International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Design and Implementation of Real Time Remote Supervisory SystemIJERA Editor
In today’s fast growing communication environment and rapid exchange of data in networking field has triggered us to develop a home based remote supervisory monitoring system. In the present paper the physiological parameters of the patient such as body temperature, ECG, Pulse rate and Oxygen Saturation is displayed in MATLAB graphical user interface which is processed using ARM7 LPC2138. In case any emergency persist and parameters goes abnormal over the optimum level then a buzzer will ring to alert the caretaker. And the vital parameters will be displayed on the patient side computer and an automatic SMS will be sent to the doctor using GSM interface.
An Efficient Design and FPGA Implementation of JPEG Encoder using Verilog HDLijsrd.com
Image compression is the reduction or elimination of redundancy in data representation in order to achieve reduction in storage and communication cost. For this we use the simple computational method, 2D-DCT, using two 1D-DCT performed on matrix of (8X8). The DCT is a technique that converts a signal from spatial domain to frequency domain. Here we first convert the image into minimum code units. Then 2-D DCT is applied on each block. Then further process of Quantization, Zig-Zag approach and encoding is applied on the processed data. The architecture uses 3049 slices, 2,457 LUT, 46 I/Os of Xilinx Spartan-3 XC3S1600.
An Implementation of Embedded System in Patient Monitoring Systemijsrd.com
This paper deals with the measuring of multi-parameter to measure ECG, temperature, evoked potential, respiration rate which uses sensors to measure the patient condition continuously in ICU. For each parameter it uses separate sensors .this multi-channel parameter uses special type of sensors called infracted rays (IR) which are not harmful to human body. All this signals are collected from the patient's body then it is send to the computer and it is diagnosed by the doctor .It reduces the work for the doctors and it gives accurate values. If any abnormalities in the patient's body it produces alarm and it alerts the doctors. This paper also deals with online videography i.e the doctors can view the patient's condition anywhere from the hospital's. Results are stored in the secondary storage system in computer for future reference. the results are obtained in the form of graph, waveforms.
Design and implementation of portable electrocardiogram recorder with field ...IJECEIAES
The electrical activities of the heart are used to monitor cardiovascular diseases. It can be measured using electrocardiogram (ECG), a simple, painless test that can be recorded graphically. The physician, to predict the patient’s heart conditions and recommend suitable treatments, uses electrodes placed on the patient’s skin surface, to record these signals. The P, Q, R, S, T waves in the ECG signal can be used to determine the normality and abnormality of the heart's condition. The time interval differs for each cardiovascular condition of the heart. In this work, the ECG signal is acquired real-time using an intelligent sensor module, and the recorded value is processed to find the peak values. The data is sent to the web server using internet of things technology at a minimal time, where the physician can view it and proper decision can be taken. The real-time ECG data acquisition is also made using the field programmable gate array kit as it is a low cost, high-speed device and the output is viewed in the computer. The developed model is validated through MATLAB software and implemented for real-time applications.
HUMAN HEALTH MONITORING SYSTEM IN ABNORMAL CONDITION USING MSP 430 TO REMOTE...ijiert bestjournal
In hospital during the treatment of patient,doctor should have to monitor patient�s physiological information. Like,Physiological signal such as Heart beats,Blood s ugar (glucose),Body Temperature. Different chronic diseases like di abetes,congestive heart failure and also other diseases required to monitor physiological signa l of patient. Because we are not able to completely cure this chronicle diseases only to way to cure this diseases is to keep monitoring signals related to this di seases and control them. In this paper,proposed system in which different sensors are us ed to collect the physiological signals from patient and transfer this physiological measuremen t signals to pers onal computer of doctor or other paramedical staff. So this way patient can be analyzed by doctors from central observation canter. In this system we are taki ng three physiological si gnals from like Blood sugar (glucose),Body Temperature,Heart rate and transfer this physiological signals using communication module to the personal computer of observation center. Thus it reduce doctor work load and give more accurate result.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Design and Implementation of Real Time Remote Supervisory SystemIJERA Editor
In today’s fast growing communication environment and rapid exchange of data in networking field has triggered us to develop a home based remote supervisory monitoring system. In the present paper the physiological parameters of the patient such as body temperature, ECG, Pulse rate and Oxygen Saturation is displayed in MATLAB graphical user interface which is processed using ARM7 LPC2138. In case any emergency persist and parameters goes abnormal over the optimum level then a buzzer will ring to alert the caretaker. And the vital parameters will be displayed on the patient side computer and an automatic SMS will be sent to the doctor using GSM interface.
