This document provides an overview and analysis of various image smoothing techniques. It begins with an introduction to image smoothing and its importance in digital image processing. Then, it analyzes several common image smoothing algorithms in detail, including Gaussian smoothing, edge-preserved filtering, bilateral filtering, optimization-based image filtering, non-linear diffusion filtering, robust smoothing filtering, gradient weighting filtering, and guided image filtering. For each algorithm, it explains the underlying concepts and mathematical principles. It finds that appropriate choice of smoothing techniques depends on factors like the imaging modality, noise characteristics, and task requirements. The document aims to provide insights into widely used image smoothing approaches.
An Efficient Approach of Segmentation and Blind Deconvolution in Image Restor...iosrjce
This paper introduces the concept of Blind Deconvolution for restoration of a digital image and
small segments of a single image that has been degraded due to some noise. Concept of Image Restoration is
used in various areas like in Robotics to take decision, Biomedical research for analysis of tissues, cells and
cellular constituents etc. Segmentation is used to divide an image into multiple meaningful regions. Concept of
segmentation is helpful for restoration of only selected portion of the image hence reduces the complexity of the
system by focusing only on those parts of the image that need to be restored. There exist so many techniques for
the restoration of a degraded image like Wiener filter, Regularized filter, Lucy Richardson algorithm etc. All
these techniques use prior knowledge of blur kernel for restoration process. In Blind Deconvolution technique
Blur kernel initially remains unknown. This paper uses Gaussian low pass filter to convolve an image. Gaussian
low pass filter minimize the problem of ringing effect. Ringing effect occurs in image when transition between
one point to another is not clearly defined. After removing these ringing effects from the restored image,
resultant image will be clear in visibility. The aim of this paper is to provide better algorithm that can be helpful
in removing unwanted features from the image and the quality of the image can be measured in terms of
PSNR(Peak Signal-to-Noise Ratio) and MSE(Mean Square error). Proposed Technique also works well with
Motion Blur.
An Efficient Approach of Segmentation and Blind Deconvolution in Image Restor...iosrjce
This paper introduces the concept of Blind Deconvolution for restoration of a digital image and
small segments of a single image that has been degraded due to some noise. Concept of Image Restoration is
used in various areas like in Robotics to take decision, Biomedical research for analysis of tissues, cells and
cellular constituents etc. Segmentation is used to divide an image into multiple meaningful regions. Concept of
segmentation is helpful for restoration of only selected portion of the image hence reduces the complexity of the
system by focusing only on those parts of the image that need to be restored. There exist so many techniques for
the restoration of a degraded image like Wiener filter, Regularized filter, Lucy Richardson algorithm etc. All
these techniques use prior knowledge of blur kernel for restoration process. In Blind Deconvolution technique
Blur kernel initially remains unknown. This paper uses Gaussian low pass filter to convolve an image. Gaussian
low pass filter minimize the problem of ringing effect. Ringing effect occurs in image when transition between
one point to another is not clearly defined. After removing these ringing effects from the restored image,
resultant image will be clear in visibility. The aim of this paper is to provide better algorithm that can be helpful
in removing unwanted features from the image and the quality of the image can be measured in terms of
PSNR(Peak Signal-to-Noise Ratio) and MSE(Mean Square error). Proposed Technique also works well with
Motion Blur.
Pattern Approximation Based Generalized Image Noise Reduction Using Adaptive ...IJECEIAES
The problem of noise interference with the image always occurs irrespective of whatever precaution is taken. Challenging issues with noise reduction are diversity of characteristics involved with source of noise and in result; it is difficult to develop a universal solution. This paper has proposed neural network based generalize solution of noise reduction by mapping the problem as pattern approximation. Considering the statistical relationship among local region pixels in the noise free image as normal patterns, feedforward neural network is applied to acquire the knowledge available within such patterns. Adaptiveness is applied in the slope of transfer function to improve the learning process. Acquired normal patterns knowledge is utilized to reduce the level of different type of noise available within an image by recorrection of noisy patterns through pattern approximation. The proposed restoration method does not need any estimation of noise model characteristics available in the image not only that it can reduce the mixer of different types of noise efficiently. The proposed method has high processing speed along with simplicity in design. Restoration of gray scale image as well as color image has done, which has suffered from different types of noise like, Gaussian noise, salt &peper, speckle noise and mixer of it.
