This document summarizes the design of the secondary systems for the North Sydney Zone Substation upgrade project by Ausgrid, which implemented IEC 61850 communication. Key aspects of the design included separating 'A' and 'B' protection systems onto independent ethernet networks, using multivendor relays and intelligent electronic devices (IEDs), and applying consistent logical design rules. Relays were configured to directly report signals and trip targets to improve information available for operational decisions. The challenges of implementing interoperability between devices from different vendors within this framework are also discussed.
AgileSwitch manufacturers SiC MOSFET Gate Drivers for leading SiC module manufacturers in the industry - Wolfspeed, Semikron, Rohm. Using patented technology AgileSwitch has built a driver with fault monitoring the prevent catastrophic conditions damaging your modules.
Apec 2014 Presentation by Albert CharpentierAgileSwitch
Albert Charpentier, Chief Technology Officer at AgileSwitch LLC, spoke at the APEC 2014 and presented his paper on the topic “How A New Power Stack Communication System Improves IGBT Reliability and Shortens Development Time” under the IS3.1 High Power Industrial Session chaired by Dr. Krishna Shenai.
Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSW-2824P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-10020MT is a fully-managed Gigabit fiber switch usually designed for the industrial network. It features 8 10/100/1000BASE-T copper ports, 2 100/1000/2500BASE-X SFP ports and redundant power system in an IP30 rugged but compact-sized case that can be installed in any difficult environment without space limitation. Within such favorable enclosure, it provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-5227-6T Industrial Managed Ethernet Switch comes with an IP67-rated industrial case, 6-port 10/100/1000T, and static Layer 3 routing, providing a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets.
The IGS-5227-6T can be easily mounted on a DIN rail or wall taking up less space. It provides a quick, safe, cost-effective and high-performance network solution to IP security surveillance for small businesses and enterprises.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-1600T Industrial high-density 16-port 10/100/1000T Gigabit Ethernet Switch is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-1600T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
AgileSwitch manufacturers SiC MOSFET Gate Drivers for leading SiC module manufacturers in the industry - Wolfspeed, Semikron, Rohm. Using patented technology AgileSwitch has built a driver with fault monitoring the prevent catastrophic conditions damaging your modules.
Apec 2014 Presentation by Albert CharpentierAgileSwitch
Albert Charpentier, Chief Technology Officer at AgileSwitch LLC, spoke at the APEC 2014 and presented his paper on the topic “How A New Power Stack Communication System Improves IGBT Reliability and Shortens Development Time” under the IS3.1 High Power Industrial Session chaired by Dr. Krishna Shenai.
Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSW-2824P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-10020MT is a fully-managed Gigabit fiber switch usually designed for the industrial network. It features 8 10/100/1000BASE-T copper ports, 2 100/1000/2500BASE-X SFP ports and redundant power system in an IP30 rugged but compact-sized case that can be installed in any difficult environment without space limitation. Within such favorable enclosure, it provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-5227-6T Industrial Managed Ethernet Switch comes with an IP67-rated industrial case, 6-port 10/100/1000T, and static Layer 3 routing, providing a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets.
The IGS-5227-6T can be easily mounted on a DIN rail or wall taking up less space. It provides a quick, safe, cost-effective and high-performance network solution to IP security surveillance for small businesses and enterprises.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-1600T Industrial high-density 16-port 10/100/1000T Gigabit Ethernet Switch is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-1600T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
Fast evaluation, demonstration and development for Your microcontroller based sensor or detector design!
Quickly evaluate, demonstrateand develop intelligent sensor designs with Detect it! Built on a True Low Power RL78 MCU with fast wake-up and dedicated analog features, it includes 4 different sensor boards and full reference source code.
"Morphology of Modern Data Center Networks: Overview". Dinesh Dutt, Cumulus N...Yandex
Form follows function is a modern architectural principle that has been used to design and understand the workings of organisms and buildings. Computer networks are also an example of this principle. The classical networking topology (or form) inside an enterprise (and data center) has been the access-aggregation-core model that was designed to serve the needs of the applications then vogue in the enterprise. Enter the 21st century: companies like Google and Amazon, and applications based on cloud, big data and web 2.0 are redefining the fundamental morphology of data center networks.
This talk introduces the fundamental form of modern data center networking and discusses how form follows function in this brave new world. The talk will range from the application needs of the modern data center and how they redefine the network requirements to the most common topology in modern data centers to the protocols used and new technologies.
Quickly and easily test coax and telephone cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination all in a single, versatile kit.
Benefits and implementation of ingress/egress reduction. BarrIER® technology is an innovative solution for reducing ingress/egress that addresses the
complete in-home interconnect domain and solves the problem of maintaining adequate C/N
levels.
