilage
Molds are the primary spoilage organisms in baked goods, with Aspergillus, Penicillium, and Eurotium being the most commonly isolated genera.
Quality control
As a foodstuff, bread is subject to stringent government food processing regulations, including, but not limited to the percent of additives allowed, sterilization of plant equipment, and cleanliness of plant workers. In addition to adhering to these regulations, processors control the quality of their products to meet consumer expectations by installing checkpoints are various stages of the processing.
Oriental foods
Oriental fermented foods are traditionally made foods from Asia that use fermentation to preserve and enhance nutrients. Key fermented foods discussed include natto from Japan made from fermented soybeans, minchin from wheat fermented for weeks, piden which are preserved eggs from China, and poi from Hawaii made by mashing and pounding taro. Fermentation involves microbes like bacteria and molds transforming the ingredients through processes like lactic acid production. These foods are significant sources of nutrition and have distinct flavors, textures, and importance in various Asian cuisines.
HIGH FRUCTOSE CORN SYRUP
Describes about the production of high fructose corn syrup.It's uses,production process and health risks
Concentrated milk products
This document discusses various concentrated milk products and their manufacturing processes. It describes evaporated milk, sweetened condensed milk, cheese, khoya, and dry milk powder. For evaporated milk and condensed milk, it explains the heating, vacuum evaporation or crystallization steps used to remove water and increase the density. It provides the composition and major brands for several products. The manufacturing of cheese involves adding bacteria to curd the milk, pressing the curds, and aging the cheese. Khoya is made by heating milk to evaporate the moisture. Powdered milk production involves concentrating milk then spray drying the particles.
Fermented milk products
This document discusses various fermented milk products including yogurt, kefir, cheese, and others. It explains that fermenting milk involves adding bacteria or yeast that consume lactose and produce lactic acid, lowering the milk's pH. This fermentation process allows the creation of products like yogurt, kefir and cheese. The document also outlines some traditional fermented milks from different cultures around the world and describes their production processes and characteristics. Finally, it discusses the functional properties and nutritional benefits of fermented milk products.
Ankur ppt
This document presents information about cheese from a presentation given by Ankur Gupta. It defines cheese and describes its classification based on moisture content, including soft, semi-hard, hard, and very hard cheeses. The general manufacturing process for cheese is outlined involving steps like coagulation, curd preparation, pressing, salting, and ripening. Specific methods for making cottage cheese and cheddar cheese are also summarized. Common defects in cheddar cheese and their causes are listed. Popular cheese brands in India are noted along with Amul being a major brand. The conclusion restates that cheese is obtained from milk through coagulation and draining and that acceptability remains a concern for some due to the use of rennet.
Kefir – an alternative fermented mlik
This document discusses kefir, a fermented dairy beverage produced by inoculating milk with kefir grains. Kefir grains contain various lactic acid bacteria and yeasts that ferment the milk sugars to produce kefir's characteristic sour taste, slightly alcoholic and yeasty flavor. Kefir provides probiotics and nutrients like protein, calcium and B vitamins. It is prepared by mixing pasteurized milk with kefir grains, incubating to ferment, then separating the grains to produce a drinkable consistency high in beneficial microbes and nutrients. Kefir grains can be preserved through drying or refrigeration and reused to make repeated batches of the probiotic fermented milk beverage.
Bacteriocin From lactic acid bacteria
Bacteriocin are produced from lactic acid bacteria .
various lactic acid bacteria produces different kinds of bacteriocin .
Bacteriocin can be used as food preservative
Cheese production
This document provides information on the production of cheese. It begins with the etymology of the word "cheese" and then lists some of the oldest cheeses. The rest of the document details the cheese making process, including introducing starter cultures and rennet to milk to cause coagulation. It describes techniques like salting, pressing, and aging the curd. Various types of cheeses are mentioned. Additives that can be used in cheese making like calcium chloride are also outlined.
