eSIM Overview
•
4 likes•2,101 views
The document discusses eSIM technology, which allows for a SIM profile to be transferred wirelessly to a device's embedded SIM chip, removing the need for a physical SIM card. An eSIM provides easier switching between mobile providers by allowing remote provisioning of a new SIM profile. Key benefits of eSIM include improved customer experience through remote switching of providers without needing a new physical SIM card.
Report
Share
Report
Share
Download to read offline
Recommended
e-Sim Sharing (extract)
1) The document discusses the eSIM, which is an embedded SIM card integrated directly into devices rather than a removable SIM card. eSIMs allow remote provisioning of network profiles over-the-air rather than requiring a physical SIM card.
2) eSIMs offer benefits like faster activation, easier switching between carriers, and space savings compared to traditional SIM cards. However, eSIMs could increase the power of device manufacturers over network operators.
3) The introduction of eSIMs and future technologies like soft SIMs may weaken network operators' control over the customer experience and retail channels, as device manufacturers gain more influence over the core network access and SIM management functions.
eSIM Deep Dive
The document provides an overview of eSIM technology:
- eSIM allows the SIM profile to be downloaded wirelessly to an embedded chip rather than using a removable SIM card. This enables easier switching between mobile operators and improved customer experience.
- eSIM provides benefits to mobile operators, SIM suppliers, businesses, and consumers by opening new market opportunities and reducing costs while maintaining security. It allows connectivity management and connected devices/IoT to work more flexibly.
- Key players involved in eSIM include the eUICC chip, subscription managers that generate profiles, and mobile network operators. Remote SIM provisioning specifications define consumer and M2M architectures and elements like profile storage and management.
esim
Presentation Title - Embedded SIM
Preparation - S Sandeep Kumar
UoG - Electronics & Communication (ECE)
Programmable SIM cards, SoftSIMs and eSIMs
Dynamic SIMs will change the mobile industry this year. This presentation describes the differences between the 3 kinds of dynamic SIM, programmable SIM card, SoftSIM and eSIM
e-SIM
E-SIM is an electronic SIM card that replaces the physical SIM card. It allows users to easily switch carriers without inserting a new SIM card. The first devices to use eSIM were the Samsung Gear S2 smartwatch in 2016 and the Apple Watch Series 3. ESIM allows dual SIM functionality on iPhones and makes changing carriers faster and more secure. ESIM provides benefits for IoT applications and connected devices by enabling reliable M2M communication. While eSIM offers advantages like easier roaming and carrier switching, disadvantages include needing to activate each new device's SIM through software.
e-SIM Technology || Electronics || Hariharan K
The document summarizes the evolution of SIM card technology, from physical SIM cards to e-SIM technology. It discusses how early SIM cards were introduced in 2012 and included in smartphones starting in 2017. It then provides details on e-SIM technology, how it embeds the SIM card directly into devices rather than using removable plastic cards. The document outlines the key components of e-SIM including the embedded chip and over-the-air software updates that allow switching carriers without changing the physical SIM card. It discusses the benefits of e-SIM such as ease of use and size reduction compared to physical cards.
eSIM
The document discusses SIM cards and eSIM technology. It explains that SIM cards store user identity information to connect to mobile networks and have decreased in size over time. eSIM is an embedded SIM that is soldered directly onto a device's motherboard, allowing users to easily change carriers without inserting a new SIM card. While eSIM provides benefits like multi-carrier support and improved water resistance, it also has disadvantages such as inability to retrieve data if the device breaks and lack of interchangeability between devices. The document outlines how eSIM works by uploading a profile after scanning a QR code.
Beginners: UICC & SIM
This basic presentation / video looks at SIM (Subscriber Identity Module) card, its evolution and what is the relation between SIM and UICC (Universal Integrated Circuit Card). It also explains different form factors like 2FF, 3FF, 4FF and MFF2 and UICC contents briefly.
