Industrial Services and Consultancy
•
0 likes•212 views
This document summarizes concrete waterproofing products from TAMMS that use crystallization. It describes three main products - TAMMS "HEY'DI ADMIX –K” powder added during concrete mixing, TAMMS "HEY'DI" K-11 brush applied coating, and TAMMS SPEED PLUG for fast concrete repairs. The crystallization process makes concrete permanently waterproof without needing additional coatings. Key advantages are that the crystals become part of the concrete and withstand temperature and pH variations while increasing strength.
Report
Share
Report
Share
![Prakash Somji (Col. Retd.), Director www.iscpsconsulting.com [email_address] Date: 1 st June , 2009 © 2009 Industrial Services and Consultancy. All rights reserved.](https://image.slidesharecdn.com/cusersuserdesktopiscpswebsite-090601091730-phpapp01/85/Industrial-Services-and-Consultancy-1-320.jpg)
![WHAT WE DO ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Cemscreed fast repair
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
Plum concrete (major project).pdf
this is the pdf of project on plum concrete which is used in civil engineering. the presentation is also uploaded of this topic on my profile. i hope liked by our engineers.
Plum concrete presentation
This is the presentation about the Plum concrete which is used under water to make a reservoir. This presentation is related to the Civil Engineering. The visual effect of the presentation can be seen after downloading it.
Cement grouting for cracks in concrete and masonry
Cement grouting can be used to fill wide cracks in concrete structures and masonry substructures. It is effective for sealing cracks but will not structurally bond cracked sections. Cement grout mixtures use ordinary Portland cement, sand, water, and may include admixtures. The water-cement ratio should be 0.4 to 0.5, with lower ratios for cracks over 0.5mm wide. Grouting equipment includes an air compressor, grout injecting machine, pressure mixer chamber, hoses, drilling equipment, and nozzles for injecting grout at 2 to 4 kg/cm2 of pressure.
Cement based building_materials_icr_aug2020
Cite this paper: J D Bapat, Kalpana Karthikeyan, "Cement Based Building Materials", Indian Cement Review, August 2020, pp 48-51
The work on the following cement-based building materials has been covered: dry mix mortar plaster (DMM), cement-based fly ash bricks, AAC blocks and micro-concrete for concrete repair work.
Plum concrete
This document provides specifications for plum concrete and plum masonry for a project at Hindustan Petroleum Corporation Limited's Mumbai Refinery. It specifies that the proportion of plums used should not exceed 50% of the total volume, and the stones should be between 200-300mm in size with a minimum crushing strength of 100kg/sqcm. The stones must be hard, durable, and tough. Cement concrete with a 1:4:8 ratio is to be used to fill the interstices between plums. Plums are to be laid in layers using cement concrete as mortar. Scaffolding is required, and weep holes using HDPE pipes must be provided.
Hpmc for-construction
Hydroxypropyl methyl cellulose (HPMC) is a natural polymer used as an additive in building materials for its properties of water retention, dispersion, and workability. It enhances properties like plasticity, adhesion, water resistance, and reduces cracking in cement, plaster, tile adhesives, drywall compounds, grouts, and other construction applications. HPMC comes as a white powder or granules and is soluble in water and some organic solvents. It is stable across a wide pH range and temperature, making it suitable for various construction uses.
Building and construction materials india
CEMENTATION is a leading conglomerate in India that manufactures, processes, exports building and construction materials like cement, minerals, chemicals, and provides civil construction services. It operates transparently from its headquarters in Gujarat, prioritizing innovation, customer satisfaction, and teamwork. CEMENTATION supplies materials like fly ash, GGBFS, and construction aggregates made from sand, gravel and crushed rock to be used in concrete and construction projects.
Recommended
Cemscreed fast repair
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
Plum concrete (major project).pdf
this is the pdf of project on plum concrete which is used in civil engineering. the presentation is also uploaded of this topic on my profile. i hope liked by our engineers.
Plum concrete presentation
This is the presentation about the Plum concrete which is used under water to make a reservoir. This presentation is related to the Civil Engineering. The visual effect of the presentation can be seen after downloading it.
Cement grouting for cracks in concrete and masonry
Cement grouting can be used to fill wide cracks in concrete structures and masonry substructures. It is effective for sealing cracks but will not structurally bond cracked sections. Cement grout mixtures use ordinary Portland cement, sand, water, and may include admixtures. The water-cement ratio should be 0.4 to 0.5, with lower ratios for cracks over 0.5mm wide. Grouting equipment includes an air compressor, grout injecting machine, pressure mixer chamber, hoses, drilling equipment, and nozzles for injecting grout at 2 to 4 kg/cm2 of pressure.
Cement based building_materials_icr_aug2020
Cite this paper: J D Bapat, Kalpana Karthikeyan, "Cement Based Building Materials", Indian Cement Review, August 2020, pp 48-51
The work on the following cement-based building materials has been covered: dry mix mortar plaster (DMM), cement-based fly ash bricks, AAC blocks and micro-concrete for concrete repair work.
Plum concrete
This document provides specifications for plum concrete and plum masonry for a project at Hindustan Petroleum Corporation Limited's Mumbai Refinery. It specifies that the proportion of plums used should not exceed 50% of the total volume, and the stones should be between 200-300mm in size with a minimum crushing strength of 100kg/sqcm. The stones must be hard, durable, and tough. Cement concrete with a 1:4:8 ratio is to be used to fill the interstices between plums. Plums are to be laid in layers using cement concrete as mortar. Scaffolding is required, and weep holes using HDPE pipes must be provided.
Hpmc for-construction
Hydroxypropyl methyl cellulose (HPMC) is a natural polymer used as an additive in building materials for its properties of water retention, dispersion, and workability. It enhances properties like plasticity, adhesion, water resistance, and reduces cracking in cement, plaster, tile adhesives, drywall compounds, grouts, and other construction applications. HPMC comes as a white powder or granules and is soluble in water and some organic solvents. It is stable across a wide pH range and temperature, making it suitable for various construction uses.
Building and construction materials india
CEMENTATION is a leading conglomerate in India that manufactures, processes, exports building and construction materials like cement, minerals, chemicals, and provides civil construction services. It operates transparently from its headquarters in Gujarat, prioritizing innovation, customer satisfaction, and teamwork. CEMENTATION supplies materials like fly ash, GGBFS, and construction aggregates made from sand, gravel and crushed rock to be used in concrete and construction projects.