Fermented foods and beverages, food ingredients and food additives
This document discusses fermented foods and beverages, food ingredients, and food additives. It begins by introducing fermented foods and some common examples like cheese, yogurt, bread, and beer. It then explains the microorganisms and metabolic processes involved in fermentation. Specific fermentation processes for cheese and beer are described in more detail. The document also defines food ingredients and discusses various types of food additives used to preserve foods and enhance qualities like taste, appearance, and shelf life. In conclusion, it summarizes that fermentation converts carbohydrates into other compounds using microorganisms, while food additives are added to foods to maintain quality attributes.
Complement pathway (mnemonic)
The document summarizes the complement system, its components, activation pathways, and functions. The complement system is a group of plasma proteins that enhance immunity. It consists of 11 main proteins that catalyze enzymatic reactions in three pathways: the classical pathway triggered by antibody-antigen complexes, the alternative pathway activated by bacterial surfaces, and the mannose-binding lectin pathway. The complement system opsonizes pathogens, releases anaphylatoxins, and forms the membrane attack complex to lyse bacteria cells. It also enhances antibody production and inflammation responses.
MHC genes
The major histocompatibility complex (MHC) is a gene-dense region located on chromosome 6 in humans that contains genes critical to the immune system. The MHC has three regions - class I, class II, and class III. Class I genes produce molecules expressed on all cells that present endogenous antigens to CD8+ T cells, playing a role in graft rejection. Class II genes produce molecules only expressed on immune cells that present exogenous antigens to CD4+ T cells and are involved in graft-versus-host disease. Class III genes encode components of the complement system and other immune functions. The MHC loci are highly polymorphic and alleles determine antigen specificity.
More Related Content
What's hot
History of microorganisms in food
1) Microbiology is the study of microorganisms like bacteria, fungi, protozoa and algae that are essential to food chains and life.
2) Foods naturally contain microbes that depend on what organisms access the food and how they interact over time, originating from raw materials and introduced during processing.
3) Microorganisms can cause spoilage, foodborne illness, or beneficially transform foods through fermentation. The history of understanding microorganisms in food dates back thousands of years and key figures like Pasteur helped establish their role in spoilage and develop preservation methods like pasteurization.
Fermented milkproducts
This document provides information on fermented milk products including their production processes, nutritional compositions, and therapeutic values. It discusses various fermented products like yogurt, lassi, shrikhand, cultured buttermilk, and acidophilus milk. Yogurt is produced by fermenting milk with Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus bacteria. It is rich in vitamins and minerals and beneficial for immunity, heart health, and gastrointestinal conditions. Indian curd or dahi is made by souring milk using lactic acid bacteria and has therapeutic effects such as aiding digestion and strengthening bones.
Tempeh
This document provides information about tempeh, a fermented soy food product. It defines tempeh as cooked soybeans bound together by the mycelium of Rhizopus mold during a fermentation process. The document outlines the nutritional value of tempeh, noting that it is a complete protein containing all essential amino acids. It also describes the role of Rhizopus oligosporus mold in the fermentation of tempeh and binding the soybeans into a compact cake. The document provides details on the production process and preservation of tempeh.
Cheese power point
The document provides information on the basics of homemade mozzarella cheese making, including the history of cheese, necessary ingredients and supplies, different types of cheeses, and a recipe for 30 minute homemade mozzarella cheese. Details are given on the ingredients and step-by-step process for making fresh mozzarella cheese in only 30 minutes using common ingredients like milk, citric acid, rennet, and cheese salt. Additional resources for books and websites on the topic of homemade cheese making are also listed.
Microbiology of idly
This document discusses the microbiology of idly, a popular South Indian breakfast food. It begins by introducing idly and its variations. The key microorganisms involved in idly fermentation are lactic acid bacteria like Leuconostoc mesenteroidies and yeasts like Saccharomyces cerevisiae. These microbes lower the pH and increase volume during fermentation. Biochemical changes increase nutrients like proteins, amino acids, and vitamins. Finally, the document discusses methods to improve the shelf life of idly batter and cooked idly.
