Example flow process charts
•Download as PPTX, PDF•
16 likes•48,878 views
The document describes different types of process charts used in manufacturing including flow process charts to illustrate the steps in a process, multiple activity charts to show multiple concurrent processes, man-machine charts to depict interactions between workers and equipment, and Simo charts to represent the flow of materials.
Report
Share
Report
Share
Recommended
Flow process chart
This document discusses flow process charts. It begins by explaining that a flow process chart provides a graphical presentation of all operations, inspections, delays, and storage that occur during a process, including necessary information like time required and quantity moved. It then describes the types of flow process charts for men, materials, and equipment. Several examples of flow process chart symbols are shown and explained. The document concludes by providing an example flow process chart for a typist's work and noting the key information typically shown in such charts.
Most (Maynard Operation Sequence Technique)
This document provides an overview of fundamentals of work measurement techniques, including a comparison of MTM-1, MTM-2, and MTM-3. It also describes Maynard Operation Sequence Technique (MOST), including features of MOST, MOST work measurement systems, time measurement units, sequence models, and how to perform analysis using MOST. Key elements like general moves, controlled moves, and tool use are explained.
Method study
This document discusses methods engineering and method study. It describes method study as the systematic analysis and examination of work methods to develop more effective procedures. The key steps of method study include selecting processes to study, recording current methods, examining recordings for inefficiencies, developing improved methods, evaluating changes, defining new standards, installing changes, and maintaining improvements. A variety of charts and diagrams are used to record work including flow diagrams, string diagrams, process charts, and therblings analysis which divides tasks into elemental motions. The overall aim is to eliminate unnecessary steps and make processes more efficient.
Lecture 2 process charts work study
A Simo chart records the simultaneous motions of different body parts of a worker(s) on a common time scale, often based on analyzing filmed footage of an operation. It shows the therbligs or groups of therbligs performed by different parts of the body. Simo charts are used for short, rapid operations and are generally compiled from slow motion or paused film footage. They provide a micromotion-level view of an operation analogous to a man-type flow process chart. Movements are recorded against time measured in "winks" from a counter visible in filmed footage.
UNIT 2 - WORK STUDY
This document discusses work study and method study. It provides:
- An overview of work study and its objectives of efficiently utilizing resources to achieve quality work.
- Details on method study, which systematically examines work methods to develop easier and more effective techniques.
- The objectives of method study, which include improving processes, working conditions, and reducing effort.
- The basic procedure for method study, which involves selecting work, recording existing methods, examining facts critically, developing improved methods, defining and installing new methods, and maintaining changes.
Line balancing
This document provides an overview of line balancing. It defines line balancing as assigning tasks to workstations to equalize workloads and cycle times. The objectives of line balancing include equalizing workloads, identifying bottlenecks, establishing production speeds, determining staffing needs, and reducing costs. Common methods are described along with concepts such as precedence diagrams, work content, and cycle times. A simple example is provided to demonstrate how to balance a line to increase efficiency from 79% to 84% by redistributing tasks among five workstations. The document emphasizes eliminating waste to further improve efficiency.
assembly line balancing
This document discusses line balancing, which involves assigning tasks along an assembly line to workstations in order to achieve minimum idle time and meet production rates. It defines key terms like cycle time, station time, line efficiency, and smoothness index. It also covers precedence constraints, which restrict the order that work elements can be completed in. Finally, it outlines several common line balancing methods, including Helgeson and Birnie's Ranked Positional Weight method, Kilbridge and Wester's region approach, and the Largest Candidate Rule.
Micro-Macro Motion Study
This document discusses work measurement techniques including method study, work measurement, micro-motion study, and therbligs. Micro-motion study involves filming operations to analyze motions, recording data using SIMO charts, and identifying unnecessary movements. It aims to standardize efficient work methods. Principles for efficient work include using both hands simultaneously, employing momentum, continuous curved motions, and designing tools for easy access and mechanical advantage.