Cement Australia - General Purpose Cement Data Sheet
General Purpose Cement is a versatile building material that complies with Australian standards for cement. It can be used in a wide range of construction applications including concrete slabs, structural elements, pipes, and more. GP cement provides consistency and works well with various admixtures and supplementary materials. Users should follow standards for mixing, curing, and testing to achieve appropriate strength and performance for their project needs.
Foamed cement
Foamed cement is created by injecting gas, usually nitrogen, into a cement slurry along with foaming agents and stabilizers. This creates a stable, lightweight cement with small, discrete bubbles that do not coalesce. Foamed cement can have densities ranging from 4 to 18 pounds per gallon, making it suitable for situations requiring lower hydrostatic pressure. It has advantages over conventional cement such as better strength, ductility, insulation properties, and ability to withstand mechanical stresses. While foamed cement jobs require more complex equipment and precision, it can improve zonal isolation in challenging well conditions.
Topic 1
Here are the steps to solve this nominal mix design problem based on mass:
1) Given: Cement mass = 150 kg
Mix ratio = 1:2:4
Densities:
Cement = 1440 kg/m3
Fine aggregate = 1640 kg/m3
Coarse aggregate = 1390 kg/m3
2) Calculate cement volume:
Cement mass / Cement density = Volume
150 kg / 1440 kg/m3 = 0.104 m3
3) Calculate fine aggregate volume based on mix ratio:
Cement volume x Fine aggregate ratio = Fine aggregate volume
0.104 m3 x 2 = 0.208 m3
mortar, concrete, bitumen, paints
The document discusses various construction materials including mortar, concrete, bitumen, and paints. It provides details on the composition and uses of different types of mortar such as lime mortar, cement mortar, and lime-cement mortar. It also discusses the main types of concrete including reinforced cement concrete. The document defines bitumen as a semi-solid hydrocarbon product derived from crude oil and lists its uses. Finally, it provides a basic definition of paint and some common uses such as artwork, decoration, surface protection, and warnings.
Mortors
The document discusses different types of mortars used in construction. It defines mortar as a mixture of a binding material, fine aggregate, and water. Common binding materials are cement and lime, while sand and surkhi are typically used as fine aggregates. The types of mortars described include cement mortar, lime mortar, light weight mortar, fire resistant mortar, and mud mortar. Cement mortar uses cement and sand and develops high strength. Lime mortar uses lime and sand or surkhi and is used above ground. Light weight mortar adds materials like wood or fibers. Fire resistant mortar uses special cement for lining fireplaces. Mud mortar is the cheapest but weakest
Characteristic study on pervious concrete
This document summarizes a study on the characteristics of pervious concrete. The study tested 7 different mixes of pervious concrete that varied the type and size of coarse aggregate and use of fine aggregate. 42 concrete specimens were cast and tested for compressive strength, flexural strength, and void ratio. The mix with river sand fine aggregate and 12mm coarse aggregate (M4) performed best with 83% higher compressive strength, 72% higher flexural strength, and 51% lower void ratio than the control mix without fine aggregate (M1). In general, the addition of fine aggregate improved the strength of pervious concrete while reducing the void ratio.
No fine concrete. or pervious concrete
The document discusses no fines concrete, also called porous concrete or permeable concrete. It provides information on the student's name and department, then defines no fines concrete as a type of concrete with high porosity that allows water to pass through, reducing runoff. No fines concrete consists of cement, a single size of coarse aggregate, and water, without fine aggregates. It has a void content of 30-40% and strengths from 3.5-28 MPa depending on ratios and compaction. No fines concrete has benefits for water management, land development, and mitigating pollution while reducing heat islands. Regular cleaning is needed to maintain permeability.
Cement by Nikhil Pakwanne
This document discusses cement, including its composition, manufacturing process, types, storage, field and laboratory tests. Cement is produced by burning and crushing limestone and clay. The main steps are mixing raw materials, burning at high temperatures, and grinding the resulting clinker along with gypsum. Common cement types include ordinary Portland cement, Portland pozzolana cement, and colored cement. Proper storage and testing ensures the quality and performance of cement.
No fines concrete
No fines concrete, also known as pervious concrete, is a special type of concrete that contains no fine aggregates. It has a high void content of 20-35% which allows water to pass through easily. Due to its porous nature, no fines concrete has applications in structures like parking lots, pavements, and drainage systems where permeability is important. It also provides benefits like lower costs, better insulation, and reduced stormwater runoff compared to regular concrete.
Types of CONCRETE
The document discusses different types of ready-mix concrete available from CEMEX with special properties and performance. It describes standard ready-mix concrete as the most common type, prepared off-site for quality control. It also mentions architectural concrete which provides aesthetic finishes, rapid-setting concrete for accelerated construction, and fiber-reinforced concrete which increases durability and crack resistance. Additional types discussed include fluid-fill concrete for pipe installation, roller-compacted concrete for spillways, self-consolidating concrete with high strengths, pervious concrete for drainage, and antibacterial concrete for clean environments.
Flyash in roads
Fly ash is a byproduct of coal combustion in thermal power plants. Huge quantities of fly ash are generated and can be used beneficially in road construction. Fly ash has physical and chemical properties making it suitable for use in embankments and as a stabilizer in subgrades and bases. When used in embankments, fly ash must be compacted properly and protected with an earthen cover to prevent erosion. Engineering tests are required to evaluate the properties of fly ash before using it in road construction. National highway authorities are increasingly using fly ash to reduce costs and promote sustainable construction practices.
Pavement Surfacing Materials
This document discusses different types of modified bituminous materials used in pavement construction including polymer modified bitumen, bitumen rubber mixes, stone matrix asphalt, and warm mix asphalt. It provides details on the composition and properties of these materials. Polymer modified bitumen involves adding polymers like SBS or EVA to bitumen to improve its high temperature stability and resistance to deformation. Stone matrix asphalt contains a high percentage of coarse aggregate that forms an interlocking skeleton structure, filled with bitumen and filler, to provide durability and resist permanent deformation on heavily trafficked roads.
Rice husk ash high performance concrete
Rice husk ash is a byproduct of burning rice husks. It can be mixed with concrete to increase workability and improve strength and durability properties. The document discusses how rice husk ash concrete is produced by partially replacing cement with rice husk ash. It provides details on the chemical and physical properties of rice husk ash and its effects on concrete properties like strength, permeability, and setting time. Rice husk ash concrete is found to be stronger and more resistant to chloride penetration compared to ordinary concrete. Additionally, using rice husk ash in concrete can help reduce carbon dioxide emissions from cement production.