Industrial Preparation of Yogurt
Food Industry of Biotechnology involves preparation of different food items that are used as common part of diet throughout the world.The presentation describes the Industrial preparation of Yogurt.
Traditional fungal food miso
Miso is a traditional Japanese fermented soybean paste. The document outlines the production process of rice miso, which involves steaming rice and barley, inoculating them with koji mold to make koji, mixing the koji with cooked soybeans, and placing the mixture into fermentation tanks. The mixture is then fermented to produce miso, which is later filled and packaged using miso filling machines.
Microbial flavors production
This document discusses microbial flavors produced by microorganisms through metabolic processes. It describes several types of flavor compounds produced, including lactones, alcohols, aldehydes, and methyl ketones. Methods for microbial flavor production are outlined, such as de novo synthesis, biotransformation, and enzymatic methods using microbes like yeast, bacteria, and fungi. Examples of specific flavor compounds produced through these methods and the microbes involved are provided. Advantages of microbial flavor production are noted. The current status and market for microbial flavors is briefly summarized.
Butter: Manufacturing Process and Standard specifications
Butter is defined as a fatty product derived exclusively from milk. It is principally in the form of a water-in-oil emulsion and has a minimum milk fat content of 80%. The butter making process involves pasteurizing, ripening, churning, working, and packaging the cream. Additives like salt and coloring are often added to butter to improve qualities like flavor and shelf life. Butter is classified based on factors like acidity of cream, salt content, and intended end use.
Dahi and yoghurt
Dahi is a fermented milk product made by lactic acid fermentation of cow or buffalo milk. It is similar to yogurt but has less acidity. Dahi is consumed widely in India and neighboring countries. It is made by inoculating boiled milk with previous day's leftover dahi (starter culture) which contains lactic acid bacteria. Dahi has a firm, smooth consistency and is commonly consumed sweetened, salted, or with rice and flatbread. It is considered nutritious and good for digestion in traditional Indian medicine.
Bread Processing
INTRODUCTION:
BREAD is a dietary product obtained from the fermentation and the subsequent baking of a dough mainly made of cereal flour and water, made in many different ways and sometimes enriched with typical regional ingredients.
Ingredients of bread:
Flour is the bulking ingredient of bread, it forms the structure of the product,contains gluten which helps to form an elastic stretchy dough.
Yeast is a raising agent. Yeast produces gases to make the bread rise.
Salt is required to bring out flavour in the bread, it is used in small quantities.Too much of this ingredient will stop the yeast from growing.
Yeast needs energy to grow. Sugar provides the food for the yeast; it is needed to help the yeast grow.
Water is used to bind the flour together and helps to form the structure of the bread.
Fats or oils improve the texture of the bread, preventing it from going stale quickly.
Starter culture:
Baker's yeast is the common name for the strains of yeast commonly used as a leavening agent in baking bread and bakery products, where it converts the fermentable sugars present in the dough into carbon dioxide and ethanol. Baker's yeast is of the species Saccharomyces cerevisiae, which is the same species (but a different strain) commonly used in alcoholic fermentation which is called brewer's yeast.
Bread Making Process
Mixing has two functions: to evenly distribute the various ingredients and allow the development of a protein (gluten) network to give the best bread possible.
Once the bread is mixed it is then left to rise (ferment).
Any large gas holes that may have formed during rising are released by kneading.
Moulding the dough into desired loaf shape.
During the final rising the loaf fills with more bubbles of gas, and once this has proceeded far enough they are transferred to the oven for baking.
The loaf is then placed in a preheated oven to bake. Such a high heat will kill the yeast, thus stopping its process of rising and growth.
The whole loaf is cooled to about 35°C before slicing and wrapping can occur without damaging the loaf.
Types of Bread
1. White Bread
2. Brown Bread
3. Wholemeal bread
4. Rye bread
Apart from above there are several types like Crisp bread, Flatbread is often simple, made with flour, water, and salt.
Microbial spoilage
Molds are the primary spoilage organisms in baked goods, with Aspergillus, Penicillium, and Eurotium being the most commonly isolated genera.
