The document outlines the candidate's work experience on various MEP projects in Saudi Arabia as a Project Engineer. It describes their responsibilities which included supervising installation and commissioning of HVAC, plumbing, electrical and other building systems. They ensured work was completed on schedule and per requirements. Projects included hospitals, hotels and commercial buildings. The candidate also prepared documentation, coordinated with clients and suppliers, and ensured safety compliance.

1. ANNEXURE
PROJECTS EXECUTED
At Dani Ellia Contracting Est., Riyadh, Kingdom of Saudi Arabia
Title: King Fahad Medical City
Role: MEP Project Engineer
Responsibilities:
• Handled all the post/pre-installation works required for the installation of GE and SEIMENS Made MRI Scan Machines.
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Ensure that all installations are as per hospital standards and MRI machine requirements.
• Liaised with client, GE, SEIMENS and consultant (RAD Planning - USA) for the work quality
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Coordinate with hospital to ensure the hospital standards in various streams.
• Handled installation of:
o Installation, testing and commissioning of Systems like medical gas, drainage and water supply system, Fire
fighting system, chilled water systems with necessary piping for MRI magnets, plumbing, AHU, DX type chiller, pre-
insulated duct system, exhaust and fresh air fans.
o Fire fighting sprinkler system, FM 200 system, Air sampling system.
o Complete electrification works like cabling, cable termination, lighting and power, earthing and lightning protection
o Low power systems like data, telephone, public address system(PAS),Master clock system, Intercom system
Fire alarm system, BMS system.
• Handled testing and commissioning of all MEP systems.
• Carried out safety assurance and audits in coordination with SEIMENS, GE and Hospital.
• Ensured effective preparation of:
o BOQ ,BOM, bills.
o supplier enquiry, Receive supplier quotations and negotiation.
o RFI, RFA and Project handover reports.
o Snag list and Correction.
Title: Prince Sultan Military Medical City
Role: MEP Project Engineer
Responsibilities:
• Liaised with client, GE, and consultant (RMAE Planning ) for the work quality.
• Handled all the post/pre-installation works required for the installation of GE MRI & CT Scan Machines.
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Carried out safety assurance and audits in coordination with GE and Hospital.
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Handled all the pre-installation works required for the installation of GE Made MRI Scan Machines, CT SCAN machines and
ultrasound machines to ensure that all installations are as per hospital standards and MRI machine requirements.
• Handled installation of:

2. o Installation, testing and commissioning of Systems like medical gas, drainage and water supply system, Fire
fighting system, chilled water systems with necessary piping for MRI magnets, plumbing, AHU, Roof top packaged
units, pre-insulated and sheet metal duct system, exhaust and fresh air fans, DX type Chiller.
o Fire-fighting sprinkler system, fm200 system, Air sampling system.
o Complete electrification like cabling, cable termination, lighting and power, earthing and lightning protection.
o Low power systems like data, telephone, public address system(PAS), centralized clock system, intercom system.
o Systems like BMS, Air sampling system, Fire alarm system.
• Ensured effective preparation of:
o BOQ, BOM, bills.
o supplier enquiry, Receive supplier quotations and negotiation.
o RFI, RFA and Project handover reports.
Title: Inter Continental Hotel in Riyadh:
Role: MEP Project Engineer
Responsibilities:
• Supervising day-to-day site operations.
• Preparation, execution & monitoring, testing and commissioning of all MEP systems like HVAC ,Plumbing (drainage ,
water supply, chiller piping, irrigation & Firefighting), FM 200 ,BMS, Complete Electrical & Low Current systems
as per compliance with the plan, shop drawing, specification, standards and schedule.
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Shop drawing and As built preparation in Auto cad ,its submittal and obtaining client/consultant approval.
• Sub contractor, vendor, Contractor bills and Manpower management.
• Detailed Quantity Calculations for BOQ/Tender, BOM, Invoicing, Estimation, Budgeting, Costing, Measurements of work,
Extra Items with Rate Analysis & Deviation Etc..
• Review and Check shop Drawings, Technical Bid Analysis, and Specifications, Prepare and Monitor Engineering
Documents.
• Assisting in the formulation, strict implementation, monitoring and reporting of safety Rules & standards in the project sites.
• Sub contractor, vendor, Contractor bills and Manpower management.
• Material Procurement, Sub Contracts management, Sub contracts agreement, Price negotiations.
• During installation resolve the conflicts between different systems and make as built drawing with
the approval of the consultant before the installation to avoid any discrepancies.
• Handling of material and drawing submission (RFA).
• Raising of inspection request (RFI) and coordinate with client/consultant for site inspection.
Title: Marriot Courtyard Hotel - Olaya, Riyadh, Saudi Arabia
Role: MEP Project Engineer
Responsibilities:
• Handled installation, testing and commissioning of all MEP systems like chiller, cooling tower,FCU, AHU, HVAC ducts,
various types of exhaust, smoke and fresh air fans with ducts, complete fire fighting systems and plumbing including
drainage and domestic water supply systems.
• Complete electrification like cabling, cable termination, lighting and power, earthing and lightning protection.
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Handled Installation, Testing and Commissioning of complete electrical systems like Lighting Systems, Panel Boards, Smoke
Detectors, Fire Alarm System, CCTV, Pas, Intercom System and BMS System.

3. • Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Ensured effective preparation of:
o BOQ, bills, and supplier enquiry and negotiation.
o RFI, RFA and Project handover reports
• Liaised with consultants and clients.
Title: MSD office at Wassel Tower - Riyadh, Saudi Arabia
Role: MEP Project Engineer
Responsibilities:
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Handled the installation, testing and commissioning of chilled water systemand necessary pipings, AHU, HVAC Ducts, FAD,
Exhaust Fans, fire fighting systems and other utilities.
• Complete electrification like cabling, cable termination, lighting and power, earthing and lightning protection.
• Liaised with consultants (Global Office Solutions-Riyadh).
• Handled complete electrification works, smoke detectors, fire alarms.
• Carried out supplier enquiry and negotiation.
Title: Saudi Aramco - Dammam, Saudi Arabia
Role: MEP Project Engineer
Responsibilities:
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Efficiently designed, installed, tested and commissioned exhaust system including ducts and fans for TMEIC inverters.
• Ensured effective preparation of BOQ, bills, quotations.
• Carried out supplier enquiry and negotiation, Safety assurance and audits.
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Managed preparation and submission of O&M manuals.
• Preparation of RFI, RFA and Project handover reports.
• Testing and commissioning of all MEP systems.
• Ensured effective preparation of:
o BOQ, bills, supplier enquiry, receive quotations and negotiation.
o RFI, RFA and Project handover reports.
Title: Saudi Investment Bank (SIB) Office – Riyadh, Saudi Arabia
Role: MEP Project Engineer
Responsibilities:
• Managed erection and commissioning of MEP works like HVAC system, firefighting system, exhaust and FAD’S, Plumbing
including Drainage and domestic water supply systems other utilities.
• Complete electrification like cabling, cable termination, lighting and power, earthing and lightning protection.
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Preparation of BOQ, bills.
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Supplier enquiry and negotiation. SAFETY assurance and audits.
• Preparation and submission of O&M manuals and preparation of RFI, RFA and Project handover reports

4. • Testing and commissioning of all MEP systems.
• Ensured effective preparation of:
o BOQ, bills, and supplier enquiry and negotiation.
o RFI, RFA and Project handover reports.
Title: AL-Batal Design Factory - Furniture Factory in Riyadh:
Role: MEP Project Engineer
Responsibilities:
• Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Supervising day-to-day site operations.
• Carried out project management of complete electrical, plumbing and HVAC works.
• Handled erection and commissioning of:
o Industrial coolers, chillers, chiller piping and package units with ducts, exhaust fans and cooling towers, handled
testing and balancing of all HVAC systems.
o Complete fire fighting systems.
o Complete drainage system and domestic water supply system.
o Complete electrification like cabling, cable termination, lighting and power, earthing and lightning protection.
• Managed complete electrification of factory including installation, testing and commissioning of lighting systems, panel
boards, busbar, data and telephone system, CCTV, public address system, fire alarms and smoke detectors, earthing and
lightning protection systems.
• Handled installation, testing and commissioning of compressors and diesel generator set.
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Ensured effective preparation of BOQ, bills, and supplier enquiry and negotiation RFI, RFA and Project handover reports.