Ganesh Narendra Salvi is seeking a position as an Operation Supervisor - Engineer in the oil and gas sector. He has over 18 years of experience in control panel operations, process operations, and field operations in oil and gas plants, pipelines, and terminals in India and the Middle East. His experience includes monitoring equipment and processes, starting up and shutting down units, and ensuring safety systems are functioning properly.

1. Ganesh Narendra
Salvi
Priya-A-101, Plot No.46/47, Sector-4,Vijay Marg, New Panvel(EAST), Navi-Mumbai,
Maharashtra, India410206.
Phone numbers- India(R)-91-22-27450004, (M)-91-9869845284,
E-mail - ganesh2682002@yahoo.com
Objective To seeking a position in a reputed organization in the field of
Oil & Gas sectors as a ‘’OPERATION SUPERVISOR - ENGINEER .
Total No. Years
Of Experience 18 Years.
Experience Panel Operator.
Since July 23, 2016. ADGAS ABUDHABI At Das Island
through CEGELEC ACTEMIUM Abudhabi UAE.
LG7 Project - Gas Based Power Plant – 36 MW (Offshore Base).
Job Responsibilities / Duties – Monitoring & Controlling Process /
Equipments & its parameters through Control Panels.
Control Panel Systems Exposure
1.DCS Honeywell – Through this system, handling & controlling
total plant equipments, auxilliaries like Gas Turbo
Generation,Primary Fuel Gas Conditioning Unit, Its heating section,
HP/LP Filters, Fuel Gas Booster Compressors its oiling & sealing
systems, Machinery Protection Systems, Emergency Diesel
Generators, Partial stroke tests of valves, Plant ESD C & E, Override
Switches (MOS), Fire & Gas C & E, Machinery Protection Systems of
Booster Gas Compressors.
2.Mark 6 Panel – Turbine & Generator –
Through this system, Controlling & Monitoring parameters
(status/condition) of Turbine/Generator/Gear box & their auxilliaries
like fuel gas, liquid fuel, air systems, auxilliaries lube oil systems,
turbine lube oil systems, vapour separator, scrubber systems,
hydraullic systems, hydraullic ratchet systems, air/oil cooler
systems, enclosure vent ventillation systems.
Check ups for start up, cranking, ignition,load,trip. Observing
Graphics / Trends / Alarms.
3. HWC ESD/F&G Matrix Panel.
Through this system Controlling & Monitoring Fire & Gas zones,
ESD for Booster skids ,GTG, HP/LP Gas , PFGCU Unit, EDG, Fuel Gas
Booster blow down, Total Plant. Operating , Overrides for ESD /
Fire & Gas Systems.
Operation Engineer.
March 2013 – July2015, ANADARCO OIL CORPORATION Through
PETROFAC International LLC (UAE )
ELMERK – Algeria (Africa). CPF Project. ( Central Processing Fascility -
OIL & GAS ).
Job responsibilities / Duties – Field Operations of NGL(Natural Gas
Liquid) Plant, Operations of Turbo Expander & Compressor, Absorber
column, De-Ethaniser Column, De-Butaniser column, Reflux drum,
Reboilers, Gas – Gas
Exchangers, Gas – Liquid Exchanger, LPG Storage & Exports.
GAS Process Area. Operations of equipments from Field, Controlling
Process parameters if any deviation & its corrective action, Minor
Maintenance, Sampling.
Units Exposure – Associated Gas Compressors (2 Stages) Booster Gas
Compressors (Single Stage), Injection Gas Compressors(2 Stages),
Residual

