Electricity storm by emma and francesca
•Download as PPTX, PDF•
0 likes•256 views
The document provides tips for saving electricity such as turning off lights when not in use, closing curtains on hot days, and taking shorter showers. It also discusses how electricity is generated using resources like water, wind, and solar power through dams, windmills, and solar panels. The document asks how New Zealand can ensure a stable electricity supply in the future and suggests options like windmills and expanding hydroelectric dams.
Report
Share
Report
Share
Recommended
Intro to electricity cristina hernandez
Electricity is produced when electrons move between atoms. It is everywhere in electrical outlets, batteries, and static electricity from rubbing your feet on carpet. An electric circuit allows electrons to flow continuously from a power source like a battery through a conductor like a wire back to the source. Conductors freely allow electron movement while insulators do not, preventing shocks. Electricity can be static and stay in one place or use current to flow through closed circuits in appliances, creating alternating currents.
Cris
Electricity is a form of energy involving electrons, protons, and neutrons that exists in three main types: direct current, alternating current, and static electricity. Direct current flows in one direction while alternating current oscillates back and forth as used in homes. Electricity was first discovered by the Greeks over 3,000 years ago and now travels through homes via electrical cables. To keep a home safe from electricity, outlets should have child covers, damaged cords replaced, and cords kept away from water. Dangers include standing in water or near metal during storms, and how to avoid them is to stay away from water and metal during storms and tall structures.
Band theory of semiconductor
This document discusses semiconductors and their properties. Semiconductors have resistivity between good conductors and insulators, around 10-2 to 104 ohm meters at room temperature. In semiconductors, there is a small forbidden gap between the valence band and conduction band of around 0.7-1.1 electronvolts. This small gap means electrons can move between bands with only a small amount of energy, allowing semiconductors to conduct electricity. In contrast, insulators have a large forbidden gap over 3 electronvolts, while conductors have no gap between bands.
Form 3 PMR Science Chapter 7 Electricity
The document discusses static electricity and electrostatics. It explains that static electricity is produced when two insulators are rubbed together, which causes the transfer of electrons between the materials. Electrostatics is the study of static electricity and electrical charges. Some key points are that like charges repel and unlike charges attract, electrons can move between materials causing some to become positively charged and others negatively charged, and electrostatics can be observed in phenomena like static cling and lightning.
Electricity by cam and tavita
To ensure New Zealand always has enough electricity, unused power could be stored in giant batteries and sent back to power stations when needed. Electricity is generated through various sources like dams, wind turbines, solar panels and nuclear fusion. Fuses help prevent too much electricity from flowing by melting and breaking the circuit, while conductors like metal allow electricity to flow and insulators stop electricity from flowing through materials like plastic, wool and wood.
Cris
Electricity is a form of energy involving electrons and protons that exists in three types: direct current, alternating current, and static electricity. Direct current flows in one direction while alternating current oscillates back and forth as used in homes. Electricity was first discovered by Greeks over 3,000 years ago and now travels through homes via electrical cables. To keep homes safe, outlets should be covered, frayed cords replaced, and cords kept away from water. Dangers of electricity include being near water or metal during storms or going up tall structures, and can be avoided by staying away from hazards during storms. Electrical meters measure voltage, current in amps, and wattage representing pressure.
Electrical Energy
The document discusses key concepts about electrical energy including:
- Atoms are made up of a nucleus surrounded by electrons that carry a negative charge. Protons in the nucleus carry a positive charge while neutrons carry no charge.
- Static electricity occurs when surfaces rub against each other, transferring electrons between them and building up positive or negative charges.
- Electric current involves the flow of electrons along a wire or conductor, which can be measured in amps. Voltage measures the energy supplied by these charges and is measured in volts.
Lightning
Electrostatic discharge occurs when there is a build up of high electric potential that finds a path through a high-resistance medium to discharge. There are three primary types of electrostatic discharge: intra-cloud, cloud-cloud, and cloud-ground lightning. Lightning requires high electric potential, a high-resistance medium, and occurs in three main forms depending on if it is within a cloud, between clouds, or between a cloud and the ground.
