Autodesk Sustainability: [Infographic] Progress Report FY2015
•
1 like•969 views
The Autodesk FY2015 Sustainability Report Infographic highlights some of the most important accomplishments from the fiscal year 2015 Sustainability Progress Report.
Report
Share
Report
Share
Download to read offline
Recommended
ClimateLaunchPad 2021 Japan Info Session
【Set your green business idea to success】
Climate Launchpad is an EU-supported initiative that helps people like you to scale their green ideas into successful businesses.
It's not just a competition but a business school in disguise.
Enter the world’s biggest green business competition!
We are looking for applicants and also sponsors.
For more info visit: https://www.facebook.com/CLPJapan
Solar @ hiight
HIIGHT is your personal energy expert deals in rooftop solar installation, solar EPC and solar equipment deals with the largest chain of distribution.
www.hiight.com
Google Green
Google uses renewable energy sources for 37% of its power needs as of 2015. It has invested nearly $2.5 billion in clean energy projects like wind and solar farms. These projects can generate over 2.9 gigawatts of electricity, which is enough to power many homes each year. The document also discusses how Google's data centers are efficient users of energy and how individual Google services require less energy than driving a car short distances.
Alexis Licha- Shell
The 1st OECD Roundtable on Cities and Regions for the SDGs was held at the OECD Headquarters in Paris on 7 March 2019, within the scope of the OECD programme on A Territorial Approach to the SDGs. The Roundtable brought together cities, regions, national governments, international organisations, private sector and other key stakeholders to identify trends and challenges in the localisation of the SDGs, including the experiences and key findings from the pilots of the programme.
Are we running out of energy efficiency?
While energy efficiency has led to significant energy savings in the past, there is still potential for further improvements. Global energy needs are expected to greatly increase by 2100 due to population growth, and lifestyle improvements in developing countries. However, technologies exist to improve efficiency in industries, buildings, appliances, and more. Continued investment in energy efficiency can help meet future energy demands more sustainably and cost-effectively than increasing energy production.
Green Movement
GreenDream is a student-led movement started by 8 IEEE Kerala student branches to address environmental issues caused by industrialization and technology through awareness campaigns, promoting green lifestyles, and supporting renewable energy projects. The movement aims to educate colleges, schools, public and corporations; undertake individual and team actions; and initiate technical projects involving solar energy, waste management, and renewable energy promotion. In its first 4 months, GreenDream involved 700 volunteers and received government recognition for its efforts to raise awareness and a voice in climate change discussions.
Community Sustainability Project Pamphlet
The document summarizes the 2016 Community Sustainability Project. It was led by the SIUE ASHRAE Design Team students and aimed to reduce the energy consumption related to HVAC&R at Beverly Farm, an assisted living community, through sustainable design. The students conducted load studies, learned HVAC design software, and designed a full HVAC system for the building with assistance from industry mentors. Donations for the project totaled $127,868.
Projects flyer
The AoC Projects team has become a leading provider in facilitating college projects over the past three years. They have delivered high profile projects focused on shared services, cloud computing, further education to higher education transitions, and curriculum development, with the goals of innovation and efficiency savings. In addition to benefiting member colleges, the team shares findings from its projects to disseminate best practices across the wider further education sector.
Recommended
ClimateLaunchPad 2021 Japan Info Session
【Set your green business idea to success】
Climate Launchpad is an EU-supported initiative that helps people like you to scale their green ideas into successful businesses.
It's not just a competition but a business school in disguise.
Enter the world’s biggest green business competition!
We are looking for applicants and also sponsors.
For more info visit: https://www.facebook.com/CLPJapan
Solar @ hiight
HIIGHT is your personal energy expert deals in rooftop solar installation, solar EPC and solar equipment deals with the largest chain of distribution.
www.hiight.com
Google Green
Google uses renewable energy sources for 37% of its power needs as of 2015. It has invested nearly $2.5 billion in clean energy projects like wind and solar farms. These projects can generate over 2.9 gigawatts of electricity, which is enough to power many homes each year. The document also discusses how Google's data centers are efficient users of energy and how individual Google services require less energy than driving a car short distances.
Alexis Licha- Shell
The 1st OECD Roundtable on Cities and Regions for the SDGs was held at the OECD Headquarters in Paris on 7 March 2019, within the scope of the OECD programme on A Territorial Approach to the SDGs. The Roundtable brought together cities, regions, national governments, international organisations, private sector and other key stakeholders to identify trends and challenges in the localisation of the SDGs, including the experiences and key findings from the pilots of the programme.
Are we running out of energy efficiency?
While energy efficiency has led to significant energy savings in the past, there is still potential for further improvements. Global energy needs are expected to greatly increase by 2100 due to population growth, and lifestyle improvements in developing countries. However, technologies exist to improve efficiency in industries, buildings, appliances, and more. Continued investment in energy efficiency can help meet future energy demands more sustainably and cost-effectively than increasing energy production.
Green Movement
GreenDream is a student-led movement started by 8 IEEE Kerala student branches to address environmental issues caused by industrialization and technology through awareness campaigns, promoting green lifestyles, and supporting renewable energy projects. The movement aims to educate colleges, schools, public and corporations; undertake individual and team actions; and initiate technical projects involving solar energy, waste management, and renewable energy promotion. In its first 4 months, GreenDream involved 700 volunteers and received government recognition for its efforts to raise awareness and a voice in climate change discussions.
Community Sustainability Project Pamphlet
The document summarizes the 2016 Community Sustainability Project. It was led by the SIUE ASHRAE Design Team students and aimed to reduce the energy consumption related to HVAC&R at Beverly Farm, an assisted living community, through sustainable design. The students conducted load studies, learned HVAC design software, and designed a full HVAC system for the building with assistance from industry mentors. Donations for the project totaled $127,868.
Projects flyer
The AoC Projects team has become a leading provider in facilitating college projects over the past three years. They have delivered high profile projects focused on shared services, cloud computing, further education to higher education transitions, and curriculum development, with the goals of innovation and efficiency savings. In addition to benefiting member colleges, the team shares findings from its projects to disseminate best practices across the wider further education sector.
