Maintenance Supervisor Resume template
•Download as DOCX, PDF•
1 like•186 views
This resume is for a Maintenance Supervisor position at a meat processing facility. The supervisor will oversee the repair, maintenance, and operation of all equipment including ammonia systems, air and water filters, plumbing, and more. They will also train and evaluate maintenance employees, ensure production schedules are met, manage the computerized maintenance system, coordinate work to minimize downtime, and recommend capital improvements.
Report
Share
Report
Share
Recommended
Planning for Substation Maintenance and Reliability
This document discusses planning for substation maintenance and reliability. It outlines key steps in the planning process including developing a robust maintenance plan, gathering data from inspections and tests, creating a detailed work scope, coordination between the owner and contractor during the proposal, pre-outage planning and outage stages, and reviewing test results after the outage. The goal is to plan maintenance properly to ensure safety, reliability and regulatory compliance while minimizing downtime.
Operation and maintanance
This document defines operator maintenance and its importance. It discusses the different types of start-up for a thermal power plant, including cold, warm, hot, and very hot start-up. It also outlines some of the limitations and terms used in cold start-up procedures, such as turbine pre-warming. Finally, it briefly discusses the different types of maintenance, including preventive, corrective, and shutdown maintenance.
Plannedmaintenance
The document discusses different types of planned maintenance including preventive, corrective, predictive, and condition-based maintenance. It provides details on the objectives, elements, and steps involved in preventive maintenance. The key steps in preventive maintenance include analyzing the maintenance system, reviewing systems, prioritizing maintenance, training staff, and implementing the maintenance plan. Predictive maintenance allows maintenance to be performed just before failure based on inspections and diagnoses. It reduces unplanned downtime but requires investment in condition monitoring equipment and skills.
Planned maintenance scheduling overview
An overview presentation of the basic functions of SAP EAM Planned Maintenance scheduling using Maintenance Plans, Maintenance Strategies & Maintenance Scheduling
Maintenance module 1 ppt number 2
This document discusses key aspects of maintenance engineering including productivity, quality, reliability, and maintainability (PQRM). It explains that the right maintenance policy is required to avoid over or under maintenance. Good maintenance practices can increase equipment lifespan. PQRM are important for industry profitability. Productivity measures economic efficiency and output. Quality ensures products and processes meet standards. Reliability focuses on consistent performance over time. Maintainability refers to the ease of maintaining equipment. Quality circles in maintenance help solve work-related problems.
How to select the right control valves
When selecting control valves, it’s advisable to be sure to evaluate how the valve’s features match the application’s requirements in terms of connectivity for remote monitoring, stable flow control, versatility, and ability to handle a range of flows. Click here to know more http://valvulasfevisa.com/
Lec1 maintenance definition
1) Maintenance is defined as actions intended to retain or restore an item to a state in which it can perform its required function.
2) There are different types of maintenance including preventive maintenance, which aims to reduce failures before they occur; corrective maintenance, which repairs items after failure; and run-to-failure maintenance, which only repairs items after breakdown.
3) Attitudes toward maintenance have changed over time from seeing it as only a cost to recognizing its role in production, quality, safety, and the environment. Modern companies rely on well-organized maintenance programs for success.
Maintenance module 1 ppt number 1
This document discusses maintenance engineering. It defines maintenance as processes that keep equipment functioning normally to deliver expected performance without breakdowns. Maintenance aims to reduce business risks and maximize asset life at optimal cost. It involves basic functions like repairing, overhauling, and inspecting equipment, as well as composite functions like protecting facilities, reducing downtime, and analyzing repetitive failures. Maintenance objectives center around maintaining high equipment efficiency, minimizing deterioration costs, and helping management with replacement decisions. Responsibilities include caring for equipment availability and maintainability, identifying chronic problems, and implementing effective preventative programs. Benefits of maintenance include lower costs, extended asset life, reduced risks, and improved safety.
Recommended
Planning for Substation Maintenance and Reliability
This document discusses planning for substation maintenance and reliability. It outlines key steps in the planning process including developing a robust maintenance plan, gathering data from inspections and tests, creating a detailed work scope, coordination between the owner and contractor during the proposal, pre-outage planning and outage stages, and reviewing test results after the outage. The goal is to plan maintenance properly to ensure safety, reliability and regulatory compliance while minimizing downtime.
Operation and maintanance
This document defines operator maintenance and its importance. It discusses the different types of start-up for a thermal power plant, including cold, warm, hot, and very hot start-up. It also outlines some of the limitations and terms used in cold start-up procedures, such as turbine pre-warming. Finally, it briefly discusses the different types of maintenance, including preventive, corrective, and shutdown maintenance.
Plannedmaintenance
The document discusses different types of planned maintenance including preventive, corrective, predictive, and condition-based maintenance. It provides details on the objectives, elements, and steps involved in preventive maintenance. The key steps in preventive maintenance include analyzing the maintenance system, reviewing systems, prioritizing maintenance, training staff, and implementing the maintenance plan. Predictive maintenance allows maintenance to be performed just before failure based on inspections and diagnoses. It reduces unplanned downtime but requires investment in condition monitoring equipment and skills.
