The document describes the parameter configurations for different control modes of an inverter including V/f control, IM vector control with and without speed sensor, and PM motor control with sensor. It provides details on the parameter blocks and specific parameters for each control mode. Key parameters that are changed frequently during normal usage and those that are changed infrequently are identified. The configuration diagrams show the organization of parameters into monitor, block A, B, and C parameters and how to navigate between them.
Cataloge ge 3.control and_automation_dienhathe.com-4_17_vat300_e_c6-6-2_rev_aDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides information on Fuji Electric's new FRENIC-Mini compact inverter. Key details include:
- The FRENIC-Mini offers high performance control of motors and equipment in a compact package with simple operation and global compatibility.
- It has rich functionality, compact design, easy operation/maintenance, and compatibility with existing Fuji products and networks.
- Specifications include voltage and frequency ranges, overload capabilities, enclosure type, cooling method, and applicable motor ratings from 0.1 to 3.7 kW.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Cataloge ge 3.control and_automation-21_vat300_e_c6-6-4_2_rev_aDien Ha The
Cataloge ge 3.control and_automation-21_vat300_e_c6-6-4_2_rev_a
Catalog GE, Catalog,
Catalog Thiết Bị Điện GE, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp GE, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Cataloge ge 3.control and_automation_dienhathe.com-4_16_vat300_e_c6-6-1_rev_aDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Cataloge ge 3.control and_automation_dienhathe.com-4_17_vat300_e_c6-6-2_rev_aDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
This document provides information on Fuji Electric's new FRENIC-Mini compact inverter. Key details include:
- The FRENIC-Mini offers high performance control of motors and equipment in a compact package with simple operation and global compatibility.
- It has rich functionality, compact design, easy operation/maintenance, and compatibility with existing Fuji products and networks.
- Specifications include voltage and frequency ranges, overload capabilities, enclosure type, cooling method, and applicable motor ratings from 0.1 to 3.7 kW.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Cataloge ge 3.control and_automation-21_vat300_e_c6-6-4_2_rev_aDien Ha The
Cataloge ge 3.control and_automation-21_vat300_e_c6-6-4_2_rev_a
Catalog GE, Catalog,
Catalog Thiết Bị Điện GE, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp GE, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Cataloge ge 3.control and_automation_dienhathe.com-4_16_vat300_e_c6-6-1_rev_aDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
This high performance vector control inverter has complete control over speed and torque. It provides industry-leading control performance through highly accurate speed control, fast response times, and precise torque control. The inverter is available in a wide range of capacities to support flexible applications globally.
2301 manual (v7.0 - 80384 a) (1) gefranDarío Falquéz
This document provides installation and configuration instructions for a configurable controller with software version 7.0. It includes dimensions for panel mounting, cut-out sizes, and instructions for installing multiple instruments side by side or stacked. It also provides technical specifications for the controller's inputs, outputs, power supply, ambient conditions, control functions, alarms, weight, and includes diagrams of the front panel display and buttons. The document describes hardware configuration options for inputs, outputs, power supply, and serial communication interface.
BẢNG GIÁ THIẾT BỊ CÔNG NGHIỆP - TỰ ĐỘNG HÓA
http://haophuong.com/bang-gia-hpc/c145205.html
CTY TNHH HẠO PHƯƠNG
Nhà phân phối thiết bị điện công nghiệp và tự động hóa hàng đầu Việt Nam
Website: www.HaoPhuong.com
RT-300 Series Industrial Joysticks (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog Biến tần Frenic 5000g11 Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
This document provides information on Fuji Electric's FRENIC5000 series of inverters. It summarizes key features of the inverters including:
1) Dynamic torque-vector control which provides high starting torque, smooth acceleration/deceleration, and reduced motor wow at low speeds.
2) Protections such as electronic thermal overload protection, input phase loss protection, and motor protection with PTC thermistor.
3) Advanced functions including 16-step speed control, energy saving operation, PID control, and communications capabilities.
4) The inverters are available in G11S and P11S series for general industrial machines and fans/pumps respectively, from 1/4
Mitsubishi inverter fr-s500 catalog-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Ls catalog thiet bi tu dong i s5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Ưu điểm của AC Servo Siemens Sinamics V90
HIỆU SUẤT TỐI ƯU
Tính năng Tuning một lần và cho phép tuning theo thời gian thực giúp tối ưu hóa hiệu suất của hệ thống.
Tần số xung ngõ vào cao lên đên 1MHz.
Encoder khác nhau giúp đáp ứng các yêu cầu ứng dụng khác nhau.