Recommended
Intro to electricity cristina hernandez
Electricity is produced when electrons move between atoms. It is everywhere in electrical outlets, batteries, and static electricity from rubbing your feet on carpet. An electric circuit allows electrons to flow continuously from a power source like a battery through a conductor like a wire back to the source. Conductors freely allow electron movement while insulators do not, preventing shocks. Electricity can be static and stay in one place or use current to flow through closed circuits in appliances, creating alternating currents.
Cris
Electricity is a form of energy involving electrons, protons, and neutrons that exists in three main types: direct current, alternating current, and static electricity. Direct current flows in one direction while alternating current oscillates back and forth as used in homes. Electricity was first discovered by the Greeks over 3,000 years ago and now travels through homes via electrical cables. To keep a home safe from electricity, outlets should have child covers, damaged cords replaced, and cords kept away from water. Dangers include standing in water or near metal during storms, and how to avoid them is to stay away from water and metal during storms and tall structures.
Band theory of semiconductor
This document discusses semiconductors and their properties. Semiconductors have resistivity between good conductors and insulators, around 10-2 to 104 ohm meters at room temperature. In semiconductors, there is a small forbidden gap between the valence band and conduction band of around 0.7-1.1 electronvolts. This small gap means electrons can move between bands with only a small amount of energy, allowing semiconductors to conduct electricity. In contrast, insulators have a large forbidden gap over 3 electronvolts, while conductors have no gap between bands.
Form 3 PMR Science Chapter 7 Electricity
The document discusses static electricity and electrostatics. It explains that static electricity is produced when two insulators are rubbed together, which causes the transfer of electrons between the materials. Electrostatics is the study of static electricity and electrical charges. Some key points are that like charges repel and unlike charges attract, electrons can move between materials causing some to become positively charged and others negatively charged, and electrostatics can be observed in phenomena like static cling and lightning.
Electricity by cam and tavita
To ensure New Zealand always has enough electricity, unused power could be stored in giant batteries and sent back to power stations when needed. Electricity is generated through various sources like dams, wind turbines, solar panels and nuclear fusion. Fuses help prevent too much electricity from flowing by melting and breaking the circuit, while conductors like metal allow electricity to flow and insulators stop electricity from flowing through materials like plastic, wool and wood.
Cris
Electricity is a form of energy involving electrons and protons that exists in three types: direct current, alternating current, and static electricity. Direct current flows in one direction while alternating current oscillates back and forth as used in homes. Electricity was first discovered by Greeks over 3,000 years ago and now travels through homes via electrical cables. To keep homes safe, outlets should be covered, frayed cords replaced, and cords kept away from water. Dangers of electricity include being near water or metal during storms or going up tall structures, and can be avoided by staying away from hazards during storms. Electrical meters measure voltage, current in amps, and wattage representing pressure.
Electrical Energy
The document discusses key concepts about electrical energy including:
- Atoms are made up of a nucleus surrounded by electrons that carry a negative charge. Protons in the nucleus carry a positive charge while neutrons carry no charge.
- Static electricity occurs when surfaces rub against each other, transferring electrons between them and building up positive or negative charges.
- Electric current involves the flow of electrons along a wire or conductor, which can be measured in amps. Voltage measures the energy supplied by these charges and is measured in volts.
Lightning
Electrostatic discharge occurs when there is a build up of high electric potential that finds a path through a high-resistance medium to discharge. There are three primary types of electrostatic discharge: intra-cloud, cloud-cloud, and cloud-ground lightning. Lightning requires high electric potential, a high-resistance medium, and occurs in three main forms depending on if it is within a cloud, between clouds, or between a cloud and the ground.
Energy band and energy gap by Pratimesh pathak
This document summarizes a presentation on energy bands and gaps. It defines energy bands as ranges of allowed electron energies in solids, and energy gaps as ranges where no electron states can exist. Specifically, it describes the valence band containing bound electrons, the conduction band containing free electrons, and the forbidden band or gap between them. It explains direct and indirect band gaps, where electrons either do or do not change momentum when transitioning between bands. The purpose is to provide information on these fundamental concepts of electronic band structure in solids.
