Oem business presentation introduction jan 2017
•
1 like•570 views
Qnergy is growing its OEM business where innovative companies design and manufacture advanced solutions based on our maintenance-free Generator. For further details please contact us at info@qnergy.com or at +1 775 247 1316.
Report
Share
Report
Share
Download to read offline
Recommended
Prevailing Energy Investor Presentation 3 6909
The document is an investor presentation for Prevailing Energy Inc (PEI), which is developing a vertical axis wind turbine generator (VAWTG) as an alternative to traditional horizontal axis wind turbines. It outlines challenges with current technologies, how PEI's solution addresses them, the market opportunity, and a proposed funding timeline to commercialize the VAWTG technology.
Steinbeis 1MW Grid Connected System design report
This report summarizes the design of a 1 megawatt grid-connected solar photovoltaic system in Hyderabad, India. The location was selected due to its high annual solar irradiation of 5.32 kWh/m2/day. Canadian Solar CS6P-260PX polycrystalline solar modules and two 500 kW ABB PVS800 central inverters were selected as the primary components. System simulations showed the system would produce 894 kW of maximum power and have an 80.1% performance ratio. Eight combiner boxes were also selected to connect the 22 module strings in parallel to each inverter.
New Wave EXECUITIVE PRESENTATION KHPP
The document proposes an investment project to generate hydrokinetic power using a system that combines pressurized water and air to create mechanical movement and inertia to power generators, providing pollution-free electricity continuously. It describes 5MW, 40MW and 100MW power plant systems that require small plots of land and use neodymium magnet generators to produce electricity at competitive costs with quick returns on investment. Contact information is provided for Jean M Lacroix, the CEO, regarding additional details on the hydrokinetic power technology.
Leaflet Plug&Sun and Plug&Sun+ EN
The document describes Plug&Sun systems, which are fully integrated solar energy solutions for off-grid and poor grid applications ranging from 1 kW to 1 MW. The systems use concentrated photovoltaic modules from Soitec that are 32% efficient and use dual-axis tracking to reduce energy losses compared to standard photovoltaic panels. The Plug&Sun systems provide clean, efficient electricity for various uses with no fuel consumption, noise, or carbon dioxide emissions.
IRJET - Recovery of Energy from Exhaust Air of Textile Industry with the ...
1) The document describes a project to recover energy from exhaust air of textile industries using a vertical axis wind turbine (VAWT).
2) It aims to reduce dependence on non-renewable energy sources by utilizing the kinetic energy of exhaust air, which is currently wasted.
3) The team will analyze exhaust air characteristics, design an optimized duct to increase velocity, and integrate a Savonius-type VAWT coupled with a generator to convert the energy to electricity.
ESCO Contracting - CII Danfoss, Chennai Aug 2017
This document summarizes an energy efficiency case study by Aspiration Cleantech Ventures for one of their automotive component manufacturing clients. Currently, the client uses kerosene to provide process heat between 85-90°C for cleaning components. Aspiration proposes installing a 186 kW heat pump to provide this heat more efficiently. Using the heat pump would save the client Rs. 6.55 crores over 10 years in fuel costs compared to continuing with kerosene. The summary outlines the client's current energy usage and costs, the technical specifications of the proposed heat pump solution, and the expected economic and environmental benefits of switching to the more efficient technology.
Roofsol Energy - O&M Presentation
Roofsol provides following preventive maintenance services
- Regular Cleaning of Solar Panels
- Frequent Maintenance of Thermal Based Components
- Yearly Service of HT Side Equipment
- Diagnostic Testing for Lower Power Production
- Circuit Testing
- IV Curve Tracking
- Thermal Imaging
- Earth Value Measurement
- Retro Commissioning
- Data Acquisition System Check
- Automatic String Level Visual Alarms
- Real Time Data Collection
- Monitoring Energy Production (Daily Basis)
- Effective Data Interpretation
- Solar Resources Management and Prediction
- PV Monitoring System
- Trending and Analytics for Continuous Improvement
- Critical and Non-Critical Reactive Repairs
- Spare Parts and Inventory Management
Digital Wind Farm
GE's Digital Wind Farm is a product portfolio that uses GE's newest 2.0-2.4MW wind turbines, predictive analytics software, and performance optimization controls to improve the energy output of a wind farm by up to 20% over previous technologies. The Digital Wind Farm leverages site-specific turbine configurations, predictive maintenance through real-time data collection, and power optimization controls to maximize wind farm output and reduce operating costs over the lifetime of the project. GE's Digital Wind Farm represents the next evolution of wind energy through integrated hardware, software, and analytics solutions.
Recommended
Prevailing Energy Investor Presentation 3 6909
The document is an investor presentation for Prevailing Energy Inc (PEI), which is developing a vertical axis wind turbine generator (VAWTG) as an alternative to traditional horizontal axis wind turbines. It outlines challenges with current technologies, how PEI's solution addresses them, the market opportunity, and a proposed funding timeline to commercialize the VAWTG technology.
Steinbeis 1MW Grid Connected System design report
This report summarizes the design of a 1 megawatt grid-connected solar photovoltaic system in Hyderabad, India. The location was selected due to its high annual solar irradiation of 5.32 kWh/m2/day. Canadian Solar CS6P-260PX polycrystalline solar modules and two 500 kW ABB PVS800 central inverters were selected as the primary components. System simulations showed the system would produce 894 kW of maximum power and have an 80.1% performance ratio. Eight combiner boxes were also selected to connect the 22 module strings in parallel to each inverter.
New Wave EXECUITIVE PRESENTATION KHPP
The document proposes an investment project to generate hydrokinetic power using a system that combines pressurized water and air to create mechanical movement and inertia to power generators, providing pollution-free electricity continuously. It describes 5MW, 40MW and 100MW power plant systems that require small plots of land and use neodymium magnet generators to produce electricity at competitive costs with quick returns on investment. Contact information is provided for Jean M Lacroix, the CEO, regarding additional details on the hydrokinetic power technology.
