CEMSCREED HM(F) SPECIAL is a single component thixotropic, dual shrinkage-compensated, fibre reinforced formulation for structural concrete repairs. It can be applied vertically or overhead by low-pressure wet-spraying or hand troweling. CEMSCREED HM(F) SPECIAL is reinforced with special alkali resistant polypropylene fibres for exceptional resistance to cracking. Repairing with CEMSCREED HM(F) SPECIAL does not require any polymer based bonding agent on concrete surface. Specially designed formulation curtails the setting time and offers high early strength to the required patch.

1. CEMSCREED HM(F) SPECIAL
SINGLE COMPONENT,
FIBRE REINFORCED, THIXOTROPIC REPAIR MORTAR

2. Benefits
 Rapid strength gain to facilitate early strengthening.
 Does not contain any corrosive chemicals.
 One component only addition of water at site.
 No additional bonding agent required on concrete.
 Impermeable to aggressive elements. i.e chemicals, acids, etc.
 Thixotropic nature saves material.

3. Uses
CEMSCREED HM(F) SPECIAL is useful for repairing structural elements
subjected to repetitive loading such as beams and columns. Also used for
repairing industrial structures as well. This is an ideal product for the
repairing jobs during shutdown period. Its rapid strength gaining nature
gives early strength to the patch so that it can be brought in operation
immediately.

4. Description
CEMSCREED HM(F) SPECIAL is a single component thixotropic, dual
shrinkage-compensated, fibre reinforced formulation for structural concrete
repairs. It can be applied vertically or overhead by low-pressure wet-
spraying or hand troweling. CEMSCREED HM(F) SPECIAL is reinforced
with special alkali resistant polypropylene fibres for exceptional resistance
to cracking. Repairing with CEMSCREED HM(F) SPECIAL does not
require any polymer based bonding agent on concrete surface. Specially
designed formulation curtails the setting time and offers high early strength
to the required patch.

5. Properties
Color : Cement Grey
W/P ratio (by weight) : 0.16
Fresh wet density : 1800 kg/m³
Compressive strength
(ASTM C109) : 150 kg/cm² @ 1 day
: 250 kg/cm² @ 3 days
: 350 kg/cm² @ 7 days
: 450 kg/cm2 @ 28 days

6. Packing & Coverage
CEMSCREED HM(F) SPECIAL is available in 25kg bags. A 25kg bag of
CEMSCREED HM(F) SPECIAL when mixed with 4 litres water will yield
approximately 12.8 litres. Approximately four bags of 25kg are needed
per 1 m² area at 50mm thick application.

7. Packing & Coverage
CEMSCREED HM(F) SPECIAL is available in 25kg bags. A 25kg bag of
CEMSCREED HM(F) SPECIAL when mixed with 4 litres water will yield
approximately 12.8 litres. Approximately four bags of 25kg are needed
per 1 m² area at 50mm thick application.