It is a guidance based seminar presentation for specially civil engineering students in final year project
Also it is very much informative for current new research are and new innovative topics in civil engineering
Transition curve and Super-elevation
Transition Curve
Objectives of Transition Curve
Properties Of Transition Curve
Types Of Transition Curve
Length Of Transition Curve
Superelevation
Objective of providing superelevation
Advantages of providing superelevation
Superelevation Formula
Numerical
Design of rigid pavements. IRC method of design of rigid pavement. Transportation Engineering. Civil Engineering. Wheel loads on rigid pavement. Action of various stresses on rigid pavement. Highway engineering. How rigid pavements different from flexible pavements
Transition curve and Super-elevation
Transition Curve
Objectives of Transition Curve
Properties Of Transition Curve
Types Of Transition Curve
Length Of Transition Curve
Superelevation
Objective of providing superelevation
Advantages of providing superelevation
Superelevation Formula
Numerical
Design of rigid pavements. IRC method of design of rigid pavement. Transportation Engineering. Civil Engineering. Wheel loads on rigid pavement. Action of various stresses on rigid pavement. Highway engineering. How rigid pavements different from flexible pavements
For good condition of pavement, an engineer should have to silent knowledge about failures and causes of pavement to minimize the road accident and for better life of road highway.
Friction Considerations : The friction of skid resistance between vehicle tyre and pavement surface is one of the factors determining the operating speed and the minimum distance requires for stopping of vehicles.
Unevenness : The longitudinal profile of the road pavement has to be even' in order to provide a good riding comfort to fast moving vehicles
Light Reflecting Characteristics : Night visibility depends upon the colour and light reflecting characteristics of the pavement surface. The glare caused by the reflection of head lights is considerably high on wet pavement surface than on the dry pavement.
Drainage of Surface Water
Grillage Analysis of T-Beam bridge, Box culvert and their Limit State Design; components of Bridges and loads acting on bridges are presented in this slide.
Reservoir Planning: Introduction; Investigations for reservoir planning; Selection of site for a reservoir; Zones of storage in a reservoir; Storage capacity and yield; Mass inflow curve and demand curve; Calculation of reservoir capacity for a specified yield from the mass inflow curve; Determination of safe yield from a reservoir of a given capacity; Sediment flow in streams; Life of reservoir; Reservoir sediment control; flood routing. Various types of Spillways and design.
- The Caissons is used for the purpose of placing a foundation in correct position under water.
- Three types of Caissons
1) Open Caisson
2) Box Caisson
3) Pneumatic Caisson
Useful for First year Engineering Students of Savitribai Phule Pune university, Pune (University of Pune) [Common to all Branches]
This PPT shows the details regarding Introduction to Civil Engineering.
This is first Module from the subject Basic Civil and Environmental Engineering. [101005]
Few more PPTs and Videos are available at my blog tusharhsonawane.wordpress.com
A Suitable Challenging Position To Improve The Work Efficiency Leading To More Success, And Also To Enhance My Potentials And Further Sharpen My Skill That Suit My Qualifications Mentioned In My CV.
For good condition of pavement, an engineer should have to silent knowledge about failures and causes of pavement to minimize the road accident and for better life of road highway.
Friction Considerations : The friction of skid resistance between vehicle tyre and pavement surface is one of the factors determining the operating speed and the minimum distance requires for stopping of vehicles.
Unevenness : The longitudinal profile of the road pavement has to be even' in order to provide a good riding comfort to fast moving vehicles
Light Reflecting Characteristics : Night visibility depends upon the colour and light reflecting characteristics of the pavement surface. The glare caused by the reflection of head lights is considerably high on wet pavement surface than on the dry pavement.
Drainage of Surface Water
Grillage Analysis of T-Beam bridge, Box culvert and their Limit State Design; components of Bridges and loads acting on bridges are presented in this slide.
Reservoir Planning: Introduction; Investigations for reservoir planning; Selection of site for a reservoir; Zones of storage in a reservoir; Storage capacity and yield; Mass inflow curve and demand curve; Calculation of reservoir capacity for a specified yield from the mass inflow curve; Determination of safe yield from a reservoir of a given capacity; Sediment flow in streams; Life of reservoir; Reservoir sediment control; flood routing. Various types of Spillways and design.
- The Caissons is used for the purpose of placing a foundation in correct position under water.
- Three types of Caissons
1) Open Caisson
2) Box Caisson
3) Pneumatic Caisson
Useful for First year Engineering Students of Savitribai Phule Pune university, Pune (University of Pune) [Common to all Branches]
This PPT shows the details regarding Introduction to Civil Engineering.
This is first Module from the subject Basic Civil and Environmental Engineering. [101005]
Few more PPTs and Videos are available at my blog tusharhsonawane.wordpress.com
A Suitable Challenging Position To Improve The Work Efficiency Leading To More Success, And Also To Enhance My Potentials And Further Sharpen My Skill That Suit My Qualifications Mentioned In My CV.
