아보패널PC, Gladius G1056는 10.4인치 AMD G-T56N 견고한 산업용 패널PC 입니다.
ARBOR 산업용PC는 고성능 / 저전력 플랫폼으로 패널PC의 수명을 연장할 수 있습니다.
SYSTEM
CPU : AMD G-Series APU G-T56N dual-core 1.65GHz
Graphics Controller : AMD Radeon HD 6320
Memory : 4GB DDR3 SO-DIMM memory module installed
Chipset : AMD Platform Control Hub A50M
BIOS : AMI Aptio® UEFI BIOS
Audio :
1 x microphone
2 x 2W speakers
1 x Earphone jack
Storage 1 x 32GB 1.8" SATA SSD installed
PERIPHERALS AND DEVICES
Camera :
1 x 5.0 MP front-facing AF CMOS camera (optional)
1 x 5.0 MP rear AF CMOS camera
RFID & NFC : 1 x 13.56MHz, ISO 15693/14443A/ 14443B, RFID & NFC Reader (distance: 3~5cm; speed: 5 cards/sec) (optional)
WLAN & Bluetooth : 1 x WLAN 802.11 a/b/g/n & Bluetooth 2.1 + EDR
WWAN : HSUPA / HSPA+/ LTE for WWAN (optional)
I/O INTERFACE
USB Port : 4 x USB 2.0 ports
Serial Port : 1 x RS-232 port (optional)
Ethernet : 1 X RJ45 GbE LAN
Docking Port : 1 x 35-pin pogo connector for docking connection
Video Port : 1 x VGA; 1 x mini DisplayPort
BUTTON & INDICATOR
Function Key : 1 x 5-way function key
Power Button : 1 x Power on/off button
LED : 4 x LEDs (Power, Battery Status, WLAN/RFID, Bluetooth)
TOUCH SCREEN
Type : Analog Resistive
Controller Interface : USB Interface
Digitizer : Electromagnetic digitizer with battery-free pen
LCD DISPLAY
Size/Type : 10.4" AFFS+ TFT Active Matrix Panel
Max. Resolution : 1024 (H) x 768 (V)
Luminance : 340 cd/m²
Contrast Ratio : 600:1
View Angle (U/D/R/L) : 89°/89°/89°/89°
Backlight Type : LED
POWER SUPPLY
Adapter Input : 100 ~ 240VAC (Full Range)
Adapter Output : 19VDC, 4.74A, 90W
Battery Type : Li-battery pack
Battery Capacity : 2 x 2500mAh 4-cell external battery pack
Battery Life : Up to 6 hours (depends on configuration and use)
MECHANICAL & ENVIRONMENTAL
Operating Temp. : -20 ~ 45ºC (-4 ~ 113ºF)
Storage Temp. : -20 ~ 60ºC (-4 ~ 140ºF)
Discharging Temp. : -20 ~ 40ºC (-4 ~ 104ºF)
Charging Temp. : 0 ~ 40ºC (32 ~ 104ºF)
Operating Humidity : 10 ~ 95% @ 45ºC (non-condensing)
Dimensions (W x H x D) : 266.8 x 257.7 x 67.7 mm (10.5" x 10.1" x 2.7")
Gross Weight : 1.8 kg (3.9 lb)
Vibration : 3 Grms/ 5 ~ 500Hz/ random operation
Shock : 40G peak acceleration (11 ms duration)
Transit Drop : 3ft. (90cm), except the front side
IP Rating : IP54 (Front panel only)
Regulatory : CE/FCC Class B, VCCI certified
OS SUPPORT
Windows XP Embedded / Windows XP Professional
Windows Embedded 7 / Windows 7 Professional
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Mitsubishi graphic operation terminal got2000 series quick start guide dienha...Dien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Mitsubishi graphic operation terminal got2000 series quick start guide dienha...Dien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Dieses Handbuch beschreibt die Konfiguration der Loadbalancer.org Geräte für den Einsatz mit VMware Horizon View. Es enthält Informationen über zu lastverteilende Ports / Dienste, Topology Überlegungen für die verschiedenen VMware Horizon View Server und zeigt Schritte auf, wie man die Geräte bzw. Appliances am besten konfiguriert. Für eine Einführung zum Einrichten der Appliances sowie weitere technische Informationen lesen Sie bitte auch unsere Schnellstart-Guides und großen Administrationshandbücher, die auf unserer Website verfügbar sind.
Dieses Handbuch beschreibt die Konfiguration der Loadbalancer.org Geräte für den Einsatz mit VMware Horizon View. Es enthält Informationen über zu lastverteilende Ports / Dienste, Topology Überlegungen für die verschiedenen VMware Horizon View Server und zeigt Schritte auf, wie man die Geräte bzw. Appliances am besten konfiguriert. Für eine Einführung zum Einrichten der Appliances sowie weitere technische Informationen lesen Sie bitte auch unsere Schnellstart-Guides und großen Administrationshandbücher, die auf unserer Website verfügbar sind.
아보PDA ARBOR Gladius5 2D 5.5인치 안드로이드 산업용PDA 바코드PDA 매뉴얼HION IT
아보 Gladius 5 산업용 PDA는 쿼드-코어 프로세서가 내장된 5.5인치 핸드헬드 바코드 PDA 입니다.
다양한 산업 분야에 적합
의료, 필드, 차량관리, 물류, 공장, 창고업과 같은 어려운 환경에서 음성 및 데이터를 처리할 수있는 견고한 장치가 필요한 외근 작업자에게 적합합니다.
고성능 및 저전력 소모
MTK 쿼드-코어 CPU 및 안드로이드 ™ 운영체제에 기반한 Gladius 5 산업용 PDA는 가장 인기있는 안드로이드와 함께 제공됩니다.
Rock Solid Field
아보 Gladius 5 바코드 PDA는 매우 강력한 Corning® Gorilla® 유리를 사용하여 5.5 인치 대형 스크린 크기의 1280 x 720 픽셀 HD 해상도를 제공합니다.
실드형 디자인은 습도, 진동, 낙하 및 극심한 온도에도 견딜 수있는 엄격한 MIL-STD-810G 및 IP65 표준을 준수하고 먼지와 물을 차단합니다.
Fully rugged for warehousing / transportation / medical / mPOS applications
MIL-STD-810G & IP-65 certified, 1.5m (5ft.) drop resistance
5.5” TFT color LCD 1280 x 720 HD resolution
Projected capacitive multi-touch panel with anti-reflection Corning® Gorilla® Glass 3
High mobility with multiple connectivities including WLAN, Bluetooth and WWAN
Built-in 1D barcode reader or 2D barcode imager
Customer replaceable battery with optimized battery life up to 8 hours
Wireless charge supported
G-sensor, gyroscope, light sensor, E-compass, GPS navigation & barometer
System access control via RFID & NFC reader
DURABILITY FEATURES
MIL-STD-810G & IP-65 certified
1.5m (5ft.) drop-resistance
Raised bezel for LCD impact protection
I/O ports with hinged rubber covers
SYSTEM
CPU : MTK MT6589 Quad-core Cortex™A7 1GHz CPU PowerVR™ Series5XT GPU
OS : Android™ v4.2
Memory : 1GB
Storage : 8GB
Audio : Integrated microphone, Integrated speaker, 1 x 3.5mm stereo headphone jack
PERIPHERALS AND DEVICES
Camera :
Front : 2.0 MP camera (only available for model with 1D barcode reader)
Rear: 8.0 MP AF camera with LED
Sensor :
Accelerometer (G-sensor)
3-axis digital gyroscope
Barometer
Light Sensor : Ambient light sensor
NFC : ISO/IEC 21481 Type A, Type B, Felica
WLAN : Integrated IEEE 802.11 b/g/n
Bluetooth : Integrated Bluetooth 4.0 + EDR class 2, with HID input, A2DP, DUN, HFP, SPP & PBAP supported
WWAN : WCDMA UMTS 850/1900/2100
Navigation : GPS, AGPS & digital compass
Barcode Scanner : 1D or 2D barcode scanner, either with physical trigger button
I/O INTERFACE
USB Port : 1 x Micro USB 2.0 port
SD Slot : 1 x microSD card slot (up to 32G)
SIM Socket : 2 x SIM card slots
Expansion : microSDHC
LED DISPLAY
Size/Type : 5.5” TFT LCD
Resolution : 1280 x 720
TOUCH SCREEN
Type : 5-point Projected Capacitive Touch screen Corning® Gorilla® Glass 3 w/ anti-reflection coating
MECHANICAL & ENVIRONMENTAL
Operating Temp. : -10°C ~ 50°C (14°F ~ 122°F )
Storage Temp. : -20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity : 95% (non-condensing)
Dimensions (W x H x D) : 84.0 x 175.6 x 15.9 mm (3.31” x 6.91” x 0.63”)
Weight : 280g (0.62lb) (with battery)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Learn about the Program Directory For CBPDO Installation and ServerPac Reference z/OS.This Program Directory addresses the installation of z/OS Version 1 release 13, which is also referred to as z/OS V1.13.0. This Program Directory is intended for the system programmer who is responsible for installing the z/OS Version 1 Release 13 elements using the CBPDO delivery option. If you are installing z/OS V1.13.0 with ServerPac, use the book ServerPac: Installing Your Order, which is shipped with your ServerPac to install z/OS. That book might refer to specific sections of this Program Directory for information that applies to the ServerPac installation path. For more information on IBM System z, visit http://ibm.co/PNo9Cb.
Visit http://on.fb.me/LT4gdu to 'Like' the official Facebook page of IBM India Smarter Computing.
Siemens,
Catalog Thiết Bị Điện Siemens, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Siemens,
Catalog Thiết Bị Tự Động Siemens, Catalog Thiết Bị Tự Động
Catalog Phụ Kiện Siemens, Catalog Phụ Kiện,
Catalog Siemens, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Learn about Program Directory for IBM Ported Tools for z/OS. This program directory is intended for the system programmers who are responsible for program
installation and maintenance. It contains information about the material and procedures associated with
the installation of IBM Ported Tools for z/OS. For more information on IBM System z, visit http://ibm.co/PNo9Cb.
Visit the official Scribd Channel of IBM India Smarter Computing at http://bit.ly/VwO86R to get access to more documents.
아보태블릿PC ARBOR Gladius8 2D 7.85인치 안드로이드 태블릿PC 매뉴얼HION IT
아보, Gladius 8은 쿼드코어 프로세서가 내장된 7.85 인치 견고한 핸드헬드 태블릿 PC로 의료산업, 소매업, 물류 및 창고관리 등 광범위한 산업분야에 적합한 아보의 걸작품입니다.
O/S 는 안드로이드 4.4.2 Kitkat 및 MTK 쿼드코어 CPU로 구동되는 아보 Gladius 8 태블릿 PC는 고속 보안 및 광대역 무선 연결 기능을 제공하므로 실시간 통신할 수 있고, 베터리 수명도 최대 8시간까지 사용할 수 있습니다.
초박형 1D / 2D 바코드 스캐너와 실시간 시스템이 내장 된 Gladius 8은 모바일 작업자가 더 빠르고, 더 똑똑하게 작업 할 수 있도록 해줍니다. 게다가 Gladius 8은 바코드 스캐너를 하나의 단일 장치로 통합하여 작업자의 생산성을 높이고 비즈니스 프로세스를 간소화합니다
전체 7.85 인치 (4 : 3 화면비율)의 Gladius 8은 인체 공학적 설계로 조작이 쉬우며 고객의 응용환경을 충분히 고려하여 화면 표시를 실외 시각화 할 수 있습니다. Gladius 8은 소비자용 타블렛보다 내구성이 뛰어난 솔루션을 제공 할뿐만 아니라 어떠한 혹독한 환경에서도 견딜 수 있습니다.
Fully rugged for warehousing / transportation / medical / mPOS applications
MIL-STD-810G & IP-65 certified, 1.2m (4ft.) drop resistance
7.85” TFT color LCD 1024 x 768 XGA resolution
Projected capacitive multi-touch panel with anti-reflection Corning® Gorilla® Glass 3
High mobility with multiple connectivities including WLAN, Bluetooth and WWAN
Built-in 1D/2D barcode scanner
Customer replaceable battery with optimized battery life up to 10 hours
Wireless charge supported
G-sensor, gyroscope, light sensor, E-compass, GPS navigation & barometer
System access control via RFID & NFC reader
DURABILITY FEATURES
MIL-STD-810G & IP-65 certified
1.2m (4ft.) drop-resistance
Raised bezel for LCD impact protection
I/O ports with hinged rubber covers
SYSTEM
CPU : MTK MT8382 Quad-core Cortex™A7 1.3GHz CPU PowerVR™ Series5XT GPU
OS : Android™ v4.4
Memory : 1GB
Storage : 8GB
Audio : Integrated microphone, Integrated speaker, 1 x 3.5mm stereo headphone jack
PERIPHERALS AND DEVICES
Camera :
Front : 2.0 MP camera
Rear: 12 MP AF camera with LED
Sensor :
Accelerometer (G-sensor)
3-axis digital gyroscope
Barometer
Light Sensor : Ambient light sensor
RFID & NFC : 1 x 13.56MHz, ISO 15693/14443A/ 14443B RFID & ISO/IEC 21481 Type A, Type B, Felica NFC Reader
WLAN : Integrated IEEE 802.11 b/g/n, Wi-Fi certified Miracast™
Bluetooth : Integrated Bluetooth 4.0 LE + EDR class 2, with HID input, A2DP, DUN, HFP, SPP & PBAP supported
WWAN : WCDMA UMTS 850/1900/2100
Navigation : GPS, AGPS & digital compass
Barcode Scanner : 1D/2D barcode scanner with physical trigger button
I/O INTERFACE
USB Port : 1 x Micro USB 2.0 port
SD Slot : 1 x microSD/SDHC card slot (up to 32G)
SIM Socket : 2 x SIM card slots
HDMI : 1 x Mini HDMI port
LED DISPLAY
Size/Type : 7.85” TFT LCD
Resolution : 1024 x 768
TOUCH SCREEN
Type : 5-point Projected Capacitive Touch screen Corning® Gorilla® Glass 3 coating w/ anti-reflection coating
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Yokogawa Model GX10/GX20/GP10/GP20 Paperless Recorder First Step GuidePower Specialties, Inc.
The GP series is an industry-first multi-point touch panel, to improve intuitive and smart operator control. Users can scroll, pan, zoom historical data, and even write freehand messages on its dust-proof and water-proof display. It delivers industry leading reliability and measurement accuracy. The GP series is ideally suited for monitoring or troubleshooting long term physical or electrical trends.
The GX series is an industry-first multi-point touch panel, to improve intuitive and smart operator control. Users can scroll, pan, zoom historical data, and even write freehand messages on its dust-proof and water-proof display. The Yokogawa GX series delivers industry leading reliability and measurement accuracy. Its custom graphics accommodates application or process-specific displays, while a wide range of communication protocols guarantee compatibility with your network architecture. It's simple for operators to view and retrieve past data with automatic email and FTP notifications.
Zebra의 혁신적인 ZXP 시리즈 8 재전사 (Retransfer) 카드프린터 계열과 Windows 인증 드라이버 및 ZMotif SDK 소프트웨어를 사용하여 필요할 때 완벽한 화질로 선명한 컬러 카드와 단색 카드를 즉석에서 발급하십시오. 이 재전사 카드프린터는 스마트 카드와 같이 표면에 요철부가 있는 카드 인쇄, 높은 이미지 품질이 요구되는 분야 또는 내구성 및 마모 내성이 개선된 카드 인쇄에 적합합니다.
혁신적인 재전사 (Retransfer) 인쇄 공정을 사용하는 지브라 ZXP 시리즈 8 은 일반 신분증 사진보다 광택이 많은 잡지 인쇄물처럼 보이는 영상과 그래픽으로 고품질 포토 ID 카드를 제작하는 데 필요한 최상의 인쇄 해상도를 동급 최고 속도로 제공합니다. 프린터에 모듈형 설계를 채택하고 있어 필요에 따라 다양한 인코딩 옵션을 유연하게 추가할 수 있습니다. 단면 또는 양면 코팅도 지원합니다.
탁월한 성능
ZXP 시리즈 8은 가로 모드로 이미지를 인쇄하는 특허 받은 양면 동시 전사 공정을 채택하여 동종 최고의 인쇄, 인코딩 및 코팅 성능을 제공함으로써 품질 저하 없이 처리량과 편평도를 향상시킵니다. Zebra의 이미지 처리 기술을 기반으로 브랜드 사양과 품질을 충족하는 사진 품질 컬러와 해상도를 얻을 수 있습니다. 이 시리즈는 내부와 외부를 모두 견고하게 설계하여 수리 비용이 절감되고 가동 중단 시간이 단축됩니다.
간편한 프린터 통합 및 관리
ZMotif XML 기반 드라이버와 SDK를 채택하여 간편한 설치 및 빠른 배포에 적합한 드라이버와 관리 유틸리티 도구를 갖춘 엔터프라이즈급 카드프린터 입니다. Microsoft® Windows® 인증 드라이버가 기존 소프트웨어 인프라에서 적용 호환성, 사용 용이성 및 투자 보호를 보장합니다. USB 및 이더넷 연결 인터페이스가 표준으로 제공되며, 지역 네트워크 또는 무선 시스템에 쉽게 통합되는 WiFi 옵션도 제공합니다.
