This document discusses the supply, commissioning, and testing of a 3000 kW turbine for a concentrated solar power plant owned by Atria Power Corporation. The turbine runs on solar energy and generates 3000 kW of power at 415 V and 50 Hz to feed into the local grid. It is an extraction-cum-condensing turbine with a turbine inlet pressure of 34 bar(g) and temperature of 350 degrees C. Using the turbine is expected to generate annual savings of $1.8 million and pay for itself within one year, while also providing environmental benefits like reduced carbon emissions.
Alexander Richter, Marketing Manager, Green Energy Geothermal
Iceland Geothermal Conference 2018 - Breaking the Barriers
24 - 27 April, 2018, Harpa, Reykjavík
A business model for implementing Green Energy solutions like solar power in Gawad Kalinga communities. This presentation is created as a recommendation for Gawad Kalinga.
Energy management and cost optimization using solar energy Sudipta Ambal
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution. To reduce our daily to daily increasing electricity bill cost. Creating economic development and jobs in manufacturing, installation, etc.
Oem business presentation introduction jan 2017Dan Nadav
Qnergy is growing its OEM business where innovative companies design and manufacture advanced solutions based on our maintenance-free Generator. For further details please contact us at info@qnergy.com or at +1 775 247 1316.
Photovoltaic Review -Fraunhofer Institute for Solar Energy System ISE Ashish Verma
It give the wide spectrum of Solar PV market, Technology share ,Installed capacity in various region ,material per Wp cost ,Inverter Cost and many more information about Solar PV industry .
Project Proposal on 10 MW Solar PV Power PlantVignesh Sekar
By installing and successfully operating 10 MW photovoltaic (PV) power plants will deliver electricity for consumption by the owners, the relevant peoples in the project assessment place will be made aware of the technical and economic potential of solar power generation. Furthermore, the power required from the public grid will be reduced, and overall expenditure on electric power will be lowered & our project aims to create the necessary awareness among the population, and especially among policy-makers and large investors, Youngsters.....
Rotor is an very important part in the machines,especially in the rotating machines like gas and steam turbines. In this paper steam turbine rotor is analysed by using finite elements. In the complex systems, many of the engineering problems, it is difficult to solve the problem by closed form or exact solution method. Then we have to go for some numerical/approximate method for solving the problem. There are lot of numerical/approximate methods available.
Design Optimization and Analysis of a Steam Turbine Rotor GroovesIOSR Journals
A large variety of turbo-machinery rotor groove geometries are used in industry. However, there is
no specific attempt made to compare them on the basis of performance. This paper provides an attempt to fill
that gap aiming to find an optimum geometry. The main objective of the investigations is to reduce fillet stress
concentration factor and associated deformations. The present work carries out the design modification of fillet
of a Steam Turbine Rotor. Finite Element Analysis is performed using ANSYS Workbench that is used to
determine the fillet stresses effectively to modify the blade rotor grooves. The low pressure steam turbine rotor
blades have usually a history of stress failure. They suffer from tensile and bending stresses partly due to the
centrifugal force as a result of high rotational speeds and partly due to high pressure, temperature and speed
steam loading. The centrifugal force is one of the problems that face the designers of turbine blades especially
the long ones. The designer always aims at reducing these stresses. One way to do so is by the reduction of
stress concentration factor which takes place between the rotor and its groove. That is to make the rotor blade
of variable cross section instead of straight. This paper presents the method of reducing stress concentration
factor as well as reduction in the deformation of the rotor
Alexander Richter, Marketing Manager, Green Energy Geothermal
Iceland Geothermal Conference 2018 - Breaking the Barriers
24 - 27 April, 2018, Harpa, Reykjavík
A business model for implementing Green Energy solutions like solar power in Gawad Kalinga communities. This presentation is created as a recommendation for Gawad Kalinga.
Energy management and cost optimization using solar energy Sudipta Ambal
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution. To reduce our daily to daily increasing electricity bill cost. Creating economic development and jobs in manufacturing, installation, etc.
Oem business presentation introduction jan 2017Dan Nadav
Qnergy is growing its OEM business where innovative companies design and manufacture advanced solutions based on our maintenance-free Generator. For further details please contact us at info@qnergy.com or at +1 775 247 1316.