AST 406 Conductors
The document discusses conductors, semiconductors, and insulators. It defines conductors as substances that allow free flow of electrical charges, like metal wires and graphite rods. Semiconductors have conductivity between conductors and insulators, allowing some control of charge flow. Insulators do not allow charge flow and include materials like plastic, wood, and glass. The document discusses factors that affect conductance, including length, diameter, temperature, and material of a wire. Copper is identified as the best conducting material.
Science unit8 electricity and magnetism berg
Electricity and magnetism are covered in this unit. Electricity is the movement of electrons, and objects can be neutral, positively charged, or negatively charged depending on the balance of protons and electrons. Electric current is the flow of electrons in conductors. Electricity is generated in power plants and distributed through power lines to where we consume it and transform it into other forms of energy. Electric circuits require a conductor, power source, resistor, and switch to conduct current and do work. Magnets can attract metals, with opposite poles attracting and like poles repelling. The Earth acts as a giant magnet that creates its magnetic field with a north and south pole.
Electicity log from alexa
This document contains information about electricity and electrical circuits. It discusses key concepts like closed and open circuits, series and parallel circuits, conductors and insulators. It also covers topics such as how light bulbs, static electricity, and lightning work. Key inventors like Thomas Edison are mentioned. Safety tips for lightning are provided at the end.
B.tech sem i engineering physics u ii chapter 1-band theory of solid
This document provides an overview of band theory of solids. It discusses effective mass of electrons in solids, the concept of holes, and the energy band structure of conductors, semiconductors, and insulators. Intrinsic and extrinsic semiconductors are described, along with p-type and n-type materials. Simple diode and Zener diode operation is summarized, including forward and reverse bias conditions.
Electrical Engineering Material Part-III
The document discusses electrons in solids and the fundamentals of bonding in solids. It notes that in solids, electrons interact with one another at high densities of 1028 per cubic meter. Atoms maintain their individual energy levels even when bonded together in solids and molecules. Bonding in solids involves interatomic binding forces called chemical bonds that hold atoms, ions, and molecules at different spacing levels, including primary and secondary bonds that are classified into four categories.
Lesson 6 electric energy
Electricity has dramatically changed daily life over the past 100 years. Scientists like Benjamin Franklin, Thomas Edison, and Nikola Tesla helped uncover the principles of electricity. A battery produces electricity through a chemical reaction between two different metals in a solution, generating a flow of electrons. This electricity can power devices when wires provide a complete circuit between the battery's positive and negative terminals. Switches allow control of whether a circuit is open or closed.
Conductor semiconductor insulator
This document discusses energy bands in solids and classifications of materials based on their band structure. It explains that in solids, electron energy levels form bands of allowed energies separated by forbidden bands. Materials are classified as conductors, insulators or semiconductors depending on their band gap. Conductors have overlapping bands resulting in no band gap, insulators have a large band gap, and semiconductors have a narrow band gap that allows excitation of electrons with small amounts of energy. Intrinsic and extrinsic semiconductors are also described based on their pure or doped material composition and charge carrier types.
Chaudhary
This document discusses electricity and electric charges. It explains that there are two types of electric charges - positive and negative. Opposite charges attract each other, while similar charges repel. The standard unit of electric charge is the coulomb. All matter contains positively charged protons and negatively charged electrons. Substances can be conductors or insulators depending on how easily electric charges can flow through them. Electric potential is defined as the work required to move a positive charge from infinity to a given point in an electric field.
Basic Electricity 4th grade level
Electricity is the flow of electrons through conductors. It is present in lightning and power grids and allows appliances to function when plugged in. A circuit needs both a power source and a closed loop to allow electricity to flow. Switches and bulbs can be added to circuits to control and indicate the flow of electricity, with parallel circuits powering multiple devices simultaneously and series circuits requiring uninterrupted flow.
