DNS server configuration in packet tracer
•
0 likes•1,047 views
DNS server configuration in packet tracer. 1. First, build your network topology 2. Configure the static IP Addresses on the PCs and the Server. 3. Configure DNS services of the server. 4. Test domain name IP resolution. Using their names instead of their IP addresses, ping the hosts from one another.
Report
Share
Report
Share
Download to read offline
Recommended
Packet tracer
Cisco Packet Tracer is a network simulation program that allows students to experiment with network behavior. The document describes how to set up three example networks using Packet Tracer. It explains how to connect routers and PCs, assign IP addresses to devices, and configure routing protocols to allow communication between the networks. Setting up the example networks demonstrates how to build and test a multi-network topology in Packet Tracer.
Dns ppt
The document is a presentation on DNS (Domain Name System) given by Mauood Hamidi for his dissertation. It covers definitions of DNS, different types of DNS servers, tools used for DNS queries, DNS records, how DNS works to resolve domain names to IP addresses, and components of the DNS system like zones, name servers, and security considerations. It aims to provide an overview of the key concepts and functioning of DNS.
Cisco packet tracer dhcp
Connect end devices like PCs to a switch and server. Configure the DHCP server by assigning it an IP address and subnet mask, and enabling DHCP service to assign IP addresses from a range to the maximum number of users. With DHCP enabled on the clients, the server will automatically assign IP addresses to the PCs, easing configuration and reducing administrative overhead compared to manually assigning each IP address.
Domain Name System
The Domain Name System (DNS) is a hierarchical distributed naming system for computers, services, or any resource connected to the Internet or a private network. It associates various information with domain names assigned to each of the participating entities. A domain name represents an Internet Protocol (IP) resource ultimately identifiable by a numeric IP address. DNS servers store records that map domain names to IP addresses and vice versa. The DNS hierarchy consists of root name servers at the top, authoritative name servers for top-level domains and their subdomains below them. When a user enters a domain name, the DNS server first checks its cache and if it doesn't find a match, it queries authoritative name servers to resolve the IP address associated with the domain name.
IP Address - IPv4 & IPv6
IP addresses are numeric identifiers assigned to devices connected to a network. IPv4 uses 32-bit addresses represented in dotted decimal notation, while IPv6 uses 128-bit addresses represented by 8 groups of hexadecimal digits separated by colons. IP addresses have two parts - a network portion allocated by ISPs and a host portion assigned to individual devices. IPv4 classes (A, B, C, D, E) determine how many bits are used for the network vs host portions. IPv6 supports a much larger address space and easier auto-configuration compared to IPv4.
DNS server config on cisco packet tracer
The document describes how to configure a DNS server in Packet Tracer. It involves building a network topology with a server and two PCs, configuring static IP addresses, enabling the DNS service on the server, defining name-IP address mappings for each host, and testing domain name resolution by pinging hosts by name.
Nat pat
NAT is used to translate private IP addresses to public IP addresses to allow access to the internet. There are different types of NAT including static NAT for one-to-one mapping, dynamic NAT for mapping multiple private addresses to public addresses from a pool, and NAT overload/PAT which maps multiple private addresses to a single public address using port addressing. The document provides configuration examples for static, dynamic, and overload NAT on a Cisco router.
Dhcp
DHCP (Dynamic Host Configuration Protocol) is a protocol that automatically provides IP hosts with IP addresses and other configuration information from a DHCP server. It uses UDP and works by having clients broadcast discover messages to locate servers, which respond with offer messages containing IP addresses and configuration options. Servers then acknowledge address assignments, while also allowing reservations of specific addresses and exclusions of certain ranges. Windows Server backs up the DHCP database and configuration every 60 minutes for restoration using the netsh command.
Recommended
Packet tracer
Cisco Packet Tracer is a network simulation program that allows students to experiment with network behavior. The document describes how to set up three example networks using Packet Tracer. It explains how to connect routers and PCs, assign IP addresses to devices, and configure routing protocols to allow communication between the networks. Setting up the example networks demonstrates how to build and test a multi-network topology in Packet Tracer.