Vacuum concrete
Vacuum concrete is the type of concrete in which the excess water is removed for improving concrete strength.
The water is removed by use of vacuum mats connected to a vacuum pump.
The main aim of this technique is to extract extra water from concrete surface using vacuum dewatering.
Water in concrete
Water plays a key role in cement concrete as it acts as a reactant in the chemical process of hydration that provides concrete its strength over time. The water-cement ratio is an important factor, with lower ratios producing higher strength concrete. Water used for mixing must meet requirements for quality and impurities. Admixtures can be used to improve workability or reduce the water content. Proper curing is also important for achieving design strength and durability of the concrete. Sprayed concrete has advantages over poured concrete such as lower permeability and faster strength gain.
Self compacting concrete
Self-compacting concrete (SCC) is a highly flowable concrete that can spread and consolidate under its own weight without vibration or compaction. Researchers at the University of Tokyo developed SCC in the late 1980s to address labor shortages. By the early 1990s, Japan was using SCC without vibration, and its use spread to other countries. SCC offers benefits like reduced labor costs, faster construction, and improved safety and finishes. It requires special mix designs using superplasticizers, viscosity agents, and mineral admixtures to achieve flowability, passing ability through reinforcement, and resistance to segregation.
Self compaction concrete
This document provides an overview of self-compacting concrete (SCC), including its materials, properties, tests, mix design, applications, and conclusions. SCC is defined as concrete that can flow and fill formwork without vibration due to its high deformability and passing ability. Key points include that SCC uses superplasticizers and viscosity modifying agents, has good filling and passing abilities, and sees applications in reinforced structures like bridges and tall buildings where concrete placement is difficult. The document concludes that SCC can save time and costs while enhancing quality and durability for construction.
Bituminous pavement
The document discusses different types of bituminous pavement used in highway engineering. It describes how bituminous pavement is made by mixing heated aggregates like crushed stone with heated asphalt binders. It then lists various types of bituminous pavement like asphalt concrete and discusses their properties and appropriate uses based on traffic levels. The document also discusses factors that can lead to failures of bituminous concrete pavement like excessive loads beyond the pavement's strength.
Retarder(14 cv245)
This document discusses the use of gypsum and sugar as retarding admixtures in concrete. Retarders are used to slow the chemical process of hydration, allowing concrete to remain workable longer without changing its mechanical properties. Tests were conducted to determine the setting time and compressive strength of concrete with different levels of gypsum and sugar added. The results showed that 2% gypsum and 0.04% sugar provided the optimal initial setting time and compressive strength for the concrete. Over-dosing the retarders resulted in weaker concrete.
Self compacting concrete
Self-compacting concrete (SCC) was developed in Japan in the 1980s to achieve complete compaction without vibration. SCC flows under its own weight, fills formwork and passes through reinforced areas without segregation of ingredients. It consists of cement, fine and coarse aggregates, chemical and mineral admixtures. Superplasticizers and viscosity modifying agents provide workability and stability. Tests like slump flow, V-funnel, and J-ring evaluate filling ability, passing ability and resistance to segregation. SCC offers benefits of reduced labor, better compaction and surface finish compared to conventional concrete but requires more precise material proportions and quality control.
A Compatibility Study on Different Types of Cement and Plasticizer
It has long been a concrete technologist's dream to discover method of making concrete at the lowest possible water/cement ratio while maintaining a high workability. To a considerable extent this dream has been fulfilled with the advent of super plasticizers. It has added a new dimension to the application of admixtures with regards to production of high strength and flow able concretes. It is now possible to produce concrete with compressive strength of the order of 90Mpa (90 N/mm2). In the wake of energy conservation policy and diminishing supplies of high quality raw materials, there is a need to use marginal quality cements and aggregates for the production of concrete. In such instances the use of plasticizers/super plasticizers permits the production of concrete at low water/ cement ratios. We have taken ultra tech opc cement & coromandal ppc cement to find the compatibility by adding perma plast (plasticizer). The water cement ratio was maintained as 0.40 &0.45 for OPC & PPC respectively. To study the effect of these PP on various properties of concrete. The dosage of plasticizers/super plasticizers was measured as 1.5% for Perma plast for OPC & 1.3% for PPC by the weight of cement.
Report on Types of Cement_TusharDas_SEM5.pdf
This document discusses different types of cement and their properties. It outlines 10 main types of cement:
1. Ordinary Portland Cement (OPC) is the most widely used type for concrete, mortar, and plaster construction.
2. Portland Pozzolana Cement (PPC) has high chemical resistance and is used in marine structures, bridges, and mass concrete works.
3. Rapid and extra rapid hardening cements gain strength faster, used for quick construction projects.
4. Low heat cement produces less heat during curing and is used in mass concrete like dams. Sulfate resisting cement is used where soils/water contain sulfates.
It also outlines physical
More Related Content
What's hot
Cement Australia - General Purpose Cement Data Sheet
General Purpose Cement is a versatile building material that complies with Australian standards for cement. It can be used in a wide range of construction applications including concrete slabs, structural elements, pipes, and more. GP cement provides consistency and works well with various admixtures and supplementary materials. Users should follow standards for mixing, curing, and testing to achieve appropriate strength and performance for their project needs.
Foamed cement
Foamed cement is created by injecting gas, usually nitrogen, into a cement slurry along with foaming agents and stabilizers. This creates a stable, lightweight cement with small, discrete bubbles that do not coalesce. Foamed cement can have densities ranging from 4 to 18 pounds per gallon, making it suitable for situations requiring lower hydrostatic pressure. It has advantages over conventional cement such as better strength, ductility, insulation properties, and ability to withstand mechanical stresses. While foamed cement jobs require more complex equipment and precision, it can improve zonal isolation in challenging well conditions.