Energy bands and gaps in semiconductor
This document summarizes a seminar on energy bands and gaps in semiconductors. It discusses the introduction of energy bands, including valence bands, conduction bands, and forbidden gaps. It describes how materials are classified as insulators, conductors, or semiconductors based on their band gap energies. Direct and indirect band gap semiconductors are also defined. Intrinsic, n-type, and p-type semiconductors are classified based on their majority charge carriers.
Introducing Electricity
This document introduces electricity and electric circuits. It discusses:
1) The sources of electricity as main electricity from power stations and electric cells for portable devices.
2) The components of an electric circuit including connecting wires, bulbs, switches, and cells.
3) How circuits can be arranged in series or parallel and the differences between complete and incomplete circuits.
Conductors and insulators
The document discusses different types of materials in electric circuits. It states that materials fall into three categories: insulators, conductors, and resistors. Insulators do not allow electric current to flow, examples include plastic and rubber. Conductors allow current to flow easily, examples include metals like copper and aluminum. Resistors allow some current to flow but convert some to other forms of energy like light, motion, heat, or sound. Circuits must have a continuous conductive path for current to flow from the power source. Switches are used to open and close circuits to control current flow.
Electrical Conductors And Insulators
Electrical conductors allow electric current to flow through, such as metals like copper and aluminum, as well as some non-metals like graphite. Good electrical conductors are also generally good heat conductors. Electrical insulators do not allow electric current to flow through, with examples being plastics, wood, rubber and glass. A circuit tester can be used to determine if a material is a conductor or insulator by seeing if it allows a bulb in the circuit to light up when placed between the clips.
Electricity and Circuits Class 6
Click Here: https://www.digistore24.com/redir/269221/Manikji/
Topics Included:
• Inside View of a Torch
• Electric Bulb
• Filament
• Terminal
• Electrical Energy
• Electric Cell
• Electric Circuit
• Types of Circuit
• Open and Closed Switch
• Solar Cell
• Conductor and Insulator
• Different Methods of Producing Electricity
Copper pair (bcs theory)
This document discusses copper pairs and quantum tunneling in superconductivity. It first provides context on superconductivity, the Meissner effect, and BCS theory. It then explains that below the superconducting transition temperature, paired electrons called Cooper pairs form a condensate occupying a single quantum state, allowing them to flow without resistance. Cooper pairs consist of two electrons bound together at low temperatures according to BCS theory, despite their negative charges which would normally cause repulsion. The document also briefly mentions the concept of quantum tunneling in relation to superconductivity.
Diode
This document discusses energy bands in solids and semiconductors. It explains that in solids, the close arrangement of atoms results in the intermixing of electron orbitals between neighboring atoms. This leads to the formation of continuous and allowed energy bands separated by forbidden gaps. In insulators, the forbidden gap is large, while in semiconductors it is much smaller, around 0.7-1.1 eV. Semiconductors have electrical resistivity between conductors and insulators. The document also describes how doping semiconductors with group 3 or 5 atoms creates an excess or deficiency of electrons, forming n-type or p-type materials respectively.
4th grade ch. 13 sec. 2 how do electric charges flow
Electric current is the continuous flow of electric charges through a material. It can only exist in a complete electric circuit, which provides an unbroken path for charges to flow. Conductors are materials that allow easy flow of charges, while insulators do not allow charges to move freely. Resistance measures how difficult it is for charges to flow through a material. Series circuits have one path for current, while parallel circuits have several paths and decreased resistance.
Semiconductor materials
This document discusses semiconductor materials and their properties. It introduces intrinsic and extrinsic semiconductors. Intrinsic materials like silicon, germanium, and gallium arsenide have characteristic energy band gaps and intrinsic carrier concentrations. Extrinsic materials are formed by doping intrinsic materials with impurities to create excess electrons (n-type) or holes (p-type). The document explores doping processes and how impurities donate or accept electrons to influence a material's conductivity. It also examines bonding structures and carrier mobility in various semiconductors.