Quality control
As a foodstuff, bread is subject to stringent government food processing regulations, including, but not limited to the percent of additives allowed, sterilization of plant equipment, and cleanliness of plant workers. In addition to adhering to these regulations, processors control the quality of their products to meet consumer expectations by installing checkpoints are various stages of the processing.
Oriental foods
Oriental fermented foods are traditionally made foods from Asia that use fermentation to preserve and enhance nutrients. Key fermented foods discussed include natto from Japan made from fermented soybeans, minchin from wheat fermented for weeks, piden which are preserved eggs from China, and poi from Hawaii made by mashing and pounding taro. Fermentation involves microbes like bacteria and molds transforming the ingredients through processes like lactic acid production. These foods are significant sources of nutrition and have distinct flavors, textures, and importance in various Asian cuisines.
HIGH FRUCTOSE CORN SYRUP
Describes about the production of high fructose corn syrup.It's uses,production process and health risks
Concentrated milk products
This document discusses various concentrated milk products and their manufacturing processes. It describes evaporated milk, sweetened condensed milk, cheese, khoya, and dry milk powder. For evaporated milk and condensed milk, it explains the heating, vacuum evaporation or crystallization steps used to remove water and increase the density. It provides the composition and major brands for several products. The manufacturing of cheese involves adding bacteria to curd the milk, pressing the curds, and aging the cheese. Khoya is made by heating milk to evaporate the moisture. Powdered milk production involves concentrating milk then spray drying the particles.
Fermented milk products
This document discusses various fermented milk products including yogurt, kefir, cheese, and others. It explains that fermenting milk involves adding bacteria or yeast that consume lactose and produce lactic acid, lowering the milk's pH. This fermentation process allows the creation of products like yogurt, kefir and cheese. The document also outlines some traditional fermented milks from different cultures around the world and describes their production processes and characteristics. Finally, it discusses the functional properties and nutritional benefits of fermented milk products.
Ankur ppt
This document presents information about cheese from a presentation given by Ankur Gupta. It defines cheese and describes its classification based on moisture content, including soft, semi-hard, hard, and very hard cheeses. The general manufacturing process for cheese is outlined involving steps like coagulation, curd preparation, pressing, salting, and ripening. Specific methods for making cottage cheese and cheddar cheese are also summarized. Common defects in cheddar cheese and their causes are listed. Popular cheese brands in India are noted along with Amul being a major brand. The conclusion restates that cheese is obtained from milk through coagulation and draining and that acceptability remains a concern for some due to the use of rennet.
Kefir – an alternative fermented mlik
This document discusses kefir, a fermented dairy beverage produced by inoculating milk with kefir grains. Kefir grains contain various lactic acid bacteria and yeasts that ferment the milk sugars to produce kefir's characteristic sour taste, slightly alcoholic and yeasty flavor. Kefir provides probiotics and nutrients like protein, calcium and B vitamins. It is prepared by mixing pasteurized milk with kefir grains, incubating to ferment, then separating the grains to produce a drinkable consistency high in beneficial microbes and nutrients. Kefir grains can be preserved through drying or refrigeration and reused to make repeated batches of the probiotic fermented milk beverage.
Bacteriocin From lactic acid bacteria
Bacteriocin are produced from lactic acid bacteria .
various lactic acid bacteria produces different kinds of bacteriocin .
Bacteriocin can be used as food preservative
Cheese production
This document provides information on the production of cheese. It begins with the etymology of the word "cheese" and then lists some of the oldest cheeses. The rest of the document details the cheese making process, including introducing starter cultures and rennet to milk to cause coagulation. It describes techniques like salting, pressing, and aging the curd. Various types of cheeses are mentioned. Additives that can be used in cheese making like calcium chloride are also outlined.
Fermented foods and beverages, food ingredients and food additives
This document discusses fermented foods and beverages, food ingredients, and food additives. It begins by introducing fermented foods and some common examples like cheese, yogurt, bread, and beer. It then explains the microorganisms and metabolic processes involved in fermentation. Specific fermentation processes for cheese and beer are described in more detail. The document also defines food ingredients and discusses various types of food additives used to preserve foods and enhance qualities like taste, appearance, and shelf life. In conclusion, it summarizes that fermentation converts carbohydrates into other compounds using microorganisms, while food additives are added to foods to maintain quality attributes.