A Talented, Results-driven Civil Engineering Professional with 10 years 07 month of Experience in Construction of Infrastructure, Roads, utilities, and Landscaping in the site inspections, supervision, quality control and construction management. Possess excellent analytical, problem solving, negotiation, client-contractor-consultant coordination, technical correspondence, management, communication, interpersonal and computer skills.
Steel building Graded Unit Civil Engineering Project HND Project Glasgow Kel...Tehmas Saeed
This was my second Graded unit Project, it involved construction of Steel framed Office building, based on HND modules we were advised to devise solution of Steel building which two areas of specialisation in which I chose Sustainability and Frame Structure. This assignment does not have drawings and calculations unfortunately i have lost them, however their is a copy at Former Stow College now Glasgow Kelvin college so students can access from there. For any structural help, I would strongly advise to meet Mr Murdo a very competent lecturer in Kelvin college.
Although its rough guide, we were not heavily using journals at that stage, as we relied mostly on our course material. However some of the Green material which i used was taken from companies publications.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Similar to Project Guidance Seminar for Civil Engineering final year students (20)
Combine piled raft foundation (cprf)_Er.Karan ChauhanEr.Karan Chauhan
Combine Piled Raft Foundation(CPRF) is an emerging type of new foundation techniques in High rise buildings and skyscraper which raft as a shallow foundation and pile as deep foundation works sharing the total load and reduce settlement and bending moment. the modern approach of design philosophy is included in post graduation level with soil structure interaction of CPRF and this will use to understand the basic concept regarding it.
This includes different method of treatments given in the time of building construction like : Anti termite treatment, water proofing, fire proofing, acoustical architectural, thermal insulation etc.
This is useful for civil engineering students in their subject Building construction offered by GTU. This presentation includes Timbering of trenches, Scaffolding, Shoring 7 underpinning techniques used in construction of building for temporary period of time.
Types of Stairs & Staircase in Building ConstructionEr.Karan Chauhan
Staircase types & design or geometry of staircase is useful for civil engineering students in 2nd year of building construction subject. with will guide to students for understand requirements of good stairs, design dimensions,types of staircase etc.
This presentation is useful for GTU students in Building Construction subject in Subsurface investigation the popular topic in syllabus, this includes more images which will help to students & researchers for same.
Doors,Windows & Ventilator in Building ConstructionEr.Karan Chauhan
Doors, Windows & Ventilator is a part of building component which is allow to Air & light move & circulate inward & outward, with in door Human or any other material can be move inside or outside also. here types of doors & windows & ventilation are given with necessity of location, function etc.
It is purely related with lower depth of footing and according to type of sub-soil which foundation type we have to use that core knowledge required with this topic we can get sound knowledge of it. This ppt is purely based on Gujarat Technological University syllabus.
Hydrological Cycle give knowledge about how water evaporate transpiration and precipitate in atmosphere...It is also give ratios and percentage of water stored in different region how we can utilize it from this cycle, It is complete study of Water cycle travelling in earths surface and sub-surface.
Building Construction subject is basic subject for understand construction techniques,methods and it is also foundation subject for learn Building Planning & drawing + advance construction technology
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Project Guidance Seminar for Civil Engineering final year students
1. Project Guidance Seminar
Prepared By:-
Prof. Karan S. Chauhan
Assistant Professor
@Shri Labhubhai Trivedi Institute Of
Engineering And Technology, Rajkot
2. First step is to select group partners/members
Second step is pickup a topic that would you enjoy for work
Consider ideas that sound interesting because of a desire to
know more about a subject, a desire to learn how to use a
particular software package, or a goal of working
professionally in this area after graduation
You can think of developing a system or application or
proposal that is applicable in real life situation. For this you
can find a company, and develop a useful software for them.
Chances are, you might be hired once you finish your
studies.
3. Defining the objectives of the project.
Acquiring background information about the
problem and its possible solutions.
Establishing the criteria by which your
solution(s) to the problem will be judged
Determining by what process the work will be
carried out.(Methodology)
Planning the detailed phases of the project.
Adopting one or more design methodologies.
Evaluating your solution to the problem.
Make model/prototype for better evaluation of
your work.
Reporting on your work.
4. The “Overachiever” Problem (A common problem is
selecting a topic that is far too ambitious for the
allotted time).
The “Do It Tomorrow” Problem.
The “Sleeping Member” Problem.
5. 1. Advanced Surveying related
2. Soil Mechanics & Foundation Engineering related
3. Advanced Concrete Technology related
4. Advanced Techniques for Building Construction related
5. Engineering Economics related
6. Hydrology, Hydraulic & Irrigation Engineering related
7. Environment related & Waste management related
8. Analysis or Designs related Railway, Bridge related
9. Highway & Transportation related
10. Structure related in RCC & Steel works related
11. Pre-stress & Post-tensioning techniques in construction related
12. Construction planning & management
13. Town planning related
14. Earthquake engineering related
6. Main Field is…….
GIS, GPS, Remote sensing, Map preparation etc.
Applications of GIS in Civil Engineering
Transportation
Watershed analysis
Wastewater, storm water and Solid Waste Management
7. It can be studied and doing research or project work regarding Soil properties
where it is most use.