2. Gas Compressors(2 Stages).Gas Dehydration Unit.
Equipments / Process Systems - Lube oil & Seal gas systems of
compressors, Safe guarding systems of compressors, Antisurge systems
of compressors.
Heating / Cooling Cycles & Regeneration gas compression of gas
dehydration unit.
Knock out drums, Finn-Fan coolers, Condensate Pumps, booster skids,
Molecular sieve beds, Heater(Furnace), Separators, Coalescer,
Shutdown
valves, Blowdown valves , Pressure Safety valves.
Oil Process Area – Exposure to Oil Trains ( 2 Nos.), Equipments – HP
Separator Pre Heater, HP Separator, Desalters (1st
& 2nd
Stages), Oil
stabilizer Pre-Heater, Oil Stabiliser Column, Reboiler, Flash Heater, Oil
Transfer surge drum, Condensate drum, Oil & Condensate run down
coolers.
Oil / Gas / Condensate Inlet Reception – Primary & Secondary
Separators.
Chemical Injection Skids.
LPG / OIL /Condensates Storage & Export Systems, Metering skids, Flare
K.O.D.s, Fuel Gas Systems.
Safety Systems – Fire Hydrants & Deluge Systems.
DCS / PANEL Operator.
Since June1,2011 - November22,2011, G.S. Engineering & Corp. Ltd.
Abudhabi – U.A.E.
TAKREER GDP(Green Diesel Project) Utilities/Offsites.
Job responsibilities / Duties – Controlling Utilities from DCS –
Nitrogen Package,Boiler feed water pumps, turbine pumps, Instrument
air, cooling water pump,
Steam supply controlling from existing refinery to the project
System Handled – Foxboro Invensys – I/A Release:8.4.3 , Version 10.2.1
Field Operator / DCS Operator
November 2009 – April2010, Tecnicas Reunidas Abudhabi – U.A.E.
BORUGE 2 – Project, Utilities / Offsites / External Interconnections.
Job responsibilities / Duties includes to run air compressors – 3 nos.
of capacity 22000Nm3 each, observe & note down its parameters &
any abnormality – Continuously, start up / shutdown, change over,
trouble shooting & necessary
Actions, minor maintenance, self & equipment safety.
Cooling tower operations, sea water system and CCCW system.
Field Operator / DCS Operator
November2007 - March2009, Dodsal Engg. & Cont.Pte.Ltd. Abudhabi
-U.A.E.
Project - IRPP (Inter Refinery Cross Country Pipelines &
Dispatch/Storage of Petrolium Products Terminal. Client – TAKREER.
Job responsibilities / Duties includes all terminal activities like Product
receipt operations-
Lineup the terminal tank from battery limit, online sampling,
Product storage operations- to check sufficient ullage (cross check),
sampling, water draining, stock record,
Additive skids operations – dye injections to ULG95/Gasoline91, stadis
to JetA1, lubricity improver & pour point depressant to Gas oil,
corrosion inhibitor to pipeline (non coating)

3. Line up from skid – pump to respective tank, checking of dosing rate
calculation.
Product dispatch operations – line up from terminal tank – booster
pump – flow meter skids – filter coalescer – mainline pump to battery
limit valves. Tank to tanker loading,
Arm connections, Qty. check.
Other Operations – booster/mainline pumps start/stop, recording
pumps parameters, routine maintainance work like filter/strainer
cleaning, storage tank cleaning. Intermittant pigging operations
DCS OPERATIONS – These operations are done from control room by
automation includes line up of storage tanks for filling, emptying & idle
stage, Inter tank transfer,
Dispatch to oil depots-airports, running of pumps status-abnormalities if
any, trends &
Graphs, trips, cause & effects, ESDs, tank gauging system, fire & gas
system, SCADA operations-SVs monitoring, permissive commands,
Well exposure to pre-commissioning/commissioning activities, plant
startup procedures, & operating philosophy, safe workouts, terminal
emergencies, PTW systems.
Production Operator / Chemist
February1998 – November2006, BASF India Ltd, Turbhe, Navi Mumbai,
India
Job duties include – process reaction controls by PLC operation.
Control process abnormalities & take corrective actions, maintained
records of process log sheets, stocks of storage tanks, inventories,
hazardous chemicals safe handling practices, equipment
safeguarding, minor maintainance , maintained quality system
practices, safe workouts, emergency & rescue operations.
Process Engineer
March1997 – May1997, I-HWA Industries Ltd, Hsien Taiwan
Safe work practices, process reaction control, maintained log sheets &
ISO quality systems.
Production Operator / Chemist
December1994 – March 1997, Jaysynth Ltd, Rasayani MIDC – Raigadh,
India
Process reaction control, cynation reaction handling, safe workouts,
minor maintainance jobs, effluent control, record log sheets.
Production officer
July1992 – November1994, Hico Products Ltd, Khopoli – Raigadh, India
Job-duties includes all production related activities like process
reaction control, control various reactions, stocks of the tanks, tanker
unloading, maintenance planning, maintained records of shift reports,
production report, material receipts, safe practices Workouts.
Task & Duties Checks and observes on a ongoing basis, the proper
functioning of assigned equipment by reading gauges, levels,
amperages and recording such findings on a log sheet, identifying the
equipment, the specific readings and time and date of occurrence.
Informs the Shift Supervisor of any unusual observations such as noise,
spillage, critical gauge readings and leakage, making process
adjustments in accordance with instructions from the Shift Supervisor.
Performs hand-over activity at the end of his shift to ensure that his
replacement is aware of any condition that require special attention in
order to maintain safe and efficient production.
Assists in the preparation for maintenance of assigned static
equipment in accordance with Daily Instructions by performing under

