Energy in industry and living things
•Download as PPTX, PDF•
1 like•2,000 views
The document outlines nine main types of energy: kinetic, heat, electrical, potential, light, nuclear, radiation, chemical, and solar. It then provides further details on fossil fuels including types of coal and the petroleum refining process. The document also discusses biomass/renewable energy sources and classification of organic compounds including hydrocarbons such as alkanes, cycloalkanes, alkenes, alkynes, and aromatic hydrocarbons.
Report
Share
Report
Share
Recommended
Molecular Biology: Principles and Practice by Michael M. Cox
Michael M. Cox authored the book "Molecular Biology: Principles and Practice" published in 2015 by WH Freeman, containing 944 pages. The book provides an overview of molecular biology, covering principles and practices, for an English-speaking audience. It includes details such as the author, publisher, publication date, page count, language and ISBN numbers.
Science 7.3-Nuclear Reactions
Nuclear fission is the splitting of a heavy nucleus into lighter nuclei and is accompanied by a large release of energy. It can occur through a chain reaction where one fission reaction causes additional reactions. Nuclear fusion is the process where two light nuclei fuse to form a heavier nucleus and occurs at extremely high temperatures like in the core of the sun. CANDU reactors are Canadian nuclear reactors that use deuterium and uranium in induced nuclear reactions.
Nuclear Power
The Chernobyl nuclear disaster of 1986 in Ukraine spread radioactive particles across Europe after explosions destroyed the Number 4 reactor. While nuclear power provides a potential clean energy source, the Catholic Church opposes uranium mining and nuclear weapons due to risks of accidents, misuse for warfare, and religious teachings promoting peace. Proponents argue that nuclear power is efficient and emits no greenhouse gases, but critics note higher accident risks with understaffed plants and question dual military-energy uses of the technology.
Nuclear Power
case study of the Nuclear energy which includes working of nuclear reactor, advantages and disadvantages , statistics , the three disasters of nuclear power plant and the future of nuclear energy in India.
Formation of Elements in the Big Bang and Stellar Evolution
The document discusses the formation of elements in the big bang and stellar evolution. It explains that during the big bang, light elements such as hydrogen, helium, and lithium were formed through nuclear fusion reactions. Heavier elements were later produced during stellar nucleosynthesis inside stars through nuclear fusion reactions like the carbon-nitrogen-oxygen cycle and triple alpha process. Supernovae explosions further contributed to the production of heavier elements that were then dispersed throughout the universe.
Ch 1,2 collision phenomenon bijay basnet (Devid Peter)
The document presents information on collision phenomena and excitation and ionization processes in plasmas. It discusses various types of collisions including elastic and inelastic collisions. It also describes different ionization processes such as excitation and ionization by electron collisions, thermal ionization, Penning ionization, and photoionization. Processes of ion-ion and ion-electron recombination like radiative and dielectronic recombination are also summarized. The presentation contains diagrams and equations to illustrate key concepts and is intended to provide an overview of these plasma phenomena.
Electronegativity for upload
Linus Pauling, a Nobel Prize-winning American chemist, developed the concept of electronegativity in 1932 to explain the nature of chemical bonds. Electronegativity refers to an atom's ability to attract electrons in a covalent bond. Electronegativity generally increases when moving left to right across a period in the periodic table and decreases when moving down a group, as shown in a diagram of electronegativity trends. The document provides a brief overview of the history and definition of electronegativity and illustrates its trend in the periodic table.
Formation of Light Elements.
1. The document summarizes the key stages of the Big Bang theory, including the formation of the early light elements hydrogen and helium.
2. It describes how in the early universe, matter and antimatter annihilated each other, leaving an excess of matter. Nuclear fusion then formed the first atomic nuclei like deuterium and helium-3.
3. Eventually, hydrogen and helium nuclei combined to form the first stable atomic element, helium-4, accounting for about 25% of the elemental abundance we observe today.
Recommended
Molecular Biology: Principles and Practice by Michael M. Cox
Michael M. Cox authored the book "Molecular Biology: Principles and Practice" published in 2015 by WH Freeman, containing 944 pages. The book provides an overview of molecular biology, covering principles and practices, for an English-speaking audience. It includes details such as the author, publisher, publication date, page count, language and ISBN numbers.
Science 7.3-Nuclear Reactions
Nuclear fission is the splitting of a heavy nucleus into lighter nuclei and is accompanied by a large release of energy. It can occur through a chain reaction where one fission reaction causes additional reactions. Nuclear fusion is the process where two light nuclei fuse to form a heavier nucleus and occurs at extremely high temperatures like in the core of the sun. CANDU reactors are Canadian nuclear reactors that use deuterium and uranium in induced nuclear reactions.
Nuclear Power
The Chernobyl nuclear disaster of 1986 in Ukraine spread radioactive particles across Europe after explosions destroyed the Number 4 reactor. While nuclear power provides a potential clean energy source, the Catholic Church opposes uranium mining and nuclear weapons due to risks of accidents, misuse for warfare, and religious teachings promoting peace. Proponents argue that nuclear power is efficient and emits no greenhouse gases, but critics note higher accident risks with understaffed plants and question dual military-energy uses of the technology.