Hult prize CUET champion team "In search of illumination"
This slides is the slide of the campus champion team of CUET for HULT prize regional final which is known as the Nobel prize of youth.The regional final was held in Cyberjaya,Malaysia where the team "In search of Illumination" participated in the international round.
Reinventing Green Building: An African Challenge
Jerry's presentation to 300 delegates at the African Green Building Summit on 24 March 2017, held at the United Nations regional headquarters in Nairobi, Kenya. Introduction to "Project Leapfrog," using technology as the means to prepare a new pathway toward green building in Africa.
Community Energy Forum-Anne Evens: Strategies for Community Energy Engagement
Community Energy Forum-Anne Evens: Strategies for Community Energy EngagementCenter for Energy and Environment
This document discusses strategies for greater community engagement around energy issues. It advocates starting with small, easy-to-implement solutions that are social and interactive in nature, such as energy-focused house parties. The document also recommends providing expertise to communities, making energy data more openly available, and creating integrated homeowner programs that include energy assessments, action plans, rebates and trusted contractors. The ultimate goals are to improve housing stock efficiency, make energy value more visible and transparent to consumers, and work towards a truly smart, community-resilient energy system that benefits all.Human Resources Critical Role in Sustainability
This document discusses the critical role of human resources in sustainability. It notes that HR owns key processes that can drive cultural change in a company and influence employee behaviors, such as performance management, policies on working conditions and compensation. The document advocates that sustainability should be a routine part of every employee's job, with HR helping to engage and enable employees across different departments to consider sustainability in their work. Finally, it raises the question of whether companies reward or punish behaviors like courage, initiative and selflessness.
2009-02-11 GRE104 - 1 - Table ronde Informatique durable - François Ajenstat
Microsoft is committed to environmental sustainability through reducing its operational impact, leveraging technology for positive change, and partnering with others. Key strategies include making infrastructure more sustainable by optimizing buildings and data centers, empowering employees to drive workplace changes, and researching new solutions like analyzing environmental data. Microsoft also partners with organizations to expand green IT practices and find more sustainable solutions.
Dragonfly solutions 2013
Dragonfly Solutions, Inc manufactures a demand-side solution to help control energy costs and demand charges for public and private sector clients. Dragonfly has integrated real-time energy monitoring, peak demand management and smart building controls over the internet. Harmonic resonance filtering, automatic Power Factor correction, voltage regulation and dual-level surge protection provide maximum efficiency and increase the effectiveness of solar PV systems
Circulor Economy – How to Shift "Value Creation" through "Sustainability"-Pet...
CSR Leadership World 2014 committee, Simba Events, concentrates to bring the whole system from global network to review and exam CSR issues with 360 angle to discover the earnest ways toward a sustainable economy future!
2014全球企业社会责任领袖峰会组委会-上海辛巴商务咨询有限公司，致力于打造一个整合全球CSR体系资源力量，用360度的全视角审视及检测当前及未来的CSR发展议题，共同找到通往可持续发展的商业未来的最佳路径！
State of the Energy Economy (NC 2013)
The luncheon speech given by Ivan Urlaub, Executive Director of the NC Sustainable Energy Association, at the Making Energy Work Conference in 2013.
About AIESEC IIT Kharagpur
Please Register at this link : http://Pay4users.com/?ref=39783
About AIESEC Local Chapter in IIT Kharagpur. Established in July 2008.
[Challenge:Future] IEDC's Green Bridge
The document discusses IEDC's Think Tank and its mission to promote innovation in green energy infrastructure and sustainable business opportunities. Specifically, it focuses on developing solar powered lighting solutions for Africa, where over 500 million people rely on the sun as their main lighting source. The Think Tank aims to create affordable energy access through new technologies, generating jobs and business opportunities while benefitting communities with safer, more environmentally friendly lighting options.
Crowd Sourcing Presentation10 30
The document discusses how crowdsourcing and virtual workforces can help companies overcome challenges with traditional project teams. It argues that relying on a global community of independent contractors working competitively reduces the risks of delays or failure compared to using in-house teams with single points of failure. Examples are given of companies that have partnered with TopCoder to crowdsource software development, data analysis and other tasks by running them as online competitions.
NASSCOM Design4India Design Summit & Awards 2019 - How Technology Enhances Cr...
NASSCOM Design4India Design Summit & Awards 2019 - How Technology Enhances Cr...NASSCOM Design4India
The document discusses the future of design and creativity. It notes that design has never been more important and explores how creativity can be made accessible to all. The document highlights Adobe XD and the Adobe Fund for Design as tools to make design more inclusive and collaborative. It examines trends in connected creativity, artificial intelligence, voice, augmented reality and ethical design that will shape the future of the industry.5 14 2013 briefing deck kh +db + th.5.13.ppt
This document outlines ACORE's strategic communications initiative. It includes an agenda for their May 14, 2013 meeting, which will provide an overview of ACORE, their communications initiative, accomplishments in 2012-2013, and goals for 2013-2014. The initiative aims to advance renewable energy as a solution for national security, economic security, and environmental security. Key strategies include the Energy Communicators Group, Energy Fact Check website, media outreach, and engaging stakeholders in government, industry, and the public.
(Ximb)sustainability petroleum industry
This document summarizes sustainable practices of global and Indian companies in the non-renewable energy industry. It discusses practices like putting a price on carbon, investing in renewables, and decommissioning by British Petroleum. For Indian companies, it outlines Vedanta's sustainability framework, environmental initiatives by Cairn India, investments in renewable energy by GAIL, emission reductions by NTPC, and objectives to reduce carbon footprint and manage waste by Indian Oil Corporation.
Integrating Climate into our Strategy
This document provides an overview of Total's strategy for integrating climate change considerations into its business plans and goals through 2035. It discusses Total's ambition to align with a 2 degree Celsius warming scenario, including increasing gas production and renewable energy to 20% of its portfolio. Total recognizes climate change as a major challenge and aims to help provide affordable energy while reducing emissions. The report outlines Total's strategic priorities of improving energy efficiency, optimizing its fossil fuel mix, and accelerating renewable energy development.