DỄ SỬ DỤNG
Kết nối đơn giản với hệ thống điều khiển
Điều chỉnh dể dàng và nhân bản thông số
Vận hành dễ dàng với SINAMICS V-ASSISTANT
Tích hợp dễ dàng qua PTI, PROFINET, USS, Modbus RTU
TIẾT KIỆM CHI PHÍ
Tích hợp: Pulse train positioning, internal positioning với traversing block hoặc Modbus
Tích hợp điện trở phanh trong tất cả các kích thước khung
Tích hợp holding brake switch (Frame size 400V)
HOẠT ĐỘNG TIN CẬY
Vòng bi motor chất lượng cao
Tiêu chuẩn cấp độ bảo vệ cho tất cả các loại motor IP65
Tích hợp tính năng bảo vệ Torque Off (STO)
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
Catalog: Biến tần Frenic5000-VG7S-405C Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Mitsubishi inverter freqrol-a700 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Cataloge ge 3.control and_automation_dienhathe.com-4_14_vat300_e_c5-8_rev_bDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Cataloge ge 3.control and_automation-14_vat300_e_c5-8_rev_bDien Ha The
This document describes the analog and digital input/output functions of a drive controller. It discusses:
1) The two analog output channels can be configured for voltage or current output. Various internal data values can be assigned to the analog outputs.
2) One pulse train output channel is available and can be used to output speed or other data as a pulse frequency.
3) There are multiple options for setting speed, torque, and torque bias reference values including analog inputs, serial communication, pulse trains, and parameters. Selection of the active reference can be configured through parameters or digital inputs.
The document describes the DigiFlex® PerformanceTM Servo Drive DZXCANTE-040L080. It is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. It features configurable inputs/outputs, extended temperature operation from -40°C to +75°C, and compliance with various industry standards including RoHS, MIL-STD-810F and CE. It provides peak currents up to 40A and continuous currents up to 20A from a 10-80VDC supply voltage.
The document describes a digital servo drive that is designed to drive brushed and brushless motors. It operates in torque, velocity, or position mode and employs space vector modulation for higher efficiency. It has configurable inputs and outputs and is designed for extended temperature ranges and vibration. It provides motor control and interfacing with external devices over CANopen or RS-232 interfaces.
The DigiFlex® PerformanceTM Servo Drive DZCANTU-020B080 is a fully digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive supports various feedback devices and command sources, and features configurable digital and analog inputs and outputs. It has a CANopen interface for networking and USB interface for configuration.
The DigiFlex® PerformanceTM Servo Drive DZCANTE-020L080 is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive supports various command and feedback interfaces, and includes programmable digital and analog inputs/outputs. It is compliant with various safety standards and has a compact form factor making it suitable for embedded applications.
The DigiFlex® PerformanceTM Servo Drive DZCANTE-012L080 is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs, and communicates using CANopen or RS-232. It is designed for embedded applications and provides 12A peak current and 6A continuous current from a 20-80VDC supply voltage.
This high performance vector control inverter has complete control over speed and torque. It provides industry-leading control performance through highly accurate speed control, fast response times, and precise torque control. The inverter is available in a wide range of capacities to support flexible applications globally.
2301 manual (v7.0 - 80384 a) (1) gefranDarío Falquéz
This document provides installation and configuration instructions for a configurable controller with software version 7.0. It includes dimensions for panel mounting, cut-out sizes, and instructions for installing multiple instruments side by side or stacked. It also provides technical specifications for the controller's inputs, outputs, power supply, ambient conditions, control functions, alarms, weight, and includes diagrams of the front panel display and buttons. The document describes hardware configuration options for inputs, outputs, power supply, and serial communication interface.
BẢNG GIÁ THIẾT BỊ CÔNG NGHIỆP - TỰ ĐỘNG HÓA
http://haophuong.com/bang-gia-hpc/c145205.html
CTY TNHH HẠO PHƯƠNG
Nhà phân phối thiết bị điện công nghiệp và tự động hóa hàng đầu Việt Nam
Website: www.HaoPhuong.com
RT-300 Series Industrial Joysticks (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog Biến tần Frenic 5000g11 Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
This document provides information on Fuji Electric's FRENIC5000 series of inverters. It summarizes key features of the inverters including:
1) Dynamic torque-vector control which provides high starting torque, smooth acceleration/deceleration, and reduced motor wow at low speeds.
2) Protections such as electronic thermal overload protection, input phase loss protection, and motor protection with PTC thermistor.
3) Advanced functions including 16-step speed control, energy saving operation, PID control, and communications capabilities.
4) The inverters are available in G11S and P11S series for general industrial machines and fans/pumps respectively, from 1/4
Mitsubishi inverter fr-s500 catalog-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Ls catalog thiet bi tu dong i s5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Ưu điểm của AC Servo Siemens Sinamics V90
HIỆU SUẤT TỐI ƯU
Tính năng Tuning một lần và cho phép tuning theo thời gian thực giúp tối ưu hóa hiệu suất của hệ thống.
Tần số xung ngõ vào cao lên đên 1MHz.
Encoder khác nhau giúp đáp ứng các yêu cầu ứng dụng khác nhau.