Recommended
Flow process chart
This document discusses flow process charts. It begins by explaining that a flow process chart provides a graphical presentation of all operations, inspections, delays, and storage that occur during a process, including necessary information like time required and quantity moved. It then describes the types of flow process charts for men, materials, and equipment. Several examples of flow process chart symbols are shown and explained. The document concludes by providing an example flow process chart for a typist's work and noting the key information typically shown in such charts.
Most (Maynard Operation Sequence Technique)
This document provides an overview of fundamentals of work measurement techniques, including a comparison of MTM-1, MTM-2, and MTM-3. It also describes Maynard Operation Sequence Technique (MOST), including features of MOST, MOST work measurement systems, time measurement units, sequence models, and how to perform analysis using MOST. Key elements like general moves, controlled moves, and tool use are explained.
Method study
This document discusses methods engineering and method study. It describes method study as the systematic analysis and examination of work methods to develop more effective procedures. The key steps of method study include selecting processes to study, recording current methods, examining recordings for inefficiencies, developing improved methods, evaluating changes, defining new standards, installing changes, and maintaining improvements. A variety of charts and diagrams are used to record work including flow diagrams, string diagrams, process charts, and therblings analysis which divides tasks into elemental motions. The overall aim is to eliminate unnecessary steps and make processes more efficient.
Lecture 2 process charts work study
A Simo chart records the simultaneous motions of different body parts of a worker(s) on a common time scale, often based on analyzing filmed footage of an operation. It shows the therbligs or groups of therbligs performed by different parts of the body. Simo charts are used for short, rapid operations and are generally compiled from slow motion or paused film footage. They provide a micromotion-level view of an operation analogous to a man-type flow process chart. Movements are recorded against time measured in "winks" from a counter visible in filmed footage.
UNIT 2 - WORK STUDY
This document discusses work study and method study. It provides:
- An overview of work study and its objectives of efficiently utilizing resources to achieve quality work.
- Details on method study, which systematically examines work methods to develop easier and more effective techniques.
- The objectives of method study, which include improving processes, working conditions, and reducing effort.
- The basic procedure for method study, which involves selecting work, recording existing methods, examining facts critically, developing improved methods, defining and installing new methods, and maintaining changes.
Line balancing
This document provides an overview of line balancing. It defines line balancing as assigning tasks to workstations to equalize workloads and cycle times. The objectives of line balancing include equalizing workloads, identifying bottlenecks, establishing production speeds, determining staffing needs, and reducing costs. Common methods are described along with concepts such as precedence diagrams, work content, and cycle times. A simple example is provided to demonstrate how to balance a line to increase efficiency from 79% to 84% by redistributing tasks among five workstations. The document emphasizes eliminating waste to further improve efficiency.
assembly line balancing
This document discusses line balancing, which involves assigning tasks along an assembly line to workstations in order to achieve minimum idle time and meet production rates. It defines key terms like cycle time, station time, line efficiency, and smoothness index. It also covers precedence constraints, which restrict the order that work elements can be completed in. Finally, it outlines several common line balancing methods, including Helgeson and Birnie's Ranked Positional Weight method, Kilbridge and Wester's region approach, and the Largest Candidate Rule.
Micro-Macro Motion Study
This document discusses work measurement techniques including method study, work measurement, micro-motion study, and therbligs. Micro-motion study involves filming operations to analyze motions, recording data using SIMO charts, and identifying unnecessary movements. It aims to standardize efficient work methods. Principles for efficient work include using both hands simultaneously, employing momentum, continuous curved motions, and designing tools for easy access and mechanical advantage.
CYCLE AND CHRONOCYCLE GRAPH
DESCRIBED REAL PERFORMED EXPERIMENT WITH PARTICULAR PEN AND CAP INTERCHANGE ACTIVITY
ACTIVITY-1) INTERCHANGE BY BOTH HANDS
ACTIVITY-2) MOVE BY SINGLE HAND
Therbligs details
The document discusses the basic motion elements or "therbligs" used in work measurement and analysis. It describes the 18 standardized therbligs which represent fundamental manual motions. These include elements like reach, grasp, transport, hold, release, position, use, assemble, etc.