Nuclear Power
case study of the Nuclear energy which includes working of nuclear reactor, advantages and disadvantages , statistics , the three disasters of nuclear power plant and the future of nuclear energy in India.
Formation of Elements in the Big Bang and Stellar Evolution
The document discusses the formation of elements in the big bang and stellar evolution. It explains that during the big bang, light elements such as hydrogen, helium, and lithium were formed through nuclear fusion reactions. Heavier elements were later produced during stellar nucleosynthesis inside stars through nuclear fusion reactions like the carbon-nitrogen-oxygen cycle and triple alpha process. Supernovae explosions further contributed to the production of heavier elements that were then dispersed throughout the universe.
Ch 1,2 collision phenomenon bijay basnet (Devid Peter)
The document presents information on collision phenomena and excitation and ionization processes in plasmas. It discusses various types of collisions including elastic and inelastic collisions. It also describes different ionization processes such as excitation and ionization by electron collisions, thermal ionization, Penning ionization, and photoionization. Processes of ion-ion and ion-electron recombination like radiative and dielectronic recombination are also summarized. The presentation contains diagrams and equations to illustrate key concepts and is intended to provide an overview of these plasma phenomena.
Electronegativity for upload
Linus Pauling, a Nobel Prize-winning American chemist, developed the concept of electronegativity in 1932 to explain the nature of chemical bonds. Electronegativity refers to an atom's ability to attract electrons in a covalent bond. Electronegativity generally increases when moving left to right across a period in the periodic table and decreases when moving down a group, as shown in a diagram of electronegativity trends. The document provides a brief overview of the history and definition of electronegativity and illustrates its trend in the periodic table.
Formation of Light Elements.
1. The document summarizes the key stages of the Big Bang theory, including the formation of the early light elements hydrogen and helium.
2. It describes how in the early universe, matter and antimatter annihilated each other, leaving an excess of matter. Nuclear fusion then formed the first atomic nuclei like deuterium and helium-3.
3. Eventually, hydrogen and helium nuclei combined to form the first stable atomic element, helium-4, accounting for about 25% of the elemental abundance we observe today.
Conformational analysis
This document discusses the conformations of cyclobutane. It notes that cyclobutane has a four-membered ring structure with bond angles of 90 degrees rather than the expected 109.5 degrees, resulting in 26.3 kcal/mol of strain energy. The document describes how cyclobutane can adopt puckered conformations to reduce torsional strain and buckle into a butterfly shape in 3D to further relieve strain. Cyclobutane can also undergo ring inversion with a low barrier of 1.45 kcal/mol by passing through a transition state with a planar ring structure. Different conformations of cyclobutane, including eclipsed and staggered, are represented
Activity 1. in the beginning
The document provides information about an activity to teach students about the Big Bang theory. The activity involves ordering events in the Big Bang chronologically and observing stickers on an inflating balloon to model the expansion of the early universe. Students are asked to explain that in the Big Bang: 1) space itself expanded, carrying matter with it and increasing distances between objects; 2) the stickers are not moving across the balloon's surface but rather space itself is expanding between them; and 3) the activity models how the early universe rapidly expanded after the initial singularity.
Energy unit review
The document is an energy unit review with questions about different forms of energy and energy conversions. It contains 18 multiple choice questions about topics like: electrical energy from moving electrons; sound energy from object vibrations; mechanical energy from movement; heat energy from moving atoms; chemical energy stored in molecule bonds; and energy conversions in machines from mechanical to heat energy. The review is intended to test understanding of key energy concepts using a clicker response system.
Chapter 32 Powerpoint
The document discusses different types of nuclear reactions including induced nuclear reactions, nuclear fission, nuclear reactors, and nuclear fusion. It provides examples of an alpha particle striking an aluminum nucleus and producing another nucleus and neutron in an induced reaction. It also describes how uranium can undergo fission from a slow neutron to produce barium, krypton, and three neutrons, and how a controlled chain reaction allows only one neutron on average to cause further fission. Nuclear reactors are described as consisting of fuel elements, control rods, and a moderator to slow neutrons while control rods absorb neutrons. Nuclear fusion is defined as the combination of very low mass nuclei to generate energy.
Delivering Science by means of English and using Mathematics.
This is a presentation which I prepared and presented on the PDT of the School where I am the Head of the Department of Physics
Jan8 2014 CHEM 121 Lecture Dominican University Wanda Oehrli
This document provides an overview of CHEM 121 General Chemistry II taught by Dr. Wanda Oehrli. It includes the course agenda for the day which is introductions, starting Chapter 11 on intermolecular forces, and reviewing the syllabus. Dr. Oehrli's background is also summarized, including her education in chemistry and work experience in areas like biopharmaceutical development and teaching. Information about office hours, an upcoming reading assignment on intermolecular forces, and the start of the general chemistry lab is also presented.