Planned maintenance scheduling overview
An overview presentation of the basic functions of SAP EAM Planned Maintenance scheduling using Maintenance Plans, Maintenance Strategies & Maintenance Scheduling
Maintenance module 1 ppt number 2
This document discusses key aspects of maintenance engineering including productivity, quality, reliability, and maintainability (PQRM). It explains that the right maintenance policy is required to avoid over or under maintenance. Good maintenance practices can increase equipment lifespan. PQRM are important for industry profitability. Productivity measures economic efficiency and output. Quality ensures products and processes meet standards. Reliability focuses on consistent performance over time. Maintainability refers to the ease of maintaining equipment. Quality circles in maintenance help solve work-related problems.
How to select the right control valves
When selecting control valves, it’s advisable to be sure to evaluate how the valve’s features match the application’s requirements in terms of connectivity for remote monitoring, stable flow control, versatility, and ability to handle a range of flows. Click here to know more http://valvulasfevisa.com/
Lec1 maintenance definition
1) Maintenance is defined as actions intended to retain or restore an item to a state in which it can perform its required function.
2) There are different types of maintenance including preventive maintenance, which aims to reduce failures before they occur; corrective maintenance, which repairs items after failure; and run-to-failure maintenance, which only repairs items after breakdown.
3) Attitudes toward maintenance have changed over time from seeing it as only a cost to recognizing its role in production, quality, safety, and the environment. Modern companies rely on well-organized maintenance programs for success.
Maintenance module 1 ppt number 1
This document discusses maintenance engineering. It defines maintenance as processes that keep equipment functioning normally to deliver expected performance without breakdowns. Maintenance aims to reduce business risks and maximize asset life at optimal cost. It involves basic functions like repairing, overhauling, and inspecting equipment, as well as composite functions like protecting facilities, reducing downtime, and analyzing repetitive failures. Maintenance objectives center around maintaining high equipment efficiency, minimizing deterioration costs, and helping management with replacement decisions. Responsibilities include caring for equipment availability and maintainability, identifying chronic problems, and implementing effective preventative programs. Benefits of maintenance include lower costs, extended asset life, reduced risks, and improved safety.
Maintenance
This document discusses different types of maintenance strategies. It defines maintenance as activities carried out to keep equipment in optimal working condition at minimum cost. Breakdown maintenance involves repair only after failure, while preventive maintenance aims to reduce failures through scheduled inspections and repairs. Predictive maintenance uses equipment monitoring and statistical analysis to predict and prevent failures. The strategies discussed range from reactive breakdown repair to proactive preventive and predictive approaches aimed at improving equipment reliability and productivity.
Planned preventive maintenance report
This document discusses planned preventive maintenance techniques. It divides maintenance activities into cleaning (C), oiling (O), and tightening (T). It recommends scheduling preventive maintenance tasks on a regular weekly basis. Key aspects of preventive maintenance include using computerized systems to generate and schedule tasks, focusing on operational efficiency, performance, safety, and cost reduction. Total productive maintenance (TPM) aims for zero breakdowns or defects by making all staff responsible for equipment. It utilizes techniques like autonomous maintenance, predictive analysis, and categorizing parts by importance.
Curriculum Vitae
This document is a curriculum vitae for Ulfat Hussain, an instrumentation and control engineer from Pakistan. It summarizes his work experience as a senior instrumentation and control engineer at Chashma Power Plant-1 in Mianwali, Pakistan since 2004. It also lists his technical skills, which include designing and commissioning instrumentation and control systems, maintenance experience across various control systems, and academic qualifications including a postgraduate diploma in plant instrumentation engineering.
Pom
The document discusses different types of maintenance procedures. It defines maintenance as actions intended to retain or restore an item to perform its required function. Maintenance objectives include reducing breakdowns, optimizing resource utilization, and improving equipment lifespan. The different types of maintenance procedures covered are breakdown maintenance, preventive maintenance, corrective maintenance, design-out maintenance, opportunity maintenance, condition-based predictive maintenance, reliability centered maintenance, and total productive maintenance. The document provides advantages and examples for several of the maintenance types.
Planned Maintenance
This document discusses different types of planned maintenance including preventive, corrective, predictive, and condition-based maintenance. It provides details on the objectives, elements, and steps involved in preventive maintenance. The key steps in preventive maintenance include analyzing the maintenance system, reviewing systems, prioritizing maintenance, training staff, and implementing the maintenance plan. Predictive maintenance allows maintenance to be performed just before failure based on equipment monitoring rather than on a set schedule. Both preventive and predictive maintenance aim to reduce downtime but predictive maintenance more precisely targets maintenance needs.
Maintenance and maintenance
The document discusses maintenance objectives, terms, and preventive maintenance programs. It aims to rapidly restore equipment readiness through planned maintenance. Key terms are defined, including preventive, corrective, and predictive maintenance. Preventive maintenance aims to inspect, service, calibrate, test, and replace equipment to prevent failures. Steps to establish preventive maintenance programs include identifying areas and needs, assigning frequencies, preparing work orders, and scheduling. The overall goal is to enhance equipment life and minimize downtime.
