This document compares various audio file formats including RAW, MP3, AIFF, MPEG, WAV, ACT, and WMA. It discusses the characteristics of each format such as compression, file extensions, advantages like size and limitations like lack of compatibility. Key points covered include how MP3, MPEG, and WMA use lossy compression while WAV and AIFF are uncompressed, and the benefits and drawbacks of each in terms of quality, size, and features.
Codec stands for enCOder/DECoder or COmpressor/DECompressor. It is a software or hardware that compresses and decompresses audio and video data streams.
Codec stands for enCOder/DECoder or COmpressor/DECompressor. It is a software or hardware that compresses and decompresses audio and video data streams.
Market Research Report : Digital Broadcasting market in India 2012Netscribes, Inc.
For the complete report, get in touch with us at : info@netscribes.com
As India looks towards incorporating digitization framework in the broadcasting sector, conversion of analogue to digital spells evolution of a new trend in the Indian market. Though there has been some penetration of digital broadcasting media in India in the likes of DTH and digital cable, yet it was predominantly nominal. However, this is going to undergo some kind of a volte-face as the Indian sector is bracing itself for a conversion to digital from analogue transmission. Transition of the mass market from analog to digital forms a major challenge to the players as the Government mandates to digitize the entire cable network by the end of 2014. Newer modes of content delivery such as IPTV and mobile TV look at increasing their foothold as the sector holds itself up for rapid growth in this domain.
The report begins with an introduction section which throws some light on the segmentation of the digital broadcasting sector defining the key media vehicle that uses this technology in India. It is followed by global digital broadcasting sector along with its market size and growth. A brief take on the Indian digital sector follows next along with its market size and growth. The value chain analysis tells about the chief components that constitute the chain of transmission from the broadcaster to the end consumer. It then proceeds to a brief description of the revenue model that is prevalent in the sector. Though the primary modes of garnering revenue include revenues from subscription, lease rentals of logistical supports like set top boxes different media like IPTV or even digital radio might be having customized channels beyond the regular. This section gets concluded with a Porter’s Five Forces analysis for the market.
The report then narrows down to illustrate the different segments of media that requires digital broadcasting technology for its transmission. The report speaks about five distinct components that use digital content and are namely Digital Cable TV, DTH, IPTV, Mobile TV and Digital Radio. Each of the individual segments is dealt individually detailing its description as well as market size and growth. Individual segments are provided with the system framework of their transmission from the content provider to that of the end consumer. This section ends with a brief take on the broadcasting spectrum that is used in the sector.
A brief description of the drivers that helps the sector to prosper include emerging middle class and rising disposable income, increase in television and radio penetration, complete digitization of TV services and increase in sale of LCD and LED TVs. Though entertainment has become a quintessential input in our daily diet and TV penetration has increased manifold, products like digital TV or subscriptions like DTH have witnessed a separate class of consumers.
Codec stands for enCOder/DECoder or COmpressor/DECompressor. It is a software or hardware that compresses and decompresses audio and video data streams.
Codec stands for enCOder/DECoder or COmpressor/DECompressor. It is a software or hardware that compresses and decompresses audio and video data streams.
Market Research Report : Digital Broadcasting market in India 2012Netscribes, Inc.
For the complete report, get in touch with us at : info@netscribes.com
As India looks towards incorporating digitization framework in the broadcasting sector, conversion of analogue to digital spells evolution of a new trend in the Indian market. Though there has been some penetration of digital broadcasting media in India in the likes of DTH and digital cable, yet it was predominantly nominal. However, this is going to undergo some kind of a volte-face as the Indian sector is bracing itself for a conversion to digital from analogue transmission. Transition of the mass market from analog to digital forms a major challenge to the players as the Government mandates to digitize the entire cable network by the end of 2014. Newer modes of content delivery such as IPTV and mobile TV look at increasing their foothold as the sector holds itself up for rapid growth in this domain.
The report begins with an introduction section which throws some light on the segmentation of the digital broadcasting sector defining the key media vehicle that uses this technology in India. It is followed by global digital broadcasting sector along with its market size and growth. A brief take on the Indian digital sector follows next along with its market size and growth. The value chain analysis tells about the chief components that constitute the chain of transmission from the broadcaster to the end consumer. It then proceeds to a brief description of the revenue model that is prevalent in the sector. Though the primary modes of garnering revenue include revenues from subscription, lease rentals of logistical supports like set top boxes different media like IPTV or even digital radio might be having customized channels beyond the regular. This section gets concluded with a Porter’s Five Forces analysis for the market.