Bo:energy
The document discusses different types of energy, properties, and heat transfer. It defines potential energy as stored energy and kinetic energy as energy in use. Chemical properties like flammability involve irreversible changes, while physical properties refer to reversible changes like breaking or melting. Heat transfers through conduction between substances in direct contact, radiation through rays or waves, and convection through fluids by molecular motion.
Lesson 1. 8 important concepts
This document outlines 8 important concepts about atoms, elements, and the formation of the universe. It discusses that all atoms are made up of subatomic particles, an element's identity depends on its number of protons, and the very first elements formed were hydrogen, helium, lithium, and beryllium. It also explains that nucleosynthesis combines nucleons to form new elements, the big bang was an expansion of the universe that caused it to cool over time, and that mass can be converted into energy according to concepts about temperature and particle energy levels.
Nuclear Chemistry: Nuclear fission
This document discusses nuclear fission, which involves changes in nuclear composition and releases tremendous energy. Nuclear fission occurs when a large nucleus is bombarded by a small particle, causing the nucleus to split into smaller nuclei and neutrons. Some elements can undergo fission spontaneously, while others require bombardment by neutrons to induce fission. When Uranium-235 is bombarded by a neutron, it forms an unstable Uranium-236 nucleus that undergoes fission, splitting into smaller nuclei like Krypton-91 and Barium-142 along with additional neutrons. A chain reaction can occur when a critical mass of uranium undergoes fission, releasing heat and energy in an atomic explosion. Nuclear power
Cell Function
The document discusses different types of transport in cells, including passive transport through diffusion and osmosis, and active transport which requires energy. It also describes photosynthesis, which uses energy from sunlight to convert carbon dioxide and water into glucose and oxygen in plants. The glucose is then broken down through cellular respiration to release energy in cells.
Activity 3 NUCLEOSYNTHESIS
Stellar nucleosynthesis and supernova nucleosynthesis produce heavier elements through nuclear fusion reactions. During the main sequence, hydrogen fuses in the proton-proton chain reaction or CNO cycle in stars. In red giant and supergiant stars, helium fuses through the triple-alpha process and alpha ladder. Supernova explosions produce very heavy elements through the rapid r-process. The slower s-process in massive stars also produces heavier elements than iron.
The atom
1. The document discusses topics in atom physics including light as waves and particles, the photoelectric effect, electron energy levels, and laser technology.
2. Specific examples covered include the hydrogen Balmer series, mercury and cadmium vapor spectra, fluorescence, phosphorescence, neon signs, fluorescent lights, and helium-neon lasers.
3. The document provides diagrams of electron energy levels, laser operation, and spectra of lasers and LEDs.
Fission and fusion
This document discusses nuclear fission and fusion. It describes how fission occurs when a large nucleus splits into two smaller nuclei along with neutrons. Fission can be spontaneous or induced by neutron bombardment. Induced fission involves bombarding atoms with neutrons which causes the nuclei to split. The document also explains nuclear fusion, where two low mass nuclei combine to form a heavier nucleus along with energy release. Fusion occurs through the combining of hydrogen isotopes to form helium. Both fission and fusion result in the release of kinetic energy greater than the initial particles.
Fission and fusion
The document discusses nuclear fission and fusion. Nuclear fission occurs when a nucleus splits into two smaller nuclei and releases neutrons. There are two types of fission: spontaneous fission of unstable radioactive isotopes and induced fission which is caused by bombarding atoms with neutrons. Nuclear fusion occurs when two low mass nuclei combine to form a higher mass nucleus and release energy. Fusion takes place in stars and involves hydrogen fusing to form helium.
Heavy elements
Heavy elements are elements with an atomic number greater than 92, with the first being neptunium. Superheavy elements have an atomic number greater than or equal to 112. New elements and isotopes are produced artificially using techniques like heavy ion transfer reactions in cyclotrons or particle accelerators. Discovering new superheavy elements helps prove nuclear theories and increases understanding of how nuclei are structured and resist fission. Potential applications of these unstable, radioactive elements are still unknown but may be discovered in the future.
Nuclear power 4th class
Nuclear power generates electricity through fission, which is the splitting of atoms to release energy. It produces no air pollution since it does not burn fuel like coal plants. While risks exist such as potential meltdowns, nuclear power is a clean and safe alternative that provides a significant portion of the world's energy needs. It has also been used to develop nuclear weapons, though the technology was originally developed in the early 20th century by German scientists.
Nuclear power resources in pakistan
This document discusses nuclear energy in Pakistan. It provides information on how nuclear energy works through atomic fission and how nuclear power plants produce energy similarly to fossil fuel plants by using heat to create steam to power turbines. The document also lists the existing nuclear power plants in Pakistan as Chasma Nuclear Power Plant and Karachi Nuclear Power Plant, and discusses an expert urging Pakistan to develop its peaceful nuclear program and export nuclear technology and expertise.
