The document contains the resume of Osumanu Basiru. It summarizes his work experience as a Senior Operator at ADNOC subsidiary Abu Dhabi Gas Industry (GASCO) in the UAE since 2012, where he has responsibilities like monitoring facilities and providing work instructions to operators. It also outlines his previous role as a Senior Production Operator at a petroleum refinery in Ghana from 2006 to 2012.
Chirag darji resume for production operator (oil & gas)CHIRAG DARJI
I have 16+ years experience in OIL & GAS, REFINERY, PETROCHEMICAL with precmmissioning, commissioning, start up as a OPERATOR.
I am actively looking for a job AS PRODUCTION OPERATOR.
Please consider my profile if there will be any requirements related to me.
REGARDS,
CHIRAG R. DARJI
India Contact No:+919974063315/+919974063314
chiragv_darji@yahoo.co.in
SKYPE ID: chiragcool2009
Distillation is one of the widely used separation method in most of the chemical process industries. Improper design
/operation & maintenance leads to various troubles like reduced plant capacity, poor quality of separated products,
high energy (utility) consumption, etc.
Revamp objectives
Revamp Philosophy
Revamp options
Semi-Regenerative Reforming Unit
Typical Flow Scheme
Continuous Reforming Unit
Typical Flow Scheme
Revamp to Hybrid Operation
What may be achieved?
Typical C5+ Yield at Decreasing Pressure
Changes Required for Full Conversion
Typical Benefits of Full Conversion
Revamping of Existing Continuous Reforming Units
Fired Heaters Revamp
Burners
Reactor Options
Regeneration Section
Summary
Study 5: Pre-commissioning Safety Review
CONTENTS
5.0 PURPOSE
5.0.1 Team
5.0.2 Timing
5.0.3 Preparation
5.0.4 Documentation
HAZARD STUDY 5: APPLICATION
5.1 TOUR OF THE PROJECT
5.2 REVIEW OF HAZARD STUDY 5
Chirag darji resume for production operator (oil & gas)CHIRAG DARJI
I have 16+ years experience in OIL & GAS, REFINERY, PETROCHEMICAL with precmmissioning, commissioning, start up as a OPERATOR.
I am actively looking for a job AS PRODUCTION OPERATOR.
Please consider my profile if there will be any requirements related to me.
REGARDS,
CHIRAG R. DARJI
India Contact No:+919974063315/+919974063314
chiragv_darji@yahoo.co.in
SKYPE ID: chiragcool2009
Distillation is one of the widely used separation method in most of the chemical process industries. Improper design
/operation & maintenance leads to various troubles like reduced plant capacity, poor quality of separated products,
high energy (utility) consumption, etc.
Revamp objectives
Revamp Philosophy
Revamp options
Semi-Regenerative Reforming Unit
Typical Flow Scheme
Continuous Reforming Unit
Typical Flow Scheme
Revamp to Hybrid Operation
What may be achieved?
Typical C5+ Yield at Decreasing Pressure
Changes Required for Full Conversion
Typical Benefits of Full Conversion
Revamping of Existing Continuous Reforming Units
Fired Heaters Revamp
Burners
Reactor Options
Regeneration Section
Summary
Study 5: Pre-commissioning Safety Review
CONTENTS
5.0 PURPOSE
5.0.1 Team
5.0.2 Timing
5.0.3 Preparation
5.0.4 Documentation
HAZARD STUDY 5: APPLICATION
5.1 TOUR OF THE PROJECT
5.2 REVIEW OF HAZARD STUDY 5
24 Diapositivas sobre las propiedades de los átomos con imágenes y una breve explicación sobre lo que es un átomo.
Toda la información fue tomada de Internet.
ONGC_ internship _ report please don't edit directly make a copy of this file...
CURRENT CV1 2015
1. Osumanu Basiru.
Ocean Terrace, Al-Reem Island,
P.O. Box 665,Gasco,
Abu Dhabi, UAE.
Cellular 00971509125702
Cellular 00971529120816
Cellular 00233244014293
gimah2013@icloud.com
gimah2002@gmail.com
Senior Operator (DCS)
SUMMARY
I have 7years working experience in commissioning and operation of residual fluid catalytic
cracking (RFCC) plant in a petroleum refinery in Ghana and currently working with ADNOC
subsidiary Abu Dhabi Gas Industry (GASCO) in UAE as a panel operator (DCS). I was part
of the key leading team members in pre-commissioning and commissioning of habshan5
plant from 2012 to 2013.My career objective is to become a successful charted engineer and
to be part of organisation who believes success as a need and work hard to achieve it.