02 insulators and conductors
Insulators are substances where electrons cannot move freely, causing a charge to build up on their surface. Conductors allow electrons to move freely throughout. Electricians wear insulating clothing to avoid electrocution from conducting electricity. We get more static shocks in winter because dry air is an insulator that does not remove the charges our bodies pick up, resulting in a shock when we touch a conductor like a doorknob. Airplanes are made of both conductors and insulators for safety - the surface is a conductor so lightning can pass through, while the interior uses insulators so electrons cannot reach the passenger cabin.
Electrical storm by karhn
An electrical conductor allows electrons to flow through it, while an insulator does not allow electricity to pass through. It is important to turn off outlets at the wall when not in use to save electricity by switching it off if it is not being used.
Electrical storm!chyna and maddie.
This document discusses electricity sources in New Zealand and ways to conserve electricity for the future. It explains that electricity comes from power stations, dams, and solar panels. The main sources are solar, wind, tidal, chemical, batteries, fuel cells, nuclear, and hydro power. It also provides tips for conserving electricity such as turning off lights and appliances when not in use. If the population increases, conservation will help ensure there is enough electricity for everyone.
More Related Content
What's hot
Energy band and energy gap by Pratimesh pathak
This document summarizes a presentation on energy bands and gaps. It defines energy bands as ranges of allowed electron energies in solids, and energy gaps as ranges where no electron states can exist. Specifically, it describes the valence band containing bound electrons, the conduction band containing free electrons, and the forbidden band or gap between them. It explains direct and indirect band gaps, where electrons either do or do not change momentum when transitioning between bands. The purpose is to provide information on these fundamental concepts of electronic band structure in solids.
AST 406 Conductors
The document discusses conductors, semiconductors, and insulators. It defines conductors as substances that allow free flow of electrical charges, like metal wires and graphite rods. Semiconductors have conductivity between conductors and insulators, allowing some control of charge flow. Insulators do not allow charge flow and include materials like plastic, wood, and glass. The document discusses factors that affect conductance, including length, diameter, temperature, and material of a wire. Copper is identified as the best conducting material.
Science unit8 electricity and magnetism berg
Electricity and magnetism are covered in this unit. Electricity is the movement of electrons, and objects can be neutral, positively charged, or negatively charged depending on the balance of protons and electrons. Electric current is the flow of electrons in conductors. Electricity is generated in power plants and distributed through power lines to where we consume it and transform it into other forms of energy. Electric circuits require a conductor, power source, resistor, and switch to conduct current and do work. Magnets can attract metals, with opposite poles attracting and like poles repelling. The Earth acts as a giant magnet that creates its magnetic field with a north and south pole.
Electicity log from alexa
This document contains information about electricity and electrical circuits. It discusses key concepts like closed and open circuits, series and parallel circuits, conductors and insulators. It also covers topics such as how light bulbs, static electricity, and lightning work. Key inventors like Thomas Edison are mentioned. Safety tips for lightning are provided at the end.
B.tech sem i engineering physics u ii chapter 1-band theory of solid
This document provides an overview of band theory of solids. It discusses effective mass of electrons in solids, the concept of holes, and the energy band structure of conductors, semiconductors, and insulators. Intrinsic and extrinsic semiconductors are described, along with p-type and n-type materials. Simple diode and Zener diode operation is summarized, including forward and reverse bias conditions.
Electrical Engineering Material Part-III
The document discusses electrons in solids and the fundamentals of bonding in solids. It notes that in solids, electrons interact with one another at high densities of 1028 per cubic meter. Atoms maintain their individual energy levels even when bonded together in solids and molecules. Bonding in solids involves interatomic binding forces called chemical bonds that hold atoms, ions, and molecules at different spacing levels, including primary and secondary bonds that are classified into four categories.
Lesson 6 electric energy
Electricity has dramatically changed daily life over the past 100 years. Scientists like Benjamin Franklin, Thomas Edison, and Nikola Tesla helped uncover the principles of electricity. A battery produces electricity through a chemical reaction between two different metals in a solution, generating a flow of electrons. This electricity can power devices when wires provide a complete circuit between the battery's positive and negative terminals. Switches allow control of whether a circuit is open or closed.