4. detailed instructions a number of preparatory activities such as purging
of vessels, closing of valves, draining of pumps and cooling down
heaters. Continuous monitoring of on-going maintenance activities in
the designated work area and commissioning of repaired or
maintained equipment to ensure functionality of redundancy.
Takes and records in fields a variety of parameters as required a
variety of readings, such as gas flows, temperatures, levels, flow rates
and vibrations, and records unusual occurrences & reporting them to
Control Room.
Starts up, shut-downs, isolates and adjusts flow rates, levels and
temperatures on pumps, motor, tanks, compressors and as instructed.
Manually adjusts or assist others in adjusting a variety of valves
governing rates of flow, levels of pressure and chemical feed, to ensure
correct output. Takes independent action to ensure the maintenance
of specified operating conditions and mixing and adjusting chemical
feed, lubricating various mechanisms as required.
Responsible for the support of Company Safety, environment and
Quality policies and programs, and carrying out specific duties and
responsibilities related to his job as spelled out in Management system
documentation policies, procedures, local documentation,
Management System Manual, Safety manual and other related
documents.
Operations & Power Plant Operations, NGL Plant Operations, Cross-country pipeline
operations, tank form operations, tanker - loading/unloading,
distillation (plain & vacuum), dehydration, stripping, condensation,
drying.
Equipments Gas Turbine, Generator,Turbo Expander & Compressor, Heavy
duty pumps of capacity-221/243m3/hr, air compressors of capacity
22000Nm3 , cooling / dryer package, coriolis mass flow meters, filter
coalescers, fire water diesel pumps, motor operated valves, control
valves, ESDs, reactors, thermic fluid heaters, air compressor, chilling
unit, ejectors, blowers.
Control Systems /
Exposure DCS / SCADA – Foxboro Invensys, Yokogawa, Honeywell, MOV control,
TGS. Safety – fire water & foam, inergen fire protection, fire & gas,
deluge. Electrical – 11KVA, emergency DG, earthing & lightning
protection, cathodic protection, heat tracing, HVAC.
Area / No. Of Production process – Chemical Plants, Petroleum products terminal
Years Experience & Cross-country pipeline operations, Utilities / offsites, GAS Plant.
18 Years.
Date of Birth/ June1, 1970
Age 46 Years.
Trainings SCABA, First Aid, Flow Serve Pumps (O&M), Fire Fighting’s.
Completed
Education B.Sc. (Chemistry) – From University Of Mumbai – April, 1992.
H.S.C. (High school level - 10+2) – Mumbai Board – March, 1989.
S.S.C. (School level – 10) – Mumbai Board – March1987.

5. Computer Literacy/ Certificate course – Computer office automation –
CDAC – July2005
Certification Programming C++ course – NIIT - July 2007
Passport Details Valid up to 2024.
Marital Status Married
Interests I am interested to work on a offshore oil / gas platforms,
oil/gas exploration field or
In the field of safety in oil /gas sector for suitable position.
References References are available on request.
Mr. Ganesh Narendra Salvi.
India -(M)+919869845284.
Email – ganesh2682002@yahoo.com

6. Computer Literacy/ Certificate course – Computer office automation –
CDAC – July2005
Certification Programming C++ course – NIIT - July 2007
Passport Details Valid up to 2024.
Marital Status Married
Interests I am interested to work on a offshore oil / gas platforms,
oil/gas exploration field or
In the field of safety in oil /gas sector for suitable position.
References References are available on request.
Mr. Ganesh Narendra Salvi.
India -(M)+919869845284.
Email – ganesh2682002@yahoo.com