FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel applied, four component Methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
2. Benefits
High strength.
Very good chemical resistance.
Excellent adhesion.
Fast curing, even at low temperatures.
Impact and abrasion resistant.
Frost resistant and impervious to water.
Excellent mechanical properties.
Permanent repair to spalled & damaged concretes.
3. Uses
FAIRSCREED FLOORPATCH is used for repairing spalled or damaged
concrete, pre-cast concrete beams, chemical bunds, floor repairs.
4. Description
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel
applied, four component Methacrylate resin mortar, designed for rapid and
permanent repairs to concrete and masonry surfaces.
5. Properties
Colour : Light Grey (other available on requirest)
Density : 2,010 Kg/m²
Pot Life : 20 minutes at 30ºC
Hard Dry : 1 hour at 30ºC
Full Cure : 2 hours at 30 ºC
Compressive Strength : 40 N/cm²
Taber Abrasion Resistance : 45 Mg weight loss (CS wheels ; 1 kg loads ; 1,000
cycles)
Adhesion To Concrete : 3.7 N/mm² (Concrete failure)
Temperature Range
During Application : -20ºC to + 40ºC
In Service : -40ºC to + 60ºC
6. Packing & Coverage
FAIRCREED FLOORPATCH is supplied in 10 Kg pack. A 10 Kg pack
yields 5 litres of mortar, sufficient for 0.5 m² @ 10mm thick.
7. Packing & Coverage
FAIRCREED FLOORPATCH is supplied in 10 Kg pack. A 10 Kg pack
yields 5 litres of mortar, sufficient for 0.5 m² @ 10mm thick.