Dns ppt
The document is a presentation on DNS (Domain Name System) given by Mauood Hamidi for his dissertation. It covers definitions of DNS, different types of DNS servers, tools used for DNS queries, DNS records, how DNS works to resolve domain names to IP addresses, and components of the DNS system like zones, name servers, and security considerations. It aims to provide an overview of the key concepts and functioning of DNS.
Cisco packet tracer dhcp
Connect end devices like PCs to a switch and server. Configure the DHCP server by assigning it an IP address and subnet mask, and enabling DHCP service to assign IP addresses from a range to the maximum number of users. With DHCP enabled on the clients, the server will automatically assign IP addresses to the PCs, easing configuration and reducing administrative overhead compared to manually assigning each IP address.
Domain Name System
The Domain Name System (DNS) is a hierarchical distributed naming system for computers, services, or any resource connected to the Internet or a private network. It associates various information with domain names assigned to each of the participating entities. A domain name represents an Internet Protocol (IP) resource ultimately identifiable by a numeric IP address. DNS servers store records that map domain names to IP addresses and vice versa. The DNS hierarchy consists of root name servers at the top, authoritative name servers for top-level domains and their subdomains below them. When a user enters a domain name, the DNS server first checks its cache and if it doesn't find a match, it queries authoritative name servers to resolve the IP address associated with the domain name.
IP Address - IPv4 & IPv6
IP addresses are numeric identifiers assigned to devices connected to a network. IPv4 uses 32-bit addresses represented in dotted decimal notation, while IPv6 uses 128-bit addresses represented by 8 groups of hexadecimal digits separated by colons. IP addresses have two parts - a network portion allocated by ISPs and a host portion assigned to individual devices. IPv4 classes (A, B, C, D, E) determine how many bits are used for the network vs host portions. IPv6 supports a much larger address space and easier auto-configuration compared to IPv4.
DNS server config on cisco packet tracer
The document describes how to configure a DNS server in Packet Tracer. It involves building a network topology with a server and two PCs, configuring static IP addresses, enabling the DNS service on the server, defining name-IP address mappings for each host, and testing domain name resolution by pinging hosts by name.
Nat pat
NAT is used to translate private IP addresses to public IP addresses to allow access to the internet. There are different types of NAT including static NAT for one-to-one mapping, dynamic NAT for mapping multiple private addresses to public addresses from a pool, and NAT overload/PAT which maps multiple private addresses to a single public address using port addressing. The document provides configuration examples for static, dynamic, and overload NAT on a Cisco router.
Dhcp
DHCP (Dynamic Host Configuration Protocol) is a protocol that automatically provides IP hosts with IP addresses and other configuration information from a DHCP server. It uses UDP and works by having clients broadcast discover messages to locate servers, which respond with offer messages containing IP addresses and configuration options. Servers then acknowledge address assignments, while also allowing reservations of specific addresses and exclusions of certain ranges. Windows Server backs up the DHCP database and configuration every 60 minutes for restoration using the netsh command.
DHCP Server & Client Presentation
The document provides an overview of the Dynamic Host Configuration Protocol (DHCP) including its history, operation, message types, client states, security considerations, and future developments. It also outlines testing procedures for DHCP clients and servers to validate their basic functionality and behaviors.
IP Subnetting
The document discusses IP subnetting, including:
1. IP classes and why subnetting is used to preserve public IPv4 addresses.
2. An example of subnetting a Class C IP address to create 5 networks, including reserving bits in the subnet mask and determining the resulting network ranges.
3. Another example of subnetting a Class C IP address to create network ranges for 50 hosts, again reserving bits in the subnet mask and determining the network ranges.
Dns presentation
This slide contains details about domain name servers (DNS).
It also contains Resolution of the Name Servers with Domain Name Structure with statistics table. The process of Name resolution is also explained with Recursive and iterative resolution processes.
DNS (Domain Name System)
A complete Coverage of DNS and its features. This ppt deals with well balanced practical and theoretical aspects of DNS. The best ppt for a novice learner.