Plant maintenance system
The plant maintenance module provides an integrated solution to support enterprise-wide maintenance needs. It includes products to manage all aspects of plant and equipment maintenance. The module provides technical and business reports to help reduce plant downtime and recognize weak points in the technical system. The major subsystems include preventive maintenance control, equipment tracking, component tracking, calibration tracking, and warranty claims tracking. Preventive maintenance control allows planning, scheduling, and monitoring of equipment lubrication, replacement, and safety inspections. Equipment tracking monitors and protects assets, while component tracking identifies chronic repair problems. Calibration tracking supports ISO 9000 requirements and warranty claims tracking recovers reimbursements by managing warranty information.
Maintenance engineering- Unit- 3
This document discusses condition monitoring of machinery. It defines condition monitoring as monitoring parameters that can indicate developing failures. It discusses methods of condition monitoring including vibration monitoring, thermography analysis, and oil analysis. It also discusses establishing a condition monitoring program which involves determining the appropriate monitoring system, creating a list of machines to monitor, and selecting measurement locations and time intervals.
5546
The document outlines the responsibilities of an operations or control room operator role. Key responsibilities include:
1) Monitoring and controlling production facilities through a distributed control system to ensure safe and efficient operations. This includes starting up and shutting down equipment, maintaining process parameters, and isolating equipment for maintenance.
2) Keeping detailed records of operational data like pressure, temperature, and flow rates. Ensuring equipment is well maintained and requesting repairs when needed.
3) Coordinating with other departments to ensure smooth plant operations and shutdowns. Applying safety procedures for both operations and maintenance.
RCS Experience
This document summarizes the experience of an individual as a Maintenance Manager at an ammonia refrigeration facility. Some key responsibilities included managing all maintenance aspects related to operations and audits, leading process safety management corrections, developing and implementing budgets and capital projects, and providing 24/7 on-call support for troubleshooting, maintenance and repairs. The individual also created training programs, developed preventative maintenance plans, and was familiar with refrigeration equipment, controls, and material handling systems.
Maintenance & its types
The document discusses different types of maintenance including breakdown, preventive, predictive, corrective, and periodic maintenance. It describes maintenance as preserving equipment and infrastructure by repairing and replacing parts. Effective maintenance planning considers people, location, time, tools, and maintenance information. Key benefits include less downtime, fewer errors and repairs, and improved reliability and safety. Common causes of machinery breakdown include improper maintenance, worn parts, and operator errors. Preventive maintenance software helps coordinate maintenance tasks and store related data.
Basic Maintenance
This presentation is about the basic Maintenance, objectives, Types & its description, as well as equipment performance evaluation technique.
Types of Maintenance
The document discusses different types of maintenance including preventive maintenance like time-based, failure finding, condition-based, predictive, and risk-based maintenance as well as corrective maintenance like deferred and emergency maintenance. It defines each type of maintenance and provides examples of when each would be used. The document also discusses the differences between planned vs unplanned maintenance and proactive vs reactive maintenance cultures.
Optimization of preventive maintenance to reduce maintenance costs and increa...
Optimization of preventive maintenance to reduce maintenance costs and increase equipment availability
Maintenance plan
The document outlines a maintenance plan for a 227MW combined cycle power plant owned by Engro Powergen Qadirpur Ltd. It discusses the primary maintenance efforts, including for controls, combustion, turbines, generators and other balance of plant systems. It provides details on maintenance recommendations and inspections for gas turbine components like hot gas path parts, rotors, combustion parts, and describes major inspection processes. Regular maintenance following the manufacturer's guidelines is emphasized as key to maximizing gas turbine availability.
Ship maintenance pry20210312
1. Maintenance is important for keeping ships' machinery and equipment functioning properly. The International Safety Management Code specifies rules for maintenance management.
2. There are different types of maintenance procedures including planned, predictive, and unplanned maintenance. Planned maintenance involves scheduled, documented activities to reduce downtime. Predictive maintenance uses data analysis to detect potential issues before failures occur.
3. Condition-based maintenance monitors machinery regularly using sensors to assess condition and perform maintenance as needed. Reliability-centered maintenance determines strategies based on reliability analysis including failure modes. Unplanned maintenance occurs when equipment fails unexpectedly without a maintenance strategy in place.
Industrial Maintenance (Full Notes)
Hello Everyone!
This is the best ppt on 'Industrial Maintenance' that you can ever find. I tried to include all the topics related to the maintenance of industry. These notes will also be helpful from university exam point of view. Go through the whole ppt and leave a feedback in the comment box. Learn and Enjoy!
Thank You!
Types of maintenance, maintenance in plant ,maintenance type
There are four main types of maintenance: breakdown, preventive, predictive, and corrective. Preventive maintenance includes periodic and predictive maintenance. Periodic maintenance is time-based while predictive maintenance is condition-based. Condition monitoring is part of predictive maintenance and involves determining equipment condition while in operation. The different types have advantages like increased equipment life and disadvantages like being labor intensive. Aircraft maintenance includes A, B, C, and D checks performed at increasing intervals. Nondestructive testing is important for aircraft maintenance to inspect for defects without damaging equipment.