The report then narrows down to illustrate the different segments of media that requires digital broadcasting technology for its transmission. The report speaks about five distinct components that use digital content and are namely Digital Cable TV, DTH, IPTV, Mobile TV and Digital Radio. Each of the individual segments is dealt individually detailing its description as well as market size and growth. Individual segments are provided with the system framework of their transmission from the content provider to that of the end consumer. This section ends with a brief take on the broadcasting spectrum that is used in the sector.
A brief description of the drivers that helps the sector to prosper include emerging middle class and rising disposable income, increase in television and radio penetration, complete digitization of TV services and increase in sale of LCD and LED TVs. Though entertainment has become a quintessential input in our daily diet and TV penetration has increased manifold, products like digital TV or subscriptions like DTH have witnessed a separate class of consumers.
It's the Battle of the Century, and the front line is in our living room. Billions are at stake as Media giants, Tech titans and Internet innovators revolutionise the Future of TV.
A presentation about digital marketing regarding Search Engine Optimization, Pay Per Click, and Social Media Marketing.
The presentation includes the advantages and disadvantages of SEO, PPC and Social Media Marketing and a short strategy that you can use with each one of them.
L9-files fClick to edit Master title styleormat.pptxFahmiOlayah
أشعر أنه لن يغادر. سوف يؤذيني إذا رحل. ليس لأنه برشلونة. نحن لسنا بمستوى هذه الفرق العظيمة. ما نريده هو مواصلة التطور، إذا غادر سيؤذيني ذلك لأنه سوف ينخفض المستوى. لكن أعتقد أنه مستمر معنا.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
Chap62
1. Compare the advantages and limitations of various audio
files format.
2. In This Chapter, you’ll learn on:
The following file formats.
o RAW
o MP3
o AIFF
o MPEG
o WAV
o ACT
o WMA
The characteristics of these formats.
The advantages and limitations of these formats.
3. What is a “Raw” Audio?
It’s hard to talk about “Raw” because it’s not really
the name of a file format. Originally the term was
used within Photoshop for doing a desperation
import of a mystery file that contains no metadata
whatsoever, not even the most basic facts such as
file format, size, color mode, etc.
A newer (and basically unrelated) meaning of “raw”
— more formally called Camera Raw — has
become very common with the rise of digital
photography.
4. What is a “Raw” Audio?
Raw Audio is any recorded audio that is unedited
and unprocessed. The advantage of raw audio
means it can provide clients with audio exactly as it
was recorded. However when a file is defined as
“raw”, it also means that the file size can be too big
to be easily transferred.
5. MP3
MP3 is the name of a type of audio file extension and also the
name of the type of file for MPEG (Audio layer 3). Layer 3 is one of
three coding schemes (layer 1, layer 2 and layer 3) for the
compression of audio signals. Layer 3 uses perceptual audio
coding and psychoacoustic compression to remove all
superfluous information (more specifically, the redundant and
irrelevant parts of a sound signal. The stuff the human ear doesn't
hear). It also adds a MDCT (Modified Discrete Cosine Transform)
that implements a filter bank, increasing the frequency resolution
18 times higher than that of layer 2.
The result in real terms is layer 3 shrinks the original sound data from
a CD (with a bit rate of 1411.2 kilobits per one second of stereo
music) by a factor of 12 (down to 112-128kbps) without sacrificing
sound quality.
6. MP3
Because MP3 files are small, they can easily be transferred across
the Internet, which really is a plus point as compared to the other
audio formats. MP3 files are played on the computer via media
player software, such as Apple's iTunes and Microsoft's Windows
Media Player, as well as in countless iPods and other handheld
players. MP3 sound quality cannot fully match the original CD,
and true audiophiles complain bitterly, but millions of people
consider it "good enough" because they can pack thousands of
songs into a tiny pocket-sized player.
Converting a digital audio track from a music CD to the MP3
format (or other audio format) is called "ripping" or "importing,"
and this conversion function is built into iTunes, Windows Media
Player and other jukebox software. Stand-alone rippers are also
available.