Leaflet Plug&Sun and Plug&Sun+ EN
The document describes Plug&Sun systems, which are fully integrated solar energy solutions for off-grid and poor grid applications ranging from 1 kW to 1 MW. The systems use concentrated photovoltaic modules from Soitec that are 32% efficient and use dual-axis tracking to reduce energy losses compared to standard photovoltaic panels. The Plug&Sun systems provide clean, efficient electricity for various uses with no fuel consumption, noise, or carbon dioxide emissions.
IRJET - Recovery of Energy from Exhaust Air of Textile Industry with the ...
1) The document describes a project to recover energy from exhaust air of textile industries using a vertical axis wind turbine (VAWT).
2) It aims to reduce dependence on non-renewable energy sources by utilizing the kinetic energy of exhaust air, which is currently wasted.
3) The team will analyze exhaust air characteristics, design an optimized duct to increase velocity, and integrate a Savonius-type VAWT coupled with a generator to convert the energy to electricity.
ESCO Contracting - CII Danfoss, Chennai Aug 2017
This document summarizes an energy efficiency case study by Aspiration Cleantech Ventures for one of their automotive component manufacturing clients. Currently, the client uses kerosene to provide process heat between 85-90°C for cleaning components. Aspiration proposes installing a 186 kW heat pump to provide this heat more efficiently. Using the heat pump would save the client Rs. 6.55 crores over 10 years in fuel costs compared to continuing with kerosene. The summary outlines the client's current energy usage and costs, the technical specifications of the proposed heat pump solution, and the expected economic and environmental benefits of switching to the more efficient technology.
Roofsol Energy - O&M Presentation
Roofsol provides following preventive maintenance services
- Regular Cleaning of Solar Panels
- Frequent Maintenance of Thermal Based Components
- Yearly Service of HT Side Equipment
- Diagnostic Testing for Lower Power Production
- Circuit Testing
- IV Curve Tracking
- Thermal Imaging
- Earth Value Measurement
- Retro Commissioning
- Data Acquisition System Check
- Automatic String Level Visual Alarms
- Real Time Data Collection
- Monitoring Energy Production (Daily Basis)
- Effective Data Interpretation
- Solar Resources Management and Prediction
- PV Monitoring System
- Trending and Analytics for Continuous Improvement
- Critical and Non-Critical Reactive Repairs
- Spare Parts and Inventory Management
Digital Wind Farm
GE's Digital Wind Farm is a product portfolio that uses GE's newest 2.0-2.4MW wind turbines, predictive analytics software, and performance optimization controls to improve the energy output of a wind farm by up to 20% over previous technologies. The Digital Wind Farm leverages site-specific turbine configurations, predictive maintenance through real-time data collection, and power optimization controls to maximize wind farm output and reduce operating costs over the lifetime of the project. GE's Digital Wind Farm represents the next evolution of wind energy through integrated hardware, software, and analytics solutions.
Eni new energy pakistan
Eni Bhit Gas Field is located 180 km north of Karachi in the Kirthar region of Pakistan. The gas field forms the boundary between the lower Indus plain to the east and Baluchistan to the west. The region receives a favorable sun irradiation through most of the year.
Ect kraft-paper
The document discusses the installation of a 550 kW energy conservation turbine (ECT) at a paper manufacturing plant in the United Arab Emirates. The ECT was installed in 2006 parallel to the steam header to recover energy from throttling steam. It generates 550 kW of power from 20 tons per hour of steam and saves the plant over $530,000 per year in energy costs. Over the turbine's 15-year lifespan, the total capital savings are estimated to be $7.9 million. The project achieved a payback period of less than one year and provides environmental benefits like reduced carbon emissions and improved process efficiency.
6 F.01 Technology update for customers
This document provides an overview of GE's 6F.01 gas turbine technology. It discusses the product's evolution from the 6C gas turbine, its modular design, validation testing, commercial operations including over 110,000 operating hours and 99.2% reliability. The 6F.01 is positioned as offering F-class efficiency at 50MW block sizes for combined cycle and cogeneration applications.
Gravitricity Ltd
Gravitricity is developing a gravity-based energy storage system using disused mine shafts. The system can provide rapid, durable, and low-cost grid-scale energy storage to support the global transition to renewable energy. Gravitricity is raising £500,000 to fund a 250kW demonstration project and expand their team to develop a 4MW prototype. They are seeking this seed funding from angel investors and strategic partners to unlock £650,000 in UK government innovation funding and advance their gravity-based storage technology.
2010 deep research report on global and china cigs thin film solar cell industry
This document provides a 210-page research report on the global and Chinese CIGS thin film solar cell industry from 2010. It includes profiles of over 20 CIGS manufacturers worldwide and details on their production capacities, module efficiencies, costs, profit margins, and expansion plans from 2009-2014. The report also analyzes the CIGS manufacturing process, equipment suppliers, market demand and supply, as well as the feasibility of building a new 50MW CIGS thin film solar cell project in China. Key findings are that CIGS module efficiency increased from 10% in 2008 to 12% in 2009 and production costs fell to around $0.8/Watt for some manufacturers.
Wind Energy's Future and the Impact on U.S. Manufacturing
Wind Energy's Future and the Impact on U.S. Manufacturing presentation at Ports-to-Plains Alliance Energy Conference in Washington DC on April 26, 2013.
Solar Energy Assessment Report for 100 kWp of Bengaluru, Karnataka created by...
Solar Energy Assessment Report for 100 kWp of Bengaluru, Karnataka created by Ezysolare. For more SEAR reports, Visit http://solardesign.ezysolare.com/
Florida Residential Going Green
BlueChip Energy™ provides solar energy solutions for numerous types of solar projects for residential, commercial, government, and utility applications. Striving to help our customers reduce their carbon footprint and claim their energy independence, BlueChip Energy™ is here to make a difference.
Solar thermal energy. Parabolic trough collectors
Abengoa counts on its own solar thermal
technology and is a world leader in the construction
of this type of plant, with 1.7 GW of installed
capacity representing 34 % of the worldwide
production of solar thermal energy.