Why lean project delivery? ... The Lean to be GREEN business case
1) The document discusses how adopting lean project delivery practices can help address issues like climate change, waste, and cost overruns in the building industry.
2) It cites Toyota's use of lean to develop the highly profitable Prius hybrid car and argues a similar approach could help deliver high-performance green buildings on time and on budget.
3) The document proposes converting the $500 billion in annual waste in construction into making all new buildings net-zero by 2020, arguing that lean practices could make net-zero buildings economically viable.
Cities: The Energy Dimension
The document discusses sustainable cities and the role of energy. It notes that urban land expansion is increasing globally and in OECD countries. Sustainable cities should be the main target for construction and are achievable now through holistic approaches and projects like Hammarby Eco-cycle. Key challenges include governance and transparency while involving residents. Energy is an important part of sustainable cities but we are still in the early stages and need to learn from each other.
Greencomputing1 120424132051-phpapp01
Green computing aims to reduce the environmental impact of computers and associated systems through efficient and effective design, manufacturing, use and disposal with minimal harm to the environment. It began in the 1990s under programs like Energy Star that aimed to reduce e-waste and resource use. Approaches include virtualization, efficient displays and storage, and material recycling. Companies like VIA Technologies are developing carbon-free, solar-powered and energy efficient computing solutions. Adopting green computing brings advantages like reduced energy usage, conservation of resources, and environmental protection while helping save the planet for future generations.
Nvis technology-road2ideas
Nvis Technologies Pvt Ltd is a leading manufacturer of microwave components, test benches, and technical training equipment. The company aims to be a national leader in basic science and technology products and services that enhance education, the environment, and quality of life. Nvis is committed to customer satisfaction, environmental solutions, using latest technologies, and high ethical practices to drive growth.
Sustainability Department Presentation 2
Vestas aims to address sustainability challenges like climate change and resource scarcity through their approach of producing renewable energy products from wind turbines. They focus on reducing environmental impacts throughout the lifecycle of their turbines from manufacturing to operation. By the end of 2008, all of Vestas' production sites were ISO 14001 certified and their wind turbines are 80% recyclable with no water or CO2 emissions during operation, helping to reduce pressure on natural resources.
Autodesk Sustainability: Progress Report FY2015
Autodesk's seventh sustainability report describes the company's efforts and progress in sustainability during the FY2015 and it reiterates Autodesk's commitment to imagine, design,and create a better world. In 2014, we
expanded our Cleantech Partner Program into
China—a key market that is making bold
commitments to tackle climate change. We also
launched the Autodesk® Foundation—the first
foundation to invest in people who are using
design to tackle social and environmental
challenges. Read the report to learn more.
Autodesk Sustainability: Progress Report FY2014
On April 30, Autodesk launched its sixth sustainability progress report – “Sustainability in Action.” This year’s report reinforces our ongoing commitment to help people image, design, and create a better world. It also affirms our belief in the power of design to address the most pressing social and environmental challenges we face.
More Related Content
What's hot
Hult prize CUET champion team "In search of illumination"
This slides is the slide of the campus champion team of CUET for HULT prize regional final which is known as the Nobel prize of youth.The regional final was held in Cyberjaya,Malaysia where the team "In search of Illumination" participated in the international round.
Reinventing Green Building: An African Challenge
Jerry's presentation to 300 delegates at the African Green Building Summit on 24 March 2017, held at the United Nations regional headquarters in Nairobi, Kenya. Introduction to "Project Leapfrog," using technology as the means to prepare a new pathway toward green building in Africa.
Community Energy Forum-Anne Evens: Strategies for Community Energy Engagement
Community Energy Forum-Anne Evens: Strategies for Community Energy EngagementCenter for Energy and Environment
This document discusses strategies for greater community engagement around energy issues. It advocates starting with small, easy-to-implement solutions that are social and interactive in nature, such as energy-focused house parties. The document also recommends providing expertise to communities, making energy data more openly available, and creating integrated homeowner programs that include energy assessments, action plans, rebates and trusted contractors. The ultimate goals are to improve housing stock efficiency, make energy value more visible and transparent to consumers, and work towards a truly smart, community-resilient energy system that benefits all.Human Resources Critical Role in Sustainability
This document discusses the critical role of human resources in sustainability. It notes that HR owns key processes that can drive cultural change in a company and influence employee behaviors, such as performance management, policies on working conditions and compensation. The document advocates that sustainability should be a routine part of every employee's job, with HR helping to engage and enable employees across different departments to consider sustainability in their work. Finally, it raises the question of whether companies reward or punish behaviors like courage, initiative and selflessness.
2009-02-11 GRE104 - 1 - Table ronde Informatique durable - François Ajenstat
Microsoft is committed to environmental sustainability through reducing its operational impact, leveraging technology for positive change, and partnering with others. Key strategies include making infrastructure more sustainable by optimizing buildings and data centers, empowering employees to drive workplace changes, and researching new solutions like analyzing environmental data. Microsoft also partners with organizations to expand green IT practices and find more sustainable solutions.
Dragonfly solutions 2013
Dragonfly Solutions, Inc manufactures a demand-side solution to help control energy costs and demand charges for public and private sector clients. Dragonfly has integrated real-time energy monitoring, peak demand management and smart building controls over the internet. Harmonic resonance filtering, automatic Power Factor correction, voltage regulation and dual-level surge protection provide maximum efficiency and increase the effectiveness of solar PV systems
Circulor Economy – How to Shift "Value Creation" through "Sustainability"-Pet...
CSR Leadership World 2014 committee, Simba Events, concentrates to bring the whole system from global network to review and exam CSR issues with 360 angle to discover the earnest ways toward a sustainable economy future!
2014全球企业社会责任领袖峰会组委会-上海辛巴商务咨询有限公司，致力于打造一个整合全球CSR体系资源力量，用360度的全视角审视及检测当前及未来的CSR发展议题，共同找到通往可持续发展的商业未来的最佳路径！
State of the Energy Economy (NC 2013)
The luncheon speech given by Ivan Urlaub, Executive Director of the NC Sustainable Energy Association, at the Making Energy Work Conference in 2013.
About AIESEC IIT Kharagpur
Please Register at this link : http://Pay4users.com/?ref=39783
About AIESEC Local Chapter in IIT Kharagpur. Established in July 2008.
