The document describes the process of designing a digipak for an artist's CD. Key details include:
- Measurements were taken of an existing CD case to use as guidelines.
- Photoshop was used to draw the inside and outside of the digipak and include labeling for features like where the CD goes and artist information.
- A color scheme requested by the artist was included for inspiration and continuity.
- Images, fonts, and colors were selected to showcase the artist within the design guidelines.
Etiqueta, Cerimonial e Protocolo - O Protocolo do Vinho - Artur Filipe dos Sa...Artur Filipe dos Santos
PROTOCOLO DO VINHO | Conselhos
úteis para organizar um jantar
Escolher vinhos para acompanhar um jantar nem
sempre é fácil, e tudo se complica quando se trata de
determinar a ordem dos mesmos. A operação pode
acabar por constituir um verdadeiro quebra-cabeças.
Aqui ficam alguns conselhos para fazer honra ao
paladar dos convidados.
AUTOR
Artur Filipe dos Santos
artursantosdocente@gmail.com
artursantos.no.sapo.pt
politicsandflags.wordpress.com
Artur Filipe dos Santos, Doutorado em Comunicação, Publicidade Relações Públicas e Protocolo, pela Universidade de Vigo, Galiza, Espanha, Professor Universitário, consultor e investigador em Comunicação Institucional e Património, Protocolista, Sociólogo.
Director Académico e Professor Titular na Universidade Sénior Contemporânea, membro da Direção do OIDECOM-Observatório Iberoamericano de Investigação e Desenvolvimento em Comunicação, membro da APEP-Associacao Portuguesa de Estudos de Protocolo. Membro do ICOMOS (International Counsil on Monuments and Sites), consultor da UNESCO para o Património Mundial, membro do Grupo de Investigação em Comunicação (ICOM-X1) da Faculdade de Ciências Sociais e da Comunicação da Universidade de Vigo, membro do Grupo de Investigação em Turismo e Comunicação da Universidade de Westminster. Orador e palestrante convidado em várias instituições de ensino superior. Formador em Networking e Sales Communication no Network Group +Negócio Portugal.
You’ve built a beautiful eCommerce store to sell your awesome products. Phew, hard part over you think, now all I have to do is sit back and watch the sales roll in. But nobody is visiting your site. And when they do get there, they leave without buying anything.
Here at GetApp we’ve put together 10 tips to help you promote your eCommerce store to get those visitors through your (virtual) doors and racing to the checkout.
2. Flatplan
I firstly measured around a CD case to get the
measurements. This would make my own product
accurate and look more professional. I took the
measurements down to later put then manually into
Photoshop to create a CD size.
3. Flatplan
I then drew around the CD once again to create the inside of the Digipak.
I then labelled
where all the
The design different
here is just features of the
rough and inside would be.
may Including: where
change on the CD
my final goes, informatio
product n on the
artist, picture of
the artist, name
of song etc...
I’ve also included once again the measurements so I could refer back to them
and stick to them. I have also created a colour scheme on request of the artist
and included it onto my Flatplan for inspiration.
4. Flatplan
I then drew around the CD once again to create the outside of the Digipak.
I have labelled the Once again I
barcode on my labelled where
Flatplan as it is a all the features
feature that must would go;
be used therefore including: name
I will not forget it. of the artist, a
I have also put the picture of the
website addresses artist, name of
down as they are the song,
important and certification,
requested by the barcode, website
artist. addresses etc...
I’ve also included once again the measurements so I could refer back to them and stick
to them. I have also used the colour scheme once again to refer back to, as these colours
were requested by the artist I need to stick to them as much as possible.
7. Inside
Although I haven’t stuck to my original colour scheme I have kept close enough, when I
tried using black as the background it looked too dark. So I used the colour sample tool on
Photoshop to take a silver/grey colour from one of the images I took of my artist.
The CD is blue which is the colour I used throughout with using the colour sample tool. As
much as possible I tried to stick to the colour scheme and therefore made the writing on
the CD silver.
I have included all the information I needed on the inside of the Digipak introducing the
artist and artists they have worked with.
The lines I have used were made in The signature at the bottom on the inside of the
Photoshop and are just to separate the Digipak is the actual signature from the artist. I
writing and the heading of the artist asked him to write his signature on a bit of paper
name. It is a simple effect but sticks to and after taking a photo of it uploaded it to
the colour scheme and helps to make Photoshop and edited it. I haven’t seen this done
the design look less bland. on many CD’s and therefore thought
it would be a good
idea and make the CD
look unique.
8. Inside
The picture I used was an
original image I took.
Although it is not the same Throughout I have used
style as the front cover I the same font to create
wanted to include it because continuality and to not
it shows my artist working. take too much attention
It shows he is devoted to his away from the
work and because he is not information.
making eye contact with the The artist name is in
camera it doesn’t take too black so it stands out; I
much attention away from would have used a
the information next to it. brighter colour but it
I put it around a border wouldn’t have followed
which is the same colour I my colour scheme.
have used throughout. Therefore I thought
Although this is just a simple black would be most
effect I think it works to appropriate.
break the inside down.
10. Outside
On the outside of my Digipak I have stuck to all the colours in the colour scheme: blue,
silver, black. Although the background is not quite black its not far off. The black I originally
tried didn’t look right and made the whole production look bland.
I have included the ‘parental advisory explicit content’ certificate
because some of the lyrics are inappropriate for a younger audience.
However the artist is aiming at an older audience.
The barcode I have included was created online at:
http://www.barcodesinc.com/generator/index.php I thought it
would be a cool feature to have and makes the Digipak unique to
the artist.
I have included the website addresses for YouTube
and Facebook where the music video can be found.
My artist asked me to include both of these sites to
advertise him, I thought putting this at the back of
the Digipak would be the best place. I am also
planning to put it at the end of my music video.
11. Outside
On the back I included an image of my artist
and the feature artist together. This is to
show both artist and so when the video is
published the target audience will know who
is who. I once again added the border
around just for effect and to make it stand
out.
The font throughout the Digipak is all the same to make it look more professional. Overall
I am happy with my whole design because although I haven’t used bright colours I still
think my design stands out as it is simple yet noticeable.
I have used a range of images of the artists featured on “shot facts” which show the artist
in different aspects – an extreme close up of the main artist so we know who he is, an
image of him working on his music and an image of him working alongside an artist.
I have stuck to the colour scheme blue black and silver as well as possible and I think this
is an advantage as continuity throughout will help the CD to look more unique and
noticeable.