DỄ SỬ DỤNG
Kết nối đơn giản với hệ thống điều khiển
Điều chỉnh dể dàng và nhân bản thông số
Vận hành dễ dàng với SINAMICS V-ASSISTANT
Tích hợp dễ dàng qua PTI, PROFINET, USS, Modbus RTU
TIẾT KIỆM CHI PHÍ
Tích hợp: Pulse train positioning, internal positioning với traversing block hoặc Modbus
Tích hợp điện trở phanh trong tất cả các kích thước khung
Tích hợp holding brake switch (Frame size 400V)
HOẠT ĐỘNG TIN CẬY
Vòng bi motor chất lượng cao
Tiêu chuẩn cấp độ bảo vệ cho tất cả các loại motor IP65
Tích hợp tính năng bảo vệ Torque Off (STO)
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
Catalog: Biến tần Frenic5000-VG7S-405C Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Mitsubishi inverter freqrol-a700 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Cataloge ge 3.control and_automation_dienhathe.com-4_14_vat300_e_c5-8_rev_bDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Cataloge ge 3.control and_automation-14_vat300_e_c5-8_rev_bDien Ha The
This document describes the analog and digital input/output functions of a drive controller. It discusses:
1) The two analog output channels can be configured for voltage or current output. Various internal data values can be assigned to the analog outputs.
2) One pulse train output channel is available and can be used to output speed or other data as a pulse frequency.
3) There are multiple options for setting speed, torque, and torque bias reference values including analog inputs, serial communication, pulse trains, and parameters. Selection of the active reference can be configured through parameters or digital inputs.
The document describes the DigiFlex® PerformanceTM Servo Drive DZXCANTE-040L080. It is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. It features configurable inputs/outputs, extended temperature operation from -40°C to +75°C, and compliance with various industry standards including RoHS, MIL-STD-810F and CE. It provides peak currents up to 40A and continuous currents up to 20A from a 10-80VDC supply voltage.
The document describes a digital servo drive that is designed to drive brushed and brushless motors. It operates in torque, velocity, or position mode and employs space vector modulation for higher efficiency. It has configurable inputs and outputs and is designed for extended temperature ranges and vibration. It provides motor control and interfacing with external devices over CANopen or RS-232 interfaces.
The DigiFlex® PerformanceTM Servo Drive DZCANTU-020B080 is a fully digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive supports various feedback devices and command sources, and features configurable digital and analog inputs and outputs. It has a CANopen interface for networking and USB interface for configuration.
The DigiFlex® PerformanceTM Servo Drive DZCANTE-020L080 is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive supports various command and feedback interfaces, and includes programmable digital and analog inputs/outputs. It is compliant with various safety standards and has a compact form factor making it suitable for embedded applications.
The DigiFlex® PerformanceTM Servo Drive DZCANTE-012L080 is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs, and communicates using CANopen or RS-232. It is designed for embedded applications and provides 12A peak current and 6A continuous current from a 20-80VDC supply voltage.
The DZRALTE-020L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs for interfacing with external devices, and it can be configured via RS-232 or RS-485 interfaces. It provides up to 20A of peak current and 12A of continuous current from a 10-80VDC supply voltage.
The document describes the DigiFlex® PerformanceTM Servo Drive DZXCANTE-008L080 digital servo drive. It is designed to drive brushed and brushless servomotors from a compact form factor suitable for embedded applications. The drive operates in torque, velocity, or position mode using Space Vector Modulation for high efficiency. It features inputs and outputs for interfacing with external devices and controllers. The drive is rated for extended temperature operation and vibration and is compliant with various industry standards.
The DigiFlex® PerformanceTM Servo Drive DZRALTE-012L080 is a digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. The drive supports a variety of command and feedback interfaces and includes programmable digital and analog inputs/outputs. It complies with relevant safety standards and has natural convection cooling in a small PCB mounted package.
The DigiFlex® PerformanceTM Servo Drive DZCANTE-010L200 is a fully digital servo drive designed to drive brushed and brushless servomotors. It operates in torque, velocity, or position mode and employs Space Vector Modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs and supports various feedback and command sources over CANopen or RS-232 interfaces.
The document describes the DigiFlex® PerformanceTM Servo Drive DZXRALTE-040L080. It is designed to drive brushed and brushless servomotors from a compact form factor suitable for embedded applications. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. It features configurable I/O, supports various feedback and command sources, and is rated for extended temperature operation from -40°C to +75°C. Commissioning and configuration is done using the DriveWare® 7 software downloaded from the manufacturer's website.
The DigiFlex® PerformanceTM Servo Drive DZRALTE-010L200 is a fully digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using Space Vector Modulation for higher efficiency. The drive features configurable inputs and outputs, RS-232 and RS-485 interfaces, and stores parameters in non-volatile memory. It is compliant with various safety and EMC standards.
