Forum's ABZ Valves come in a wide variety of sizes and functions. From general purpose to high performance pneumatic and electric, you will find that our valves withstand difficult fluid compositions and high-temperature applications.
In this special edition of Know Your Supplier’s cover story, we feature Bharaj Machineries Pvt. Ltd., a company that has been steadily building up their repute with global approach and right technology.
The Classification of Rubber Calenders is based on (1) The Number of rolls, and (2) The Position or Orientation of the rolls. Here is a quick info-sheet to help you grasp the different rubber calenders quickly.
Rubber extruders have a varied field of application. So, when you come across a rubber profile, strip, hose, cable, wire, cord coating, tire tread, v-belt, tube, or blank remember that they are only a few handful of products manufactured using extrusion process. In this Knowledge On-The-Go Special Supplement, we bring to you a ‘collector’s edition’ on Extruders and Extrusion incorporating the fundamentals.
Rolling contact bearings are also known as anti-friction bearing due to its low friction characteristics between ball and inner and outer rings. Rolling contact bearings are used for radial load, thrust load and combination of these both loads. Rolling contact bearings are often used due to its lower price, less maintenance cost and easy to operate.
In this special edition of Know Your Supplier’s cover story, we feature Bharaj Machineries Pvt. Ltd., a company that has been steadily building up their repute with global approach and right technology.
The Classification of Rubber Calenders is based on (1) The Number of rolls, and (2) The Position or Orientation of the rolls. Here is a quick info-sheet to help you grasp the different rubber calenders quickly.
Rubber extruders have a varied field of application. So, when you come across a rubber profile, strip, hose, cable, wire, cord coating, tire tread, v-belt, tube, or blank remember that they are only a few handful of products manufactured using extrusion process. In this Knowledge On-The-Go Special Supplement, we bring to you a ‘collector’s edition’ on Extruders and Extrusion incorporating the fundamentals.
Rolling contact bearings are also known as anti-friction bearing due to its low friction characteristics between ball and inner and outer rings. Rolling contact bearings are used for radial load, thrust load and combination of these both loads. Rolling contact bearings are often used due to its lower price, less maintenance cost and easy to operate.
I learned a lot of things about pulleys from http://www.beltcorp.com/pulleys.html and so I made a slide set of what I've learned from this primary source and a couple of other sources. It's great to learn about these timing belt pulleys and how they help make many products and services more available.
FLYWHEEL AND GOVERNORS
A flywheel is a mechanical device specifically designed to efficiently store rotational energy.
IT STORES ENERGY DURING POWER STROKE AND RELEASES ENERGY DURING IDLE STROKE.
The main function of a flywheel is to smoothen out variations in the speed of a shaft caused by torque fluctuations.
flywheel does not maintain a constant speed; it simply reduces the fluctuation of speed.
a flywheel controls the speed variations caused by the fluctuation of the engine turning moment during each cycle of operation.
FLYWHEEL IS MADE UP OF………
flywheel made up of cast iron has more mass for same values of energy storage compared with all other materials. It is because of high density and less strength of cast iron. It is followed by, steel and E-glass fibre composite.
The flywheel position is between engine and clutch patch to starter.
flywheel connects the rotation from engine to clutch plate to the transmission.
Flywheel also makes the crankshaft to move in a motion to make the engine work from starter.
Governor is a mechanical device which is used to regulatethe mean speed of the engine, when there are variations in the load.
the governor automatically controls the supply of working fluid to the engine with the varying load condition and keeps the mean speed within certain limits.
when the load on an engine increases, its speed decreases, therefore it increases the supply of working fluid.
On the other hand, when the load on the engine decreases, its speed increases and thus less working fluid is supplied.
BY- TRISHAM GARG
MM UNIVERSITY MULLANA
CONTACT NUMBER - 8059495599
GWC Valve International's Double Offset High Performance Butterfly valves are designed for shutoff and throttling control of liquids and gas. We offer a full range of materials to suit your specific applications.
