Electrical
•Download as PPT, PDF•
1 like•1,397 views
An average of one worker is electrocuted on the job every day due to electrical hazards. The document outlines various electrical hazards like inadequate wiring, exposed live parts, overloaded circuits, and damaged tools. It explains key electrical concepts and safety requirements to prevent electrocution, shock, burns and falls from shocks. Employers must provide training and protective equipment to workers and properly install, ground, fuse and maintain electrical systems.
Report
Share
Report
Share
![Introduction ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Electrical2
kjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhj
hjhjhjhg
j'd]
gh
sj
h
agha
hadf
gafgagafdfgsdfg
sdf
g
]f
sdg
gf
dg
gagfgaag
g
ag
asg
sg
g
asg
fdf
Electrical safety
This document discusses electrical safety and hazards. It notes that electricity can cause serious injuries or death if safety precautions are not followed. The most common electrical injuries are electrical shock, electrocution, burns, and falls. Electrical hazards include exposed parts, overloaded circuits, defective insulation, improper grounding, damaged tools, overhead power lines, and wet conditions. The document provides tips for staying safe such as inspecting tools, avoiding overloads, staying away from live wires, unplugging safely, avoiding jewelry or metal near equipment, using safe work practices, receiving training, and following lockout/tagout procedures.
Electrical safety
This document discusses various electrical safety hazards and injuries. It notes that electrocution is a leading cause of workplace death among young workers. Common electrical injuries include shocks, burns, and falls. Hazards include exposed wiring, overloaded circuits, defective insulation, improper grounding, damaged tools, and wet conditions. The document provides tips for staying safe, such as inspecting cords, avoiding overloads, staying away from live wires, and receiving proper training.
Electrical Safety
This document discusses electrical safety at the office. It identifies several dangers of electricity including electrocution, shock, burns, and falls. It explains how electrical shock can occur when current passes through the body and notes that even low voltages can be hazardous. Shock from currents over 75mA can cause heart fibrillation and death. Electrical burns are also a risk and result from contact with improperly maintained or used wiring and equipment. Falls may occur if a shock victim loses control of their body while in an elevated location. The document provides numerous warnings and guidelines for safe electrical practices at the office.
Electrical Safety
This document provides information and safety tips regarding electrical safety both indoors and outdoors. It advises checking electrical cords and outlets for wear, keeping appliances away from water, using power strips safely, and unplugging appliances after use. It also outlines safety procedures for electrical fires, shocks, downed power lines, and lightning, and recommends building an emergency kit for power outages. The overall message is to be aware of potential electrical hazards and follow precautions to prevent electrical injuries or fires.
Electrical safety
This document provides information about electrical safety. It defines electricity and how it works, explaining that electricity is created by the movement of electrons and can be both natural and man-made. It then discusses electrical hazards like improper grounding, exposed wires, inadequate wiring, overhead power lines, and more. The document also outlines common electrical parameters and their effects on the human body, like electrical shock, burns, and internal injuries. Finally, it recommends safety measures for electrical work, including using personal protective equipment, ground fault circuit interrupters, and following lock-out/tag-out procedures to isolate power sources before performing work.
Electrical hazardous
Electricity is a natural and man-made energy force that is essential to modern life. Electrical hazards are one of the greatest risks on construction sites and can lead to electrocutions. Each year in the United States, over 200 workers die from electrocutions, with construction workers making up around one third of those deaths. Common electrical hazards include damaged or improper insulation, exposed electrical parts, inadequate wiring, overloaded circuits, wet conditions, and contact with overhead power lines. Workers can reduce electrical risks by properly grounding equipment, avoiding exposed wires, using extension cords and power tools appropriately, and staying clear of overhead lines. Personal protective equipment like insulating gloves and hardhats can also help prevent electrocution.
Electrical safety
Electricity poses hazards such as electric shock, burns, and fire. The human body's resistance to electricity depends on factors like dryness of skin. Different amounts of current can cause sensations, pain, muscle control loss, and even heart failure or death. Ensuring electrical safety involves understanding Ohm's law, using insulated tools, following lockout/tagout procedures, employing protective equipment, and utilizing safe work practices around energized equipment. In industrial settings like refineries and manufacturing, electrical safety is maintained through engineering, qualified personnel, proper equipment selection, and explosion-proof applications.
Recommended
Electrical2
kjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhjhj
hjhjhjhg
j'd]
gh
sj
h
agha
hadf
gafgagafdfgsdfg
sdf
g
]f
sdg
gf
dg
gagfgaag
g
ag
asg
sg
g
asg
fdf
Electrical safety
This document discusses electrical safety and hazards. It notes that electricity can cause serious injuries or death if safety precautions are not followed. The most common electrical injuries are electrical shock, electrocution, burns, and falls. Electrical hazards include exposed parts, overloaded circuits, defective insulation, improper grounding, damaged tools, overhead power lines, and wet conditions. The document provides tips for staying safe such as inspecting tools, avoiding overloads, staying away from live wires, unplugging safely, avoiding jewelry or metal near equipment, using safe work practices, receiving training, and following lockout/tagout procedures.
Electrical safety
This document discusses various electrical safety hazards and injuries. It notes that electrocution is a leading cause of workplace death among young workers. Common electrical injuries include shocks, burns, and falls. Hazards include exposed wiring, overloaded circuits, defective insulation, improper grounding, damaged tools, and wet conditions. The document provides tips for staying safe, such as inspecting cords, avoiding overloads, staying away from live wires, and receiving proper training.