The document describes the DigiFlex® PerformanceTM Servo Drive DZXRALTE-015L080. It is designed to drive brushed and brushless servomotors from a compact form factor suitable for embedded applications. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. It has configurable digital and analog inputs and outputs. It is rated for extended temperature operation and vibration.
The document describes the DigiFlex® PerformanceTM Servo Drive DZXRALTE-008L080. It is designed to drive brushed and brushless servomotors from a compact form factor suitable for embedded applications. It operates in torque, velocity, or position mode using space vector modulation for higher efficiency. It has inputs and outputs for interfacing with external devices and supports various command and feedback types. The drive is rated for extended temperature operation and vibration and meets various compliance standards including RoHS, MIL-STD-810F and CE Class A.
The DigiFlex® PerformanceTM Servo Drive DZRALTE-025L200 is a fully digital servo drive designed to drive brushed and brushless servomotors from a compact form factor. It operates in torque, velocity, or position mode using Space Vector Modulation for higher efficiency. The drive features configurable digital and analog inputs and outputs for interfacing with external devices, and it can be configured over RS-232, RS-485, or via an analog input. The drive provides 25A of peak current and 12.5A of continuous current from a 40-175VDC supply voltage.
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
The document describes the DigiFlex® PerformanceTM Servo Drive DPRALTE-015B200. It is designed to drive brushed and brushless servomotors in torque, velocity, or position mode using space vector modulation. Key features include four quadrant regenerative operation, configurable I/O, and compliance with various safety standards. It provides 15A peak current and 7.5A continuous current from a 40-190VDC supply voltage.
This document provides instructions for connecting, operating, and commissioning the VLT® AQUA Drive FC 200 series frequency converter. It describes connecting the power supply, motor, control terminals, and optional components. It also explains how to operate the graphical control unit, access commissioning menus for easy setup, and view status displays. Troubleshooting tips are provided for warning and alarm conditions. Application examples are given for common control configurations. Safety warnings are provided throughout regarding hazardous voltages present even when disconnected from mains power.
This document provides instructions for connecting, operating, and configuring the VLT AQUA Drive FC 200 series frequency converters. It describes connecting the power supply and motor terminals, as well as the control terminals. It also explains how to operate the graphical control panel, complete easy commissioning, set up the Profibus DP interface, analyze faults, and configure common application examples. The quick guide is intended for trained specialists to work with the product manuals and covers basic connection and operation up to 90 kW for asynchronous motors.
Similar to Cataloge ge 3.control and_automation_dienhathe.com-4_12_vat300_e_c4-5_rev_a (20)
This document provides a quick start guide for the FED-C Series AC drive. It includes information on safety, wiring, the operating panel, quick setup, standard parameters, troubleshooting, and revision history. The guide contains basic instructions to get started with installation and configuration of the AC drive.
Fed e-quick-start-manual-bientanfuji-dienhathe.comDien Ha The
This quick start guide provides instructions for setting up and operating an inverter. It begins with an overview of product information, including nameplate details and specifications. It then covers wiring, including diagrams for 3-phase and single-phase power supply types. Terminal functions are described for the main circuit and control circuit. The guide presents a timing diagram for the control logic and acceleration/deceleration profiles. It concludes with a step-by-step setup process, including getting familiar with the keypad, setting motor parameters, checking rotation direction, and setting function codes for features like the startup frequency and DC injection braking.
Bảng giá LS 2019 - Bảng giá mới sẽ áp dụng từ ngày 20.0.2019
Để cập nhật các bảng giá mới lĩnh vực thiết bị điện Công
Nghiệp.Quý khách vui lòng vào link bên dưới
https://www.dienhathe.com/download/bang-gia-dien-cong-nghiep/?filter_nam=2019&filter_tai-lieu=bang-gia
Mitsubishi graphic operation terminal got2000 series parts library bookDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter fr-a700-instruction-manualbasic-160425031653Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series gt2103 new product releaseDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series got mobile function quic...Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series drive control interactiv...Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcbDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series (concise)Dien Ha The
- Monitor the GOT screen from a remote location.
- Switch screens and operate touch switches.
Control:
- Monitor and operate the GOT from a remote location.
- Switch screens, operate touch switches, change settings, and more.
Number of
simultaneous
connections
1 client
Multiple clients✽1
Screen
switching
Not possible
Possible✽2
Client OS
Windows, Linux, macOS, Android, iOS
Windows, Linux, macOS, Android, iOS
Client software
- Web browser
- Viewer software
- Web browser
- VNC client software✽3
Mitsubishi low voltage ws-v series comparison of previous and new modelsDien Ha The
1. The document compares previous and new models of molded-case circuit breakers and earth-leakage circuit breakers.
2. It outlines differences in dimensions, performance, and specifications between previous W & WS series models and new WS-V series models. Key changes include changes in tripping methods, operating characteristics, dimensions, rated currents, and breaking capacities.