GWC line of Triple Offset Butterfly valves are available in a wide range of pressure class, materials and body configurations. This product is designed for Bi-directional Bubble Tight Shutoff being fully engineered and manufactured to exceed our clients stringent process requirements.
I learned a lot of things about pulleys from http://www.beltcorp.com/pulleys.html and so I made a slide set of what I've learned from this primary source and a couple of other sources. It's great to learn about these timing belt pulleys and how they help make many products and services more available.
FLYWHEEL AND GOVERNORS
A flywheel is a mechanical device specifically designed to efficiently store rotational energy.
IT STORES ENERGY DURING POWER STROKE AND RELEASES ENERGY DURING IDLE STROKE.
The main function of a flywheel is to smoothen out variations in the speed of a shaft caused by torque fluctuations.
flywheel does not maintain a constant speed; it simply reduces the fluctuation of speed.
a flywheel controls the speed variations caused by the fluctuation of the engine turning moment during each cycle of operation.
FLYWHEEL IS MADE UP OF………
flywheel made up of cast iron has more mass for same values of energy storage compared with all other materials. It is because of high density and less strength of cast iron. It is followed by, steel and E-glass fibre composite.
The flywheel position is between engine and clutch patch to starter.
flywheel connects the rotation from engine to clutch plate to the transmission.
Flywheel also makes the crankshaft to move in a motion to make the engine work from starter.
Governor is a mechanical device which is used to regulatethe mean speed of the engine, when there are variations in the load.
the governor automatically controls the supply of working fluid to the engine with the varying load condition and keeps the mean speed within certain limits.
when the load on an engine increases, its speed decreases, therefore it increases the supply of working fluid.
On the other hand, when the load on the engine decreases, its speed increases and thus less working fluid is supplied.
BY- TRISHAM GARG
MM UNIVERSITY MULLANA
CONTACT NUMBER - 8059495599
GWC Valve International's Double Offset High Performance Butterfly valves are designed for shutoff and throttling control of liquids and gas. We offer a full range of materials to suit your specific applications.
GWC line of Triple Offset Butterfly valves are available in a wide range of pressure class, materials and body configurations. This product is designed for Bi-directional Bubble Tight Shutoff being fully engineered and manufactured to exceed our clients stringent process requirements.
Pipe fitting . in flanges fitting manufatuers, supplier, dealer in mumbai ,i...DivyaDarshanMetallic
Pipe fitting . in flanges fitting manufatuers, supplier, dealer in mumbai ,india , saudi arabia
Pipe fitting . in flanges fitting manufatuers, supplier, dealer in mumbai ,india , saudi arabia
Pipe fitting . in flanges fitting manufatuers, supplier, dealer in mumbai ,india , saudi arabia
Magnetic level indicators provide highly visible indication of level with or without signal outputs monitoring tail and vessel level. The term bridle is used to describe a vertical pipe connected to the side of a storage tank or process vessel, most often with side-to-side or side-to-bottom connections. Because the fluid inside the bridle rises and falls equally with the level of fluid inside the tank or vessel, bridles have been adapted for level measurement use on a broad scale.
In many industries, the atmosphere, though safe to breath, may be unsafe for an electrical spark. These areas often have pneumatically operated equipment for safety. And that equipment needs a source of clean dry air or as it is called in the industry, Instrument Grade Air. Plants typically have a centralized instrument grade air line that delivers air to the instruments that need it. However, oftentimes the instrument grade air is of inferior quality and contaminated with water. This air will benefit from a point of use drying system that guarantees instrument grade air. Traditional drying systems using PSA (Pressure Swing Adsorption) or refrigerant require expensive modifications to operate within hazardous areas. Air dryers made from hollow fiber membranes can dry compressed air without the use of electricity and are therefore safe for hazardous environments.
Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts or ignitable fibers and flyings. Refineries, chemical processing plants, mines and grain mills are examples of industries with hazardous atmospheres. Even a small spark can lead to a horrific explosion dangerous to equipment and workers in the area.
ignalFire’s unique patent-pending two-way mesh technology provides the power and stability needed for reliable data transfer over long node-to-node distances. They couple an innovative message-forwarding architecture with low-cost, high-power ISM-band radios, creating a simple, affordable system that’s easy to deploy. Their technology is ideal for applications calling for many assets widely dispersed (up to 4 miles point-to-point), such as flow, level, pressure, and temperature, and can control devices such as pumps, valves, fans, and lighting.
Parker Balston is a division of Parker Hannifin, world’s leading diversified manufacturer of motion and control technologies and systems. Balston manufacturers industrial filters and filtration technology, replacement filter elements, compressed air dryers, nitrogen generators, and compressed air microbial detection.
The Fox Model FT4X, is the newest Thermal Gas Mass Flow Meter offered from Fox Thermal Instruments.
The Model FT4X measures gas flow rate in standard units (MSCFD, SCFM, NM³/hr, LBS/HR, KG/HR & many more) without the need for temperature and pressure compensation.
This article discusses the advantages of Blunt Rod (BR) Lightning Protection over Nonconventional early streamer emission (ESE) and lightning dissipation array (LDA) approaches.
The FLUXUS G704 is FLEXIM's gas flow meter for permanent installation in nearly any gas flow metering application. Its non-intrusive measurement technology ensures a precise bi-directional, highly dynamic gas flow measurement of operational and standard volume flows.
GE Oil & Gas offers, under their Becker brand name, segmented valve rotary control valves known throughout the world for quality and durability. Becker valves have a proven track record, installed in a variety of process industries and applications. Segmented ball rotary valves offer dependability and a unique combination of high capacity and turndown capability.
ABZ manufactures a series of high performance butterfly valves ranging from 2-48 inches with 150-600 psi. Our valve design is ideal for manual or automated actuation and is used for industrial, chemical, HVAC, and food and beverage applications. An ABZ high performance butterfly valve can be installed with a manual hand gear, electric actuator, or a pneumatic actuator to fit any of your projects or design specifications.
Nitrogen generation is a more modern means of separating air. There are two means of separating gases non cryogenically. One is with hollow fiber membranes and one is with pressure swing adsorption.
CENTUM VP has a simple & common architecture consisting of human machine interfaces, field control stations, and a control network. It supports not only continuous and batch process control but also manufacturing operations management.
The REXA X2D Damper Drives allow for modulating duty cycle and precise positioning independent of load variation. Hydraulic pressure is generated by an internal positive displacement gear pump driven a stepper or servo motor with no limitations on starts, stops,
or reverse cycles. This self-contained electro-hydraulic system locks the cylinder in place when no movement is required. This minimizes wear-and-tear on moving components and eliminates unnecessary power consumption.
Fireye PPC4000 is a state of the art parallel positioning system for all types of liquid or gaseous fuel fired combustion systems. When combined with a Fireye flame safeguard system such as the Fireye BurnerLogix control, the PPC4000 offers the most compact and advanced parallel positioning system available.
D3 is a Digital positioner where high air delivery capacity is combined with low air consumption. It suits both linear and rotary actuators, single or double acting. Five keys and a large graphic display make D3 simple to configure and adjust. The pneumatic relay consists of piezo electric valves and is made of plastic to offer high corrosion resistance. An easily accessible built in replaceable filter is provided to offer durability together with a sealed of compartment for the terminals. Communication is possible via HART, Profibus PA and Foundation Fieldbus.
Thermal Mass Flow Meters Reduce Energy Costs and Enhance Emissions MonitoringClassic Controls, Inc.
The thermal mass flow meter's ability to deliver a direct reading of mass flow rates of air, natural gas and other fuel gases provides a simple, reliable, and cost-effective method for controlling combustion efficiency and emissions.
See-Flo® Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.
Gases and steam are compressible. It is normal that when gas or steam reaches the disc in a valve, it compresses and builds up before passing through the valve. This compression may cause a rapid build up of system pressure and be potentially harmful. There are other process conditions, such as boiler control malfunction, that can create elevated pressure in a closed system. Every system and component in a pressurized system has a safe operating pressure limit that must not be exceeded.