What's hot (20)
Butter: Manufacturing Process and Standard specifications
Butter: Manufacturing Process and Standard specifications
Fermented foods and beverages, food ingredients and food additives
Fermented foods and beverages, food ingredients and food additives
More from indumathi balaji
Complement pathway (mnemonic)
The document summarizes the complement system, its components, activation pathways, and functions. The complement system is a group of plasma proteins that enhance immunity. It consists of 11 main proteins that catalyze enzymatic reactions in three pathways: the classical pathway triggered by antibody-antigen complexes, the alternative pathway activated by bacterial surfaces, and the mannose-binding lectin pathway. The complement system opsonizes pathogens, releases anaphylatoxins, and forms the membrane attack complex to lyse bacteria cells. It also enhances antibody production and inflammation responses.
MHC genes
The major histocompatibility complex (MHC) is a gene-dense region located on chromosome 6 in humans that contains genes critical to the immune system. The MHC has three regions - class I, class II, and class III. Class I genes produce molecules expressed on all cells that present endogenous antigens to CD8+ T cells, playing a role in graft rejection. Class II genes produce molecules only expressed on immune cells that present exogenous antigens to CD4+ T cells and are involved in graft-versus-host disease. Class III genes encode components of the complement system and other immune functions. The MHC loci are highly polymorphic and alleles determine antigen specificity.
Fish food processing indu
This document summarizes various fish food processing techniques. It discusses products like whole fish, fillets, fish sticks and cakes. It covers grading, chilling, freezing and other preservation methods like smoking, pickling, salting and marination. It also describes fish oil extraction from liver and body tissues, used for omega-3 fatty acids. Fish meal is made from whole fish or filleting wastes to use in aquaculture feeds for its high protein content. The document provides details on the composition and uses of these various fish-derived foods and ingredients.
Confectioneries - Food Technology
The document discusses different types of confectionery products. It begins by describing the various ingredients commonly used in making confections like sugars, dairy products, fats, hydrocolloids, emulsifiers, colors, flavors, and antioxidants. It then explains the different categories of confections - flour, sugar, chocolate, milk and other confections. Specific examples like toffee manufacturing process and popular Indian and international confections are also mentioned. The document provides detailed information on ingredients and processes involved in the confectionery industry.
Food borne Disease- Infection and Intoxication
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Food borne disease
This document provides an overview of foodborne diseases. It discusses that foodborne illness is caused by consuming contaminated food containing bacteria, viruses, parasites or toxins. Some common foodborne diseases mentioned are caused by Salmonella, E. coli, C. botulinum, and norovirus. The document also looks at types of food contamination (biological, chemical, physical), symptoms of food poisoning, and methods of prevention including proper food handling and hygiene practices.
Food processing techniques- Extraction and Filtration
This document discusses extraction and filtration techniques used in food processing. It describes various extraction methods like maceration, percolation, and supercritical fluid extraction. These techniques are used to extract active constituents from foods. It also explains filtration principles and methods like bed filtration and microfiltration. Filtration separates solids from liquids using a porous medium. Various applications of extraction and filtration in food processing, pharmaceuticals, and environmental areas are provided. In conclusion, the document outlines the importance of extraction and filtration in the physical conversion of foods.
Genetic engineering for crop improvement
This document discusses the use of Agrobacterium tumefaciens for genetic transformation of plants through its Ti plasmid, which contains tumor-inducing (Ti) DNA that can integrate genes for traits like herbicide and insect resistance into plant genomes. The process involves A. tumefaciens attaching to wounded plant cells and inducing virulence genes that cause the Ti plasmid and its T-DNA to integrate into the plant's nuclear DNA, resulting in transformed cells that can be used to generate transgenic crops with desirable traits.