EXPERIENCE
Company:
Subsidiary:
Period:
ADNOC(Group).
Gasco, Habshan5-Abu Dhabi.
April 2012 - present.
Position:
Senior Operator (DCS).
Job purpose & Scope:
Operates, monitors and controls facilities like Gas/Liquid dehydration and De-mercury unit,
NGL recovery unit, Condensate Stabilization unit, Gas compression unit, Sour water
treatment unit, Fuel gas unit, Rich and lean acid gas removal unit, NGL storage and export
unit, Flare system, Pipeline launcher in the respective Plant areas, providing work
instructions, as necessary to operators, take corrective actions during emergency situations
and Plant abnormalities in accordance with standard operating procedure and standing order.
Specific duties:
Provide work instruction and guidance to assigned operators and ensure their work is
conducted inline with standard operating procedures, established program and
supervisory instructions complying with health safety policy.
Operate the plant to meet the expectation of the customer in the areas of sales gas,
liquid sulphur and lean gas.
Controls and monitors plant process instruments such as Pressures, temperatures,
levels, flows etc., and ensures periodic logging of parameters, look out for any
abnormalities for smooth and efficient running of Plant and the equipment’s.
Perform regular plant maintenance and operations changes with the consent of senior
2. operation Engineer.
Minimizing emission and treating process effluent.
Ensure plant is operated and maintained in compliance with regulatory requirements.
Carry out plant start-up and shutdown base on standard operating procedure.
Co-ordinate with other existing plant for feed and product distribution.
Changing the operating mode to meet NGL product specification demand by
downstream plants.
Determine Specification of Product in Plant by the help of Gas/Liquids analyser's and
lab results.
Review, Validate, Sign off existing standard operating procedures.
Suggests modifications for improvement of overall Plant efficiency
Isolate systems, Piping and LOTO by co-ordinating with field operators and
maintenance personal.
Explain/Troubleshoot Plant Process, Compressors, Pumps, Controllers, and BMS
Panels etc.
Managing the NGL sphere and its export.
Adjust process parameters base on lab analysis, feed and product analysis if required.
Ensure proper shift handover as per the standing procedure
Develop UAE nationals by sharing knowledge and expertise for their integration and
give training to new employees, students or groups on excursion.
Organize and write field and DCS daily activities for shift controller's report.
Ensure that work carried out by maintenance personnel is in accordance with the
company safety regulations and standard procedures by coordinating with the field
operator and parties involve.
SIGNIFICANT ACHIEVEMENT IN THIS POSITION:
I made changes on the plant design process logic to reduce flaring and total plant
shutdown during plant upset and emergencies (AGR and NGL contingency plan).
Optimized production by improving on design process parameters.(parameters for
NGL recovery and rejection).
Develop a procedure for propanisation of 3stage propane compressor base on
practical experience.
Lead a team who help to change systemlogic, start-up and shutdown procedure of
3stage propane compressor base on practical experience.
Help to reduce the daily alarm received per console through alarm management
to suit the process and operation in other to ensure process flexibility and safety.
Updated NGL standard operating procedure base on practical experience.
Part of team who did DCS control logic confirmative for Gas and Liquid dryer
sequence.
Recovered more than 99% Propane (C3) and 89% Ethane (C2) from natural gas
without expander.
Lean Amine Units Operation Optimization.
TRAINING
Topic
Trainer Location Period
3. Gas and Liquid molecular sieves.
C.Engineering. Habshan5-Abu Dhabi. 3/01/13.
Expander operation and troubleshooting. Mafi-
Trench Vendor Habshan5-Abu Dhabi. 19/12/12.
Anti-surge/performance/load shading controller operation. CCC
vendor. Habshan5-Abu Dhabi. 23/11/12.
Otlorf RSP (NGL recovery and rejection operation and troubleshooting) Otlorf
Vendor. Habshan5-Abu Dhabi. 2012 - 2012.
Yokogawa centum VP Fundamental for operation Yokogawa
vendor. Musafah-Abu Dhabi. 14/10/12 - 18/10/12.
Centrifugal compressor familiarization. Ebara
vendor. Habshan5-Abu Dhabi. 29/9/12 - 30/9/12.
Centrifugal compressor operation. Ebara
vendor. Habshan5-Abu Dhabi. 1/10/12 - 2/10/12.