Plant maintenance
The document outlines a 7-step planned maintenance process that includes evaluating current equipment failures, restoring deteriorated equipment, establishing maintenance procedures, improving inspections, increasing efficiency, executing preventative maintenance, and replicating processes. It also lists benefits such as maintaining quality, increasing uptime and production, and reducing costs through improving reliability, maintainability, and predictive maintenance.
Maintenance management
Maintenance management involves keeping physical plant and equipment in good operating condition to minimize downtime and costs. The objectives of maintenance management are to minimize loss of productive time, repair time and costs, and total maintenance costs while maximizing quality, equipment uptime, and safety. Effective maintenance management includes preventive, predictive, routine, and planned maintenance approaches across civil, mechanical, and electrical systems. Proper control of maintenance involves authorization, scheduling, budgeting, and equipment records. Key considerations for maintenance include determining appropriate staffing and outsourcing levels as well as leveraging computer systems. High quality, reliable equipment can improve productivity if maintenance is considered early in the procurement process.
Presentación1 ignacio piñatsss
Ignacio sale corriendo al patio de recreo después de comer su colación. Juega al fútbol y otros juegos como la pinta o pacos contra ladrones con sus amigos. También usa su teléfono para jugar videojuegos. Tiene un grupo fijo de amigos con los que juega todos los días y conversan sobre diversos temas como fútbol o el álbum del mundial.
Best Industrial Training in Android
Arcadian Technocrats an Application Development company situated at Mohali working from last three year in IT World. Working on different android application and first company to take android application development on Cloud.
Key focus area of Company to developed Android Application on Cloud and provide best, cheapest and Fast Responding Solution to the Market.
For More details click on http://www.arcadianlearning.com/application-web-development.html
More Related Content
What's hot
Maintenance
This document discusses different types of maintenance strategies. It defines maintenance as activities carried out to keep equipment in optimal working condition at minimum cost. Breakdown maintenance involves repair only after failure, while preventive maintenance aims to reduce failures through scheduled inspections and repairs. Predictive maintenance uses equipment monitoring and statistical analysis to predict and prevent failures. The strategies discussed range from reactive breakdown repair to proactive preventive and predictive approaches aimed at improving equipment reliability and productivity.
Planned preventive maintenance report
This document discusses planned preventive maintenance techniques. It divides maintenance activities into cleaning (C), oiling (O), and tightening (T). It recommends scheduling preventive maintenance tasks on a regular weekly basis. Key aspects of preventive maintenance include using computerized systems to generate and schedule tasks, focusing on operational efficiency, performance, safety, and cost reduction. Total productive maintenance (TPM) aims for zero breakdowns or defects by making all staff responsible for equipment. It utilizes techniques like autonomous maintenance, predictive analysis, and categorizing parts by importance.
Curriculum Vitae
This document is a curriculum vitae for Ulfat Hussain, an instrumentation and control engineer from Pakistan. It summarizes his work experience as a senior instrumentation and control engineer at Chashma Power Plant-1 in Mianwali, Pakistan since 2004. It also lists his technical skills, which include designing and commissioning instrumentation and control systems, maintenance experience across various control systems, and academic qualifications including a postgraduate diploma in plant instrumentation engineering.
Pom
The document discusses different types of maintenance procedures. It defines maintenance as actions intended to retain or restore an item to perform its required function. Maintenance objectives include reducing breakdowns, optimizing resource utilization, and improving equipment lifespan. The different types of maintenance procedures covered are breakdown maintenance, preventive maintenance, corrective maintenance, design-out maintenance, opportunity maintenance, condition-based predictive maintenance, reliability centered maintenance, and total productive maintenance. The document provides advantages and examples for several of the maintenance types.
Planned Maintenance
This document discusses different types of planned maintenance including preventive, corrective, predictive, and condition-based maintenance. It provides details on the objectives, elements, and steps involved in preventive maintenance. The key steps in preventive maintenance include analyzing the maintenance system, reviewing systems, prioritizing maintenance, training staff, and implementing the maintenance plan. Predictive maintenance allows maintenance to be performed just before failure based on equipment monitoring rather than on a set schedule. Both preventive and predictive maintenance aim to reduce downtime but predictive maintenance more precisely targets maintenance needs.
Maintenance and maintenance
The document discusses maintenance objectives, terms, and preventive maintenance programs. It aims to rapidly restore equipment readiness through planned maintenance. Key terms are defined, including preventive, corrective, and predictive maintenance. Preventive maintenance aims to inspect, service, calibrate, test, and replace equipment to prevent failures. Steps to establish preventive maintenance programs include identifying areas and needs, assigning frequencies, preparing work orders, and scheduling. The overall goal is to enhance equipment life and minimize downtime.