[Challenge:Future] IEDC's Green Bridge
The document discusses IEDC's Think Tank and its mission to promote innovation in green energy infrastructure and sustainable business opportunities. Specifically, it focuses on developing solar powered lighting solutions for Africa, where over 500 million people rely on the sun as their main lighting source. The Think Tank aims to create affordable energy access through new technologies, generating jobs and business opportunities while benefitting communities with safer, more environmentally friendly lighting options.
Crowd Sourcing Presentation10 30
The document discusses how crowdsourcing and virtual workforces can help companies overcome challenges with traditional project teams. It argues that relying on a global community of independent contractors working competitively reduces the risks of delays or failure compared to using in-house teams with single points of failure. Examples are given of companies that have partnered with TopCoder to crowdsource software development, data analysis and other tasks by running them as online competitions.
NASSCOM Design4India Design Summit & Awards 2019 - How Technology Enhances Cr...
NASSCOM Design4India Design Summit & Awards 2019 - How Technology Enhances Cr...NASSCOM Design4India
The document discusses the future of design and creativity. It notes that design has never been more important and explores how creativity can be made accessible to all. The document highlights Adobe XD and the Adobe Fund for Design as tools to make design more inclusive and collaborative. It examines trends in connected creativity, artificial intelligence, voice, augmented reality and ethical design that will shape the future of the industry.5 14 2013 briefing deck kh +db + th.5.13.ppt
This document outlines ACORE's strategic communications initiative. It includes an agenda for their May 14, 2013 meeting, which will provide an overview of ACORE, their communications initiative, accomplishments in 2012-2013, and goals for 2013-2014. The initiative aims to advance renewable energy as a solution for national security, economic security, and environmental security. Key strategies include the Energy Communicators Group, Energy Fact Check website, media outreach, and engaging stakeholders in government, industry, and the public.
(Ximb)sustainability petroleum industry
This document summarizes sustainable practices of global and Indian companies in the non-renewable energy industry. It discusses practices like putting a price on carbon, investing in renewables, and decommissioning by British Petroleum. For Indian companies, it outlines Vedanta's sustainability framework, environmental initiatives by Cairn India, investments in renewable energy by GAIL, emission reductions by NTPC, and objectives to reduce carbon footprint and manage waste by Indian Oil Corporation.
Integrating Climate into our Strategy
This document provides an overview of Total's strategy for integrating climate change considerations into its business plans and goals through 2035. It discusses Total's ambition to align with a 2 degree Celsius warming scenario, including increasing gas production and renewable energy to 20% of its portfolio. Total recognizes climate change as a major challenge and aims to help provide affordable energy while reducing emissions. The report outlines Total's strategic priorities of improving energy efficiency, optimizing its fossil fuel mix, and accelerating renewable energy development.
Why lean project delivery? ... The Lean to be GREEN business case
1) The document discusses how adopting lean project delivery practices can help address issues like climate change, waste, and cost overruns in the building industry.
2) It cites Toyota's use of lean to develop the highly profitable Prius hybrid car and argues a similar approach could help deliver high-performance green buildings on time and on budget.
3) The document proposes converting the $500 billion in annual waste in construction into making all new buildings net-zero by 2020, arguing that lean practices could make net-zero buildings economically viable.
Cities: The Energy Dimension
The document discusses sustainable cities and the role of energy. It notes that urban land expansion is increasing globally and in OECD countries. Sustainable cities should be the main target for construction and are achievable now through holistic approaches and projects like Hammarby Eco-cycle. Key challenges include governance and transparency while involving residents. Energy is an important part of sustainable cities but we are still in the early stages and need to learn from each other.
Greencomputing1 120424132051-phpapp01
Green computing aims to reduce the environmental impact of computers and associated systems through efficient and effective design, manufacturing, use and disposal with minimal harm to the environment. It began in the 1990s under programs like Energy Star that aimed to reduce e-waste and resource use. Approaches include virtualization, efficient displays and storage, and material recycling. Companies like VIA Technologies are developing carbon-free, solar-powered and energy efficient computing solutions. Adopting green computing brings advantages like reduced energy usage, conservation of resources, and environmental protection while helping save the planet for future generations.
Nvis technology-road2ideas
Nvis Technologies Pvt Ltd is a leading manufacturer of microwave components, test benches, and technical training equipment. The company aims to be a national leader in basic science and technology products and services that enhance education, the environment, and quality of life. Nvis is committed to customer satisfaction, environmental solutions, using latest technologies, and high ethical practices to drive growth.
Sustainability Department Presentation 2
Vestas aims to address sustainability challenges like climate change and resource scarcity through their approach of producing renewable energy products from wind turbines. They focus on reducing environmental impacts throughout the lifecycle of their turbines from manufacturing to operation. By the end of 2008, all of Vestas' production sites were ISO 14001 certified and their wind turbines are 80% recyclable with no water or CO2 emissions during operation, helping to reduce pressure on natural resources.
What's hot (20)
Hult prize CUET champion team "In search of illumination"
Hult prize CUET champion team "In search of illumination"
Community Energy Forum-Anne Evens: Strategies for Community Energy Engagement
Community Energy Forum-Anne Evens: Strategies for Community Energy Engagement
2009-02-11 GRE104 - 1 - Table ronde Informatique durable - François Ajenstat
2009-02-11 GRE104 - 1 - Table ronde Informatique durable - François Ajenstat
Circulor Economy – How to Shift "Value Creation" through "Sustainability"-Pet...
Circulor Economy – How to Shift "Value Creation" through "Sustainability"-Pet...
NASSCOM Design4India Design Summit & Awards 2019 - How Technology Enhances Cr...
NASSCOM Design4India Design Summit & Awards 2019 - How Technology Enhances Cr...
Why lean project delivery? ... The Lean to be GREEN business case
Why lean project delivery? ... The Lean to be GREEN business case
Similar to Autodesk Sustainability: [Infographic] Progress Report FY2015
Autodesk Sustainability: Progress Report FY2015
Autodesk's seventh sustainability report describes the company's efforts and progress in sustainability during the FY2015 and it reiterates Autodesk's commitment to imagine, design,and create a better world. In 2014, we
expanded our Cleantech Partner Program into
China—a key market that is making bold
commitments to tackle climate change. We also
launched the Autodesk® Foundation—the first
foundation to invest in people who are using
design to tackle social and environmental
challenges. Read the report to learn more.