Packet Tracer Tutorial # 1
The document provides instructions for setting up a network with 4 PCs connected to 2 switches, with the switches connected to a router. The key steps are:
1. Connect the PCs to the switches using copper cables and assign each PC an IP address from the same private IP range (e.g. 192.168.0.x).
2. Connect the switches to the router using copper cables. Configure the router interfaces with IP addresses from each private range and enable the ports.
3. Configure the default gateway of each PC to be the router IP that corresponds to its private IP range.
4. Add the private IP ranges to the router's RIP configuration to allow routing between the
Domain Name System DNS
The document discusses the Domain Name System (DNS) and its components. It explains what DNS is, how it works to translate domain names to IP addresses, the different record types used in DNS like A, NS, MX records. It describes DNS name servers, resolvers, zones and namespaces. It provides examples of DNS configuration files for both master and slave name servers as well as sample zone files mapping names to IP addresses.
Network Design on cisco packet tracer 6.0
This document proposes a network design using access controls and VoIP. It includes configuration of routers, switches, VLANs, DHCP, RIP routing protocol, frame relay, telnet, ACLs and VoIP protocols like Call Manager Express. The network connects three locations - a head office and two branch offices - using routers, switches, frame relay, VLANs and access controls to filter unauthorized traffic and allow only genuine users. VoIP is implemented using protocols like DHCP, Call Manager Express, phone directory and dial peer configuration to enable voice calls between the locations over the IP network.
Dns server
The document discusses DNS (Domain Name System) servers and how they work. It explains that DNS servers translate human-readable domain names to machine-readable IP addresses in 7 steps: 1) A request is made, 2) recursive DNS servers are queried, 3) root nameservers are queried, 4) TLD nameservers are queried, 5) authoritative nameservers are queried, 6) the IP address record is retrieved, and 7) the answer is received. DNS servers act like a phone book to lookup domain names and allow the internet to function by linking names to IP addresses.
DHCP
Dynamic Host Configuration Protocol (DHCP) is used to automatically assign IP addresses, subnet masks, default gateways and other network configuration options to clients on a network. DHCP reduces network configuration workload. It uses a four step packet exchange process during the initial IP address lease and will attempt renewal at 50% and 87.5% of the lease time. DHCP servers must be authorized in Active Directory to lease addresses. Scopes are configured to define address ranges for clients, reservations assign specific addresses by MAC address, and relays allow a single DHCP server to service multiple subnets.
Subnetting
Subnets divide a network into smaller sub-networks or subnets. Each subnet is treated as a separate network and can be further divided. When a packet enters a network with subnets, routers will route based on the subnet ID which is a combination of the network ID and subnet portion of the IP address. Subnets are only relevant for routing within an organization and are transparent outside the organization.
Wintel ppt for dhcp
DHCP automatically assigns IP addresses to computers on a network. It uses a four-step process (DHCP discover, offer, request, and acknowledge) to lease IP addresses with default durations of 8 days. DHCP servers maintain address pools and can grant static reservations. Relay agents are required for DHCP to function across routers by forwarding broadcast packets as unicast.
Dns
DNS is a distributed database that translates hostnames to IP addresses. It operates through a hierarchy of root servers, top-level domain servers, and authoritative name servers. DNS provides additional services like load balancing and mail server aliasing. Queries are resolved through recursive or iterative lookups between clients and servers to map names to addresses.
network Addressing
The document discusses IPv4 and IPv6 addressing. It covers key topics such as:
- IPv4 addresses are 32-bit and represented in dotted-decimal or binary notation. IPv6 addresses are 128-bit and represented in hexadecimal notation.
- Subnetting allows an IPv4 network to be divided into smaller sub-networks to reduce broadcast domains and improve performance.
- Network Address Translation (NAT) allows private IP addresses to be translated to public IP addresses, conserving public address space.
- IPv6 was developed to replace IPv4 due to the limited address space of 232 addresses in IPv4. IPv6 addresses issues each host a unique 128-bit address.