It then provides an example of how therbligs can be used to analyze the motions in a simple task like shaving. Each motion, such as locating the razor, selecting it, grasping it, and positioning it on the face, is represented by a therblig.
Finally, it introduces the concept of work factor analysis which breaks down manual tasks into standardized motion elements and assigns time values in order to set productivity standards.
Industrial Engineering
Industrial engineering is concerned with optimizing complex processes and systems. Industrial engineers work to eliminate waste and improve quality and productivity across various domains. They apply principles of engineering, business, and management science. Some key goals of industrial engineering include developing integrated systems involving people, equipment, and processes, and specifying and evaluating results. Modern industrial engineering utilizes tools like simulation, mathematical modeling, and computational methods to analyze, evaluate, and optimize systems.
Method study
it is a WORD FILE for METHOD STUDY.
college btech students specially MECHANICAL ENGNN. and PROFESSORS can access this file.
it is HELPFUL for an idea about the topic, for EDUCATION purpose and for PRESENTATION PAPER WORK IN SEMINARS etc.
Line balancing and its formulation
Line balancing and how the productivity can be optimized through the help of formula and by working of 4Ms
Most complete
The document provides an overview of the Maynard Operation Sequence Technique (MOST), a work measurement system developed in the late 1960s as an extension of MTM. MOST analyzes manual work by breaking it down into standard sequences of basic motions for moving objects, known as the General Move sequence and Controlled Move sequence. It provides predetermined time values for different types of motions that can be combined to calculate the time required for a work cycle. The document defines each motion parameter in the General Move, Controlled Move, and Tool Use sequences and provides examples of how MOST can be applied.
Recording techniques used in method study ppt
This document provides information on method study techniques for analyzing work processes. It defines method study and outlines its goals of improving efficiency and reducing costs. It then describes various process chart types for visually documenting work sequences, such as flow process charts, man-machine charts, and two-handed process charts. It also explains the symbols used in process charts and provides examples of charts mapping different work processes. Finally, it briefly introduces the technique of micro motion study for highly detailed analysis of short-cycle operations.
PREDETERMINED MOTION TIME SYSTEM (PMTS).pptx
Time study is a work measurement technique used to establish the time required for a qualified worker to complete a specified job at a defined performance level. It involves breaking down jobs into individual elements, observing and timing each element, and analyzing the data to set standard times. The standard times account for allowances to determine the total time a worker should take when average conditions and methods are used. Work sampling is a related technique that uses random observations to determine the percentage of time workers or machines spend on different activities.
Method study
Method Study, Objective of method study, Pre-requisites for method study, Steps/basic procedure in method study, different method recording techniques,
Work Study- Methods Study
Work Study consists of two techniques, Method Study and Work Measurement, This PPT covers in detail Method Study also known as Motion Study.
Ch17 Mrp
The document discusses materials requirements planning (MRP), which coordinates the flow of components and inputs through the production process. MRP was developed after World War II to improve upon quarterly ordering systems as demand became more based on forecasts rather than confirmed orders. It takes production forecasts and breaks them down into weekly schedules using a bill of materials to determine dependent demand for components. MRP provides schedules and priorities to help manage inventory levels and avoid stockouts. It requires accurate data on master production schedules, bills of materials, inventory levels, and order status.
Assembly line balancing
The document discusses assembly line balancing which aims to arrange individual tasks across workstations so that the processing time is approximately equal at each station. Key points include:
- Tasks have a required sequence (precedence constraints) that cannot be violated.
- The production rate needed must be met within these constraints.
- Terminology defined includes work elements, total work content, workstation times, cycle time, and balance delay.
- The largest candidate rule is presented as a method where tasks are assigned in descending order of time to the first station that does not exceed the cycle time while respecting precedence constraints.