보안 기능
ZXP 시리즈 8 에는 단면 또는 양면 코팅용 라미네이터 모듈 옵션 등 보안 강화에 유용한 많은 기능을 포함하고 있습니다. 전사 필름이 내장된 사기 방지 수단 조작 증거를 보여주며, 잠금형 케이스와 카드 공급기 옵션이 무단 사용을 방지할 수 있습니다. 이 시리즈에는 Kensington® 잠금장치 슬롯도 포함됩니다.
PRINTING
Dye sublimation retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
Photo quality image
Over-the-edge printing on standard CR80 media
* Print speed based on click to drop, average print coverage, with USB connectivity, card per hour (cph).
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card reject hopper (30 mil)
100 card output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows® certified drivers
Kensington physical lock capable
LAMINATOR SPECIFICATIONS
Single-or dual-sided lamination option (with dual-sided printer only)
180 cards per hour dual-sided printing and dual-sided lamination
GSA FIPS 201 approved (dual-sided lamination)
Uses Zebra True Secure i Series laminates only
Laminate for the top and bottom sold separately
Custom-coded laminates available
CARD SPECIFICATIONS
Card thickness: 30 ? 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite***
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)***
Technology cards: contact and contactless smart cards, UHF cards***
COMMUNICATIONS INTERFACES
USB V2.0
10/100 Ethernet (encoding over Ethernet requires ZBR PS-300 Ethernet-to-USB Device Server)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZXP 시리즈 7 열전사 단면인쇄 양면인쇄(옵션) 카드프린터 매뉴얼HION IT
지브라 ZXP7 시리즈 열전사 카드프린터로 대량발급 어플리케이션에서 사진과 유사한 품질의 카드를 인쇄합니다.
Zebra ZXP7 시리즈 카드프린터는 최신의 기술에 의해 대량으로 고품질의 카드를 빠르게 인쇄하며, 총 소유비용(TCO)을 낮춤으로써 사용자에게 뛰어난 가치를 제공합니다.
또한 정밀한 컬러 제어로 항상 선명한 카드를 인쇄합니다.
ZXP 시리즈 7 카드프린터는 혁신적인 디자인을 도입하였습니다.
지브라 ZXP 시리즈 7 카드프린터는 카드의 두께에 따라 자동으로 조정되고 간편하게 리본을 로딩할 수 있습니다.
색상으로 구분된 안내와 선명한 LCD 제어판으로 누구나 쉽게 사용할 수 있으며, 다양한 인코딩 및 연결 옵션 중에서 선택하면 됩니다.
그리고 특별한 보안 또는 내구성이 필요한 카드의 경우에는 폐기물 없는 단면/양면 라미네이트를 사용할 수 있습니다.
잠금 메카니즘은 프린터와 미디어를 보호하며 필요에 따라 소프트웨어로 작업을 추적하고 제한함으로써 보안을 더욱 강화할 수 있습니다.
성능 : 카드마다 필요한 방식으로 작동
ZXP 7 시리즈 카드프린터는 오늘날의 까다로운 비즈니스 니즈를 충족시킬 수 있도록 제작되었습니다.
광범위한 환경과 어플리케이션에서 바로 사용할 수 있는 강력한 디자인
사진 인쇄 기술을 적용하여 사진과 유사한 인쇄 품질 및 색의 농도 생성
풀전사(edge-to-edge)카드 인쇄
라미네이터로 카드의 보안 보장 및 이미지 수명 연장
생산성 : 빠른 속도와 간편한 유지보수
ZXP 7 시리즈 카드프린터는 빠른 인쇄 속도로 생산성을 향상시키고 대기 시간을 줄입니다:
빠른 click-to-drop 및 배치 인쇄 속도
최대 세가지 작업(인코딩, 인쇄, 라미네이팅)의 동시 처리로 가장 빠른 처리량 제공
보다 빠른 인쇄를 위해 개발된 ix Series™ 리본
양면 동시 라미네이팅
용이한 통합 및 간편한 유지보수가 가능합니다:
높은 미디어 용량
리본과 라미네이트 롤 사이즈 동일
리본 로딩 및 운영 간소화
Windows® 드라이버, ZMotif™SDK, 빠른 설치를 위한 네트워킹 옵션
적용성 : 현재 및 미래의 비즈니스 니즈 충족
ZXP 7 시리즈 카드프린터는 진정한 유연성을 제공합니다.
필요시 옵션을 구매하여 카드 인쇄 어플리케이션 포트폴리오 확장 및 투자 관리를 동시에 할 수 있습니다.
옵션 :
단면 또는 양면 인쇄
다양한 인코딩 및 연결 옵션
폐기물 없는 단면 또는 양면 라미네이트
물리적 보안 잠금 메커니즘
적용성 및 소프트웨어를 통한 제어:
ZXP Toolbox를 통해 프린터, 드라이버, 소프트웨어 설정에서부터 관리, 진단까지 고급 제어 기능 제공
고급 보안 기능으로 사용자별 기능 및 권한 설정에 필요한 관리 유연성 제공
소프트웨어 개발자는 ZMotif SDK를 사용하여 고급 기능의 간편한 통합 또는 맞춤형 인쇄 어플리케이션 개발 가능
비용 효율성 : 카드 당 비용을 최소화하도록 설계된 소모품
ZXP 7 시리즈 카드프린터는 Zebra True Colours® ix Series 리본과 Zebra True Secure™ i Series™ 라미네이트를 함께 사용하도록 설계되었습니다.
대용량 리본은 롤 당 더 많은 이미지를 제공함으로써 비용을 줄이고, 보다 빠른 속도로 고품질의 이미지를 인쇄할 수 있는 개선된 포뮬레이션을 자랑합니다.
대부분의 리본 타입은 모든 인쇄 업무의 니즈를 충족시키기 위해 두 가지 사이즈로 제공합니다.
Zebra True Secure 라미네이트는 카드 위조 위험을 줄이고 강력한 보안 카드의 수명을 연장시켜 줍니다.
독창적인 라미네이트 디자인은 라미네이트의 Carrier, Backing, Liner 를 제거함으로써 폐기물을 급격히 줄여 줍니다.
또한 특수 설계된 카트리지로 라미네이트를 간단하게 교체할 수 있습니다.
리본과 라미네이트 모두 지능형 미디어 기술을 활용하여 프린터를 자동으로 감지하고 보정합니다.
STANDARD FEATURES
300 dpi/11.8 dots per mm print resolution
USB 2.0 and Ethernet 10/100 connectivity
Microsoft® Windows Certified drivers
200-card capacity feeder (30 mil)
15-card reject hopper (30 mil)
100-card output hopper (30 mil)
Single-card feed capability
ix Series intelligent media technology
21-character x 6-line LCD operator display with configurable soft keys - Kensington® physical lock slot
Two-year unlimited warranty on printer and printhead
OPTIONAL FEATURES
Single-sided laminator
FIPS 201 compliant dual-sided laminator
Lockable enclosures and card feeder**
EXtended product warranty programs
802.11b/g wireless connectivity
1D barcode scanner
Duo-Print upgrade kit
NOTE: FIPS201 compliant dual-sided laminator is only for North America.
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11b/g wireless option
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
초고속으로 사진처럼 생생한 이미지 품질 구현
보안성이 뛰어난 애플리케이션 요구를 충족하도록 설계된 ZXP 시리즈 9™을 사용하면 사진 품질의 카드를 빠르고 안정적으로 생성 할 수 있습니다. 안정성을 자랑하는 ZXP 시리즈 9 카드프린터는 사진과 그래픽 인쇄에 적합하며 지브라의 Color Predictive Technology (색상 예측 기술)를 채택하고 있습니다. 이 기술은 지속적인 모니터링과 프린터 설정 즉시 적용을 통해 최고 수준의 품질을 자동으로 생성합니다. 본 재전사 프린터 제품은 스마트 카드와 같이 표면이 고르지 않은 경우에도 내구성이 뛰어난 풀전사 카드 제작이 가능합니다.
탁월한 인쇄 품질과 성능
ZXP 시리즈 9 재전사 카드프린터는 탁월한 품질과 안정성, 빠른 처리 속도, 더 많은 옵션과 귀중한 비용 및 시간 절감 효과를 제공합니다.
고품질 카드를 빠른 속도로 인쇄하며, 동급 최강의 재전사 및 라미네이트 기술로 강화된 보안을 보장합니다.
유연하고 간편한 작업
ZXP 시리즈 9 카드프린터를 통합 및 관리하는 데 필요한 도구를 제공하는 종합적인 소프트웨어 제품군을 사용하여 맞춤형 카드 디자인을 생성할 수 있습니다. 사용자 선택 가능 인쇄 품질 모드는 더 많은 옵션과 제어 기능을 제공합니다. 특허받은 Zebra의 양면 동시 재전사 인쇄 설계로 인쇄 도중 프린터가 카드를 기계적으로 뒤집을 필요가 없습니다. 이 기술 덕분에 기계적 오류나 카드 걸림 현상이 감소합니다. 그리고 Print Touch™ 및 QR 코드 기술이 즉석에서 관련 정보와 지원을 제공합니다.
보안 기능 추가
특수 홀로그램 라미네이트와 함께 암호화, 프린터 호스트 인증 등의 프린터 기반 보안 기능으로 보안을 한층 더 강화하고 불법 위조, 변조 및 복제를 방지할 수 있습니다. 지브라는 카드 위조 방지를 위해 전용 카드 보안 기능이 필요한 맞춤형 홀로그램 라미네이트를 지원합니다. ZXP 시리즈 9는 무단 사용을 방지하기 위한 카드 피더 및 인클로저와 함께 선택적으로 잠금 기능도 라미네이터에 탑재할 수 있습니다.
PRINTING
Dye diffusion retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
User-selectable print modes: standard and fine
Photo-quality images
Over-the-edge printing on standard CR80 media
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card capacity reject hopper (30 mil)
100 card capacity output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows certified drivers
Kensington physical lock capable
CARD SPECIFICATIONS
Card thickness: 30 - 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite**
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)**
Technology cards: contact and contactless smart cards, UHF cards**
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11 b/g wireless connectivity
ELECTRICAL
Auto-switching single-phase AC power
100V~240V AC and 50-60 Hz
PHYSICAL
Height (w/ card hoppers): 13.2”/334 mm
Width (w/ card hoppers): 18.75”/476 mm
Width (w/ card hoppers, w/ laminator): 30.75”/781 mm
Depth: 20.4”/519 mm
Weight (printer only): 27.5 lbs./12.5 kg
Weight (printer, laminator): 44 lbs./20 kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410RFID ZT420RFID 열전사감열 산업용 RFID프린터 매뉴얼HION IT
Zebra ZT400 시리즈 RFID 프린터 / 인코더는 혹독한 환경 속에서 안정적인 인쇄와 인코딩에 필요한 고급 기능을 제공합니다.
RFID 라벨링의 가격대비 성능을 선도하는 지브라의 ZT400 RFID 프린터는 여러 산업분야의 다양한 애플리케이션을 지원합니다.
지브라 ZT400 RFID는 RZ™ 시리즈보다 처리량 및 극한 환경에서 생산성을 향상시키는 견고한 금속 프레임을 특징으로합니다.
ZT400 시리즈는 4인치 ZT410 및 6인치 ZT420 은 0.6 "/ 16 mm의 작은 라벨을 인쇄 및 인코딩 할 수 있으며, 소형 라벨 애플리케이션에 대한 정확한 등록으로 최대 600 dpi를 인쇄 할 수 있습니다.
직렬, USB 2.0, 블루투스 및 10/100 이더넷 통신을 비롯한 다양한 표준연결 옵션은 물론 802.11 a / b / g / n 보안 무선 및 병렬 옵션도 제공합니다.
Integrated ThingMagic® RFID reader/encoder
RFID system is available as a factory- or field-installable option
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Adaptive encoding technology automatically eliminates complex RFID placement guidelines
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Auto-tag calibration for label lengths of 2” or greater
Optimised for throughput of both small and large labels
RFID job-monitoring tools track RFID performance
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
RFID ZPL® commands provide compatibility with existing Zebra RFID printers
RFID
Integrated RFID system is user-upgradable in the field
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Track performance with RFID job-monitoring tools
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
Integrated ThingMagic® RFID reader/encoder
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory :
256 MB RAM memory (4 MB user available)
512 MB Flash memory (64 MB user available)
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm
Media Sensors : Dual media sensors: transmissive and reflective
Media Characteristics : Media web width (label and liner)
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410 ZT420 열전사감열 산업용 바코드프린터 매뉴얼HION IT
지브라프린터 ZM400 후속 모델로 지브라 ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 다양한 어플리케이션에서 장시간 사용이 가능 하도록 설계된 뛰어난 산업용프린터로 귀사의 중요 업무를 효율적으로 지원 할 것입니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 현장에서 입증된 Z Series의 신뢰성을 바탕으로 인쇄속도 인쇄품질 및 네트워크 연결 옵션을 더욱 개선하였습니다.
또한 사용자 편의성을 고려하여 디자인된 ZT400 시리즈 바코드프린터는 직관적인 아이콘 기반의 LCD 그래픽 사용자 인터페이스를 제공하며 소모품을 간편하게 장착할 수 있습니다.
통신연결은 USB, 직렬, 이더넷 및 블루투스 포트를 기본으로 제공하며, 확장된 RFID 기능은 더욱 강력한 추적 능력과 상세한 가시성을 제공합니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 4인치, 6인치 모델로 제공되며, 귀사의 바코드프린터 투자에 현재와 미래의 요구를 항상 충족시킬 수 있도록 광범위한 고급 기능을 표준으로 제공합니다.
외관은 전체가 금속 프레임과 접이식 도어로 구성되어 공간이 제한된 환경에 적합하도록 설계되었습니다.
강력한 멀티플렛폼 SDK (Software Development Kit)와 소프트웨어 어플리케이션이 결합된 혁신적 운영체제인 제브라의 Link-OS 환경을 통해 전세계 어디에서나 통합, 관리, 유지보수가 용이합니다.
ZT410
Maximum print width : 4 인치
Maximum ribbon length : 450 m
Maximum print speed ; 14 ips
User Interface : LCD
Print resolution : 203, 300, 600 dpi
Printer control language : ZPL, EPL, others
ZT420
Maximum print width : 6 인치
Maximum ribbon length : 450 m
Maximum print speed ; 12 ips
User Interface : LCD
Print resolution : 203 and 300 dpi
Printer control language : ZPL, EPL, others
어플리케이션 유연성
폭넓은 범위의 사용가능한 미디어와 미디어 배송 옵션으로 프린팅 준비성 확대
최종 사용자가 설치 가능한 미디어 핸들링 옵션으로 현재와 미래의 비지니스 요구에 맞게 프린터 커스터마이징 가능
직렬, USB, 이더넷 및 블루투스의 기본 제공 및 기타 연결 옵션을 위한 두개의 개방형 미디어 슬롯
설치 및 사용 용이성을 고려한 확장된 RFID 기능
고해상도 인쇄기능으로 소형 바코드라벨 어플리케이션에서 고품질의 결과물 보장
간편한 통합
USB 호스트 포트의 장착으로, 미러링을 통한 USB 플래시 드라이브 데이터의 간편한 전송과 확장된 매핑 드라이브 메모리 기능을 활용하여 간단한 프린터 설정 가능
Virtual Device 앱을 통해 ZPL 및 EPL 이외 주요 래거시 및 경쟁사 프린터 언어를 지원함으로 미래에 대비한 투자 가능
용이한 조작
Dynamic QR 코드로 프린터 오류의 신속한 해결을 위한 온디맨드, 웹 기반의 지원 제공
Print Touch 를 지원하는 Link-OS 프린터는 NFC(Near Field Communicatrion)를 사용하여 웹 페이지 실행, 사용법에 관한 동영상과 제품 지원에 관한 지브라의 광범위한 지식 기반에 편리하게 엑세스
미디어 및 리본 경로의 조명으로 어두운 환경에서도 프린터 내부 확인 용이
간단한 관리
지브라의 Link-OS 환경으로 어느 곳에서나 프린터의 모니터, 관리 및 유지보수가 가능한 진보된 기능 제공
Clould Connect를 이용하여 인쇄 및 기기 관리를 위한 Link-OS 지원 프린터와 클라우드의 안전하고 직접적인 상호 작용 가능
Profile Manager를 통해 전세계 어디에서든 단일 프린터, 복수의 프린터, 또는 네트워크상의 모든 Link-OS 지원 프린터를 편집 및 관리
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory : 256 MB SDRAM/ 512 MB on-board linear Flash memory
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm per second
Media Sensors : Dual media sensors - transmissive and reflective
Media Characteristics - Media web width (label and liner):
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT220 ZT230 열전사감열 산업용 바코드프린터 매뉴얼HION IT
S4M 바코드프린터의 장점을 바탕으로 고객으로부터의 다양한 의견 수렴을 통하여 출시된 새로운 ZT200 시리즈 바코드프린터는 우수한 공간 절약형 디자인, 손쉬운 설정, 직관적인 사용자 운영 그리고 편리한 서비스 및 유지보수 등의 특징을 가지고 있습니다.