Topic 1
Here are the steps to solve this nominal mix design problem based on mass:
1) Given: Cement mass = 150 kg
Mix ratio = 1:2:4
Densities:
Cement = 1440 kg/m3
Fine aggregate = 1640 kg/m3
Coarse aggregate = 1390 kg/m3
2) Calculate cement volume:
Cement mass / Cement density = Volume
150 kg / 1440 kg/m3 = 0.104 m3
3) Calculate fine aggregate volume based on mix ratio:
Cement volume x Fine aggregate ratio = Fine aggregate volume
0.104 m3 x 2 = 0.208 m3
mortar, concrete, bitumen, paints
The document discusses various construction materials including mortar, concrete, bitumen, and paints. It provides details on the composition and uses of different types of mortar such as lime mortar, cement mortar, and lime-cement mortar. It also discusses the main types of concrete including reinforced cement concrete. The document defines bitumen as a semi-solid hydrocarbon product derived from crude oil and lists its uses. Finally, it provides a basic definition of paint and some common uses such as artwork, decoration, surface protection, and warnings.
Mortors
The document discusses different types of mortars used in construction. It defines mortar as a mixture of a binding material, fine aggregate, and water. Common binding materials are cement and lime, while sand and surkhi are typically used as fine aggregates. The types of mortars described include cement mortar, lime mortar, light weight mortar, fire resistant mortar, and mud mortar. Cement mortar uses cement and sand and develops high strength. Lime mortar uses lime and sand or surkhi and is used above ground. Light weight mortar adds materials like wood or fibers. Fire resistant mortar uses special cement for lining fireplaces. Mud mortar is the cheapest but weakest
Characteristic study on pervious concrete
This document summarizes a study on the characteristics of pervious concrete. The study tested 7 different mixes of pervious concrete that varied the type and size of coarse aggregate and use of fine aggregate. 42 concrete specimens were cast and tested for compressive strength, flexural strength, and void ratio. The mix with river sand fine aggregate and 12mm coarse aggregate (M4) performed best with 83% higher compressive strength, 72% higher flexural strength, and 51% lower void ratio than the control mix without fine aggregate (M1). In general, the addition of fine aggregate improved the strength of pervious concrete while reducing the void ratio.
No fine concrete. or pervious concrete
The document discusses no fines concrete, also called porous concrete or permeable concrete. It provides information on the student's name and department, then defines no fines concrete as a type of concrete with high porosity that allows water to pass through, reducing runoff. No fines concrete consists of cement, a single size of coarse aggregate, and water, without fine aggregates. It has a void content of 30-40% and strengths from 3.5-28 MPa depending on ratios and compaction. No fines concrete has benefits for water management, land development, and mitigating pollution while reducing heat islands. Regular cleaning is needed to maintain permeability.
Cement by Nikhil Pakwanne
This document discusses cement, including its composition, manufacturing process, types, storage, field and laboratory tests. Cement is produced by burning and crushing limestone and clay. The main steps are mixing raw materials, burning at high temperatures, and grinding the resulting clinker along with gypsum. Common cement types include ordinary Portland cement, Portland pozzolana cement, and colored cement. Proper storage and testing ensures the quality and performance of cement.
No fines concrete
No fines concrete, also known as pervious concrete, is a special type of concrete that contains no fine aggregates. It has a high void content of 20-35% which allows water to pass through easily. Due to its porous nature, no fines concrete has applications in structures like parking lots, pavements, and drainage systems where permeability is important. It also provides benefits like lower costs, better insulation, and reduced stormwater runoff compared to regular concrete.
Types of CONCRETE
The document discusses different types of ready-mix concrete available from CEMEX with special properties and performance. It describes standard ready-mix concrete as the most common type, prepared off-site for quality control. It also mentions architectural concrete which provides aesthetic finishes, rapid-setting concrete for accelerated construction, and fiber-reinforced concrete which increases durability and crack resistance. Additional types discussed include fluid-fill concrete for pipe installation, roller-compacted concrete for spillways, self-consolidating concrete with high strengths, pervious concrete for drainage, and antibacterial concrete for clean environments.
Flyash in roads
Fly ash is a byproduct of coal combustion in thermal power plants. Huge quantities of fly ash are generated and can be used beneficially in road construction. Fly ash has physical and chemical properties making it suitable for use in embankments and as a stabilizer in subgrades and bases. When used in embankments, fly ash must be compacted properly and protected with an earthen cover to prevent erosion. Engineering tests are required to evaluate the properties of fly ash before using it in road construction. National highway authorities are increasingly using fly ash to reduce costs and promote sustainable construction practices.
Pavement Surfacing Materials
This document discusses different types of modified bituminous materials used in pavement construction including polymer modified bitumen, bitumen rubber mixes, stone matrix asphalt, and warm mix asphalt. It provides details on the composition and properties of these materials. Polymer modified bitumen involves adding polymers like SBS or EVA to bitumen to improve its high temperature stability and resistance to deformation. Stone matrix asphalt contains a high percentage of coarse aggregate that forms an interlocking skeleton structure, filled with bitumen and filler, to provide durability and resist permanent deformation on heavily trafficked roads.
Rice husk ash high performance concrete
Rice husk ash is a byproduct of burning rice husks. It can be mixed with concrete to increase workability and improve strength and durability properties. The document discusses how rice husk ash concrete is produced by partially replacing cement with rice husk ash. It provides details on the chemical and physical properties of rice husk ash and its effects on concrete properties like strength, permeability, and setting time. Rice husk ash concrete is found to be stronger and more resistant to chloride penetration compared to ordinary concrete. Additionally, using rice husk ash in concrete can help reduce carbon dioxide emissions from cement production.
Vacuum concrete
Vacuum concrete is the type of concrete in which the excess water is removed for improving concrete strength.
The water is removed by use of vacuum mats connected to a vacuum pump.
The main aim of this technique is to extract extra water from concrete surface using vacuum dewatering.
Water in concrete
Water plays a key role in cement concrete as it acts as a reactant in the chemical process of hydration that provides concrete its strength over time. The water-cement ratio is an important factor, with lower ratios producing higher strength concrete. Water used for mixing must meet requirements for quality and impurities. Admixtures can be used to improve workability or reduce the water content. Proper curing is also important for achieving design strength and durability of the concrete. Sprayed concrete has advantages over poured concrete such as lower permeability and faster strength gain.
Self compacting concrete
Self-compacting concrete (SCC) is a highly flowable concrete that can spread and consolidate under its own weight without vibration or compaction. Researchers at the University of Tokyo developed SCC in the late 1980s to address labor shortages. By the early 1990s, Japan was using SCC without vibration, and its use spread to other countries. SCC offers benefits like reduced labor costs, faster construction, and improved safety and finishes. It requires special mix designs using superplasticizers, viscosity agents, and mineral admixtures to achieve flowability, passing ability through reinforcement, and resistance to segregation.
