CEP FEA

1. Finite Element Analysis
Title
Analyze The Reinforce Concrete Water Tank On Ansys
DEPARTMENT OF INDUSTRIAL & MANUFACTURING ENGINEERING 1
UNIVERSITY OF ENGINEERING & TECHNOLOGY LAHORE

2. Group#1
Presenters
Abu Huraira(2020-IM-7)
Muhammad Asim(2020-IM-14)
Faizan Rehman(2020-IM-24)
Ali Nawaz (2020-IM-33)
Presented to
Dr. Rakshanda Naveed
2

3. Contents
 Problem Statements
 Objectives
 Introduction
 Methodology
 Design
 Conclusion
References
3

4. Problem Statement
4

5. Problem Statement
This Complex water tank design, a robust concrete and
steel reinforcement system while its structure appear
resistant, concern exist about uneven load distribution
and internal pressure effect. A thorough structural analysis
using ansys and finite element method is crucial. This will
assess the tanks static behaviour and under water load
and internal pressure, ultimately verifying its integrity and
durability
5

6. Objectives
6

7. Objectives
7
To analyze the real life structure of beam and
column by using Ansys
Apply concept of Finite Element analysis on
structural Elements

8. Introduction
8

9. Reinforce Concrete Water Tank of UET LHR
 Constructed for storing water
 Capacity of water tank is 30,000 gallons
 Elevation is approximately 56ft
 Filter plant room is on the ground under the tank
 Stairs are available for the internal inspection of water
tank
9

10. 10

11. Methodology
11

12. Methodology
 Design Structure on solid Work
 Convert into Ansys workbench
 Apply Pressure and Load on the Structure
 Evaluate different Scenarios
 Conclude result and analysis
12

13. Design
13

14. Design of water Tank for Analysis
 Tank was design on Solid Work
 Structure was reinforce by putting rods on it
 It has 9 vertical columns and rectangular tank stand on it
 Approximately 40 horizontal beams available in structure
 2 inlets and 3 outlets pipes are available in structure
14

15. 15

16. 16

17. Analysis on Ansys
17

18. Analysis on Ansys
18
Parameters Description Values
Stress
Strain
Max Deflection
Load/Pressure
Reaction Forces

19. Root Cause Analysis
19

20. References
20
P. A. D. S. A. R. Viabhav R. Desale, "Finite element Analysis on rectangular water tank
propped at top for partially filled condition considering effect of edge rotation," JETIR,
vol. 6, no. 5, pp. 300-307, 2019.
M. B. Safdar, "Comparative Analysis and Design of Elevated Water Tank using
Conventional and BIM Approach," CAPITAL UNIVERSITY OF SCIENCE AND
TECHNOLOGY, ISLAMABAD, ISLAMABAD, 2020.
M. A. A. Umer Farooq, "Finite Element Approach to reinforced concrete using ansys,"
Conference paper, 2014.
[1]
[2]
[3]]

21. THANK YOU
For Giving Attention
21