Electrical Safety
This document discusses electrical safety at the office. It identifies several dangers of electricity including electrocution, shock, burns, and falls. It explains how electrical shock can occur when current passes through the body and notes that even low voltages can be hazardous. Shock from currents over 75mA can cause heart fibrillation and death. Electrical burns are also a risk and result from contact with improperly maintained or used wiring and equipment. Falls may occur if a shock victim loses control of their body while in an elevated location. The document provides numerous warnings and guidelines for safe electrical practices at the office.
Electrical Safety
This document provides information and safety tips regarding electrical safety both indoors and outdoors. It advises checking electrical cords and outlets for wear, keeping appliances away from water, using power strips safely, and unplugging appliances after use. It also outlines safety procedures for electrical fires, shocks, downed power lines, and lightning, and recommends building an emergency kit for power outages. The overall message is to be aware of potential electrical hazards and follow precautions to prevent electrical injuries or fires.
Electrical safety
This document provides information about electrical safety. It defines electricity and how it works, explaining that electricity is created by the movement of electrons and can be both natural and man-made. It then discusses electrical hazards like improper grounding, exposed wires, inadequate wiring, overhead power lines, and more. The document also outlines common electrical parameters and their effects on the human body, like electrical shock, burns, and internal injuries. Finally, it recommends safety measures for electrical work, including using personal protective equipment, ground fault circuit interrupters, and following lock-out/tag-out procedures to isolate power sources before performing work.
Electrical hazardous
Electricity is a natural and man-made energy force that is essential to modern life. Electrical hazards are one of the greatest risks on construction sites and can lead to electrocutions. Each year in the United States, over 200 workers die from electrocutions, with construction workers making up around one third of those deaths. Common electrical hazards include damaged or improper insulation, exposed electrical parts, inadequate wiring, overloaded circuits, wet conditions, and contact with overhead power lines. Workers can reduce electrical risks by properly grounding equipment, avoiding exposed wires, using extension cords and power tools appropriately, and staying clear of overhead lines. Personal protective equipment like insulating gloves and hardhats can also help prevent electrocution.
Electrical safety
Electricity poses hazards such as electric shock, burns, and fire. The human body's resistance to electricity depends on factors like dryness of skin. Different amounts of current can cause sensations, pain, muscle control loss, and even heart failure or death. Ensuring electrical safety involves understanding Ohm's law, using insulated tools, following lockout/tagout procedures, employing protective equipment, and utilizing safe work practices around energized equipment. In industrial settings like refineries and manufacturing, electrical safety is maintained through engineering, qualified personnel, proper equipment selection, and explosion-proof applications.
The issues of electrical hazards at site and steps to prevent.
Electrical hazards were discussed along with steps to prevent them. Key points included:
- Electrical hazards can cause shock, electrocution or burns and result from unsafe equipment, environments or work practices.
- Proper insulation, grounding, guarding, use of personal protective equipment and following safety practices can help prevent electrical hazards. Insulation protects against shocks by preventing contact with energized parts.
Electrical safety
This document discusses electrical safety. It begins by defining electricity and electrical concepts like electrons, atoms, and conductors versus insulators. It then discusses factors that affect electrical resistance and provides analogies to explain concepts. The document emphasizes electrical safety, listing specific safety practices like using personal protective equipment (PPE) and signage. It provides details on PPE including types of hard hats, eye protection, footwear, gloves, and body protection. Hazards like falls and fires are addressed. The document concludes by discussing first aid basics.
Construction Safety - Electrical Safety
This document discusses electrical safety on construction sites. It outlines safety requirements, hazard prevention and control, and personal protective equipment. The most frequent causes of electrical accidents are contact with power lines, lack of ground fault protection, improper use of equipment and cords. The most common injuries from electrical accidents are electrocution, shock, burns and falls. Workers must always assume overhead lines are energized and never touch downed power lines or operate equipment in water.
Electrical safety
this is basic electrical safety power point lecture that too useful for principal training non-electrical workersprevent lectrocution accidents in work place
Electrical safety slideshare
This document discusses electrical safety and the causes of electrical accidents. It notes that 15-16 people die every day in India due to electrocution. The major causes of electrical accidents are listed as carelessness, misuse, lack of training, and negligence. The document explains what causes electrical shock and the effects of electric current passing through the human body, such as muscular contraction, breathing difficulty, cardiac arrest, and death. It provides safety guidelines and regulations to prevent electrical accidents.
Electrical safety
How to work safely while working with electricity or electrical equipment. what are the safety rules to be followed? what is the safe system of work while working on electrical equipment. what kind of safety components to be used in place?
Electrical Hazards and their safety
Electrical Hazards that occurs in day-to-day life and precautions against them have been explained as far as possible.
Electrical hazards & safety training
Regards, Mr. SYED HAIDER ABBAS
MOB. +92-300-2893683 MBA in progress, NEBOSH IGC, IOSH, HSRLI, NBCS,GI,FST,FOHSW,ISO 9001, 14001,
'BS OHSAS 18001, SAI 8000, Qualified .