3. Replacement models are identified for previous models, along with any drilling dimension or front plate cutout changes between models. Some models were added or had specifications adjusted.
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage miniature circuit breakers din seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage mccb and elcb(ws-v series) y0720-version 1-mitsuDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-f700 pj seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter catalog-mitsubishi-inverter-option-160426021125Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...shadow0702a
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...amsjournal
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Cataloge ge 3.control and_automation_dienhathe.com-4_12_vat300_e_c4-5_rev_a
1. 4. Operation Panel
4-5 Changing modes
The parameters used differ according to the control mode (C30-0:f0).
The parameters include the V/f control, the IM vector control (sensor-less, with sensor) and the PM
motor control with sensor.
These parameters are divided into the block No. (mode), main No. and sub-No. for each function.
4-5-1 V/f control (C30-0 f0 = 1) mode
The configuration of the parameters is shown in Fig. 4-5-1.
4 – 27
Output frequency monitor (d00-0, 1, 4, 5)
Frequency setting monitor (d01-0, 1, 4)
Current monitor (d02-0 to 4, 7 to 9)
Voltage monitor (d03-0 to 3)
Sequence status (d04-0 to 7)
Minor fault monitor (d05-0, 1)
Pattern run monitor (d06-0, 1)
Pump operation status monitor (d07-0 to 4)
Analog input random scale display (d08-0 to 2)
Input display (d08-3 to C)
Built-in PLC monitor (d10-0 to 3)
STP run monitor (d13-0 to 5)
Extended monitor (d20-0 to 4)
Maintenance monitor (d21-0 to 3)
Automatic tuning (d22-0)
Hardware monitor (d30-0 to 5)
Mode
Monitor mode : Monitors (displays) the internal status.
Knob or
Key
(Continued on next page)
Fig. 4-5-1 (1) Parameter configuration
RST
MOD
Key
Frequency setting (A00-0, 1)
Acceleration/deceleration time (A01-0, 1)
Torque boost (A02-0 to 6)
DC Brake (A03-0, 1)
Custom parameters (A04-0 to 7)
Parameter B and C indicatory skip (A05-0 to 2)
Block-A Parameter Mode
Fault history monitor
Minor failure past record
indication
Parameter A, B and C
modification list entry
Sequence input display
(dedicated for LCD panel)
Sequence output display
(dedicated for LCD panel)
Knob or
Key
: Parameters changed frequently
during the normal usage state.
2. 4. Operation Panel
Fig. 4-5-1 (2) Parameter configuration
4 – 28
Basic function settings
Output rating (B00-0 to 7)
Motor circuit constant (IM) (B02-0, 1, 4, 5)
Frequency skip (B05-0 to 5)
Gearing comparative setting (B06-0, 1, 3, 4, 6, 7, 9, A, C, D)
Upper/Lower limit setting (B07-0, 1)
Extended function settings
: Parameters changed infrequently during the normal usage
state
(Continued on next page)
Acceleration/deceleration time setting (B10-0 to 6)
Program frequency (speed) setting (B11-0 to 8)
Automatic braking on power failure setting (B12-0 to 6)
V/f middle point setting (B17-0 to B)
Current limit (B18-0 to 8)
Automatic tuning function (B19-0 to 2)
Auxiliary drive 0 exclusive setting (B20-0 to B23-4)
Auxiliary drive 1 exclusive setting (B24-0 to B27-4)
Auxiliary drive 2 exclusive setting (B28-0 to B2B-4)
Auxiliary drive 3 exclusive setting (B2C-0 to B2F-4)
Speed control extended function (B30-4)
Software option function settings
Software option function (B40-0)
Program ramp – acceleration (B41-0 to 7)
Program ramp – deceleration (B42-0 to 7)
PID control (B43-0 to A)
Multi-pump control (B44-0 to 6)
Traverse run (B45-0 to 6)
External brake control (B46-0 to 5)
Simple ASR control (B47-0 to 6)
Pattern run (B50-0 to B59-3)
Spinning frame operation (B60-0 to B76-6)
Block-B Parameter Mode
Knob or
Key
RST
MOD
Key
3. 4. Operation Panel
(Note) At the default setting, only the basic functions are displayed. The extended function, software
option function, hardware option function parameters are skipped.
Thus, to change these parameters, change parameter A05-0 to 2 (parameter B, C block skip
setting), so that the target parameters are displayed.