The PK200 current-to-pneumatic (I/P) converter offers a low-cost method to convert a milliamp input (4-20 or 10-50mA analog signals) to a proportional pneumatic (air pressure) output. The unit is designed for a broad range of process control applications, including those that feature pneumatic actuating equipment. The PK200 features built-in stainless steel input/output gauges.
The two most important design innovations on the new FT4A are the new 2nd Generation DDCSensor™ and the expanded GasSelectX® gas selection menu.
Like all Fox meters, the rugged FT4A measures gas flow rate in standard units without the need for temperature or pressure compensation.
Yokogawa released the world's first vortex flowmeter in 1968. Thanks to its long-term stability and high accuracy, our customers have achieved significant improvements in productivity over the past forty years. In response to ever changing market needs, Yokogawa has gone on to release high temperature, cryogenic, dual-sensor, reduced bore, and FOUNDATION Fieldbus communication versions of this product.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Immunizing Image Classifiers Against Localized Adversary Attacks
Double Offset High Performance Butterfly Valves
1.
2. Integrally Cast
Disc Position Stop
Machined position stop
in the body locates
the disc in the seat
to achieve maximum
sealing and seat life.
Body
High quality
one-piece casting
provides consistent
uniformity. Body is
available in Wafer,
Lug, Double Flanged
and Butt Welded.
Body materials
include WCB,
CF8M, Duplex
2205, Monel,
SMO 255 and
many others.
Mounting Flange
Designed to direct mount actuation for
ease of installation and cost savings. No
bracket is needed for manual actuation or
for automatic automation up to 20 inches.
Blowout Proof Stem
Blowout proof stem
retention system is
designed per API 609
standards and is located
above the packing area.
Seat Retainer Plate
Constructed of the same material as the
body, this robust multi-bolted seat retainer
contains and supports the seat in both
Bi-Directional Flow and Double Dead End
Service for all soft seated valves.
Underneath Drawn Gland Packing
Allows for direct mounting of actuation
and ease of user adjustment. A rocker
design gland flange and packing gland
is utilized to insure 360 degree packing
adjustment.
Seat
An advanced free floating, pressure
assisted, solid seat design provides an
interference and pressure assisted seal. This
achieves a positive seal under both low and
high pressure requirements. The 400 series
seat does not rely on secondary located
components such as O-Rings, springs, wire
or metal bands to hold the seat in place.
This allows for a longer service life with
less maintenance.
Extended Neck
Allows for two inches
of pipe insulation. Packing
PTFE is a cup
and cone system.
Graphite is
die-formed rings
for positive seals.
Bearings
Made of Graphite impregnated
or reinforced PTFE impregnated
316 Stainless Steel to ensure long
service life.
Stem
Manufactured as a standard of 17/4 PH
Stainless Steel to provide maximum strength
and stability for high torque applications.
Other materials available upon request.
Disc
Standard construction is 316
stainless steel with numerous alloys
available. ABZolute 400 Series disc
is engineered for a quick release
from the seat which reduces torque
and seat wear.
Disc Taper Pins
Pins are offset from the center
of the stem which places them
in compression rather than in
sheer. This gives them a yield
point greater than the stem
itself. Pins are welded in place
after final assembly and testing.