ZT200 바코드프린터 시리즈는 바코드 기술의 신규 도입부터 기존 바코드프린터 모델의 업그레이드까지, 다양한 라벨링 어플리케이션에 적합한 탁월한 선택이며, 이 혁신적인이고 새로운 프린터는 많은 사용자에게 혜택을 제공할 것입니다.
지브라 ZT200 바코드프린터 시리즈는 효율적인 디자인과 작은 크기로 Stripe와 S4M 모델 보다 물리적 공간을 더욱 작게 차지하며 최소한의 운영자 교육, 주요 구성요소에 대해 공구가 필요없는 유지보수 서비스를 제공합니다.
또한 기존 시스템과의 완벽한 호환성을 제공하기에 IT 담당자는 다운타임을 최소화하면서 새로운 프린터를 운영할 수 있습니다.
ZT220
지브라의 가장 저렴한 탁상용 프린터
충격에 강하고 견고하여 오래 사용할 수 있는 폴리머 케이스
300m 리본 용량
사용자가 간단하게 사용할 수 있는 3개의 조작 버튼
바코드라벨의 교체가 빈번하게 발생하는 작업에 이상적입니다.
ZT230
견고한 금속 케이스로 오래 사용할 수 있습니다.
가동 시간을 늘리고 리본 교환 횟수를 줄이기 위한 450m 리본 용량
화면 표시 내용이 그래픽으로 처리되어 바코드프린터 설정 및 제어가 편리함
바코드라벨의 교체가 좀 더 빈번하게 발생하는 작업에 이상적입니다.
지브라 ZT200 바코드프린터 시리즈는 고객의 다양한 의견과 고객의 프린팅 어플리케이션, 진화하는 비즈니스 요구와 운영상의 문제점에 대한 이해를 바탕으로 설계된 최고의 제품으로, ZT200 시리즈는 동급 프린터에서 일반적으로 찾을 수 없는 탁월한 성능과 특징을 제공합니다.
공간 절약형 디자인
제한된 좁은 공간에 적합한 작은 설치 공간과 효율적인 설계
업무 공간을 최대화하며 좁은 공간에도 적합한 독특한 접이식 도어의 공간 절약형 디자인(개방 공간 102mm/4” 필요)
빠른 설치 및 통합
구형 Stripe 및 S4M 모델의 완벽한 후속 모델
다중 연결 옵션: 병렬, 10/100 이더넷, 802.11b/g/n 무선
아이콘 기반의 상태 LED로 프린터 상태를 쉽고 즉각적으로 파악
직관적이고 손쉬운 미디어 장착
복잡한 소모품 장착을 간소화하는 측면 장착 디자인
처음 사용자도 리본 및 미디어를 장착할 수 있도록 색깔로 표현된 시각적 안내 제공
미디어를 통해 보이는 발광형 이동식 센서로 간단하게 센서 위치 조정
인쇄 품질
미세 조정으로 더 나은 인쇄 정확도를 보장하도록 제작
선명하고 깔끔한 텍스트 및 바코드 - 좁은 미디어에서도 가능
Zebra 신뢰성과 내구성
경공업 및 상업 환경에 적합하도록 제작
Energy Star® 인증
최소한의 유지보수로 최적의 성능을 제공하도록 설계된 드라이브 시스템
간소화된 사용성
플래턴과 프린트헤드를 도구없이 쉽게 제거함으로써 간단히 청소와 교체 가능
손쉽게 교체 가능한 연결 옵션으로 신속한 프린터 교체 및 업그레이드 가능
일반적인 도구 3개로 기본 서비스 가능
PRINTER SPECIFICATIONS
Resolution ;
8 dots per mm/203dpi
12 dots per mm/300dpi (optional)
Memory : Standard / 128MB flash (58MB user-available), 128MB DRAM
Print width ;
104mm/4.09"
Minimum: 0.75"/19.4mm
Print speed : 152mm/6" per second
Media sensors : Transmissive and reflective sensors
Media characteristics ;
Maximum label and liner width : 114mm/4.5"
Maximum non-continuous label length : 991mm/39"
Media width : 19.4mm/0.75" to 114mm/4.50"
Print length ;
203dpi : 3,988mm/157"
300dpi : 1,854mm/73"
Maximum media roll size ;
203mm/8.0" O.D on a 76mm/3.0" I.D. core
152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Media thickness : 0.076mm/0.003" to 0.25mm/0.010"
Media types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZE500시리즈 열전사감열 RFID프린터엔진 오토라벨러엔진 바코드프린터엔진 매뉴얼HION IT
지브라의 새로운 ZE500™ 시리즈는 OEM 바코드 인쇄 엔진에 대한 혁신적인 접근 방식을 채택했습니다.
Zebra ZE500 시리즈 바코드 프린터 엔진은 광범위한 설문 조사를 활용하여 디자인, 사용 편의성, 서비스 및 통합 용이성에 중점을 두고 중요한 자동라벨링 업무에 중단없이 작동하도록 설계되었습니다.
우아한 디자인의 ZE500 바코드 프린터 엔진은 유지 보수를 단순화하고 유지 보수에 대한 가동 중단 시간을 획기적으로 줄여주며 3개의 롤러는 모두 프린터의 전자 장치에 접근할 필요없이 수 분 만에 교환 할 수 있습니다.
와이드 오픈 프린트 헤드는 청소 및 교체를 단순하게하며 퀵 체인지 모듈 식 드라이브 시스템은 프린터 수리 시간을 줄입니다.
확장된 RFID 기능은 보다 향상된 추적 성능을 제공하여 운영 효율성을 향상시킵니다.
리본 교체와 같은 일상적인 작업은 매우 간단합니다 (두 인쇄 폭 모두 동일).
새로운 그래픽 LCD 디스플레이는 장치에서 분리할 수 있으며 사용 편의성을 위해 응용 프로그램에 적합한 위치에 재배치 할 수 있습니다.
인쇄 및 적용할 기계와 쉽게 통합할 수 있으며 먼지와 물에 대한 내성이 뛰어납니다.
확장된 연결 포트 및 어플리케이터 포트의 향상된 소프트웨어 제어 기능은 통합 유연성을 한층 향상시킵니다.
Resolution: 203 dpi (8 dots per mm); 300 dpi (12 dots per mm)
Rotatable front panel display (0,180)
16MB SDRAM memory, 64MB Flash Memory
Available in right and left hand configurations
ZebraNet 10/100 Print Server (Internal)
Embedded ZebraLink WebView™and Alert features
Real Time Clock
Applicator interface - provides status and control signals for applicators
Communications via serial RS-232, IEEE 1284 bidirectional parallel interface with auto detect, and USB 2.0 port
Full function graphic front panel & large multilingual back-lit LCD display with user programmable password protection
Thin film print head with E3® Element Energy Equalizer
Dual media sensors, transmissive and reflective, selectable through software or front panel
ZPL® or ZPL II® programming language, selectable through software or front panel
XML-Enabled Printing ? allows XML communications from today's enterprise systems for barcode label printing
32 bit 133 MHz RISC processor
Zebra printer driver for Windows 7, XP, Vista, 2008, and 2003 operating systems
Advanced media counters
PRINTER SPECIFICATIONS
ZE500-4™ :
Maximum print width : 4.1”/104 mm
Media specification :
Label and liner width: 0.625”/16 mm to 4.5”/ 114 mm
Minimum length with back feed: 0.5”/13 mm
Minimum length without back feed: 0.25”/6.5 mm
Minimum length in stream mode: 0.25”/6.5 mm
Maximum length: 39”/990 mm
Maximum continuous media print length: 150”/3,810 mm
Ribbon width: 1”/25.4 mm to 4.2”/107 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed : 12”/305 mm per second (203 and 300 dpi)
ZE500-6™ :
Maximum print width : 6.6”/168 mm
Media specification
Label and liner width : 3”/76 mm to 7.1”/180 mm
Minimum length with back feed : 3”/76 mm
Minimum length without back feed : 1”/25.4 mm
Minimum length in stream mode : 1”/25.4 mm
Maximum length : 39”/990 mm
Maximum continuous media print length : 150”/3,810 mm
Ribbon width : 3”/76 mm to 7.1”/180 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed
12”/305 mm per second (203 dpi)
10”/254 mm per second (300 dpi)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
고객의 니즈를 충족시키는 고성능 옵션의 지브라 G 시리즈™ GX™ 및 ZD500™ 데스크탑 바코드프린터는 가장 빠른 인쇄 속도와 함께 이더넷, LCD 화면, 무선 또는 블루투스를 비롯한 다양한 첨단 기능 및 옵션을 제공합니다.
확장된 미디어 처리 기능으로 Peel & Present와 라벨, 영수증 및 태그에 적합한 정밀 커터, 라이너리스 라벨 등을 제공합니다.
지브라 GX™ 시리즈 및 ZD500™ 고성능 바코드프린터는 지브라 데스크탑 바코드프린터 제품군 중에서 가장 빠른 인쇄 속도와 완벽한 기능 세트를 제공합니다.
혁신적인 라벨, 영수증 및 태그 처리 기능을 갖추고 있어 필요한 유연성을 얻을 수 있습니다.
최상의 인쇄 품질과 다양한 연결 옵션을 제공하는 GX420™, GX430™ 및 ZD500 프린터는 다양한 애플리케이션을 지원하고 거의 모든 환경에 통합 가능하기 때문에 사용자가 효율과 수익을 높이고 시간을 절약하여 작업자 교육을 최소화할 수 있습니다.
고해상도의 인쇄 품질, 4개의 연결 옵션을 제공하는 ZD500 프린터는 컴팩트하며 최고의 성능에 필요한 기능들을 탑재한 프린터입니다.
어디에서든지 손쉽게 통합, 관리 및 유지보수할 수 있는 Link-OS 지원 프린터입니다.
감열 또는 열전사 모드로 작동합니다.
포함된 기능
지브라의 고성능 데스크탑 바코드프린터는 향상된 효율성과 생산성을 위해 동급 최고의 인쇄 속도와 기능을 제공합니다.
각 모델은 다양한 연결 옵션과 ZPL® 및 EPL™(GX 모델만 해당) 프로그래밍 언어로 손쉬운 업그레이드 및 통합을 제공하고 총 소유비용(TCO)을 절감할 수 있는 ENERGY STAR™ 인증 프린터입니다.
애플리케이션 유연성을 극대화해주는 강력한 기능
확장된 미디어 핸들링 옵션으로 Peel & Present와 라벨, 영수증 및 태그, 라이너리스 라벨에 적합한 Cutter 등을 제공합니다.
블루투스와 WiFi를 포함한 다양한 연결 옵션. LCD 디스플레이(옵션)를 통해 프린터 설정을 변경할 수 있습니다.
특정 요구에 맞도록 구성 가능
감열 또는 열전사 모델로 제공되는 이들 소형 바코드프린터는 직관적인 디자인과 다양한 연결 옵션을 갖추고 있습니다.
GX430과 ZD500 프린터 모두 300 dpi 고해상도 인쇄가 가능하므로 텍스트와 그래픽으로 구성된 소형 바코드라벨 인쇄에 적합합니다.
PRINTER FEATURE
Print methods : Thermal Transfer and Direct Thermal
ZPL programming language
EPL programming language (GX model only)
Dual-wall frame construction
Tool-less printhead and platen replacement
Open ACDESS for easy media loading
Quick and easy ribbon loading
Simplified calibration of media
ENERGY STAR qualified
PRINTER SPECIFICATIONS
Resolution :
203 dpi/ 8 dots/mm per mm
300 dpi/ 12 dots/mm per mm (optional on ZD500)
Memory:
128 MB Std SDRAM memory (4 MB available to user)
256 MB Std Flash memory (56 MB available to user)
Real time clock
Maximun Print Width : 4.09"/ 104 mm
Maximun Print Length : 39.0"/ 990 mm
Maximun Print Speed :
6"/152 mm per second (203 dpi)
4"/102 mm per second (300 dpi)
Media Sensors : Multi-position transmissive and adjustable reflective sensor
MEDIA CHARACTERISTICS
Label and Liner Length :
Maximum non-continuous : 39"/ 990 mm
Maximum using tear off mode : .25" (6.3 mm)
Minimum with label present sensor used : 0.5"/ 12.7 mm
Minimum with cutter : 1.0"/ 25.4 mm
Label and Liner Width : 0.75"/ 19 mm - 4.25"/ 108mm
Media Roll Size :
Maximum outside diameter : 5"/127 mm
Core inner diameter : 0.5"/ 12.7 mm, 1.0"/25 mm, 1.375"/ 35 mm, 1.5"/37.1 mm, 3"/ 76mm
Media Thickness : .003"/0.08 mm to .012"/ 0.305 mm
Media type : Roll-fed or fan-fed, dia-cut or continuous direct thermal label with or wothout black tag, stock, continuous receipt paper, wristbands
Ribbon charcateristics :
Outside diameter : 1.36"/ 35 mm
Standard length : 244"/ 74 m
Ratio : 1:1 media to roll to ribbon
width : 1.33"/ 33.8 mm to 4.3"/ 109.2 mm
Core inner diameter : 0.5"/ 12.7 mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 QLn 시리즈 모바일 프린터의 확장인 QLn220 ™ 및 QLn320 ™ 헬스케어 프린터는 의료 시설의 요구에 맞게 특별히 설계되었습니다.
지브라 헬스케어 모바일 프린터는 세균으로 부터 환자를 보호하기 위해 내구성이 높고 소독이 가능한 재료를 사용하여 제작되었습니다.
특히 의료용으로 개발된 Zebra의 QLn 시리즈 프린터를 사용하면 다음과 같은 업무를 지원합니다.
병원 침상 옆의 표본을 모으고, 수집 및 관련 레이블을 만들 수 있습니다.
Zebra의 Link-OS® 환경으로 모든 인쇄 장치를 가상으로 관리, 유지 보수 및 업그레이드 할 수 있습니다.
프로파일 관리자 응용프로그램을 사용하여 프린터 구성을 제어하고 형식 출력 및 인쇄물의 일관성을 유지합니다.
서비스 요청 감소
CLSI (Clinical and Laboratory Standards Institute®) 표준을 만족하는 라벨 인쇄
STANDARD FEATURES
Includes disinfectant-ready plastics in a lighter healthcare color scheme
Apple® iOS, Android, Windows Mobile and BlackBerry® connectivity
Direct thermal printing of barcodes, text and graphics
CPCL, EPL™ and ZPL® programming languages
256 MB Flash supports downloadable programs, receipt formats, fonts and graphics (64 MB available for user storage)
2450 mAh (nominal) 18.1 Wh removable, rechargeable Li-Ion battery
Built-in battery charger
IEC 60601-certified AC adapter for medical environments
Serial and USB ports (both support strain relief)
Belt clip for unobtrusive and convenient printing (not compatible with extended capacity battery)
Black mark and gap media sensing using fixed center position sensors
Easy-to-use peel and present mode
Label present sensor for issuing labels one at a time
Tear bar for easy media dispensing
Center-loading media locking for variable roll widths
“Clamshell” design for easy media loading
Management: Mirror, SNMP, Web server, Profile Manager, AirWatch® and Wavelink Avalanche®
Large, easy-to-read LCD control panel (240 x 128 pixels)
LCD can be customized using WML (text and icons)
5-way navigation buttons, two software defined keys
Printer alerts on the display, help menus
Tolerance of multiple drops from 5’/1.52 m to concrete
IP43 dust- and water-resistance rating (IP54 with soft case)
400 MHz 32-bit ARM processor
XML support
Supports vertical and horizontal printing
Printers can be used in any orientation
QR barcode links to web-based help pages
Zebra Print Touch simplifies Bluetooth pairing and launches web-based help pages with Near Field Communication (NFC) enabled devices
Label odometer
Real-time clock
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 256 MB Flash (standard)
Print Width : 1.9”/48 mm
Print Length : Min: 0.5”/12.7 mm, Max: 32”/813 mm
Print Speed : Up to 4”/102 mm per second
Media Sensors : Black mark and gap media sensing using fixed center position sensors; label present sensor for issuing labels one at a time
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MP6000, 2D 고정식 바코드스캐너는 거의 모든 인쇄 또는 휴대폰, 태블릿PC 화면의 1D 또는 2D 바코드를 사실상 놀라운 속도로 모든 상황에서 캡처 할 수 있습니다.
놀라운 스캔 성능
지브라의 업계에서 입증된 선도적인 이미징 기술을 사용하면 오늘날 사용 가능한 어떤 레이저 바이옵틱 스캐너보다 빠른 속도로 바코드를 스캔할 수 있습니다.
각종 바코드 캡처
어떤 종류의 1D 및 2D 바코드라도 자동으로 판독/평가할 수 있습니다.
종이 라벨에 인쇄되어 손상되었든, 플라스틱 고객카드나 기프트카드에 인쇄되어 있든, 휴대전화 화면에 표시되어 있든 상관 없습니다.