Fig. 4-5-1 (3) Parameter configuration
4 – 29
Start interlock (C20-0 to 3)
Retry/pick-up (C21-0 to 4)
Overload (C22-0 to 7)
Speed detection error monitor (C24-1 to 3)
High-efficiency operation (C25-0 to 2)
Standard serial (C26-0 to 7)
Password No. (C28-0, 1)
Basic function settings
Control methods (C00-0 to 7)
Start/stop frequency (C01-0, 1)
Various setting input selection (C02-0, 1)
Sequence input terminal function – 1 (C03-0 to F)
Sequence input terminal function – 2 (C04-0 to F)
Sequence input terminal function – 3 (C05-0 to F)
Analog input terminal function (C07-0 to 5)
Automatic start setting (C08-0)
Parameter protection/operation locks (C09-0 to 4, 6, 7)
Custom parameter register (C10-0 to 7)
Operation panel mode setting (C11-0 to 7)
Setting input terminal function (C12-0 to F)
Output terminal function (C13-0 to F)
Meter output gain (C14-0 to B)
Status output detection level (C15-0 to E)
: Parameters changed infrequently during the normal usage
state
Block-C Parameter Mode
Hardware option function setting
Control mode selection (C30-0)
Main circuit option selection (C31-0 to 3)
PC (parallel) interface (future) (C32-0 to 2)
Sequence output terminal function (C33-0 to 3)
Field network interface (C34-0 to 7)
Encoder setting 1 (C50-0 to 3)
Extended function setting
Parameter Control (U00-0)
Password No. setting (U00-1)
Built-in PLC setting (U10-0 to U67-7)
Knob or
Key
RST
MOD
Key
Utility mode U
4. 4. Operation Panel
4-5-2 IM speed sensor-less vector control (C30-0 f0 = 2),
IM vector control with speed sensor (C30-0 f0 = 3)
The configuration of the parameters is shown in Fig. 4-5-2.
Fig. 4-5-2 (1) Parameter configuration
4 – 30
Output frequency monitor (d00-0 to 5)
Frequency setting monitor (d01-2 to 4)
Current monitor (d02-0 to 9)
Voltage monitor (d03-0 to 3)
Sequence status (d04-0 to 7)
Minor fault monitor (d05-0, 1)
Pattern run monitor (d06-0, 1)
Analog input random scale display (d08-0 to 2)
Input display (d08-3 to C)
Built-in PLC monitor (d10-0 to 3)
Torque setting monitor (d11-0 to 5)
Slip (d12-0)
Automatic torque bias (d14-0)
Extended monitor (d20-0 to 4)
Maintenance monitor (d21-0 to 3)
Automatic tuning (d22-0)
Hardware monitor (d30-0 to 5)
Mode
Monitor mode : Monitors (displays) the internal status.
: Parameters changed frequently during the normal
usage state.
Frequency setting (A00-2 to 3)
Acceleration/deceleration time (A01-0, 1)
DC Brake (A03-1 to 2)
Custom parameters (A04-0 to 7)
Parameter B and C indicatory skip (A05-0 to 2)
ASR control constant (A10-0 to 5)
ACR control constant (A11-0 to 3)
Knob or
Key
Knob or
Key
RST
MOD
Key
Block-A Parameter Mode
Fault history monitor
Minor failure past record
indication
Parameter A, B and C
modification list entry
Sequence input display
(dedicated for LCD panel)
Sequence output display
(dedicated for LCD panel)
(Continued on next page)
5. 4. Operation Panel
Fig. 4-5-2 (2) Parameter configuration
4 – 31
Output rating (B01-0 to 9)
Motor circuit constant (IM) (B02-0 to 9)
Gearing comparative setting (B06-0, 2, 3, 5, 6, 8, 9, B, C, E)
Upper/Lower limit setting (B07-2, 3)
Basic function settings
Software option function settings
Software option function (B40-0)
Program ramp – acceleration (B41-0 to 7)
Program ramp – deceleration (B42-0 to 7)
PID control (B43-0 to A)
Traverse run (B45-0 to 6)
External brake control (B46-0 to 5)
Pattern run (B50-0 to B59-3)
Extended function setting
Acceleration/deceleration time setting (B10-0 to 6)
Program frequency (speed) setting (B11-0 to 8)
Automatic braking on power failure setting (B12-0, 1)
Local setting (B13-0 to 9)
ASR dead band setting (B14-0)
Machine time constant setting 2 (B15-0)
Automatic torque bias setting (B16-0 to B)
Current limit (B18-0 to 8)
Automatic tuning function (B19-0 to 2)
Auxiliary drive 0 exclusive setting (B20-0 to B23-4)
Auxiliary drive 1 exclusive setting (B24-0 to B27-4)
Auxiliary drive 2 exclusive setting (B28-0 to B2B-4)
Auxiliary drive 3 exclusive setting (B2C-0 to B2F-4)
Speed control extended function (B30-0 to 8)
Sensor-less control function (B31-0 to 6)
Vector control compensation selection (B32-0 to 4)
M fluctuation compensation table reference speed (B33-0 to 7)
M fluctuation compensation (B34-0 to 7)
: Parameters changed infrequently during the normal
usage state
(Continued on next page)
Knob or
Key
RST
MOD
Key
Block-B Parameter Mode
6. 4. Operation Panel
(Note) At the default setting, only the basic functions are displayed. The extended function, software
option function, hardware option function parameters are skipped.