Despeckling of Ultrasound Imaging using Median Regularized Coupled PdeIDES Editor
This paper presents an approach for reducing speckle
in ultrasound images using Coupled Partial Differential
Equation (CPDE) which has been obtained by uniting secondorder
and the fourth-order partial differential equations. Using
PDE to reduce the speckle is the noise-smoothing methods
which is getting attention widely, because PDE can keep the
edge well when it reduces the noise. We also introduced a
median regulator to guide energy source to boost the features
in the image and regularize the diffusion. The proposed
method is tested in both simulated and real medical
ultrasound images. The proposed method is compared with
SRAD, Perona Malik diffusion and Non linear coherent
diffusion methods, our method gives better result in terms of
CNR, SSIM and FOM.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
We develop an efficient MRI denoising algorithm based on sparse representation and curvelet transform with variance stabilizing transformation framework. By using sparse representation, a MR image is decomposed into a sparsest coefficients matrix with more no of zeros. Curvelet transform is directional in nature and it preserves the important edge and texture details of MR images. In order to get sparsity and texture preservation, we post process the denoising result of sparse based method through curvelet transform. To use our proposed sparse based curvelet transform denoising method to remove rician noise in MR images, we use forward and inverse variance-stabilizing transformations. Experimental results reveal the efficacy of our approach to rician noise removal while well preserving the image details. Our proposed method shows improved performance over the existing denoising methods in terms of PSNR and SSIM for T1, T2 weighted MR images.
Image enhancement is one of the challenging issues in image processing. The objective of Image enhancement is to process an image so that result is more suitable than original image for specific application. Digital image enhancement techniques provide a lot of choices for improving the visual quality of images. Appropriate choice of such techniques is very important. This paper will provide an overview and analysis of different techniques commonly used for image enhancement. Image enhancement plays a fundamental role in vision applications. Recently much work is completed in the field of images enhancement. Many techniques have previously been proposed up to now for enhancing the digital images. In this paper, a survey on various image enhancement techniques has been done.
Image Enhancement by Image Fusion for Crime InvestigationCSCJournals
In the criminal investigation field, images are the principal forms for investigation and for probing crime detection. The imaging science applied in criminal investigation is face detection, surveillance camera imaging, and crime scene analysis. Digital imaging succors image manipulation, alteration and enhancement techniques. The traditional methodologies enhance the given image by improving the local or global components of the image. It proves a debacle since it engages noise amplification, block discontinuities, colour mismatch, edge distortion and checkerboard effects thereby limiting image processing tasks. To the same degree of enhancement, spurned artefacts are given rise. Thus to balance the global and local factors of the image and to weed out the tenebrous components; fusion of multiple alike images are performed to produce a meliorated image. The fusion is done by fusing a pyramid constructed image and a wavelet transformed image. The pyramid image and the wavelet transformed image are then fused through to afford a revealing image for better perception by the human visual system. The experimental results show that our proposed fusion scheme is effective and the fusion is applied over a surveillance camera image grab.
IMAGE COMPRESSION AND DECOMPRESSION SYSTEMVishesh Banga
Image compression is the application of Data compression on digital images. In effect, the objective is to reduce redundancy of the image data in order to be able to store or transmit data in an efficient form.