Conductor semiconductor insulator
This document discusses energy bands in solids and classifications of materials based on their band structure. It explains that in solids, electron energy levels form bands of allowed energies separated by forbidden bands. Materials are classified as conductors, insulators or semiconductors depending on their band gap. Conductors have overlapping bands resulting in no band gap, insulators have a large band gap, and semiconductors have a narrow band gap that allows excitation of electrons with small amounts of energy. Intrinsic and extrinsic semiconductors are also described based on their pure or doped material composition and charge carrier types.
Chaudhary
This document discusses electricity and electric charges. It explains that there are two types of electric charges - positive and negative. Opposite charges attract each other, while similar charges repel. The standard unit of electric charge is the coulomb. All matter contains positively charged protons and negatively charged electrons. Substances can be conductors or insulators depending on how easily electric charges can flow through them. Electric potential is defined as the work required to move a positive charge from infinity to a given point in an electric field.
Basic Electricity 4th grade level
Electricity is the flow of electrons through conductors. It is present in lightning and power grids and allows appliances to function when plugged in. A circuit needs both a power source and a closed loop to allow electricity to flow. Switches and bulbs can be added to circuits to control and indicate the flow of electricity, with parallel circuits powering multiple devices simultaneously and series circuits requiring uninterrupted flow.
Energy bands and gaps in semiconductor
This document summarizes a seminar on energy bands and gaps in semiconductors. It discusses the introduction of energy bands, including valence bands, conduction bands, and forbidden gaps. It describes how materials are classified as insulators, conductors, or semiconductors based on their band gap energies. Direct and indirect band gap semiconductors are also defined. Intrinsic, n-type, and p-type semiconductors are classified based on their majority charge carriers.
Introducing Electricity
This document introduces electricity and electric circuits. It discusses:
1) The sources of electricity as main electricity from power stations and electric cells for portable devices.
2) The components of an electric circuit including connecting wires, bulbs, switches, and cells.
3) How circuits can be arranged in series or parallel and the differences between complete and incomplete circuits.
Conductors and insulators
The document discusses different types of materials in electric circuits. It states that materials fall into three categories: insulators, conductors, and resistors. Insulators do not allow electric current to flow, examples include plastic and rubber. Conductors allow current to flow easily, examples include metals like copper and aluminum. Resistors allow some current to flow but convert some to other forms of energy like light, motion, heat, or sound. Circuits must have a continuous conductive path for current to flow from the power source. Switches are used to open and close circuits to control current flow.
Electrical Conductors And Insulators
Electrical conductors allow electric current to flow through, such as metals like copper and aluminum, as well as some non-metals like graphite. Good electrical conductors are also generally good heat conductors. Electrical insulators do not allow electric current to flow through, with examples being plastics, wood, rubber and glass. A circuit tester can be used to determine if a material is a conductor or insulator by seeing if it allows a bulb in the circuit to light up when placed between the clips.
Electricity and Circuits Class 6
Click Here: https://www.digistore24.com/redir/269221/Manikji/
Topics Included:
• Inside View of a Torch
• Electric Bulb
• Filament
• Terminal
• Electrical Energy
• Electric Cell
• Electric Circuit
• Types of Circuit
• Open and Closed Switch
• Solar Cell
• Conductor and Insulator
• Different Methods of Producing Electricity
Copper pair (bcs theory)
This document discusses copper pairs and quantum tunneling in superconductivity. It first provides context on superconductivity, the Meissner effect, and BCS theory. It then explains that below the superconducting transition temperature, paired electrons called Cooper pairs form a condensate occupying a single quantum state, allowing them to flow without resistance. Cooper pairs consist of two electrons bound together at low temperatures according to BCS theory, despite their negative charges which would normally cause repulsion. The document also briefly mentions the concept of quantum tunneling in relation to superconductivity.