Thus, to change these parameters, change parameter A05-0 to 2 (parameter B, C block skip
setting), so that the target parameters are displayed.
Fig. 4-5-2 (3) Parameter configuration
4 – 32
Basic function settings
Control methods (C00-0 to 7)
Various setting input selection (C02-0 to 8)
Sequence input terminal function – 1 (C03-0 to F)
Sequence input terminal function – 2 (C04-0 to F)
Sequence input terminal function – 3 (C05-0 to F)
Sequence input terminal function – 4 (C06-0 to A)
Analog input terminal function (C07-0 to A)
Automatic start setting (C08-0)
Parameter protection/operation locks (C09-0 to 7)
Custom parameter register (C10-0 to 7)
Operation panel mode setting (C11-0 to 7)
Setting input terminal function (C12-0 to F)
Output terminal function (C13-0 to F)
Meter output gain (C14-0 to B)
Status output detection level (C15-0 to E)
: Parameters changed infrequently during the normal
usage state
Block-C Parameter Mode
Hardware option function settings
Control mode selection (C30-0)
Main circuit option selection (C31-0 to 3)
PC (parallel) interface (future) (C32-0 to 2)
Sequence output terminal function (C33-0 to 3)
Field network interface (C34-0 to 7)
Encoder setting (C50-0 to 3)
Start interlock (C20-0 to 3)
Retry/pick-up (C21-0 to 3, 5 to 7)
Overload (C22-0 to 7)
Speed detection error monitor (C24-0 to 7)
High-efficiency operation (C25-0 to 2)
Standard serial (C26-0 to 7)
Password No. (C28-0, 1)
Extend function settings
Parameter Control (U00-0)
Password No. setting (U00-1)
Built-in PLC setting (U10-0 to U67-7)
Utility mode U
Knob or
Key
RST
MOD
Key
7. 4. Operation Panel
4-5-3 PM motor control mode with sensor (C30-0 f0 = 4)
The configuration of the parameters is shown in Fig. 4-5-3.
4 – 33
Output frequency monitor (d00-0 to 5)
Frequency setting monitor (d01-2 to 4)
Current monitor (d02-0 to 9)
Voltage monitor (d03-0 to 3)
Sequence status (d04-0 to 7)
Minor fault monitor (d05-0, 1)
Pattern run monitor (d06-0, 1)
Analog input random scale display (d08-0 to 2)
Input display (d08-3 to C)
Built-in PLC monitor (d10-0 to 3)
Torque setting monitor (d11-0 to 5)
Automatic torque bias (d14-0)
Electric angle monitor (d15-0)
Magnetic pole position estimation monitor(d16-0 to 3)
Extended monitor (d20-0 to 4)
Maintenance monitor (d21-0 to 3)
Hardware monitor (d30-0 to 5)
: Monitors (displays) the internal status.
(Continued on next page)
: Parameters changed frequently during the normal
usage state.
Frequency setting (A00-2, 3)
Acceleration/deceleration time (A01-0, 1)
DC Brake (A03-1, 2)
Custom parameters (A04-0 to 7)
Parameter B and C indicatory skip (A05-0 to 2)
ASR control constant (A10-0 to 5)
ACR control constant (A11-2, 3)
ACR control constant (PM motor) (A20-0 to 3)
Fig. 4-5-3 (1) Parameter configuration
Knob or
Key
Block-A Parameter Mode
Knob or
Key
RST
MOD
Key
Mode
Monitor mode
Fault history monitor
Minor failure past record
indication
Parameter A, B and C
modification list entry
Sequence input display
(dedicated for LCD panel)
Sequence output display
(dedicated for LCD panel)
8. 4. Operation Panel
Fig. 4-5-3 (2) Parameter configuration
4 – 34
Basic function settings
Software option function settings
Software option function (B40-0)
Program ramp – acceleration (B41-0 to 7)
Program ramp – deceleration (B42-0 to 7)
PID control (B43-0 to A)
Traverse run (B45-0 to 6)
External brake control (B46-0 to 5)
Pattern run (B50-0 to B59-3)
Extended function setting
Acceleration/deceleration time setting (B10-0 to 6)
Program frequency (speed) setting (B11-0 to 8)
Automatic braking on power failure setting (B12-0, 1)
Local setting (B13-0 to 9)
ASR dead band setting (B14-0)
Machine time constant setting 2 (B15-0)
Automatic torque bias setting (B16-0 to B)
Current limit (B18-0 to 8)
Automatic tuning function (B19-0)
Auxiliary drive 0 exclusive setting (B20-0 to B23-4)
Auxiliary drive 1 exclusive setting (B24-0 to B27-4)
Auxiliary drive 2 exclusive setting (B28-0 to B2B-4)
Auxiliary drive 3 exclusive setting (B2C-0 to B2F-4)
Speed control extended function (B30-0 to 8)
Vector control compensation selection (B32-4 to 6)
Voltage saturation prevention control constant (B35-0 to 4)
Field weakening electric current table (B36-0 to 6)
Torque to Iq conversion adjustment coefficient table (B38-0 to 6)
Pole position presumption (B39-0 to 5)
: Parameters changed infrequently during the normal
usage state
Block-B Parameter Mode
(Continued on next page)
Output rating (B01-0 to 9)
Motor circuit constant (PM) (B03-0 to 5)
Gearing comparative setting (B06-0, 2, 3, 5, 6, 8, 9, B, C, E)
Upper/Lower limit setting (B07-2, 3)Knob or
Key
RST
MOD
Key
9. 4. Operation Panel
(Note) At the default setting, only the basic functions are displayed. The extended function, software
option function, hardware option function parameters are skipped.