Photovoltaic Review -Fraunhofer Institute for Solar Energy System ISE Ashish Verma
It give the wide spectrum of Solar PV market, Technology share ,Installed capacity in various region ,material per Wp cost ,Inverter Cost and many more information about Solar PV industry .
Project Proposal on 10 MW Solar PV Power PlantVignesh Sekar
By installing and successfully operating 10 MW photovoltaic (PV) power plants will deliver electricity for consumption by the owners, the relevant peoples in the project assessment place will be made aware of the technical and economic potential of solar power generation. Furthermore, the power required from the public grid will be reduced, and overall expenditure on electric power will be lowered & our project aims to create the necessary awareness among the population, and especially among policy-makers and large investors, Youngsters.....
Rotor is an very important part in the machines,especially in the rotating machines like gas and steam turbines. In this paper steam turbine rotor is analysed by using finite elements. In the complex systems, many of the engineering problems, it is difficult to solve the problem by closed form or exact solution method. Then we have to go for some numerical/approximate method for solving the problem. There are lot of numerical/approximate methods available.
Design Optimization and Analysis of a Steam Turbine Rotor GroovesIOSR Journals
A large variety of turbo-machinery rotor groove geometries are used in industry. However, there is
no specific attempt made to compare them on the basis of performance. This paper provides an attempt to fill
that gap aiming to find an optimum geometry. The main objective of the investigations is to reduce fillet stress
concentration factor and associated deformations. The present work carries out the design modification of fillet
of a Steam Turbine Rotor. Finite Element Analysis is performed using ANSYS Workbench that is used to
determine the fillet stresses effectively to modify the blade rotor grooves. The low pressure steam turbine rotor
blades have usually a history of stress failure. They suffer from tensile and bending stresses partly due to the
centrifugal force as a result of high rotational speeds and partly due to high pressure, temperature and speed
steam loading. The centrifugal force is one of the problems that face the designers of turbine blades especially
the long ones. The designer always aims at reducing these stresses. One way to do so is by the reduction of
stress concentration factor which takes place between the rotor and its groove. That is to make the rotor blade
of variable cross section instead of straight. This paper presents the method of reducing stress concentration
factor as well as reduction in the deformation of the rotor
DESIGN AND ANALYSIS OF STEAM TURBINE BLADE AND SHAFT ASSEMBLYIjripublishers Ijri
rotary motion. A system of angled and shaped blades arranged on a rotor through which steam is passed to generate
rotational energy. Moving fluid acts on the blades so that they move and impart rotational energy to the rotor.
The blades are designed in such a way to produce maximum rotational energy by directing the flow of the steam along
its surface. The blades are made at specific angles in order to incorporate the net flow of steam over it in its favour.
The blades may be of stationary or fixed and rotary or moving types, and shaft is designed to work in extreme conditions,
hear it has to bear the temperature which is coming from the steam and loads (weight and centrifugal force) of
the blades assembly and other assembly parts.
Utilizing solar+storage to obviate natural gas peaker plants Clean Coalition
The Clean Coalition was a partner organization for the Grid-Scale Storage Conference, which took place on June 6-7, 2018 in San Francisco, CA. Executive Director Craig Lewis presented at the event.
John Dilliott, Manager, Energy & Utilities, UC San Diego
Emerging energy generation and storage technologies for renewable energy sources: How do we generate, store, manage and distribute energy efficiently and effectively?
Decarbonising Australia’s Electricity Supply: The role for Small Modular Reac...Ben Heard
I delivered this presentation to the Australian Frontiers in Science conference in late 2012. This presentation makes the case for the important role of Small Modular Reactors (SMR) in the decarbonisation of Australia electricity
Feasibility Assessment: Proposed B.C. LNG Facilities and Renewable PowerClean Energy Canada
Navius Research Inc. and Steve Davis & Associates produced a conceptual design for powering the LNG terminal on the North Coast that would maximize renewables at its production facility and do so reliably, affordably and on schedule—using established commercial technologies. Further, doing so reduces that plant’s carbon pollution by 45 percent, its air emissions - nitrogen oxides - by 70 percent and increases local permanent jobs by 40 percent. The cost for all these benefits? A 1 percent increase in projected sales price of the LNG.
Combined Heat and Power Generation - Commercial Energy Efficiency with Cogene...The Brewer-Garrett Company
www.brewer-garrett.com
Best practices in combined heat and power (CHP) promote commercial energy efficiency. Presented by energy services company Brewer-Garrett.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
