Ehs induction
•Download as PPTX, PDF•
1 like•164 views
I
ISMREHS stands for Environment, Health, and Safety. EHS programs attempt to identify, assess, and control workplace hazards to protect employee and public health and safety as well as the environment. A safety committee represents employees and aims to provide a safe workplace. The roles of the safety committee include hazard identification, reviewing safety precautions and incidents, ensuring training, and regulatory compliance through activities like inspections and analyzing safety metrics. Employees must report all accidents/incidents, know emergency procedures like evacuation routes, and first aid resources.
Report
Share
Report
Share
Recommended
Visitors SHE Induction Presentation 2016
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Process safety managment
Process safety aims to prevent incidents involving hazardous materials that could endanger workers, property, and the environment. It involves applying engineering and operating practices to control hazards. Key elements of process safety management include process hazard analysis, operating procedures, employee participation, training, contractor management, pre-startup safety reviews, mechanical integrity programs, emergency response planning, compliance audits, and incident investigation. The goal is to anticipate, identify, evaluate, and control hazards to protect people and prevent accidents.
HSE-INDUCTION-TRAINING.ppt
This document provides an overview of safety policies and procedures for Fairdeal QHSE. It defines key safety terms and outlines responsibilities for management, supervisors, and employees to ensure a safe work environment and prevent accidents. Specific safety topics covered include personal protective equipment, housekeeping, electrical safety, fire prevention, lifting techniques, confined spaces, and prohibited behaviors. Management is responsible for training and safety compliance, while employees must follow safety rules and report any issues or injuries. Non-compliance may result in disciplinary actions up to termination.
Construction safety pocket guide osha3252
This document discusses hazards and solutions for various safety issues in the construction industry. It addresses common hazards like falls, trench collapses, scaffolding failures, electrocutions, and more. For each hazard, it provides 2-3 potential solutions, such as using fall protection equipment, properly sloping trenches, inspecting scaffolding, and establishing lockout/tagout procedures for electrical work. The purpose is to educate construction workers about workplace dangers and how to prevent injuries and fatalities through safe practices.
Hse presentation general rev.00 may 2014
HSE Management System can help you manage health, safety and environment ; it’s your decision whether to use one or not.
Risk Assessment in a Workplace Transport /Risk assessment for a road haulage ...
Prepared by Tarun Kumar Cheddy
Risk Assessment in a Workplace Transport For Risk assessment Module
Risk assessment for a road haulage company
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Incident investigation and Root Cause Analysis
This Presentation review the steps to take during an incident Investigation as well as a 10 step process for the root cause analysis.
Recommended
Visitors SHE Induction Presentation 2016
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Process safety managment
Process safety aims to prevent incidents involving hazardous materials that could endanger workers, property, and the environment. It involves applying engineering and operating practices to control hazards. Key elements of process safety management include process hazard analysis, operating procedures, employee participation, training, contractor management, pre-startup safety reviews, mechanical integrity programs, emergency response planning, compliance audits, and incident investigation. The goal is to anticipate, identify, evaluate, and control hazards to protect people and prevent accidents.
HSE-INDUCTION-TRAINING.ppt
This document provides an overview of safety policies and procedures for Fairdeal QHSE. It defines key safety terms and outlines responsibilities for management, supervisors, and employees to ensure a safe work environment and prevent accidents. Specific safety topics covered include personal protective equipment, housekeeping, electrical safety, fire prevention, lifting techniques, confined spaces, and prohibited behaviors. Management is responsible for training and safety compliance, while employees must follow safety rules and report any issues or injuries. Non-compliance may result in disciplinary actions up to termination.
Construction safety pocket guide osha3252
This document discusses hazards and solutions for various safety issues in the construction industry. It addresses common hazards like falls, trench collapses, scaffolding failures, electrocutions, and more. For each hazard, it provides 2-3 potential solutions, such as using fall protection equipment, properly sloping trenches, inspecting scaffolding, and establishing lockout/tagout procedures for electrical work. The purpose is to educate construction workers about workplace dangers and how to prevent injuries and fatalities through safe practices.
Hse presentation general rev.00 may 2014
HSE Management System can help you manage health, safety and environment ; it’s your decision whether to use one or not.
Risk Assessment in a Workplace Transport /Risk assessment for a road haulage ...
Prepared by Tarun Kumar Cheddy
Risk Assessment in a Workplace Transport For Risk assessment Module
Risk assessment for a road haulage company
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Incident investigation and Root Cause Analysis
This Presentation review the steps to take during an incident Investigation as well as a 10 step process for the root cause analysis.