Storelectric
The document discusses the problem of intermittent renewable energy sources and the need for large-scale, long duration electricity storage. It presents Storelectric's solution of using compressed air energy storage within underground salt caverns. This technology, called thermal energy storage CAES, can store enough electricity to power Europe for a week and has round trip efficiencies of 62-70%, making it more efficient and lower cost than existing large-scale storage options like pumped hydro. Each large plant could replace a conventional power station and support increasing renewable penetration onto the grid.
How to Solve Your Energy Problems with ADI Solar Plants
Alternative Designs Inc. (ADI) develops sustainable energy technologies to address intermittency issues with renewable energy. ADI's patented dual shell Stirling engine delivers 25 kilowatts of power and their solar collection dish improves solar collection efficiency. ADI also has a patented calcium hydride energy storage system that stores excess renewable energy for use after sunset. ADI is seeking $15 million in initial funding to construct a 100 kW pilot plant to demonstrate their technologies and help transition to commercialization.
ORC Heat-to-Power Systems: Thoughts on Codes, Standards and Regulations
2nd Meeting of the ASME IGTI ORC Power Systems Committee; Technical Subcommittee on Standards and Regulations; ASME Turbo Expo 2014; CCD Congress Center; Dusseldorf, Germany; Tuesday June 13, 2014; 5 - 8 PM CET
On-grid PV Opportunities in University Campuses: A case study at Nazarbayev U...
The universities around the world are taking every day a more decisive role in fighting global warming. Indeed,
many campuses are not only teaching established and disrupting clean energy technologies, but also are practicing
their lectures. For example, the University of Arizona, USA, leads the campuses with 28 MW of installed On-Grid
PV systems (http://www.aashe.org/resources/campus-solar-photovoltaic-installations/top10/). Furthermore,
campuses of emerging universities, as Nazarbayev University (NU), located in Astana, Kazakhstan, which is
developing with the firm aim to become a leader world class research university in the heart of Eurasia, are taking
this commitment as well. Additionally, being Kazakhstan the host of EXPO-2017 which has the motto: ¨Future
Energy¨, it is natural to evaluate if NU campus would be a good candidate to support and exhibit, with demonstrated
technical and economic advantages, its own On-Grid PV in-campus system. Therefore, in this investigation, a
feasibility study of installing PV panels on the rooftop of School of Engineering at NU is carried out. A 24 kWp rooftop
PV installation with a 14.7% capacity factor, capable to export 31 MWh of electricity to the grid per year, is assumed
to be the system for the purpose of this analysis. The financial analysis has a horizon of 20-year lifetime and 25%
debt ratio financed at 15% interest over 20 years. Selection of appropriate equipment and calculation of financial
outcomes under three different scenarios or policy options are presented. The policies or scenarios corresponded
to having or not government grants (GG) and having attractive Feed-in-Tariff (FIT) rates in order to determine their
financial benefits. The GG scenario was stretched up to consider 30% of the total project cost and FIT was varied
from current offered FIT rate by KEGOC (Kazakhstan utility company) of 36,410 KZT/MWh to a more attractive rate
of 70,000 KZT/MWh. Results demonstrate that current scenario of FIT is marginally favorable (IRR on Equity: 15.1%,
Benefit-Cost Ratio: 1.37, Equity Payback: 8.8 years), while the 30% of incentives on top of current FIT moderatedly
improves the benefits of the project (IRR on Equity: 20.9%, Benefit-Cost Ratio: 1.47, Equity Payback: 7.2 years).
Nevertheless, upgrading current FIT to 70,000 KZT/MWh, even without incentives, proved to be enough to
dramatically improve the outcome of the project for investors (IRR-Equity > 28%, Equity Payback of 5 years and
Benefit-Cost ratio > 3.6), demonstrating that with a subtle change in policies, Nazarbayev University as many other
campuses in the country, may easily justify the investment in their On-Grid PV systems and therefore, become part
of the “green” universities in the world with direct contribution to tackle climate change.
Masterfilter
Masterfilter solves a major maintenance issue for offshore wind turbines by extending the life of gearboxes. Gearboxes currently fail at an alarming rate due to contaminants in the lubricant. Masterfilter keeps gearboxes in serviceable condition for a vastly extended period by removing water and hard particulates from the lubricant, preventing damage. The company is seeking £185,000 in funding to complete third party testing and initial deployment of its filtration system.
Solibro_GmbH_company_presentation_2015-08_Rev04_EN_04
Solibro is a manufacturer of CIGS thin-film solar modules located in Germany. It is part of the Hanergy renewable energy group and has over 145 MW of annual module production capacity. Solibro develops its CIGS technology through research facilities in Germany and Sweden, and produces high-efficiency glass-glass modules through its manufacturing plant. It provides turnkey solutions for CIGS thin-film solar farms and has numerous commercial and utility-scale installations across Europe.
Power LifeMax* - Solutions for B/E Gas Turbine Fleet
- GE has over 40 years of experience with B/E gas turbine technology and has installed over 3,000 units globally totaling over 224 GW of power.
- GE offers Power LifeMax solutions to maximize the performance and value of mature gas turbine fleets, including the Advanced Gas Path and 9E Max upgrades.
- The Advanced Gas Path upgrade improves heat rate by 1.5% for combined cycle and 1.7% for simple cycle while increasing output by 3.8% for combined cycle and 3.6% for simple cycle. It has over 29,000 fired hours of experience across 8 units.
- The 9E Max upgrade further improves performance with a 6% reduction to combined cycle heat rate
Stationary/Transportation Heat-to-Power Applications with CN300 ORC Technololgy
ASME Turbo Expo 2014
Exhibitor Presentation Stage
CCD Congress Center | Düsseldorf, Germany
Keith D. Patch | ORC Product Manager
Concepts NREC (CN)
Tuesday, June 17, 2014, 3:15 PM CET
28% of the world’s total energy use is wasted but Is potentially recoverable
Can recover 144 GWe of electrical power from this waste heat, worth US$359B (at US$2,500/kWe)
World geothermal potential is 148 GWe
World biomass potential is 25 GWe
World solar thermal potential is 25 GWe
Natural energy + waste heat markets: 342 GWe or US$854B
An Organic Rankine Cycle (ORC) heat-to-power system is best suited for making electricity from these low-grade heat sources, using an organic fluid to match the fluid’s properties with the temperature of the heat source.