Matlab Based Image Compression Using Various Algorithmijtsrd
Image Compression is extremely intriguing as it manages this present reality issues. It assumes critical part in the exchange of information, similar to a picture, from one client to other. This paper exhibits the utilization MATLAB programming to execute a code which will take a picture from the client and returns the compacted structure as a yield. WCOMPRESS capacity is utilized which incorporates wavelet change and entropy coding ideas. This paper displays the work done on different sorts of pictures including JPEG (Joint Photographic Expert Group), PNG and so on and broke down their yield. Different pressure procedures like EZW, WDR, ASWDR, and SPIHIT which are exceptionally regular in picture handling are utilized Beenish Khan | Ms. Poonam | Mr. Mohammad Talib"Matlab Based Image Compression Using Various Algorithm" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018, URL: http://www.ijtsrd.com/papers/ijtsrd14394.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/14394/matlab-based-image-compression-using-various-algorithm/beenish-khan
MULTIPLE CAUSAL WINDOW BASED REVERSIBLE DATA EMBEDDINGijistjournal
Reversible data embedding is a technique that embeds data into an image in a reversible manner. An important aspect of reversible data embedding is to find embedding area in the image and to embed the data into it. In the conventional reversible techniques, the visual quality is not taken into account which resulted in a poor quality of the embedded images. Hence the histogram modification based reversible data hiding technique using multiple causal windows is proposed which predicts the embedding level with the help of the pixel value, edge value, Just Noticeable Difference(JND) value. Using this data embedding level the data is embedded into the pixels. The pixel level adjustment considering the Human Visual System (HVS) characteristics is also made to reduce the distortion caused by data embedding. This significantly improves the data embedding capacity along with greater visual quality. The proposed method includes three phases: (i).Construction of casual window and calculation of edge and JND values in which the casual window determines the pixel values, the edge and the JND values are calculated (ii).Data embedding which is the process of embedding the data into the original image (iii). Data extractor and image recovery where the original image is recovered and the embedded bits are obtained. The experimental results and performance comparison with other reversible data hiding algorithms are presented to demonstrate the validity of the proposed algorithm. The experimental results show that the Performance of the proposed system on an average shows an accuracy of 95%.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Filter for Removal of Impulse Noise By Using Fuzzy LogicCSCJournals
Digital image processing is a subset of the electronic domain wherein the image is converted to an array of small integers, called pixels, representing a physical quantity such as scene radiance, stored in a digital memory, and processed by computer or other digital hardware. Fuzzy logic represents a good mathematical framework to deal with uncertainty of information. Fuzzy image processing [4] is the collection of all approaches that understand, represent and process the images, their segments and features as fuzzy sets. The representation and processing depend on the selected fuzzy technique and on the problem to be solved. This paper combines the features of Image Enhancement and fuzzy logic. This research problem deals with Fuzzy inference system (FIS) which help to take the decision about the pixels of the image under consideration. This paper focuses on the removal of the impulse noise with the preservation of edge sharpness and image details along with improving the contrast of the images which is considered as the one of the most difficult tasks in image processing.
COMPRESSION BASED FACE RECOGNITION USING DWT AND SVMsipij
The biometric is used to identify a person effectively and employ in almost all applications of day to day
activities. In this paper, we propose compression based face recognition using Discrete Wavelet Transform
(DWT) and Support Vector Machine (SVM). The novel concept of converting many images of single person
into one image using averaging technique is introduced to reduce execution time and memory. The DWT is
applied on averaged face image to obtain approximation (LL) and detailed bands. The LL band coefficients
are given as input to SVM to obtain Support vectors (SV’s). The LL coefficients of DWT and SV’s are fused
based on arithmetic addition to extract final features. The Euclidean Distance (ED) is used to compare test
image features with database image features to compute performance parameters. It is observed that, the
proposed algorithm is better in terms of performance compared to existing algorithms.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity
Pattern Approximation Based Generalized Image Noise Reduction Using Adaptive ...IJECEIAES
The problem of noise interference with the image always occurs irrespective of whatever precaution is taken. Challenging issues with noise reduction are diversity of characteristics involved with source of noise and in result; it is difficult to develop a universal solution. This paper has proposed neural network based generalize solution of noise reduction by mapping the problem as pattern approximation. Considering the statistical relationship among local region pixels in the noise free image as normal patterns, feedforward neural network is applied to acquire the knowledge available within such patterns. Adaptiveness is applied in the slope of transfer function to improve the learning process. Acquired normal patterns knowledge is utilized to reduce the level of different type of noise available within an image by recorrection of noisy patterns through pattern approximation. The proposed restoration method does not need any estimation of noise model characteristics available in the image not only that it can reduce the mixer of different types of noise efficiently. The proposed method has high processing speed along with simplicity in design. Restoration of gray scale image as well as color image has done, which has suffered from different types of noise like, Gaussian noise, salt &peper, speckle noise and mixer of it.