Construction Site Safety
The document outlines 9 steps to ensure safety at a construction site as described by Sailesh Mahimtura. The steps are: 1) know the site thoroughly, 2) train all personnel about site safety, 3) mark unsafe and hazardous materials, 4) inspect equipment to ensure it is working properly, 5) use harnesses and safety equipment for roof and scaffold work, 6) provide personal protective equipment, 7) ensure Occupational Safety and Health Administration standards are met, 8) prepare for emergencies, and 9) barricade the site after working hours. Following these steps can help maintain safety at the risky construction environment.
EHS induction Presentation slides
This site induction presentation provides essential health and safety information for personnel working on an construction project to build a university building. It outlines the site location and operating hours, management team and emergency procedures, welfare facilities, site rules that must be followed, significant hazards, requirements for housekeeping, first aid and accident reporting, fire safety procedures, and types of fire extinguishers. The presentation emphasizes that attending induction and following all procedures are compulsory for all personnel working on the site.
Toolbox Talk
Toolbox talks are short daily safety discussions between supervisors and employees lasting 5-10 minutes. They address a specific safety topic for the day's scheduled work activities and potential hazards. Toolbox talks provide an opportunity for supervisors to emphasize safety concerns and procedures, and for employees to ask questions. Discussing actual and anticipated safety issues helps workers understand how to perform their jobs safely.
Scaffolding safety training.ppt
This document provides information on scaffold safety training. It aims to improve participants' skills in scaffolding safety requirements and transfer technical knowledge about scaffolding safety practices. The objectives are to make participants familiar with international scaffolding standards, scaffold components, hazards of erecting and dismantling scaffolds, and roles and responsibilities of scaffold supervisors. It also discusses common causes of scaffolding disasters and accidents, as well as personal protective equipment requirements.
Health & Safety Induction Training
This PowerPoint presentation provides information about health and safety policies and responsibilities at Bridgwater College. It outlines the overall responsibility of the board of governors, principal, managers, staff, and health and safety manager. It details staff responsibilities and provides information on first aid procedures, fire safety, driving policies, and the college's commitment to safeguarding individuals and promoting health and well-being. The presentation is intended to inform college staff about relevant health and safety practices and policies.
Safe work-at-heights-presentation
Falls from heights are a major cause of injuries and fatalities. This document outlines regulations and best practices for working safely at heights. It defines fall hazards and introduces a new five-level hierarchy of controls. The highest levels involve eliminating falls or using passive fall prevention devices. Lower levels like ladders should only be used as a last resort. The document provides examples of common fall hazards and injuries in the department and recommends control measures like staying off roofs and using long-handled tools to access high areas instead of ladders whenever possible.
Leadership and safety culture
This document discusses leadership and safety culture. It begins by outlining the objectives of exploring concepts of leadership and how they can be applied to workplace health and safety. It then discusses what leadership is not, such as power, status, authority, or management. True leadership shapes culture and influences performance outcomes. As a safety leader, visible commitment and leadership in the field are keys to achieving safety success. The document provides tools for safety leaders, including understanding behavior using the ABC model, influencing others positively through RAS questions, and leading effective toolbox talks. It emphasizes that safety leaders must lead by example, recognize workers, and inspire others to behave safely.
Comprehensive Employee Safety Orientation Presentation
This document provides an orientation on general workplace safety rules and procedures. It covers topics such as bloodborne pathogens, personal protective equipment, electrical safety, emergency actions, fire prevention, chemical safety, accident reporting, ergonomics, personal hygiene, and each employee's personal responsibility for safety. The orientation emphasizes following safety guidelines and properly wearing protective gear specific to each job. It also stresses the importance of reporting any accidents, injuries, or unsafe conditions to supervisors.
Health and safety powerpoint complete (1)
This presentation provides an overview of environmental health and safety topics for employees. It begins by explaining the importance of safety training and responsibilities of both employers and employees. It then covers a range of safety issues including vehicle safety, driving hazards, office ergonomics, fire safety, hazardous materials, and more. The document emphasizes that safety is a shared responsibility and provides contact information for the environmental health and safety committee.
TBT on Working at Height.ppt
This document discusses work at height safety. It defines work at height as any work performed more than 6 feet above the ground. It provides examples of work at height including construction, maintenance, and scaffolding work. The document outlines several fall hazards and control measures that should be implemented when working at height, such as using fall protection equipment like harnesses and lifelines, installing guardrails and covers over floor openings, following permitting procedures, and providing fall protection training to workers.