영문=10mw. fiji
The document proposes a 10MW solar plant project in Fiji. It discusses the project structure, location in Suba area of vatukoula, key parties involved, and financing. The proposal provides details on the solar modules, inverters, mounting systems, monitoring systems, and profitability analysis. It estimates the project will generate 14,454 MWh per year and have an IRR of 8-11% and equity IRR of 18-22% over the 20-year project period.
Ironman bibliography
Tony Stark created the Iron Man suit after being kidnapped and forced to build weapons. He used the suit to escape and later became a superhero with abilities like strength, flight, and shooting rays from his wrists. The document also notes that the author would most like to have Iron Man's ability to fly so they could travel quickly between places and because flying seems enjoyable.
8.ucl 05 oct 2009
This document discusses modelling non-Newtonian fluid flow through porous media. It defines Newtonian and non-Newtonian fluids, describes various rheological models including time-independent, viscoelastic, and time-dependent behaviors. It also discusses different modelling methodologies like continuum, bundle of capillaries, and network modelling approaches. Network modelling accounts for physics at the pore level and is computationally affordable. The document outlines strategies for modelling time-independent, viscoelastic, and time-dependent non-Newtonian fluid flow through pore networks.
Minuto, Anthony RESUME,2017
Anthony Minuto has over 20 years of experience in food operations and plant management. He has held positions such as Executive Chef, President, Director of QA/QC Process Technology, Director of R&D/Corporate Chef, and Plant Manager. Minuto has a proven track record of driving cost savings, quality excellence, and sales growth. He is skilled in food safety certifications, process improvements, and workforce training.
Classificação do turismo operador-tur
O documento classifica a indústria do turismo em tipos de serviços prestados, incluindo alojamento, transporte, agências de viagens e empresas de animação. Também descreve os operadores turísticos que combinam diferentes serviços em pacotes turísticos para venda a preços fixos. Exemplos de pacotes incluem férias de luxo, casamentos de destino e férias de esqui.
More Related Content
What's hot
Eni new energy pakistan
Eni Bhit Gas Field is located 180 km north of Karachi in the Kirthar region of Pakistan. The gas field forms the boundary between the lower Indus plain to the east and Baluchistan to the west. The region receives a favorable sun irradiation through most of the year.
Ect kraft-paper
The document discusses the installation of a 550 kW energy conservation turbine (ECT) at a paper manufacturing plant in the United Arab Emirates. The ECT was installed in 2006 parallel to the steam header to recover energy from throttling steam. It generates 550 kW of power from 20 tons per hour of steam and saves the plant over $530,000 per year in energy costs. Over the turbine's 15-year lifespan, the total capital savings are estimated to be $7.9 million. The project achieved a payback period of less than one year and provides environmental benefits like reduced carbon emissions and improved process efficiency.
6 F.01 Technology update for customers
This document provides an overview of GE's 6F.01 gas turbine technology. It discusses the product's evolution from the 6C gas turbine, its modular design, validation testing, commercial operations including over 110,000 operating hours and 99.2% reliability. The 6F.01 is positioned as offering F-class efficiency at 50MW block sizes for combined cycle and cogeneration applications.
Gravitricity Ltd
Gravitricity is developing a gravity-based energy storage system using disused mine shafts. The system can provide rapid, durable, and low-cost grid-scale energy storage to support the global transition to renewable energy. Gravitricity is raising £500,000 to fund a 250kW demonstration project and expand their team to develop a 4MW prototype. They are seeking this seed funding from angel investors and strategic partners to unlock £650,000 in UK government innovation funding and advance their gravity-based storage technology.
2010 deep research report on global and china cigs thin film solar cell industry
This document provides a 210-page research report on the global and Chinese CIGS thin film solar cell industry from 2010. It includes profiles of over 20 CIGS manufacturers worldwide and details on their production capacities, module efficiencies, costs, profit margins, and expansion plans from 2009-2014. The report also analyzes the CIGS manufacturing process, equipment suppliers, market demand and supply, as well as the feasibility of building a new 50MW CIGS thin film solar cell project in China. Key findings are that CIGS module efficiency increased from 10% in 2008 to 12% in 2009 and production costs fell to around $0.8/Watt for some manufacturers.
Wind Energy's Future and the Impact on U.S. Manufacturing
Wind Energy's Future and the Impact on U.S. Manufacturing presentation at Ports-to-Plains Alliance Energy Conference in Washington DC on April 26, 2013.
Solar Energy Assessment Report for 100 kWp of Bengaluru, Karnataka created by...
Solar Energy Assessment Report for 100 kWp of Bengaluru, Karnataka created by Ezysolare. For more SEAR reports, Visit http://solardesign.ezysolare.com/
Florida Residential Going Green
BlueChip Energy™ provides solar energy solutions for numerous types of solar projects for residential, commercial, government, and utility applications. Striving to help our customers reduce their carbon footprint and claim their energy independence, BlueChip Energy™ is here to make a difference.
Solar thermal energy. Parabolic trough collectors
Abengoa counts on its own solar thermal
technology and is a world leader in the construction
of this type of plant, with 1.7 GW of installed
capacity representing 34 % of the worldwide
production of solar thermal energy.
Storelectric
The document discusses the problem of intermittent renewable energy sources and the need for large-scale, long duration electricity storage. It presents Storelectric's solution of using compressed air energy storage within underground salt caverns. This technology, called thermal energy storage CAES, can store enough electricity to power Europe for a week and has round trip efficiencies of 62-70%, making it more efficient and lower cost than existing large-scale storage options like pumped hydro. Each large plant could replace a conventional power station and support increasing renewable penetration onto the grid.