Network address translation
NAT maps private IP addresses to public IP addresses, allowing multiple devices on a private network to share a single public IP address to access the Internet. It is commonly used when there is a shortage of IPv4 addresses. There are different types of NAT, including dynamic NAT which maps private addresses to public addresses on a need basis, and NAPT which allows thousands of devices to share one IP address by also mapping port numbers. NAT solves issues like merging networks with duplicate private addresses and changing ISPs without renumbering an entire network.
Dhcp presentation
The document discusses the Dynamic Host Configuration Protocol (DHCP) which allows clients to obtain IP addresses and network configuration automatically from a DHCP server. It describes the DHCP operations, configuration steps including creating a DHCP pool, default gateway, and excluded addresses. It also covers DHCP scopes such as super-scope and multi-scope that span multiple subnets and multicast scopes using class D addresses.
Dhcp ppt
DHCP is a protocol that dynamically assigns IP addresses and other network configuration parameters to devices on a network. It uses a client-server model where DHCP clients make requests to DHCP servers which maintain pools of addresses. A DHCP client will broadcast requests at initialization and use a 4-step process to get an address assigned. It will later enter renewal states to extend its lease before initialization again if needed. This allows for efficient dynamic allocation and management of IP addresses on a network.
Ip addressing
IPv4 and IPv6 are the two main versions of Internet Protocol (IP) addresses currently in use. IPv4 addresses are 32-bit numbers expressed in dotted decimal notation, while IPv6 addresses are longer 128-bit hexadecimal strings. IP addresses are assigned to identify machines on a network and allow communication and transfer of data between devices.
Email server configuration on cisco packet tracer
Mail server configuration on cisco packet tracer. We configured the mail server on the cisco packet tracer.
Ip addressing
IP addresses are a unique identifier for devices connected to a network. They allow for the delivery of data packets across networks. The structure of IP addresses includes a network prefix that identifies the network and a host number that identifies the specific device. Techniques like subnetting, CIDR, and IPv6 were developed to address the limited available IPv4 address space and allow for more efficient allocation and routing of IP addresses.
Router configuration in packet tracer
- Packet Tracer is a program used to illustrate basic network concepts and allow users to build and test networks in real-time.
- A router is a networking device that connects different networks and selects the best path to forward packets between them based on its routing table. Cisco is the leading manufacturer of routers.
- There are different modes that allow administrators to monitor and configure routers, including setup, user, privileged, global configuration, and interface modes. Static and dynamic routing can be configured to determine the best paths between networks.
DNS Server configuration in cisco packet tracer
The document describes how to configure a DNS server in Packet Tracer. It involves building a network topology with PCs and a server, configuring static IP addresses, enabling the DNS service on the server, defining name-IP address mappings for each host, and testing domain name resolution by pinging hosts by name.
Dns server in packet tracer converted (labanna saha)
A DNS server translates domain names to IP addresses, allowing clients to access origin servers. The document provides instructions on configuring a DNS server in Packet Tracer:
1) Build a network topology with PCs and a server
2) Configure static IPs for each device and set the DNS server address
3) Enable DNS service on the server and define name-IP mappings for each host
4) Test domain name resolution by pinging hosts by name instead of IP.
More Related Content
What's hot
DHCP Server & Client Presentation
The document provides an overview of the Dynamic Host Configuration Protocol (DHCP) including its history, operation, message types, client states, security considerations, and future developments. It also outlines testing procedures for DHCP clients and servers to validate their basic functionality and behaviors.
IP Subnetting
The document discusses IP subnetting, including:
1. IP classes and why subnetting is used to preserve public IPv4 addresses.
2. An example of subnetting a Class C IP address to create 5 networks, including reserving bits in the subnet mask and determining the resulting network ranges.
3. Another example of subnetting a Class C IP address to create network ranges for 50 hosts, again reserving bits in the subnet mask and determining the network ranges.
Dns presentation
This slide contains details about domain name servers (DNS).
It also contains Resolution of the Name Servers with Domain Name Structure with statistics table. The process of Name resolution is also explained with Recursive and iterative resolution processes.