Safety at Construction SIte
Health and safety is one of the most important considerations you should take before any construction project gets underway. You should always make sure that all aspects of health and safety have been considered before you step foot on the construction site. Health and safety in construction are particularly important because the industry is prone to hazardous situations and can be dangerous at times.This can lead to a huge loss in working hours and also mean that workers are unhappy within their job roles. There are some major reasons why health and safety is important in the workplace.
Free Coshh training
C.O.S.H.H (Control of Substances Hazardous to Health) aims to protect workers from risks to their health from hazardous substances. It requires identifying substance hazards and managing risks through proper protective equipment, training, storage, and handling. The document outlines hazard symbols, responsibilities, and best practices for safely using chemicals including only using approved substances, following instructions, properly storing and disposing of chemicals, and responding to accidents.
Health safety induction_overview
This document provides an overview of health and safety policies and procedures for an organization. It outlines roles and responsibilities, key risks to be aware of, fire evacuation procedures, and what to do in the event of an emergency. Employees and learners are responsible for working safely, reporting any issues, and knowing who to contact for assistance. Managers must ensure safety policies are followed and that staff have the proper training and equipment to perform their roles safely.
Chemical and equipment safety training
This document provides guidance on best practices for chemical and equipment safety in the workplace. It discusses the importance of scheduled maintenance to prevent equipment breakdowns and injuries. It also explains what a Safety Data Sheet (SDS) is and why it is important for understanding the hazards of chemicals. The document provides tips for proper chemical handling and storage, use of protective equipment, safe lifting techniques, limiting disease spread, and preventing common injuries like slips, strains, and falls.
Health and Safety Policies
A Health and Safety Policy is a written document of a company's goals and commitment to workplace health and safety and addresses the health and safety needs of a company.
Tool box talks
This document provides guidelines for conducting effective toolbox talks to maintain a safety education program in the construction industry. Key recommendations include scheduling regular weekly meetings no longer than 15 minutes, preparing topics in advance, encouraging participation and discussion, holding meetings in quiet locations conducive to learning, focusing exclusively on relevant safety matters, using visual aids when possible, documenting meetings with synopses and signatures, and discussing incidents and planned work in terms of hazards and prevention rather than individuals.
Hse apex manual
This document provides the Health, Safety and Environmental (HSE) Management Manual for Consolidated Construction Consortium Ltd. (CCCL). It outlines CCCL's HSE management system, which is in compliance with OHSAS 18001 and ISO 14001 standards. The manual covers CCCL's HSE policy, planning, implementation, operation, monitoring and corrective action processes. It also includes the organization profile, objectives, responsibilities and documentation requirements of the HSE management system.
Control of Substances Hazardous to Health
COSHH outlines what constitutes a hazardous substance and the requirements for controlling exposure and protecting health. Hazardous substances include those classified as dangerous to health, substances with occupational exposure limits, biological agents, and dusts above specified concentrations. Excluded are asbestos, lead, radioactive, explosive or flammable substances which have separate regulations. A risk assessment must identify hazardous substances, those at risk, evaluate risks, record findings and review controls. Exposure must be prevented, substituted or controlled through engineering controls, isolation, ventilation, work method changes, PPE, housekeeping and training. Controls must be properly used, maintained, defects reported, and exposure monitored for certain substances. Health surveillance is required for significant exposure or exposure linked to
Health and Safety Policies
A written Occupational Health and Safety Policy helps to promote an effective workplace OHS Programme
Safety while sandblasting
http://sandblaster-parts.com/?gclid=CNSIx_2P-cQCFQSUfgodjxIAWA | Safety is critical in any field, but especially a key factor of importance for sandblasting jobs. Our presentations will teach you how to protect yourself from harm on the job.
When people don’t want to follow safety
In a company we would all like to think folks would like to learn about Health and safety but if you dont want to then you can learn about THANATOLOGY and what take place for those who dont!
OH service.ppt
This document defines occupational safety and health and outlines seven primary principles. It discusses identifying problems related to agents of injury, humans, and the environment that could impact safety. Best practices for occupational safety and health management include written safety policies, training programs, inspections, and encouraging a safety culture. Compliance with minimum OSHA standards is important but industry best practices aim to exceed standards and proactively ensure worker safety.
