Erman Medrano Manguiat is a Filipino mechanical technician with over 30 years of experience maintaining and repairing rotating equipment such as pumps, compressors, gas turbines, and generators in oil refineries and gas plants around the world. He has worked for companies in the Philippines, South Korea, Qatar, Saudi Arabia, Russia, Abu Dhabi, Kuwait, Libya, and more. His expertise includes overhauling various machinery, checking clearances, performing alignments, and commissioning new equipment.

1. PERSONAL DATA:
Name : ERMAN MEDRANO MANGUIAT
Date of Birth : 02 September 1965
Place of Birth : Batangas, Philippines
Nationality : Filipino
Marital Status : Married
Phone No. : 09487573409/09097965078
Email : ermanmedranomanguiat@yahoo.com
TAGET JOB/POSITION:
1. Senior Mechanical Technician
2. Rotating Equipment Technician
EDUCATIONAL BACKGROUND:
Mechanical Technology
Samson Technology Institute
TRAINING AND SEMINAR:
T-Bosiet Opito
H25 Training Certificate
Huet / Sea Survival
Fier Fighting
First Aid
WORK EXPERIENCE:
 April 9,2013-July 11, 2014
HYYUNDAI Shipyard/KENT South Korea/Qatar
Barzan Project Commissioning
Mechanical Technician

2. Provide timely and accurate information on Mechanical equipment issues that
may impact CSU and participate in the relevant CSU progress meetings where
requested.
Analysis and review of existing Project Completions Dossiers and system report
relating to the commissioning and start up scope.
Verify that all Mechanical equipment hardware systems are commissioned,
handed over and accepted in a timely manner, ensuring quality and completion of
handover dossiers and agreed punch lists.
Provide guidance and support to the Offshore Operations team members on
system acceptance activities of rotating equipment.
Assist in the preparation of Pre-Ownership punch list for each block of systems.
Assist in the review and close out of any Punch List items.
Assist in the review and close out of Site Queries.
Assist in the review and close out technical Verification lists.
Working closely with Project and Operations discipline personnel across the
assets to identify the scope and interface requirements for each of the commissioning
and start up milestones.
Become fully familiar with their relevant asset start up manual and provide
discipline support during the facility start-up.
Work closely with project and operations to help develop SU teams skills and
competency requirement for initial start-up.
HSE
 Demonstrate a positive and pro-active commitment to HSE through the personel
application of safety critical behavior;
 Applying Shell HSE Policies and Management System Requirement;
 Supporting/Participating in Emergency Drills and Exercises as required.
 Regulatory and procedural materials for mechanical equipment sysytems.
 Mechanical equipment of production facilities and applicable maintenance rules;
 Design, operating principle and specifications of rotating equipment;
 Typical failure modes and troubleshooting procedures; root cause analysis (RCA)
basics.
 Knowledge of Mechanical Engineering;
 Mechanical equipment installation, adjustment, modification and repair methods;
 IT/SAP PM systems, as it applies to the requirements of the position;

3.  November 9, 2012-March 2013
STATTSOLIE Refinery
Surname South America
Rotating Machinery Supervision
Supervise all Rotating Machinery Erection
As per Installation Drawing & Blue Prints
Inspect Also As Per Packing List
 April 26,2010-November 16, 2011
Qatar Petroleum
North Field Alpha
Doha Qotar
Offshore
Mechanical Technician
Assigned in Maintenance Department repair/overhauled rotating machinery
such as single and multi stage and compressor gas turbine. valves stationary
equipment.
 August 12, 2008-August 25, 2009
Al-Suwaidi Industrial Services
Saudi Petrochemical Industry
Al-Jubail K.S.A
Senior Mechanical Technician
Repair/overhauled rotating machinery, such a single and multi stage
pumps and compressors,
Steam turbine (mhi) gear boxes
 September 12, 2007 to February 5,
Bandariyah International Com.
Senior Mechanical Technician
Gezan Power Plant K.S.A
Major overhaul of frame 5,6,7 G,E gas turbine and generator
 From June 15 to November 19, 2006
Bechtel Enka Technostroyer Export
OPF Phase 2 Project
Sakhalin Russia
Commissioning H25 turbine and auxiliary such as lube oil coolers, fuel
gas valve skid, oil mist separator, caterpillar emergency generator , condensate
centrifugal pumps, vertical and horizontal, Flowserve multi stage booster pump.
 February to November 2005
Mechanical Technician
Foster Wheeler ADMA- OPCO PROJECT
TOTAL ABK COMPLEX
OFFSHORE< ABU DHABI