Despeckling of Ultrasound Imaging using Median Regularized Coupled PdeIDES Editor
This paper presents an approach for reducing speckle
in ultrasound images using Coupled Partial Differential
Equation (CPDE) which has been obtained by uniting secondorder
and the fourth-order partial differential equations. Using
PDE to reduce the speckle is the noise-smoothing methods
which is getting attention widely, because PDE can keep the
edge well when it reduces the noise. We also introduced a
median regulator to guide energy source to boost the features
in the image and regularize the diffusion. The proposed
method is tested in both simulated and real medical
ultrasound images. The proposed method is compared with
SRAD, Perona Malik diffusion and Non linear coherent
diffusion methods, our method gives better result in terms of
CNR, SSIM and FOM.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
We develop an efficient MRI denoising algorithm based on sparse representation and curvelet transform with variance stabilizing transformation framework. By using sparse representation, a MR image is decomposed into a sparsest coefficients matrix with more no of zeros. Curvelet transform is directional in nature and it preserves the important edge and texture details of MR images. In order to get sparsity and texture preservation, we post process the denoising result of sparse based method through curvelet transform. To use our proposed sparse based curvelet transform denoising method to remove rician noise in MR images, we use forward and inverse variance-stabilizing transformations. Experimental results reveal the efficacy of our approach to rician noise removal while well preserving the image details. Our proposed method shows improved performance over the existing denoising methods in terms of PSNR and SSIM for T1, T2 weighted MR images.
Image enhancement is one of the challenging issues in image processing. The objective of Image enhancement is to process an image so that result is more suitable than original image for specific application. Digital image enhancement techniques provide a lot of choices for improving the visual quality of images. Appropriate choice of such techniques is very important. This paper will provide an overview and analysis of different techniques commonly used for image enhancement. Image enhancement plays a fundamental role in vision applications. Recently much work is completed in the field of images enhancement. Many techniques have previously been proposed up to now for enhancing the digital images. In this paper, a survey on various image enhancement techniques has been done.
Image Enhancement by Image Fusion for Crime InvestigationCSCJournals
In the criminal investigation field, images are the principal forms for investigation and for probing crime detection. The imaging science applied in criminal investigation is face detection, surveillance camera imaging, and crime scene analysis. Digital imaging succors image manipulation, alteration and enhancement techniques. The traditional methodologies enhance the given image by improving the local or global components of the image. It proves a debacle since it engages noise amplification, block discontinuities, colour mismatch, edge distortion and checkerboard effects thereby limiting image processing tasks. To the same degree of enhancement, spurned artefacts are given rise. Thus to balance the global and local factors of the image and to weed out the tenebrous components; fusion of multiple alike images are performed to produce a meliorated image. The fusion is done by fusing a pyramid constructed image and a wavelet transformed image. The pyramid image and the wavelet transformed image are then fused through to afford a revealing image for better perception by the human visual system. The experimental results show that our proposed fusion scheme is effective and the fusion is applied over a surveillance camera image grab.
IMAGE COMPRESSION AND DECOMPRESSION SYSTEMVishesh Banga
Image compression is the application of Data compression on digital images. In effect, the objective is to reduce redundancy of the image data in order to be able to store or transmit data in an efficient form.