Finally, we look at embedded SIM (eSIM), integrated SIM (iSIM), eUICC Profiles and profile switching via remote provisioning functions.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free TrainingVideos: https://www.3g4g.co.uk/Training/
Recommended
e-Sim Sharing (extract)
1) The document discusses the eSIM, which is an embedded SIM card integrated directly into devices rather than a removable SIM card. eSIMs allow remote provisioning of network profiles over-the-air rather than requiring a physical SIM card.
2) eSIMs offer benefits like faster activation, easier switching between carriers, and space savings compared to traditional SIM cards. However, eSIMs could increase the power of device manufacturers over network operators.
3) The introduction of eSIMs and future technologies like soft SIMs may weaken network operators' control over the customer experience and retail channels, as device manufacturers gain more influence over the core network access and SIM management functions.
eSIM Deep Dive
The document provides an overview of eSIM technology:
- eSIM allows the SIM profile to be downloaded wirelessly to an embedded chip rather than using a removable SIM card. This enables easier switching between mobile operators and improved customer experience.
- eSIM provides benefits to mobile operators, SIM suppliers, businesses, and consumers by opening new market opportunities and reducing costs while maintaining security. It allows connectivity management and connected devices/IoT to work more flexibly.
- Key players involved in eSIM include the eUICC chip, subscription managers that generate profiles, and mobile network operators. Remote SIM provisioning specifications define consumer and M2M architectures and elements like profile storage and management.
esim
Presentation Title - Embedded SIM
Preparation - S Sandeep Kumar
UoG - Electronics & Communication (ECE)
Programmable SIM cards, SoftSIMs and eSIMs
Dynamic SIMs will change the mobile industry this year. This presentation describes the differences between the 3 kinds of dynamic SIM, programmable SIM card, SoftSIM and eSIM
e-SIM
E-SIM is an electronic SIM card that replaces the physical SIM card. It allows users to easily switch carriers without inserting a new SIM card. The first devices to use eSIM were the Samsung Gear S2 smartwatch in 2016 and the Apple Watch Series 3. ESIM allows dual SIM functionality on iPhones and makes changing carriers faster and more secure. ESIM provides benefits for IoT applications and connected devices by enabling reliable M2M communication. While eSIM offers advantages like easier roaming and carrier switching, disadvantages include needing to activate each new device's SIM through software.
e-SIM Technology || Electronics || Hariharan K
The document summarizes the evolution of SIM card technology, from physical SIM cards to e-SIM technology. It discusses how early SIM cards were introduced in 2012 and included in smartphones starting in 2017. It then provides details on e-SIM technology, how it embeds the SIM card directly into devices rather than using removable plastic cards. The document outlines the key components of e-SIM including the embedded chip and over-the-air software updates that allow switching carriers without changing the physical SIM card. It discusses the benefits of e-SIM such as ease of use and size reduction compared to physical cards.
eSIM
The document discusses SIM cards and eSIM technology. It explains that SIM cards store user identity information to connect to mobile networks and have decreased in size over time. eSIM is an embedded SIM that is soldered directly onto a device's motherboard, allowing users to easily change carriers without inserting a new SIM card. While eSIM provides benefits like multi-carrier support and improved water resistance, it also has disadvantages such as inability to retrieve data if the device breaks and lack of interchangeability between devices. The document outlines how eSIM works by uploading a profile after scanning a QR code.
Beginners: UICC & SIM
This basic presentation / video looks at SIM (Subscriber Identity Module) card, its evolution and what is the relation between SIM and UICC (Universal Integrated Circuit Card). It also explains different form factors like 2FF, 3FF, 4FF and MFF2 and UICC contents briefly.
Finally, we look at embedded SIM (eSIM), integrated SIM (iSIM), eUICC Profiles and profile switching via remote provisioning functions.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free TrainingVideos: https://www.3g4g.co.uk/Training/
Creating a smarter world with eSIM
This presentation shows you what exactly is an eSIM, what are the eSIM connectivity implementation barriers and how it can change our understanding of IoT. And what can you expect from IoT eSIM providers.
