1) The document compares the load current sine wave of a conventional generator coil to a ReGenX generator coil. The conventional coil induces counter electromagnetic torque that reduces kinetic energy, while the delayed current in the ReGenX coil induces complementary torque that increases kinetic energy. 2) At top-dead-center, the ReGenX coil's delayed current produces north pole field energy that assists the north pole rotor magnet's departure, increasing kinetic energy. The conventional coil outputs more power due to flux harvesting from the ReGenX coil. 3) With the combined positive net torque and increased kinetic energy from the ReGenX coil, along with reduced power consumption, the system can operate at infinite efficiency.

1. 5Analysis of ReGenX Generator Coil Load Current Delay

2. Demonstration Video: ReGenX Generator Operating at Infinite Efficiency: https://youtu.be/pyO8FUTDX68
1) The conventional generator coil's Load Current Sine Wave is shown in green and the ReGenX Generator Coil is shown in purple.
2) The conventional generator coil sine wave establishes the generator rotor magnet's Physical Position with respect to the coil's core.
The conventional generator coil is employed to deliver electric power to the load and the ReGenX Generator Coil is employed to allow the
system to operate at infinite efficiency.
3) The ReGenX Generator Coil and conventional generator coil are wound on the same core, they are influenced by the same changing
rotor magnetic field in the same time domain and they are connected to the same purely resistive loads (PF =1).
Voltage and Current are in phase with each other in both cases.
4) From position 1-2 we have a North Pole rotor magnet which is approaching the coils' core and the conventional coil is inducing a North
Pole electromagnetic field into the air gap between the coils' core while the conventional coil delivers power to the load.
The conventional generator coil's induced (created) Magnetic Field Energy produces a Counter Electromagnetic Torque on the rotor
magnet which performs work resisting the rotor magnet's approach and lowering the kinetic energy of the system.
According to the Work Energy Principle – the conventional generator coil's induced electromagnetic field is a form of energy which is
created because it performs work on the rotor magnet when it reduces its kinetic energy.
Energy is the currency which is required to perform work in any direction.
The prime mover responds by consuming additional electric power and additional mechanical power is delivered to the generator's drive
shaft by the prime mover shaft until equilibrium is reestablished.
5) From position 2-3 (after TDC) we have a North Pole rotor magnet which is moving away the coils' core, the induced current in the coil
has changed direction and the conventional coil is now inducing South Pole electromagnetic field energy into the air gap between the
coil's core and the rotor magnet which produces a Counter Electromagnetic Torque on the rotor magnet which performs work resisting the
rotor magnet's departure away from the coil's core and reducing the kinetic energy of the system.
According to the Work Energy Principle – the conventional generator coil's induced electromagnetic field is a form of energy which is
created because it performs work on the rotor magnet when it reduces its kinetic energy.

3. The prime mover responds by consuming additional electric power and additional mechanical energy is delivered to the generator's drive
shaft until equilibrium is reestablished.
6) From position 7-5 we have a North Pole rotor magnet which is moving away from the coils' core from TDC BUT the ReGenX Generator
Coil's delayed Load Current is STILL inducing North Pole electromagnetic field energy which produces a Complementary Electromagnetic
Torque on the North Pole rotor magnet as it is moving away from the coils' core at TDC and it performs work assisting the rotor magnet's
departure away from the coils' core (at TDC), increasing the kinetic energy of the system.
According to the Work Energy Principle – the ReGenX Generator Coil's induced electromagnetic field is a form of energy which is created
because it performs work on the rotor magnet when it increases its kinetic energy.
The electrical output power of the conventional generator coil delivered to the load coil is increased due to Flux Harvesting, i.e. capturing
of the created Electromagnetic Field Energy from the ReGenX Generator Coil which is delivered to the conventional generator coil's core
in addition with the rotor's changing magnetic field.
Because the ReGenX Generator Coil's delayed induced electromagnetic field energy is performing work accelerating the system, the
prime mover responds by consuming reduced electric power and a reduction of mechanical energy is delivered to the generator's drive
shaft until equilibrium is reestablished.
7) Also from position 7-5 we have a South Pole rotor magnet which is now approaching the coils' core while the ReGenX Generator Coil's
Load Current Delay is producing a North Pole electromagnetically induced magnetic field energy which produces a Complementary
Electromagnetic Torque on the approaching South Pole rotor magnet and the ReGenX Generator Coil's delayed induced magnetic field
performs work assisting the South Pole rotor magnet's approach to the coils' core.
According to the Work Energy Principle – the ReGenX Generator Coil's induced electromagnetic field is a form of energy which is created
because it performs work on the rotor magnet when it increases its kinetic energy.
Because the ReGenX Generator Coil's delayed induced electromagnetic field energy is performing work accelerating the system, the
prime mover responds by consuming reduced electric power and a reduction of mechanical energy is delivered to the generator's drive
shaft until equilibrium is reestablished.
8) Because the conventional generator coil's Counter Electromagnetically induced Torque magnitude is LESS than the ReGenX
Generator Coil's Complementary Electromagnetically induced Torque, the NET TORQUE delivered by the two generator coils on the drive
shaft is POSITIVE which contributes to acceleration of the system.
The increase in the system's Kinetic Energy, with an increase in electrical output power delivered by the conventional and ReGenX
generator coils coupled with a reduction in the power consumption of the prime mover and a reduction in the drive shaft torque and a
reduction in the drive shaft power delivered to the generator coils to a level which is below the no load, Rotational Equilibrium level of 0.00
Nm and 0.00 Watts respectively ensures that the system is operating at infinite efficiency.