How to Solve Your Energy Problems with ADI Solar Plants
Alternative Designs Inc. (ADI) develops sustainable energy technologies to address intermittency issues with renewable energy. ADI's patented dual shell Stirling engine delivers 25 kilowatts of power and their solar collection dish improves solar collection efficiency. ADI also has a patented calcium hydride energy storage system that stores excess renewable energy for use after sunset. ADI is seeking $15 million in initial funding to construct a 100 kW pilot plant to demonstrate their technologies and help transition to commercialization.
ORC Heat-to-Power Systems: Thoughts on Codes, Standards and Regulations
2nd Meeting of the ASME IGTI ORC Power Systems Committee; Technical Subcommittee on Standards and Regulations; ASME Turbo Expo 2014; CCD Congress Center; Dusseldorf, Germany; Tuesday June 13, 2014; 5 - 8 PM CET
On-grid PV Opportunities in University Campuses: A case study at Nazarbayev U...
The universities around the world are taking every day a more decisive role in fighting global warming. Indeed,
many campuses are not only teaching established and disrupting clean energy technologies, but also are practicing
their lectures. For example, the University of Arizona, USA, leads the campuses with 28 MW of installed On-Grid
PV systems (http://www.aashe.org/resources/campus-solar-photovoltaic-installations/top10/). Furthermore,
campuses of emerging universities, as Nazarbayev University (NU), located in Astana, Kazakhstan, which is
developing with the firm aim to become a leader world class research university in the heart of Eurasia, are taking
this commitment as well. Additionally, being Kazakhstan the host of EXPO-2017 which has the motto: ¨Future
Energy¨, it is natural to evaluate if NU campus would be a good candidate to support and exhibit, with demonstrated
technical and economic advantages, its own On-Grid PV in-campus system. Therefore, in this investigation, a
feasibility study of installing PV panels on the rooftop of School of Engineering at NU is carried out. A 24 kWp rooftop
PV installation with a 14.7% capacity factor, capable to export 31 MWh of electricity to the grid per year, is assumed
to be the system for the purpose of this analysis. The financial analysis has a horizon of 20-year lifetime and 25%
debt ratio financed at 15% interest over 20 years. Selection of appropriate equipment and calculation of financial
outcomes under three different scenarios or policy options are presented. The policies or scenarios corresponded
to having or not government grants (GG) and having attractive Feed-in-Tariff (FIT) rates in order to determine their
financial benefits. The GG scenario was stretched up to consider 30% of the total project cost and FIT was varied
from current offered FIT rate by KEGOC (Kazakhstan utility company) of 36,410 KZT/MWh to a more attractive rate
of 70,000 KZT/MWh. Results demonstrate that current scenario of FIT is marginally favorable (IRR on Equity: 15.1%,
Benefit-Cost Ratio: 1.37, Equity Payback: 8.8 years), while the 30% of incentives on top of current FIT moderatedly
improves the benefits of the project (IRR on Equity: 20.9%, Benefit-Cost Ratio: 1.47, Equity Payback: 7.2 years).
Nevertheless, upgrading current FIT to 70,000 KZT/MWh, even without incentives, proved to be enough to
dramatically improve the outcome of the project for investors (IRR-Equity > 28%, Equity Payback of 5 years and
Benefit-Cost ratio > 3.6), demonstrating that with a subtle change in policies, Nazarbayev University as many other
campuses in the country, may easily justify the investment in their On-Grid PV systems and therefore, become part
of the “green” universities in the world with direct contribution to tackle climate change.
Masterfilter
Masterfilter solves a major maintenance issue for offshore wind turbines by extending the life of gearboxes. Gearboxes currently fail at an alarming rate due to contaminants in the lubricant. Masterfilter keeps gearboxes in serviceable condition for a vastly extended period by removing water and hard particulates from the lubricant, preventing damage. The company is seeking £185,000 in funding to complete third party testing and initial deployment of its filtration system.
Solibro_GmbH_company_presentation_2015-08_Rev04_EN_04
Solibro is a manufacturer of CIGS thin-film solar modules located in Germany. It is part of the Hanergy renewable energy group and has over 145 MW of annual module production capacity. Solibro develops its CIGS technology through research facilities in Germany and Sweden, and produces high-efficiency glass-glass modules through its manufacturing plant. It provides turnkey solutions for CIGS thin-film solar farms and has numerous commercial and utility-scale installations across Europe.
Power LifeMax* - Solutions for B/E Gas Turbine Fleet
- GE has over 40 years of experience with B/E gas turbine technology and has installed over 3,000 units globally totaling over 224 GW of power.
- GE offers Power LifeMax solutions to maximize the performance and value of mature gas turbine fleets, including the Advanced Gas Path and 9E Max upgrades.
- The Advanced Gas Path upgrade improves heat rate by 1.5% for combined cycle and 1.7% for simple cycle while increasing output by 3.8% for combined cycle and 3.6% for simple cycle. It has over 29,000 fired hours of experience across 8 units.
- The 9E Max upgrade further improves performance with a 6% reduction to combined cycle heat rate
Stationary/Transportation Heat-to-Power Applications with CN300 ORC Technololgy
ASME Turbo Expo 2014
Exhibitor Presentation Stage
CCD Congress Center | Düsseldorf, Germany
Keith D. Patch | ORC Product Manager
Concepts NREC (CN)
Tuesday, June 17, 2014, 3:15 PM CET
28% of the world’s total energy use is wasted but Is potentially recoverable
Can recover 144 GWe of electrical power from this waste heat, worth US$359B (at US$2,500/kWe)
World geothermal potential is 148 GWe
World biomass potential is 25 GWe
World solar thermal potential is 25 GWe
Natural energy + waste heat markets: 342 GWe or US$854B
An Organic Rankine Cycle (ORC) heat-to-power system is best suited for making electricity from these low-grade heat sources, using an organic fluid to match the fluid’s properties with the temperature of the heat source.