탁월한 신뢰성, 비용 및 총소유비용(TCO) 절감
고장 및 유지 관리 비용을 최소화할 수 있습니다. 스캔 엔진에 작동 부품이 없으므로 전력 소비량이 최소 30% 감소하고 정전용량형 버튼도 마모되는 일이 없습니다.
매장 및 고객 요구 사항에 맞게 맞춤 가능
6개 포트가 있으므로 스케일, 고객이 휴대전화나 고객카드의 바코드를 스캔할 수 있는 고객 스캐너(Customer Side Scanner), 핸드헬드 스캐너, EAS 기기 등과 같은 새로운 기능을 손쉽게 추가할 수 있을 뿐만 아니라, RFID와 같은 미래의 요구 사항에 맞게 확장도 가능합니다.
탁월한 관리 기능
보완적 관리 소프트웨어를 사용하면 스캐너, 스케일, 연결된 모든 주변 기기를 비롯해 전체 스캐너 솔루션을 원격으로 관리할 수 있습니다.
사파이어 유리
수평 스캔 창에 업계 최고의 유리를 사용하여 긁히지 않고 마모나 훼손에도 취약하지 않습니다.
통합 EAS 지원
현재 사용 중인 Checkpoint® 또는 Sensormatic® 시스템을 지원하므로 업그레이드하느라 별도의 시간 및 비용이 들지 않습니다.
초 저소음
레이저 스캐너와 달리 모터 소음이 없는 MP6000은 매우 조용하여 POS 환경을 개선시켜 줍니다.
사용 편의성
전방향 스캔 및 6면 720° 커버리지 영역을 지원하므로 신속하게 스캔하고 정확하게 계산을 마칠 수 있습니다.
고객측 스캐너(옵션)
고객이 자신의 고객카드, 쿠폰, 충동 구매 품목 및 휴대전화에 표시된 바코드를 동시에 스캔할 수 있습니다.
손쉬운 설치
기존 계산대에 잘 맞습니다.
3개의 프로그래밍 버튼
푸시버튼을 사용해 광범위한 POS 프로세스를 간소화하여 처리량을 향상시켜 줍니다.
PHYSICAL CHARACTERISTICS
Dimensions :
Long scanner and scanner/scale :
20 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 507 mm L x 292 mm W x 102 mm D x 128 mm H
Medium scanner and scanner/scale : 15.7 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 399 mm L x 292 mm W x 102 mm D x 128 mm H
Short scanner : 13.9 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 353 mm L x 292 mm W x 102 mm D x 128 mm H
Weight :
Long scanner : 15.2 lb./6.9 kg
Long scanner/scale : 18.3 lb./8.3 kg
Medium scanner : 13.0 lb./5.9 kg
Medium scanner/scale : 16.2 lb./7.4 kg
Short scanner : 12.0 lb/5.4 kg
Scale :
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
Maximum static weight: 300 lb./136 kg
Scale can be added after scanner installation (most countries)
Single-cable and dual-cable protocols
Compatible with Mettler and Bizerba price computational scales
Options :
0-12 lb. in 0.005 lb. increments and 12-30 lb. in 0.01 lb. increments
0-6 kg in 2 g increments and 6-15 kg in 5 g increments
Single-head and dual head remote scale displays
Dual heads rotate throug 290° for widest viewing angles on the market
Horizontal Glass : Sapphire; integrated Produce Lift Bar
User Interface :
Soft touch capacitive pads (no buttons to break or wear out)
Wide, centrally located two-color decode/ information bar (clear for cashiers and self-checkout users)
Beeper: adjustable volume and beep tones
Three programmable buttons
Ports :
One shared POS port for USB/RS-232/ IBM RS-485
Three USB peripheral ports
Two powered RS-232 peripheral ports
Checkpoint interlock port
Remote scale display port
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC70 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC70 / TC75 산업용 PDA는 처음부터 기업용으로 제작된 전문가용 안드로이드 디바이스입니다.
업무를 효율적으로 처리하고 고객에게 향상된 서비스를 제공하려면 지속적인 통신과 정보 액세스가 가능한 엔터프라이즈급 핸드헬드 컴퓨터가 필요합니다.
그러나 직원들은 일반 소비자 기기와 같이 세련되고 사용하기 쉬운 장치를 원합니다.
지브라 TC70 바코드 PDA는 이 두 가지 요구를 모두 충족시킬 수 있습니다.
Mobility Extensions(Mx)는 AndroidTM 를 진정한 의미의 엔터프라이즈급 운영체제로 만들어줍니다.
Zebra TC70 안드로이드 기반의 산업용 PDA는 견고한 디자인으로 가장 까다로운 환경에서도 안정적으로 사용할 수 있으며 양방향 무전기로도 활용할 수 있습니다.
내장 스캐너와 카메라를 사용하면 어떠한 유형의 비즈니스 인텔리전스도 자동으로 캡처할 수 있습니다.
완벽한 액세서리 및 최신 기술 구성으로 현재뿐 아니라 미래 비즈니스까지 지원할 수 있으므로 높은 투자 수익률을 기대할 수 있습니다.
지브라 TC70은 소매, 제조 및 영업 분야에서 고객에게 보다 나은 서비스를 제공할 수 있습니다.
실질적인 경쟁 우위를 확보할 수 있습니다.
Mobility Extensions(Mx) 및 Mobility DNA와 함께 기업용으로 강화된 Android KitKat
모든 TC70/ TC75 산업용 PDA에는 안드로이드를 소비자급 운영 체제(OS)에서 진정한 엔터프라이즈급 OS로 변신시켜주는 Mobility Extensions(Mx)가 함께 제공되며, 엔터프라이즈급 보안과 장치 관리가 가능하고 엔터프라이즈급 데이터 캡처 기능을 지원합니다.
완벽한 성능뿐 아니라 간편한 Mobility DNA로 모빌리티 효율성을 향상시킵니다.
이 모빌리티 솔루션은 Zebra 모바일 기기에 통합된 상용, 최종 사용자 앱, 강력한 관리 유틸리티 및 간편한 앱 개발 도구를 기반으로 가장 빠르고 간편한 모바일 성능을 지원합니다.
데이터 입력 유연성을 극대화 하기위한 업계 최고의 듀얼 모드 터치 패널
맨 손가락 및 장갑 낀 손가락 또는 맨 손가락 및 스타일러스 등 선호하는 데이터 입력 모드를 선택할 수 있어, 선명한 서명 캡처에 이상적입니다.
데이터 입력 방법을 전환할 때마다 설정을 조정해야 하는 경쟁사 장치와는 달리, 이 지능형 4.7인치 디스플레이는 필요에 따라 자동으로 조절됩니다.
업계 최고의 포괄적인 오디오 기능으로 새로운 차원의 음성 유연성 지원
대중적인 스마트폰의 음량을 최대 4배까지 증폭하고 소음 제거 기술을 제공하는 TC70/ TC75 PDA는 모든 통화마다 양쪽 사용자에게 깨끗한 오디오 품질을 선사합니다.
Workforce Connect PTT(Push-to-Talk) Express 및 Pro 지원으로 현장에서 동료와 빠르게 연결될 수 있으며 관리자 및 다른 사무 지원 인력과의 협업을 통해 고객 요구에 신속하게 대응할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 6.3 in. L x 3.3 in. W x 1.1 in. D/ 161 mm L x 84 mm W x 28 mm D
Weight : 13.3 oz./376 g
Display : 4.7 in. High Definition (1280 x 720); exceptionally bright, outdoor viewable; optically bonded to touch panel
Imager Window : Corning Gorilla Glass 2
Touchpanel : Dual mode capacitive touch with stylus or bare or gloved fingertip input (conductive stylus sold separately); Corning Gorilla Glass 2
Backlight : LED backlight
Power : PowerPrecision: Li-Ion 3.7 V, 4620 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC and SDXC support
Network Connections : USB 2.0 High Speed (host and client); WLAN
Notification : Audible tone; multi-color LEDs; vibration
Keypad : On-screen keypad
Voice and Audio : Three microphone support with noise cancellation; vibrate alert; speaker; Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU : 1.7 GHz dual core processor
Operating System : AndroidTM AOSP 4.4.2 (KitKat)
Memory : 1 GB RAM / 8 GB Flash pSLC
WIRELESS PAN
Bluetooth Bluetooth v4.0 (Bluetooth® Smart technology)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC55 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC55 산업용PDA를 통해 효율성과 고객 서비스 개선 작업을 처리하려면 작업자에게 실시간 데이터에 대한 안전하고, 신뢰할 수 있는 원격 액세스가 필요합니다.
개인용 스마트폰, 태블릿PC 및 랩톱은 매력적이고 사용하기 쉽지만 매일 비즈니스에 사용하는 데 필요한 내구성 또는 기능성이 떨어지는 문제가 있기 때문에 포켓 크기의 지브라 TC55 산업용 PDA는 이와 같은 걱정이 없습니다.
Zebra TC55 산업용 PDA는 자주 사용되는 개인용 기기의 최근 기술에, 세련된 디자인, 사용 편의성을 바탕으로 하지만 소비자용 모델과 달리 TC55에는 데이터 캡처 기능이 통합되어 있습니다.
TC55 바코드 PDA는 산업 환경에서의 마모를 견디도록 제작되었기 때문에 현장에서 고장이 발생할 가능성이 적습니다.
기업 환경의 일상적인 업무용으로 제작
지브라 TC55 바코드 DPA는 오랜 내구성을 제공하는 기능들을 갖추고 있습니다.
낙하 및 충격 사양, IP67 밀봉 및 Corning Gorilla Glass 2 디스플레이로 인해 낙하 및 유출 시에도 안정적인 작동이 보장되어 평균 수명 3년을 쉽게 달성할 수 있습니다.
최대 데이터 입력 유연성을 갖춘 업계 최고의 이중 모드 터치 패널
원하는 데이터 입력 모드를 손가락(두꺼운 장갑 착용 유무에 상관없음)또는 서명 캡처용 스타일러스 중에서 선택할 수 있습니다.
전력 소비가 적지만 매우 밝은 4.3인치로 정전식 터치 환경의 수준을 한 차원 높여줍니다.
지브라 TC55 모바일 컴퓨터는 또한 습기가 있는 상태에서도 작동하는 WVGA 디스플레이를 제공합니다.
데이터를 자동으로 캡처하고 전체 문서를 처리합니다.
SimulScan Document Capture를 통해 작업자가 하나의 버튼만 누르면 바코드, 텍스트 필드, 전화 번호, 이미지, 서명 및 확인란을 캡처할 수 있습니다. 즉, 송장 및 주문 처리 속도가 향상됩니다.
기업용 안드로이드
모든 지브라 TC55 산업용 PDA에는 소비자 운영체제의 AndroidTM 를 더욱 강화된 기업용 운영체제로 탈바꿈시킬 수 있는 다양한 기능을 제공하는 Mobility Extensions (Mx)가 기본으로 탑재되어 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions (with standard battery) : 5.4 in. L x 2.7 in. W x 0.63 in. D/ 137 mm L x 69 mm W x 15.9 mm D
Weight With standard battery : 7.8 oz./220 g
Display : Blanview® LCD display, 4.3 in. WVGA, exceptional low power consumption, exceptionally bright image with 700 NITs, 3% transflective, Corning Gorilla Glass 3
Camera/Imager Exit Windows : Corning Gorilla Glass 3
Touchpanel : Dual mode capacitive touch with stylus or fingertip (bare or gloved) input
Backlight : LED backlight
Power :
PowerPrecision Li-Ion batteries
Two options: Extented 1.5x 4410 mAh or Standard Capacity 2940 mAh battery
Expansion Slot : User accessible 32 GB microSD slot with SDHC support
Network Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
Notification : Vibrate and audible tone
Keypad : On-screen keypad
Voice and Audio : 2 front facing speakers; dual noise-cancelling microphones; high-quality speaker phone; 3.5mm headset jack , Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU ; 1.5 GHz dual core processor
Operating System : Android 4.1.2
Memory : 1 GB RAM / 8 GB Flash MLC
USER ENVIRONMENT
Operating Temp. : 14°F to 122°F/-10°C to 50°C
Storage Temp. : -40°F to 158°F/-40°C to 70°C
Humidity : 5% to 85% non-condensing
Drop Specification ; 4 ft./1.2 m drop to plywood per MIL-STD 810G; With protective boot: 5 ft./1.5m to concrete at room temperature
Tumble Specification :
300 1.6 ft/0.5 m tumbles;
With protective boot: 1000 1.5ft./0.5 m tumbles; meets and exceeds IEC tumble
Thermal Shock : -40°F to 158°F/-40°C to 70°C rapid transition
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PX4i PX6i 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
인터맥, EasyCoder PX (PX4i, PX6i) 시리즈 바코드프린터는 까다로운 산업환경에 맞게 설계된 견고한 금속의 고성능 프린터로, 24시간 작동을 지원합니다.
개방된 모듈식 디자인은 프린터가 쉽게 적응, 유지보수 및 서비스를 제공받을 수 있도록 합니다.
인터맥 PX 시리즈, PX4i 및 PX6i 산업용 바코드 프린터는 각각 4인치 또는 6인치의 최대 인쇄폭 기능이 특징입니다.
제조업 환경에서의 간편한 통합을 위해 설계된 PX 시리즈 산업용 프린터는 사실상 어떠한 위치라도 장착할 수 있습니다.
다기능성 폼 팩터가 라벨 자동부착기 같은 주변장치와의 연결을 용이하게 합니다.
인터맥 EasyCoder PX 시리즈 프린터는 사용자 정의 프로그램을 실행, 독립적으로 작동할 수 있어서 PC가 필요하지 않습니다.
최대 7개의 유선 및 무선 연결 인터페이스를 통해 스캐너, 스케일, 기타 프린터 및 컨베이어를 포함한 생산라인 기계장치에서 작동할 수 있을 뿐만 아니라 네트워크 호스트에서 정보에 직접 액세스할 수 있습니다.
최대의 성능 및 인쇄품질- 분당 최대 115개까지 6인치 길이의 컴플라이언스 라벨 인쇄
견고한 금속 구조로 열악한 산업환경에서도 24시간 / 7일 인쇄제공
변화하는 호스팅 환경 및 응요운야에 쉽게 적응
자동화된 라벨 부착 응용분야의 통합을 위한 모듈화 디자인
PC 비용을 들이지 않는 독립형 프린터 응용지원
IPL 또는 Fingerprinter/DP 프린터 명령 언어 선택
203, 300 또는 400 dpi 인쇄 해상도의 선택 사항을 제공하는 교체 가능한 프린트 헤드
PHYSICAL CHARACTERISTICS
LxHxW : 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
Weight : 12.85 kg (28.4 lbs)
PRINT SPECIFICATIONS
Max. Print Width : 112 (DT)/110 (TT) mm (4.4/4.3 in)
Max. Length :
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local UHF RFID regulations including FCC and ETSI.
Contact local representative for availability in particular region.
PRINT SPEED
100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 - 250 mm/s (4 - 10 ips) for 406 dpi
MEDIA
Labels & Tags :
Max/Min Width : 120/ 25.4mm (4.72/ 1 in)
Thickness : 2.4 to 10.0 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter : 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Ribbons :
Roll Max Diameter : 80 mm (3.15in), approx. 450m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/ XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless :
IEEE 802.11 b/g
Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAPTTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols : TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PM4i 열전사감열 RFID 바코드프린터 산업용프린터 매뉴얼HION IT
다기능 PM4i는 최신 RFID 기술과 함께 Intermec의 바코드프린터에서 사용자들이 기대해왔던 신뢰성 및 견고성과 함께 뛰어난 성능을 제공합니다.
기업들은 PM4i를 통해 RFID 어플리케이션을 구동시켜 RFID 스마트 라벨을 생성기킬 수 있습니다.
PM4i는 가변 주파수 RFID Tag 를 사용함으로써 전세계에서 사용할 수 있는 라벨 인코딩과 인쇄를 동시에 할 수 있으며, 이를 통해 지역 표준에 따라 달라지는 여러 주파수 Tag 를 읽을 수 있습니다.
PM4i 는 완벽한 프린터 독립성 어플리케이션에 대한 사용자 정의 프로그램을 실행하는 "스마트 클라이언트"의 역할도 할 수 있습니다.
PM4i 프린터는 PC 필요없이 추가적인 하드웨어(예, 스캐너, 다른 프린터, 컨베이어)를 작동시킬 수 있고, 네트워크 호스트로부터 정보에 접근할 수 있으며, 기능 추가를 위한 어플리케이션으로도 변경시킬 수 있습니다.
통합 EasyLAN 이더넷, USB, 직렬 연결은 PM4i와의 기본 인터페이스 입니다.
사용자는 추가적인 EasyLAN 무선 및 산업용 인터페이스 보드를 선택할 수 있습니다.
EasyLAN 무선 인터페이스는 통합 표준 802.11b 무선 통신을 사용합니다.
네트워크를 통해 이 무선 통신은 중계된 정보의 128-bit WEP 암호화를 제공합니다.