IoT eSIM Test Bed
The document discusses an IoT eSIM test bed for fast prototyping of IoT devices using GSMA eSIM. It provides an overview of the IoT market trends of growing connected devices and the dominance of eSIM. The test bed architecture includes IoT prototyping boards, a software radio, eSIM stacks in different form factors, and a GSMA subscription management platform connected to IoT clouds. It supports Local Provisioning Agent configurations and eSIM form factors to enable fast prototyping and deployment of IoT devices using eSIM.
Understanding Telecom SIM and USIM/ISIM for LTE
SIM cards have been witnessing increasing adoption with the growing use of smartphones and other devices requiring always-on connectivity. SIM cards represent a key platform for value added services and applications, and are a core element in providing interoperability among the telecom industry players while ensuring security and safe authentication.
Key Features:
Form factors: mini-SIM (2FF), micro-SIM (3FF) and nano-SIM (4FF)
Memory size: from 32k up to 256k
High security standards and strong authentication algorithms
Over-The-Air (OTA) content management
Wide range of Value Added Services applications
IMS IP multimedia subsystem presentation
The document provides an overview of the IP Multimedia Subsystem (IMS) architecture, protocols, and services. Key points include:
- IMS provides an integrated architecture for multimedia services over different access networks through the use of IP.
- It allows for person-to-person and person-to-content communications using voice, text, pictures and video on both wireless and fixed networks.
- The IMS architecture includes the Call Session Control Function (CSCF), Home Subscriber Services (HSS), Application Servers, and other network elements that provide services like authentication, authorization, charging and quality of service.
- IMS supports multimedia applications and services like presence, instant messaging, push-
Smart card technology
Smart card technology allows for pocket-sized cards with embedded integrated circuits that can store information and process data. Smart cards can store thousands of times more data than magnetic stripe cards. They have a variety of applications including identification cards, payment cards, SIM cards, and more. Smart cards provide security through authentication methods like passwords, biometrics, and encryption of stored data. The document discusses the history of smart cards and their components, construction, types, uses, and future applications.
Architecture of 5G technology
5G wireless technology and advantages of 5g over 4g and advanced wireless communication ppt and mobile networking ppt slides
Subscriber Identity Module
This document discusses the subscriber identity module (SIM) card, including its history, types, construction, and uses in mobile communication. The SIM card identifies subscribers on mobile networks and stores data like contacts and text messages. SIM cards come in different sizes depending on the connection type and mobile device, including full size, mini, micro, and nano SIMs. They contain a SIM chip that operates between 1.8 and 5 volts and includes memory components like ROM, RAM, and EPROM. SIM cards are used in GSM communication networks to enable functions like calling, texting, and data use on mobile devices.
Why esim required for ais 140
AIS 140 provides standardization for intelligent transportation systems in India to improve safety and security. eSIM is required to comply with AIS 140 standards because it allows for easy programming of mobile devices and trackers used in transportation networks. eSIM makes devices smaller and more economical since they don't require a SIM slot, and provides greater security since the SIM cannot be tampered with. eSIM also enables the use of multiple SIMs in a single device to support different tracking and monitoring functions. This allows transportation to be more flexible, personalized and securely connected across different modes of transport.
SIM Card Overview
This presentation covers What is a SIM Card?, SIM standards, some industry numbers, Java Card, Smartcard Web Server, Gemalto.
IMS presentation
IMS is an architectural framework that uses SIP to deliver IP multimedia services to mobile users. It consists of common core elements, enablers, and support systems arranged in three layers. The control layer contains various nodes that handle signaling and session management, including the P-CSCF for access, I-CSCF for routing, and S-CSCF for authentication and services. Together these elements establish and manage multimedia sessions between IMS subscribers and networks.