More Related Content
What's hot
Construction Site Safety
The document outlines 9 steps to ensure safety at a construction site as described by Sailesh Mahimtura. The steps are: 1) know the site thoroughly, 2) train all personnel about site safety, 3) mark unsafe and hazardous materials, 4) inspect equipment to ensure it is working properly, 5) use harnesses and safety equipment for roof and scaffold work, 6) provide personal protective equipment, 7) ensure Occupational Safety and Health Administration standards are met, 8) prepare for emergencies, and 9) barricade the site after working hours. Following these steps can help maintain safety at the risky construction environment.
EHS induction Presentation slides
This site induction presentation provides essential health and safety information for personnel working on an construction project to build a university building. It outlines the site location and operating hours, management team and emergency procedures, welfare facilities, site rules that must be followed, significant hazards, requirements for housekeeping, first aid and accident reporting, fire safety procedures, and types of fire extinguishers. The presentation emphasizes that attending induction and following all procedures are compulsory for all personnel working on the site.
Toolbox Talk
Toolbox talks are short daily safety discussions between supervisors and employees lasting 5-10 minutes. They address a specific safety topic for the day's scheduled work activities and potential hazards. Toolbox talks provide an opportunity for supervisors to emphasize safety concerns and procedures, and for employees to ask questions. Discussing actual and anticipated safety issues helps workers understand how to perform their jobs safely.
Scaffolding safety training.ppt
This document provides information on scaffold safety training. It aims to improve participants' skills in scaffolding safety requirements and transfer technical knowledge about scaffolding safety practices. The objectives are to make participants familiar with international scaffolding standards, scaffold components, hazards of erecting and dismantling scaffolds, and roles and responsibilities of scaffold supervisors. It also discusses common causes of scaffolding disasters and accidents, as well as personal protective equipment requirements.
Health & Safety Induction Training
This PowerPoint presentation provides information about health and safety policies and responsibilities at Bridgwater College. It outlines the overall responsibility of the board of governors, principal, managers, staff, and health and safety manager. It details staff responsibilities and provides information on first aid procedures, fire safety, driving policies, and the college's commitment to safeguarding individuals and promoting health and well-being. The presentation is intended to inform college staff about relevant health and safety practices and policies.
Safe work-at-heights-presentation
Falls from heights are a major cause of injuries and fatalities. This document outlines regulations and best practices for working safely at heights. It defines fall hazards and introduces a new five-level hierarchy of controls. The highest levels involve eliminating falls or using passive fall prevention devices. Lower levels like ladders should only be used as a last resort. The document provides examples of common fall hazards and injuries in the department and recommends control measures like staying off roofs and using long-handled tools to access high areas instead of ladders whenever possible.
Leadership and safety culture
This document discusses leadership and safety culture. It begins by outlining the objectives of exploring concepts of leadership and how they can be applied to workplace health and safety. It then discusses what leadership is not, such as power, status, authority, or management. True leadership shapes culture and influences performance outcomes. As a safety leader, visible commitment and leadership in the field are keys to achieving safety success. The document provides tools for safety leaders, including understanding behavior using the ABC model, influencing others positively through RAS questions, and leading effective toolbox talks. It emphasizes that safety leaders must lead by example, recognize workers, and inspire others to behave safely.
Comprehensive Employee Safety Orientation Presentation
This document provides an orientation on general workplace safety rules and procedures. It covers topics such as bloodborne pathogens, personal protective equipment, electrical safety, emergency actions, fire prevention, chemical safety, accident reporting, ergonomics, personal hygiene, and each employee's personal responsibility for safety. The orientation emphasizes following safety guidelines and properly wearing protective gear specific to each job. It also stresses the importance of reporting any accidents, injuries, or unsafe conditions to supervisors.
Health and safety powerpoint complete (1)
This presentation provides an overview of environmental health and safety topics for employees. It begins by explaining the importance of safety training and responsibilities of both employers and employees. It then covers a range of safety issues including vehicle safety, driving hazards, office ergonomics, fire safety, hazardous materials, and more. The document emphasizes that safety is a shared responsibility and provides contact information for the environmental health and safety committee.
TBT on Working at Height.ppt
This document discusses work at height safety. It defines work at height as any work performed more than 6 feet above the ground. It provides examples of work at height including construction, maintenance, and scaffolding work. The document outlines several fall hazards and control measures that should be implemented when working at height, such as using fall protection equipment like harnesses and lifelines, installing guardrails and covers over floor openings, following permitting procedures, and providing fall protection training to workers.