Intermec의 유선 및 무선 기술은 보안 인쇄와 모든 환경에 대한 네트워크 인프라를 보장합니다.
PM4i 바코드프린터는 공급망 전체에 걸쳐 신속하고 정확한 데이터 수집을 위해 모든 물품들이 RFID를 통해 라벨이 주어지고, 추적된다는 것을 보장하며, 제조업, 창고업 및 물류업 용도에 적합하도록 설계되었습니다.
향후 RFID 표준으로서의 UHF Gen 2를 지원
향후 RFID 표준 발전을 지원하기위한 고유 제품기능으로 고객 투자보호
주파수 가변 UHF Tag를 인코딩하는 최초의 RFID 프린터
바코드, 판독 가능한 택스트, 그래픽을 동시인쇄
독립형 프린터 어플리케이션 지원
통합 EastLAN 이더넷, USB, 직렬 인터페이스 표준
EasyLAN 무선 인터페이스(옵션)
DESCRIPTION
Direct thermal and thermal transfer label, ticket and tag printer. Also available with RFID.
PHYSICAL CHARACTERISTICS
LxHxW : 543 x 261 x 298mm (21.38 x10.28 x 11.73 in)
Weight : 13.5 kg (29.76 lbs.)
PRINT SPECIFICATIONS
Max. Width : 104 mm (4.09 in) at 203 dpi and 406dpi; 105.7 mm (4.16 in) at 300 dpi.
Max. Length : 4095 mm (161.2 in) at 203 dpi; 2730 mm (107.5 in) at 300 dpi. 1016 mm (40 in) at 406 dpi.
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC Class 1 Generation 2, 865-928 MHz radio configured to comply with local UHF FID regulations including FCC and ETSI. Contact local representative for availability in particular regions.
PRINT SPEED
100 - 200 mm/s (4 - 8 ips) variable (203 dpi)
100 - 150 mm/s (4 - 6 ips) variable (300/406 dpi)
PRINT RESOLUTION
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
MEDIA
Type : Labels and Tags
Max/Min Width : 114.3 /25.4 mm (4.5 /1 in)
Thickness : 2.5 to 8.7 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diamete r: 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 82 mm (3.2 in), approx. 450m
Core ID : 25.4 mm (1 in)
Type : Wax, mid-range, resin
MEMORY
Standard : 16MB Flash memory, 32MB SDRAM, 1 Compact Flash slot
Available : 1GB CompactFlash memory, multi-GB USB memory device (FAT16/FAT32 USB drivers supported)
POWER SUPPLY
AC Voltage : 90 to 265 VAC, 45 to 65Hz
PFC Regulation : IEC 61000-3-2
Power Consumption : Standby 15W; Peak 300W
OPERATING ENVIRONMENT
Ambient Operating Temperature : +5°C to +40°C (+41°F to +104°F)
Storage Temperature : -20°C to +70°C (-4°F to +152°F)
Humidity : 20 to 80% non-condensing
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PF2i PF4i 열전사감열 바코드프린터 산업용프린터 매뉴얼HION IT
컴팩트한 PF2i, PF4i 미드 레인지 바코드프린터는 인터맥의 스마트하고 강하고 안전한 산업용 프린터 제품입니다.
Intermec SmartSystems ™ 및 Wavelink Avalanche ™를 통해 PF2i의 통합 장치관리 및 진단 기능은 가동 중단 시간을 줄이고 설치를 단순화합니다
견고한 All-Metal PF2i 바코드프린터는 다운 타임을 줄이고 유지 보수 비용을 최소화하는 기능을 통합합니다.
작은 크기에도 불구하고 PF2i는 풀 사이즈 라벨 롤 (최대 8.4 in / 213 mm)을 사용하여 용지 교체 횟수를 줄입니다.
QuickMount ™ 프린트 헤드 디자인 덕분에 프린트 헤드를 빠르고 쉽게 교체 할 수 있습니다.
최고 수준의 보안 무선 연결 (WPA2)을 포함한 여러 보안 인터페이스 옵션을 사용할 수 있습니다.
업계 유일의 프린터인 WiFi- 및 CCX-Certification과 함께 사용할 수있는 인터맥 산업용 프린터는 무선 네트워크 무결성을 유지하고 구성 시간을 단축시킵니다.
모든 프린터는 이더넷 연결 및 출현하는 네트워크 프로토콜 IPv6과 함께 제공되므로 장기간의 엔터프라이즈 확장성을 보장합니다.
기타 연결 옵션 - 표준 RS232 및 USB 포트, 옵션 병렬, 이중 직렬 또는 산업용 인터페이스는 통합 유연성을 추가로 제공합니다.
Strong, all-metal construction and superior throughput for harsh industrial environments
Compact size fits space- constrained applications
Smart Printing capabilities support stand-alone printer applications, eliminating PC expense and complexity
All-in-one, user-selectable printer languages Fingerprint/Direct Protocol (DP), IPL, ZSim and DSim in every printer
Secure wireless connectivity : CCX and WiFi® certified with WPA2
Integrated Ethernet, USB host and device, and serial interface standard
Internet Protocol v6 (IPv6) support
PHYSICAL CHARACTERISTICS
Length : 397 mm (15.6 in)
Height : 178 mm (7 in)
Height (big top) : 205 mm (8.1 in)
Width : 194 mm (7.6 in)
Weight : 5.5 kg (12 lbs.)
PRINT SPECIFICATIONS
Max. Width: 56 mm (2.2 in)
Max. Length: 4095 mm (161.2 in)
Print Speed : 100 ? 200 mm/s (4 - 8 ips) variable
Print Resolution : 8 dots/mm (203 dpi)
MEDIA
Type : Labels & Tags
Max/ Min Width : 60/25.4 mm (2.36/1 in)
Thickness : 3.0 to 7.5 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter (long door): 152.4 mm (6 in)
Label Roll Max Diameter (short door): 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 65 mm (2.56 in), approx. 225m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop
Wireless:
IEEE 802.11 b/g
Wi-Fi Certified, CCX (Cisco®) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAP- TTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols :
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 INTERMEC PD43 PD43c 2D 열전사 산업용 바코드프린터 매뉴얼HION IT
경공업 (Light Industrial) 산업에 적합한 열전사 인쇄타입의 PD43, PD43c 바코드 프린터는 설치공간이 협소한 얕은 조리대 및 인출 타입의 캐비넷 공간에서의 설치사용이 용이한 혁신적인 인쇄 성능을 제공합니다.
인터맥 PD43, PD43c 바코드 프린터 물류센터 및 배송센터, 물류창고, 항공기내 승객서비스 등에 적합하며, 외형은 금속재질, 강력한 캐스트알루미늄 인쇄 메커니즘, 프린터 헤드 및 롤러 교체시 도구 필요없어 다운타임을 최소화 하도록 설계되었습니다.
Intermec PD43은 호스트 컴퓨터가 없어도 설정을 쉽게 구성, 구성 및 미세 조정할 수있는 컬러 그래픽 디스플레이를 제공합니다.
실제로 스마트 인쇄 기능을 통해 PD43 은 프린터 내부에서 바로 응용 프로그램을 실행할 수 있으므로 연결된 PC가 필요하지 않습니다.
Incredibly Compact: Small footprint for installation into compact tabletops and pull-out cabinets.
Built Strong: Rugged metal chassis and print mechanism provide investment protection.
Easy to Use: Intuitive, ten-language color display or icon interface simplifies setup and maintenance.
uilt-In Command Languages: Fast, friendly and complete printer emulation-including ZSim2, our most comprehensive ZPL-II® emulation ever-makes upgrading from other printer brands easy.
Smart Printer: Run apps right inside the printer, control peripherals, and eliminate the need for a connected PC, using either C# for Printers or Fingerprint.
Maintenance Made Easy: Completely tool-free printhead and platen roller replacement.
Broad Media Compatibility: Supports half- and one-inch ribbon cores, ink-in or ink-out.
Co-Engineered Media: Extensively tested with Intermec co-engineered media products, ensuring optimized performance. Compatible with Honeywell's broad range of media products.
Available Accessories: Customize with a wide range of available accessories such as a Wi-Fi/Bluetooth® module and cutter.
PHYSICAL CHARACTERISTICS
Length ;
PD43 with Standard Door : 470 mm (18.5 in)
PD43 with Flat Top Door : 470 mm (18.5 in)
PD43c : 236 mm (9.3 in)
PD43c with Optional External Media Holder : 432 mm (17.0 in)
Width ;
PD43 with Standard Door : 211 mm (8.3 in)
PD43 with Flat Top Door : 211 mm (8.3 in)
PD43c : 211 mm (8.3 in)
PD43c with Optional External Media Holder : 211 mm (8.3 in)
Height ;
PD43 with Standard Door : 249 mm (9.8 in)
PD43 with Flat Top Door : 209 mm (8.2 in)
PD43c : 205 mm (8.1 in)
PD43c with Optional External Media Holder : 217 mm (8.5 in)
Weight ;
PD43 with Standard Door : 8.4 kg (18.5 lbs)
PD43 with Flat Top Door : 8.3 kg (18.3 lbs)
PD43c : 5.1 kg (11.2 lbs)
PD43c with Optional External Media Holder : 6.0 kg (13.2 lbs)
PRINT SPECIFICATIONS
Max Print Width : 104 mm (4.1 in)
Print Speed : 203 mm/s (8.0 ips) @ 8.0 dpmm (203 dpi), 152 mm/s (6.0 ips) @ 11.8 dpmm (300 dpi)
Resolution : 8.0 dpmm (203 dpi), 11.8 dpmm (300 dpi)
Media Compatibility
Max. Media Diameter (OD) ;
PD43 with Standard Door : 213 mm (8.375 in)
PD43 with Flat Top Door : 152 mm (6.0 in)
PD43c with External Media Holder : 203 mm (8.0 in)
Media Core Sizes (ID) : 1, 1.5, 3 in
Media Width : 19 mm (0.75 in) to 118 mm (4.65 in)
Label Length : 6.4 mm (0.25 in) to 172.7 cm (68.0 in)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
3. - i -
Revision History
Version Release Time Description
1.0 November 2012 Initial release
1.1 November 2013
To cover the use of the wall-mount cradle,
Appendix D. Wall-mount Cradle (Optional) is
added to the manual.
The computer newly supports Windows 8.1,
which gives rise to the change in section 2.4.
Install Driver Utilities.
5. - iii -
Contents
Revision History.............................................................................................i
Contents........................................................................................................iii
Preface...........................................................................................................v
Copyright Notice...................................................................................................v
Declaration of Conformity.....................................................................................v
CE..................................................................................................................v
FCC Class B..................................................................................................v
RoHS............................................................................................................vi
SVHC / REACH...........................................................................................vii
Important Safety Instructions..............................................................................vii
General Cleaning Tips....................................................................................... viii
Introducing the Rechargeable Battery Pack.........................................................x
Disposing of Your Old Product..............................................................................x
Symbols Description............................................................................................xi
About User’s Manual............................................................................................xi
Warning...............................................................................................................xii
Additional Information Technical Support........................................................xii
Warranty..............................................................................................................xii
Chapter 1 - General Information...................................................................1
1.1. Packing List....................................................................................................2
1.2. Ordering Information......................................................................................2
1.2.1. Optional Accessories...........................................................................3
1.2.2. Optional Configuration (Configure to Order Service)...........................3
1.3. Specifications.................................................................................................4
Chapter 2 - Getting Started...........................................................................7
2.1. Dimensions....................................................................................................8
2.2. Tour the Computer.........................................................................................9
2.3. Replace Batteries.........................................................................................13
2.4. Install Driver Utilities.................................................................................17
2.4.1. Installation Sequence........................................................................18
2.4.2. Start to Install.....................................................................................18
2.4.3. Install CPU Driver (Windows XP only)...............................................22
2.4.4. Install DirectX 9.0c Driver..................................................................24
2.4.5. Install VGA Chipset Driver..............................................................26
2.4.6. Install .NET Framework 4.0 Driver.....................................................28
2.4.7. Install Audio Driver.............................................................................30
2.4.8. Install LAN Driver...............................................................................32
2.4.9. Install Touch Screen Driver................................................................34
2.4.10. Install Digitizer Driver.......................................................................36
2.4.11. Install WiFi Driver.............................................................................38
2.4.12. Install Function-Keys Driver.............................................................40
2.4.13. Install Bluetooth Driver Utility.......................................................42
2.4.14. Install RS-232 Driver........................................................................44
2.4.15. Install Camera Driver.......................................................................46
Contents
6. - iv -
Contents
2.4.16. Install 3G Driver Utility (Configure-to-Order)................................48
2.4.17. Install Cradle LAN Driver (Optional)................................................50
2.4.18. Install RFID Reader Driver (Configure-to-Order).............................53
2.4.19. Install AHCI Driver...........................................................................55
Chapter 3 - Utilities......................................................................................59
3.1. Function Key Configuration..........................................................................60
3.2. RFID (Optional)............................................................................................63
3.3. Bluetooth......................................................................................................67
3.4. Camera........................................................................................................68
3.5. PenMount Control Panel..............................................................................71
3.6. PenMount Gesture.......................................................................................76
3.7. HSUPA (Optional)........................................................................................80
Chapter 4 - BIOS..........................................................................................81
4.1. BIOS Main Setup.........................................................................................82
4.2. Advanced Settings.......................................................................................84
4.2.1. ACPI Settings.....................................................................................85
4.2.2. CPU Configuration.............................................................................86
4.2.3. IDE Configuration..............................................................................88
4.2.4. USB Configuration.............................................................................89
4.3. Chipset.........................................................................................................90
4.3.1. North Bridge.......................................................................................91
4.3.2. South Bridge......................................................................................95
4.4. Boot Settings..............................................................................................101
4.5. Security......................................................................................................102
4.6. Save Exit................................................................................................104
Appendix....................................................................................................107
A. Battery Charger (Optional)...........................................................................108
A.1 Specifications.....................................................................................108
A.2. Overview.............................................................................................109
A.3. Dimensions.........................................................................................110
A.4. How to Use.........................................................................................110
B. Shoulder Strap (Optional).............................................................................113
C. SIM Card (Configure-to-Order).....................................................................114
D. Wall-mount Cradle (Optional).......................................................................115
D.1. Status LED ........................................................................................116
D.2. Speaker..............................................................................................116
D.3. Seat/Dismount the Computer.............................................................117
D.4. Charge Batteries................................................................................119
D.5. Charge A Spare Battery.....................................................................121
D.6. Network with Other Devices...............................................................123
7. - v -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certificate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specifications when
shielded cables are used for external wiring. We recommend the use of shielded
cables. This kind of cable is available from ARBOR. Please contact your local
supplier for ordering information.
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
Preface
8. - vi -
Preface
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RoHS
ARBOR Technology Corp. certifies that all components in its products are
in compliance and conform to the European Union’s Restriction of Use of
Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed
a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is defined as
a substance or mixture of substances with uniform composition (such as solders,
resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-96.5%),
Ag(3.0-3.5%) and Cu(0.5%)).
9. - vii -
Preface
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby confirms all products comply with the restriction of SVHC
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC 0.1 % by weight (1000 ppm)
Important Safety Instructions
Read these safety instructions carefully
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. Disconnect this equipment from theA/C outlet before cleaning it. Use a moist
cloth. Do not use liquid or sprayed detergent for cleaning.
7. To fully disengage the power to the unit, please disconnect the power from
the AC outlet.
8. Do not scratch or rub the screen with a hard object.
9. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,
Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh
chemicals may cause damage to the cabinet and the touch sensor.
10. Remove dirt with a lightly moistened cloth and a mild solvent detergent.
Then wipe the cabinet with a soft dry cloth.
11. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
12. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
13. If the equipment will not be used for a long time, disconnect it from the power
10. - viii -
Preface
source to avoid damage by transient overvoltage.
14. Never pour any liquid into openings. This may cause fire or electrical shock.
15. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
16. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according
to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
17. The sound pressure level at the operator’s position, according to IEC 704-
1:1982, is no more than 70dB(A).
18. Keep this User’s Manual for later reference.
19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW
-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE
EQUIPMENT.
General Cleaning Tips
You may need the following precautions before you begin to clean the device.
When you clean any single part or component for the device, please thoroughly
read and understand the details below.
1. We strongly recommended that you should shut down the system before
you start to clean any single components.
2. When you need to clean the device, please rub it with a piece of dry cloth.
3. Be cautious of the tiny removable components when you use a vacuum
cleaner to absorb the dirt on the floor.
4. Never drop the components inside the device or get circuit board damp or
wet.
11. - ix -
Preface
5. Be cautious of all kinds of cleaning solvents or chemicals when you use it
for the sake of cleaning. Some individuals may be allergic to the ingredients.
6. Try not to put any food, drink or cigarette around the device.
Cleaning Tools
Although many companies have created products to help improve the process
of cleaning your devices and peripherals, users can also use household items to
clean their devices and peripherals. Below is a listing of items you may need or
want to use while cleaning your devices or peripherals. Keep in mind that some
components in your device may only be able to be cleaned using a product
designed for cleaning that component, if this is the case it will be mentioned in
the cleaning.
• Cloth: A piece of cloth is the best tool to use when rubbing up a component.