Diode
This document discusses energy bands in solids and semiconductors. It explains that in solids, the close arrangement of atoms results in the intermixing of electron orbitals between neighboring atoms. This leads to the formation of continuous and allowed energy bands separated by forbidden gaps. In insulators, the forbidden gap is large, while in semiconductors it is much smaller, around 0.7-1.1 eV. Semiconductors have electrical resistivity between conductors and insulators. The document also describes how doping semiconductors with group 3 or 5 atoms creates an excess or deficiency of electrons, forming n-type or p-type materials respectively.
4th grade ch. 13 sec. 2 how do electric charges flow
Electric current is the continuous flow of electric charges through a material. It can only exist in a complete electric circuit, which provides an unbroken path for charges to flow. Conductors are materials that allow easy flow of charges, while insulators do not allow charges to move freely. Resistance measures how difficult it is for charges to flow through a material. Series circuits have one path for current, while parallel circuits have several paths and decreased resistance.
Semiconductor materials
This document discusses semiconductor materials and their properties. It introduces intrinsic and extrinsic semiconductors. Intrinsic materials like silicon, germanium, and gallium arsenide have characteristic energy band gaps and intrinsic carrier concentrations. Extrinsic materials are formed by doping intrinsic materials with impurities to create excess electrons (n-type) or holes (p-type). The document explores doping processes and how impurities donate or accept electrons to influence a material's conductivity. It also examines bonding structures and carrier mobility in various semiconductors.
02 insulators and conductors
Insulators are substances where electrons cannot move freely, causing a charge to build up on their surface. Conductors allow electrons to move freely throughout. Electricians wear insulating clothing to avoid electrocution from conducting electricity. We get more static shocks in winter because dry air is an insulator that does not remove the charges our bodies pick up, resulting in a shock when we touch a conductor like a doorknob. Airplanes are made of both conductors and insulators for safety - the surface is a conductor so lightning can pass through, while the interior uses insulators so electrons cannot reach the passenger cabin.
What's hot (20)
B.tech sem i engineering physics u ii chapter 1-band theory of solid
B.tech sem i engineering physics u ii chapter 1-band theory of solid
4th grade ch. 13 sec. 2 how do electric charges flow
4th grade ch. 13 sec. 2 how do electric charges flow
Viewers also liked
Electrical storm by karhn
An electrical conductor allows electrons to flow through it, while an insulator does not allow electricity to pass through. It is important to turn off outlets at the wall when not in use to save electricity by switching it off if it is not being used.
Electrical storm!chyna and maddie.
This document discusses electricity sources in New Zealand and ways to conserve electricity for the future. It explains that electricity comes from power stations, dams, and solar panels. The main sources are solar, wind, tidal, chemical, batteries, fuel cells, nuclear, and hydro power. It also provides tips for conserving electricity such as turning off lights and appliances when not in use. If the population increases, conservation will help ensure there is enough electricity for everyone.
Electrical storm lydia
1) The document discusses different ways to generate and save electricity in New Zealand, including using wind turbines, being mindful of energy usage, and turning off lights when not in use.
2) It also provides explanations of static electricity and how atoms are made up of tiny bits of electricity like protons, neutrons and electrons.
3) Several students wrote short pieces about art projects and experiments they did learning about electricity, including making circuits with batteries, switches and light bulbs. Safety tips are also given, such as not handling plugs or using knives near toasters.
Electricity123 anesu zadran
Conductors like copper, silver, and gold allow electrons to flow through them, while insulators like plastic and paper do not allow the passage of heat or sound. Electricity is generated at power stations and travels through pylons and wires to homes, where circuits can be completed or broken by switches to allow or prevent electron flow. Fuses break circuits if current exceeds safe levels.
Electricity storm by lynnette
The document discusses ways to save electricity, such as turning off lights and appliances when not in use. It notes that electricity is expensive if batteries are flat and must be recharged. The document also briefly describes that New Zealand's electricity comes from switches and wires, with heat coming from the sun. Tips are provided to turn off machines like TVs and computers when leaving a room to conserve energy.