Safety at Construction SIte
Health and safety is one of the most important considerations you should take before any construction project gets underway. You should always make sure that all aspects of health and safety have been considered before you step foot on the construction site. Health and safety in construction are particularly important because the industry is prone to hazardous situations and can be dangerous at times.This can lead to a huge loss in working hours and also mean that workers are unhappy within their job roles. There are some major reasons why health and safety is important in the workplace.
Free Coshh training
C.O.S.H.H (Control of Substances Hazardous to Health) aims to protect workers from risks to their health from hazardous substances. It requires identifying substance hazards and managing risks through proper protective equipment, training, storage, and handling. The document outlines hazard symbols, responsibilities, and best practices for safely using chemicals including only using approved substances, following instructions, properly storing and disposing of chemicals, and responding to accidents.
Health safety induction_overview
This document provides an overview of health and safety policies and procedures for an organization. It outlines roles and responsibilities, key risks to be aware of, fire evacuation procedures, and what to do in the event of an emergency. Employees and learners are responsible for working safely, reporting any issues, and knowing who to contact for assistance. Managers must ensure safety policies are followed and that staff have the proper training and equipment to perform their roles safely.
Chemical and equipment safety training
This document provides guidance on best practices for chemical and equipment safety in the workplace. It discusses the importance of scheduled maintenance to prevent equipment breakdowns and injuries. It also explains what a Safety Data Sheet (SDS) is and why it is important for understanding the hazards of chemicals. The document provides tips for proper chemical handling and storage, use of protective equipment, safe lifting techniques, limiting disease spread, and preventing common injuries like slips, strains, and falls.
Health and Safety Policies
A Health and Safety Policy is a written document of a company's goals and commitment to workplace health and safety and addresses the health and safety needs of a company.
Tool box talks
This document provides guidelines for conducting effective toolbox talks to maintain a safety education program in the construction industry. Key recommendations include scheduling regular weekly meetings no longer than 15 minutes, preparing topics in advance, encouraging participation and discussion, holding meetings in quiet locations conducive to learning, focusing exclusively on relevant safety matters, using visual aids when possible, documenting meetings with synopses and signatures, and discussing incidents and planned work in terms of hazards and prevention rather than individuals.
Hse apex manual
This document provides the Health, Safety and Environmental (HSE) Management Manual for Consolidated Construction Consortium Ltd. (CCCL). It outlines CCCL's HSE management system, which is in compliance with OHSAS 18001 and ISO 14001 standards. The manual covers CCCL's HSE policy, planning, implementation, operation, monitoring and corrective action processes. It also includes the organization profile, objectives, responsibilities and documentation requirements of the HSE management system.
Control of Substances Hazardous to Health
COSHH outlines what constitutes a hazardous substance and the requirements for controlling exposure and protecting health. Hazardous substances include those classified as dangerous to health, substances with occupational exposure limits, biological agents, and dusts above specified concentrations. Excluded are asbestos, lead, radioactive, explosive or flammable substances which have separate regulations. A risk assessment must identify hazardous substances, those at risk, evaluate risks, record findings and review controls. Exposure must be prevented, substituted or controlled through engineering controls, isolation, ventilation, work method changes, PPE, housekeeping and training. Controls must be properly used, maintained, defects reported, and exposure monitored for certain substances. Health surveillance is required for significant exposure or exposure linked to
Health and Safety Policies
A written Occupational Health and Safety Policy helps to promote an effective workplace OHS Programme
Safety while sandblasting
http://sandblaster-parts.com/?gclid=CNSIx_2P-cQCFQSUfgodjxIAWA | Safety is critical in any field, but especially a key factor of importance for sandblasting jobs. Our presentations will teach you how to protect yourself from harm on the job.
What's hot (20)
Comprehensive Employee Safety Orientation Presentation
Comprehensive Employee Safety Orientation Presentation
Similar to Ehs induction
When people don’t want to follow safety
In a company we would all like to think folks would like to learn about Health and safety but if you dont want to then you can learn about THANATOLOGY and what take place for those who dont!
OH service.ppt
This document defines occupational safety and health and outlines seven primary principles. It discusses identifying problems related to agents of injury, humans, and the environment that could impact safety. Best practices for occupational safety and health management include written safety policies, training programs, inspections, and encouraging a safety culture. Compliance with minimum OSHA standards is important but industry best practices aim to exceed standards and proactively ensure worker safety.
Bizsafe Risk Assessment
bizSAFE is a 5-step programme administered by the Ministry of Manpower and Workplace Safety and Health Council (WSHC).