Lika Electronic September 2014 Newsletter in EnglishLika Electronic
Featured this month: SSI to Profibus IF55 gateway, designed to convert any Lika SSI serial encoder into a Profibus-DP slave http://www.lika.it/eng/prodotti.php?id_cat=264 . New analogue outputs (0-10V voltage and 4-20 current outputs) for SFP series cable-pulling encoders http://bit.do/Lika- Draw-Wire-Range .
The eRPP-FS from LayerZero Power Systems increases reliability and safety in two ways. The finger-safe eRPP-FS contains no exposed live parts.
Designed and manufactured in Aurora, Ohio, USA.
The LayerZero Power Systems Series 70: eRDP is a web-enabled Remote Distribution Panel. Designed to maximize operator safety, the eRDP contains no exposed live parts. Brochure contains product overview, product information, and technical specifications.
Durability, availability and performance reliability are the qualities that best describe the RUGGEDCOM RSG2100 / RSG2100P 32-port Ethernet switch – whether configured with 4 modular Gigabit uplink ports and 128-bit encryption or to support Power-over-Ethernet.
The Renesas YROTATE-IT-RX23T is a complete reference platform based on the 32-bit RX23T MCU, designed to drive any 3-phase Permanent Magnet Motor, with three Power Stages available to drive up to 5KW. The kit can handle up to 48VDC motors, and up to 5Apeak, and is delivered with an intuitive PC GUI to manage the motor speed, display the vector control parameters and provide access to an exhaustive list of parameters: motor intrinsic parameters, PI coefficients, etc. By default, the sensorless Field Oriented Control algorithm uses three shunts for current detection and runs at 16KHz PWM. The PC GUI features auto-tuning and enables self-calibration of Permanent Magnet Synchronous Motors. The complete material of the kits can be downloaded free of charge from: http://www.renesas.eu/motorcontrol
Multi-protocol industrial Ethernet solution, complete with multiple pre-qualified industrial Ethernet stacks including EtherCAT, Profinet, and EtherNet I/P, enabling both in-depth evaluation and fast prototype development.
Based on awarding-winning Renesas OFDM powerline modem technology, Connect it! is a comprehensive and easy-to-use platform for evaluating and developing scalable, robust, certified multi-protocol platforms supporting multiple frequency bands.
Duotech's F-16 Briefing During the 2015 F-16 TCG WWRLee Cloer
Brett Rogers, Vice President of Duotech Services, provides a presentation during the morning F-16 Briefings held at the 2015 F-16 TCG Worldwide Review. This briefing was held on the morning of September 14, 2015. If you missed this presentation, we recorded it and have included the full video at the link here > http://duotechservices.com/duotechs-briefing-f-16-tcg-wwr
CLASS 2016 - Palestra Paulo Antunes de Souza Jr.TI Safe
Palestra "Cyber Security para Sistemas de Automação de Energia - Como a Defesa em Profundidade Pode Aumentar a Segurança Cibernética em Instalações Críticas", realizada no dia 20/05/2016.
Fast evaluation, demonstration and development for Your microcontroller based sensor or detector design!
Quickly evaluate, demonstrateand develop intelligent sensor designs with Detect it! Built on a True Low Power RL78 MCU with fast wake-up and dedicated analog features, it includes 4 different sensor boards and full reference source code.
"Morphology of Modern Data Center Networks: Overview". Dinesh Dutt, Cumulus N...Yandex
Form follows function is a modern architectural principle that has been used to design and understand the workings of organisms and buildings. Computer networks are also an example of this principle. The classical networking topology (or form) inside an enterprise (and data center) has been the access-aggregation-core model that was designed to serve the needs of the applications then vogue in the enterprise. Enter the 21st century: companies like Google and Amazon, and applications based on cloud, big data and web 2.0 are redefining the fundamental morphology of data center networks.
This talk introduces the fundamental form of modern data center networking and discusses how form follows function in this brave new world. The talk will range from the application needs of the modern data center and how they redefine the network requirements to the most common topology in modern data centers to the protocols used and new technologies.
Quickly and easily test coax and telephone cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination all in a single, versatile kit.
Benefits and implementation of ingress/egress reduction. BarrIER® technology is an innovative solution for reducing ingress/egress that addresses the
complete in-home interconnect domain and solves the problem of maintaining adequate C/N
levels.
Lika Electronic September 2014 Newsletter in EnglishLika Electronic
Featured this month: SSI to Profibus IF55 gateway, designed to convert any Lika SSI serial encoder into a Profibus-DP slave http://www.lika.it/eng/prodotti.php?id_cat=264 . New analogue outputs (0-10V voltage and 4-20 current outputs) for SFP series cable-pulling encoders http://bit.do/Lika- Draw-Wire-Range .
The eRPP-FS from LayerZero Power Systems increases reliability and safety in two ways. The finger-safe eRPP-FS contains no exposed live parts.
Designed and manufactured in Aurora, Ohio, USA.
The LayerZero Power Systems Series 70: eRDP is a web-enabled Remote Distribution Panel. Designed to maximize operator safety, the eRDP contains no exposed live parts. Brochure contains product overview, product information, and technical specifications.