Matter and materials (II) Paticles that substances are made up of
Particles that substances are made up of can be atoms, molecules, or ions. Atoms are the basic building blocks of matter that combine to form elements or compounds. Elements are either monoatomic like hydrogen gas or diatomic like oxygen gas. Compounds contain two or more different elements combined in fixed proportions. The molecular, empirical, and structural formulas are used to represent compounds. Substances can have covalent, ionic, or metallic bonding that results in different macroscopic properties. Chemical and physical changes can be distinguished based on whether atoms are rearranged. Chemical reactions involve energy absorption or release as bonds are broken and formed.
Nuclear fusion presentation (general)
This is frontier research of physics specified in basic energy of physics..
hope it will be helpful for you in future lillah!
Energy. diagram
Energy is defined as the ability to do work. There are several forms of energy including mechanical, chemical, thermal, nuclear, electrical, light, and sound. Mechanical energy can be either potential or kinetic depending on position or movement. Chemical energy involves the transformation of substances releasing light, heat, etc. Thermal energy comes from atomic vibrations that produce heat. Nuclear energy involves reactions inside atoms like uranium. Electrical energy is the flow of electrons. Light is a form of radiation. Sound is made of vibrations. Energy sources are grouped into non-renewable like coal, petroleum, and natural gas, and renewable like hydropower.
Nuclear energy PPT
This document provides an overview of nuclear energy written by Anubhav Kumar Lath for class 8. It defines nuclear energy as energy generated from nuclear reactions that change the nucleus of an atom. There are two ways to obtain nuclear energy: nuclear fission and nuclear fusion. Nuclear fission involves splitting heavy radioactive nuclei like uranium and generates large amounts of heat. Nuclear fusion combines light elements and occurs as the energy source of the sun. The document discusses advantages and disadvantages of nuclear energy as well as countries that use it and the risks involved.
Origin of life
The early Earth formed 4.6 billion years ago from dust swirling around the sun. By 4.2 billion years ago, the Earth had cooled enough for oceans to form, creating a chemical soup atmosphere containing nitrogen, oxygen, carbon dioxide, and water vapor. Experiments in the 1950s by Stanley Miller successfully produced amino acids by sparking a chamber simulating the early Earth's atmosphere, supporting the hypothesis that life began through natural chemical reactions. Other theories suggest life began at hydrothermal vents or through chemical reactions on clay surfaces. Over time, RNA chunks accumulated on clay and began replicating. Once RNA coded for proteins, lipids formed cell membranes, creating the first protocells around 3.85 billion years ago.
More Related Content
What's hot
Conformational analysis
This document discusses the conformations of cyclobutane. It notes that cyclobutane has a four-membered ring structure with bond angles of 90 degrees rather than the expected 109.5 degrees, resulting in 26.3 kcal/mol of strain energy. The document describes how cyclobutane can adopt puckered conformations to reduce torsional strain and buckle into a butterfly shape in 3D to further relieve strain. Cyclobutane can also undergo ring inversion with a low barrier of 1.45 kcal/mol by passing through a transition state with a planar ring structure. Different conformations of cyclobutane, including eclipsed and staggered, are represented
Activity 1. in the beginning
The document provides information about an activity to teach students about the Big Bang theory. The activity involves ordering events in the Big Bang chronologically and observing stickers on an inflating balloon to model the expansion of the early universe. Students are asked to explain that in the Big Bang: 1) space itself expanded, carrying matter with it and increasing distances between objects; 2) the stickers are not moving across the balloon's surface but rather space itself is expanding between them; and 3) the activity models how the early universe rapidly expanded after the initial singularity.
Energy unit review
The document is an energy unit review with questions about different forms of energy and energy conversions. It contains 18 multiple choice questions about topics like: electrical energy from moving electrons; sound energy from object vibrations; mechanical energy from movement; heat energy from moving atoms; chemical energy stored in molecule bonds; and energy conversions in machines from mechanical to heat energy. The review is intended to test understanding of key energy concepts using a clicker response system.
Chapter 32 Powerpoint
The document discusses different types of nuclear reactions including induced nuclear reactions, nuclear fission, nuclear reactors, and nuclear fusion. It provides examples of an alpha particle striking an aluminum nucleus and producing another nucleus and neutron in an induced reaction. It also describes how uranium can undergo fission from a slow neutron to produce barium, krypton, and three neutrons, and how a controlled chain reaction allows only one neutron on average to cause further fission. Nuclear reactors are described as consisting of fuel elements, control rods, and a moderator to slow neutrons while control rods absorb neutrons. Nuclear fusion is defined as the combination of very low mass nuclei to generate energy.
Delivering Science by means of English and using Mathematics.