Self compaction concrete
This document provides an overview of self-compacting concrete (SCC), including its materials, properties, tests, mix design, applications, and conclusions. SCC is defined as concrete that can flow and fill formwork without vibration due to its high deformability and passing ability. Key points include that SCC uses superplasticizers and viscosity modifying agents, has good filling and passing abilities, and sees applications in reinforced structures like bridges and tall buildings where concrete placement is difficult. The document concludes that SCC can save time and costs while enhancing quality and durability for construction.
Bituminous pavement
The document discusses different types of bituminous pavement used in highway engineering. It describes how bituminous pavement is made by mixing heated aggregates like crushed stone with heated asphalt binders. It then lists various types of bituminous pavement like asphalt concrete and discusses their properties and appropriate uses based on traffic levels. The document also discusses factors that can lead to failures of bituminous concrete pavement like excessive loads beyond the pavement's strength.
Retarder(14 cv245)
This document discusses the use of gypsum and sugar as retarding admixtures in concrete. Retarders are used to slow the chemical process of hydration, allowing concrete to remain workable longer without changing its mechanical properties. Tests were conducted to determine the setting time and compressive strength of concrete with different levels of gypsum and sugar added. The results showed that 2% gypsum and 0.04% sugar provided the optimal initial setting time and compressive strength for the concrete. Over-dosing the retarders resulted in weaker concrete.
Self compacting concrete
Self-compacting concrete (SCC) was developed in Japan in the 1980s to achieve complete compaction without vibration. SCC flows under its own weight, fills formwork and passes through reinforced areas without segregation of ingredients. It consists of cement, fine and coarse aggregates, chemical and mineral admixtures. Superplasticizers and viscosity modifying agents provide workability and stability. Tests like slump flow, V-funnel, and J-ring evaluate filling ability, passing ability and resistance to segregation. SCC offers benefits of reduced labor, better compaction and surface finish compared to conventional concrete but requires more precise material proportions and quality control.
What's hot (20)
Cement Australia - General Purpose Cement Data Sheet
Cement Australia - General Purpose Cement Data Sheet
Similar to Industrial Services and Consultancy
A Compatibility Study on Different Types of Cement and Plasticizer
It has long been a concrete technologist's dream to discover method of making concrete at the lowest possible water/cement ratio while maintaining a high workability. To a considerable extent this dream has been fulfilled with the advent of super plasticizers. It has added a new dimension to the application of admixtures with regards to production of high strength and flow able concretes. It is now possible to produce concrete with compressive strength of the order of 90Mpa (90 N/mm2). In the wake of energy conservation policy and diminishing supplies of high quality raw materials, there is a need to use marginal quality cements and aggregates for the production of concrete. In such instances the use of plasticizers/super plasticizers permits the production of concrete at low water/ cement ratios. We have taken ultra tech opc cement & coromandal ppc cement to find the compatibility by adding perma plast (plasticizer). The water cement ratio was maintained as 0.40 &0.45 for OPC & PPC respectively. To study the effect of these PP on various properties of concrete. The dosage of plasticizers/super plasticizers was measured as 1.5% for Perma plast for OPC & 1.3% for PPC by the weight of cement.
Report on Types of Cement_TusharDas_SEM5.pdf
This document discusses different types of cement and their properties. It outlines 10 main types of cement:
1. Ordinary Portland Cement (OPC) is the most widely used type for concrete, mortar, and plaster construction.
2. Portland Pozzolana Cement (PPC) has high chemical resistance and is used in marine structures, bridges, and mass concrete works.
3. Rapid and extra rapid hardening cements gain strength faster, used for quick construction projects.
4. Low heat cement produces less heat during curing and is used in mass concrete like dams. Sulfate resisting cement is used where soils/water contain sulfates.
It also outlines physical
Krystol Mortar Admixture Presentation at World of Concrete 2011
KMA is an admixture for cementitious mortar. It contains Kryton’s unique Krystol® technology that reacts with the cementitious materials in the mortar to form hydration crystals. These needle-like crystals block the capillary pores and micro-cracks within the mortar to dramatically reduce permeability and water absorption of mortar rendering over brick, block and other masonry walls.
materials of roads.pptx
This document discusses methods for waterproofing roads to increase their lifespan. It describes materials commonly used for waterproofing cement concrete roads and bituminous roads, including calcium stearate, petroleum wax emulsions, rubber crumbs, and paving fabrics. The document explains how these materials are added or applied to roads to fill cracks and prevent water infiltration that can cause potholes over freeze-thaw cycles. Waterproofing roads in these ways helps strengthen their structure, reduce repairs, and lower lifecycle costs while improving safety.
Advanced Concrete Technic Erbil Polytechnic University
Advanced Concrete Technic Lectures Erbil Polytechnic University
Civil Engineering Department
#Lecturer: Rafah Rasheed Abdul Majeed
#Advanced Concrete Technic
Foam Concrete/Light Weight Concrete.
Lightweight concrete, also known as foam concrete or foamed concrete, is a cement-based material that is produced using a minimum of 20% foam to replace fine aggregate, resulting in a density of 400-1600 kg/m3. It has advantages over normal concrete such as lower weight, improved thermal insulation and fire resistance, cost savings, and easier construction. Some disadvantages include increased mixing time and difficulty in finishing due to its porous nature. Foam concrete has a variety of applications and has been used successfully in marine structures, bridges, and railway platforms.
COLD MIX ASPHALT.pptx
The document provides an introduction to cold mix asphalt, which is a bituminous material made by mixing cold aggregates with an asphalt emulsion and water without requiring heating. It is manufactured in pugmills that blend the materials according to a job mix formula. The document discusses the benefits of cold mix asphalt, including flexibility, resistance to damage from temperature fluctuations, moisture and rutting/cracking. It also requires no heating for construction and allows use of recycled materials. However, disadvantages include high air void content when compacted and weak early life strength due to trapped water.
COLD bro v13
CreteDefender produces concrete protection products. Their flagship product, CreteDefender P2, is a chemical treatment that penetrates concrete to permanently strengthen and protect it from damage from salts, water, freeze-thaw cycles, and abrasion. Their newer product, CreteDefender MS2, is a water repellent sealer that provides 10 years of protection for concrete as well as other masonry surfaces. Both products help prevent costly repairs and replacements of deteriorating concrete.
