- The document discusses the effects of including a below-storey podium structure on a 40-storey building, including increased stiffness and the "backstay effect".
- A podium structure at the base increases the overall stiffness of the building and helps resist lateral loads through load transfer between floors. This is called the "backstay effect".
- The study models and analyzes buildings with and without podium structures to compare their lateral displacement, base shear, time period, storey drift, and degree of shear reversal. Sensitivity analysis is also conducted based on IS 16700 standards.
- The results provide insight into how the inclusion of a podium structure and its height/surface area impact the structural behavior and
Seismic performance of r c buildings on sloping grounds with different types ...eSAT Journals
Abstract
Structure are highly susceptible to serve damages in earthquake scenario, so choosing an appropriate lateral force resisting
bracing systems will have a significant effect on performance of the structure. So this present study is aimed at evaluating and
comparing various types of eccentric steel bracings for 12 storey RC frame building resisting on sloping ground configurations.
For this 5 types of bracing systems like X-Bracing, Diagonal bracing, K- bracing, V-bracing and inverted V bracing are
considered on the outer periphery of the buildings with step back and set back – step back type configurations are modeled and
analyzed. The models are compared for different aspects within the structure, such as the maximum storey displacement, base
shear, storey drift and storey shear, the structure is analyzed for seismic zone V and medium soil condition as per IS 1893:2002
using ETABS software. Results conclude that on sloping ground due to irregularity on ground surface, the structures are more
vulnerable to earthquakes. Hence use of eccentric steel bracing is an effective and economical way to resist earthquake forces,
Inverted V type bracing performs well compared to other bracing types. By using inverted V type bracing in step back buildings
types maximum storey displacement of 70% and storey drift of 66% are obtained. Similarly for setback – step back configuration
maximum storey displacement of 74% and storey drift of 70% are obtained respectively.
Keywords: X-Bracing, Diagonal Bracing, K- Bracing, V-Bracing and Inverted V Bracing
Review on seismic performance of multi storied rc building with soft storeyeSAT Journals
Abstract Soft storey is a storey in which the stiffness is less than 70% of the storey above or less than 80% of the combined stiffness of three storeys above. In a multi-storied building, soft storey is adopted to accommodate parking which is an unavoidable feature. This open ground storey is vulnerable to collapse during earthquake. Soft storey in a building causes stiffness irregularity in a structure. Due to this the structures undergoes unequal storey drift, formation of plastic hinges and finally collapse. The presence of infill wall improves the performance of building under the lateral forces. This paper deals with the study of literature of previous researches. These researches focus on the combination of measures adopted on the structure to reduce the effect of soft storey through static and dynamic analysis. The parameters studied in these researches are storey drift, axial and shear forces bending moment, displacement, time period, base shear. Also, it focuses on the equivalent strut approach to consider the effect of infill wall on the performance on building. From these researches, the interest arises to perform static and dynamic analysis to reduce the stiffness irregularity which is the main reason behind the poor performance of the building with soft storey. Keywords: Soft storey, Stiffness, Storey drift, Lateral Displacement, Infill wall
Descriptive study of pushover analysis in rcc structures of rigid jointYousuf Dinar
ABSTRACT: Structures in mega cities, are under serious threat because of faulty and unskilled design and construction of structures. Sometimes structure designers are more concerned in constructing different load resistant members without knowing its necessity and its performance in the structure. Different configuration of construction may also lead to significant variation in capacity of the same structure. Nonlinear static pushover analysis provides a better view on the performance of the structures during seismic events. This comprehensive research evaluates as well as compares the performances of bare, different infill percentage level, different configuration of soft storey and Shear wall consisting building structures with each other and later depending upon the findings, suggests from which level of performance shear wall should be preferred over the infill structure and will eventually help engineers to decide where generally the soft storey could be constructed in the structures. Above all a better of effects of pushover analysis could be summarized from the findings. Masonry walls are represented by equivalent strut according to pushover concerned codes. For different loading conditions, the performances of structures are evaluated with the help of performance point, base shear, top displacement, storey drift and stages of number of hinges form.
Seismic performance of r c buildings on sloping grounds with different types ...eSAT Journals
Abstract
Structure are highly susceptible to serve damages in earthquake scenario, so choosing an appropriate lateral force resisting
bracing systems will have a significant effect on performance of the structure. So this present study is aimed at evaluating and
comparing various types of eccentric steel bracings for 12 storey RC frame building resisting on sloping ground configurations.
For this 5 types of bracing systems like X-Bracing, Diagonal bracing, K- bracing, V-bracing and inverted V bracing are
considered on the outer periphery of the buildings with step back and set back – step back type configurations are modeled and
analyzed. The models are compared for different aspects within the structure, such as the maximum storey displacement, base
shear, storey drift and storey shear, the structure is analyzed for seismic zone V and medium soil condition as per IS 1893:2002
using ETABS software. Results conclude that on sloping ground due to irregularity on ground surface, the structures are more
vulnerable to earthquakes. Hence use of eccentric steel bracing is an effective and economical way to resist earthquake forces,
Inverted V type bracing performs well compared to other bracing types. By using inverted V type bracing in step back buildings
types maximum storey displacement of 70% and storey drift of 66% are obtained. Similarly for setback – step back configuration
maximum storey displacement of 74% and storey drift of 70% are obtained respectively.
Keywords: X-Bracing, Diagonal Bracing, K- Bracing, V-Bracing and Inverted V Bracing
Review on seismic performance of multi storied rc building with soft storeyeSAT Journals
Abstract Soft storey is a storey in which the stiffness is less than 70% of the storey above or less than 80% of the combined stiffness of three storeys above. In a multi-storied building, soft storey is adopted to accommodate parking which is an unavoidable feature. This open ground storey is vulnerable to collapse during earthquake. Soft storey in a building causes stiffness irregularity in a structure. Due to this the structures undergoes unequal storey drift, formation of plastic hinges and finally collapse. The presence of infill wall improves the performance of building under the lateral forces. This paper deals with the study of literature of previous researches. These researches focus on the combination of measures adopted on the structure to reduce the effect of soft storey through static and dynamic analysis. The parameters studied in these researches are storey drift, axial and shear forces bending moment, displacement, time period, base shear. Also, it focuses on the equivalent strut approach to consider the effect of infill wall on the performance on building. From these researches, the interest arises to perform static and dynamic analysis to reduce the stiffness irregularity which is the main reason behind the poor performance of the building with soft storey. Keywords: Soft storey, Stiffness, Storey drift, Lateral Displacement, Infill wall
Descriptive study of pushover analysis in rcc structures of rigid jointYousuf Dinar
ABSTRACT: Structures in mega cities, are under serious threat because of faulty and unskilled design and construction of structures. Sometimes structure designers are more concerned in constructing different load resistant members without knowing its necessity and its performance in the structure. Different configuration of construction may also lead to significant variation in capacity of the same structure. Nonlinear static pushover analysis provides a better view on the performance of the structures during seismic events. This comprehensive research evaluates as well as compares the performances of bare, different infill percentage level, different configuration of soft storey and Shear wall consisting building structures with each other and later depending upon the findings, suggests from which level of performance shear wall should be preferred over the infill structure and will eventually help engineers to decide where generally the soft storey could be constructed in the structures. Above all a better of effects of pushover analysis could be summarized from the findings. Masonry walls are represented by equivalent strut according to pushover concerned codes. For different loading conditions, the performances of structures are evaluated with the help of performance point, base shear, top displacement, storey drift and stages of number of hinges form.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.