CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.

1. CEMSCREED FAST REPAIR
CEMENTITIOUS, FAST REPAIR MORTAR
FOR CONCRETE AND PLASTER

2. Benefits
 Thick mortar (up to 50 mm thickness) for concrete and plaster
repair.
 Excellent bond strength.
 Compensates for shrinkage in the plastic stage
 Economical and easy to apply.
 Pre-packed factory controlled to overcome site-batched variations
 Rapid strength gain to facilitate early reinforcement
 High ultimate strength

3. Benefits
 Does not contains any corrosive chemicals
 Minimum disruption to traffic
 Ensure high tensile strength
 No curing is required.
 Quick repair with long lasting life.
 Excellent adhesion : Does not crack
 Durable & tough surface
 Resistant to wear and weather.

4. Uses
CEMSCREED FAST REPAIR is used for repairing on horizontal & vertical
surfaces.
Standard Compliance
CEMSCREED FAST REPAIR complies to BS 1881 Part-121 and ASTM C
157-93.

5. Description
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of
concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially
designed to provide a very fast set repair in concrete floors and pavements and is
particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR
is supplied as a ready-to-use, blend of dry powders which requires only the site
addition of water to produce a mortar consistency, non - shrink repair micro
concrete. The material is based on Portland cement, graded aggregates, fillers and
additives which impart controlled expansion characteristics in the plastic state while
minimizing water demand.

6. Properties
Minimum application temperature : 6ºC
Maximum application temperature : 30ºC
Open time / workability @ 30ºC : 30 minutes
Open to foot traffic : 4 hrs.
Open to light traffic : 18 hrs.
Water/powder ratio : 0.14 for mortar consistency
0.18 for flowable consistency
Compressive Strength (at 30 ºC) : 1 day - 35(N/mm²)
3 days - 45(N/mm²)
28 days - 55(N/mm²)

7. Packing & Coverage
CEMSCREED FAST REPAIR is available in 25 kg plastic bag. 25 kg
yields 13.5 ltr. with a coverage will be 1.8 kg/mm/m²