Should we stop the shutdown of 2G/3G to save lives??
A lack of VoLTE standardisation breaks voice calling globally
Presented on 29 April 2022 by Rudolf van der Berg
*** SHARED WITH PERMISSION ***
SIM Initialization
The document discusses the Answer to Reset (ATR) from a UICC card during initialization. The ATR provides information about the card's capabilities and requirements for communication. It consists of start characters followed by optional interface and historical characters, and a check character. The ATR puts the card in specific or negotiable mode depending on the presence of an interface character TA2. It also discusses the optional PPS procedure for negotiating transmission speeds between the mobile equipment and UICC card.
Modern trends in mobile communication
The document discusses wireless communication technologies and networks. It provides an overview of the evolution of wireless systems from 1G to 5G, describing their key characteristics and standards. It also discusses different types of wireless networks including wireless PAN, LAN, MAN and WAN. Finally, it provides some details on communication technologies and internet usage statistics in India.
Broadcom AFEM-8072 – Mid and High Band LTE RF Front-End Module (FEM) - teardo...
The first mid/high band Long Term Evolution (LTE) Radio Frequency (RF) FEM in the Apple iPhone X integrates the latest generation of Film Bulk Acoustic Resonator (FBAR) technology with advanced and innovative packaging.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8072-mid-and-high-band-lte-rf-front-end-module-fem/
Generation of mobile
1. The document discusses the evolution of wireless mobile communication networks from 1G to 5G.
2. 1G networks were the first generation of analog cellular networks introduced in the 1980s. They supported only voice calls with speeds up to 2.4 kbps.
3. 2G networks introduced digital cellular technology in the late 1980s, allowing for improved voice quality, data services like texting, and more efficient use of spectrum. GSM became the dominant 2G standard globally.
Designing 5G NR (New Radio)
What is 5G NR all about? Check out this presentation to see all the key design components of this new unifying air interface for the next decade and beyond.
Presentation SIM CARD (GSM)
This document provides an overview of GSM Subscriber Identity Module (SIM) cards, including:
1. The SIM card has evolved over time, shrinking from its original 1FF size to the current nano SIM size of 4FF.
2. The SIM holds information to identify a mobile subscription and acts as the "key" for the subscriber to access the mobile network.
3. The SIM contains components like a CPU, ROM, RAM and EEPROM that allow it to perform functions like access control, customization, service personalization and more.
SMART CARDS
This document provides an overview of smart cards, including their history and uses. It discusses how smart cards ease logistical issues for wireless carriers by storing subscription information externally on the card rather than internally on the device. This allows users to easily personalize and depersonalize devices and supports a global distribution network. Smart cards also provide opportunities for value-added services, enhancing security and creating switching costs for users. Various industries and applications are exploring uses of smart cards, with financial services being an early adopter. Overall smart cards provide secure authentication and a platform for new services in wireless and other industries.
IMS Presentation
IMS is an architecture that enables operators to offer advanced multimedia services across circuit-switched and packet-switched networks using SIP for call signaling. It provides a layered approach separating the services, control, and transport planes. 3GPP has specified and enhanced IMS in successive releases to support additional networks and services. IMS allows for convergent applications across networks using common resources and control through SIP. This provides a consistent experience to subscribers regardless of access network.
Telecom Convergence
This reoprt covers the different flavors of convergence,analysis of global players,vendor analysis as well as consumer survey
What is Matroska?
Matroska is a multimedia container format based on EBML that can contain multiple audio, video, and subtitle streams. It defines elements like Segment, SeekHead, Info, Tracks, Cluster, Cues, Attachments and Tags that provide structure and metadata for playback. Codec Mappings are used to identify and describe the encoding of data within each track. A sample Matroska file is analyzed to demonstrate these elements.
SIPREC RTPEngine Media Forking
Overview of SIPREC architecture and Media Forking in RTPEngine and how we can use it in OpenSIPS sip proxy server.