Lecture 8 -_electrical_hazard
Electrical hazards can cause electric shock, arc flash burns, thermal burns or blasts. Sources of electrical hazards include direct contact with energized conductors over 50V, arc flashes from live conductors, sparks from short circuits, and static electricity. Assessing electrical hazards involves determining shock boundaries, required PPE, and fault current calculations. Controls and prevention strategies include insulating live parts, guarding equipment, proper grounding, using circuit protection devices, enforcing safe work practices, and providing employee training.
Electrical safety audit in india
An electrical safety audit examines the safety of electrical installations through inquiry, inspection, testing and verification. It helps identify electrical hazards, areas of risk, and non-compliance with legislation and best practices. An audit ensures safety, longevity of equipment, compliance with regulations, and continuous safety improvements. The document provides contact information for an organization that performs electrical safety audits.
Electrical Safety Joliet Distribution Center
This document provides an overview of electrical safety. It discusses the main electrical hazards of fire, shock, and burns. It defines important electrical terms and outlines safety rules and personal protective equipment requirements for working with electricity, including inspecting cords, locking out equipment during maintenance, and proper grounding. Personal responsibilities are to follow electrical safety rules and report any electrical deficiencies.
Basic Electrical Safety by TEC
This document provides guidance on basic electrical safety. It discusses the hazards of electricity like shock and burns. It emphasizes following safe work practices when working with electricity, such as wearing personal protective equipment and locking out energized equipment. Proper training and preventing unsafe equipment, workplaces, and practices can help avoid electrical accidents.
Electrical Workplace Safety
The document discusses electrical safety practices including those outlined in NFPA 70E. It notes that electricity can cause electrocution, shock, burns, and falls. It defines key electrical terms and outlines hazards such as overhead power lines, damaged or overloaded wiring, and improper grounding. It emphasizes controlling hazards through grounding, using GFCIs and personal protective equipment, and establishing shock and arc flash boundaries.
Electrical safety potection
This document discusses various electrical safety topics such as grounding, overcurrent protection, GFCIs, proper power strip usage, bonding and grounding, and an example of electrocution due to improper equipment usage. Grounding reduces shock risk by providing an alternative current path back to the source in case of a fault. Fuses and circuit breakers protect against overheating from too much current, while GFCIs quickly shut off power if any current leaves the circuit. Power strips should only be used for electronics and not overloaded or combined with extension cords. Proper bonding and grounding of all surfaces protects against static electricity dangers. The example incident describes a fatal electrocution that occurred due to a combination of unsafe factors including using
Electrical safety
Electrical Safety. Electrical hazards can cause burns, shocks and electrocution (death). Assume that all overhead wires are energized at lethal voltages. Never assume that a wire is safe to touch even if it is down or appears to be insulated.
Electrical safety yogesh joga
This document discusses electrical safety and precautions for working with electricity. It defines key electrical terms like current, resistance, and voltage. The main electrical hazards are burns, electrocution, shock, arc flash, fire, and explosions. Precautions include inspecting tools and cords for damage, keeping cords away from heat and moisture, using lockout/tagout procedures for live equipment, wearing proper PPE like insulating gloves and blankets, and only allowing qualified personnel to install or repair electrical systems. Safety signs and barriers should also be followed to keep areas near energized equipment clear.
Electrical hazards
This document discusses electrical hazards associated with welding and cutting equipment. It provides instructions on how to avoid electric shock, including properly grounding equipment, wearing protective clothing, inspecting cables, and not working alone in hazardous conditions. It recommends using certain equipment like DC constant voltage welders in damp or cramped areas, and provides procedures for responding to electric shock incidents.
Electrical safety
This document discusses electrical safety for both industry and home. It outlines four major types of electrical injuries: electrocution, electrical shock, electrical burns, and falls. It emphasizes that only authorized employees should conduct electrical work after receiving special training. It warns of overloads causing fires and damage to tools/equipment. Exposed electrical parts, improper grounding, damaged insulation, and wet conditions are also identified as hazards. The document concludes with key safety practices for homes such as inspecting wiring, using faceplates, checking cords and gauges, avoiding daisy chaining, and not using electricity in wet areas.
Electrical safety
Electricity can cause serious injuries and death if not properly respected and safety protocols followed. There are three main electrical hazards: fires caused by overheating conductors, electrical shocks from contact with a power source, and electrical burns when enough current passes through the body. Many accidents occur due to failure to properly lockout electrical systems during maintenance, use of defective or wet equipment, and not following safe work practices such as grounding equipment and circuits. Proper safety includes never overloading circuits, staying away from unguarded conductors, inspecting cords, and using protective equipment.
Pitágoras
O Teorema de Pitágoras afirma que na soma dos quadrados dos catetos de um triângulo retângulo é igual ao quadrado da hipotenusa.
Your+Retirement +June+2004
This document summarizes a monthly retirement planning newsletter. It discusses principles of asset allocation and diversification, provides tips for lobbying an employer for improvements to retirement plans, and poses questions about buying stocks based on tips versus doing research. Key points covered include the importance of diversifying investments across different asset classes and companies, getting input from coworkers to improve retirement plan options, and the risks of making investment decisions based on hype rather than fundamentals.
Electrical
An average of one worker is electrocuted on the job every day due to electrical hazards. The document outlines various electrical hazards like inadequate wiring, exposed live parts, overloaded circuits, and damaged tools. It explains key electrical terms and safety requirements from OSHA like proper grounding, using GFCIs and circuit breakers, guarding live parts, permissible uses of flexible cords, training workers, and more to prevent electrocutions, shocks and burns. Violating these safety measures can result in injury or death from electrical accidents.