Krystol Magazine 17.1
The document discusses a risky repair project for a South African mine. The mine's slag granulation cooling tower had developed cracks over 4000 square meters, leaking extremely hot water. Repairs had to be done while the 6-meter deep reservoir remained full of near-boiling water. The only successful test was using Kryton's Krystol Crack Repair System and surface-applied waterproofing. The repair team used Kryton products to stop water flow through cracks and fully waterproof the reservoir while it remained in use.
ppt.pptx
This document summarizes a project on the effects of fly ash on the properties of M20 grade concrete. Fly ash was substituted for cement in percentages ranging from 0-40% by weight. Testing showed that workability and compressive strength generally increased with fly ash content up to 30%, with maximum strengths achieved at 30% replacement. Above 30% replacement, compressive strength began to decrease. The results indicate that partial replacement of cement with fly ash can improve concrete properties in a cost-effective manner, demonstrating fly ash's viability as a supplementary cementitious material.
cement - uses, types and manufacturing process.pptx
Cement is a mixture of calcareous, siliceous, argillaceous and other substances that is used as a binding material. There are natural and artificial cements. Natural cement involves burning and crushing limestone and lime, while artificial cement involves burning materials at a high temperature and adding gypsum. The composition of cement includes lime, silica, alumina and iron oxide, with the proportions of each ingredient affecting the strength and properties. There are various types of cement used for different purposes, such as ordinary Portland cement, rapid hardening cement, and sulfate resisting cement. Cement is used for construction activities like preparing mortar and concrete, and for building fireproof, chemical resistant and water retaining structures.
IPANEX LIQUID CRYSTALLINE WATERPROOFING ADMIX
IPANEX is a liquid admixture added to concrete to make it waterproof by densifying its microstructure. It works by controlling hydration to produce a more homogeneous, fine-grained structure with smaller, more tortuous pores that restrict water penetration. Testing shows IPANEX concrete has significantly reduced permeability and chloride ion ingress. It provides advantages like increased strength, durability, corrosion resistance and waterproofness without organic chemicals that could degrade over time. IPANEX is recommended for applications requiring impermeable concrete under water pressure like foundations, tanks, and marine structures.
ADVANCED CONCRETE TECHNOLOGY (CE361)
Aggregates: Review of types; sampling and testing; effects on properties of concrete, production of artificial aggregates.
Cements: Review of types of cements, chemical composition; properties and tests, chemical and physical process of hydration,Blended cements.Properties of fresh concrete - basics regarding fresh concrete –
mixing, workability, placement, consolidation, and curing,
segregation and bleeding
Chemical Admixtures: types and classification; actions and
interactions; usage; effects on properties of concrete
Mineral Admixtures: Flyash, ground granulated blast furnace slag,
metakaolin, rice-husk ash and
silica fume; chemical composition; physical characteristics; effects
on properties of concrete; advantages and disadvantages.
Proportioning of concrete mixtures: Factors considered in the design of mix . BIS Method, ACI method.,Properties of hardened concrete: Strength- compressive tensile
and flexure - Elastic properties - Modulus of elasticity - Creep-
factors affecting creep, effect of creep - shrinkage- factors affecting
shrinkage, plastic shrinkage, drying shrinkage, autogeneous
shrinkage, carbonation shrinkage ,Durability of concrete: Durability concept; factors affecting,
reinforcement corrosion; fire resistance; frost damage; sulfate
attack; alkali silica reaction; concrete in sea water, statistical quality
control, acceptance criteria as per BIS code.
Non-destructive testing of concrete: Surface Hardness, Ultrasonic,
Penetration resistance, Pull-out test, chemical testing for chloride
and carbonation- core cutting - measuring reinforcement cover
Special concretes - Lightweight concrete- description of various
types -High strength concrete - Self compacting concrete -Roller
compacted concrete – Ready mixed concrete – Fibre reinforced
concrete - polymer concrete
Special processes and technology for particular types of
structure - Sprayed concrete; underwater concrete, mass concrete;
slip form construction, Prefabrication technology
Cemscreed hm(f) special
CEMSCREED HM(F) SPECIAL is a single component thixotropic, dual shrinkage-compensated, fibre reinforced formulation for structural concrete repairs. It can be applied vertically or overhead by low-pressure wet-spraying or hand troweling. CEMSCREED HM(F) SPECIAL is reinforced with special alkali resistant polypropylene fibres for exceptional resistance to cracking. Repairing with CEMSCREED HM(F) SPECIAL does not require any polymer based bonding agent on concrete surface. Specially designed formulation curtails the setting time and offers high early strength to the required patch.
CONCRETE1.PPT
Concrete is a versatile construction material made by mixing portland cement, water, aggregates like sand and gravel, and sometimes admixtures. Its strength and properties depend on the proportions of these components. Proper mixing, placing, finishing, and curing of concrete are necessary to achieve high quality results. When ordering concrete, customers should discuss specifications like intended use, cement type, minimum cement content, water-cement ratio, admixtures, air content, desired strength, and any other special considerations.
water proof roads.pptx
Waterproofing roads prevents pothole formation and increases pavement lifespan. Materials used for waterproofing include calcium stearate, petroleum wax emulsions, rubber crumbs, and mastic asphalt polymers. Construction involves pre-treating surfaces, applying tack coats, and using specialized fabrics and seals between layers. Waterproofed roads have advantages like improved strength, reduced repairs and accidents, energy efficiency, and sustainability.
CHLORIS
This document provides information about Chloris Speciality Chemicals, including their headquarters, factory, sales offices, contact information, and product listings. It introduces Chloris as a pioneer in the construction chemicals industry offering high quality building chemicals. It then lists various product lines including concrete repair mortars, curing compounds, shuttering release agents, bonding agents, flooring systems, renders and plasters, engineering grouts, tile adhesives and grouts, epoxy adhesives and grouts, mastic adhesives, latex motor bed systems, waterproofing, protective coatings, bitumen products, and miracle sealant products.