Plant maintenance system
The plant maintenance module provides an integrated solution to support enterprise-wide maintenance needs. It includes products to manage all aspects of plant and equipment maintenance. The module provides technical and business reports to help reduce plant downtime and recognize weak points in the technical system. The major subsystems include preventive maintenance control, equipment tracking, component tracking, calibration tracking, and warranty claims tracking. Preventive maintenance control allows planning, scheduling, and monitoring of equipment lubrication, replacement, and safety inspections. Equipment tracking monitors and protects assets, while component tracking identifies chronic repair problems. Calibration tracking supports ISO 9000 requirements and warranty claims tracking recovers reimbursements by managing warranty information.
Maintenance engineering- Unit- 3
This document discusses condition monitoring of machinery. It defines condition monitoring as monitoring parameters that can indicate developing failures. It discusses methods of condition monitoring including vibration monitoring, thermography analysis, and oil analysis. It also discusses establishing a condition monitoring program which involves determining the appropriate monitoring system, creating a list of machines to monitor, and selecting measurement locations and time intervals.
5546
The document outlines the responsibilities of an operations or control room operator role. Key responsibilities include:
1) Monitoring and controlling production facilities through a distributed control system to ensure safe and efficient operations. This includes starting up and shutting down equipment, maintaining process parameters, and isolating equipment for maintenance.
2) Keeping detailed records of operational data like pressure, temperature, and flow rates. Ensuring equipment is well maintained and requesting repairs when needed.
3) Coordinating with other departments to ensure smooth plant operations and shutdowns. Applying safety procedures for both operations and maintenance.
RCS Experience
This document summarizes the experience of an individual as a Maintenance Manager at an ammonia refrigeration facility. Some key responsibilities included managing all maintenance aspects related to operations and audits, leading process safety management corrections, developing and implementing budgets and capital projects, and providing 24/7 on-call support for troubleshooting, maintenance and repairs. The individual also created training programs, developed preventative maintenance plans, and was familiar with refrigeration equipment, controls, and material handling systems.
Maintenance & its types
The document discusses different types of maintenance including breakdown, preventive, predictive, corrective, and periodic maintenance. It describes maintenance as preserving equipment and infrastructure by repairing and replacing parts. Effective maintenance planning considers people, location, time, tools, and maintenance information. Key benefits include less downtime, fewer errors and repairs, and improved reliability and safety. Common causes of machinery breakdown include improper maintenance, worn parts, and operator errors. Preventive maintenance software helps coordinate maintenance tasks and store related data.
Basic Maintenance
This presentation is about the basic Maintenance, objectives, Types & its description, as well as equipment performance evaluation technique.
Types of Maintenance
The document discusses different types of maintenance including preventive maintenance like time-based, failure finding, condition-based, predictive, and risk-based maintenance as well as corrective maintenance like deferred and emergency maintenance. It defines each type of maintenance and provides examples of when each would be used. The document also discusses the differences between planned vs unplanned maintenance and proactive vs reactive maintenance cultures.
Optimization of preventive maintenance to reduce maintenance costs and increa...
Optimization of preventive maintenance to reduce maintenance costs and increase equipment availability
Maintenance plan
The document outlines a maintenance plan for a 227MW combined cycle power plant owned by Engro Powergen Qadirpur Ltd. It discusses the primary maintenance efforts, including for controls, combustion, turbines, generators and other balance of plant systems. It provides details on maintenance recommendations and inspections for gas turbine components like hot gas path parts, rotors, combustion parts, and describes major inspection processes. Regular maintenance following the manufacturer's guidelines is emphasized as key to maximizing gas turbine availability.
Ship maintenance pry20210312
1. Maintenance is important for keeping ships' machinery and equipment functioning properly. The International Safety Management Code specifies rules for maintenance management.
2. There are different types of maintenance procedures including planned, predictive, and unplanned maintenance. Planned maintenance involves scheduled, documented activities to reduce downtime. Predictive maintenance uses data analysis to detect potential issues before failures occur.
3. Condition-based maintenance monitors machinery regularly using sensors to assess condition and perform maintenance as needed. Reliability-centered maintenance determines strategies based on reliability analysis including failure modes. Unplanned maintenance occurs when equipment fails unexpectedly without a maintenance strategy in place.
Industrial Maintenance (Full Notes)
Hello Everyone!
This is the best ppt on 'Industrial Maintenance' that you can ever find. I tried to include all the topics related to the maintenance of industry. These notes will also be helpful from university exam point of view. Go through the whole ppt and leave a feedback in the comment box. Learn and Enjoy!
Thank You!
Types of maintenance, maintenance in plant ,maintenance type
There are four main types of maintenance: breakdown, preventive, predictive, and corrective. Preventive maintenance includes periodic and predictive maintenance. Periodic maintenance is time-based while predictive maintenance is condition-based. Condition monitoring is part of predictive maintenance and involves determining equipment condition while in operation. The different types have advantages like increased equipment life and disadvantages like being labor intensive. Aircraft maintenance includes A, B, C, and D checks performed at increasing intervals. Nondestructive testing is important for aircraft maintenance to inspect for defects without damaging equipment.
Plant maintenance
The document outlines a 7-step planned maintenance process that includes evaluating current equipment failures, restoring deteriorated equipment, establishing maintenance procedures, improving inspections, increasing efficiency, executing preventative maintenance, and replicating processes. It also lists benefits such as maintaining quality, increasing uptime and production, and reducing costs through improving reliability, maintainability, and predictive maintenance.