More Related Content
What's hot
The issues of electrical hazards at site and steps to prevent.
Electrical hazards were discussed along with steps to prevent them. Key points included:
- Electrical hazards can cause shock, electrocution or burns and result from unsafe equipment, environments or work practices.
- Proper insulation, grounding, guarding, use of personal protective equipment and following safety practices can help prevent electrical hazards. Insulation protects against shocks by preventing contact with energized parts.
Electrical safety
This document discusses electrical safety. It begins by defining electricity and electrical concepts like electrons, atoms, and conductors versus insulators. It then discusses factors that affect electrical resistance and provides analogies to explain concepts. The document emphasizes electrical safety, listing specific safety practices like using personal protective equipment (PPE) and signage. It provides details on PPE including types of hard hats, eye protection, footwear, gloves, and body protection. Hazards like falls and fires are addressed. The document concludes by discussing first aid basics.
Construction Safety - Electrical Safety
This document discusses electrical safety on construction sites. It outlines safety requirements, hazard prevention and control, and personal protective equipment. The most frequent causes of electrical accidents are contact with power lines, lack of ground fault protection, improper use of equipment and cords. The most common injuries from electrical accidents are electrocution, shock, burns and falls. Workers must always assume overhead lines are energized and never touch downed power lines or operate equipment in water.
Electrical safety
this is basic electrical safety power point lecture that too useful for principal training non-electrical workersprevent lectrocution accidents in work place
Electrical safety slideshare
This document discusses electrical safety and the causes of electrical accidents. It notes that 15-16 people die every day in India due to electrocution. The major causes of electrical accidents are listed as carelessness, misuse, lack of training, and negligence. The document explains what causes electrical shock and the effects of electric current passing through the human body, such as muscular contraction, breathing difficulty, cardiac arrest, and death. It provides safety guidelines and regulations to prevent electrical accidents.
Electrical safety
How to work safely while working with electricity or electrical equipment. what are the safety rules to be followed? what is the safe system of work while working on electrical equipment. what kind of safety components to be used in place?
Electrical Hazards and their safety
Electrical Hazards that occurs in day-to-day life and precautions against them have been explained as far as possible.
Electrical hazards & safety training
Regards, Mr. SYED HAIDER ABBAS
MOB. +92-300-2893683 MBA in progress, NEBOSH IGC, IOSH, HSRLI, NBCS,GI,FST,FOHSW,ISO 9001, 14001,
'BS OHSAS 18001, SAI 8000, Qualified .
Lecture 8 -_electrical_hazard
Electrical hazards can cause electric shock, arc flash burns, thermal burns or blasts. Sources of electrical hazards include direct contact with energized conductors over 50V, arc flashes from live conductors, sparks from short circuits, and static electricity. Assessing electrical hazards involves determining shock boundaries, required PPE, and fault current calculations. Controls and prevention strategies include insulating live parts, guarding equipment, proper grounding, using circuit protection devices, enforcing safe work practices, and providing employee training.
Electrical safety audit in india
An electrical safety audit examines the safety of electrical installations through inquiry, inspection, testing and verification. It helps identify electrical hazards, areas of risk, and non-compliance with legislation and best practices. An audit ensures safety, longevity of equipment, compliance with regulations, and continuous safety improvements. The document provides contact information for an organization that performs electrical safety audits.
Electrical Safety Joliet Distribution Center
This document provides an overview of electrical safety. It discusses the main electrical hazards of fire, shock, and burns. It defines important electrical terms and outlines safety rules and personal protective equipment requirements for working with electricity, including inspecting cords, locking out equipment during maintenance, and proper grounding. Personal responsibilities are to follow electrical safety rules and report any electrical deficiencies.
Basic Electrical Safety by TEC
This document provides guidance on basic electrical safety. It discusses the hazards of electricity like shock and burns. It emphasizes following safe work practices when working with electricity, such as wearing personal protective equipment and locking out energized equipment. Proper training and preventing unsafe equipment, workplaces, and practices can help avoid electrical accidents.
Electrical Workplace Safety
The document discusses electrical safety practices including those outlined in NFPA 70E. It notes that electricity can cause electrocution, shock, burns, and falls. It defines key electrical terms and outlines hazards such as overhead power lines, damaged or overloaded wiring, and improper grounding. It emphasizes controlling hazards through grounding, using GFCIs and personal protective equipment, and establishing shock and arc flash boundaries.
Electrical safety potection
This document discusses various electrical safety topics such as grounding, overcurrent protection, GFCIs, proper power strip usage, bonding and grounding, and an example of electrocution due to improper equipment usage. Grounding reduces shock risk by providing an alternative current path back to the source in case of a fault. Fuses and circuit breakers protect against overheating from too much current, while GFCIs quickly shut off power if any current leaves the circuit. Power strips should only be used for electronics and not overloaded or combined with extension cords. Proper bonding and grounding of all surfaces protects against static electricity dangers. The example incident describes a fatal electrocution that occurred due to a combination of unsafe factors including using
Electrical safety
Electrical Safety. Electrical hazards can cause burns, shocks and electrocution (death). Assume that all overhead wires are energized at lethal voltages. Never assume that a wire is safe to touch even if it is down or appears to be insulated.