Bizsafe risk assessment
bizSAFE is a 5-step programme administered by the Ministry of Manpower and Workplace Safety and Health Council (WSHC).
Basic safety introduction
This document provides an overview of industrial safety presented by Snehal Parmar. It begins with introducing the speaker and their topics. The presentation covers celebrating World Day for Safety and Health at Work on April 28th, basic definitions of industrial safety, and statistics on workplace accidents worldwide and in India. Key topics discussed include Dormer Pramet's EHS policy, identifying workplace hazards and risks, conducting risk assessments, developing a hazard control hierarchy, and using personal protective equipment. The goal is to raise awareness of industrial safety issues and best practices.
Understanding And Complying With
This presentation summarises the key regulations of the WSH Act, Singapore. And provides pragmatic advice about how employers can comply with them.
Topic 01 - Introduction.pptx
This document provides an overview of safety, health, and environmental legislation. It defines key terms like health, safety, environment, and legislation. It describes the four main causes of accidents as not seeing hazards, not thinking about risks, not knowing safety procedures, and not asking questions. It also outlines the elements of successful management practices for safety including planning, organization, control, monitoring, and review. Finally, it discusses hazard identification, risk assessment, and why risk management is important for protecting workers and improving business operations.
Safetyandhealthppt 100225223746-phpapp01
The document discusses health, safety, and security in the workplace. It defines these terms and explains their importance. Several types of accidents and their causes are described. Accident prevention methods include identifying risks, safety training, inspections, and record keeping. The Occupational Safety and Health Act of 1970 established requirements for employers to ensure workplace safety. Effective safety management involves leadership, employee involvement, data analysis, motivation, and innovation. Preventive health programs aim to reduce risks and encourage healthy lifestyles.
Principles of Occupational Safety and Health.pptx
This slides can help the students lecturers and alla academic people who want to know about occupational health and safety
Style textile
This document discusses occupational safety, health, and the environment in Pakistan. It begins with an introduction stating that safety is an unexplored frontier in Pakistan and only receives lip service in most companies. It then discusses the importance of safety as the fourth requirement for living beings.
The document outlines objectives for health, safety, and environmental programs. Health objectives include reducing occupational diseases, maintaining acceptable noise levels, and minimizing respiratory illnesses. Safety objectives and programs aim to qualify employees in first aid and emergency response. Environmental objectives seek to properly treat waste and limit pollution.
Interview segments provide perspectives from managers on their safety standards, waste disposal procedures, and needs for improved medical facilities. Overall, the document evaluates current safety practices and outlines
Ehs management issues& challenges safety
This document discusses various issues related to environment, health, and safety management. It covers topics like process safety, occupational health, safety management, hazards identification, risk assessment, safety standards and regulations, accident analysis, safety training, and benefits of occupational health and safety management systems. The key aspects of developing a proactive safety culture in organizations are also highlighted.
Irs + due diligence train the trainer
This document provides an overview of the Internal Responsibility System (IRS) in Canada. It discusses:
- The IRS is the philosophy underlying occupational health and safety legislation, founded on all workers sharing responsibility for their own and coworkers' safety.
- Under the IRS, workers are responsible for identifying hazards and reporting them if not fixed themselves, while supervisors are accountable for addressing reported issues. Monitoring includes work refusals, health and safety committees, and inspections.
- Employers must establish health and safety programs and training, as well as appoint supervisors, while workers must follow safety rules and report hazards. Meeting minimum legal requirements does not ensure workplace safety.
Practice Occupational Health and Safety Procedures.pptx
This document discusses occupational health and safety (OHS) procedures, including defining key terms like hazards, risks, and contingency measures. It explains that workplaces should implement OHS to ensure worker safety. Hazards are potential sources of harm, while risks are possibilities of being harmed from a hazard. Common steps to manage health and safety are hazard identification, risk assessment, and risk control. The document provides examples of hazards and appropriate contingency measures to include in OHS procedures.
How To Create An Occupational Health Unit
A presentation on the need for an occupational health unit with a case study on creating one in Maritime Administration and Regulatory Agencies
Workplace safety
Workplace safety aims to ensure the health and safety of employees. It involves hazard prevention through rules, regulations, training and safety culture. Ensuring workplace safety is important to prevent accidents and illnesses, promote employee health and longevity, and avoid property and life losses. It requires planning through developing policies and programs to identify and reduce risks in order to create a safe and healthy work environment for all.