Although paper towels or tissues can be used on most hardware as well, we
still recommend you to rub it with a piece of cloth.
• Water or rubbing alcohol: You may moisten a piece of cloth a bit with some
water or rubbing alcohol and rub it on the device. Unknown solvents may be
harmful to the plastics parts.
• Vacuum cleaner: Absorb the dust, dirt, hair, cigarette particles, and other
particles out of the device can be one of the best cleaning methods. Over
time, these items can restrict the airflow in a device and cause circuitry to
corrode.
• Cotton swabs: Cotton swaps moistened with rubbing alcohol or water are
excellent tools for wiping hard to reach areas in your keyboard, mouse, and
other locations.
• Foam swabs: Whenever possible, it is better to use lint-free swabs such as
foam swabs.
We recommend you to follow the cleaning steps:
1. Close all application programs
2. Close operating software
3. Turn off power switch
4. Remove all peripherals
5. Pull out power cable
12. - x -
Preface
Introducing the Rechargeable Battery Pack
With very little care, you can maximize the life and lifespan of your G1056 battery.
Most importantly, only use your G1056 in its ideal operating temperature (See
“G1056 Specifications”) – do not leave it in a hot trunk during the summer.
• Important Terms to Understand
“Battery life” means the time your G1056 will run before it must be recharged
(sometimes this is also called “playtime” or “runtime”).
“Battery lifespan” means the total amount of time your battery will last before
it must be replaced.
• Using Your G1056 for the First Time
Be sure to fully charge (approx. 4 hours) your G1056 when you plug it in for
the first time.
• Long-Term Storage Maintenance
If you do not plan to use your G1056 battery for more than three months, it is
recommended that you store the battery separately, fully charged, and then
recharge it every three month. If you store an uncharged battery, it could fall
into a deep worn-out state which would render it incapable of holding any
charge. Be sure to store your G1056 and battery at the proper temperature.
(See “G1056 Specifications.”)
• Battery Lifespan
The removable batteries for G1056 are designed to retain up to 80% of their
original capacity after 300 charging and recharging cycles when properly
maintained. You may choose to replace your battery when it no longer holds
sufficient charge to meet your needs.
Disposing of Your Old Product
• Within the European Union
EU-wide legislation, as implemented in each Member State,
requires that waste electrical and electronic products carrying the
mark (left) must be disposed of separately from normal household
waste.
This includes monitors and electrical accessories, such as signal
cablesorpowercords.Whenyouneedtodisposeofyourdisplayproducts,please
13. - xi -
Preface
follow the guidance of your local authority, or ask the shop where you
purchased the product, or if applicable, follow any agreements made between
yourself. The mark on electrical and electronic products only applies to the
current European Union Member States.
• Outside the European Union
If you wish to dispose of used electrical and electronic products outside the
European Union, please contact your local authority so as to comply with the
correct disposal method.
Symbols Description
This symbol of “CAUTION” indicates that there is a danger of
injury to the user or a risk of damage to the product, should
warning notices be disregarded.
Battery Recycle
This symbol indicates electrical warning.
Change of electric current:
Internal: positive current
External: negative current
About User’s Manual
This User’s Manual is intended for experienced users and integrators with
hardware knowledge of personal computers. If you are not sure about any
description in this User’s Manual, please consult your vendor before further
handling.
14. - xii -
Preface
Warning
Any changes or modifications not expressly approved by the guarantee of this
device could void the user’s authority to operate the equipment.
Additional Information Technical Support
You can download the related technical documents such as datasheet and user’s
manual as well as driver on our website.
Please do not hesitate to call or e-mail our customer service when you still cannot
get the information you need.
http://www.arbor.com.tw
E-mail: info@arbor.com.tw
Warranty
This product is warranted to be in good working order for a period of one year
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modifications, accident or disaster.
Vendor assumes no liability for any damages, lost profits, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and fitness for a particular
purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty
gives you specific legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.
15. - 1 -
1Chapter 1
General Information
Chapter 1 - General Information
16. - 2 -
General Information
1.1. Packing List
1 x G1056
User’s Manual, Driver DVD
1 x Power Adapter
1 x Digitizer Pen
External Battery
2 x Black 2500mAh External Battery Kits
Before up and running, please make sure the package contains all of above
accessories. If any of the above items is damaged or missing, contact your vendor
immediately.
1.2. Ordering Information
G1056
10.4 AMD Fusion™ APU G-T56N rugged tablet PC with
WiFi, Bluetooth, Digitizer and Rear Camera
The following items are normally optional, but some vendors may include
them as a standard package, or some vendors may not carry all the items.
17. - 3 -
General Information
1.2.1. Optional Accessories
eBATB-1056 R1.0
Black 2500mAh External Battery Kit
PEN-1056
Battery-free Digitizer Pen Kit
SST-1056
128*3.7cm, Shoulder Strap
CHR-1056
Battery Charger for G1056
WMC-1056
Wall-mount Cradle for G1056
1.2.2. Optional Configuration (Configure to Order Service)
CAMF50-1056
5.0M Front CMOS Camera Kit
RFID-1056
13.56MHz RFID Kit
HSUPA-1056
3.75G HSUPA Wireless Kit
18. - 4 -
General Information
1.3. Specifications
System
CPU AMD Fusion™ APU G-T56N 1.65GHz processor
Graphics
Controller
AMD Radeon™ HD 6320
Memory 4GB DDR3 SO-DIMM memory module installed
Chipset AMD Platform Control Hub A50M
BIOS AMI Aptio®
UEFI BIOS
Audio
1 x Integrated microphone
2 x Integrated 2W speakers
1 x Earphone jack
Storage 1 x 32GB 1.8” SATA SSD installed
Peripherals Devices
Serial Port 1 x RS-232 (optional, sharing the same location with the VGAport)
Camera
1 x 5.0 megapixel front AF CMOS camera (optional)
1 x 5.0 megapixel rear AF CMOS camera
USB Port 4 x USB 2.0 ports
Ethernet 1 X RJ45 GbE LAN
RFID
Integrated 13.56MHz, ISO 15693/14443A/14443B RFID Reades
(optional)
Wi-Fi Integrated WLAN 802.11 a/b/g/n
Bluetooth Integrated Bluetooth 2.1 + EDR
GSM/UMTS
Integrated HSUPA module (3.75G) for GSM/GPRS/EDGE, EV-
DO networks (optional)
Expansion 1 x 35-pin pogo connector for docking connection
Video Port 1 x VGA, 1 x mini Displayport
Button Indicator
Function Key 1 x 5-way function key
Power Button 1 x Power on/off button
LED* 4 x LEDs (Power, Battery Status, Wi-Fi/RFID, Bluetooth)
*Note: See 2.2. Tour the Computer for more information concerning Status LEDs and
function keys.
19. - 5 -
General Information
LCD Display
Size/Type 10.4 AFFS+ TFT Active Matrix Panel
Max. Resolution 1024 (H) x 768 (V)
Luminance 340 cd/m²
Contrast Ratio 600:1
Viewing Angle 178° (H) / 178° (V)
Backlight Type LED
Touch Screen
Type Analog Resistive
Controller Interface USB Interface
Digitizer Electromagnetic digitizer with batter-free pen
Power Supply
Adapter Input 100 ~ 240VAC (Full Range)
Adapter Output 19VDC, 4.74A, 90W
Battery Type Li-battery pack
Battery Capacity 2 x 2500mAH 4-cell external battery packs
Battery Operating
Time
6 hours
Mechanical Environmental
Discharging Temp. -20 ~ 40ºC (-4 ~ 104ºF)
Charging Temp. 0 ~ 40ºC (32 ~ 104ºF)
Storage Temp. -20 ~ 60ºC (-4 ~ 140ºF)
Storage Humidity 5 to 25% (non-condensing)
Dimensions
(W x D x H)
266.8 x 257.7 x 67.7 mm (10.5 x 10.1 x 2.7)
Gross Weight 1.8 kg (3.9 lb)
Vibration 3 Grms/ 5 ~ 500Hz/ random operation
Shock 40G peak acceleration (11 ms duration)
Transit Drop 90cm (3ft.), except the front side
IP Rating IP54 (Front panel only)
Regulatory CE/FCC Class B, VCCI certified
21. - 7 -
2Chapter 2
Getting Started
Chapter 2 - Getting Started
22. - 8 -
Getting Started
2.1. Dimensions
53.5276.3
274.9
75.8
Unit: mm
23. - 9 -
Getting Started
2.2. Tour the Computer
This section will familiarize you with the computer by guiding through the external
components.
Front Side
Function Keys
Mic
RFID Sensor (optional)
Power Button
4 LEDs
(Power,
Bluetooth,
Wireless,
Battery Status)
5-way Function Key
Integrated 2W Speakers
Front Camera (optional)
Power ON/OFF: the power button to turn on/off the PC (must hold the buttons
for about 2 seconds)
Function Keys
The four function keys (F1 ~ F4) and 5-way function key on front panel are
available after users successfully install all necessary drivers. These keys can
also be re-defined by users. Should you want to change its settings, refer to
Section 2.7.1 for details.
Key Default Function
F1 Bluetooth On/Off
F2 WiFi On/Off
F3 On-screen Keyboard On/Off
24. - 10 -
Getting Started
F4 Display Arbor System Suite Setup
▲ Lock Screen
▼ Adjust Volume
◄ Show Battery WiFi Status
► Camera On/Off
● Adjust Brightness
Status LEDs
On the right side are 4 system status LEDs. They have different meanings
individually. From top to bottom, they are:
LED Color Description
Power Green illuminated as the tablet is turned on
Bluetooth Blue illuminated as Bluetooth is activated
WiFi Green illuminated as WiFi is activated
Battery Green-Red check the next table
To be more specific, the Battery indicator’s color varies according this table:
Power Left / Indicator Color Status
0% ~ 15% 16% ~ 49% 50% ~ 99% 100%
Discharger
w/o Adapter
Solid Red Solid Orange Solid Green
Charger
w/ Adapter
Flashing Red
Flashing
Orange
Flashing Green Solid Green
25. - 11 -
Getting Started
Rear Side
Hand Strap
Battery 1Battery 2
Auto Focus
CMOS Camera
Rear Camera
Left Right Sides
4 x USB
2.0 Ports
DC-In
RJ45
Air Inlet
Phone Jack
Air Outlet
VGAor RS-232
mini
Displayport
shoulder strap
ringshoulder strap
ring
26. - 12 -
Getting Started
Bottom Side
35-pin Pogo Connector
27. - 13 -
Getting Started
2.3. Replace Batteries
The tablet PC is equipped with two rechargeable 4S1P external batteries.
When you want to replace the external battery, follow these steps:
1. Disconnect the DC power plug; turn off the computer (the tablet PC allows
to replace one of the battery directly when another still has enough power
without the need to shut G1056 down).
2. Remove any peripheral devices connected to G1056.
3. Press two battery locks as arrows direct.
4. Place another battery into battery compartment in right direction and redo
the procedure.
28. - 14 -
Getting Started
Instructions for Rechargeable Battery Pack
How to recharge:
• To recharge the lithium-ion battery, install it into the rugged PC and then
connect the power adapter to the power input plug of the rugged PC.
• The battery will be fully charged within 3-4 hours (depending on the capacity
of the battery). When finished charging, the power indicator on the front
panel will turn from blinking light to steady green and then it’s recommended
to remove the adapter from the computer.
• It’s recommended not to recharge intermittently, which means not to plug
and unplug the power adapter frequently in short period of time.
• It’s recommended to turn off the computer before charging.
• Do not use the power adapter that is not made for your computer. Supplying
the computer with inappropriate voltage may cause harm to the battery or,
even worse, burn the computer.
29. - 15 -
Getting Started
power input plug
How to use:
• It’srecommendedtosupplypowerviatheadapterwithoutthebatteryinstalled
when you are to use the rugged PC for a very long time. And reinstall the
battery in the contrary situation.
• The lithium-ion battery is currently one of the most popular battery packs.
The best advantage is that it has no memory effect, so users needn’t worry
about that issue. Users can charge the battery anytime whether it is fully
drained or not. However, it’s recommended that users drain the battery until
the system shows power shortage warning and then recharge the battery.
Doing so is helpful to the reliability of your battery.
• Don’t use the battery pack as a power supply for other equipment.
30. - 16 -
Getting Started
How to store:
• Don’t expose the battery to elevated heat situations such as under direct
sunlight in a car or near fire.
• Don’t disassemble the battery, or the battery leakage might cause skin or eye
injury. If electrolyte leaking from the battery contacts your skin or clothing,
immediately flush it with running water. If it splashes into eye, rinse the eye
at least 15 minutes with clean water and then seek medical attention.
• To avoid battery leakage or explosion, don’t discard the battery into water or
fire, or put them near a heat source such as a gas stove or an oven.
• Use the appropriate container to store the battery such as a paper box. Do
not allow a metal object to touch the terminal of the battery.
• When storing for a long period of time, keep the battery approximately at
the charging state of 60 ~ 80% and regularly use it. The battery should
be completely discharged and recharged once per month to condition the
cells inside the battery and to ensure the battery delivers the most available
capacity.
• The battery consists of precise electrical components and cells. Do not drop
or hit the battery.
31. - 17 -
Getting Started
2.4. Install Driver Utilities
The G1056 supports Windows XP, Windows 7 and Windows 8.1. Find
the necessary device drivers on the CD that comes with your purchase. The
following instructions take Windows 7 as the exemplary OS. Different OS may
vary slightly regarding driver/AP installation, but generally they are similar.
Before running driver CD, prepare a USB keyboard, USB DVD-ROM drive, USB
hub and the power adapter/cable included in the accessory box.
32. - 18 -
Getting Started
2.4.1. Installation Sequence
Always follow the sequence below to install the drivers to prevent errors:
CPU (Windows XP only) → DirectX 9.0c → VGA Chipset →
.NET Framework 4.0 → Audio → LAN → Touch Screen / Digitizer→ Wi-Fi
The other drivers and software can be installed by random sequence as long as
the afore-listed drivers are installed first.
2.4.2. Start to Install
Before installing the drivers (and utilities), prepare the following:
1. a USB keyboard 2. a USB CD-ROM drive
Follow the guideline below to install device drivers and utilities:
1. Connect the computer to external power by the power cable and adapter
included in the accessory box.
power outlet power cable power adapter the computer
33. - 19 -
Getting Started
2. Have the USB CD-ROM drive. Connect the CD-ROM drive to the computer
(, and sometimes the connection to power supply is also needed depending
on the feature of your CD-ROM drive).
Connect the USB
CD-ROM drive to the
computer
Sometimes it is necessary
to connect the USB CD-
ROM drive to power supply
(depending on the feature of
your CD-ROM drive).
3. Power on the computer if it isn’t powered on yet.
4. Insert the driver CD to the CD-ROM drive.
Insert the driver CD to
the CD-ROM drive
In a few seconds, a dialog opens asking whether to auto-run the driver CD
or open the CD contents in Windows Explorer.
34. - 20 -
Getting Started
5. Click/tap Run AUTORUN.EXE to launch the installer, which allows easier
installation of drivers.
The installer then opens.
See 2.4.3. Install CPU Driver (Windows XP only) on page 22 to install
CPU driver (for Windows XP only).
See 2.4.4. Install DirectX 9.0c Driver on page 24 to install Direct 9.0c
driver, which is needed to install VGA Chipset driver.
See 2.4.5. Install VGA Chipset Driver on page 26 to install VGA
Chipset driver.
See 2.4.6. Install .NET Framework 4.0 Driver on page 28 to install .NET
Framework 4.0 driver, which is needed to install function keys driver.
See 2.4.7. Install Audio Driver on page 30 to install Audio driver.
See 2.4.8. Install LAN Driver on page 32 to install LAN driver.
See 2.4.9. Install Touch Screen Driver on page 34 to install resistive
touch driver.
See 2.4.10. Install Digitizer Driver on page 36 to install digitizer touch
driver.
See 2.4.11. Install WiFi Driver on page 38 to install WiFi driver.
35. - 21 -
Getting Started
See 2.4.12. Install Function-Keys Driver on page 40 to install function
keys driver.
See 2.4.13. Install Bluetooth Driver Utility on page 42 to install Bluetooth
driver and the application program.
See 2.4.14. Install RS-232 Driver on page 44 to install RS232 driver.
See 2.4.15. Install Camera Driver on page 46 to run camera codec.
See 2.4.16. Install 3G Driver Utility (Configure-to-Order) on page 48 to
install 3G driver and the application program.
See 2.4.17. Install Cradle LAN Driver (Optional) on page 50 to install
Cradle LAN driver.
See 2.4.18. Install RFID Reader Driver (Configure-to-Order) on page 53
to install RFIC driver and the demo application.
See 2.4.19. Install AHCI Driver on page 55 to install AHCI driver (for
Windows XP and Windows 7 only).
36. - 22 -
Getting Started
2.4.3. Install CPU Driver (Windows XP only)
Note only Windows XP needs to install the CPU driver. If your system runs
Windows 7 or Windows 8.1, skip this section.
To install the CPU driver for Windows XP:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer then opens.