Matlab Based Image Compression Using Various Algorithmijtsrd
Image Compression is extremely intriguing as it manages this present reality issues. It assumes critical part in the exchange of information, similar to a picture, from one client to other. This paper exhibits the utilization MATLAB programming to execute a code which will take a picture from the client and returns the compacted structure as a yield. WCOMPRESS capacity is utilized which incorporates wavelet change and entropy coding ideas. This paper displays the work done on different sorts of pictures including JPEG (Joint Photographic Expert Group), PNG and so on and broke down their yield. Different pressure procedures like EZW, WDR, ASWDR, and SPIHIT which are exceptionally regular in picture handling are utilized Beenish Khan | Ms. Poonam | Mr. Mohammad Talib"Matlab Based Image Compression Using Various Algorithm" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018, URL: http://www.ijtsrd.com/papers/ijtsrd14394.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/14394/matlab-based-image-compression-using-various-algorithm/beenish-khan
MULTIPLE CAUSAL WINDOW BASED REVERSIBLE DATA EMBEDDINGijistjournal
Reversible data embedding is a technique that embeds data into an image in a reversible manner. An important aspect of reversible data embedding is to find embedding area in the image and to embed the data into it. In the conventional reversible techniques, the visual quality is not taken into account which resulted in a poor quality of the embedded images. Hence the histogram modification based reversible data hiding technique using multiple causal windows is proposed which predicts the embedding level with the help of the pixel value, edge value, Just Noticeable Difference(JND) value. Using this data embedding level the data is embedded into the pixels. The pixel level adjustment considering the Human Visual System (HVS) characteristics is also made to reduce the distortion caused by data embedding. This significantly improves the data embedding capacity along with greater visual quality. The proposed method includes three phases: (i).Construction of casual window and calculation of edge and JND values in which the casual window determines the pixel values, the edge and the JND values are calculated (ii).Data embedding which is the process of embedding the data into the original image (iii). Data extractor and image recovery where the original image is recovered and the embedded bits are obtained. The experimental results and performance comparison with other reversible data hiding algorithms are presented to demonstrate the validity of the proposed algorithm. The experimental results show that the Performance of the proposed system on an average shows an accuracy of 95%.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Filter for Removal of Impulse Noise By Using Fuzzy LogicCSCJournals
Digital image processing is a subset of the electronic domain wherein the image is converted to an array of small integers, called pixels, representing a physical quantity such as scene radiance, stored in a digital memory, and processed by computer or other digital hardware. Fuzzy logic represents a good mathematical framework to deal with uncertainty of information. Fuzzy image processing [4] is the collection of all approaches that understand, represent and process the images, their segments and features as fuzzy sets. The representation and processing depend on the selected fuzzy technique and on the problem to be solved. This paper combines the features of Image Enhancement and fuzzy logic. This research problem deals with Fuzzy inference system (FIS) which help to take the decision about the pixels of the image under consideration. This paper focuses on the removal of the impulse noise with the preservation of edge sharpness and image details along with improving the contrast of the images which is considered as the one of the most difficult tasks in image processing.
COMPRESSION BASED FACE RECOGNITION USING DWT AND SVMsipij
The biometric is used to identify a person effectively and employ in almost all applications of day to day
activities. In this paper, we propose compression based face recognition using Discrete Wavelet Transform
(DWT) and Support Vector Machine (SVM). The novel concept of converting many images of single person
into one image using averaging technique is introduced to reduce execution time and memory. The DWT is
applied on averaged face image to obtain approximation (LL) and detailed bands. The LL band coefficients
are given as input to SVM to obtain Support vectors (SV’s). The LL coefficients of DWT and SV’s are fused
based on arithmetic addition to extract final features. The Euclidean Distance (ED) is used to compare test
image features with database image features to compute performance parameters. It is observed that, the
proposed algorithm is better in terms of performance compared to existing algorithms.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity
Survey Paper on Image Denoising Using Spatial Statistic son PixelIJERA Editor
The classical non-local means image denoising approach, the value of a pixel is determined based on the weighted average of other pixels, where the weights are determined based on a fixed isotropic ally weighted similarity function between the local neighbourhoods. It is demonstrate that noticeably improved perceptual quality can be achieved through the use of adaptive anisotropic ally weighted similarity functions between local neighbourhoods. This is accomplished by adapting the similarity weighing function in an anisotropic manner based on the perceptual characteristics of the underlying image content derived efficiently based on the Mexican Hat wavelet. Experimental results show that the it can be used to provide improved perceptual quality in the denoised image both quantitatively and qualitatively when compared to existing methods.
Abstract Edge detection is a fundamental tool used in most image processing applications. We proposed a simple, fast and efficient technique to detect the edge for the identifying, locating sharp discontinuities in an image and boundary of an image. In this paper, we found that proposed method called LookUp Table performs well, which requires least computational time as compared to conventional Edge Detection techniques. And also in this paper we presented a comparative performance of various conventional Edge Detection Techniques. Keywords: Edge detectors, Lookup table.