3. Soft Seat Design:
• Solid seat, free floating, pressure
assisted seal
• No additional parts are required
to maintain positive seal
• ABZolute 400 series soft seated valves
are rated full ANSI pressure
• Seat and seat retainers are designed
for Bi-Directional and Double Dead
End Service
• Class VI Bi-Directional shut off
Fire Safe Seat Design:
• Solid seat with metal back up seat,
free floating, pressure assisted seal
• No additional parts are required
to maintain positive seal
• ABZolute 400 Series Fire Safe valves
are rated full ANSI pressure
• API 607 Fire Safe tested
• Class VI shut off before fire and
Class V shut off after fire
Metal Seat Design:
• Machined metal seat, free floating,
Uni-Directional, pressure Assisted seal
• ABZolute 400 Series metal seated valves
are rated full ANSI pressure
• API 607 Fire Safe tested
• Class V Uni-Directional shut off
Note: Soft and Fire Safe Seated valves are rated for full
vacuum. Valves in vacuum service must be installed with
vacuum on upstream side of valve. (Retainer side)
4. End Connection Wafer Type, Lug Type Flange Type Butt Weld Type
ABZ Standard API 609 & ANSI/ASME B16.34 API 609 & ANSI/ASME B16.34 ANSI/ASME B16.34 &
API 607 (Fire Safe Test) ANSI/ASME B 16.25
Optional BS 5155 BS 5155
Configurations
API 609 Category B ISO 5752 Table 6
MSS-SP-68 Table 1 BS 5155 Table 6 ISO 5752 Table 4
ABZ Standard
ANSI/ASME B 16.10 Table8 ANSI/ASME B 16.10 BS 5155 Table 6
ISO 5752 Table 1& BS 5155 Table 6 (Only 2" & 2.5")
Optional DIN 3202 DIN 3202
Configurations ISO 5752 ISO 5752
BS 5155 BS 5155
ANSI/ASME B 16.5 ANSI/ASME B 16.5
CL150,300,600 CL150,300,600
ABZ Standard ANSI/ASME B 16.47 Series A ANSI/ASME B 16.47 Series A Butt Welding according to
CL150,300 CL150,300 ANSI/ASME B16.25
MSS-SP-44:CL150,300,600 MSS-SP-44:CL150,300,600
API 605 : CL.150, CL.300 API 605 : CL.150, CL.300
JIS B 2210 JIS B 2210
Optional 10K,16K,20K,30K,40K 10K,16K,20K,30K,40K
Configurations DIN02501, ISO 7005-1 DIN02501, ISO 7005-1
PN10,PN16,PN20,PN25, PN40 PN10,PN16,PN20,PN25, PN40
API 598 API 598
ABZ Standard ANSI/ASME B 16.34 ANSI/ASME B 16.34 API 598
BS 1560 BS 1560 ANSI/ASME B 16.34
BS 5155 BS 5155
JIS B 2203, 2201 JIS B 2203, 2201
DIN 3230 DIN 3230 FCI 70-2
Optional ISO 7005 ISO 7005 ANSI/ASME B 16.104
Configurations FCI 70-2 FCI 70-2 MSS-SP 61
ANSI/ASME B 16.104 ANSI/ASME B 16.104
MSS-SP 61 MSS-SP 61
Design
Standard
Face to
Face
Flange
Connection
Testing
Manufacture Standard
Double Flanged Pattern Available
Wafer Pattern
401 - ANSI 150
421 - ANSI 300
451 - ANSI 600
Lug Pattern
402 - ANSI 150
422 - ANSI 300
452 - ANSI 600
5. The pressure/temperature rating Is determined by the seat or body rating whichever is less.
ABZolute - ANSI 600
FIRE SAFE AND METAL SEAT - TEMP/PRESSURE
The pressure/temperature rating Is determined by the seat or body rating whichever is less.
ABZolute - ANSI 600
SOFT SEAT - TEMP/PRESSURE
The pressure/temperature rating Is determined by the seat or body rating whichever is less.
ABZolute - ANSI 300
SOFT SEAT - TEMP/PRESSURE
The pressure/temperature rating Is determined by the seat or body rating whichever is less.
ABZolute - ANSI 300
FIRE SAFE AND METAL SEAT - TEMP/PRESSURE
The pressure/temperature rating Is determined by the seat or body rating whichever is less.
ABZolute - ANSI 150
SOFT SEAT - TEMP/PRESSURE
The pressure/temperature rating Is determined by the seat or body rating whichever is less.
ABZolute - ANSI 150
FIRE SAFE AND METAL SEAT - TEMP/PRESSURE