7. MP3
While 128 Kbps (kilobits per second) is considered the norm for
MP3 files, MP3s can be ripped to bit rates from 8Kbps to 320 Kbps.
The higher the bit rate, the better the sound and the larger the file.
According to CNN, any artists, execs and labels in the music
industry have lashed out at the MP3 format due to the fact that it
doesn't offer much security and is, therefore, very easy to pirate.
Another potential disadvantage to MP3 format is that at lower
bitrates the MP3 format's quality has been known to suffer, while
WMA sounds much better at comparable low bitrates. Finally, MP3
files do not support 5.1 Surround Sound, which the WMA format
does support.
8. AIFF
Short for Audio Interchange File Format, a common format for
storing and transmitting sampled sound. The format was
developed by Apple Computer and is the standard audio format
for Macintosh computers. It is also used by Silicon Graphics
Incorporated (SGI).
AIFF files generally end with a .AIF or .IEF extension.
The AIFF format does not support data compression so AIFF files
tend to be large. However, there is another format called AIFF-
Compressed (AIFF-C or AIFC) that supports compression ratios as
high as 6:1.
9. AIFF
The extension for this file type is ".aif" when it is used on a PC. On
aMac, the file extension is not needed. A Mac file uses a Type and
Creatorresource to identify itself to the operating system and the
applicationsthat can open it.
An AIFF file contains the raw audio data, channel information
(monophonic orstereophonic), bit depth, sample rate, and application-
specific data areas. Theapplication-specific data areas let different
applications add informationto the file header that remains there even if
the file is opened andprocessed by another application.
10. MPEG
Moving Pictures Experts Group is an ISO/ITU standard for
compressing digital video. Pronounced "em-peg," it is the universal
standard for digital terrestrial, cable and satellite TV, DVDs and
digital video recorders (DVRs).
MPEG uses lossy compression within each frame similar to JPEG,
which means pixels from the original images are permanently
discarded. It also uses interframe coding, which further
compresses the data by encoding only the differences between
periodic frames (see interframe coding). MPEG performs the
actual compression using the discrete cosine transform (DCT)
method (see DCT).
11. MPEG
MPEG is an asymmetrical system. It takes longer to compress the
video than it does to decompress it in the DVD player, PC, set-top
box or digital TV set. As a result, in the early days, compression was
perfomed only in the studio. As chips advanced and became less
costly, they enabled digital video recorders, such as Tivos, to
convert analog TV to MPEG and record it on disk in real time (see
DVR).
12. The major MPEG standards include the following:
MPEG-1 (Video CDs) - Although MPEG-1 supports higher
resolutions, it is typically coded at 352x240 x 30fps (NTSC) or
352x288 x 25fps (PAL/SECAM). Full 704x480 and 704x576 frames
(BT.601) were scaled down for encoding and scaled up for
playback. MPEG-1 uses the YCbCr color space with 4:2:0
sampling, but did not provide a standard way of handling
interlaced video. Data rates were limited to 1.8 Mbps, but often
exceeded. See chroma subsampling.
MPEG-2 (DVD, Digital TV) - provides broadcast quality video with
resolutions up to 1920x1080. It supports a variety of audio/video
formats, including legacy TV, HDTV and five channel surround
sound. MPEG-2 uses the YCbCr color space with 4:2:0, 4:2:2 and
4:4:4 sampling and supports interlaced video. Data rates are from
1.5 to 60 Mbps. See chroma subsampling.
13. MPEG-4 (All Inclusive and Interactive)
MPEG-4 is an extremely comprehensive system for multimedia
representation and distribution. Based on a variation of Apple's
QuickTime file format, MPEG-4 offers a variety of compression
options, including low-bandwidth formats for transmitting to
wireless devices as well as high-bandwidth for studio processing.
See H.264.
MPEG-4 also incorporates AAC, which is a high-quality audio
encoder. MPEG-4 AAC is widely used as an audio-only format (see
AAC).
14. MPEG-4 (All Inclusive and Interactive)
A major feature of MPEG-4 is its ability to identify and deal with
separate audio and video objects in the frame, which allows
separate elements to be compressed more efficiently and dealt
with independently. User-controlled interactive sequences that
include audio, video, text, 2D and 3D objects and animations are
all part of the MPEG-4 framework. For more information, visit the
MPEG Industry Forum at www.mpegif.org.