This is a presentation which I prepared and presented on the PDT of the School where I am the Head of the Department of Physics
Jan8 2014 CHEM 121 Lecture Dominican University Wanda Oehrli
This document provides an overview of CHEM 121 General Chemistry II taught by Dr. Wanda Oehrli. It includes the course agenda for the day which is introductions, starting Chapter 11 on intermolecular forces, and reviewing the syllabus. Dr. Oehrli's background is also summarized, including her education in chemistry and work experience in areas like biopharmaceutical development and teaching. Information about office hours, an upcoming reading assignment on intermolecular forces, and the start of the general chemistry lab is also presented.
Bo:energy
The document discusses different types of energy, properties, and heat transfer. It defines potential energy as stored energy and kinetic energy as energy in use. Chemical properties like flammability involve irreversible changes, while physical properties refer to reversible changes like breaking or melting. Heat transfers through conduction between substances in direct contact, radiation through rays or waves, and convection through fluids by molecular motion.
Lesson 1. 8 important concepts
This document outlines 8 important concepts about atoms, elements, and the formation of the universe. It discusses that all atoms are made up of subatomic particles, an element's identity depends on its number of protons, and the very first elements formed were hydrogen, helium, lithium, and beryllium. It also explains that nucleosynthesis combines nucleons to form new elements, the big bang was an expansion of the universe that caused it to cool over time, and that mass can be converted into energy according to concepts about temperature and particle energy levels.
Nuclear Chemistry: Nuclear fission
This document discusses nuclear fission, which involves changes in nuclear composition and releases tremendous energy. Nuclear fission occurs when a large nucleus is bombarded by a small particle, causing the nucleus to split into smaller nuclei and neutrons. Some elements can undergo fission spontaneously, while others require bombardment by neutrons to induce fission. When Uranium-235 is bombarded by a neutron, it forms an unstable Uranium-236 nucleus that undergoes fission, splitting into smaller nuclei like Krypton-91 and Barium-142 along with additional neutrons. A chain reaction can occur when a critical mass of uranium undergoes fission, releasing heat and energy in an atomic explosion. Nuclear power
Cell Function
The document discusses different types of transport in cells, including passive transport through diffusion and osmosis, and active transport which requires energy. It also describes photosynthesis, which uses energy from sunlight to convert carbon dioxide and water into glucose and oxygen in plants. The glucose is then broken down through cellular respiration to release energy in cells.
Activity 3 NUCLEOSYNTHESIS
Stellar nucleosynthesis and supernova nucleosynthesis produce heavier elements through nuclear fusion reactions. During the main sequence, hydrogen fuses in the proton-proton chain reaction or CNO cycle in stars. In red giant and supergiant stars, helium fuses through the triple-alpha process and alpha ladder. Supernova explosions produce very heavy elements through the rapid r-process. The slower s-process in massive stars also produces heavier elements than iron.
The atom
1. The document discusses topics in atom physics including light as waves and particles, the photoelectric effect, electron energy levels, and laser technology.
2. Specific examples covered include the hydrogen Balmer series, mercury and cadmium vapor spectra, fluorescence, phosphorescence, neon signs, fluorescent lights, and helium-neon lasers.
3. The document provides diagrams of electron energy levels, laser operation, and spectra of lasers and LEDs.
Fission and fusion
This document discusses nuclear fission and fusion. It describes how fission occurs when a large nucleus splits into two smaller nuclei along with neutrons. Fission can be spontaneous or induced by neutron bombardment. Induced fission involves bombarding atoms with neutrons which causes the nuclei to split. The document also explains nuclear fusion, where two low mass nuclei combine to form a heavier nucleus along with energy release. Fusion occurs through the combining of hydrogen isotopes to form helium. Both fission and fusion result in the release of kinetic energy greater than the initial particles.
Fission and fusion
The document discusses nuclear fission and fusion. Nuclear fission occurs when a nucleus splits into two smaller nuclei and releases neutrons. There are two types of fission: spontaneous fission of unstable radioactive isotopes and induced fission which is caused by bombarding atoms with neutrons. Nuclear fusion occurs when two low mass nuclei combine to form a higher mass nucleus and release energy. Fusion takes place in stars and involves hydrogen fusing to form helium.
Heavy elements
Heavy elements are elements with an atomic number greater than 92, with the first being neptunium. Superheavy elements have an atomic number greater than or equal to 112. New elements and isotopes are produced artificially using techniques like heavy ion transfer reactions in cyclotrons or particle accelerators. Discovering new superheavy elements helps prove nuclear theories and increases understanding of how nuclei are structured and resist fission. Potential applications of these unstable, radioactive elements are still unknown but may be discovered in the future.
Nuclear power 4th class
Nuclear power generates electricity through fission, which is the splitting of atoms to release energy. It produces no air pollution since it does not burn fuel like coal plants. While risks exist such as potential meltdowns, nuclear power is a clean and safe alternative that provides a significant portion of the world's energy needs. It has also been used to develop nuclear weapons, though the technology was originally developed in the early 20th century by German scientists.
