Downloaded 201 times
More Related Content
Similar to Comfort devices
Comfort devices
- 1. R.Jaya Bsc nursing Lecture Gangacollege of nursing
- 2. Comfort isconcerned with rest, with exercise, with the relation of one part of the body to another, with the bed and the whole environment. Comfort is a phase of every procedure as it is an aspect of the total care of the patient.
- 3. Comfort devicesare invented articles which would add to comfort of patient when used in appropriate manner. These devices relieve the discomfort and help in maintaining correct posture. Various comfort devices are used for giving comfort to the patient,
- 4. PILLOWS BACKREST HAND ROLLS FOOT REST KNEE REST SAND BAGS AIR AND WATER MATTRESS
- 5. RUBBER ANDCOTTON RINGS BED CRADLES BED BLOCK AIR CUSHION CARDIAC TABLE SIDE RAILS WEDGE/ABDUCTOR PILLOWS TRAPEZE BAR
- 6. Pillows areused to give comfortable position to the patient. These are most commonly used to support various body parts.
- 7. Purpose: To maintainproper body alignment To support body part in good alignment Help to reduce pressure It can be folded, rolled or tucked firmly against the body to maintain position It is used to support head, neck, arms, legs and part of the back adds to the physical comfort
- 8. Back restis a mechanical device which provides a suitable support and rest for the back of the patient in sitting position
- 9. Purpose: To supportback To facilitate easy breathing It is given especially for heart patients and asthma patients Used in postoperative period
- 10. Hand rollsare made of cloth that rolled into a cylinder’ about 4-5 inches long and 2-3 inches in diameter and stuffed firmly
- 11. Purpose: Theseused to keep the fingers from being held in a tight fist leading to flexion contracture in patients who are unable to move hands due to paralysis, injury or disease. Thigh rolls are made by folding a sheet to the desired length of 2-3 feet and then rolled into a tight cylinder. Thigh rolls are used to support hips and thighs preventing them from outward rotation and keeping the feet in good alignment in case of paralysis, fracture of femur of hip surgery.
- 12. Foot restsare the mechanical device used to give rest to feet. Sands bags or foot board may be substituted.
- 13. Purpose: Ithelps to maintain the normal position of feet It is used for the comfort To prevent foot drop
- 15. It maybe substituted by pillow To relives the pressure on the abdomen and on tendon beneath the knee Many doctors should not allow the knee pillows because fear of thrombus formation and pulmonary embolism Change the position frequently
- 16. Sand bagsare canvas, rubber or plastic bags filled with sand and are 1, 5 and 10 lbs in weight. Sand bags are used to immobilize a part.
- 17. Purpose: Torelieve discomfort Used to support the body part Used to immobilize the body part Used to support as in fractures bones To prevent foot drop or wrist drop
- 18. Air andwater mattresses are used for very thin or obese patients and for those who are prone to get pressure sores. The principles is that pressure exerted by the body, will be distributed equally in all directions. Air and water mattresses are plastic mattresses with two sets of chambers. To use them place the mattress on the bed and fill air or water in the compartment. Cover the mattress with light bottom clothes.
- 20. Purpose: Toimprove circulation To provide comfort To prevent pressure sores Used in very thin or very obese patients Used in chronic bed ridden patients Caution: Avoid punctures in the mattress with needles, pins or other sharp objects
- 21. Air ringsare made of rubber. The air rings is inflated about half full tested for leakage, covered and the placed under the patient’s hip in such a way that the value is on side and not in contact with body. Cotton rings are made wrapped with bandage. These are placed under the bony prominences such as heels and fastened in place if necessary.
- 22. Purpose Usedto lift the hip from bed to prevent bed sores It helps to prevent direct pressure on bony prominence It improves the circulation
- 23. Bed cradlesvary widely in size and in material. Bed cradles are of wooden, metal or electronic. The bed cradles support and take off the weight of the bedding. Bed cradle are semi-circular in shape made of wood or metal or entirely made of metal tubing or slats.
- 24. Purpose: Usedto prevent the top cloth is coming in contact with the patients especially in burns patients To apply heat in case of dying plaster casts Electronic bed cradles are used to supply the desired warm to the case of shock
- 25. Bed blocksare made up of wood size; it may be high or low. These are placed under the foot of bed for various reasons.
- 26. Purpose: Toprevent shock To arrest hemorrhage To retain enema After spinal anesthesia After tonsillectomy To provide traction To position in postural drainage
- 27. Air cushionsare round in shape and made up of rubber. These can be inflated with air. These are used to take off the weight of the body. Air cushion should not be applied directly in contact with skin. They should have a cover.
- 28. Purpose: Torelieve pressure on certain parts of the body It provides relaxation as it yields to shift off body weight and it relieves pressure on certain parts of the body Uses: air cushion vehicles work by creating a large force of those points to the ground. This lifts the vehicle off the ground letting it ride on a cushion of air.
- 29. A tableis in the hospital for patient’s use during hospitalization. It is used to maximize safety of both patients and staff. Improve patient’s surrounding by modifying the current cardiac table to one that can be kept and folded. Bed table placed in front with a pillow on it, patient can lean forward and take rest Table without pillow is used for writing and meals Used for patients with cardiac conditions and asthma Position should be changed to relieve fatigue
- 30. Purpose Patientcan rest over the table with the help of pillow Helps to take meals and in writing
- 32. Side railsare the bars positioned along the sides of the length of the bed Purpose: Ensure the patients safety and are useful for increasing mobility Provide assistance in rolling from side to side /sitting up in bed
- 34. It isa triangular shaped pillow made up of heavy foam Purpose: It is used to maintain the legs in abduction following hip replacement surgery
- 35. An overheadtrapeze is a triangle-shaped metal bar. It hangs from a metal frame, which is attached to the headboard and footboard of the bed. A triangular metal apparatus above a bed, used to help the patient move and support weight during transfer or position change. Trapeze bar is suspended from an overhead frame that extends from the foot to head of bed
- 36. Patient cangrasp the bar to raise the trunk off the bed surface or to move up in bed.
- 37. Nurse identifycomfort needs of patients and family members Nurses design interventions to meet identified needs Intervening variables are considered when designing interventions When interventions are delivered in a caring manner and are effective, and when enhanced comfort is attained, interventions are called “comfort measures” Patients and nurse agree on desirable and realistic health seeking behaviors
- 39. If enhancedcomfort is achieved, patients and family members are more likely to engage in health-seeking behaviors these further enhance comfort When patients and family members are given comfort care and engage in health-seeking behaviors, they are more satisfied with health care and have better health-related outcomes. When patients, families, and nurses are satisfied with health care in an institution, public acknowledgement about that institution’s contributions to health care will help the institution remain viable and flourish.