4. Commissioning of OKGD gas production at TOTAL ABK, Commission
Alston Gas Turbine and all auxiliary such as fire pump centrifugal condensate
pump. Funch Listing catcher, headers, Preparation of operational test
procedure, line flushing, mechanical handling testing. Line trucking.
 February 16-May 18,2004
Mechanical Technician
Shadow Project
ADGAS LNG PLANT
Train 1& 2
Das ISLAND Abu Dhabi U.A.E
Duties And Responsibilities
Responsible for the maintenance and repair of different motor Pumps and
other jobs such as:
 Check and secure all work permits
 Check alignment between pump hub and and turbine motor hubs by using
dial gauge. Vernier caliper Thru reverse alignment method and adjust if
necessary.
 Check Motor pumps and turbine thrust and journal bearing clearances by
using plastic Gauge, lead wire and measuring thru outside Micrometer.
 Scrape, clean pump and motor base plate in preparation for installation.
 Clean and oil filling of bearing housings.
 Dismantling and installation of pressure safety valves and changing of
new gasket.
 Ensuring good housekeeping practice as soon as job are finish.
 Ensure to the plant operator that the machineries are in good and
operating condition.
 Close all works permits, as soon as job are done.
 All in all Mechanical and repair/maintenance jobs
 17 ,2001 to February 2002
Mechanical Technician
Commissioning Project
Euro Mechanical (EMEC)
Borouge Project RUwais UAE.
Duties and Responsibilities
Responsible for the maintenance an repair of different motor Pumps and
other jobs such a:
 Erase and grease all valves such as gate valves, butterfly valves and
motorized valves.
 Check some leaking flanges, valves and tighten equally if deemed
necessary.
 Realignment of Pumps and motor Hubs.
 Fabrication of Spools if deemed necessary.
 April to June 2001

5. Mechanical Technician
Al Otaiba
ADGAS Central Workshop
Das Island, Abu Dhabi U.A.E
Duties and Responsibilities
Responsible for the maintenance and repair of different motor Pumps and
other jobs such as:
PUMPS
 Ensuring that Works Order is available with the Foreman
 Record all initial reading, measuring before dismantling equipment
 Overhaul Dismantle Single and Multi –stage pumps and steam Turbines
 Maintain clearances and adjust if deemed necessary
 Dismantling of pumps, removal of Coupling Hubs, Bearing housing lower
bearing
 Clean impellers, check wearing of Ring Clearances by using Blue
 Cleaning of shafts in preparation of changing gasket.
TURBINES
 Dismantled/ Box up as per manuals specification
 Carry out all measurement and clearances
 Check/Replace of Journal and Thrust Bearings
STATIONARY EQUIPMENT
 Repair/Dismantle Pressure Safety Valves, Lupping Valves seat and Dis
 Compressor Valves cleaning and Lupping
 Operate Hydro drill for cleaning tube bundles on heat exchanger
 November 2000 to January 2001
Mechanical Technician
DOPET
RAS Gas LNG Plant
Ras Laffan, Doha Qatar
Duties and Responsibilities
Responsible for the maintenance and repair of different motor Pumps and
other jobs such as:
 Dismantled / Box up as per manuals specification
 Carry out all measurement and clearances
 Check/Replace of Journal and Thrust Bearings
 October 1998 to November 1999

6. Mechanical Technician
Al Meer Technical Services
Kuwait Oil Company
Ahmadi, Kuwait
Duties and Responsibilities
Assigned every planned maintenance jobs such as an intermediate and
major overhauls or all major rotating reciprocating equipment such as:
 GE Gas Turbine (Frame5) MS 5002 perform overhauling of Turbines,
checking of bearing clearance, tip clearance of blades in the rotor and
stator, inspection nozzle blades.
 Combustion liners, Transition pieces and Rotor buckets by the dye
penetrant method. It also includes leveling and alignment of the
accessories and the compressor.
 Perform the overhaul of the Cooper Beseemer Integrals Gas
Engine/Compressor Unit Type GMWA 82000 HP and the auxiliary
equipment. Leveling , alignment and rebuilding of the multi-stages
compressor, installation of auxiliary equipment starter up and
commissioning of the whole unit.
 Perform and overhaul of Kawasaki Centrifugal Compressor Type RBGS
APC 885 and RB &B HP Compressor including checking of bearings.
 Solar Centraur Gas Turbine
 Thommassen Gas Compressor
 Steam Turbines
 March 1997 to December 1997
AMMCO
AR-RAZI Methanol
Jubail, KSA
Duties and Responsibilities
Shotdown crew working in AR-RAZI for overhaul. Dismantling of multi
stage centrifugal gas compressor (Dress Rand)
 Check the initial alignment reading between the load coupling
 Remove the coupling hub by using hydraulic pusher
 Dismantle outer and inner seal rings. Labyrint (Inner and outer pads)
 Record all deep measurement for all spares that we remove
 Clean all spare parts
 Take allowable alignment of local coupling between gas Turbine and gas
Compressor considering thermal heat.
 August 1995-January 1996
Millwright Maintenance
SIRT OIL Company
Libya

7. Duties and Responsilbilities
 Major overhaul G.E frame 3 Gas Turbine and multi stage gas compressor
(NOUVO PIGONE)
 February 1994-February 1995
Millwright Foreman
AL SUWAIDI
Sadaf Petronim Shell Project
Jubail KSA
Duties and Responsibilities
Assigned in preventive maintenance for repairing and dismantling of
pumps. Compressors, cooling tower fan gear boxes and reconditioning of relief
valves.
 July 1990-June 1992
Mechanical technician
AL-HUGAYET
Khafji, KSA
Meelsa (Dammam) KSA
Duties and Responsibilities
Assigned in preventive maintenance workshop for maintaining all rotating
machineries and equipment such as pump motors, gas turbine compressor (Air &
Gas)
 Febraury 1982-December 1987
Mechanical Technician
CALTEX Refinery
Batangas, Philippines
Duties and Responsibilities
Repairing and dismantling Centrifugal, Reciprocating pumps,
Compressors, Motor Gear Boxes, Cooling Tower fan, mob blowers, Turbine
and recondition of relief valves and fitting/welding jobs.
I certify that the above information is true and correct.
Erman M Manguiat