Autodesk Sustainability: Progress Report FY2014
On April 30, Autodesk launched its sixth sustainability progress report – “Sustainability in Action.” This year’s report reinforces our ongoing commitment to help people image, design, and create a better world. It also affirms our belief in the power of design to address the most pressing social and environmental challenges we face.
Looking Forward to 2016!
EMC LLP together with Ekonnect has showcased a few key projects from the previous year, 2015. At the year end, we have shared this with our network along with our Ekocalendar also talking about what we look forward to working on in the new year.
Cisco Green Story June 2009
This presentation is an overview of Cisco’s point of view and approach to Environmental Sustainability.
This deck is intended to give customers and other stakeholders a high-level understanding of Cisco’s perspective on the Green priority — followed by a closer look at topics of more specific interest.
Additional more specific content may found on Cisco Book at wwin.cisco.com/go/cbook.
Microsoft Carbon Fee Impact
The document discusses Microsoft's internal carbon fee program, which aims to drive accountability for carbon emissions within the company and fund initiatives to reduce emissions and support low-carbon innovation. The carbon fee is charged to Microsoft business groups based on their emissions, and funds collected are invested in projects like renewable energy, emissions reductions, and carbon offsetting. The summary highlights that the fee has helped Microsoft reduce emissions by 7.5 million tons while investing over $10 billion in green power and impacting over 3.2 million people through offset projects. It also creates a virtuous cycle that motivates further environmental action and investment.
2017 Legacy of Good slides
This document provides an update on Dell Technologies' progress in building a legacy of good through their focus on supply chain responsibility, environmental sustainability, diverse and inclusive workplaces, and community investment. Some key accomplishments in fiscal year 2017 include conducting over 450 supply chain audits, reducing portfolio energy intensity by 54%, diverting 99% of manufacturing waste from landfills, providing technology access to over 2.3 million youth, and employees volunteering over 821,000 hours to their communities.
ADEC Innovations: Where Impact Matters
Mr. James. M. Donovan, CEO of ADEC Innovations, speaks to a group of AIM graduate students about how he grew a small operation providing back office services into a global organization.
EPAM CSR
EPAM Systems is a global IT services company founded in Belarus in 1993 with over 25,000 employees worldwide. The company discusses its corporate social responsibility in three main areas: education and learning, environment, and community. For education, EPAM provides over 500,000 hours of mentorship and technical training annually reaching over 35,000 students globally. In the environment, EPAM focuses on sustainable waste management, green building standards, and working towards carbon neutrality. For community, EPAM supports local events and initiatives in technology fields like Women in Tech and Children in Tech.
Demonstrating the Value of Employee Engagement: Case Studies
This document discusses case studies of employee engagement programs focused on sustainability from four companies: WeSpire, Intel, TD Bank, and CA Technologies. It describes how WeSpire's engagement platform has helped 25 companies across 45 countries complete over 2 million sustainability actions. It also provides examples of how Intel, TD Bank, and CA Technologies have measured increases in employee engagement through metrics like recycling rates, participation in challenges and pledges, and survey responses. The case studies demonstrate how tracking employee actions and measuring engagement can provide tangible environmental and financial benefits for companies.
Samsung_Electronics_Sustainability_Report
Samsung pursues sustainability throughout the product life cycle from design to manufacturing, use, takeback, and recycling. At the DX division, it develops eco-friendly materials and efficient solutions, collects e-waste globally, and enhances accessibility. At the DS division, it minimizes GHG emissions in semiconductor production and enhances energy efficiency to reduce data center/device usage, seeking innovations to transform end-of-life products into resources. It recycles discarded fishing nets into device parts and transforms old Galaxy phones into new uses through the Galaxy Upcycling program.
Company profile
Cyient provides engineering, manufacturing, geospatial, network, and operations management services to global industry leaders. They strive to provide comprehensive solutions to help clients achieve operational and business goals. Founded in 1991, Cyient delivers innovative solutions that add value through robust processes and state-of-the-art technology. Their quality products and services help clients gain competitive advantages. Cyient also focuses on social responsibility through initiatives in education, sanitation, digital literacy, and disaster relief.
Corporate Responsibility 2015
AMD designs and integrates technology that powers millions of devices. The document discusses AMD's corporate responsibility efforts, which include initiatives around energy efficiency, environmental stewardship, community engagement, and diversity. It highlights AMD's goal to deliver 25 times more energy efficiency by 2020 compared to 2014 levels. The summary also notes AMD exceeded its 2009-2014 environmental goals around water reduction, emissions reduction, and waste diversion.
Ellenzweig Climate Action Plan 2015
Ellenzweig architecture firm has committed to carbon neutrality through their Climate Action Plan with goals in staff engagement, design process/innovation, facility operations, and advocacy/outreach. Their plan outlines training staff on sustainability, integrating green technologies into design, operating a LEED Platinum office, and promoting sustainability in conferences. They successfully achieved a 60% carbon neutrality average for projects in 2013, exceeding their goal. Their ongoing challenge is to continue meeting neutrality goals in upcoming years through renewable energy and net-zero design.
Lunch and learn - Keys to a Successful 1.5 Degree Trajectory
How can companies set an ambitious climate strategy for the future? This deck takes a look at our current state of affairs, and positive options for moving forward.
New Value in Sustainability
The document discusses Accenture's sustainability goals and the role of its Geographic Services team in achieving them. It outlines Accenture's three environmental sustainability goals of achieving net-zero emissions, moving to zero waste, and planning for water risk. The Geographic Services team plays a vital role in powering sustainable innovation and providing the rigor needed to meet Accenture's science-based environmental targets through business infrastructure and support solutions that complement local needs. Examples are given of initiatives having impact, such as reducing emissions from travel and optimizing green IT practices.