Nuclear power resources in pakistan
This document discusses nuclear energy in Pakistan. It provides information on how nuclear energy works through atomic fission and how nuclear power plants produce energy similarly to fossil fuel plants by using heat to create steam to power turbines. The document also lists the existing nuclear power plants in Pakistan as Chasma Nuclear Power Plant and Karachi Nuclear Power Plant, and discusses an expert urging Pakistan to develop its peaceful nuclear program and export nuclear technology and expertise.
Matter and materials (II) Paticles that substances are made up of
Particles that substances are made up of can be atoms, molecules, or ions. Atoms are the basic building blocks of matter that combine to form elements or compounds. Elements are either monoatomic like hydrogen gas or diatomic like oxygen gas. Compounds contain two or more different elements combined in fixed proportions. The molecular, empirical, and structural formulas are used to represent compounds. Substances can have covalent, ionic, or metallic bonding that results in different macroscopic properties. Chemical and physical changes can be distinguished based on whether atoms are rearranged. Chemical reactions involve energy absorption or release as bonds are broken and formed.
What's hot (18)
Delivering Science by means of English and using Mathematics.
Delivering Science by means of English and using Mathematics.
Jan8 2014 CHEM 121 Lecture Dominican University Wanda Oehrli
Jan8 2014 CHEM 121 Lecture Dominican University Wanda Oehrli
Matter and materials (II) Paticles that substances are made up of
Matter and materials (II) Paticles that substances are made up of
Similar to Energy in industry and living things
Nuclear fusion presentation (general)
This is frontier research of physics specified in basic energy of physics..
hope it will be helpful for you in future lillah!
Energy. diagram
Energy is defined as the ability to do work. There are several forms of energy including mechanical, chemical, thermal, nuclear, electrical, light, and sound. Mechanical energy can be either potential or kinetic depending on position or movement. Chemical energy involves the transformation of substances releasing light, heat, etc. Thermal energy comes from atomic vibrations that produce heat. Nuclear energy involves reactions inside atoms like uranium. Electrical energy is the flow of electrons. Light is a form of radiation. Sound is made of vibrations. Energy sources are grouped into non-renewable like coal, petroleum, and natural gas, and renewable like hydropower.
Nuclear energy PPT
This document provides an overview of nuclear energy written by Anubhav Kumar Lath for class 8. It defines nuclear energy as energy generated from nuclear reactions that change the nucleus of an atom. There are two ways to obtain nuclear energy: nuclear fission and nuclear fusion. Nuclear fission involves splitting heavy radioactive nuclei like uranium and generates large amounts of heat. Nuclear fusion combines light elements and occurs as the energy source of the sun. The document discusses advantages and disadvantages of nuclear energy as well as countries that use it and the risks involved.
Origin of life
The early Earth formed 4.6 billion years ago from dust swirling around the sun. By 4.2 billion years ago, the Earth had cooled enough for oceans to form, creating a chemical soup atmosphere containing nitrogen, oxygen, carbon dioxide, and water vapor. Experiments in the 1950s by Stanley Miller successfully produced amino acids by sparking a chamber simulating the early Earth's atmosphere, supporting the hypothesis that life began through natural chemical reactions. Other theories suggest life began at hydrothermal vents or through chemical reactions on clay surfaces. Over time, RNA chunks accumulated on clay and began replicating. Once RNA coded for proteins, lipids formed cell membranes, creating the first protocells around 3.85 billion years ago.
Chemistry - State of Matter ;)
This document discusses the three states of matter - gases, liquids, and solids. It describes the properties and behavior of particles in each state. Gases have no fixed shape or volume and particles are far apart. Liquids take the shape of their container and particles have limited movement. Solids have fixed shape and volume, particles are touching and arranged regularly in crystalline structures. The document then examines the kinetic theory of gases and ideal gas laws. It discusses limitations of ideal gas behavior and different solid state structures like ionic, metallic, molecular and giant molecular lattices. Ceramics and their properties are also covered. Finally, the importance of conserving resources through metal recycling is discussed.
Physical Science Module 1.pptx
The document discusses how elements are formed in the universe through three main nuclear reactions: nucleosynthesis during the Big Bang formed light elements like hydrogen and helium, nuclear fusion in stars forms heavier elements up to iron, and neutron capture reactions during supernovae explosions produce elements heavier than iron. These nuclear reactions require extremely high temperatures and pressures to fuse atomic nuclei together or allow neutron capture, conditions only found in the early universe, inside stars and supernovae. Element formation relies on balancing the number of protons and neutrons in atomic nuclei to achieve stable configurations through fusion, fission, radioactive decay, or transmutation into other elements.
Module I_ Origin_of_life (1) (1).ppt
The document discusses several key stages in the origin of life on Earth:
1) Abiotic synthesis of organic molecules like amino acids from simple gases in Earth's early reducing atmosphere, as demonstrated by the Miller-Urey experiment.
2) Self-assembly of these organic molecules into increasingly complex structures like microspheres and coacervates.
3) Emergence of primitive self-replicating systems able to direct their own metabolism.
4) Development of the first genetic code in these precellular systems linking nucleic acids to protein synthesis.