ALGORITHM AND TECHNIQUE ON VARIOUS EDGE DETECTION: A SURVEYsipij
An edge may be defined as a set of connected pixels that forms a boundary between two disjoints regions.
Edge detection is basically, a method of segmenting an image into regions of discontinuity. Edge detection
plays an important role in digital image processing and practical aspects of our life. .In this paper we
studied various edge detection techniques as Prewitt, Robert, Sobel, Marr Hildrith and Canny operators.
On comparing them we can see that canny edge detector performs better than all other edge detectors on
various aspects such as it is adaptive in nature, performs better for noisy image, gives sharp edges , low
probability of detecting false edges etc
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
An effective and robust technique for the binarization of degraded document i...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Removal of Gaussian noise on the image edges using the Prewitt operator and t...IOSR Journals
Abstract: Image edge detection algorithm is applied on images to remove Gaussian noise that is present in the
image during capturing or transmission using a method which combines Prewitt operator and threshold
function technique to do edge detection on the image. This method is better than a method which combines
Prewitt operator and mean filtering. In this paper, firstly use mean filtering to remove initially Gaussian noise,
then use Prewitt operator to do edge detection on the image, and finally applied a threshold function technique
with Prewitt operator.
Keywords: Gaussian noise, Prewitt operator, edge detection, threshold function
The objective of this paper is to present the hybrid approach for edge detection. Under this technique, edge
detection is performed in two phase. In first phase, Canny Algorithm is applied for image smoothing and in
second phase neural network is to detecting actual edges. Neural network is a wonderful tool for edge
detection. As it is a non-linear network with built-in thresholding capability. Neural Network can be trained
with back propagation technique using few training patterns but the most important and difficult part is to
identify the correct and proper training set.
The objective of this work is to propose an image
denoising technique and compare it with image denoising
using ridgelets. The proposed method uses slantlet transform
instead of wavelets in ridgelet transform. Experimental result
shows that the proposed method is more effective than ridgelets
in noise removal. The proposed method is effective in
compressing images while preserving edges.
Removing fence and recovering image details various techniques with performan...RSIS International
In recent world, detection and removal of fences from
digital images become necessary when an important part of the
view changes to be occluded by unnecessary structures. When a
picture is taken, it may have certain structures or objects that
are unwanted. Many scenes such as parks, gardens, and zoos are
secured by fences and people can only take pictures through the
fences. Images or videos taken at open places using lowresolution
cameras, like smart phones are also frequently
corrupted by the presence of occlusions like fences. For the
background occluded by fences, the goal of image de-fencing is to
restore them and return fence-free images. Multi-focus images
are obtained and “defocusing” information is utilized to generate
a clear image. The main aim is when a colored image is input
having fence in the image and then deleting; removing the fence
gives the resultant image with the removal of fence from the
image. Also it involves filling the gaps of removed, damaged
region to recover lost image details. This paper includes various
methods for detection of fence(s), various methods for filling the
gaps, literature survey and performance analysis of methods for
background reconstruction.
Electrically small antennas: The art of miniaturizationEditor IJARCET
We are living in the technological era, were we preferred to have the portable devices rather than unmovable devices. We are isolating our self rom the wires and we are becoming the habitual of wireless world what makes the device portable? I guess physical dimensions (mechanical) of that particular device, but along with this the electrical dimension is of the device is also of great importance. Reducing the physical dimension of the antenna would result in the small antenna but not electrically small antenna. We have different definition for the electrically small antenna but the one which is most appropriate is, where k is the wave number and is equal to and a is the radius of the imaginary sphere circumscribing the maximum dimension of the antenna. As the present day electronic devices progress to diminish in size, technocrats have become increasingly concentrated on electrically small antenna (ESA) designs to reduce the size of the antenna in the overall electronics system. Researchers in many fields, including RF and Microwave, biomedical technology and national intelligence, can benefit from electrically small antennas as long as the performance of the designed ESA meets the system requirement.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!