Corporate social responsibility policy
Microsoft began in 1975 and has focused on corporate social responsibility through various initiatives. It aims to empower communities through education programs like Project Shiksha and YouthSpark. It also works to imagine future innovations with programs like DigiGirlz and realizes opportunities through partnerships. Microsoft is committed to environmental sustainability and has pledged to power datacenters with renewable energy and reduce waste. It impacts society through empowering youth, disaster relief, and partnerships to support communities.
Real World Design Challenge
The document summarizes the Real World Design Challenge, an aeronautical design competition for high school students. It describes the goals of expanding the competition to more states and developing new themes. It also outlines the benefits and support provided to participating teachers and student teams, including training, engineering mentors, software tools worth thousands of dollars, and the opportunity for students to contribute solutions to real industry problems. The document lists the winning teams from various states in 2009.
[Nordic GBC Conference 2013] Laura Varpasuo: Nokia green credentials: the val...
This document discusses Nokia's green credentials and the value of sustainable workplaces. It outlines Nokia's aims to minimize environmental impacts, ensure sound practices, and help people improve their lives with mobile technology. It also discusses how Nokia considers the environment in its facilities and across product lifecycles. Finally, it explains how eco-friendly workplaces can inspire employees and influence industry best practices through initiatives like certification, iconic green building designs, and using sensors to monitor plant growth on green roofs.
Excellence through collaboration – the delivery of sustainability in mega pr...
This document discusses Constructing Excellence (CE), a non-profit organization that promotes collaboration and excellence in construction projects. CE operates in the UK and has expanded to Qatar and the UAE. CE helped improve sustainability, costs, and outcomes on major UK projects like London 2012 and Crossrail. CE encourages early collaboration, common processes, long-term relationships, and measuring performance to deliver greater value and benefits through construction projects. The document provides examples of projects that achieved savings and other benefits through CE's principles of collaborative working.
Sustainability Knowledge Group launches new digital reporting tool
Sustainability Knowledge Group has launched a new digital reporting tool through a partnership with APlanet. The tool will allow SKG's clients to easily manage and track sustainability performance and ESG criteria. It provides dashboards to unify sustainability data in one place and create reports aligned with standards like GRI and SASB. The partnership will digitalize SKG's services and revolutionize how it collaborates with clients.
Similar to Autodesk Sustainability: [Infographic] Progress Report FY2015 (20)
Demonstrating the Value of Employee Engagement: Case Studies
Demonstrating the Value of Employee Engagement: Case Studies
Lunch and learn - Keys to a Successful 1.5 Degree Trajectory
Lunch and learn - Keys to a Successful 1.5 Degree Trajectory
[Nordic GBC Conference 2013] Laura Varpasuo: Nokia green credentials: the val...
[Nordic GBC Conference 2013] Laura Varpasuo: Nokia green credentials: the val...
Excellence through collaboration – the delivery of sustainability in mega pr...
Excellence through collaboration – the delivery of sustainability in mega pr...
Sustainability Knowledge Group launches new digital reporting tool
Sustainability Knowledge Group launches new digital reporting tool
More from Autodesk
Top 6 Reasons to work at Autodesk
#AutodeskLife is pretty great -- check out how we’re imagining, designing, and making a better world and why you should join us.
Forge - DevCon 2017, Darmstadt Germany - Introduction and Roadmap
This document discusses Autodesk's Forge platform and cloud-based solutions. It highlights how Forge allows connections between teams, provides visibility into projects, and generates insights from data. Various Forge APIs and applications are presented, including tools for construction management, reality capture, design automation, and product configuration. The benefits of digitalization and cloud-based collaboration are emphasized.
Forge - DevCon 2017, Darmstadt Germany: HFDM - What, why & how?
HFDM - What, why & how? With Kai Schroeder
Forge - DevCon 2017, Darmstadt Germany: Forge AR-VR-MR experiments
This document discusses Autodesk's Forge platform and its focus on immersive experiences using augmented reality (AR), virtual reality (VR), and mixed reality. It outlines Autodesk's current and planned offerings in this area, including VR experiences like Sketchbook, Revit Live, and VRED. Prototypes involving AR model overlays and flood simulations are also mentioned. The document discusses Autodesk's goal of preparing models for AR/VR through automated processes like decimation, LOD generation, UV unwrapping, and topology repair. An AR/VR API in development will streamline access to prepared models from Forge and other Autodesk products for use in third-party apps.
Forge - DevCon 2017, Darmstadt Germany: Integrating Forge Data Management API...
This document discusses integrating the Forge Data Management API with other storage providers. It covers using the API to access file storage on A360 Team, BIM 360 Docs and Fusion Team. The class objectives are to understand Forge file storage, learn how to download, upload and interact with files via the API, and review how to integrate with other providers like Box, Google Drive and Dropbox. It provides information on the Forge data structure and transferring files between Forge and other storage providers using AWS Lambda.
Forge - DevCon 2017, Darmstadt Germany: Moving to Forge and the Cloud with yo...
Moving to Forge and the Cloud with your existing .NET experience, with Augusto Goncalves
Forge - DevCon 2017, Darmstadt Germany: Control & program a real robot by man...
This document summarizes a class on controlling and programming real robots using 3D models in Forge. The class covers bringing robotic arm CAD models into Fusion 360 for version control and difference visualization. It also discusses using the Model Derivative API to view 3D models in Forge Viewer and customize them with controls. Finally, it discusses options for connecting physical robots to their 3D models for programming and control.
Forge - DevCon 2017, Darmstadt Germany: Innovate with Forge
This document discusses Autodesk's Forge platform and its capabilities for enabling connected, data-centric, and collaborative workflows. It introduces Forge.HFDM as a new cloud service that allows design collaborators to store and access data in a centralized location, enabling granular access control and collaborative workflows. Custom applications and integrations can also be built on top of Forge to add business logic and endpoints. The document provides examples of how Forge could be used for product configuration and branding tools to improve the customer experience.
Make your own Pokédex with the Pokéapi & Node/Express!