2. Click XP Driver Install.
37. - 23 -
Getting Started
A list of device drivers then opens onscreen.
3. Click/tap the CPU icon .
CPU driver is available in the Windows XP installer only.
4. Follow the onscreen instructions to proceed.
38. - 24 -
Getting Started
2.4.4. Install DirectX 9.0c Driver
Note to install DirectX 9.0c driver before installing VGA Chipset driver. The
VGA Chipset driver cannot be installed without DirectX 9.0c driver being
installed first.
To install DirectX 9.0c driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click/tap the Utilities icon .
The utility list opens onscreen.
39. - 25 -
Getting Started
3. Click/tap the DirectX 9.0c icon .
4. Follow the onscreen instructions to proceed.
40. - 26 -
Getting Started
2.4.5. Install VGA Chipset Driver
To install VGA chipset driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
41. - 27 -
Getting Started
3. Click/tap the VGA Chipset icon .
4. Follow the onscreen instructions to proceed.
42. - 28 -
Getting Started
2.4.6. Install .NET Framework 4.0 Driver
The function key driver cannot be installed without .NET Framework 4.0. Be
sure to install .NET Framework 4.0 first to be able to install the function-keys
driver. (To install the function keys driver, see 2.4.12. Install Function-Keys Driver
on page 40.)
Start to install .NET Framework 4.0:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click/tap the Utilities icon .
The utility list opens onscreen.
43. - 29 -
Getting Started
3. Click/tap the .NET Framework 4.0 icon .
4. Follow the onscreen instructions to proceed.
Note the .NET Framework 4.0 installation takes a while. Please be patient.
44. - 30 -
Getting Started
2.4.7. Install Audio Driver
To install the audio driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
45. - 31 -
Getting Started
3. Click/tap the Audio icon .
4. Follow the onscreen instructions to proceed.
46. - 32 -
Getting Started
2.4.8. Install LAN Driver
To install the LAN driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
47. - 33 -
Getting Started
3. Click/tap the LAN icon .
4. Follow the onscreen instructions to proceed.
48. - 34 -
Getting Started
2.4.9. Install Touch Screen Driver
To be able to use resistive touch control on the computer, the Touch Screen
driver needs to be installed. To install this driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
49. - 35 -
Getting Started
3. Click/tap the Touch Screen icon .
4. Follow the onscreen instructions to proceed.
Note: When installing the touch screen driver, if you think the installation
stops progressing, check the task bar of the operating system to see if
there is any dialog to be managed. See the illustration below:
Once the installation is through, the resistive touch control is ready-to-use. See
3.5. PenMount Control Panel on page 71 to know how to calibrate the touch
screen.
50. - 36 -
Getting Started
2.4.10. Install Digitizer Driver
To be able to use digitizer touch control on the computer, the Digitizer driver
needs to be installed. To install this driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
51. - 37 -
Getting Started
3. Click/tap the Digitizer icon .
4. Follow the onscreen instructions to proceed.
Once the installation is through, the digitizer touch control is ready-to-use.
52. - 38 -
Getting Started
2.4.11. Install WiFi Driver
To install the WiFi driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
53. - 39 -
Getting Started
3. Click/tap the WiFi icon , either WiFi (x64) or WiFi (x86). (Select x64 if
the computer’s got more memory.)
4. Follow the onscreen instructions to proceed.
54. - 40 -
Getting Started
2.4.12. Install Function-Keys Driver
The function key driver cannot be installed without .NET Framework 4.0. Be
sure to install .NET Framework 4.0 first as described in 2.4.6. Install .NET
Framework 4.0 Driver on page 28 to be able to install the function-keys driver.
To install the function keys driver:
1. Install .NET Framework 4.0 driver as described in 2.4.6. Install .NET
Framework 4.0 Driver on page 28 .
2. Run the installer again.
The installer opens onscreen.
3. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
55. - 41 -
Getting Started
4. Click/tap the function keys icon from the driver list.
5. Follow the onscreen instructions to proceed.
Once the installation is through, an ArborFunKey shortcut shows up on the
desktop and also at Start button | All Programs | ArborFunKey | ArborFunKey
and the physical function keys are ready-to-use. See 3.1. Function Key
Configuration on page 60 to know how to use them.
56. - 42 -
Getting Started
2.4.13. Install Bluetooth Driver Utility
To install the Bluetooth driver utility
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
57. - 43 -
Getting Started
3. Click/tap the Bluetooth icon .
4. Follow the onscreen instructions to proceed.
Once the Bluetooth driver and utility are installed, a Bluetooth icon will
show up in the notification area and also the desktop with the Bluetooth feature
enabled. See 3.3. Bluetooth on page 67 to know how to use Bluetooth.
58. - 44 -
Getting Started
2.4.14. Install RS-232 Driver
When the computer you purchase is equipped with an RS-232 port, install the
driver to make it function:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click/tap the Utilities icon .
The utility list opens onscreen.
59. - 45 -
Getting Started
3. Click/tap the RS-232 icon .
4. Follow the onscreen instructions to proceed.
60. - 46 -
Getting Started
2.4.15. Install Camera Driver
To be able to use the camera, the camera codec needs to be run. To run the
camera codec:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click/tap the Utilities icon .
The utility list opens onscreen.
61. - 47 -
Getting Started
3. Click/tap the Camera Codec icon .
4. Follow the onscreen instructions to proceed.
62. - 48 -
Getting Started
2.4.16. Install 3G Driver Utility (Configure-to-Order)
To install the 3G driver and utility:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
63. - 49 -
Getting Started
3. Click/tap the 3G icon .
4. Follow the onscreen instructions to proceed.
5. Once the 3G driver installation is through, proceed to install the application
program, i.e. the utility for 3G connection. Click/tap the 3G AP icon from
the driver list.
6. Follow the onscreen instructions to proceed.
Once the installation is through, an AirCard Watcher shortcut shows
up on the desktop and also at Start button | All Programs | Sierra
Wireless | AirCard Watcher.
See 3.7. HSUPA (Optional) on page 80 to know how to use the 3G module.
64. - 50 -
Getting Started
2.4.17. Install Cradle LAN Driver (Optional)
If you have purchased a cradle for the computer, install the cradle LAN driver
on the computer so the computer is able to network with the cradle’s LAN port.
To install the cradle LAN driver:
1. Connect the cradle to power supply.
power outlet
power cable
power adapter
cradle
2. Seat the computer in the cradle.
65. - 51 -
Getting Started
3. Power on the computer. Launch the driver installer onscreen as described
in 2.4.2. Start to Install on page 18.
The installer opens onscreen.
4. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
66. - 52 -
Getting Started
5. Click/tap the LAN (Cradle) icon .
6. Follow the onscreen instructions to proceed.
67. - 53 -
Getting Started
2.4.18. Install RFID Reader Driver (Configure-to-Order)
If the computer has an RFID reader built in, proceed to install the driver for the
RFID reader:
1. Launch the driver installer onscreen as described in 2.4.2. Start to Install
on page 18.
The installer opens onscreen.
2. Click XP Driver Install to install the driver for Windows XP.
OR Click Win7 Driver Install to install the driver for Windows 7.
OR Click Win8 Driver Install to install the driver for Windows 8.1.
A list of device drivers then opens onscreen.
68. - 54 -
Getting Started
3. Click/tap the RFID icon .
4. Follow the onscreen instructions to proceed.
Once the RFID driver is installed, an RFID NFC Demon shortcut will show
up on the desktop and also at Start button | All Programs | RFID | NFC_Demo |
DemoAP. See 3.2. RFID (Optional) on page 63 to know how to read an RFID
tag using the RFID reader.
69. - 55 -
Getting Started
2.4.19. Install AHCI Driver
The AHCI driver is only needed when the O.S., Windows XP or Windows 7, is
reinstalled. And this driver isn’t needed as well if the O.S. is Windows 8.1.
To install the AHCI driver:
1. Launch the driver installer as described in 2.4.2. Start to Install on page
18.
The installer opens onscreen.
2. Click/tap the Utilities icon .
The utility list opens onscreen.
70. - 56 -
Getting Started
3. Click/tap the AHCI Driver DIsk for Windows XP or AHCI Driver DIsk for
Windows 7 icon .
The AHCI drivers are only available for
Windows XP and Windows 7.
4. Follow the onscreen instructions to proceed.
74. - 60 -
Utilities
3.1. Function Key Configuration
1. Applications in this chapters are based on Windows 7 OS. Some of them
can be replaced by users’ own programs. Ignore parts of these sections
if you prefer your own applications. Once everything is installed properly,
execute ArborFunKey on desktop or under All Programs to configure
function keys. Single-click its icon in system tray to open the program.
75. - 61 -
Utilities
3. You can change their default setting. (See Section 1.6 for individual default
function.) According to the number beside each icon, they are:
1 3G (optional) On/Off
2 Camera On/Off (See Section 2.7.4)
3 Display Arbor System Suite Setup
4 Adjust Brightness
5 Mute
6 WiFi On/Off
7 Lock Screen
8 Show Battery WiFi Status
9 RFID (optional) On/Off
10 *Set Hotkey
11 Bluetooth On/Off
12 Adjust Volume
13 *On-screen Keyboard On/Off
14
User-defined. This is used for setting hotkey of designate .exe, .com,
.bat or .cmd file. Set this button as function key and choose your pre-
ferred file type and file location.
2. From F1-F4 to 5-way function key, choose which one you want to
configure. OK means the central key of 5-way function key.
1
2
3
4
5
6
7
8
9
11
10
12
13
14
turn blue when these devices are on
current
setting
of the
function
key
76. - 62 -
Utilities
*On-screen Keyboard is illustrated below. It is worth mentioning that
Windows 7 also has another built-in monitor keyboard. Touch screen with
digitizer to call the built-in program. Two keyboards don’t conflict when called
at the same time.
*Set Hotkey is different from User-defined. The former means to set one of
function keys as key(s) on keyboard. For instance, you may set F1 as “Ctrl +
C” to replace “copy” operation most software defines.
77. - 63 -
Utilities
3.2. RFID (Optional)
1. Once you've installed RFID driver properly, a software named DemoAP
will appear in All Programs or desktop. This is a test program. You may
install your own RFID program, too. But now, we want to introduce how to
test your RFID function through this application program.
2. In the beginning, the Status column reveals Disconnected.
78. - 64 -
Utilities
3. Turn on RFID by pressing one of the function keys already set as RFID
On/Off (see Section 2.7.1). Select USB_HID as below, and then, Status
will become Connected, meaning your RFID is working.
4. To demo test the RFID, please go to Mode Reader.
80. - 66 -
Utilities
7. You may use a RFID tag to do the demo test.
8. Then, click Start. Information, like UID No, Read Count, Protocol will be
listed in the inventory, plus second number on the right side.
81. - 67 -
Utilities
3.3. Bluetooth
1. After installing bluetooth driver successfully, its icon will appear on
desktop. This is bluetooth program, you may also install your own
program. Turn on bluetooth by pressing one of the function keys already
set as Bluetooth On/Off (see Section 2.7.1) and execute BlueSoleil
Space on desktop.
2. Double-click the central golden ball to start/stop searching for surrounding
bluetooth devices. Wait for seconds. If any device around this PC is
detected, its icon will appear around the central ball. Drag scrollbar to show
more bluetooth devices. Click any detected item and upper icons to execute
further operation.
82. - 68 -
Utilities
3.4. Camera
1. Execute ccdc program in All Programs to test camera function. You may
also install your own camera application. Besides, you can set one of the
functions as Camera On/Off. (See Section 2.7.1)
Rear Camera
Front Camera
(optional)
Set Format Mute
Record Film
Take Picture Close
83. - 69 -
Utilities
2. Press Rear or Front Camera icon to switch between cameras.
3. Press Set Format to set further video format.
84. - 70 -
Utilities
4. Press Record Film or Take Picture icon to execute these works. Files are
saved under ccd folder in Documents.
85. - 71 -
Utilities
3.5. PenMount Control Panel
After everything is installed properly, there will be a touch screen application
named PenMount Control Panel in All Programs. Execute this application.
1. The program consists of 3 tabs. The left one is Device, in it, you can find
how many devices are detected in your system. Select one device icon and
tap Configure, or double tap the device icon for touch screen calibration.
86. - 72 -
Utilities
2. And then another window with Calibrate tab will jump out.
Device Calibration Dialog
A. The Calibrate Tab
This function offers two ways to calibrate your touch screen. ‘Standard
Calibration’ adjusts most touch screens while ‘Advanced Calibration’
adjusts aging touch screens.
a. Standard Calibration
The Standard Calibration function lets you match the touch screen to your
display so that the point you touch is accurately tracked on screen. Standard
Calibration only requires four points for calibration and one point for confir-
mation. Under normal circumstance, Standard Calibration is all you need to
perform an accurate calibration.
1. Please tap the Standard Calibration button to start calibration procedures.
2. After that, the 1st crosshair will appear on white screen. Use your finger
or stylus to touch the red center and hold down until the screen shows the
message - “Lift off to proceed”.
3. The 2nd crosshair follows immediately. Do the process again. After the
fifth red point calibration is complete, the program will jump out automati-
cally, or you may press ESC key to quit it during calibration process. Alter-
natively, doing nothing for a while equates to pressing ESC.
87. - 73 -
Utilities
1st crosshair
b. Advanced Calibration
The Advanced Calibration function improves the accuracy of calibration by
using more involved engineering calculations. Use this function only if you
have tried the Standard Calibration and there is still a discrepancy in the way
the touch screen maps to the display. You can choose 9, 16 or 25 points to
calibrate, though we suggest that you first try 9 points, if it is still not track-
ing well then try 16 or 25 points. The more points you use for calibration, the
greater the accuracy is. Errors in calibration may occur due to viewing angle,
or individual skill, and there may be little difference in using 16 or 25 points.
Note that a stylus is recommended for most accurate results.
Plot Calibration Data
Check this function to have touch panel linearity comparison graph appear
when you finish Advanced Calibration. The black lines reflect the ideal linear-
ity assumed by PenMount’s application program while the blue lines show the
approximate linearity calculated by PenMount’s application program as the
result of user’s execution of Advance Calibration.
Turn off EEPROM storage
Tick this function to disable the write-in of calibration data in Controller.
Please tap the Advanced Calibration button to start calibration procedures
and do the rest as explained in Standard Calibration.
88. - 74 -
Utilities
B. The Edge Compensation Tab
Under the same level where you calibrate your screen, you may find the tab.
This tab is the edge compensation settings for the advanced calibration. You
can adjust the settings from 0 to 30 for accommodating the difference of each
touch panel.
Turn off
EEPROM
storage
Plot Calibration
Data
89. - 75 -
Utilities
3. Press OK to close former window and back to upper level. As mentioned
before, the program consists of 3 tabs, and the central one is Tool, switch
to it.and click Draw to test PenMount touch screen operation.
90. - 76 -
Utilities
1. Now that this tablet PC supports touchscreen function, you may take
advantage of that to set hotkey or do other settings. Single-click a small
icon like a monitor in system tray. If it's absent, you can recall it from All
Programs. The default setting is inactive, so you need to click Gesture
Setting to start the program.
3.6. PenMount Gesture
91. - 77 -
Utilities
2. Check “Enable” and click the upward arrow in red square. You may also
disable gesture function by canceling “Enable” box.
3. And then another Gesture Select window will pop up. Each mark in this
menu represents your gesture on screen. For example, the upward arrow
indicates that you move your finger across the touch screen from bottom
to top. The rest are similar. You may use your gesture applied on the
touchscreen to do further configuration. Select a gesture you would like to
define.
92. - 78 -
Utilities
4. Then again, choose Hot Key, Action or Application to set each gesture’s
corresponding function. You may disable respective gesture, too. And
remember to press Apply after all.
94. - 80 -
Utilities
3.7. HSUPA (Optional)
1. After everything is installed successfully, AirCard Watcher icon will
appear in All Programs. This is HSUPA program, you may also install
your own program. To use this program, you must install SIM card before
all (see Section 2.5); then, turn on HSUPA by pressing one of the function
keys already set as 3G On/Off (see Section 2.7.1) and execute AirCard
Watcher.
2. Sierra Wireless AirCard Watcher Connection Manager software connects
you to the Internet with a single click, and keeps you informed of your
wireless connection , location and other information using clear indicators
for modem status, network status, and more.
96. - 82 -
BIOS
The AMI BIOS provides a setup utility program for specifying the system
configurations and settings which are stored in the BIOS ROM of the system.
When you turn on the computer, the AMI BIOS is immediately activated. After
you have entered the setup utility, use the left/right arrow keys to highlight a
particular configuration screen from the top menu bar or use the down arrow
key to access and configure the information below.
NOTE: In order to increase system stability and performance, our engineering
staff are constantly improving the BIOS menu. The BIOS setup screens and
descriptions illustrated in this manual are for your reference only, and may not
completely match what you see on your screen.
4.1. BIOS Main Setup
97. - 83 -
BIOS
BIOS Information
System Language
Display the BIOS information.
Choose the system default language.
System Time
Set the system time.
The time format is: Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
System Date
Set the system date. Note that the ‘Day’ automatically changes when you set
the date.