영문=10mw. fiji
The document proposes a 10MW solar plant project in Fiji. It discusses the project structure, location in Suba area of vatukoula, key parties involved, and financing. The proposal provides details on the solar modules, inverters, mounting systems, monitoring systems, and profitability analysis. It estimates the project will generate 14,454 MWh per year and have an IRR of 8-11% and equity IRR of 18-22% over the 20-year project period.
What's hot (18)
2010 deep research report on global and china cigs thin film solar cell industry
2010 deep research report on global and china cigs thin film solar cell industry
Wind Energy's Future and the Impact on U.S. Manufacturing
Wind Energy's Future and the Impact on U.S. Manufacturing
Solar Energy Assessment Report for 100 kWp of Bengaluru, Karnataka created by...
Solar Energy Assessment Report for 100 kWp of Bengaluru, Karnataka created by...
How to Solve Your Energy Problems with ADI Solar Plants
How to Solve Your Energy Problems with ADI Solar Plants
ORC Heat-to-Power Systems: Thoughts on Codes, Standards and Regulations
ORC Heat-to-Power Systems: Thoughts on Codes, Standards and Regulations
On-grid PV Opportunities in University Campuses: A case study at Nazarbayev U...
On-grid PV Opportunities in University Campuses: A case study at Nazarbayev U...
Solibro_GmbH_company_presentation_2015-08_Rev04_EN_04
Solibro_GmbH_company_presentation_2015-08_Rev04_EN_04
Power LifeMax* - Solutions for B/E Gas Turbine Fleet
Power LifeMax* - Solutions for B/E Gas Turbine Fleet
Stationary/Transportation Heat-to-Power Applications with CN300 ORC Technololgy
Stationary/Transportation Heat-to-Power Applications with CN300 ORC Technololgy
Viewers also liked
Ironman bibliography
Tony Stark created the Iron Man suit after being kidnapped and forced to build weapons. He used the suit to escape and later became a superhero with abilities like strength, flight, and shooting rays from his wrists. The document also notes that the author would most like to have Iron Man's ability to fly so they could travel quickly between places and because flying seems enjoyable.
8.ucl 05 oct 2009
This document discusses modelling non-Newtonian fluid flow through porous media. It defines Newtonian and non-Newtonian fluids, describes various rheological models including time-independent, viscoelastic, and time-dependent behaviors. It also discusses different modelling methodologies like continuum, bundle of capillaries, and network modelling approaches. Network modelling accounts for physics at the pore level and is computationally affordable. The document outlines strategies for modelling time-independent, viscoelastic, and time-dependent non-Newtonian fluid flow through pore networks.
Minuto, Anthony RESUME,2017
Anthony Minuto has over 20 years of experience in food operations and plant management. He has held positions such as Executive Chef, President, Director of QA/QC Process Technology, Director of R&D/Corporate Chef, and Plant Manager. Minuto has a proven track record of driving cost savings, quality excellence, and sales growth. He is skilled in food safety certifications, process improvements, and workforce training.
Classificação do turismo operador-tur
O documento classifica a indústria do turismo em tipos de serviços prestados, incluindo alojamento, transporte, agências de viagens e empresas de animação. Também descreve os operadores turísticos que combinam diferentes serviços em pacotes turísticos para venda a preços fixos. Exemplos de pacotes incluem férias de luxo, casamentos de destino e férias de esqui.
Higiene y seguridad
Una enfermedad laboral es aquella contraída como resultado de la exposición a factores de riesgo en el lugar de trabajo, ya sea por exposición prolongada o por un accidente. Los principales riesgos en el lugar de trabajo incluyen ruido, químicos, iluminación, temperatura y factores ergonómicos. Estos riesgos deben controlarse y prevenirse mediante el uso de equipos de protección, aislamiento de máquinas ruidosas, almacenamiento seguro de químicos y adoptando posturas de trabajo seguras.
Postres
Sting's song "Love Is The Seventh Wave" is about the power of love to overcome adversity. The lyrics describe love as a force like the seventh wave of the ocean, able to wash everything else away. The song conveys that no matter what challenges people face, their love for each other will allow them to make it through difficult times.
Risk Management Strategies -Opportunities and challenges-Final
Risk Management in Cotton Industries: Opportunities and Challenges discusses the various risks faced by cotton industries and strategies for managing those risks. The document outlines the risk management process and identifies key risks like commodity price risk, concentration risk, and operational risks. It then discusses various risk management strategies used in the cotton industry like hedging, diversification, and developing a risk culture. The presentation emphasizes the importance of knowledge of international trading practices and risk management for sustainability in the cotton industry.
The wolverine
Wolverine was born in the 19th century as James Howlet. He witnessed his father's death as a teenager and may have served in both World Wars. He was forced to kill his love Jean Grey and has many berserker rages. His arch enemy is Sabertooth, who kills many of Wolverine's loves. The Weapon X program gave him his adamantium claws. Wolverine has regenerative healing abilities, superhuman senses and reflexes, and martial arts skills comparable to an animal. He is able to come back from death like other comic heroes.
Project based
Project-based multimedia learning is a teaching method where students develop knowledge and skills by designing, planning, and creating multimedia products. It has several dimensions, including addressing core curriculum, making real-world connections, allowing extended timeframes, encouraging student decision making and collaboration, and incorporating multimedia creation and assessment. Students learn by authoring their own multimedia content, gathering materials, and creating presentations over a significant period of time.
Bad Infographics: Some Examples
The document discusses various ways that data can be misleadingly presented in charts and graphs. It provides examples of pie charts that are difficult to interpret because the slices are too small, as well as bar graphs that deceive by manipulating the scale of the y-axis to exaggerate differences. The document advocates for using complete data sets and properly scaling graphs to accurately represent information without bias.
Check Point: From Branch to Data Center
Check Point offers security solutions for enterprises moving from branches to data centers. They provide next generation firewalls, virtual systems, and software blades that deliver high performance security. Their 61000 and 21000 appliances include features like load balancing, customized security policies, and high throughput. For branches, the 1100 appliances extend enterprise-level security with local management. Check Point also provides a compliance blade and security monitoring tools to give organizations full visibility over their security posture and compliance.