Staff safety hand book
This document provides an introduction and contents for a health and safety training. The introduction discusses how accidents can cause suffering and how all hazardous situations must be identified and corrected. It emphasizes employees' responsibility to comply with health and safety requirements.
The contents section lists 28 topics that will be covered in the training, including health and safety policies, duties and responsibilities, personal protective equipment, permits to work, first aid, and fire prevention. The training aims to help employees fulfill their obligation to work safely.
Employability & Personal Development - Introduction to Health & Safety Awaren...
Employability & Personal Development - Introduction to Health & Safety Awareness in the Workplace talks about the different regulations of Health & Safety in the workplace/learning environment.
It covers RIDDOR, First Aid, PPE, Risk Assessments and general Health & Safety.
Pathway Group is a training provider that covers the courses of several different sectors. If you would like to learn more about the training that we offer at Pathway Group please call: 0121 707 0550 or e-mail: info@pathwaygroup.co.uk
Basic Safety Officer's Course
The document outlines the objectives, content, and responsibilities of a safety officer training course. The key objectives are to improve safety performance, provide safety officers with required qualifications, and remove any who do not meet standards. The content covers topics like roles and duties, hazards, risk assessment, and incident investigation. Responsibilities of safety officers include identifying unsafe acts/conditions, ensuring a safe work environment, assisting with incident reporting, and advising on safety practices and compliance. The course aims to equip attendees with the skills needed to fulfill their duties as safety officers.
Health & safety management system in indian construction
The document discusses health and safety management systems for construction companies in India. It covers key aspects of health and safety laws and rights for employees, including an employer's duty to provide training and a safe working environment. It also discusses accident reporting procedures and compensation. Case studies on two major Indian construction companies (Unitech and Adani Group) are provided that describe their health and safety policies and certification to international standards like ISO.
Muhammad Azhar.. CV1
The applicant is applying for an open position. He has 8 years of experience in various engineering roles related to projects, safety, environment, and health. He holds several certifications in areas like occupational health and safety, quality management, and environmental management. He is seeking to utilize his technical and experience to contribute to environmental compliance and sustainability.
Similar to Ehs induction (20)
Practice Occupational Health and Safety Procedures.pptx
Practice Occupational Health and Safety Procedures.pptx
Employability & Personal Development - Introduction to Health & Safety Awaren...
Employability & Personal Development - Introduction to Health & Safety Awaren...
Health & safety management system in indian construction
Health & safety management system in indian construction
Recently uploaded
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge EducationGlobal Landscapes Forum (GLF)
Presented by Feri Johana at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyENVIRONMENT~ Renewable Energy Sources and their future prospects.
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...Global Landscapes Forum (GLF)
Presented by Sonya Dewi at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyOptimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Recycling and Disposal on SWM Raymond Einyu pptx
Increasing urbanization, rural–urban migration, rising standards of living, and rapid development associated with population growth have resulted in increased solid waste generation by industrial, domestic and other activities in Nairobi City. It has been noted in other contexts too that increasing population, changing consumption patterns, economic development, changing income, urbanization and industrialization all contribute to the increased generation of waste.
With the increasing urban population in Kenya, which is estimated to be growing at a rate higher than that of the country’s general population, waste generation and management is already a major challenge. The industrialization and urbanization process in the country, dominated by one major city – Nairobi, which has around four times the population of the next largest urban centre (Mombasa) – has witnessed an exponential increase in the generation of solid waste. It is projected that by 2030, about 50 per cent of the Kenyan population will be urban.
Aim:
A healthy, safe, secure and sustainable solid waste management system fit for a world – class city.
Improve and protect the public health of Nairobi residents and visitors.
Ecological health, diversity and productivity and maximize resource recovery through the participatory approach.
Goals:
Build awareness and capacity for source separation as essential components of sustainable waste management.
Build new environmentally sound infrastructure and systems for safe disposal of residual waste and replacing current dumpsites which should be commissioned.
Current solid waste management situation:
The status.
Solid waste generation rate is at 2240 tones / day
collection efficiently is at about 50%.
Actors i.e. city authorities, CBO’s , private firms and self-disposal
Current SWM Situation in Nairobi City:
Solid waste generation – collection – dumping
Good Practices:
• Separation – recycling – marketing.
• Open dumpsite dandora dump site through public education on source separation of waste, of which the situation can be reversed.
• Nairobi is one of the C40 cities in this respect , various actors in the solid waste management space have adopted a variety of technologies to reduce short lived climate pollutants including source separation , recycling , marketing of the recycled products.