Plant tissue culture
This document discusses plant tissue culture, in vitro pollination, and in vitro fertilization. It covers the history of plant tissue culture, types of tissue culture including meristem culture and callus culture, selection of explants, and the basic steps of tissue culture including inoculation and induction of callus. It also describes different types of in vitro pollination and techniques for in vitro fertilization in maize plants, including isolation of sperm and egg cells. Applications of these techniques include micropropagation of ornamental plants and production of artificial seeds.
Identification of organic foods
Organic food must be free of artificial additives and processed with fewer synthetic methods and materials. To identify organic foods, look for products with the organic certification label and read ingredients carefully, as labels stating 95% organic mean 5% of ingredients are non-organic. Organic foods can be purchased from registered markets and sellers with labels, and are often duller in color and shape but have more intense flavors and may contain spots or insects since they are not treated with pesticides.
Insect resistance
This document discusses insect resistance in crops. It introduces the direct and indirect damage insects can cause to crops. It then covers several topics related to developing insect resistance in crops, including the orders of insects that most damage crops, using genes from Bacillus thuringiensis to generate transgenic insect-resistant plants, and the mechanisms of non-preference, antibiosis, and tolerance that confer resistance. The document also addresses the history of insect resistance, applications of insect-resistant crops, and their benefits for reducing insecticide use and integrating with other pest management methods. It concludes by discussing the importance of insect resistance for protecting agriculture, especially in potential future conflicts, and the need for education on optimal use of insect-resistant crops.
Genetically modified foods
This document discusses genetically modified foods (GM foods). It begins with an introduction to GM foods and their history. It then describes various techniques used to create GM foods as well as significant examples like Flavr Savr tomatoes in 1994 and Golden Rice in 2002. The document outlines benefits of GM foods such as increased yield and drought/pest resistance, but also risks. It concludes that while GM foods have potential to address hunger and nutrition problems, their development must be monitored.
Ecological impact of genetic crops
This document discusses genetically modified (GM) foods, their potential ecological impacts, and future prospects. It notes that GM foods are seen as a solution to increasing global food needs but may pose environmental and health risks. Benefits include crops with delayed ripening and pest/disease resistance, while risks include genetic contamination of natural species, ecosystem impacts, and possible human health effects. Future prospects include using GM techniques to increase nutrition and disease tolerance while avoiding risks, and for GM foods to potentially help address world hunger if risks can be managed.
Genetic engineering for crop improvement
Agrobacterium tumefaciens is a bacterium that can transfer tumor-inducing (Ti) plasmid DNA containing T-DNA into plant cells, causing crown gall disease. The Ti-plasmid contains genes responsible for tumor formation and opine synthesis. During genetic transformation of plants, the T-DNA region of the Ti-plasmid, bounded by left and right borders and containing genes for auxin, cytokinin, and opine synthesis, integrates into the plant genome. Genetic engineers now use Agrobacterium-mediated transformation or physical methods like biolistics to insert genes into plants and create transgenic crops with useful traits such as herbicide or insect resistance.
More from indumathi balaji (14)
Food processing techniques- Extraction and Filtration
Food processing techniques- Extraction and Filtration
Recently uploaded
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Particle-In-Cell (PIC) algorithm,
Plasma expansion in the dipole magnetic field.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
如何办理(uvic毕业证书)维多利亚大学毕业证本科学位证书原版一模一样
原版纸张【微信：741003700 】【(uvic毕业证书)维多利亚大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero WaterTexas Alliance of Groundwater Districts
Presented at June 6-7 Texas Alliance of Groundwater Districts Business MeetingThe binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
原版制作(carleton毕业证书)卡尔顿大学毕业证硕士文凭原版一模一样
原版纸张【微信：741003700 】【(carleton毕业证书)卡尔顿大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Recently uploaded (20)
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
Food Technology Production of Butter
- 1. UNIT V DAIRY PRODUCTS BUTTER A. INDUMATHI, Asst. Prof PG & Research Department of Biotechnology Bon Secours College for Women, Thanjavur