Electrical safety yogesh joga
This document discusses electrical safety and precautions for working with electricity. It defines key electrical terms like current, resistance, and voltage. The main electrical hazards are burns, electrocution, shock, arc flash, fire, and explosions. Precautions include inspecting tools and cords for damage, keeping cords away from heat and moisture, using lockout/tagout procedures for live equipment, wearing proper PPE like insulating gloves and blankets, and only allowing qualified personnel to install or repair electrical systems. Safety signs and barriers should also be followed to keep areas near energized equipment clear.
Electrical hazards
This document discusses electrical hazards associated with welding and cutting equipment. It provides instructions on how to avoid electric shock, including properly grounding equipment, wearing protective clothing, inspecting cables, and not working alone in hazardous conditions. It recommends using certain equipment like DC constant voltage welders in damp or cramped areas, and provides procedures for responding to electric shock incidents.
Electrical safety
This document discusses electrical safety for both industry and home. It outlines four major types of electrical injuries: electrocution, electrical shock, electrical burns, and falls. It emphasizes that only authorized employees should conduct electrical work after receiving special training. It warns of overloads causing fires and damage to tools/equipment. Exposed electrical parts, improper grounding, damaged insulation, and wet conditions are also identified as hazards. The document concludes with key safety practices for homes such as inspecting wiring, using faceplates, checking cords and gauges, avoiding daisy chaining, and not using electricity in wet areas.
Electrical safety
Electricity can cause serious injuries and death if not properly respected and safety protocols followed. There are three main electrical hazards: fires caused by overheating conductors, electrical shocks from contact with a power source, and electrical burns when enough current passes through the body. Many accidents occur due to failure to properly lockout electrical systems during maintenance, use of defective or wet equipment, and not following safe work practices such as grounding equipment and circuits. Proper safety includes never overloading circuits, staying away from unguarded conductors, inspecting cords, and using protective equipment.
What's hot (19)
The issues of electrical hazards at site and steps to prevent.
The issues of electrical hazards at site and steps to prevent.
Viewers also liked
Pitágoras
O Teorema de Pitágoras afirma que na soma dos quadrados dos catetos de um triângulo retângulo é igual ao quadrado da hipotenusa.
Your+Retirement +June+2004
This document summarizes a monthly retirement planning newsletter. It discusses principles of asset allocation and diversification, provides tips for lobbying an employer for improvements to retirement plans, and poses questions about buying stocks based on tips versus doing research. Key points covered include the importance of diversifying investments across different asset classes and companies, getting input from coworkers to improve retirement plan options, and the risks of making investment decisions based on hype rather than fundamentals.
Electrical
An average of one worker is electrocuted on the job every day due to electrical hazards. The document outlines various electrical hazards like inadequate wiring, exposed live parts, overloaded circuits, and damaged tools. It explains key electrical terms and safety requirements from OSHA like proper grounding, using GFCIs and circuit breakers, guarding live parts, permissible uses of flexible cords, training workers, and more to prevent electrocutions, shocks and burns. Violating these safety measures can result in injury or death from electrical accidents.
Shangai China
Shanghai es la capital económica de China con más de 14 millones de habitantes. Alberga dos de los edificios más altos del país como la Oriental Pearl Tower y la Torre Jin Mao. Shanghai tiene un clima húmedo debido a su proximidad al río Yangzi y experimenta cuatro distintas estaciones.
Van Gogh Borges Piazzolla
Este documento resume las lecciones que se aprenden con el tiempo sobre el amor, las relaciones y la vida. En pocas oraciones, enseña que con el tiempo uno aprende a no depender de otros para la felicidad, a construir el presente y aceptar el pasado, y que cada experiencia e interacción es única e irrepetible.
Your Retirement April May June 2008 Newsletter
The document provides an overview of retirement planning topics including saving and investing approaches, mutual fund performance, and active vs. passive investing strategies. It discusses findings that most individual investors and mutual fund managers underperform market indexes, and that index funds have lower fees and expenses while often achieving equal or better returns than actively managed funds. The newsletter aims to give straightforward retirement planning advice and promote upcoming workshops on saving and investing for retirement.
Viewers also liked (6)
Similar to Electrical
Electrical Osha
The document discusses several electrical hazards in the workplace. It notes that on average, one worker is electrocuted each day from electrical injuries like electrocution, electrical shock, or burns. It describes how electrical shocks can occur by touching energized wires or electrical components, and outlines the risks of falls, overloads, and improper grounding. The document provides examples of OSHA electrical safety requirements regarding grounding, hand tools, guarding of live parts, and permissible uses of flexible cords.
Electrical 2
There are many electrical hazards in construction work. Electricity can easily cause harm or death through electrocution, fires or indirect injuries like falls. Proper protections include using grounded equipment, guarding live parts, closing panels, inspecting cords and wires, training workers, and locking out power sources before maintenance or repairs. Personal protective equipment like insulating gloves and footwear are also essential to prevent shocks or burns from damaged or improperly used tools and systems. Complying with electrical safety standards and focusing on prevention through planning, inspections and safe work practices can control these risks.
