VIP Call Girls Pune Kirti 8617697112 Independent Escort Service Pune
iControl: Substation SCADA
1. iControl
The Energy Control
The automation of the power grid requires the use of SCADA systems for the local control of each
facility as well as for the management of the entire network.
iControl SCADA system solves these problems by allowing not only the local control of a facility,
but also the management of facilities with thousands of devices and several simultaneous
communications protocols. iControl is specially designed for the energy sector. This SCADA
system is easy to use and configure, and allows to suit needs of any company, regardless of the
communication protocol, the type of RTU to connect to, or the format of the original data.
Product Highlights
Communication with key protocols Allows to switch between the Configuration and Runtime
(IEC60870-5-101, IEC60870-5-104, DNP3.0, Modbus) modes without disconnecting the system’s operation.
IEC61850 client Ability to work both in standalone format, for the local
Total configuration of the control panel, according to control of facilities, and in client / server format, for
customer requirements. the control of energy networks.
All files used are open file formats (XML, CSV, ...) Very easy to deploy and backup. Does not need
User customizable library of components installation procedure. Just copy to a PC and run it.
Integration with SQL databases Multilanguage support.
2. Local control of the electrical facilities
iControl is the solution for the local control of automated
substations and generation facilities, connecting directly to
the RTU, via serial channel or LAN.
This SCADA system can control any type of RTUs, regardless
of manufacturer, as it uses standard communication
protocols (IEC61850, IEC60870-5-101/104, DNP3.0, Modbus)
and system configuration files based on open formats
(XML, CSV, etc.) This will make easy to import information
to the RTU units.
In IEC61850 substations, iControl will act as data client
connected to the substation network, not only to the RTU,
but also to all the protection and measurement devices.
It will send them commands and set points, and receive
information regarding their status.
Technical Specifications
› Features
Control of up to 32,000 signals in any type of license › Data
Standalone or Client / Server architecture Configuration files in open formats (XML, CSV, txt, INI,..)
Control of up to 8000 RTUs Easy creation of RTU configurations and databases,
Compatible with any type of RTU and device, regardless importing macros/applications
of manufacturer Export data to standard formats such as CSV for later
processing of data
› Communications Automated backup processes
Implementation of most widespread protocols: SQL databases integration available
60870-5-101/104
61850 › Stand Alone
Single user SCADA system
3.0 serial Focused on both the control of electrical substations and
Support for any physical media: hydro generation plants, either working as a local SCADA
232 422/485 for the whole facility or working as a HMI for the control
of independent bays or positions.
3. Telecontrol of the Electrical Grid
In many cases, it is necessary either to control a part of the network independently from the corporate SCADA, or
to have an auxiliary Control Center in case of failure of the main Control Center. iControl is a low-cost software
which, in its client / server version, is designed for controlling facilities networks remotely.
Besides, the capability of working with floating clients allows operators to connect to the system from different
locations, no matter where they are or the distance to the facilities and the server.
› Client / Server
The iControl server will be connected both to the
Telecontrol network, from which will receive all data, and
to the Intranet of the company.
iControl clients will communicate to the server
through the company Intranet. The server will facilitate
information of all remote devices.
Customers represent floating licenses, not tied to an
specific computer, which facilitates access to information
from different places.
› System Requirements
800Mhz Pentium IV
XP SP3 or later operating system
No installation required
USB dongle protection
4. Smart Solutions
for Smart Grids
iRTU
Substation Automation
Telecontrol of Medium Voltage Networks
www.igrid-td.com
C/ Marie Curie, 8-14 Contact:
Parc Tecnològic Barcelona Nord sales@igrid-td.com
08042 – Barcelona sat-bcn@igrid-td.com
Catalunya – Spain