• Through the network, it should expect to benefit from expertise of the different actors in the network in terms of applicable technologies and practices in reducing the short-lived climate pollutants.
Good practices:
Despite the dismal collection of solid waste in Nairobi city, there are practices and activities of informal actors (CBOs, CBO-SACCOs and yard shop operators) and other formal industrial actors on solid waste collection, recycling and waste reduction.
Practices and activities of these actor groups are viewed as innovations with the potential to change the way solid waste is handled.
CHALLENGES:
• Resource Allocation.
在线办理(lboro毕业证书)拉夫堡大学毕业证学历证书一模一样
学校原件一模一样【微信：741003700 】《(lboro毕业证书)拉夫堡大学毕业证学历证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland managementGlobal Landscapes Forum (GLF)
Presented by Jan Peters at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and ActionImproving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Overview of the Global Peatlands Assessment
Presented by Patrick Scheel at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Peatlands of Latin America and the Caribbean
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Promoting Multilateral Cooperation for Sustainable Peatland management
Presented by Agus Julianto on GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably
Global Peatlands Map and Hotspot Explanation Atlas
Presented by Alexandra Barthelmes at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Climate Change All over the World .pptx
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Wildlife-AnIntroduction.pdf so that you know more about our environment
All about wildlife, if you are fond of animals and wildlife then do follow us for more content like this
Recently uploaded (20)
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge Education
world-environment-day-2024-240601103559-14f4c0b4.pptx
world-environment-day-2024-240601103559-14f4c0b4.pptx
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland management
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...
Promoting Multilateral Cooperation for Sustainable Peatland management
Promoting Multilateral Cooperation for Sustainable Peatland management
Global Peatlands Map and Hotspot Explanation Atlas
Global Peatlands Map and Hotspot Explanation Atlas
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies.
Wildlife-AnIntroduction.pdf so that you know more about our environment
Wildlife-AnIntroduction.pdf so that you know more about our environment
Ehs induction
- 2. Environment Health & Safety – EHS © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 2 EHS stands for Environment, Health, and Safety. It’s a general term used to refer to laws, rules, regulations, professions, programs, and workplace efforts to protect the health and safety of employees and the public as well as the environment from hazards associated with the workplace. Let’s start by looking at those three letters E, H, and S and determining what they mean. • E stands for Environment. We’re talking about things like environmental releases and spills here. • H stands for Health. We’re talking about things that can make you ill here, like airborne particulates, biological pathogens, and radiation, and/or things that can harm you as a result of exposure, such as noise. • S stands for Safety. We’re talking about things that can cause injuries here, such as getting caught in a moving machine or being run over by a forklift. .
- 3. Safety Committee © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 3 Safety committee is an integral part of the organization's operating procedures. It aims for the provision of a safe, healthy workplace for employees working in an organization Safety committee in organization represent a group of employees. EHS programs at the workplace programs attempt to identify, assess, and control hazards at work as well as train workers about the hazards and how to work in a safe and health manner, protecting their safety and health, the safety and health of others in the workplace, and the safety, health, and environmental conditions in their larger community
- 4. Roles & Responsibility of each employee towards safety © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 4 Organization defines the role of the safety committee. • Hazard involved with the activity which you perform & safety precautions needs to be taken? • Participation in Hazard identification and Risk assessment • Review & monitoring the established safety precautions & rules • Review and investigation of near misses, unsafe conditions and acts • PPE management & enforcement • Status for Health and Safety concerns with the activity effectiveness actions taken • Safety suggestions & audit results. Running the safety and health management program • Performing job hazard analyses • Ensure that environmental, health, and safety training is delivered • Ensure EHS regulatory compliance • Performing worksite walkthroughs and safety observations actions taken • Gather and analyze EHS leading and lagging indicators • Improve human and operational performance
- 5. Hazard Identification and Risk Assessment © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 5
- 6. Accident Incident © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 6 Report all accidents Incidents at work area immediately
- 7. What We must know about location © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 7 • Where is the Emergency exit ? • Where is the Safe Assembly Zone? • Where is the first aid box is stationed? • How to guide for medical emergencies? • Where are emergency contact numbers placed? • Who is the single point of contact from EHS? • Where are the fire extinguishers placed at your work areas ? • Who are the ERT members
- 8. Initiatives © 2017 Jones Lang LaSalle IP, Inc. All rights reserved. 8
- 9. © 2018 Jones Lang LaSalle IP, Inc. All rights reserved. 9 Lakshmi Kantha