Quiz 1
Concrete is the most widely used construction material due to its durability, affordability, and ability to be cast into any shape. A proper concrete mix design targets compressive strength, workability, durability, and quality control. The key aspects of mix proportioning include selecting aggregates based on properties like composition and size, using an optimized gradation, and determining the right water-cement ratio to achieve the desired strength and minimize waste. Chemical admixtures can be added to improve properties like freeze-thaw resistance or to accelerate or retard setting times for different construction needs.
underwater-construction-55849d4caf8cd.pptx
The document discusses techniques for underwater construction, including caissons, cofferdams, and different methods for placing concrete underwater. Caissons and cofferdams are the two main techniques used to create a dry work environment for underwater construction. Caissons are permanent watertight structures used for foundations, while cofferdams are temporary structures built with sheet piling. Common methods for placing concrete underwater include the tremie method, pump method, toggle bags, and bagwork. The tremie method is the standard for major structures due to reliability in placing high-quality concrete.
Similar to Industrial Services and Consultancy (20)
A Compatibility Study on Different Types of Cement and Plasticizer
A Compatibility Study on Different Types of Cement and Plasticizer
Krystol Mortar Admixture Presentation at World of Concrete 2011
Krystol Mortar Admixture Presentation at World of Concrete 2011
Advanced Concrete Technic Erbil Polytechnic University
Advanced Concrete Technic Erbil Polytechnic University
cement - uses, types and manufacturing process.pptx
cement - uses, types and manufacturing process.pptx
Recently uploaded
House Construction Cost in Haldwani
If you're Planning to Build a House in Haldwani, Understanding the House Construction Cost in Haldwani is crucial. It's important to grasp the direct and indirect cost factors entailed in the Construction process before Initiating any work. This Understanding is pivotal for Efficient Budget allocation, allowing you to plan your finances more Effectively. Construction expenses can vary Significantly, Influenced by Diverse Elements such as site Location, raw material prices, Labour charges, and various other variables. Here at Geomatrix, we pride Ourselves on offering competitive rates for house construction in Haldwani, ensuring affordability without Compromising on quality and providing the best options within your budget. For a precise evaluation of the cost involved in constructing your dream home, consult our team of architects and construction experts.
For more information visit:
https://geomatrix.co.in/services/real-estate-project-management-in-haldwani/
Hawthorn Module 1 Coverted to Slide Show - 04.06.2024.docx
half screen text in white and headings in orange and background in blue, the other half of the screen that relates to the text
原版制作(Greenwich毕业证书)格林威治大学毕业证PDF成绩单一模一样
学校原件一模一样【微信：741003700 】《(Greenwich毕业证书)格林威治大学毕业证PDF成绩单》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
The KA Housing - Catalogue - Listing Turkey
Welcome to KA Housing, a distinguished real estate development nestled in the heart of Eyüpsultan, one of Istanbul’s most promising districts.
Just 10 minutes from the bustling city center, Eyüpsultan offers a serene escape with the convenience of urban living. The direct metro line ensures seamless connectivity to all parts of Istanbul, making it an ideal location for residents who seek both tranquility and vibrancy.
KA Housing boasts unparalleled accessibility, with proximity to Istanbul Airport only 30 minutes away, facilitating easy international travel. Effortless city access is guaranteed by direct metro and transportation links to Istanbul’s cultural and commercial hubs. Quick access to key metro lines connects you to every corner of the city within minutes, making commuting and exploring the city hassle-free.
The development offers luxurious living spaces with a range of unit layouts from 1+1 to 4+1, designed with meticulous attention to detail. Each unit features balconies or terraces, providing stunning vistas of Istanbul and enhancing the living experience. High-quality materials and superior craftsmanship ensure durability and elegance, while sound-proof insulation and high ceilings (2.95 m) offer comfort and sophistication.
Residents of KA Housing enjoy exclusive on-site amenities, including a state-of-the-art gym, outdoor swimming pool, yoga area, and walking paths. Entertainment options abound with a private cinema, children’s playground, and a variety of dining options including a café and restaurant. Security and convenience are paramount with 24/7 security, a dedicated carpark garage, and an IP intercom system.
KA Housing represents a prime investment opportunity with limited availability in a high-demand area, ensuring enduring value and potential for lucrative returns. Homes in this development provide exceptional value without compromising on quality, offering affordable luxury for discerning buyers. The construction is of the highest quality, built to the latest seismic and disaster resistance standards, ensuring safety and resilience.
The community and surroundings of KA Housing are enriched by close proximity to prestigious universities such as Haliç University, Bilgi University, and Istanbul Ticaret University, making it an ideal location for students and academics. The development is adjacent to the Alibeyköy stream leading into the Halic waters, offering serene natural escapes amidst lush greenery. Residents can enjoy the cultural richness of the area, surrounded by historical and cultural landmarks that blend leisure, nature, and culture seamlessly.
https://listingturkey.com/property/the-ka-housing/
AVRUPA KONUTLARI ESENTEPE - ENGLISH - Listing Turkey
Looking for a new home in Istanbul? Look no further than Avrupa Konutlari Esentepe! Our beautifully designed homes provide the perfect blend of luxury and comfort, making them the perfect choice for anyone looking for a high-quality home in the city.
With a wide range of apartment types available, from 1+1 to 4+1, we have something to suit every need and budget. Each apartment is designed with attention to detail and features spacious and bright living areas, making them the perfect place to relax and unwind after a long day.
One of the things that sets Avrupa Konutlari Esentepe apart from other developments is our focus on creating a community that is both comfortable and convenient. Our homes are surrounded by lush green spaces, perfect for enjoying a peaceful stroll or having a picnic with friends and family. Additionally, our complex includes a variety of social and recreational amenities, such as swimming pools, sports fields, and playgrounds, making it easy for residents to stay active and socialize with their neighbors.
https://listingturkey.com/property/avrupa-konutlari-esentepe/
Sense Levent Kagithane Catalog - Listing Turkey
Sense Levent offers a luxurious living experience in the heart of Istanbul’s vibrant Levent district.
This cutting-edge development seamlessly integrates modern design with natural elements, featuring live evergreen plants maintained by an advanced irrigation system, ensuring lush greenery year-round.
The building’s elegant ceramic balconies are both stylish and durable, enhancing the overall aesthetic and functionality. Residents can enjoy the 700m Sky Lounge, which provides breathtaking views of Istanbul and a perfect space to relax and unwind.
Sense Levent promotes a healthy and active lifestyle with a full gym, swimming pool, sauna, and steam room, all available in the building. The interiors are crafted with high-quality materials, ensuring a luxurious and inviting living space.
Designed with young professionals in mind, Sense Levent features 1+1 and 2+1 units with smart floor plans and balconies. The project promises high investment returns, with an expected annual return of 6.5-7%, significantly above Istanbul’s average ROI.