Durability, availability and performance reliability are the qualities that best describe the RUGGEDCOM RSG2100 / RSG2100P 32-port Ethernet switch – whether configured with 4 modular Gigabit uplink ports and 128-bit encryption or to support Power-over-Ethernet.
The Renesas YROTATE-IT-RX23T is a complete reference platform based on the 32-bit RX23T MCU, designed to drive any 3-phase Permanent Magnet Motor, with three Power Stages available to drive up to 5KW. The kit can handle up to 48VDC motors, and up to 5Apeak, and is delivered with an intuitive PC GUI to manage the motor speed, display the vector control parameters and provide access to an exhaustive list of parameters: motor intrinsic parameters, PI coefficients, etc. By default, the sensorless Field Oriented Control algorithm uses three shunts for current detection and runs at 16KHz PWM. The PC GUI features auto-tuning and enables self-calibration of Permanent Magnet Synchronous Motors. The complete material of the kits can be downloaded free of charge from: http://www.renesas.eu/motorcontrol
Multi-protocol industrial Ethernet solution, complete with multiple pre-qualified industrial Ethernet stacks including EtherCAT, Profinet, and EtherNet I/P, enabling both in-depth evaluation and fast prototype development.
Based on awarding-winning Renesas OFDM powerline modem technology, Connect it! is a comprehensive and easy-to-use platform for evaluating and developing scalable, robust, certified multi-protocol platforms supporting multiple frequency bands.
Duotech's F-16 Briefing During the 2015 F-16 TCG WWRLee Cloer
Brett Rogers, Vice President of Duotech Services, provides a presentation during the morning F-16 Briefings held at the 2015 F-16 TCG Worldwide Review. This briefing was held on the morning of September 14, 2015. If you missed this presentation, we recorded it and have included the full video at the link here > http://duotechservices.com/duotechs-briefing-f-16-tcg-wwr
CLASS 2016 - Palestra Paulo Antunes de Souza Jr.TI Safe
Palestra "Cyber Security para Sistemas de Automação de Energia - Como a Defesa em Profundidade Pode Aumentar a Segurança Cibernética em Instalações Críticas", realizada no dia 20/05/2016.
Distributech 2015 taking interoperability to the next levelSchneider Electric
Riel Substation is Manitoba Hydro’s newest DC Converter Station as well as a major 230/500kV transmission station. Riel covers approximately 40 hectares making it physically one of the largest
substations in North America. The project modifies the existing 500kV international transmission line running from Winnipeg, CA to Minnesota.
This paper presents the analysis of the technical issues encountered during project execution such as engineering design, multivendor integration, GOOSE implementation, network infrastructure and cyber security. It covers also the organizational issues such as customer involvement and standardization, among others, lessons learned and recommendations for future implementations.
This is one of the first complete protection and control automation solution using redundant IEC61850. The technology being implemented within Riel Station is not only one of the largest Digital Control Systems on the continent, but is one of the premier systems in the world today.
As a partner of the Riel initiative, Schneider Electric has completed the engineering, design and manufacturing of protection and control panels for the entire substation using state of the art technologies including but not limited to full redundant system, NERC CIP cyber security compliance, multivendor interoperability and reliability as a top priority with 6 independent fiber optic networks, redundant protections, HMI and networks.
The implemented design permits a cost effective solution using the Ethernet Redundant Networks to communicate with others devices and non-hardwire traditional solution. The protection scheme solution is based on IEC61850, providing the protection functions and logics inside the different relays to
share and capture information required protecting the electrical network and facilitating the monitoring from HMI. By the time this paper will be presented at DTECH 2015, the 230 kV portion of the project will have been commissioned and energized.
Redefining IoT with Innovation At Every Level - Prith Banerjee, Chief Technol...Schneider Electric
A sustainable future must become radically more efficient with the way we use energy. The Internet of Things (IoT) and the convergence of Operational Technology (OT) and Information Technology (IT) are enabling companies to deliver more innovation at every level, from connected products to edge control, from services to software, both on premise and in the cloud. Understanding the growth potential for infrastructure development and the related ecosystem is vital for societal, long-term investment.
The 7SR45 Argus Self Powered/Dual Powered Non-Directional Overcurrent and Earth Fault Relay is developed using the latest generation of hardware technology and is available in multiple variants depending on the Current Transformer (CT), binary input/binary output, power supply, and communication configuration.
Electric Control Valve Actuators for Industrial Process ApplicationsCTi Controltech
The Rotork CVA line of electric process control actuators offers a highly accurate and responsive method of automating control valves, without the complexity and cost of a pneumatic supply. With an increased focus on production costs and efficiency, accurate control of product through the pipeline is paramount. With resolution figures better than 0.1% and the ability to eliminate position overshoot, the Rotork CVA models help to maximize product quality and plant capacity.