More Related Content
What's hot
Creating a smarter world with eSIM
This presentation shows you what exactly is an eSIM, what are the eSIM connectivity implementation barriers and how it can change our understanding of IoT. And what can you expect from IoT eSIM providers.
IoT eSIM Test Bed
The document discusses an IoT eSIM test bed for fast prototyping of IoT devices using GSMA eSIM. It provides an overview of the IoT market trends of growing connected devices and the dominance of eSIM. The test bed architecture includes IoT prototyping boards, a software radio, eSIM stacks in different form factors, and a GSMA subscription management platform connected to IoT clouds. It supports Local Provisioning Agent configurations and eSIM form factors to enable fast prototyping and deployment of IoT devices using eSIM.
Understanding Telecom SIM and USIM/ISIM for LTE
SIM cards have been witnessing increasing adoption with the growing use of smartphones and other devices requiring always-on connectivity. SIM cards represent a key platform for value added services and applications, and are a core element in providing interoperability among the telecom industry players while ensuring security and safe authentication.
Key Features:
Form factors: mini-SIM (2FF), micro-SIM (3FF) and nano-SIM (4FF)
Memory size: from 32k up to 256k
High security standards and strong authentication algorithms
Over-The-Air (OTA) content management
Wide range of Value Added Services applications
IMS IP multimedia subsystem presentation
The document provides an overview of the IP Multimedia Subsystem (IMS) architecture, protocols, and services. Key points include:
- IMS provides an integrated architecture for multimedia services over different access networks through the use of IP.
- It allows for person-to-person and person-to-content communications using voice, text, pictures and video on both wireless and fixed networks.
- The IMS architecture includes the Call Session Control Function (CSCF), Home Subscriber Services (HSS), Application Servers, and other network elements that provide services like authentication, authorization, charging and quality of service.
- IMS supports multimedia applications and services like presence, instant messaging, push-
Smart card technology
Smart card technology allows for pocket-sized cards with embedded integrated circuits that can store information and process data. Smart cards can store thousands of times more data than magnetic stripe cards. They have a variety of applications including identification cards, payment cards, SIM cards, and more. Smart cards provide security through authentication methods like passwords, biometrics, and encryption of stored data. The document discusses the history of smart cards and their components, construction, types, uses, and future applications.
Architecture of 5G technology
5G wireless technology and advantages of 5g over 4g and advanced wireless communication ppt and mobile networking ppt slides
Subscriber Identity Module
This document discusses the subscriber identity module (SIM) card, including its history, types, construction, and uses in mobile communication. The SIM card identifies subscribers on mobile networks and stores data like contacts and text messages. SIM cards come in different sizes depending on the connection type and mobile device, including full size, mini, micro, and nano SIMs. They contain a SIM chip that operates between 1.8 and 5 volts and includes memory components like ROM, RAM, and EPROM. SIM cards are used in GSM communication networks to enable functions like calling, texting, and data use on mobile devices.
Why esim required for ais 140
AIS 140 provides standardization for intelligent transportation systems in India to improve safety and security. eSIM is required to comply with AIS 140 standards because it allows for easy programming of mobile devices and trackers used in transportation networks. eSIM makes devices smaller and more economical since they don't require a SIM slot, and provides greater security since the SIM cannot be tampered with. eSIM also enables the use of multiple SIMs in a single device to support different tracking and monitoring functions. This allows transportation to be more flexible, personalized and securely connected across different modes of transport.
SIM Card Overview
This presentation covers What is a SIM Card?, SIM standards, some industry numbers, Java Card, Smartcard Web Server, Gemalto.
IMS presentation
IMS is an architectural framework that uses SIP to deliver IP multimedia services to mobile users. It consists of common core elements, enablers, and support systems arranged in three layers. The control layer contains various nodes that handle signaling and session management, including the P-CSCF for access, I-CSCF for routing, and S-CSCF for authentication and services. Together these elements establish and manage multimedia sessions between IMS subscribers and networks.