Line balancing
This document discusses line balancing, which involves arranging machine capacity and workstation tasks to ensure uniform workflow and minimize idle time. It aims to balance workloads, identify bottlenecks, determine the optimal number of workstations, and reduce costs. The key aspects of line balancing are precedence constraints, which require some tasks to be completed before others, and cycle time restrictions, which set a maximum time for each workstation. Balanced lines promote efficient one-piece flow and minimize waste, while unbalanced lines cause excessive workload, variation and idle time. The line balancing process involves drawing precedence diagrams, determining cycle times, assigning tasks to workstations, and calculating line efficiency.
engineering
This document provides an introduction to industrial engineering. It defines industrial engineering as concerned with designing integrated systems of people, equipment, and materials to increase productivity by eliminating waste and improving resource utilization. The history of the field is traced from Adam Smith's division of labor concepts to contributions from Taylor, Gantt, the Gilbreths, and others. The primary activities and objectives of industrial engineering are to establish methods for improving operations and controlling costs. Techniques used include method study, time study, ergonomics, and operations research.
8. chapter 7 work study (time and motion study)
The document discusses work study, which aims to improve work methods and establish standard times for work. It is comprised of two techniques: method study, which examines existing and proposed ways of doing work to develop easier and more effective methods; and work measurement, which establishes time standards for jobs. There is a close relationship between method study, which focuses on reducing work content and establishing the best method, and work measurement, which investigates ineffective time and establishes time standards. Productivity, work study techniques, method study procedures, and factors influencing productivity are also covered at a high level.
TIME STUDY
Time study is a work measurement technique that determines the time for a qualified worker to complete a task at a defined level of performance. It involves observing and recording the time required by a worker to perform individual tasks in their regular work. The objectives of time study include increasing productivity, setting labor standards, and determining basic and standard times. It is used to analyze elements of a job, set performance standards, and improve work methods and processes.
Industrial Engineering
Industrial Engineering is concerned with designing integrated systems involving people, materials, equipment and energy. Some significant events in its development include the division of labor, standardized parts, scientific management, the assembly line, and quality control methods. Productivity is a measure of output over input, with higher productivity indicating more output is generated from the same level of inputs. Factors like technology, capacity utilization, and training can affect productivity levels in an organization.
Time study
This document describes the process of conducting a time study to determine the standard time for a core-making operation. It involves breaking the job down into elements, directly observing and timing each element's performance, determining basic time and allowances, and calculating the overall standard time. Standard time accounts for factors like observed time, ratings, relaxation, fatigue, and contingencies. The example time study observed and recorded the timing of elements of a core-making job like filling a core box with sand, pressing it down, and transporting the completed core. Standard time was then set for each element and summed to establish the total standard time per cycle.
Introduction to IE
The document provides a history of industrial engineering and discusses its evolution. It describes how early pioneers like Charles Babbage, Frederick Taylor, and Frank Gilbreth contributed to the foundations of the field through analyzing factory operations and worker motions. It also discusses how industrial engineering draws upon various sciences and engineering principles to design integrated systems involving people, equipment, and processes. The document traces how the field has grown and diversified over time to involve a wide range of applications across many different industries.
World Quality Day 2011 - Kaizen Format
This document summarizes a Kaizen report from a company. The report describes an improvement made in a department or section's process. It includes details on the before and after situations through photographs and data, the identified root cause, improvement measures taken, and benefits realized. Participation in the improvement effort is also acknowledged. The report requests authorization to share the kaizen case details with the wider business community to promote continual improvement practices.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
More Related Content
What's hot
CYCLE AND CHRONOCYCLE GRAPH
DESCRIBED REAL PERFORMED EXPERIMENT WITH PARTICULAR PEN AND CAP INTERCHANGE ACTIVITY
ACTIVITY-1) INTERCHANGE BY BOTH HANDS
ACTIVITY-2) MOVE BY SINGLE HAND
Therbligs details
The document discusses the basic motion elements or "therbligs" used in work measurement and analysis. It describes the 18 standardized therbligs which represent fundamental manual motions. These include elements like reach, grasp, transport, hold, release, position, use, assemble, etc.