Electrical lightning! by Holly
This document discusses how New Zealand can ensure a reliable supply of electricity in the future. It recommends conserving electricity at home by turning off unused lights and appliances. It also provides information on electrical concepts like circuits, conductors, insulators, and how dams produce electricity. Ensuring efficient use of electricity and developing diverse energy sources will help ensure New Zealand has enough power to meet future demand as the population grows.
Electrical Storm By Wen Seng Chen
The document discusses different methods for generating electricity, including hydropower from dams, solar power from solar panels, and wind power from wind turbines. It explains that hydropower uses water flowing through turbines to generate electricity, while solar panels use the sun's energy and wind turbines use kinetic energy from wind. It recommends increasing the use of solar panels and wind turbines to ensure sufficient electricity production in New Zealand's future, as they are cheaper methods compared to building new dams.
Electricity kyra's
This document discusses different aspects of electricity generation and conservation in New Zealand. It begins by defining AC/DC and conductors. It then lists supporting questions for an inquiry into ensuring NZ has enough electricity in the future, including how electricity gets to homes and how it can be saved. Renewable energy sources like wind, water, and solar are mentioned. Ways to conserve electricity are turning off unused lights and appliances. Dams and how they generate hydroelectricity are briefly described. The document also touches on circuits, fuses, and interesting electricity facts.
Казахстанский опыт регулирования и предупреждения социально трудовых конфликт...
Казахстанский опыт регулирования и предупреждения социально трудовых конфликтов на базе горно-металлургического комплекса. Ассоциация горно- металургических и горнодобывающих предприятий.
http://www.agmp.kz/
Electricity bomb jahneiyah
Electricity is generated through various sources like power stations, dams, and solar panels. Power stations use large turbine machines that are turned quickly by steam to generate electricity. The average person in New Zealand uses 453 kilowatt hours of electricity per year. Questions are raised about where electricity comes from in New Zealand, how it gets to homes, how to save power, and whether there will be enough electricity for a growing population.
Предложения к концепции Горного кодекса Республики Казахстан
Предложения к концепции Горного кодекса Республики Казахстан.
http://www.agmp.kz/
Fun facts about electricity by sammy and anitak
The document provides 8 tips for saving electricity and reducing energy costs at home. The tips include switching off unused fridges and dryers, hanging clothes to dry instead of using dryers, only using heated towel rails when needed, switching off appliances at the wall, closing curtains at night, washing clothes in cold water, installing efficient shower heads, and insulating water heaters. Following these tips can save between $100 to $300 per year in energy costs. The document also discusses using renewable energy sources like solar panels, wind, hydroelectric dams, and planting trees to reduce electricity usage and costs in the future as New Zealand's population grows to 5 million people by 2025.
Presentation1
This document lists the names of various pop artists and songs, boy bands and girl groups, contestants from The Voice TV show and their affiliated coaches, and judges. It provides an unsorted collection of names related to popular music, musicians, and a singing competition television program.
Viewers also liked (14)
Казахстанский опыт регулирования и предупреждения социально трудовых конфликт...
Казахстанский опыт регулирования и предупреждения социально трудовых конфликт...
Презентация "По сокращению разрешительных документов и упрощению процедур в с...
Презентация "По сокращению разрешительных документов и упрощению процедур в с...
Предложения к концепции Горного кодекса Республики Казахстан
Предложения к концепции Горного кодекса Республики Казахстан
Recently uploaded
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Recently uploaded (20)
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Electricity storm by emma and francesca
- 1. By Emma and Francesca.
- 2. Turn off the lights when you are not using them . Do not leave the frigde door open. Take a short shower instead of a long bath. Shut the curtains during hot summer days.
- 3. • Insulators are meterials that impede free flow of electrons from atom to atom.
- 4. A conductor lets the electrons flow though not like an insulator.
- 5. Electricity comes from magnets and dams. Dams make electricity from water and wind power
- 6. solar panels. dam’s. pylons . magnets. wind mills generator.
- 7. How can we make sure NZ always has enough electricity In the future ?
- 9. Static electricity can build up on us
- 10. Electricity is when electrons move from atom to atom. When you turn on the switch the electrons are moving to atom to atom.