DNS (Domain Name System)
A complete Coverage of DNS and its features. This ppt deals with well balanced practical and theoretical aspects of DNS. The best ppt for a novice learner.
Packet Tracer Tutorial # 1
The document provides instructions for setting up a network with 4 PCs connected to 2 switches, with the switches connected to a router. The key steps are:
1. Connect the PCs to the switches using copper cables and assign each PC an IP address from the same private IP range (e.g. 192.168.0.x).
2. Connect the switches to the router using copper cables. Configure the router interfaces with IP addresses from each private range and enable the ports.
3. Configure the default gateway of each PC to be the router IP that corresponds to its private IP range.
4. Add the private IP ranges to the router's RIP configuration to allow routing between the
Domain Name System DNS
The document discusses the Domain Name System (DNS) and its components. It explains what DNS is, how it works to translate domain names to IP addresses, the different record types used in DNS like A, NS, MX records. It describes DNS name servers, resolvers, zones and namespaces. It provides examples of DNS configuration files for both master and slave name servers as well as sample zone files mapping names to IP addresses.
Network Design on cisco packet tracer 6.0
This document proposes a network design using access controls and VoIP. It includes configuration of routers, switches, VLANs, DHCP, RIP routing protocol, frame relay, telnet, ACLs and VoIP protocols like Call Manager Express. The network connects three locations - a head office and two branch offices - using routers, switches, frame relay, VLANs and access controls to filter unauthorized traffic and allow only genuine users. VoIP is implemented using protocols like DHCP, Call Manager Express, phone directory and dial peer configuration to enable voice calls between the locations over the IP network.
Dns server
The document discusses DNS (Domain Name System) servers and how they work. It explains that DNS servers translate human-readable domain names to machine-readable IP addresses in 7 steps: 1) A request is made, 2) recursive DNS servers are queried, 3) root nameservers are queried, 4) TLD nameservers are queried, 5) authoritative nameservers are queried, 6) the IP address record is retrieved, and 7) the answer is received. DNS servers act like a phone book to lookup domain names and allow the internet to function by linking names to IP addresses.
DHCP
Dynamic Host Configuration Protocol (DHCP) is used to automatically assign IP addresses, subnet masks, default gateways and other network configuration options to clients on a network. DHCP reduces network configuration workload. It uses a four step packet exchange process during the initial IP address lease and will attempt renewal at 50% and 87.5% of the lease time. DHCP servers must be authorized in Active Directory to lease addresses. Scopes are configured to define address ranges for clients, reservations assign specific addresses by MAC address, and relays allow a single DHCP server to service multiple subnets.
Subnetting
Subnets divide a network into smaller sub-networks or subnets. Each subnet is treated as a separate network and can be further divided. When a packet enters a network with subnets, routers will route based on the subnet ID which is a combination of the network ID and subnet portion of the IP address. Subnets are only relevant for routing within an organization and are transparent outside the organization.
Wintel ppt for dhcp
DHCP automatically assigns IP addresses to computers on a network. It uses a four-step process (DHCP discover, offer, request, and acknowledge) to lease IP addresses with default durations of 8 days. DHCP servers maintain address pools and can grant static reservations. Relay agents are required for DHCP to function across routers by forwarding broadcast packets as unicast.
Dns
DNS is a distributed database that translates hostnames to IP addresses. It operates through a hierarchy of root servers, top-level domain servers, and authoritative name servers. DNS provides additional services like load balancing and mail server aliasing. Queries are resolved through recursive or iterative lookups between clients and servers to map names to addresses.
network Addressing
The document discusses IPv4 and IPv6 addressing. It covers key topics such as:
- IPv4 addresses are 32-bit and represented in dotted-decimal or binary notation. IPv6 addresses are 128-bit and represented in hexadecimal notation.
- Subnetting allows an IPv4 network to be divided into smaller sub-networks to reduce broadcast domains and improve performance.
- Network Address Translation (NAT) allows private IP addresses to be translated to public IP addresses, conserving public address space.
- IPv6 was developed to replace IPv4 due to the limited address space of 232 addresses in IPv4. IPv6 addresses issues each host a unique 128-bit address.
