DSD-INT 2020 Real Time Hydrologic, Hydraulic and Water Quality Forecasting in...Deltares
Presentation by Tony McAlister, WaterTech, at the Delft3D User Days - Australian Time zone: Inland to Estuary, during Delft Software Days - Edition 2020. Tuesday, 10 November 2020.
STORMTOOLS* -Simplified Flood Inundation Maps for RI with Sea Level Rise (SLR)riseagrant
Malcolm L. Spaulding1
Chris Damon2
1Professor Emeritus, Ocean Engineering
2Environmental Data Center
University of RI
December 9, 2014
*http://www.beachsamp.org/research/stormtools/
Narragansett, RI
DSD-INT 2018 Urban flooding and the Delft3D FM 1D2D capabilities - Washington...Deltares
Presentation by Didrik Meijer (Deltares) at the Delft3D - User Days (Day 1: Hydrology and hydrodynamics), during Delft Software Days - Edition 2018. Monday, 12 November 2018, Delft.
DSD-INT 2020 Real Time Hydrologic, Hydraulic and Water Quality Forecasting in...Deltares
Presentation by Tony McAlister, WaterTech, at the Delft3D User Days - Australian Time zone: Inland to Estuary, during Delft Software Days - Edition 2020. Tuesday, 10 November 2020.
STORMTOOLS* -Simplified Flood Inundation Maps for RI with Sea Level Rise (SLR)riseagrant
Malcolm L. Spaulding1
Chris Damon2
1Professor Emeritus, Ocean Engineering
2Environmental Data Center
University of RI
December 9, 2014
*http://www.beachsamp.org/research/stormtools/
Narragansett, RI
DSD-INT 2018 Urban flooding and the Delft3D FM 1D2D capabilities - Washington...Deltares
Presentation by Didrik Meijer (Deltares) at the Delft3D - User Days (Day 1: Hydrology and hydrodynamics), during Delft Software Days - Edition 2018. Monday, 12 November 2018, Delft.
Flood Mapping via HEC-RAS Model and ArcGISLengthong KIM
This research was taken place along the lower Mekong river reach part in Cambodia. The purpose of the study is to evaluate the HEC-RAS performance whether it eligible for Cambodia flood studies or not.
DSD-INT 2018 Delft3D FM - validation of hydrodynamics (2D,3D) - De GoedeDeltares
Presentation by Erik de Goede, Deltares, The Netherlands, at the Delft3D - User Days (Day 2: Hydrodynamics), during Delft Software Days - Edition 2018. Tuesday, 13 November 2018, Delft.
DSD-INT 2018 Experiences from modelling a branched lowland river in NE German...Deltares
Presentation by Rita Ley, Federal Institute of Hydrology, Germany, at the Delft3D - User Days (Day 1: Hydrology and hydrodynamics), during Delft Software Days - Edition 2018. Monday, 12 November 2018, Delft.
This presentation shows the main software used for numerically simulate the flood movement. first, it presents the HEC-RAS, then it discusses the Surface-water Modeling System (SMS), its interface, main components, DATA REQUIREMENTS and main steps to build a model using SMS.
February 2022 TAGD Business Meeting
Texas Water Development Board Updates
Natalie Ballew, Groundwater Technical Assistance Manager Heather Dodson, Groundwater Data Team Lead
DSD-INT 2017 Connecting ecology and water allocation - ChrzanowskiDeltares
Presentation by Clara Chrzanowski (Deltares) at the River Basin Planning and Modelling symposium, during Delft Software Days - Edition 2017. Wednesday, 25 October 2017, Delft.
DSD-INT 2020 Lake Turnover Assessments using Delft3D and SOBEK - van MegchelenDeltares
Presentation by Cara van Megchelen & Rob Swan, Cardno, at the Delft3D User Days - Australian Time zone: Inland to Estuary, during Delft Software Days - Edition 2020. Tuesday, 10 November 2020.
DSD-INT 2021 Webinar 3D water quality modelling using Delft3D FM Suite - VilminDeltares
Presentation by Lauriane Vilmin (Deltares), at the Webinar 3D water quality modelling using Delft3D FM Suite, during Delft Software Days - Edition 2021. Thursday, 9 December 2021.
DSD-INT 2017 Delft3D FM hydrodynamic and morphological modelling, Waal River,...Deltares
Presentation by Roy van Weerdenburg, Royal HaskoningDHV, Netherlands, at the Delft3D - User Days (Day 1: Hydrodynamics), during Delft Software Days - Edition 2017. Monday, 30 October 2017, Delft.
Flood Mapping via HEC-RAS Model and ArcGISLengthong KIM
This research was taken place along the lower Mekong river reach part in Cambodia. The purpose of the study is to evaluate the HEC-RAS performance whether it eligible for Cambodia flood studies or not.
DSD-INT 2018 Delft3D FM - validation of hydrodynamics (2D,3D) - De GoedeDeltares
Presentation by Erik de Goede, Deltares, The Netherlands, at the Delft3D - User Days (Day 2: Hydrodynamics), during Delft Software Days - Edition 2018. Tuesday, 13 November 2018, Delft.
DSD-INT 2018 Experiences from modelling a branched lowland river in NE German...Deltares
Presentation by Rita Ley, Federal Institute of Hydrology, Germany, at the Delft3D - User Days (Day 1: Hydrology and hydrodynamics), during Delft Software Days - Edition 2018. Monday, 12 November 2018, Delft.
This presentation shows the main software used for numerically simulate the flood movement. first, it presents the HEC-RAS, then it discusses the Surface-water Modeling System (SMS), its interface, main components, DATA REQUIREMENTS and main steps to build a model using SMS.
February 2022 TAGD Business Meeting
Texas Water Development Board Updates
Natalie Ballew, Groundwater Technical Assistance Manager Heather Dodson, Groundwater Data Team Lead
DSD-INT 2017 Connecting ecology and water allocation - ChrzanowskiDeltares
Presentation by Clara Chrzanowski (Deltares) at the River Basin Planning and Modelling symposium, during Delft Software Days - Edition 2017. Wednesday, 25 October 2017, Delft.
DSD-INT 2020 Lake Turnover Assessments using Delft3D and SOBEK - van MegchelenDeltares
Presentation by Cara van Megchelen & Rob Swan, Cardno, at the Delft3D User Days - Australian Time zone: Inland to Estuary, during Delft Software Days - Edition 2020. Tuesday, 10 November 2020.
DSD-INT 2021 Webinar 3D water quality modelling using Delft3D FM Suite - VilminDeltares
Presentation by Lauriane Vilmin (Deltares), at the Webinar 3D water quality modelling using Delft3D FM Suite, during Delft Software Days - Edition 2021. Thursday, 9 December 2021.
DSD-INT 2017 Delft3D FM hydrodynamic and morphological modelling, Waal River,...Deltares
Presentation by Roy van Weerdenburg, Royal HaskoningDHV, Netherlands, at the Delft3D - User Days (Day 1: Hydrodynamics), during Delft Software Days - Edition 2017. Monday, 30 October 2017, Delft.
Construction stage analysis of rcc frames project reportSayyad Wajed Ali
While analyzing a multistorey building frame, conventionally all the probable loads are applied after modeling the entire building frame. But in practice the frame is constructed in various stages. Accordingly, the stability of frame varies at every construction stage. Even during construction freshly placed concrete floor is supported by previously cast floor by formwork. Thus, the loads assumed in conventional analysis will vary in transient situation. Obviously, results obtained by the traditional analysis will be unsuitable. Therefore, the frame should be analyzed at every construction stage taking into account variation in loads. The phenomenon known as Construction Stage Analysis considers these uncertainties precisely. This paper analyzes several numbers of multistorey reinforced concrete building frames of different bay width and length, storey height and number of stories using STAADpro, followed by the construction stage analysis of each model. Also all full frame models are analyzed for earthquake forces in Zone - II (IS 1893 : 2002). Finally, a comparative study of Axial forces, Bending moments, Shear forces and Twisting moments was done at every storey for full frame model (without earthquake forces) and construction stage model (without earthquake forces).
This presentation was given as part of the EPA-funded Catchment Science and Management Course focusing on Integrated Catchment Management, held in June 2015. This course was delivered by RPS Consultants. If you have any queries or comments, or wish to use the material in this presentation, please contact catchments@epa.ie
It is increasingly being recognised internationally that integrated catchment management (ICM) is a useful organising framework for tackling the ongoing challenge of balancing sustainable use and development of our natural resource, against achieving environmental goals. The basic principles of ICM (Williams, 2012) are to:
• Take a holistic and integrated approach to the management of land, biodiversity, water and community resources at the water catchment scale;
• Involve communities in planning and managing their landscapes; and
• Find a balance between resource use and resource conservation
ICM is now well established in Australia, New Zealand, and the United States. In Europe the ICM approach has been proposed as being required to achieve effective water and catchment management, and is the approach being promoted by DEFRA for the UK, where it is called the “Catchment Based Approach” (CaBA). The principles and methodologies behind ICM sit well within the context of the Water Framework Directive with its aims and objectives for good water quality, sustainable development and public participation in water resource management. In Ireland it is proposed that the ICM approach will underlie the work and philosophy in developing and implementing future River Basin Management Plans.
This presentation was given at the EPA’s National Water Event 2019, which took place on 29 and 30 May 2019 in Galway. This presentation by Michael Goss from Irish Water is on addressing the challenges related to wastewater networks.
Review of urban flood risk mapping methods to guide risk reduction strategies. Tiered vulnerability assessment for urban storm (overland pluvial and sewer), sanitary / wastewater and riverine systems is illustrated from "Flood Plain to Floor Drain", consistent with the author's design standards guideline for best practices and projects in existing communities. Example risk mapping / tiered vulnerability evaluations in Markham, Ontario and Stratford, Ontario are shown emphasizing where simple and intermediate risk assessment can guide no-regret, practically deployed policies and programs to reduce urban flood risk, and there advanced risk assessment can guide minor and major capital projects as part of more comprehensive studies in high risk areas that warrant infrastructure investments to lower flood damages in specific local systems. Presentation was made as part of the Ontario Urban Flooding Collaborative organized by Green Communities Canada.
Environmental Management Modeling Activities at Los Alamos National Laborator...Velimir (monty) Vesselinov
esselinov, V.V., et al., Environmental Management Modeling Activities at Los Alamos National Laboratory (LANL), Department of Energy Technical Exchange Meeting, Performance Assessment Community of Practice, Hanford, April 13-14, 2010.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Chapter 3 - Islamic Banking Products and Services.pptx
Fischer - Importance of Quality Control in Using LiDar
1. Importance of QA in LiDAR Collects and Applications within Watershed Districts Presented to: North Dakota State Water Commission Bismarck, ND Presented by: Brian Fischer, CFM GIS Project Manager Jerry Bents, PE Vice President Mark Deutschman, PE, PhD Vice President June 4, 2009
2.
3. LiDAR Products (Hallock, MN) Bridge RAW Bare Earth Aerial Photo Hybrid Image
![Quality Assurance ,[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)