15. MPEG-7 (Meta-Data)
MPEG-7 is about describing multimedia objects and has nothing
to do with compression. It provides a library of core description
tools and an XML-based Description Definition Language (DDL) for
extending the library with additional multimedia objects. Color,
texture, shape and motion are examples of characteristics
defined by MPEG-7.
MPEG-21 (Digital Rights Infrastructure)
MPEG-21 provides a comprehensive framework for storing,
searching, accessing and protecting the copyrights of multimedia
assets. It was designed to provide a standard for digital rights
management as well as interoperability. MPEG-21 uses the "Digital
Item" as a descriptor for all multimedia objects. Like MPEG-7, it
does not deal with compression methods.
16. MPEG-2 and MPEG-4 are international standards for compressing
video signals; they are widely used in digital television
broadcasting, DVD discs, and mobile videophony. Using these
standards, video can be compressed in an encoder before
transmission or storage, perhaps to 1/50 of the original size, and
then decompressed in a decoder for playback.
Like the JPEG (Joint Photographic Experts Group) standard for
compressing still images, the MPEG-2 and MPEG-4 standards
exploit redundancies in the original signal and limitations of
human vision to discard unnecessary information. Depending on
the compressed bitrate selected, the decoded image can be
imperceptibly different from the original or badly flawed with
visible artifacts.
17. MPEG-2 and MPEG-4 offer several advantages over proprietary
codecs. The standards process allows careful, open, and
objective tests of competitive ideas and approaches to find the
best mix of efficiency, latency, and implementation complexity for
a codec.
WAV
The format for storing sound in files developed jointly by Microsoft
and IBM. Support for WAV files was built into Windows 95 making it
the de facto standard for sound on PCs. WAV sound files end with
a.wav extension and can be played by nearly all Windows
applications that support sound.
18. This is a high-quality audio file type generally used for applications
that require high quality, such as CDs. WAV files are
uncompressed, and therefore take up some disk space, unlike
MP3s or AACs, which are compressed.
Because WAV files are uncompressed, they contain more data
and produce better, more subtle, and more detailed sounds.
A WAV file generally needs 10MB for every 1 minute of audio,
whereas an MP3 needs about 1MB for every 1 minute.
19. ACT
ACT is a lossy ADPCM 8 kbit/s compressed audio format recorded
by most Chinese MP3 and MP4 players with a recording function,
and voice recorders. However, many models of recorder that use
the ACT format do so only for their lowest-quality recording setting;
if the quality setting is increased then a different format such as
WAV is used instead (albeit at the expense of using up recorder
memory more quickly).
There are different versions of ACT; files produced by later devices
cannot as of June 2009 be read by any free standard audio
player and converter software, only by the supplied MP3 utilities.
20. WMA
Short for Windows Media Audio, a file format developed by
Microsoft for encoding digital audio files similar to MP3 though can
compress files at a higher rate than MP3. WMA files, which use the
".wma" file extension, can be of any size compressed to match
many different connection speeds, or bandwidths. Known
originally as MSAudio, this proprietary format competes with the
MP3 and AAC methods. WMA encodes rapidly and is known to be
especially effective at low bit rates.
21. WMA
One of the largest advantages to the WMA format is the format's
support of DRM, or Digital Rights Management. This is an anti-
piracy procedure that allows for much more security to surround a
given music file. Although it doesn't completely make it pirate-
proof, it makes pirating in this method much less common; MP3
offers no DRM and is therefore much easier to steal.
One of the largest disadvantages associated with the WMA
format is the lack of support from third party devices such as MP3
players. Although some support WMA files, such as Microsoft's own
Zune, many do not. The Apple iPod does not support WMA and,
as the market's dominant MP3 player, compatibility can be a
huge issue if you own one. Also, many media players for the
computer do not play DRM protected WMA files, making this
format's biggest advantage also a disadvantage, in some cases.
22. WMA
When it comes to WMA and MP3, both sacrifice sound quality to
save space. With WMA Lossless this sacrifice is not made but the
sound file is still condensed down to about half of its original size.
The file extension for WMA Lossless is still .WMA. This format is less
popular than other lossless audio formats, such as FLAC.