Network address translation
NAT maps private IP addresses to public IP addresses, allowing multiple devices on a private network to share a single public IP address to access the Internet. It is commonly used when there is a shortage of IPv4 addresses. There are different types of NAT, including dynamic NAT which maps private addresses to public addresses on a need basis, and NAPT which allows thousands of devices to share one IP address by also mapping port numbers. NAT solves issues like merging networks with duplicate private addresses and changing ISPs without renumbering an entire network.
Dhcp presentation
The document discusses the Dynamic Host Configuration Protocol (DHCP) which allows clients to obtain IP addresses and network configuration automatically from a DHCP server. It describes the DHCP operations, configuration steps including creating a DHCP pool, default gateway, and excluded addresses. It also covers DHCP scopes such as super-scope and multi-scope that span multiple subnets and multicast scopes using class D addresses.
Dhcp ppt
DHCP is a protocol that dynamically assigns IP addresses and other network configuration parameters to devices on a network. It uses a client-server model where DHCP clients make requests to DHCP servers which maintain pools of addresses. A DHCP client will broadcast requests at initialization and use a 4-step process to get an address assigned. It will later enter renewal states to extend its lease before initialization again if needed. This allows for efficient dynamic allocation and management of IP addresses on a network.
Ip addressing
IPv4 and IPv6 are the two main versions of Internet Protocol (IP) addresses currently in use. IPv4 addresses are 32-bit numbers expressed in dotted decimal notation, while IPv6 addresses are longer 128-bit hexadecimal strings. IP addresses are assigned to identify machines on a network and allow communication and transfer of data between devices.
Email server configuration on cisco packet tracer
Mail server configuration on cisco packet tracer. We configured the mail server on the cisco packet tracer.
Ip addressing
IP addresses are a unique identifier for devices connected to a network. They allow for the delivery of data packets across networks. The structure of IP addresses includes a network prefix that identifies the network and a host number that identifies the specific device. Techniques like subnetting, CIDR, and IPv6 were developed to address the limited available IPv4 address space and allow for more efficient allocation and routing of IP addresses.
Router configuration in packet tracer
- Packet Tracer is a program used to illustrate basic network concepts and allow users to build and test networks in real-time.
- A router is a networking device that connects different networks and selects the best path to forward packets between them based on its routing table. Cisco is the leading manufacturer of routers.
- There are different modes that allow administrators to monitor and configure routers, including setup, user, privileged, global configuration, and interface modes. Static and dynamic routing can be configured to determine the best paths between networks.
What's hot (20)
Similar to DNS server configuration in packet tracer
DNS Server configuration in cisco packet tracer
The document describes how to configure a DNS server in Packet Tracer. It involves building a network topology with PCs and a server, configuring static IP addresses, enabling the DNS service on the server, defining name-IP address mappings for each host, and testing domain name resolution by pinging hosts by name.
Dns server in packet tracer converted (labanna saha)
A DNS server translates domain names to IP addresses, allowing clients to access origin servers. The document provides instructions on configuring a DNS server in Packet Tracer:
1) Build a network topology with PCs and a server
2) Configure static IPs for each device and set the DNS server address
3) Enable DNS service on the server and define name-IP mappings for each host
4) Test domain name resolution by pinging hosts by name instead of IP.
Dns server in packet tracer converted (labanna saha)
A DNS server translates domain names to IP addresses, allowing clients to connect to origin servers. The document provides instructions on configuring a DNS server in Packet Tracer:
1) Build a network topology with PCs and a server
2) Configure static IPs for each device and set the DNS server address
3) Enable DNS service on the server and define name-IP mappings for each host
4) Test domain name resolution by pinging hosts by name instead of IP.
DNS server packet tracer
The document describes how to configure a DNS server in Packet Tracer. It involves setting static IP addresses on PCs and a server, configuring the DNS server address for each device, enabling and configuring the DNS service on the server to map host names to IP addresses, and testing domain name resolution by pinging hosts by name.