Maintenance management
Maintenance management involves keeping physical plant and equipment in good operating condition to minimize downtime and costs. The objectives of maintenance management are to minimize loss of productive time, repair time and costs, and total maintenance costs while maximizing quality, equipment uptime, and safety. Effective maintenance management includes preventive, predictive, routine, and planned maintenance approaches across civil, mechanical, and electrical systems. Proper control of maintenance involves authorization, scheduling, budgeting, and equipment records. Key considerations for maintenance include determining appropriate staffing and outsourcing levels as well as leveraging computer systems. High quality, reliable equipment can improve productivity if maintenance is considered early in the procurement process.
What's hot (20)
Optimization of preventive maintenance to reduce maintenance costs and increa...
Optimization of preventive maintenance to reduce maintenance costs and increa...
Types of maintenance, maintenance in plant ,maintenance type
Types of maintenance, maintenance in plant ,maintenance type
Viewers also liked
Presentación1 ignacio piñatsss
Ignacio sale corriendo al patio de recreo después de comer su colación. Juega al fútbol y otros juegos como la pinta o pacos contra ladrones con sus amigos. También usa su teléfono para jugar videojuegos. Tiene un grupo fijo de amigos con los que juega todos los días y conversan sobre diversos temas como fútbol o el álbum del mundial.
Best Industrial Training in Android
Arcadian Technocrats an Application Development company situated at Mohali working from last three year in IT World. Working on different android application and first company to take android application development on Cloud.
Key focus area of Company to developed Android Application on Cloud and provide best, cheapest and Fast Responding Solution to the Market.
For More details click on http://www.arcadianlearning.com/application-web-development.html
Presentacion prezi repi
La Unión Europea ha acordado un paquete de sanciones contra Rusia por su invasión de Ucrania. Las sanciones incluyen restricciones a las importaciones de productos rusos de alta tecnología y a las exportaciones de bienes de lujo a Rusia. Además, se congelarán los activos de varios oligarcas rusos y se prohibirá el acceso de los bancos rusos a los mercados financieros de la UE.
jhg
Haiku Deck is a presentation tool that allows users to create Haiku-style slideshows. The tool encourages users to get started making their own Haiku Deck presentations, which can be shared on SlideShare. In just 3 sentences, it promotes creating Haiku Deck presentations and publishing them to SlideShare.
Doodey stand easy 3D cards
This set contains two unique stand-easy Christmas cards with an unusual shape, including a 3D decoupage sheet, two die-cut cards, two luxury lasered cardlayers, and two easels to display the cards.
Career assignment
The document discusses becoming an electrician as a career. It notes that the labour market outlook indicates electrician jobs are expected to increase by 19,500 over the next seven years. Electricians fall under NOC code 7241. The work requires good vision, hand-eye coordination, attention to detail, physical fitness, and safety consciousness. Emotional intelligence is also important, including self-awareness, managing emotions, and staying calm under pressure. The document suggests becoming an electrician offers challenging and interesting work, opportunities to learn skills for life, and potential future options like starting one's own business.
BigML Fall 2015 Release
BigML is the first Machine Learning service offering Association Discovery on the cloud! With these slides you can learn how to use Association Discovery and other new features such as Partial Dependence Plots, Logistic Regression, Correlations, Statistical Tests and Flatline Editor.
Trabajo redes edward
Este documento proporciona una introducción a las redes de comunicación. Explica brevemente la historia de las redes desde los primeros intentos de transmisión de información en el siglo XIX hasta el desarrollo de Internet. Luego describe los tipos de redes, cómo se clasifican y sus ventajas para los usuarios.
Analytics for large-scale time series and event data
Time series and event data form the basis for real-time insights about the performance of businesses such as ecommerce, the IoT, and web services, but gaining these insights involves designing a learning system that scales to millions and billions of data streams. In this presentation, Ira Cohen, Anodot cofounder and chief data scientist, outlines such a system that performs real-time machine learning and analytics on streams at massive scale.
Proyecto sobre los sistemas del cuerpo humano
El cuerpo posee varios sistemas que cumplen con una función específica para lograr conservar la vida.
Google Web Toolkit 1.5 Presentation Web Creative Common
Présentation GWT en ligne
Support de formation GWT en version 1.5. Vous pouvez le consulter en ligne. Ce support est proposé sous licence Creative Commons.
Viewers also liked (14)
Teaching ML with scikit-learn at Telecom ParisTech
Teaching ML with scikit-learn at Telecom ParisTech
Analytics for large-scale time series and event data
Analytics for large-scale time series and event data
Google Web Toolkit 1.5 Presentation Web Creative Common
Google Web Toolkit 1.5 Presentation Web Creative Common
Similar to Maintenance Supervisor Resume template
Zaheer-CV- 2015
Zaheeruddin Ahmed has over 38 years of experience in power plant and desalination plant operations, maintenance, project management, and commissioning. He is seeking a senior level position utilizing his expertise in combined cycle power plants, desalination processes, and leadership. His career highlights include roles as Operations Manager, Shift Manager, and project coordinator for major facilities in Abu Dhabi, Ghana, and Pakistan.
michaels resume.pdf
Michael Duncan has over 30 years of experience overseeing natural gas processing plant operations including cryogenic processing, H2S amine treatment, dehydration units, and NGL storage. He is skilled in maintaining safe operations, equipment inspections, process monitoring and adjustments, troubleshooting issues, and training new employees. Duncan seeks a leadership role where he can utilize his extensive experience and skills in communication, safety, and team development.