Project can be done on different types of soil and can be work done on it.
Project work needs to check…
All Atterberg’s Limits, Stresses in Soil Mass, Soil Analysis, Compaction of Soil,
Shear Strength of Soil, Bearing Capacity, Modes of Shear Failure in Soil,
Different types of foundation on different types of soil
All this can be used on design of foundation(different types of foundation used
on different types of soil)
8. Concrete is Universal used material.
Its Life, durability, properties, cost can be change with different proposals of
changes material, quantity, quality, chemical & physical properties etc. can be
studied & tested by doing project or research work.
Types of concrete
Decorative Color concrete
High-Strength Concrete
High Performance Concrete
Air Entrained Concrete
Light Weight Concrete
Self Compacting Concrete
Shotcrete
Pervious Concrete
9. known as the mother of all engineering, it is the oldest, most simple and useful
of all engineering sciences.
Civil engineering is field of engineering sciences, related to construction,
design and maintenance of buildings, dams, bridges, tunnels, highways etc.
Building Construction and Design in Different types of floors & joints, RCC &
Masonry with different failure study, design in components of building like
Formwork design, Staircase design, Deep Beams, Long/Short column, Slabs,&
most important Factor of safety in building construction ,sub soil surface
investigation, precast concrete structure.
10. Study on Change & development in hydrological cycle, water balance,
evaporation, transpiration, precipitation, evapotranspiration etc.
Flood runoff Analysis, Ground water occurrence & supplies
Improvement for surface & sub surface irrigation by using different
types irrigation methods
Applications of Hydrology Engineering
Design of irrigation canal and comparison of irrigation system
Applications in Design & Operation of Hydraulic Structures
Planning & Building of Hydraulic Structures
Prediction of floods
Design of Water Supply Schemes
Prediction of Precipitation
Design of Drainage Systems
11. Recycling Of Waste Water (Domestic & Industrial)
Ground water pollution and treatments for it
Rain water harvesting system
Pollution study of different rivers
Rural water crisis & quality survey
Arsenic Removal From Ground Water By Coagulation
Status Report On Drinking Water Quality In different cities
Study Of Heavy Metals in Surface and sub surface water
Draught Analysis And Water Conservation Of different places in
India
GIS – For Rain Water Recharge To Enhance The Ground Water
A Case Study Of Institutional Water Supply And Waste Disposal
Systems
12. Pollution control with health benefits,
Fresh & Sea water related
Water distribution network planning
proposals
Drinking water standard related comparative
study
14. High speed train planning proposal
Infrastructure design planning proposal of
modern railway station
Design of sleepers
Analysis & design of railway bridges
15. Foot over bridge designs
Highway pavement (Flexible & Rigid) design with
different types of material and comparative
analysis and design proposal
Traffic awareness & solution at different places
Rate analysis and estimation of different type of
roads & pavement
Stabilization sub grade of using Geo textiles or
other fibres
Pavement Surface Unevenness Evaluation
Accident Prone area study
16. Analysis & Design of Beams, Columns, Frames, Plates, Slabs,
etc.
Dynamic Analysis, Finite element analysis
Design of Concrete, Masonry, Steel, Wood
Pre-stress & Post tensioning in different building components
Design in RCC & Steel
Determine min. reinforcement in structure
Analysis of Different types of loads on different components
of building using different software packages
List of Software like,
STAD-PRO, SAP2000, E-TABS, CSI BRIDGE, ANSYS,
SAFE, LUSAS. ETC.
17. Construction & estimations of Residential,
Commercial, Industrial, educational, hospital
& public Building.
Construction& estimations of High Raised
Building
Cost Control Cost Management Techniques
Project Control Schedule Value Engineering
Construction Project Quality Management
Construction Scheduling
18. Seismic Behaviour Analysis Of different types
structure
Advanced Earthquake Resistant Techniques
Failure Of Foundation Due To Earthquake
Seismic Behaviour & Design Of RC Shear Walls
Innovations In Earthquake Proof Structures
Earthquake Disaster Mitigation
19. Web :- www.projects.gtu.ac.in
Register by your Enrollment number.
After approval of HOD Sir, your registration
will be confirmed by GTU
Then register your name with your team
member & fill required project detail.
23. Abstract :- You begin your Final Report with a
Abstract. In one page, certainly not more than
two, list the main features of your project,
what problem you were solving and how you
solved it.
Chapter 1 Introduction :- How did the
problem originally present itself to you in the
first place, and how did it evolve over the
course of the project. Give a detailed
summary of the problem as well as a review
of the literature or the market survey.
24. The Solution :- Describe your solution in
detail.
The Implementation Process/Results :-
Describe the process you went through to
complete the project and compare what
actually happened with the goals you were
trying to achieve.
Conclusion :- What has been accomplished
and what are the major things that you
learned from this project? What work still
needs to be done on the system and how can
it be improved and/or enhanced? Do you
have any future plans for this software
package?
25. References :- Include here all materials
referenced within your report.
Appendix/Annexure :- Include all relevant
documentation, computer coding, screen shots,
Photographs, Designs etc.