5) Evolution of fully formed cells enclosing genetic material within a nuclear membrane.
Unit_4_NC.pptx
This document provides an overview of energy storage and conversion devices including batteries, fuel cells, and supercapacitors. It discusses the principles and components of these devices, as well as their applications. Specifically, it describes the basic structure and workings of batteries, fuel cells, and supercapacitors. It also covers the different types of each device and their advantages and limitations.
Concepts of Matter and Energy
This document discusses concepts of matter and energy. Matter is anything that occupies space and has mass, existing as solids or liquids. Physical changes alter the form of matter without changing its chemical composition, while chemical changes involve changes to its components. Energy has no mass and does not occupy space, existing in kinetic, potential, chemical, electrical, mechanical, and radiant forms. At the atomic level, elements are made up of protons, neutrons, and electrons. The number of protons defines an element and atoms bond through electrical attraction between protons and electrons.
Ankit
Nuclear energy comes from nuclear reactions that release energy. It can be generated via two processes: nuclear fission and nuclear fusion. Nuclear fission involves splitting heavy radioactive elements like uranium and produces huge amounts of heat, which is used in nuclear reactors to generate electricity. Nuclear fusion combines light elements to form heavier elements and release energy, but is very difficult to control and cannot currently be used to generate electricity. Nuclear power provides about 5.7% of the world's energy through fission reactions in nuclear reactors. While it has advantages like producing large amounts of energy with low carbon emissions, it also has disadvantages like producing long-lasting radioactive waste that is difficult to dispose of safely.
Blueprint curriculum maps v2.0
The structure of the 5-year plan (year 7-11). It is organised as 45 units in big idea strands. The 3 maps show a Key Concept sequence for physics, chemistry and biology.
Artificial photosynthesis PPT
Artificial photosynthesis is a chemical process that replicates the natural process of photosynthesis, a process that converts sunlight, water, and carbon dioxide into carbohydrates and oxygen; as an imitation of a natural process, it is biomimetic. The term, artificial photosynthesis, is commonly used to refer to any scheme for capturing and storing the energy from sunlight in the chemical bonds of a fuel (a solar fuel). Photocatalytic water splitting converts water into hydrogen ions and oxygen and is a major research topic in artificial photosynthesis. Light-driven carbon dioxide reduction is another process studied, that replicates natural carbon fixation.
This Artificial Photosynthesis ppt covers all the processes involved in Artificial Photosynthesis, current researchers on Artificial Photosynthesis, key issues, challenges in artificial photosynthesis
Obj 4 forms of energy and living organism's response (2)
There are six main types of energy: mechanical, thermal, chemical, electrical, electromagnetic, and nuclear. Mechanical energy deals with motion, thermal energy is generated by molecular motion, chemical energy is stored in bonds, and electrical energy powers devices. Electromagnetic energy travels in waves like radiation, while nuclear energy is stored in atoms and released during nuclear reactions. The law of conservation states that energy cannot be created or destroyed, only changed from one form to another.
Introduction to Nuclear Power Generation
Nuclear power generation involves harnessing energy from nuclear fission reactions that take place inside nuclear reactors. The document discusses how nuclear fission reactions produce heat that is used to generate steam and power turbines to produce electricity. It also notes that nuclear power plants do not emit greenhouse gases like fossil fuel plants. However, nuclear power does produce radioactive waste that requires careful management and storage. Overall, the document presents nuclear power as a potential solution to meeting energy demands while reducing environmental impacts compared to fossil fuels.
5.9 Fission vs Fusion and Nuclear Energy
Nuclear fission occurs when the nuclei of certain isotopes split into smaller fragments upon bombardment with neutrons, producing a chain reaction that releases enormous amounts of energy. Controlled nuclear fission in reactors uses uranium or plutonium fuel rods to produce heat that is used to generate electricity, while spent fuel rods become nuclear waste. Nuclear fusion differs in that it involves the combining rather than splitting of small nuclei like hydrogen to form larger nuclei like helium, potentially releasing even more energy, but technical challenges remain in achieving and containing the necessary high temperatures.
Ppt fusion and_fission_wk4
The document discusses nuclear fusion and fission. It explains that fusion in the sun converts hydrogen into helium, releasing energy. Fission occurs when atomic nuclei split, also releasing energy. This energy from fusion and fission is harnessed to generate electricity. Nuclear fission in power plants produces radioactive waste that requires long term storage.
Nuclear synthesis
The document discusses the origins of the chemical elements. It explains that the first four elements (hydrogen, helium, lithium, and beryllium) were produced during nucleosynthesis shortly after the Big Bang. Elements up to iron were later created through nuclear fusion in stars. Elements heavier than iron, up to and including uranium, were produced during supernovae. The document outlines the nuclear fusion processes that occur in stars at different stages to produce these heavier elements, which are then dispersed into nebulae and can form new stars and planets.