Steam turbine operation. Ebara
vendor. Habshan5-Abu Dhabi. 3/10/12 – 4/10/12.
Steam condensate recovery.
C.Engineering. Habshan5-Abu Dhabi. 30/8/12.
Gas drying by TEG dehydration.
C.Engineering. Habshan5-Abu Dhabi. 29/8/12.
Lean Gas Treatment (Acid Gas Removal).
C.Engineering. Habshan5-Abu Dhabi. 2/8/12.
Rich Gas Treatment (Acid Gas Removal).
C.Engineering. Habshan5-Abu Dhabi. 1/8/12.
Inlet separation & Condensate stabilization.
C.Engineering. Habshan5-Abu Dhabi. 31/7/12.
Overall process facility for habshan5 plant.
C.Engineering. Habshan5-Abu Dhabi. 28/7/12 – 29/7/12.
HSE
C.Engineering. Habshan5-Abu Dhabi. 20/7/12 – 23/7/12.
TRAINING CERTIFICATES
Certificate of training – Mafi Trench.
Certificate of training – CCC.
Certificate of achievement - Otlorf, Habshan-Abu Dhabi, 2012.
Certificate of training – Yokogawa, Abu Dhabi, 18/10/12.
Certificate of achievement – Elliot Group-Ebara Corporation. 30/09/12.
Certificate of achievement – Elliot Group-Ebara Corporation. 5/10/12.
Certificate of achievement – Elliot Group-Ebara Corporation. 2/10/12.
Certificate of Attendance – C.Engineering 30/8/12.
Certificate of Attendance – C.Engineering 29/8/12.
Certificate of Attendance – C.Engineering 2/8/12.
Certificate of Attendance – C.Engineering 1/8/12.
Certificate of Attendance – C.Engineering 31/7/12.
Certificate of Attendance – C.Engineering 29/7/12.
Certificate of Attendance – C.Engineering 23/7/12.
HONORS AND AWARDS
4. Gasco-Habshan5 plant division, 2013. HSE Award for overall Best Performance of the
Year.
Gasco- Habshan5 plant division, April 2014 HSE Award for Man of the month
Gasco- Habshan5 plant division, June 2015 recovered more than 99% Propane (C3) and
89% Ethane (C2) from natural gas without expander.
Gasco- Habshan5 plant division, July 2015 Gasco Energy Award (Lean Amine Units
Operation Optimization).
KNOWLEDGE.
Distribution control system operation.
Ortlof suplemental rectification process.
Oil and gas exploration/production.
TEMA OIL REFINERY, GHANA-TEMA16/01/2006 –15/04/2012
Position: Senior production operator
Plant: RFCC
Unit:
Reactor and Fractionation unit,Gas Concentration unit,Merox/LPG Extraction
unit,Amine and Sour Water Treatment Unit.
Specific Duties:
Performs routine checks on process equipment and recommend solutions to any
anomalies.
Ensures good housekeeping.
Provides on-the-job training to students on attachment and acts as mentor for skill
development.
Carry out commissioning activities on RFCC plant according to lay down SOP.
Supervise chemical handling and its preparations.
Responsible for lockout and tag out procedures and issues work permit.
Preparing work area and equipment for maintenance work to start.
Supervisor and control injection rates.
Start-up and shut down of the unit.
Wet gas compressor start up shut down procedure.
Nitrogen pressure swinging absorber operations.
Solving the wet gas compressor vacuum loss problem.
Wet gas compressor ejector change over procedure.
Supervisor caustic preparation and transfer.
General starts -up shut down.
Disulphide oil transfer process.
INDUSTRIAL ATTACHMENT
Company: Intravenous infusion LTD.
Department: Engineering and production.
Period: March, 2003.
5. NATIONAL SERVICE
Institution: Afiduase junior high, Koforidua.
Position: Science tutor.
Period: 11/2004 – 08/2005
EDUCATION
Institution: Kumasi
Polytechnic, Ghana.
Qualification: Higher
national diploma (HND).
Discipline: Chemical
Engineering.
Institution: Kwame
Nkrumah University of Science and Technology.
Qualification: B.Sc.
(completion June.2015 & Certification December.2015).
Discipline Chemical
Engineering.
REFRENCE:
Name:
Ishak ismael Kissimo.
Position:
Training Supervisor.
Department:
Operation and training.
Contact:
ishak.kissom@gasco.ae
Name:
Haider Mohammed.
Position:
Shift Controller.
Department:
Operation.
Contact:
hmohamed@gasco.ae
Name: