FAIRCRETE FBR(S) is a styrene butadiene rubber liquid additive that improves the properties of concrete and mortar by increasing flexural strength, tensile strength, and adhesion while reducing shrinkage and permeability. It can be used for structural rehabilitation, waterproofing, floors, and concrete repairs. FAIRCRETE FBR(S) enhances the cohesion and workability of concrete mixtures and provides excellent bonding to concrete, masonry, and other surfaces.

1. FAIRCRETE FBR(S)
STYRENE BUTADIENE RUBBER POLYMER
FOR CONCRETE / MORTAR

2. Benefits
 Excellent adhesion to reinforcement & concrete.
 Increased flexural strength.
 Increased tensile strength
 Compressive strength comparable to that of concrete.
 Reduced shrinkage.
 Reduced water permeability.
 Improved chemical resistance.
 Chloride free.
 Improves cohesion and workability.
 Single component liquid, can be easily gauged as required.
 Excellent bond to Concrete, Masonry, stone work, Plaster and brick
board.

3. Uses
FAIRCRETE FBR(S) can be used for structural rehabilitation, waterproofing
treatment, floor, screeds, & topping and for concrete repairs, Bonding
concrete repair mortars, Bonding agent for slip bricks, ceramic tiles etc.

4. Description
FAIRCRETE FBR(S) is a styrene butadiene rubber specially formulated for
use with cement formulation.

5. Properties
Freeze thaw stability : Withstands at least 5 freeze thaw cycles,
but storage in covered areas above 5ºC
recommended.
Stabilisation : Non Ionic
Anti Oxidant : Yes
Bactericide : Yes
Antifoam : Yes
Minimum film forming
temperature : About 1ºC

6. Packing & Coverage
FAIRCRETE FBR(S) is available in 1, 5, 10, 20, 50, 100 & 200 ltrs.

7. Packing & Coverage
FAIRCRETE FBR(S) is available in 1, 5, 10, 20, 50, 100 & 200 ltrs.