Ali_CV
Ali Al Mansour is seeking a position as an Instrument Maintenance Technician. He has over 3 years of experience in instrument calibration, loop checking, and troubleshooting of various process control instruments including pressure, temperature, flow, and level instruments. He is proficient in Microsoft Office applications and has strong technical skills in instrumentation.
Sankar resume
I am pothuraju sankar, i have 4.10 years experience in petrochemical and refinery field operations and commissioning and pre commissioning experience.
LARRY CV
Hilario C. Dicag is applying for a position as a Senior Rotating Equipment Technician. He has over 22 years of experience as a mechanical technician working on rotating equipment like compressors, pumps, and turbines in oil, gas, and power industries. His resume lists his employment history including his most recent role as a Senior Rotating Equipment Technician for Saudi Aramco Total Refining and Petrochemical Company where he performed maintenance, inspections, and repairs on rotating equipment. He is seeking a similar position where he can utilize his extensive experience maintaining critical rotating equipment.
new resume2016
Angel Schwep has over 15 years of experience installing, maintaining, and repairing HVAC systems. He has worked for several companies servicing both commercial and residential HVAC equipment. He is proficient in installing, terminating, and commissioning various HVAC components including air handlers, chillers, cooling towers, and building automation control systems. Schwep has extensive skills in diagnosing and repairing all types of HVAC/R systems.
Mechanical Maintenance Supervisor CV
This document contains the resume of Vaithiyanathan Pethiyan. It summarizes his objective of seeking a mechanical maintenance supervisor position, and lists his core competencies including over 14 years of experience in oil, gas, and power plants involving maintenance, commissioning, and troubleshooting of various rotating and static equipment. It also provides details of his work experience in locations like Oman, Iraq, Qatar, India, and Kuwait with companies like BP and RasGas.
resume-4-1.docx (1)
Thomas Lally has over 20 years of experience as a power plant operator and boiler plant operator. He holds numerous licenses including a Maryland First Grade Stationary Engineers License. He has a Bachelor's Degree in Environmental Engineering Technology from Temple University. Currently he works as a Power Plant Operator for NAES Corporation, where his responsibilities include operating and maintaining steam production processes, software systems, and ensuring environmental compliance.
World Class Manufacturing:Plant Start Up and Commissioning Procedure
The document provides an overview of plant commissioning and start-up procedures. It discusses the commissioning process which includes preparation and planning, mechanical completion and integrity checking, pre-commissioning and operational testing, start-up and initial operation, performance and acceptance testing, and post-commissioning. It then goes into more detail on specific aspects of the commissioning process such as developing start-up procedures, commissioning utilities, pressure testing, cleaning and flushing, and pre-commissioning operational testing.
updated_ashishmalhotra
Ashish Malhotra is seeking a career in an organization where he can grow with the company. He has 6 years of experience in control and instrumentation installation, commissioning, and maintenance. His experience includes commissioning control and instrumentation systems for the balance of plant areas like water treatment, fire fighting, emission monitoring, and cooling systems of multiple thermal power plants totaling 600MW capacity. He has a bachelor's degree in electronics and communication engineering and is proficient in SAP, safety training, and instrumentation calibration.
Ankur Sood-Instrument engineer
Ankur Sood has over 9 years of experience as an instrumentation and control engineer. He is seeking a position as a project engineer, commissioning engineer, instrumentation maintenance engineer, planner, or instrument supervisor. He has experience working for Reliance Industries Limited on projects including large petrochemical plants, power plants, air separation plants, and product transfer systems. He has expertise in commissioning, maintenance, and project management of instrumentation and control systems.
Ankur Sood-Instrument engineer
Ankur Sood has over 9 years of experience as an instrumentation and control engineer. He is looking for positions as a project engineer, commissioning engineer, instrumentation maintenance engineer, planner, or instrument supervisor. He has experience working on large projects for Reliance Industries, including planning, commissioning, maintenance, and safety compliance. He is proficient in various control systems, field instruments, analyzers, and safety standards.
QNFS_Rajasekhar Murugaiyan REV 1
Rajasekar Murugaiyan has over 19 years of experience in maintenance for oil, gas, power and other industrial facilities. He currently works as a Superintendent for Qatar Shell GTL, where he supervises maintenance activities and shutdowns. Previously he held roles with increasing responsibility in maintenance management and supervision. He has extensive experience planning and executing maintenance and overseeing teams that maintain mechanical, electrical and instrumentation equipment.