Code is cool. In this presentation, we share how to build your own Pokédex with the Pokéapi. Fun way to use javascript and learn about APIs. Forge.Autodesk.com
Developing 3D Visualization Apps
3D Visualization is closer than you think. In this presentation, Sharmila Phadnis and Shiya Luo show WWCode attendees how to quickly and easily start sharing your own 3D Visualizations with the Forge Platform. forge.autodesk.com
Harnessing the Power of Customer Feedback
Customer feedback is not a moment in time; it's a continuous process. In this presentation, Aradhana Vaidya, Cloud Rendering Engineer, talks about being guided by your product vision and the real problems for real people that are you trying to solve. Use your product knowledge, and customer feedback and market trends to decide where to go next.
Forge - DevCon 2016: Hsbcad from Acad to Revit to Cloud
Kris Riemslagh, co-founder of hsbCAD presented at Autodesk's first DevCon in 2016. We work with companies who are investing in automating their prefabrication of construction, picking up where the architect stops.
HSBCad delivers software solutions to the prefab industry to enable them to be free to construct any design, with any technology, and with any production system. Now and in the future, improving their competitive edge.
In construction the biggest money loss happens on site. Hsbcad offers software applications to make this prefabrication happen, both applications that work on the desktop and cloud solutions. This presentation will cover these solutions and more, including:
- More about HSBCad
- Complexity, detail and automation solution on Revit CFE
hsbTimber on Revit
- Jump into the cloud: hsbShare
-From cloud to AR with Hololens case study
Forge - DevCon 2016: Bringing BIM to Facility Management with Forge – Collabo...
Brian Haines, FM:Systems
FM:Systems detail how they are using the Forge Model Derivative API and Viewer to enable their customers to move to BIM for Facility Management. We will explore the challenges facing organizations who are managing large dynamic facility portfolios and how Autodesk solutions were a natural fit to help transition FM:Systems customers to true Lifecycle BIM for Facility Operations and away from traditional CAFM (Computer-Aided Facility Management) based solutions.
Forge - DevCon 2016: Drawings! Drawings! Everywhere!
The document discusses a presentation about the Design Automation API given by representatives from Autodesk, Risersoft, and BIMobject. It provides an overview of the API and demonstrations of how it can be used to process DWG files without needing to install or run AutoCAD locally. Risersoft demonstrates their UnitCAD tool which uses rules to automate CAD model creation. BIMobject discusses how they provide parametric BIM content and how the API could be used to generate DWG files from their BIMscripts.
Forge - DevCon 2016: Dancing with Elephants, Leveraging Market Leaders to Gro...
Jim Quanci, Autodesk
As a small company or startup, partnering with a large, established company can be like dancing with an elephant – one small misstep and you get squashed. But the upside is well worth it for the fleet-footed. A large company can bring to the dance all those things that are scarce for you as a startup - money, people, time, industry expertise and a huge customer base. Learn how you can use leaders in the market such as Google, Facebook, Apple, Microsoft, IBM and even Autodesk to stretch your marketing dollar, add virtual R&D staff to your team, finance your business growth – and accelerate your exit strategy.
Forge - DevCon 2016: Building Value-Added Integrations with Autodesk’s IoT APIs
Brian Sherman and Allan O’Leary, Autodesk
A technical overview of the Autodesk IoT APIs, including how to connect devices and how to view and export messages for use in other applications.
Forge - DevCon 2016: Collaborative VR using Google Cardboard & the View & Dat...
Kean Walmsley, Autodesk Research
One of the issues with VR today relates to the largely solitary experience it delivers: the user is by definition immersed and isolated from the people around them. But this doesn’t have to be the case. Web technology allows us to enable collaborative design reviews in VR, where one person guides others through a virtual experience.
Google Expeditions allows teachers to take their students on virtual field trips to the Great Wall of China or to the bottom of the ocean. We’ll be showcasing a comparable solution – using Forge – for the design industry, whereby architects and engineers can lead a group of participants – each using Google Cardboard – through a design review in a virtual space.
This session will demonstrate a prototype, collaborative VR solution created by a cross-divisional Autodesk team as part of the 2015 VR Hackathon in San Francisco.
Forge - DevCon 2016: Creating your next VR Walkthrough with Cloud Rendered St...
Michael Beale, Autodesk
If you are building a VR walkthrough like Google Street View, learn how you can use Forge to generate your stereo-panorama assets. A simple cube-map is all you need to display on your mobile device to experience depth and immersion. Using the API, you can learn how to extract alpha maps and depth maps to create parallax effects with camera translation, and blend in real 3D geometry into the scene.
Forge - DevCon 2016: Introduction to building for HoloLens
The document discusses the capabilities and features of the HoloLens augmented reality headset. It describes how HoloLens blends interactive holographic content with the physical environment using features like gaze input, gesture input, voice commands, spatial mapping, and spatial sound. It provides examples of how these features can be used to build immersive experiences and applications for storytelling, exploration, collaboration, and more. Resources for developing for HoloLens using tools like the HoloToolkit and Windows Holographic platform are also mentioned.
Forge - DevCon 2016: Introduction to Forge 3D Print API Through Sample Applic...
This document provides an overview and agenda for a presentation on Autodesk Forge 3D Print API. The presentation will cover an overview of the 3D Print API, how Dremel leverages Forge, print preparation steps, the printer simulator, sending a print job to a printer, and connecting to service bureaus. The document includes code samples for importing and repairing meshes, generating supports, creating trays, slicing models, and submitting print jobs using the Forge 3D Print API in Python. Resources mentioned include documentation, a print simulator sample on GitHub, and the Forge developer website.
More from Autodesk (20)
Forge - DevCon 2017, Darmstadt Germany - Introduction and Roadmap
Forge - DevCon 2017, Darmstadt Germany - Introduction and Roadmap
Forge - DevCon 2017, Darmstadt Germany: HFDM - What, why & how?
Forge - DevCon 2017, Darmstadt Germany: HFDM - What, why & how?
Forge - DevCon 2017, Darmstadt Germany: Forge AR-VR-MR experiments
Forge - DevCon 2017, Darmstadt Germany: Forge AR-VR-MR experiments
Forge - DevCon 2017, Darmstadt Germany: Integrating Forge Data Management API...
Forge - DevCon 2017, Darmstadt Germany: Integrating Forge Data Management API...