Manual agro.
Este documento presenta la organización de una empresa productora de alimentos orgánicos. Describe los puestos y responsabilidades de la gerencia, incluyendo al jefe de producción, supervisor de producción y supervisor de control de calidad. Además, explica la misión de la empresa de producir alimentos de alta calidad para exportación y generar divisas, siguiendo normas de calidad y seguridad.
Maximizing the use of the overhead projector and chalkboard
The document discusses maximizing the use of chalkboards and overhead projectors in schools. It notes that while new technologies have been introduced, many schools only have basic equipment like chalkboards and overhead projectors. It provides tips for using chalkboards effectively, such as writing clearly, not overcrowding the board, and maintaining eye contact with students while writing. Advice is also given for using overhead projectors, such as showing pictures and adding details during projection using felt tip pens or wax pencils. The document emphasizes that learning to use basic equipment like chalkboards and overhead projectors effectively can help teachers realize instructional objectives and promote visual and lasting learning.
Natural history & spectrum of diseases
Natural history of disease describes the typical course a disease takes from exposure to outcome without treatment intervention. It includes induction time, incubation period, latency, stages of subclinical and clinical disease, and possible outcomes of recovery, disability, or death. Spectrum of disease refers to the full range of manifestations a disease can take in a population from precursor to severe states depending on interactions between host, agent, and environment factors. Studying natural history and spectrum is important for disease prevention by identifying appropriate intervention stages.
Viewers also liked (16)
Risk Management Strategies -Opportunities and challenges-Final
Risk Management Strategies -Opportunities and challenges-Final
Maximizing the use of the overhead projector and chalkboard
Maximizing the use of the overhead projector and chalkboard
Similar to Oem business presentation introduction jan 2017
Welltech Energy
WellTech Energy is a leading energy storage company that has been in operation for over 30 years. It focuses on research, development and manufacturing of innovative energy modules. The company has factories and R&D centers in Taiwan and China with a total manufacturing capacity of over 20,000 units per month. WellTech provides high quality products and services to major customers in consumer electronics and electric vehicles.
CRRC RENEWABLE_230901_180401.pdf
This document provides an overview of CRRC Renewable and its business operations. It discusses CRRC Renewable's 143 years of history, listing in the Fortune 500, $32.2 billion turnover, and 180,000 employees. The document also summarizes CRRC Renewable's key products and services like wind turbines, energy storage systems, new materials, and railways. It provides details on its global presence, R&D capabilities, technical expertise, key projects, and worldwide partners.
Solar Systems By Tecso Projects Limited, Vadodara
Started to create milestones, we, Tecso Projects Limited marked our presence in the year 2010 and operate in the manufacturing/servicing of Solar Industrial Rooftop System, Solar Home Rooftop System since 6 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Solar Industrial Rooftop System, Solar Home Rooftop System, Solar Water Pumping System, Finite Element Analysis, Products Design and Development, Data Management Services, Global Sourcing, IT Solutions has deepened our roots in the market. We, Tecso Projects Limited breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Fcel corporate presentation
This document provides an update from a fuel cell technology company in June 2013. It discusses the company's initiatives to establish a global footprint, increase annual production rates in North America, and pursue larger installations including multi-megawatt plants. The company is executing strategies in North America, Asia, and Europe to expand its markets and drive costs below grid parity. It outlines its path to profitability through committed order backlog and volume growth.
Fuelcell jun13 update
This document provides an update from a fuel cell technology company in June 2013. It discusses the company's initiatives to establish a global footprint, increase annual production rates in North America, and pursue larger installations including multi-megawatt plants. The company is executing strategies in North America, Asia, and Europe to expand its markets and drive costs below grid parity. It outlines its path to profitability through committed order backlog and volume growth.
Fuelcell 13 Company Update
This document provides an update from a fuel cell technology company in June 2013. It discusses the company's initiatives to establish a global footprint, increase annual production rates in North America, and pursue larger installations including multi-megawatt plants. The company is executing strategies in North America, Asia, and Europe to expand its markets and drive costs below grid parity. It outlines its path to profitability through committed order backlog and volume growth.
Intelligent Energy Systems
This document discusses intelligent energy systems and how National Instruments provides technologies to help address challenges in energy generation, transmission, and usage. Some key points:
- National Instruments is a leading provider of computer-based measurement and automation technologies headquartered in Austin, TX.
- There are many engineering challenges in energy including improving renewable energy efficiency, developing alternative transportation systems, and increasing overall energy efficiency.
- National Instruments offers graphical system design platforms, hardware, and software like LabVIEW and CompactRIO to help design, prototype, and deploy solutions for monitoring renewable energy systems, smart grid technologies, power quality monitoring, and more.
Sep 13 corporatepresentation
This presentation provides an overview and update on FuelCell Energy, Inc. It discusses the company's global footprint and initiatives to increase annual production capacity. Key points include plans to establish local manufacturing in Asia to reduce costs and support market growth. FuelCell also discusses multi-megawatt fuel cell installations, progress towards profitability, and its technology roadmap including expanding into carbon capture, renewable hydrogen, and new applications like data centers.
Engage with...Control Techniques, a Nidec Brand | Driving the Electric Revolu...
This document summarizes a presentation given by Control Techniques UK on driving the electric revolution. It provides an overview of Nidec Corporation, the parent company of Control Techniques, and their focus on motor and drive technology. It discusses Control Techniques' growing UK footprint and plans to scale up UK production. It also highlights Control Techniques' research and development capabilities and examples of innovative applications of their drive technology, such as for cargo transportation systems, wind turbines, and automotive testing equipment.