Energy Transformation
This document discusses the six main types of energy (kinetic, potential, mechanical, radiant, electrical, and chemical), provides examples of each, and explains the law of conservation of energy. It encourages students to identify energy transformations by creating flow charts for scenarios and a poster demonstrating an energy transformation through accurate diagrams and explanations. The main points are identifying six types of energy, showing how energy transforms between forms, and applying the law of conservation of energy to examples.
How chemistry and the environment mix lecture 2
This document provides an overview of key concepts from Chapter 4 of the textbook "Environmental Science: A Study of Interrelationships". It discusses the scientific method, the nature of matter and energy, and important thermodynamic principles. Specifically, it describes how science involves testing hypotheses, the structure of atoms and molecules, states of matter, chemical reactions, the various forms of energy, and the laws of thermodynamics governing energy transfer.
Bio 105 Chapter 2
The document discusses key concepts in environmental science including:
1. Matter and energy undergo transformations but are never created or destroyed.
2. Systems have inputs, outputs, and feedback loops that can cause nonlinear changes over time.
3. The interactions between living and nonliving things are complex with effects that are sometimes greater than the sum of individual parts.
Similar to Energy in industry and living things (20)
Obj 4 forms of energy and living organism's response (2)
Obj 4 forms of energy and living organism's response (2)
Recently uploaded
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Particle-In-Cell (PIC) algorithm,
Plasma expansion in the dipole magnetic field.
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero WaterTexas Alliance of Groundwater Districts
Presented at June 6-7 Texas Alliance of Groundwater Districts Business MeetingTHEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsMicronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Cytokines and their role in immune regulation.pptx
This presentation covers the content and information on "Cytokines " and their role in immune regulation .
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Authoring a personal GPT for your research and practice: How we created the Q...
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Phenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Recently uploaded (20)
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Cytokines and their role in immune regulation.pptx
Cytokines and their role in immune regulation.pptx
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
Authoring a personal GPT for your research and practice: How we created the Q...
Authoring a personal GPT for your research and practice: How we created the Q...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Energy in industry and living things
- 2. TYPES OF ENERGY • 1. KINETIC ENERGY • 2. HEAT ENERGY • 3. ELECTRICAL ENERGY • 4. POTENTIAL ENERGY • 5. LIGHT ENERGY • 6. NUCLEAR ENERGY • 7. RADIATION • 8. CHEMICAL ENERGY • 9. SOLAR ENERGY
- 3. 1. KINETIC ENERGY Gas molecules are mobile molecules. Light molecules move faster 2. HEAT ENERGY Physical changes : heat of ….. Chemical changes : Bond dissociation enthaply – Bond formation enthalpy
- 4. 3. ELECTRICAL ENERGY 4. POTENTIAL ENERGY Electrolysis
- 5. 5. LIGHT ENERGY 6. NUCLEAR ENERGY Protons and neutrons are held together by nuclear energy
- 6. 7. RADIATION 8. CHEMICAL ENERGY 9. SOLAR ENERGY In nuclear rxns energy is released in the form of radiation. X Y + Z + energy X : Heavy unstable nucleus Y & Z : lighter nuclei
- 7. FOSSIL FUELS
- 8. FOSSIL FUELS • https://www.youtube.com/watch?v=zaxbvyr9ij0
- 11. TYPES OF COAL
- 15. PETROLEUM REFINING • HOW DOES AN OIL REFINERY WORK? HOW IS CRUDE OIL TRANSFORMED INTO EVERYDAY USABLE PRODUCTS? • https://www.youtube.com/watch?v=MdLVzXf7v5E • HOW IS PETROLEUM REFINED ? • https://www.youtube.com/watch?v=j2-tdv8kyea
- 18. cleaning fluids paint and varnish diluents asphalt diluents rubber industry solvents cigarette lighters portable camping stove and lantern fuels.
- 19. • product of styrene and polystyren plastics • pesticides • rubber • pharmaceuticals.
- 21. BIOMASS / RENEWABLE / CLEAN ENERGY SOURCES • https://www.youtube.com/watch?v=keeh4enim3e
- 23. ORGANIC COMPOUNDS • CHEMISTS IN THE EARLY NINETEENTH CENTURY KNEW THAT LIVING THINGS, SUCH AS THE PLANTS AND PANDA PRODUCE AN IMMENSE VARIETY OF CARBON COMPOUNDS. CHEMISTS REFERRED TO THESE COMPOUNDS AS ORGANIC COMPOUNDS BECAUSE THEY WERE PRODUCED BY LIVING ORGANISMS.
- 24. • THE SIMPLEST ORGANIC COMPOUNDS ARE HYDROCARBONS, WHICH CONTAIN ONLY THE ELEMENTS CARBON AND HYDROGEN. Hydrocarbons
- 25. Molecular Structure Of Hydrocarbons • ALKANES • CYCLOALKANES • ALKENES • ALKYNES • AROMATIC HYDROCARBONS
- 27. ALKYL GROUPS
- 28. CYCLOALKANES
- 31. ADDITION OF HYDROGEN TO ALKENES & ALKYNES