The date format is: Day : Sun to Sat
Month : 1 to 12
Date : 1 to 31
Year : 1998 to 2099
98. - 84 -
BIOS
Launch Storage OpROM
Enable or Disable Boot Option for Legacy Mass Storage Devices with Option
ROM.
Launch PXE OpROM
Enable or disable the boot option for legacy network devices.
Legacy OpROM Support
4.2. Advanced Settings
99. - 85 -
BIOS
4.2.1. ACPI Settings
Enable ACPI Auto Configuration
This item allows you to enable/disable ACPI (Advanced Configuration and
Power Interface) Auto Configuration.
The choice: Disabled (Default), Enabled.
Enable Hibernation
Enable or disable the Hibernation function. This allows the operating system
to control power to the computer’s disk, monitor and peripheral devices.
The choice: Enabled (Default), Disabled
ACPI Sleep State
This item allows you to select ACPI Sleep State.
ACPI sleep state enables you to send the system in a low-power consuming
sleep mode.
The choice: Suspend Disabled, S1 (CPU Stop Clock), S3 (Suspend to RAM)
Lock Legacy Resources
S3 Video Repost
Enable or Disable system lock of legacy resources.
Enable or Dsiable S3 Video Repost.
100. - 86 -
BIOS
4.2.2. CPU Configuration
The CPU Configuration setup screen varies depending on the installed
processor.
Limit CPUID Maximum
PSATATE Adjustment
Disabled for Windows XP.
Provide to adjust startup P-state level.
The choice: PState 0, PState 1, PState 2
NX Mode
PSS Support
PPC Adjustment
Enable/Disable No-execute page protection Function.
Enable/Disable the generation of ACPI _PPC, _PPS, and _PCT objects.
Provide to adjust _PPC object.
The choice: PState 0, PState 1, PState 2
103. - 89 -
BIOS
4.2.4. USB Configuration
Legacy USB Support
Enable support for legacy USB. AUTO option disables legacy support if no
USB devices are connected.
The choice: Enabled (Default); Auto; Disabled
EHCI Hand-Off
Allow you to enable support for operating systems without an EHCI hand-off
feature. Do not disable the BIOS EHCI Hand-off option if you are running a
Windows® operating system with USB device.
The choice: Enabled (Default); Disabled
USB hardware delays and time-outs
USB transfer time-out — The time-out value for control, bulk, and interrupt
transfers. Default setting: 20 sec
Device reset time-out — USB mass storage device start unit command time-
out. Default setting: 20 sec
Device power-up delay — Maximum time the device will take before it prop-
erly reports itself to the host controller. ‘Auto’ uses default value: for a Root
port it is 100ms, for a Hub port the delay is taken from hub descriptor. The
choice: Auto (Default); Manual
104. - 90 -
BIOS
This section allows you to configure and improve your system; also, set up
some system features according to your preference.
4.3. Chipset
106. - 92 -
BIOS
GFX Configuration
Primary Video Device
Select Primary Video Device that BIOS will use for output.
NB GPP Core Config
Configure NB GPP Core.
The choice: Disabled, GPP_CORE_x4x4, GPP_CORE_x4x2x2, GPP_
CORE_x4x2x1x1, GPP_CORE_x4x1x1x1x1
Port 4~7 Control
PSPP Policy
Enable/Disable Port 4~7.
Set PCIe speed power policy.
The choice: Disabled, Performance, Balanced-High, Balanced-Low, Power
Saving
107. - 93 -
BIOS
Memory Configuration
DIMM profile
Select DIMM timing profile that should be used.
The choice: Default DIMM profile, XMP profile 1, XMP profile 2
Memory Frequency
Maximum Memory Frequency Selections in Mhz.
The choice: Auto, 1067, 1333, 1600, 1867, 2133
ECC Support
Enable or disable DDR Ecc Support.
110. - 96 -
BIOS
SB SATA Configuration
OnChip SATA Channel
Enable/Disable Serial ATA.
OnChip SATA Type
SATA IDE Combined Mode
The choice: Native IDE, RAID, AHCI, Legacy IDE, IDE→AHCI, AHCI as
ID 0x4394, IDE→AHCI as ID 0x4394
Enable/Disable SATA IDE Combined Mode.
OnChip IDE mode
SATA ESP on PORT0~5
SATA Power on PORT0~5
OnChip IDE mode Select.
The choice: Legacy mode, Native mode
Enable/Disable SATA ESP on PORT0~5.
Enable/Disable SATA Power on PORT0~5 .
The choice: Enabled, Power Down
111. - 97 -
BIOS
OHCI HC (Bus 0 Dev 18/19/22/20 Fn 0/5)
USB Device Wakeup From S3 or S4
Enable/Disable OHCI HC (Bus 0 Dev 18/19/22/20 Fn 0/5).
Enable/Disable USB Device Wakeup From S3 or S4.
USB PORT 0~13/FL0~1
Enable/Disable USB PORT 0~13/FL0~1.
SB USB Configuration
112. - 98 -
BIOS
SB GEC Configuration
In-Chip NIC
GEC OPROM
Enable/Disable In-Chip NIC.
Enable/Disable GEC OPROM.
GEC Resume Wake from S5
Enable/Disable GEC Resume Wake from S5.
113. - 99 -
BIOS
SB GPP Port Configuration
SB GPP Function
NB-SB PHY PLL Power Down
Hide Unused GPP Ports
Enable/Disable SB GPP Function.
Enable/Disable NB-SB PHY PLL Power Down.
Enable/Disable Hide Unused GPP Ports.
GPP Port Link Configuration
SB GPP PHY PLL Power Down
Select GPP Port Link Configuration.
Enable/Disable SB GPP PHY PLL Power Down.
114. - 100 -
BIOS
SB HD Azalia Configuration
HD Audio Azalia Device
SDINO~3 PIN Config
Azalia Front Panel
The choice: Auto, Disabled, Enabled
The choice: GPIO, Azalia
The choice: Auto, Disabled
HD Onboard PIN Config
Azalia Snoop
The choice: Disabled, Enabled
The choice: Disabled, Enabled
115. - 101 -
BIOS
The Boot menu items allow you to change the system boot options.
Boot Configuration
Bootup NumLock State
This setting determines whether the Num Lock key should be activated at
boot up.
4.4. Boot Settings
Quiet Boot
Fast Boot
This allows you to select the screen display when the system boots.
Enable/Disable boot with initialization of a minimal set of devices required to
launch active boot option. Has no effect for BBS boot options.
GateA20 Active
This item is to set the Gate A20 status.
116. - 102 -
BIOS
Hard Drive BBS Priorities
This allows you to set the hard drive boot priority. The BIOS will attempt to
arrange the hard disk boot sequence automatically. You can also change the
booting sequence. The number of device items that appears on the screen
depends on the number of devices installed in the system.
4.5. Security
Option ROM Messages
This item is to set display mode for Option ROM.
Interrupt 19 Capture
When enabled, it allows the optional ROM to trap interrupt 19.
Boot Option Priorities
Select the boot sequence of the hard drives.
117. - 103 -
BIOS
Administrator Password
Use the Administrator Password to set or change a administrator password.
ENTER PASSWORD
Type the password, up to eight characters in length, and press Enter. The
password typed now will clear any previously entered password from CMOS
memory. You will be asked to confirm the password. Type the password again
and press Enter. You may also press ESC to abort the selection and not
enter a password.
To disable a password, just press Enter when you are prompted to enter
the password. A message will confirm the password will be disabled. Once
the password is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED
When a password has been enabled, you will be prompted to enter it every
time you try to enter Setup. This prevents an unauthorized person from
changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the BIOS to
request a password every time your system is rebooted. This would prevent
unauthorized use of your computer.
You can determine when the password is required within the BIOS Features
Setup Menu and its Security option. If the Security option is set to “System”,
the password will be required both at boot and at entry to Setup. If it’s set to
“Setup”, prompting only occurs when trying to enter Setup.
118. - 104 -
BIOS
4.6. Save Exit
Save Changes and Exit
Discard Changes and Exit
Pressing Enter on this item and it asks for confirmation:
Save configuration changes and exit setup?
Pressing OK stores the selection made in the menus in CMOS - a special
section of memory that stays on after you turn your system off. The next
time you boot your computer, the BIOS configures your system according to
the Setup selections stored in CMOS. After saving the values the system is
restarted again.
Exit system setup without saving any changes.
ESC key can be used for this operation.
119. - 105 -
BIOS
Boot Override
Restore Defaults
This group of functions includes a list of tokens, each of them corresponding
to one device within the boot order. Select a drive to immediately boot that
device regardless of the current boot order.
Restore system to factory default.
Pressing Enter on this item and it asks for confirmation prior to executing
this command.
122. - 108 -
Appendix
A. Battery Charger (Optional)
Except G1056 itself, you may also charge batteries via battery charger. The
CHR-1056 comes in as an accessory option for G1056. You can charge more
4S1P external batteries via this battery charger. Go through this section to find
out more about CHR-1056.
A.1 Specifications
Features Peripherals
Color Material Gray, Plastic
I/O Ports 1 x DC Plug (Back side)
Mechanical Environmental
Charging Temp. 0 ~ 40ºC (32 ~ 104ºF)*
Storage Temp. -20 ~ 60°C (-4 ~ 140°F)
Operating Humidity 5 to 95% (non-condensing)
Dimensions
(W x D x H)
101 x 121 x 46.1 mm (3.97” x 4.76” x 1.81”)
Weight (Net) 0.30 kg (0.66 lb)
Vibration 1 Grms/ 5 ~ 500Hz/ random operation
Shock 10G peak acceleration (11 ms duration)
Power
Requirement 19V, DC In
Ordering Information
CHR-1056 Dual Bay External Battery Charger for Gladius G1056
Note: Practically, the charger can operate within the range of -10 to 45ºC,
but will malfunction over 45ºC. When that occurs, you must put it in
the environment lower than 35ºC, or it can’t normally work again.
Similarly, this charger stops working below -10ºC and is able to
re-operate when it’s warmer than -10ºC.
Battery
Capacity
Indicator Color Status
0% ~ 19% 20% ~ 69% 70% ~ 94% 95% ~ 100%
Charging Solid Red Flashing Red Flashing Green Solid Green
123. - 109 -
Appendix
A.2. Overview
• When charging bat-
teries, simply insert
the same adapter for
G1056 into the DC-IN
Jack.
124. - 110 -
Appendix
A.3. Dimensions
Unit: mm
A.4. How to Use
Follow subsequent guide to charge batteries via CHR-1056.
1. Insert adapter into DC plug. The middle indicator will turn light green
immediately.
2. Put the first battery into one socket. Be sure the metallic parts meet each
other. Indicator near it will turn on right away. Check the previous table for
its meaning.
3. Repeat the same procedure to charge another battery.
In addition, the battery charger doesn’t have the function of discharging. So just
take off batteries when indicators become solid green light.
127. - 113 -
Appendix
B. Shoulder Strap (Optional)
Except hand strap, this tablet PC also provides shoulder strap in its accessories
kit. Install as below.
1. Use thumb to open clasp and fasten it with the metal ring on one side.
Repeat the same step to fasten another side.
2. Lift the tablet PC as illustration.
128. - 114 -
Appendix
C. SIM Card (Configure-to-Order)
The rugged PC supports 3G telecommunication network function, but it’s optional.
You should power off firstly, and then, refer to illustration below to remove battery
2. Inside the battery compartment is a SIM socket lying beside pin header. Insert
your 3G SIM card with its chip facing down into the socket until you hear a click.
To take off SIM card, push it inwards softly to have it ejecting from the socket.
129. - 115 -
Appendix
D. Wall-mount Cradle (Optional)
The (optional) wall-mount cradle, WMC-1056, is developed for G1056 computer
to extend the computer’s battery charging and networking features. The wall-
mount cradle features the following connectors:
• Two additional battery charging channels (for spare batteries)
• Two USB 2.0 (host) ports
• One RJ-45 Ethernet port
Front-right View Rear View
➎ ➏
➊
➍
➋
➌
➊
➊
➌
➏
➓➑ ➒
➐
➐
➐
➐
➓
Bottom View Note: (1) For the cradle’s status
LEDs to function,
connect the cradle to
external power.
(2) For the cradle’s rear I/O
connectors to function,
connect the cradle to
external power.
11
No. Description No. Description
1 Docking bolts for the computer 7 75mm VESA-mount holes
2 Contact pins for the computer 8 Power Jack
3 Spare battery charging status LED 9 RJ-45 Ethernet port
4
Cradle power status LED
(See D.1. Status LED.)
10 USB 2.0 host ports
5
Unit detection LED
(See D.1. Status LED.)
11
3W speaker
(See D.2. Speaker.)
6 Spare battery charging channels
130. - 116 -
Appendix
D.1. Status LED
The wall-mount cradle is provided with four status LEDs help users monitor the
status of the wall-mount cradle.
Printed
Graphic
Subject State Color Description
Cradle
power
status
On Green External power connected.
Spare
batteries
charging
status
Blinking Red The battery level remains 0%~15%.
Blinking Orange The battery level is 16%~49%.
Blinking Green The battery level reaches 50%~99%.
On Green The battery is fully charged.
Unit
detection
On Green
The computer is properly seated inside the
cradle.
Off N/A
The computer is not properly seated inside
the cradle.
Note: For the cradle’s status LEDs to function, connect the cradle to
external power.
D.2. Speaker
The wall-mount cradle has a speaker on its bottom, which makes the cradle
a speaker dock to facilitate the computer’s sound output without using any
additional cables.
The G1056 computer is able to switch its sound output from the built-in speaker
to the wall-mount cradle’s speaker as soon as it is seated into the cradle.
To know how to seat the computer into the wall-mount cradle, see D.3. Seat/
Dismount the Computer on page .
131. - 117 -
Appendix
D.3. Seat/Dismount the Computer
To use the wall-mount cradle to charge the batteries or to network with other
devices, seat the computer into the cradle first:
The pogo
contact pins
must meet.
The bolt should meet
the indentation in the
rear of the computer
+
132. - 118 -
Appendix
To dismount the computer from the cradle:
1. By the top side of the computer, swing the computer forth so the computer is
released from the docking bolt on the cradle.
Swing the
computer forth.
So the computer
is released from
the docking
bolt on the
cradle.
2. Dismount the computer from the cradle.
133. - 119 -
Appendix
D.4. Charge Batteries
To use the wall-mount cradle to charge the batteries which are installed on the
computer:
1. Install one or both batteries to the computer.
2. Connect the wall-mount cradle to power supply.
power outlet
power cable
power adapter
cradle
The cradle’s power status LED then lights green to signify that power is
connected.
Note: DO use the adapter that goes with the wall-mount cradle instead
of the adapter that goes with the G1056 computer.
3. Seat the computer into the wall-mount cradle as described in D.3. Seat/
Dismount the Computer on page 117.
Seat the
computer.
134. - 120 -
Appendix
The computer’s battery charging status LED then blinks red/orange/
green to signify the batteries are being charged. Normally it takes about 3
to 4 hours to charge the battery to full (depending on the power level of the
battery)
When the charging finishes, the said status LED turns green and stays on
to signify the battery is fully charged. See also Status LEDs on page 10 to
monitor the computer’s battery charging.
135. - 121 -
Appendix
D.5. Charge A Spare Battery
To charge a spare battery using the wall-mount cradle:
1. Connect the cradle to external power by the power adapter and power cable.
Power Jack
power
outlet
power
cable
power
adapter
cradle’s
rear
The cradle’s power status LED then lights green to signify that power is
connected.
Note: DO use the adapter that goes with the wall-mount cradle instead
of the adapter that goes with the G1056 computer.
2. Place a spare battery into the cradle’s battery channel. Note the contact pins
on the battery should meet the contact pins inside the charging channel.
The cradle’s battery charging status LED then blinks red, orange or
green to signify the battery is being charged. Normally it takes about 3 to 4
136. - 122 -
Appendix
hours to charge the battery to full.
When the charging finishes, the status LED will turn green and stay on to
signify the battery is fully charged. See also D.1. Status LED on page 116
to monitor the cradle’s battery charging.
And also note the folloiwng:
• It’s recommended not to recharge intermittently, which means not to plug and
unplug the power adapter frequently in a short period of time.
• See also Instructions for Rechargeable Battery Pack on page 14 to
know how to store and use the batteries.
137. - 123 -
Appendix
D.6. Network with Other Devices
Using the cradle to network with other devices saves you from the perpetual
plugging and unplugging of devices/cables.
To use the wall-mount cradle to network with other devices:
1. Seat the computer into the wall-mount cradle as described in D.3. Seat/
Dismount the Computer on page 117.
Seat the
computer.
2. Connect the USB device or LAN cable to the cradle’s rear ports.
USB device
LAN cable
Note:
For the cradle’s rear LAN ports and USB port to function, connect the
cradle to external power.
In order to use the cradle’s LAN port, install the cradle LAN driver first
as described in 2.4.17. Install Cradle LAN Driver (Optional) on page
50.
Depending on the feature of the peripheral device, sometimes it is
necessary to connect the device to external power.