Should we stop the shutdown of 2G/3G to save lives??
A lack of VoLTE standardisation breaks voice calling globally
Presented on 29 April 2022 by Rudolf van der Berg
*** SHARED WITH PERMISSION ***
SIM Initialization
The document discusses the Answer to Reset (ATR) from a UICC card during initialization. The ATR provides information about the card's capabilities and requirements for communication. It consists of start characters followed by optional interface and historical characters, and a check character. The ATR puts the card in specific or negotiable mode depending on the presence of an interface character TA2. It also discusses the optional PPS procedure for negotiating transmission speeds between the mobile equipment and UICC card.
Modern trends in mobile communication
The document discusses wireless communication technologies and networks. It provides an overview of the evolution of wireless systems from 1G to 5G, describing their key characteristics and standards. It also discusses different types of wireless networks including wireless PAN, LAN, MAN and WAN. Finally, it provides some details on communication technologies and internet usage statistics in India.
Broadcom AFEM-8072 – Mid and High Band LTE RF Front-End Module (FEM) - teardo...
The first mid/high band Long Term Evolution (LTE) Radio Frequency (RF) FEM in the Apple iPhone X integrates the latest generation of Film Bulk Acoustic Resonator (FBAR) technology with advanced and innovative packaging.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/broadcom-afem-8072-mid-and-high-band-lte-rf-front-end-module-fem/
Generation of mobile
1. The document discusses the evolution of wireless mobile communication networks from 1G to 5G.
2. 1G networks were the first generation of analog cellular networks introduced in the 1980s. They supported only voice calls with speeds up to 2.4 kbps.
3. 2G networks introduced digital cellular technology in the late 1980s, allowing for improved voice quality, data services like texting, and more efficient use of spectrum. GSM became the dominant 2G standard globally.
Designing 5G NR (New Radio)
What is 5G NR all about? Check out this presentation to see all the key design components of this new unifying air interface for the next decade and beyond.
Presentation SIM CARD (GSM)
This document provides an overview of GSM Subscriber Identity Module (SIM) cards, including:
1. The SIM card has evolved over time, shrinking from its original 1FF size to the current nano SIM size of 4FF.
2. The SIM holds information to identify a mobile subscription and acts as the "key" for the subscriber to access the mobile network.
3. The SIM contains components like a CPU, ROM, RAM and EEPROM that allow it to perform functions like access control, customization, service personalization and more.
SMART CARDS
This document provides an overview of smart cards, including their history and uses. It discusses how smart cards ease logistical issues for wireless carriers by storing subscription information externally on the card rather than internally on the device. This allows users to easily personalize and depersonalize devices and supports a global distribution network. Smart cards also provide opportunities for value-added services, enhancing security and creating switching costs for users. Various industries and applications are exploring uses of smart cards, with financial services being an early adopter. Overall smart cards provide secure authentication and a platform for new services in wireless and other industries.
IMS Presentation
IMS is an architecture that enables operators to offer advanced multimedia services across circuit-switched and packet-switched networks using SIP for call signaling. It provides a layered approach separating the services, control, and transport planes. 3GPP has specified and enhanced IMS in successive releases to support additional networks and services. IMS allows for convergent applications across networks using common resources and control through SIP. This provides a consistent experience to subscribers regardless of access network.
Telecom Convergence
This reoprt covers the different flavors of convergence,analysis of global players,vendor analysis as well as consumer survey
What's hot (20)
Should we stop the shutdown of 2G/3G to save lives??
Should we stop the shutdown of 2G/3G to save lives??
Broadcom AFEM-8072 – Mid and High Band LTE RF Front-End Module (FEM) - teardo...
Broadcom AFEM-8072 – Mid and High Band LTE RF Front-End Module (FEM) - teardo...
More from Hossein Yavari
What is Matroska?