It then provides an example of how therbligs can be used to analyze the motions in a simple task like shaving. Each motion, such as locating the razor, selecting it, grasping it, and positioning it on the face, is represented by a therblig.
Finally, it introduces the concept of work factor analysis which breaks down manual tasks into standardized motion elements and assigns time values in order to set productivity standards.
Industrial Engineering
Industrial engineering is concerned with optimizing complex processes and systems. Industrial engineers work to eliminate waste and improve quality and productivity across various domains. They apply principles of engineering, business, and management science. Some key goals of industrial engineering include developing integrated systems involving people, equipment, and processes, and specifying and evaluating results. Modern industrial engineering utilizes tools like simulation, mathematical modeling, and computational methods to analyze, evaluate, and optimize systems.
Method study
it is a WORD FILE for METHOD STUDY.
college btech students specially MECHANICAL ENGNN. and PROFESSORS can access this file.
it is HELPFUL for an idea about the topic, for EDUCATION purpose and for PRESENTATION PAPER WORK IN SEMINARS etc.
Line balancing and its formulation
Line balancing and how the productivity can be optimized through the help of formula and by working of 4Ms
Most complete
The document provides an overview of the Maynard Operation Sequence Technique (MOST), a work measurement system developed in the late 1960s as an extension of MTM. MOST analyzes manual work by breaking it down into standard sequences of basic motions for moving objects, known as the General Move sequence and Controlled Move sequence. It provides predetermined time values for different types of motions that can be combined to calculate the time required for a work cycle. The document defines each motion parameter in the General Move, Controlled Move, and Tool Use sequences and provides examples of how MOST can be applied.
Recording techniques used in method study ppt
This document provides information on method study techniques for analyzing work processes. It defines method study and outlines its goals of improving efficiency and reducing costs. It then describes various process chart types for visually documenting work sequences, such as flow process charts, man-machine charts, and two-handed process charts. It also explains the symbols used in process charts and provides examples of charts mapping different work processes. Finally, it briefly introduces the technique of micro motion study for highly detailed analysis of short-cycle operations.
PREDETERMINED MOTION TIME SYSTEM (PMTS).pptx
Time study is a work measurement technique used to establish the time required for a qualified worker to complete a specified job at a defined performance level. It involves breaking down jobs into individual elements, observing and timing each element, and analyzing the data to set standard times. The standard times account for allowances to determine the total time a worker should take when average conditions and methods are used. Work sampling is a related technique that uses random observations to determine the percentage of time workers or machines spend on different activities.
Method study
Method Study, Objective of method study, Pre-requisites for method study, Steps/basic procedure in method study, different method recording techniques,
Work Study- Methods Study
Work Study consists of two techniques, Method Study and Work Measurement, This PPT covers in detail Method Study also known as Motion Study.
Ch17 Mrp
The document discusses materials requirements planning (MRP), which coordinates the flow of components and inputs through the production process. MRP was developed after World War II to improve upon quarterly ordering systems as demand became more based on forecasts rather than confirmed orders. It takes production forecasts and breaks them down into weekly schedules using a bill of materials to determine dependent demand for components. MRP provides schedules and priorities to help manage inventory levels and avoid stockouts. It requires accurate data on master production schedules, bills of materials, inventory levels, and order status.
Assembly line balancing
The document discusses assembly line balancing which aims to arrange individual tasks across workstations so that the processing time is approximately equal at each station. Key points include:
- Tasks have a required sequence (precedence constraints) that cannot be violated.
- The production rate needed must be met within these constraints.
- Terminology defined includes work elements, total work content, workstation times, cycle time, and balance delay.
- The largest candidate rule is presented as a method where tasks are assigned in descending order of time to the first station that does not exceed the cycle time while respecting precedence constraints.