EngineerResume
This document provides a summary of Marvin Fernandez Balani's career objective, qualifications, work experience, and skills. His objective is to obtain a position as a Protection Engineer focusing on fire and electrical systems or automation engineering. He has over 15 years of experience in operations, maintenance, and project roles in industries such as oil and gas, utilities, and construction. His technical skills include SCADA, PLC, electrical systems, and fire protection. He is seeking a role that utilizes his engineering degree and experience.
Resume2016
An experienced facilities engineer and water/wastewater operator seeking a new position. He has over 15 years of experience in building operations, water treatment, and wastewater management across various industries. The document outlines his work history, education, certifications, and skills which demonstrate his strong background in engineering, operations, and maintenance.
Mechanical Technician
Dear Sir,
I'm Subramanian Narayanasamy from saudi arabia working in NES Global Ltd Client SADARA PETROCHEMICAL COMPANY and I have 14 years experiences in oil & gas company Maintenances field.
MY CONTRACT END OF THIS MONTH JANUARY-31-2018 PLEASE ANY VACANCES IN OUR CONCERN
PLEASE CONSIDER MY CV .
CV - Senior Mechancial Technician
Mohammad Shadab Faisal is a Senior Mechanical Technician with over 9 years of experience in operation and maintenance of water and wastewater treatment plants, pumping stations, and desalination plants. He holds a Diploma in Mechanical Engineering and has worked for ASHGHAL in Qatar and JUSCO and SWCC in India and Saudi Arabia respectively. His responsibilities included preventative and corrective maintenance of rotating equipment like pumps, compressors, and static equipment like valves, as well as troubleshooting, overhauling, and repairs. He is proficient in mechanical skills, safety practices, and computer software.
vivek curricullum vitae
Vivek Dayanand Deushekar has over 10 years of experience in mechanical maintenance and supervision roles. He has worked as a mechanical supervisor at ANABEEB PIPELINE & SERVICES CO LTD and CHOWGULE & CO PVT LTD, where his responsibilities included supervising maintenance activities, overseeing repairs, and managing personnel. He holds a Bachelor's degree in Mechanical Engineering and is proficient in English, Hindi, Marathi, and Konkani.
Iftekhar-CURRICULUM VITAE
Mohammed Iftekhar has over 7 years of experience in process operation and maintenance for water treatment plants and chemical industries. He currently works as a Chemical Engineer for Addoha Company Ltd in Dammam, Saudi Arabia, where he is responsible for operating, maintaining, and monitoring the effluent treatment plant and water demineralization facility. Previously, he worked for SRSL and RSGBL in various process engineering and maintenance roles in India. He holds a Bachelor's Degree in Chemical Engineering and is proficient in software like SAP and Microsoft Office.
Mech manager
The document is a bio-data for Nabakishor Sethi, who is applying for the position of Post-Mechanical Maintenance Manager. It outlines his academic and technical qualifications which include an ITI, diploma in mechanical engineering, and B.E. in mechanical engineering. It details his 20 years of work experience, most recently as Utility In-Charge at Al Safi Dairy, the largest dairy farm in the world. It provides a job profile describing his experience maintaining and operating HVAC, boiler, air compressor, and water treatment plant systems and equipment.
Similar to Maintenance Supervisor Resume template (20)
World Class Manufacturing:Plant Start Up and Commissioning Procedure
World Class Manufacturing:Plant Start Up and Commissioning Procedure
Maintenance Supervisor Resume template
- 1. Maintenance SupervisorResume template • Supervise the operation,repairandmaintenanceof all equipmentinvolvedwithameatprocessing facility,toinclude all ammoniaequipment,compressedair,dehumidificationequipment,steam, cooling systems,airandwater filters,plumbing,heatexchangers,watertreatment,heaters,level controlsand watersystems. • Performtroubleshootingandrepairelectrical systems,electricalcontrols,electricmotors,pumps, gearboxes,blowers/fans. • Resolve equipmentmalfunctionsbyevaluatingperformancebreakdowns,identifyingthe rootcause, safelyrepairingthe equipment,andtakingactionstopreventrecurringfailures. • Select,train,coachmaintenance employeesandevaluate performance againstperformance requirements. • Assignemployeestodailytasksof maintainingthe facilityandproductionequipmentviaworkorders and follow-upasrequired. • Assuresall productionschedulesare metandresolved,assignedemployeestodailytasksof maintainingthe facility/productionworkandpreventative maintenance are completedinatimely manner.Checkcritical plantequipmentdaily. • Manage the utilizationandoperationof the CMMS systemtoinclude MRO/Inventoryfunctions. • Coordinate workwithproductiontominimize outages.Mustanticipate plantprioritiesassituations arise. • Make recommendationsforcapital improvementsandchangestoenhance productionand maintainabilityof the facilityandequipment.Maintainawarenessof employee’sconcerns. • Promote goodhousekeepinginthe maintenance areasandgeneral facility.Ensure all assignedwork and preventative maintenance tasksare completedinatimelymanner. • Must be able to documentall appropriate recordsandsubmittalstomeetrequirementssetforthby OSHA,EPA,USDA and plantmanagement. • All otherdutiesasassigned.