2014 electrical safety
Electricity is the second leading cause of death in construction, accounting for over 600 deaths annually. Proper safety procedures and equipment are required to prevent electrical accidents and injuries. Key risks include contacting energized power lines or equipment, using defective tools or cords, and failing to follow lockout/tagout procedures to de-energize circuits before working. Proper grounding, GFCI protection, insulation, and avoiding overloads are vital for electrical safety.
Electrical Safety.ppt
Electrical safety is important as electricity can cause harm and death. Some key points:
- About 5 workers are electrocuted every week and it causes 12% of young worker deaths. Only a small amount of electricity is needed to cause harm.
- Electricity is the flow of energy from a power source through a conductor, often in a closed circuit. Basic terms include voltage, current, resistance, and conductors vs insulators.
- Electrical injuries can include electrocution, shocks, burns and falls. Burns are a common injury. Internal injuries and involuntary muscle contractions are also risks.
- Hazards include improper PPE, wet/damp conditions, defective tools and equipment, loose connections, overloaded
Electrical Safety
This document covers electrical safety and provides guidance on working with electricity. It discusses how electricity travels through circuits and can harm the human body. The key risks are outlined, such as damaged cords, overhead power lines, and wet conditions. The document recommends only using equipment that is in good condition, having qualified workers perform electrical tasks, and following procedures to control hazards like locking out power sources. Proper training, protective equipment, and circuit safety devices can help reduce risks from electricity.
Electrical Safety and methods used to control accidents
This document discusses electrical safety and methods to control accidents. It identifies electrical hazards such as electric shock, burns, and arc blasts. Severity of electric shock depends on factors like current, path through the body, and exposure time. Burns can result from arc, direct contact, or ignited materials. Arc blasts produce high pressure, heat and injuries. The document outlines four methods to control hazards: electrical isolation through insulation, elevation and enclosures; equipment grounding; circuit interruption using fuses, breakers and GFCIs; and safe work practices including inspections, PPE, lockout/tagout procedures and training. Following electrical safety practices can help avoid injuries.
Electrical Safety
The document discusses electrical safety hazards and protections. It notes that on average, one worker is electrocuted each day due to electrical injuries like electrocution, shocks, burns or falls. It describes the different types of electrical hazards like inadequate wiring, exposed live parts, ungrounded systems, and overloaded circuits. The document recommends protective measures like proper grounding, using GFCIs and circuit breakers, guarding live parts, safe flexible cord use, training, and following other electrical safety requirements to prevent injuries from electrical hazards.
Basic Principles of Electrical Safety.ppt
hfoytdryixc vjl;hcyirxl;ghv jk;chiyrsx;guj mn /j;hfpui;jhv jhfuolg bjv puyv /n ;uyfvpujhcv['h ;'jhvpuh ;uy 'jK ;'yifi'hv[87rfi'b jb
Basic principles of electrical safety
This document discusses electrical safety and provides information on basic electrical principles including electricity, electric current, potential difference, conductors, resistance, and Ohm's law. It also covers safe working practices with electricity such as lock out procedures, personal protective equipment, and portable electrical equipment maintenance. Key risks from electricity like electric shock and electrical fires are explained. The document emphasizes isolating electrical sources, inspecting equipment, and using proper safety procedures to prevent accidents.
Electrical Construction Hazards - Presentation Research Material.ppt
The document discusses various electrical hazards and safety practices. It notes that about 5 workers are electrocuted every week and electricity causes 12% of young worker deaths. Some key electrical hazards mentioned include exposed live parts, defective insulation on wires, improper grounding, overloaded circuits, and damaged tools. The document provides guidance on controlling hazards such as ensuring proper grounding, using ground fault circuit interrupters, installing protective devices like fuses and circuit breakers, and following lockout/tagout procedures. It emphasizes planning work and using appropriate personal protective equipment when working with electricity.
Electrical 1
This document provides information on basic electrical safety. It outlines electrical hazards such as electrocution, shock and burns that can occur from improper use or malfunction of electrical equipment. Key safety tips include keeping a minimum distance from overhead power lines, inspecting electrical tools for damage, only resetting circuit breakers you understand, and using ground fault circuit interrupters to protect against shocks.
Lab # 01 Workshop Practice.pptx
The document discusses electrical safety, hazards, and precautions. It covers how electric current affects the body, risks from electricity, legal duties, and basic safety steps. The key points are: electric current between 1mA-16mA can cause shocks, those most at risk are maintenance and construction workers, employers have a duty to maintain safe electrical systems, and basic safety includes using the right equipment, maintenance, secure wiring, switching off tools before handling, and competent work.
ELECTRICAL SAFETY PRESENTATION.ppt
This document provides an overview of electrical safety. It discusses the purpose of electrical safety training, basic concepts of electricity, hazards recognition, effects of electricity on the human body, and hazard protection methods. It outlines work practices for using electrical tools and equipment safely, as well as responsibilities of supervisors and employees. Specific safety topics covered include inspecting cords and equipment, keeping electrical panels clear, avoiding trip hazards, locking out power sources, using personal protective equipment, and emergency response procedures. The goal is to raise awareness of electrical hazards and instruct safe work practices to prevent electrical accidents.
ElectricalSafety.ppt
Electrical safety is an important issue, as the document outlines. Each year there are thousands of electrical injuries among workers, with one worker being electrocuted each day. The basics of electricity, electrical hazards, and safety protocols to prevent injuries are discussed. Proper protection, training, and adherence to electrical safety programs and procedures by both employers and workers are key to preventing accidents and injuries from electrical sources.
fy11_sh-22249-11_ElectricalSafety.ppt
Electrical safety is an important issue, as the document outlines. Each year there are thousands of electrical injuries among workers, with one worker being electrocuted each day. The basics of electricity, electrical hazards, and protection methods are covered. Proper safety training, use of personal protective equipment, lockout/tagout procedures, and established safety programs are key to preventing injuries and fatalities from electrical accidents.
Electrical shock.ppt
Electrical safety is paramount when working with electricity. Proper lockout/tagout procedures must be followed to de-energize equipment before inspection or repair. Electrical shock can occur when a person provides a path for current to flow through their body, and even small currents above 8mA can be dangerous. It is not the voltage but the current that determines the severity of shock. Following safe work practices like using GFCIs, proper grounding and wiring, insulating tools, and wearing PPE can help prevent electrical injuries and fatalities. Planning, inspection, and training are also critical aspects of electrical safety.
electrical safety
1. Electrical safety is the 4th largest contributor to fatalities in the construction industry, with 5% of deaths due to electric shock or discharge.
2. Conductors readily allow the flow of electricity while insulators have high resistance and prevent electricity from flowing. Water and human skin are normally insulators but become conductors when wet.
3. Electric shock occurs when a person becomes part of an electrical circuit, with current entering and leaving the body. The severity of shock depends on current amount, path through the body, and time in the circuit. Effects range from tingling to cardiac arrest.
ELECTRICAL SAFETY AWARENES.pdf
The document discusses electrical safety hazards and precautions in construction. It notes that electrocutions are a leading cause of death in construction, accounting for 12% of fatalities annually. Over 30,000 non-fatal shocks also occur each year. It then defines various electrical terms and describes the types of burns, shocks, and electrocutions that can result from electrical accidents. The document outlines safety practices like lockout/tagout procedures, proper use of ground fault circuit interrupters and personal protective equipment, and safe operation of electrical tools to prevent injuries and fatalities from electricity on work sites.
Electrical safety 4.pdf
This document discusses electrical safety and hazards. It provides definitions of electrical safety as protection from dangers caused by unexpected electric hazards. It then discusses common electrical hazards like fires, shocks, burns and explosions. The document details the effects of electric current on the human body like shock, burns, arc blasts and explosions. It explains factors that determine the effects like current, voltage, resistance and duration of shock. The document concludes by listing common causes of electrical accidents like unsafe work systems and lack of training.
Electrical safety training
This document provides an overview of electrical safety training. It describes how electricity works and the risks of electrical shock and injury. Key points include:
- Electricity travels in closed circuits and shock occurs when the body becomes part of the circuit
- Electrical current can cause burns, internal injuries, and involuntary muscle contractions
- Even low voltages pose a hazard as muscular contractions may prevent releasing contact
- Ground faults are the most common type of shock, which GFCIs can help prevent
- Following safety practices like grounding equipment, avoiding power lines, and inspecting cords can help reduce electrical risks.
Similar to Electrical (20)
Electrical Safety and methods used to control accidents
Electrical Safety and methods used to control accidents
Electrical Construction Hazards - Presentation Research Material.ppt
Electrical Construction Hazards - Presentation Research Material.ppt
More from Martin Demarest
Block Producers Legal Responsibility For Iwr Breakell
The document outlines legal responsibilities and procedures for block producers regarding water repellent specification compliance. It discusses maintaining quality control programs, supplier relationships, educating customers on limitations, investigating claims of water infiltration, coordinating forensic investigations and legal counsel, and replacing blocks if needed while reserving rights. The goal is to control their own fate through thorough documentation and investigation while mitigating potential damages.
Elements Of A Masonry Forensic Investigation Ryan Biggs
Sandell Manufacturing has over 75 years of experience producing flashing systems and accessories for masonry construction. They also own Diedrich Technologies, a leader in detergent products for building restoration and maintenance. Together, they provide solutions for new masonry construction and cleaning of existing structures. Proper cleaning practices are important, such as testing cleaners first and using the mildest solution that works, and never using muriatic acid which can damage masonry.
Diedrich Chemicals [Read Only]
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Nyscma Electrical Safety 11 6 08 Ralph Viola
1) The document outlines electrical safety procedures for a concrete block plant, including ensuring power lines are properly located and protected, that electrical panels and disconnects are labeled and organized, and that lockout/tagout procedures are followed for equipment maintenance.
2) Proper troubleshooting procedures require training and protective equipment like arc suits to safely work on energized systems.
3) A lockout/tagout program is established to isolate energy sources before maintenance to prevent accidental startups that could injure workers. Signage, organization, and inspections help maintain electrical safety.
High Voltage Proximity Act National Grid
The High Voltage Proximity Act (HVPA) is a New York statute that prohibits unqualified workers from working in dangerous proximity to high voltage electric lines without adequate protection. It establishes guidelines for notifying utilities and taking safety precautions when work will be done near power lines. The HVPA defines dangerous proximity as within 10 feet of lines over 600 volts or greater distances set by safety regulations. It requires worker training, notification of utilities before such work, and safety measures like de-energization or clearance approval by the utility.
Elements Of A Masonry Forensic Investigation Ryan Biggs
The document discusses the key elements of conducting a forensic investigation of masonry, including:
1) Why an investigation is needed to understand the reality of any issues versus perceptions, and when it's appropriate to initiate one.
2) Choosing an experienced investigator who can conduct non-destructive testing using tools like ultrasonics, thermography, and radar to evaluate the masonry in an unbiased manner.
3) What to expect from the investigation process, including reviewing documents, visual observations, testing, and a final report of findings.
Block Producers Legal Responsibility For Iwr Breakell
The document outlines legal responsibilities and procedures for block producers regarding water repellent specification compliance. It discusses maintaining quality control programs, supplier relationships, educating customers on limitations, investigating claims of water infiltration, coordinating forensic investigations and legal counsel, and replacing blocks if needed while reserving rights. The goal is to control their own fate through thorough documentation and investigation while mitigating potential damages.
Keeping It In The Family Resnick Associates
The document summarizes a presentation given by Terrance Resnick on business succession and estate planning. It discusses how inefficient succession planning is a leading cause of family businesses failing between the first and second generation. It provides a checklist of issues that should be addressed in a business succession plan and highlights common mistakes made, such as relying solely on an "I love you will" that leaves everything to a spouse.
Chrishuckabee1
The presentation was given by Chris Huckabee to the New York State Architects Institute and was sponsored by the New York State Concrete Masonry Association. Concrete masonry is a building material that can be used for walls, foundations, and other structural elements in construction projects. The presentation discussed the benefits and applications of using concrete masonry in architectural design and construction.
Your+Retirement Nov+2004+Newsletter3
The document summarizes key principles for retirement saving and investing, including that there is no such thing as risk-free investing. It discusses options for withdrawing retirement funds, how today's employees are saving and investing for retirement, and provides homework on comparing retirement fund performance to the top 10 funds. The newsletter aims to provide straightforward retirement planning education and resources.
More from Martin Demarest (10)
Block Producers Legal Responsibility For Iwr Breakell
Block Producers Legal Responsibility For Iwr Breakell
Elements Of A Masonry Forensic Investigation Ryan Biggs
Elements Of A Masonry Forensic Investigation Ryan Biggs
Elements Of A Masonry Forensic Investigation Ryan Biggs
Elements Of A Masonry Forensic Investigation Ryan Biggs
Block Producers Legal Responsibility For Iwr Breakell
Block Producers Legal Responsibility For Iwr Breakell
Recently uploaded
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
How to Buy an Engagement Ring.pcffbhfbfghfhptx
Dive into this presentation and learn about the ways in which you can buy an engagement ring. This guide will help you choose the perfect engagement rings for women.
Negotiation & Presentation Skills regarding steps in business communication, ...
Business Communication & presentation Skills, Negotiation Skills
Innovative Uses of Revit in Urban Planning and Design
Discover innovative uses of Revit in urban planning and design, enhancing city landscapes with advanced architectural solutions. Understand how architectural firms are using Revit to transform how processes and outcomes within urban planning and design fields look. They are supplementing work and putting in value through speed and imagination that the architects and planners are placing into composing progressive urban areas that are not only colorful but also pragmatic.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Garments ERP Software in Bangladesh _ Pridesys IT Ltd.pdf
Pridesys Garments ERP is one of the leading ERP solution provider, especially for Garments industries which is integrated with
different modules that cover all the aspects of your Garments Business. This solution supports multi-currency and multi-location
based operations. It aims at keeping track of all the activities including receiving an order from buyer, costing of order, resource
planning, procurement of raw materials, production management, inventory management, import-export process, order
reconciliation process etc. It’s also integrated with other modules of Pridesys ERP including finance, accounts, HR, supply-chain etc.
With this automated solution you can easily track your business activities and entire operations of your garments manufacturing
proces
Cover Story - China's Investment Leader - Dr. Alyce SU
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambarRecently uploaded (20)
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
Negotiation & Presentation Skills regarding steps in business communication, ...
Negotiation & Presentation Skills regarding steps in business communication, ...
Innovative Uses of Revit in Urban Planning and Design
Innovative Uses of Revit in Urban Planning and Design
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Garments ERP Software in Bangladesh _ Pridesys IT Ltd.pdf
Garments ERP Software in Bangladesh _ Pridesys IT Ltd.pdf
Cover Story - China's Investment Leader - Dr. Alyce SU
Cover Story - China's Investment Leader - Dr. Alyce SU
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Electrical
- 1. Electrical
- 16. Some Examples of OSHA Electrical Requirements . . . .
- 23. Permissible Uses of Flexible Cords Examples Pendant, or Fixture Wiring Portable lamps, tools or appliances Stationary equipment-to facilitate interchange
- 24. Prohibited Uses of Flexible Cords Examples Substitute for fixed wiring Run through walls, ceilings, floors, doors, or windows Concealed behind or attached to building surfaces
Editor's Notes
- This presentation is designed to assist trainers conducting OSHA 10-hour General Industry outreach training for workers. Since workers are the target audience, this presentation emphasizes hazard identification, avoidance, and control – not standards. No attempt has been made to treat the topic exhaustively. It is essential that trainers tailor their presentations to the needs and understanding of their audience. This presentation is not a substitute for any of the provisions of the Occupational Safety and Health Act of 1970 or for any standards issued by the U.S. Department of Labor. Mention of trade names, commercial products, or organizations does not imply endorsement by the U.S. Department of Labor.