Matroska is a multimedia container format based on EBML that can contain multiple audio, video, and subtitle streams. It defines elements like Segment, SeekHead, Info, Tracks, Cluster, Cues, Attachments and Tags that provide structure and metadata for playback. Codec Mappings are used to identify and describe the encoding of data within each track. A sample Matroska file is analyzed to demonstrate these elements.
SIPREC RTPEngine Media Forking
Overview of SIPREC architecture and Media Forking in RTPEngine and how we can use it in OpenSIPS sip proxy server.
Windows Forensics
OS Forensics is one of the categories in digital forensics. As MS Windows is the most popular OS in the world, we focus on Windows forensics and some important methods in this presentation.
SIP over TLS
This document discusses SIP over TLS. It describes how SIP signaling can be secured using TLS instead of UDP or TCP. The TLS handshake process is explained in detail including the messages exchanged between the client and server. It also discusses how media can be encrypted using SRTP and the different key management protocols that can be used like SDES, DTLS, and ZRTP. Sample packet captures of SIP over TLS calls are also provided.
Desjardins Data Breach
An employee at Desjardins Group, the largest federation of credit unions in North America, exfiltrated personal information of 9.7 million individuals over 26 months from 2017-2019. The employee sold this information to private lenders. A data breach was discovered in May 2019 that compromised names, addresses, social insurance numbers, and transaction histories. Desjardins Group faces lawsuits and has spent $108 million in response, including credit monitoring and compensation. The breach occurred because marketing employees could download personal information from company data warehouses to shared drives.
Introduction to Metasploit
Metasploit is an open-source penetration testing framework that allows users to find, exploit, and validate vulnerabilities. It was originally developed in 2003 as a Perl-based tool and was later rewritten in Ruby. Metasploit includes both commercial and open-source platforms and provides libraries, modules, and interfaces to aid in penetration testing workflows.
Which IT Certification is Better for You?
This document discusses various IT certifications and which ones are better suited for different IT roles. It recommends getting CompTIA certifications as they are core certifications for any IT role. It also provides certification roadmaps for roles like security expert, network administration, DevOps, and project management. The document advises focusing on your career and adding some certifications relevant to your role as it is not possible to get all certifications.
Disassembly Using IDA
This document defines and compares disassemblers, debuggers, and decompilers. It then discusses the IDA Pro tool in more detail. A disassembler translates machine code back to assembly code, enabling static code analysis. A debugger also disassembles code but allows controlled execution and dynamic analysis. A decompiler translates machine code into high-level code. The document recommends IDA Pro as a powerful disassembler and debugger that has become a standard for reverse engineering. It also briefly mentions the open-source x64dbg debugger as an alternative.
Introduction to Snort
Snort is an open-source network intrusion detection and prevention system that performs real-time traffic analysis and packet logging on IP networks. It can detect a variety of attacks through protocol analysis, content searching, and matching. Snort functions in sniffer, packet logger, and intrusion detection modes. As a network intrusion detection system, it monitors network traffic and compares it to a database of attack signatures. Snort rules are used to detect suspicious activity and are organized into categories covering web, SQL, shellcode attacks and more.
DLL Injection
This document discusses static and dynamic linking of libraries in Windows. It explains how dynamic linking loads libraries into memory alongside applications rather than copying code into each executable. It then covers dynamic link libraries (DLLs) and how their exported functions can be accessed via name or index number. The document focuses on DLL injection techniques used by malware to manipulate process execution, including loading a malicious DLL via the LoadLibrary and GetProcAddress APIs or modifying registry entries.
SQL Injection in JAVA
This document discusses SQL injection in Java applications. It defines SQL injection as a vulnerability that allows attackers to hijack databases. The document covers different types of SQL injections like boolean-based, union-based, time-based, and error-based injections. It provides examples of SQL injection vulnerabilities in Java code and how to prevent them by using prepared statements with parameterized queries, stored procedures, input validation, escaping user input, enforcing least privilege, and using tools to detect vulnerabilities.