Line balancing
This document discusses line balancing, which involves arranging machine capacity and workstation tasks to ensure uniform workflow and minimize idle time. It aims to balance workloads, identify bottlenecks, determine the optimal number of workstations, and reduce costs. The key aspects of line balancing are precedence constraints, which require some tasks to be completed before others, and cycle time restrictions, which set a maximum time for each workstation. Balanced lines promote efficient one-piece flow and minimize waste, while unbalanced lines cause excessive workload, variation and idle time. The line balancing process involves drawing precedence diagrams, determining cycle times, assigning tasks to workstations, and calculating line efficiency.
engineering
This document provides an introduction to industrial engineering. It defines industrial engineering as concerned with designing integrated systems of people, equipment, and materials to increase productivity by eliminating waste and improving resource utilization. The history of the field is traced from Adam Smith's division of labor concepts to contributions from Taylor, Gantt, the Gilbreths, and others. The primary activities and objectives of industrial engineering are to establish methods for improving operations and controlling costs. Techniques used include method study, time study, ergonomics, and operations research.
8. chapter 7 work study (time and motion study)
The document discusses work study, which aims to improve work methods and establish standard times for work. It is comprised of two techniques: method study, which examines existing and proposed ways of doing work to develop easier and more effective methods; and work measurement, which establishes time standards for jobs. There is a close relationship between method study, which focuses on reducing work content and establishing the best method, and work measurement, which investigates ineffective time and establishes time standards. Productivity, work study techniques, method study procedures, and factors influencing productivity are also covered at a high level.
TIME STUDY
Time study is a work measurement technique that determines the time for a qualified worker to complete a task at a defined level of performance. It involves observing and recording the time required by a worker to perform individual tasks in their regular work. The objectives of time study include increasing productivity, setting labor standards, and determining basic and standard times. It is used to analyze elements of a job, set performance standards, and improve work methods and processes.
Industrial Engineering
Industrial Engineering is concerned with designing integrated systems involving people, materials, equipment and energy. Some significant events in its development include the division of labor, standardized parts, scientific management, the assembly line, and quality control methods. Productivity is a measure of output over input, with higher productivity indicating more output is generated from the same level of inputs. Factors like technology, capacity utilization, and training can affect productivity levels in an organization.
Time study
This document describes the process of conducting a time study to determine the standard time for a core-making operation. It involves breaking the job down into elements, directly observing and timing each element's performance, determining basic time and allowances, and calculating the overall standard time. Standard time accounts for factors like observed time, ratings, relaxation, fatigue, and contingencies. The example time study observed and recorded the timing of elements of a core-making job like filling a core box with sand, pressing it down, and transporting the completed core. Standard time was then set for each element and summed to establish the total standard time per cycle.
Introduction to IE
The document provides a history of industrial engineering and discusses its evolution. It describes how early pioneers like Charles Babbage, Frederick Taylor, and Frank Gilbreth contributed to the foundations of the field through analyzing factory operations and worker motions. It also discusses how industrial engineering draws upon various sciences and engineering principles to design integrated systems involving people, equipment, and processes. The document traces how the field has grown and diversified over time to involve a wide range of applications across many different industries.
World Quality Day 2011 - Kaizen Format
This document summarizes a Kaizen report from a company. The report describes an improvement made in a department or section's process. It includes details on the before and after situations through photographs and data, the identified root cause, improvement measures taken, and benefits realized. Participation in the improvement effort is also acknowledged. The report requests authorization to share the kaizen case details with the wider business community to promote continual improvement practices.
What's hot (20)
Recently uploaded
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Assessment and Planning in Educational technology.pptx
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaHow to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Top five deadliest dog breeds in America
Thinking of getting a dog? Be aware that breeds like Pit Bulls, Rottweilers, and German Shepherds can be loyal and dangerous. Proper training and socialization are crucial to preventing aggressive behaviors. Ensure safety by understanding their needs and always supervising interactions. Stay safe, and enjoy your furry friends!
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Recently uploaded (20)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Assessment and Planning in Educational technology.pptx
Assessment and Planning in Educational technology.pptx
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Example flow process charts
- 5. Man/ Worker Type Flow Process Chart
- 9. Multiple Activity Chart Or Man-Machine Chart
- 12. Simo Chart