Dns server converted
A DNS server translates domain names to IP addresses, allowing clients to reach servers. The document provides instructions to configure a DNS server in Packet Tracer:
1. Build a network topology with a server and two PCs, and configure static IP addresses for each.
2. Configure the server as the DNS server for the PCs by adding DNS entries that map the names and IP addresses of each device.
3. Test domain name resolution by pinging devices by name instead of IP address. Successful pings confirm the DNS server is functioning properly.
Dns server
A DNS server is a computer server that contains a database mapping domain names to IP addresses. It translates domain names to IP addresses, allowing clients to reach servers. It communicates with other DNS servers using special protocols. The document provides instructions for configuring a local network with one server acting as a DNS server, including setting static IP configurations and defining hostnames and addresses in the DNS server database. It concludes by suggesting testing domain name resolution by pinging hosts by name.
Dns server
A DNS server is a computer server that contains a database mapping domain names to IP addresses. It translates domain names to IP addresses, allowing clients to access websites and resources. The DNS server stores hostname and IP address mappings and communicates with other DNS servers using special protocols to resolve domain names into IP addresses for clients.
Dns server slide(h.m_merajul_hasan)
A DNS server contains a database of domain names and their associated IP addresses. It translates domain names to IP addresses, allowing computers to connect to servers. The main function of DNS is to translate domain names to IP addresses. Each domain nominates authoritative name servers for its DNS records. The document then provides instructions on configuring a DNS server on a generic server to map host names like "PC0" and "PC1" to their IP addresses, and testing the name resolution by pinging hosts by name.
Dns server in packet tracer by tanjilur rahman city university bangladesh
The document describes how to set up a DNS server in Packet Tracer to translate domain names to IP addresses. It involves building a network topology with a server and two PCs, configuring static IP addresses for each with the server acting as the DNS server, and testing domain name resolution by pinging hosts by name. When successful, the DNS service is resolving names to IP addresses correctly.
Networking For Application Developers by Roy Kim
The document discusses networking fundamentals and troubleshooting for application developers. It covers network components like switches, routers, subnets, and firewalls. It also explains protocols like TCP/IP, DNS, DHCP and how to troubleshoot issues with IP addressing, connectivity, name resolution and firewall rules using tools like ipconfig, ping, tracert and netstat.
main
The presentation summarizes DNS, SMTP, and POP3 protocols. It discusses configuring a local host file to map IP addresses to hostnames, setting up a DNS server using Bind on Windows 7, and interacting with an email server using SMTP and POP3 commands via Telnet. The objectives are to resolve hostnames, configure DNS, and send emails between mailboxes on the email server. Requirements include networked PCs and servers running Windows 7 with TCP/IP and an email server configured with user mailboxes.
DNS,SMTP and POP3
The presentation discusses DNS, SMTP, and POP3 protocols. It provides instructions on configuring a DNS server on Windows 7, including downloading and installing BIND, creating configuration files, and testing the DNS server. It also describes using Telnet and SMTP commands to send emails between servers, and creating a batch file to automate email messaging through the command prompt.
Applications.docx
Email clients allow users to communicate securely over the internet, share files, back up data, and keep records of business transactions. They support business growth by providing a platform for digital branding and advertising. Email clients make it easy to share different file types and media with remote clients. Data can also be backed up by emailing files to oneself.
Mail server
A mail server (or email server) is a computer system that sends and receives email. ... Mail servers send and receive email using standard email protocols. For example, the SMTP protocol sends messages and handles outgoing mail requests. The IMAP and POP3 protocols receive messages and are used to process incoming mail.
Dns
DNS stands for Domain Name System and translates domain names into IP addresses that computers can understand. It also provides a list of mail servers that accept emails for each domain name. Each domain name nominates authoritative name servers for its DNS records. The document discusses configuring a DNS by registering a website domain on a server with an IP address, connecting PCs and a switch to the server, and setting the DNS information on the nodes so resources on the website can be accessible to everyone.
Design of a campus network
This is an introductory presentation regarding the issues in designing a campus network infrastructure. Unlike theoretical approaches, this presentation actually was used to describe some of the real configurations performed by Server Administrators and Network Managers. This is for an introductory audience with very little background in computer networks assumed.