Thus, to change these parameters, change parameter A05-0 to 2 (parameter B, C block skip
setting), so that the target parameters are displayed.
Fig. 4-5-3 (3) Parameter configuration
4 – 35
Control methods (C00-0 to 7)
Various setting input selection (C02-0 to 8)
Sequence input terminal function – 1 (C03-0 to F)
Sequence input terminal function – 2 (C04-0 to F)
Sequence input terminal function – 3 (C05-0 to F)
Sequence input terminal function – 4 (C06-1 to A)
Analog input terminal function (C07-0 to A)
Automatic start setting (C08-0)
Parameter protection/operation locks (C09-0 to 7)
Custom parameter register (C10-0 to 7)
Operation panel mode setting (C11-0 to 7)
Setting input terminal function (C12-0 to F)
Output terminal function (C13-0 to F)
Meter output gain (C14-0 to B)
Status output detection level (C15-0 to E)
Start interlock (C20-0 to 3)
Retry/pick-up (C21-0 to 3)
Overload (C22-0 to 7)
Speed detection error monitor (C24-0 to 2, 4 to 7)
High-efficiency operation (C25-0 to 2)
Standard serial transmission setting (C26-0 to 7)
Password No. (C28-0, 1)
Basic function settings
: Parameters changed infrequently during the normal
usage state
Block-C Parameter Mode
Hardware option function settings
Control mode selection (C30-0)
Main circuit option selection (C31-0 to 3)
PC (parallel) interface (future) (C32-0 to 2)
Sequence output terminal function (C33-0 to 3)
Field network interface (C34-0 to 7)
Encoder setting (C50-0, 2, 3)
Encoder setting (PM motor) (C51-0 to 9)
Extend function settings
Parameter Control (U00-0)
Password No. setting (U00-1)
Built-in PLC setting (U10-0 to U67-7)
Knob or
Key
RST
MOD
Key
Utility mode U
10. 4. Operation Panel
(Note) At the default setting, only the basic functions are displayed. The extended function, software
option function, hardware option function parameters are skipped.
Thus, to change these parameters, change parameter A05-0 to 2 (parameter B, C block skip
setting), so that the target parameters are displayed.
Fig. 4-5-3 (3) Parameter configuration
4 – 35
Control methods (C00-0 to 7)
Various setting input selection (C02-0 to 8)
Sequence input terminal function – 1 (C03-0 to F)
Sequence input terminal function – 2 (C04-0 to F)
Sequence input terminal function – 3 (C05-0 to F)
Sequence input terminal function – 4 (C06-1 to A)
Analog input terminal function (C07-0 to A)
Automatic start setting (C08-0)
Parameter protection/operation locks (C09-0 to 7)
Custom parameter register (C10-0 to 7)
Operation panel mode setting (C11-0 to 7)
Setting input terminal function (C12-0 to F)
Output terminal function (C13-0 to F)
Meter output gain (C14-0 to B)
Status output detection level (C15-0 to E)
Start interlock (C20-0 to 3)
Retry/pick-up (C21-0 to 3)
Overload (C22-0 to 7)
Speed detection error monitor (C24-0 to 2, 4 to 7)
High-efficiency operation (C25-0 to 2)
Standard serial transmission setting (C26-0 to 7)
Password No. (C28-0, 1)
Basic function settings
: Parameters changed infrequently during the normal
usage state
Block-C Parameter Mode
Hardware option function settings
Control mode selection (C30-0)
Main circuit option selection (C31-0 to 3)
PC (parallel) interface (future) (C32-0 to 2)
Sequence output terminal function (C33-0 to 3)
Field network interface (C34-0 to 7)
Encoder setting (C50-0, 2, 3)
Encoder setting (PM motor) (C51-0 to 9)
Extend function settings
Parameter Control (U00-0)
Password No. setting (U00-1)
Built-in PLC setting (U10-0 to U67-7)
Knob or
Key
RST
MOD
Key
Utility mode U