SOLAR PUMPS A BOON FOR FARMERS BUT ?? But right policies only make it happen
Solar Pumps can be a boon to farmers and village councils for providing water to the village while any one can own the SOLAR WATER PUMPING SYSTEM, with lot of ease, they can have both the facilities as a single 2 HP pump, can ease the water problem for a farmers family while giving more than 5000 litres of purified water with a mere Reverse osmosis water purification plant for pure drinking water purposes to a small village. contact us for more complimentary details:
technology@globalenergycollaborations.com
Suntellite PPT
Suntellite Group is a solar energy company established in 2006 with over $1 billion in annual revenue. It has over 2500 employees and 240,000 square meters of production facilities. The company specializes in solar cells, modules, inverters, and energy storage systems. It has international certifications and sells products to over 20 countries through 200 distribution channels. Suntellite has completed numerous large-scale solar projects worldwide as well as many distributed commercial roof projects across China.
Jakson Power Solutions
Jakson Power is a diversified group with multiple business interests in Power Generation, Power Distribution Products, Solar Business, Electrical Contracting, International and Hospitality.
First Solar FDI in Brazil
This document summarizes a proposed foreign direct investment in Brazil's solar energy sector. The proposal includes a $60 million investment in a 70 MW solar panel manufacturing plant with potential to scale up to 250 MW. A $10 million investment is proposed for a research center funded by grants. Additionally, a $250 million, 100 MW solar power plant is proposed, with 10% of costs as cash and 90% financed through debt. The total proposed investment is $350 million, and the forecast internal rate of return is 15%. The proposal cites reasons for investing in Brazil's solar energy market, including its high solar irradiation levels, emerging middle class, and government initiatives supporting solar energy development.
PRESENTATION_SAONON_PDF new
This document provides an overview of Saonon Electric & Machine Co., Ltd. It details the company's history starting in 1978 and locations in Guangzhou, China and Singapore. It outlines the company structure and departments. The document discusses the company's domestic and international projects, products including generators in various power ranges, patents, and certifications. Major clients are listed from sectors like energy, telecommunications, and construction. Key overseas markets discussed are Southeast Asia, the Middle East, Europe, and Africa.
Green, Sustainable Microturbines
Microturbines are a green new way to power buildings while heating and cooling them. Also, microturbines burn waste gas from landfills, sewage treatment plants, farms and the like, turning it into clean electricity for the electric grid.
A-OK introduction
This document provides an overview of A-OK Tech, a Chinese company that specializes in AI automation and drive systems. It details A-OK's facilities, production capabilities, global presence, research collaborations, product range, and references major infrastructure and commercial projects. The company expects 20% revenue growth in 2020 to reach $100 million. With extensive in-house manufacturing and R&D capabilities, A-OK aims to be a leading innovator in China's AI automation industry.
TBEA Solar panels
Presentation describes about the manufacturing capability of TBEA in the field of manufacturing solar panels and Inverters
present_noera.ppt
This document provides information on Ansaldo Energia's facilities, products, and worldwide installed base. It has three main campuses in Italy for manufacturing gas turbines, static parts, and blades. It is a leader in steam and gas turbines, turbogenerators, and thermal and hydro power plants. As of 2009, it has over 177 GW of installed power worldwide across its gas turbines, steam turbines, hydrogenerators, and other products located in over 30 countries. The document provides breakdowns of its product lines, service portfolio, and worldwide customer reference lists.
Control Panels USA - custom industiral control solutions
Control Panels USA brings a wide value stream of design engineering and manufacturing capabilities to customers whose products must not fail in harsh environments
Similar to Oem business presentation introduction jan 2017 (20)
Engage with...Control Techniques, a Nidec Brand | Driving the Electric Revolu...
Engage with...Control Techniques, a Nidec Brand | Driving the Electric Revolu...
SOLAR PUMPS A BOON FOR FARMERS BUT ?? But right policies only make it happen
SOLAR PUMPS A BOON FOR FARMERS BUT ?? But right policies only make it happen
Control Panels USA - custom industiral control solutions
Control Panels USA - custom industiral control solutions
Recently uploaded
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Recently uploaded (20)
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Oem business presentation introduction jan 2017
- 1. Qnergy PCK80 ◊ Extreme Reliability ◊ Zero Maintenance ◊ High Efficiency ◊ Low Cost Maintenance Free Generator
- 2. 45 Years of Designing & Producing Stirling-based Devices Working with NASA “Curiosity” landed on Mars Aug 2012 carrying two Stirling Engines by Qnergy’s parent company o Stirling Engine Technology with more than 30% global market share (thermal Infrared Imaging) o Over 2.5 million operating hours using Stirling Engine Technology in power-generation applications o State-of-the-art , high precision manufacturing plant in Ogden, Utah Working with the US Army Military Grade Power Plant – Utah (Tooele) – 420 operating units Mature Production Line Over 15,000 units per year production capacity
- 3. Qnergy Production and HQ Facility in the USA Utah based manufacturing facility specializing in high volume, lean manufacturing of Free Piston generators $300 Million invested in technology infrastructure 60,000 Sq. feet Manufacturing and US HQ Capacity up to 10,000 engines per year Over 220 years of combined experience in high volume manufacturing and engineering Reliability Test Center
- 4. Extensive Integration Experience One Generator Multiple Applications Millions of Operating Hours Remote Power O&G Remote Power Telecom CSP applications Biomass – wood pellet boilers SmartBoiler – mCHP solutions
- 5. PCK80 – building blocks 38% engine electric efficiency Reaching 95% efficiency (HHV) in CHP application High Efficiency High Efficiency Zero Maintenance Zero Maintenance Sealed Environment and no Friction Zero maintenance for 100,000 of Operating hours Ease of Integration Ease of Integration Simple Design – 63 parts only Small Footprint and Light Weight Certified both under CE and UL max 7.8 kW Full Modularity DC to DC / DC to AC Flexible Power Output Flexible Power Output Burner Electricity Out Heat Out Flexure Bearings Linear Alternator Cooling Maintenance Free Generator
- 6. PCK80 Applications o Remote Power O&G o Telecommunication o Biomass o Biogas o Waste Heat Recovery o Bottoming Cycle
- 7. Thank You!