Located in the rapidly growing and highly desirable Levent area, the development benefits from ongoing urban regeneration projects. Its prime location offers proximity to shopping malls, municipal buildings, universities, and public transportation, adding immense value to your investment.
Early investors can take advantage of discounted units during the construction phase, with an expected capital appreciation of +45% USD upon completion. Property Turkey provides comprehensive rental management services, ensuring a seamless and profitable investment experience.
Additionally, robust legal support and significant tax advantages are available through Property Turkey’s licensed Real Estate Investment Fund. Levent is a dynamic urban hub, ideal for young professionals with its numerous corporate headquarters and shopping malls.
Sense Levent is more than just a residence; it’s a place where dreams and opportunities come to life. Contact us today to secure your place in this exclusive development and experience the best of Istanbul living. Sense Levent: Sense the Opportunity. Live the Dream.
https://listingturkey.com/property/sense-levent/
Recent Trends Fueling The Surge in Farmhouse Demand in India
Embarking on the journey to acquire a farmhouse for sale is just the beginning; the real investment lies in crafting an environment that contributes to our mental and physical well-being while satisfying the soul. At Farmlandbazaar.com, India’s leading online marketplace dedicated to farm land, farmhouses, and agricultural lands, we understand the importance of transforming a humble farmland into a warm and inviting sanctuary. Let's explore the fundamental aspects that can elevate your farmhouse into a tranquil haven.
Listing Turkey - Yeni Eyupevleri Istanbul
Discover Yeni Eyup Evleri 2, nestled among the rising values of Eyupsultan, offering the epitome of modern living in Istanbul.
With its spacious living areas, contemporary architecture, and meticulous details, Yeni Eyup Evleri 2 is poised to be the star of your happiest moments. Situated in the new favorite district of Eyupsultan, claim your spot and unlock the doors to a peaceful life alongside your loved ones. Nestled next to the historical and natural beauties of Eyupsultan, embrace the comfort of modern living and rediscover life.
Social Amenities:
Yeni Eyup 2 offers a life filled with joy with its green landscaping areas, gym, sauna, children’s play areas, café, outdoor pool, and basketball court. Reserve your place for unforgettable moments!
Reliable Structure:
With 1+1, 2+1, and 3+1 apartment options, Yeni Eyup Evleri 2 is designed with first-class materials and craftsmanship. The doors to a safe and comfortable life are here! Choose the option that suits you best and step into your dream home.
Project:
Yeni Eyup 2 is conveniently located, with Istanbul Airport just 26 minutes away, the Mecidiyeköy Metro Line 4 minutes away, and the Tram Stop 5 minutes away, making your life easier with its central location.
Location:
Your home is positioned in a privileged location, providing easy access to the city center, shopping malls, restaurants, schools, and other important places.
Yeni Eyup 2 offers 1+1, 2+1, and 3+1 apartment options designed to meet different needs. Find an option suitable for every lifestyle and open the doors to a comfortable life in your dream home.
https://listingturkey.com/property/yeni-eyup-evleri-2/
Gurgaon Industrial Business Association.pdf
Presentation of Industrial Land for development of various business opportunities
Things to Consider When Selling Your House - Summer 2024 Edition
If you're thinking about selling your home this summer, make sure you take some time to read this guide so that you understand the market.
SVN Live 6.10.24 Weekly Property Broadcast
The SVN® organization shares a portion of their new weekly listings via their SVN Live® Weekly Property Broadcast. Visit https://svn.com/svn-live/ if you would like to attend our weekly call, which we open up to the brokerage community.
制作(ucr毕业证书)加州大学河滨分校毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【(ucr毕业证书)加州大学河滨分校毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Serviced Apartment Ho Chi Minh For Rental
GVRenting is the leading rental real estate company in Vietnam. We help you to find a serviced apartment for rent in Ho Chi Minh & Saigon. Discover our broad range of rental properties in Vietnam.
For more details https://gvrenting.com/
Victory by Maskeen Group Surrey Floor plans June 2024 PDF
Victory by Maskeen Group Surrey Floor plans June 2024 PDF.
Best Construction Company in Haldwani UK
At Geomatrix, we Pride Ourselves on our Commitment to Superior Craftsmanship and client satisfaction. Our team Consists of Highly Qualified specialists including Architects, Engineers, project Managers, and skilled labourers who work seamlessly together to achieve ourclients' Objectives. Geomatrix is recognized as the Best Construction Company in Haldwani, Dedicated to bringing visions to life with unparalleled Expertise and Professionalism.
For more information visit:
https://geomatrix.co.in/
Recently uploaded (20)
Hawthorn Module 1 Coverted to Slide Show - 04.06.2024.docx
Hawthorn Module 1 Coverted to Slide Show - 04.06.2024.docx
AVRUPA KONUTLARI ESENTEPE - ENGLISH - Listing Turkey
AVRUPA KONUTLARI ESENTEPE - ENGLISH - Listing Turkey
Recent Trends Fueling The Surge in Farmhouse Demand in India
Recent Trends Fueling The Surge in Farmhouse Demand in India
Things to Consider When Selling Your House - Summer 2024 Edition
Things to Consider When Selling Your House - Summer 2024 Edition
G+10 apartment 1- Sustainable apartment building.pdf
G+10 apartment 1- Sustainable apartment building.pdf
Victory by Maskeen Group Surrey Floor plans June 2024 PDF
Victory by Maskeen Group Surrey Floor plans June 2024 PDF
Addis Bleaching Mixed use Apartment- Documentation 6.pdf
Addis Bleaching Mixed use Apartment- Documentation 6.pdf
HollandRow_17x11_Insert_Floorplan_Feature sheet.pdf
HollandRow_17x11_Insert_Floorplan_Feature sheet.pdf
Industrial Services and Consultancy
- 1. Prakash Somji (Col. Retd.), Director www.iscpsconsulting.com [email_address] Date: 1 st June , 2009 © 2009 Industrial Services and Consultancy. All rights reserved.
- 12. Prakash Somji (Col. Retd.), Director Thank You B-1, Spartan Luxury Apartments, Deccan College Road, Yervada, Pune-411006. India. www.iscpsconsulting.com [email_address] Telefax: + 91 020 266 97607 CellPhone: +91 942 200 9173 Thank You © 2009 Industrial Services and Consultancy. All rights reserved.