An Efficient Design and FPGA Implementation of JPEG Encoder using Verilog HDLijsrd.com
Image compression is the reduction or elimination of redundancy in data representation in order to achieve reduction in storage and communication cost. For this we use the simple computational method, 2D-DCT, using two 1D-DCT performed on matrix of (8X8). The DCT is a technique that converts a signal from spatial domain to frequency domain. Here we first convert the image into minimum code units. Then 2-D DCT is applied on each block. Then further process of Quantization, Zig-Zag approach and encoding is applied on the processed data. The architecture uses 3049 slices, 2,457 LUT, 46 I/Os of Xilinx Spartan-3 XC3S1600.
An Implementation of Embedded System in Patient Monitoring Systemijsrd.com
This paper deals with the measuring of multi-parameter to measure ECG, temperature, evoked potential, respiration rate which uses sensors to measure the patient condition continuously in ICU. For each parameter it uses separate sensors .this multi-channel parameter uses special type of sensors called infracted rays (IR) which are not harmful to human body. All this signals are collected from the patient's body then it is send to the computer and it is diagnosed by the doctor .It reduces the work for the doctors and it gives accurate values. If any abnormalities in the patient's body it produces alarm and it alerts the doctors. This paper also deals with online videography i.e the doctors can view the patient's condition anywhere from the hospital's. Results are stored in the secondary storage system in computer for future reference. the results are obtained in the form of graph, waveforms.
Design and implementation of portable electrocardiogram recorder with field ...IJECEIAES
The electrical activities of the heart are used to monitor cardiovascular diseases. It can be measured using electrocardiogram (ECG), a simple, painless test that can be recorded graphically. The physician, to predict the patient’s heart conditions and recommend suitable treatments, uses electrodes placed on the patient’s skin surface, to record these signals. The P, Q, R, S, T waves in the ECG signal can be used to determine the normality and abnormality of the heart's condition. The time interval differs for each cardiovascular condition of the heart. In this work, the ECG signal is acquired real-time using an intelligent sensor module, and the recorded value is processed to find the peak values. The data is sent to the web server using internet of things technology at a minimal time, where the physician can view it and proper decision can be taken. The real-time ECG data acquisition is also made using the field programmable gate array kit as it is a low cost, high-speed device and the output is viewed in the computer. The developed model is validated through MATLAB software and implemented for real-time applications.
HUMAN HEALTH MONITORING SYSTEM IN ABNORMAL CONDITION USING MSP 430 TO REMOTE...ijiert bestjournal
In hospital during the treatment of patient,doctor should have to monitor patient�s physiological information. Like,Physiological signal such as Heart beats,Blood s ugar (glucose),Body Temperature. Different chronic diseases like di abetes,congestive heart failure and also other diseases required to monitor physiological signa l of patient. Because we are not able to completely cure this chronicle diseases only to way to cure this diseases is to keep monitoring signals related to this di seases and control them. In this paper,proposed system in which different sensors are us ed to collect the physiological signals from patient and transfer this physiological measuremen t signals to pers onal computer of doctor or other paramedical staff. So this way patient can be analyzed by doctors from central observation canter. In this system we are taki ng three physiological si gnals from like Blood sugar (glucose),Body Temperature,Heart rate and transfer this physiological signals using communication module to the personal computer of observation center. Thus it reduce doctor work load and give more accurate result.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.