Email server design(h.m merajul_hasan)
This document provides instructions for setting up a mail server on Cisco Packet Tracer. It describes setting up 4 PCs, a mail server, and a DNS server connected by a switch. It explains assigning IP addresses in the same network to each device and configuring the mail server and DNS server with the domain name and IP addresses. Finally, it describes being able to send and receive emails between the PCs after setting up the mail accounts and services.
06 coms 525 tcpip - dhcp and dns
The Domain Name System (DNS) is a hierarchical distributed database that maps domain names to IP addresses. It uses a client-server model where clients submit queries and servers respond authoritatively. DNS provides mapping from human-readable domain names to numerical IP addresses to make the internet easier to use. It is a critical service that enables users to access internet resources by name.
How to link public addresses (real ip) to private ip or lan ip
The document provides instructions for configuring Network Address Translation (NAT) on a router to link private IP addresses on a local area network to public IP addresses. It describes adding two public IP addresses and a private address to the router's interfaces, setting a default route specifying one public address, creating a destination NAT rule to access an internal server via a public address, and source NAT rules to translate the internal server's address and other hosts' addresses to the public addresses.
Networking DHCP server Setup Reports
DHCP stands for dynamic host configuration protocol. What it does is dynamically assign network settings from a server. In other words, instead of having to configure the parameters related to how your computer communicates with a network, it happens automatically.
Assigning an IP address dynamically is the most basic piece but there is a lot more to DHCP. This includes the netmask, host name, domain name, gateway and name servers. In addition, DHCP can supply other information such as a time server.
Many people are anti-DHCP, because they see it as a way that an ISP offers you an IP address that changes. This, of course, makes it difficult to advertise a server. On the other hand, DHCP can save you a lot of ongoing configuration work within your company or organization.
Similar to DNS server configuration in packet tracer (20)
Dns server in packet tracer converted (labanna saha)
Dns server in packet tracer converted (labanna saha)
Dns server in packet tracer converted (labanna saha)
Dns server in packet tracer converted (labanna saha)
Dns server in packet tracer by tanjilur rahman city university bangladesh
Dns server in packet tracer by tanjilur rahman city university bangladesh
How to link public addresses (real ip) to private ip or lan ip
How to link public addresses (real ip) to private ip or lan ip
Recently uploaded
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaEmbedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Recently uploaded (20)
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
DNS server configuration in packet tracer
- 1. DNS server in Packet Tracer What is DNS and its purpose? DNS stands for Domain Name System. The main function of DNS is to translate domain names into IP Addresses, which computers can understand. It also provides a list of mail servers which accept Emails for each domain name. Each domain name in DNS will nominate a set of name servers to be authoritative for its DNS records. 1. Build the network topology. 2. Configure static IP addresses on the PCs and the server. Server IP address: 192.168.10.2 Subnet mask: 255.255.255.0 Default gateway: 192.168.10.1 DNS Server: 192.168.10.2
- 2. PC0 IP address: 192.168.10.3 Subnet mask: 255.255.255.0 Default gateway: 192.168.10.1 DNS server: 192.168.10.2
- 3. PC1 IP address: 192.168.10.4 Subnet mask: 255.255.255.0 Default gateway: 192.168.10.1 DNS Server: 192.168.10.2
- 4. Configure DNS service on the generic server. To do this, click on the server, then Click on Services tab. Click on DNS server from the menu. First turn ON the DNS service, then define names of the hosts and their corresponding IP addresses. For example, to specify the DNS entry for PC0: In the name and address fields, type: Name: PC0 Address: 192.168.10.3 Click on add then save. Repeat this for the PC1 and the server. Once you’re done, your DNS entries will look like this:
- 5. Finally, Test domain name – IP resolution. Ping the hosts from one another using their names instead of their IP addresses. If the DNS service is turned on and all IP configurations are okay, then ping should work. For example, ping PC1 from PC0. Ping should be successful.
- 6. Success! Success! Success! Success!