Forge - DevCon 2017, Darmstadt Germany: Moving to Forge and the Cloud with yo...
Forge - DevCon 2017, Darmstadt Germany: Moving to Forge and the Cloud with yo...
Forge - DevCon 2017, Darmstadt Germany: Control & program a real robot by man...
Forge - DevCon 2017, Darmstadt Germany: Control & program a real robot by man...
Forge - DevCon 2017, Darmstadt Germany: Innovate with Forge
Forge - DevCon 2017, Darmstadt Germany: Innovate with Forge
Make your own Pokédex with the Pokéapi & Node/Express!
Make your own Pokédex with the Pokéapi & Node/Express!
Forge - DevCon 2016: Hsbcad from Acad to Revit to Cloud
Forge - DevCon 2016: Hsbcad from Acad to Revit to Cloud
Forge - DevCon 2016: Bringing BIM to Facility Management with Forge – Collabo...
Forge - DevCon 2016: Bringing BIM to Facility Management with Forge – Collabo...
Forge - DevCon 2016: Drawings! Drawings! Everywhere!
Forge - DevCon 2016: Drawings! Drawings! Everywhere!
Forge - DevCon 2016: Dancing with Elephants, Leveraging Market Leaders to Gro...
Forge - DevCon 2016: Dancing with Elephants, Leveraging Market Leaders to Gro...
Forge - DevCon 2016: Building Value-Added Integrations with Autodesk’s IoT APIs
Forge - DevCon 2016: Building Value-Added Integrations with Autodesk’s IoT APIs
Forge - DevCon 2016: Collaborative VR using Google Cardboard & the View & Dat...
Forge - DevCon 2016: Collaborative VR using Google Cardboard & the View & Dat...
Forge - DevCon 2016: Creating your next VR Walkthrough with Cloud Rendered St...
Forge - DevCon 2016: Creating your next VR Walkthrough with Cloud Rendered St...
Forge - DevCon 2016: Introduction to building for HoloLens
Forge - DevCon 2016: Introduction to building for HoloLens
Forge - DevCon 2016: Introduction to Forge 3D Print API Through Sample Applic...
Forge - DevCon 2016: Introduction to Forge 3D Print API Through Sample Applic...
Recently uploaded
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
Top Interior Designers in Bangalore.pdf1
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
一比一原版(Columbia毕业证)哥伦比亚大学毕业证如何办理
Columbia毕业证offer【微信95270640】☀《哥伦比亚大学毕业证购买》Q微信95270640《Columbia毕业证文凭补》文凭、本科、硕士、研究生学历都可以做,留信认证的作用：
1：该专业认证可证明留学生真实留学身份。
2：同时对留学生所学专业等级给予评定。
3：国家专业人才认证中心颁发入库证书
4：这个入网证书并且可以归档到地方
5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在网内查询个人身份证信息后，同步读取人才网入库信息。
6：个人职称评审加20分。
7：个人信誉贷款加10分。
8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才《文凭Columbia毕业证书原版制作Columbia成绩单》仿制Columbia毕业证成绩单哥伦比亚大学学位证书pdf电子图》。
办国外哥伦比亚大学哥伦比亚大学毕业证录取书教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1哥伦比亚大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外哥伦比亚大学哥伦比亚大学毕业证录取书办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。我们的亲人生我养我的父母您们的年迈的苍老换来了我们新一代的新鲜与活力无论我们在哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗的
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Revolutionizing the Digital Landscape: Web Development Companies in India
Discover unparalleled creativity and technical prowess with India's leading web development companies. From custom solutions to e-commerce platforms, harness the expertise of skilled developers at competitive prices. Transform your digital presence, enhance the user experience, and propel your business to new heights with innovative solutions tailored to your needs, all from the heart of India's tech industry.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
一比一原版(UW毕业证)西雅图华盛顿大学毕业证如何办理
UW毕业证学历书【微信95270640】做UW文凭、办UW文凭、买UW文凭Q微信95270640买办国外文凭UW毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UW学历文凭、UW假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理西雅图华盛顿大学西雅图华盛顿大学毕业证假文凭流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！实伙伴平时山娃上学阿黑也摇头晃脑地跟去暑假用不着上学阿黑更是天天围着山娃转山娃上山除了察看埋下的野兽铁夹子看护早上逐上山的大黄牛外也觅着采草药摘红菇积攒起来拿到镇上卖山娃知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思片
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Mohannad Abdullah portfolio _ V2 _22-24
Mohannad Abdullah
Architecture | Interior Design
portoflio_V2_22-24
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
Recently uploaded (20)
Virtual Tour Application Powerpoint for museum of edinburgh
Virtual Tour Application Powerpoint for museum of edinburgh
Revolutionizing the Digital Landscape: Web Development Companies in India
Revolutionizing the Digital Landscape: Web Development Companies in India
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
PDF SubmissionDigital Marketing Institute in Noida
PDF SubmissionDigital Marketing Institute in Noida
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Autodesk Sustainability: [Infographic] Progress Report FY2015
- 1. $ FY2015 SUSTAINABILITY HIGHLIGHTS Launched in 2014, the Autodesk Foundation is the first of its kind to support people and organizations using design to create a better world Autodesk Foundation Fewer emissions than FY2009, on track with our C-FACT reduction target Relative CO2 improvement Amount of our global electricity consumption from renewable energy sources and we are committed to powering our business with 100 percent renewable energy Renewable energy LEED certifications altogether, now covering 32% of our total square footage LEED certifications Students, educators, and institutions we have provided with access to Autodesk software with no fee Supporting future designers Value of software donated through our Technology Impact Program to support nonprofit organizations using design to solve epic challenges Software for nonprofits 6.8M Number of employees who participated in a virtual race around the world that encouraged physical activity and team building Health and wellness 3K Amount our employees donated in volunteer time and money to nonprofits, which Autodesk boosted with $901,000 in matching funds Community involvement 17.5K hrs+ $929K Sustainable design education course hours completed since 2013 Sustainable design learning 1st Read the full Sustainability Progress Report FY2015 at www.autodesk.com/sustainabilityreport 200M+ 75K 27% 40% –100% 19 From Epic Challenges to Integrated Solutions