Malware Static Analysis
This document discusses techniques for analyzing malware samples without executing them. It covers static analysis methods like identifying the file type and architecture, fingerprinting with hashes, scanning for known signatures, extracting strings, analyzing the PE header, and comparing samples. The goal of static analysis is to learn as much as possible about the malware before executing it, in order to focus subsequent dynamic analysis efforts. Manual and automated tools are described throughout for performing static analysis tasks like string extraction, unpacking obfuscated files, and classifying samples.
Creativity and Role of the Leaders
Steve Jobs visited Xerox PARC in 1979 and was inspired by the graphical user interface (GUI) he saw, including the mouse. However, he wanted to create something appropriate for mass audiences rather than just reproduce what was seen. Creativity involves generating something new and valuable. Creative leadership combines leadership and creativity to inspire and implement imaginative solutions. Effective creative leaders engage diverse teams, encourage collaboration, provide intellectual challenges to motivate intrinsic motivation, and embrace failures as learning opportunities.
IPsec for IMS
IPsec for IMS provides a concise overview of IPsec (Internet Protocol Security) and how it is used in the IMS (IP Multimedia Subsystem). The document defines IPsec as a set of security protocols that secure IP data at the network layer by providing data confidentiality, integrity, and authentication. It describes the main IPsec components and protocols including IKE (Internet Key Exchange) and ESP (Encapsulating Security Payload). The document then summarizes how IPsec establishes secure tunnels between network devices using IKE phase 1 and phase 2 negotiations. Finally, it outlines how IPsec ESP is used to provide confidentiality for SIP signaling between the UE (User Equipment) and P-CSCF (Proxy-Call
Yeastar Technical Training Course
You would learn to install and configure Yeastar s series IP-PBX in this training course.
This training is based on YSCT.
www.senatelecom.com
SENA Cloud UC
Sena cloud UC is a solution for customers and also service providers that makes everything they need for their businesses as a service through the cloud. Let's know more about it.
www.senatelecom.com
FreePBX Disaster Recovery
Telephony System is very important for all businesses today, and they try to keep it on service because of huge Impacts when are hit.
We are going to introduce some solutions for DR planing.
www.senatelecom.com
LTE Architecture Overview
We are going to introduce the 4G/LTE mobile network architecture. We focused on LTE network elements and reviewed the spec.
www.senatelecom.com
Introduction to DIAMETER
Diameter is an authentication, authorization, and accounting (AAA) protocol that was developed as a successor to RADIUS. Some key points:
- Diameter was developed to address limitations in RADIUS such as reliability, security, failover support, and extensibility.
- It uses TCP or SCTP for reliable transport and supports features like transport layer security, failover mechanisms, and more flexible extensions compared to RADIUS.
- Diameter is composed of a base protocol and applications that allow it to be extended for different services. The base protocol specifies the message format, transport, and peer connections while applications define additional messages and service logic.
Introduction to SS7- Part 2
Signaling System No. 7 (SS7) is a set of telephony signaling protocols developed in 1975, which is used to set up and tear down most of the world's public switched telephone network (PSTN) telephone calls.
We are going to introduce it very quickly.
www.senatelecom.com
More from Hossein Yavari (20)
Recently uploaded
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
eSIM Overview
- 2. Telecom Solutions Provider Since 2005 2
- 3. SIM Functions 3 • SIM is responsible for: – Connection between mobile device and provider – Storage (IMSI, Network data, Encryption data and etc.)
- 4. SIM Card Evolution 4 Embedded SIM: eSIM or eUICC
- 5. eSIM Key Characteristics 5 • eSIM is: – hardware based – Non-removable • Remote Provisioning: SIM profile is transferred over the air (OTA) to the device • eSIM provides easier switch between operators
- 7. eSIM Key Characteristics (Cont.) 7 • Improvement in customer experience
- 9. Use Cases 9