1. SHAHBAZ QASIM
Flat# 501,5th Floor,Mouza Mohammad Fadhel Building,Istiqlal Street, Abu Dhabi,U.A.E
Mobile# +971-50-3194810,+92-300-2713565
E-mail = shahbazqasim@hotmail.com
CAREER OBJECTIVE:-
To pursuea challengingcareer as an Instrumentand Control Technician / Foreman / Supervisor and Trainer in Oil and Gas,
Petrochemical,Power Organization,where I can utilizemy knowledge and skillsfor the achievement of the company’s goal,in the
field of Instrument and Control. Also that I can continuously grow & learn and use my abilitiesto train the peoples as well.
CAREER SUMMARY:-
Total experience of 20 years. Duringthis tenure I was involvein pre-commissioning,commissioningof Oil & Gas plantand
Petrochemical plant,Preventive, corrective and routine plantmaintenance, well heads and degassingstations operation &
maintenance, annual turnarounds,On job trainings to the trainees. Attended various safety & technical trainings.Good command
on e-PTW System and CMMS software MAXIMO.
Havinggood knowledge on MultipleDCS, PLC, SCADA, RTU’s, Fireand Gas systems, Burner management systems, FlowComputer,
Gas Chromatograph, Moisture and other Analyzers, Wellhead Control Panel, HIPPS Panels, Production and Test Separators,Hot Oil
System, Solar Systems, FGC/CSO and Booster Compressors,MultiphaseFlowMeters, Boilers,Steam Turbines,Furnaces,Bently
Nevada Vibration MonitoringSystem.
Securities with Detailed TroubleshootingMaintenance and calibration of anti-surgeloops,Combustion Control Loops, Three
element Loops, Cascadeloops,SplitRange Loops, Feed Forward & Feed Back Loops and ESD partial strokecheck loops etc.
Handsome Safety awareness against Emergency handling, personal aswell as plantsafety,with ISO-9001-2000 for QMS, ISO-
14001-2004 for EMS and OHSAS 18001-1999 standards.
SUBJECT:-
Appliedforthe postof “Instrument and Control Technician / Foreman / Supervisor / Trainer”
TECHNICAL EDUCATION / QUALIFICATION:-
Diploma of Associate Engineer 1st Division 1995
Electronics Technology from Govt. College of Technology Bahawalpur.
Board of Technical Education Lahore.
ROLES AND RESPONSIBILITIES:-
 Manage and perform all kind of Instrument training programs for instrument staff and Instrument trainees.
 Manage and supervise the Instrument and Control activities at the site on a day-to-day basis and is responsible for the
Instrument activity as per plan and schedule. Establish and maintain timely completion of Instrument activities as per
project timelines. The work includes the preventive and breakdown maintenance of Instruments.
 Participate in all pre-commissioning and commissioning activities. Discuss route cause and maintenance activities with
senior & colleagues.
 Perform daily, weekly and monthly routine activities regarding the well head and plant associated Instruments. Include
carrying out routine checks of equipment such as choke valves, well head control panel, etc. weekly and monthly
according to schedules. Ensure that safety shutdown system is in good working order.
 Carry out and ensure routine maintenance and good housekeeping as well.
 Undertakes tasks,requiringa check on the basic parameters which areclearly established to see the successful completion
of work and attend to any problems that may need to be attended.
 Coordinates and schedules manpower and material to meet work requirements.
 Prepare daily progress reports & work order (Maximo 6.2) for review by the Instrument Engineer / Maintenance
Superintendent.
 Coordinates with logistics department on the procurement of required materials which ensure that the day to day
operations run smoothly.
 Carry out any other duties as and when required by the supervisor.
 Member of Damage Control Team (DCT) and Emergency Response Team (ERT) in MOL Pakistan Oil & Gas Co. BV.
 RPO (Radiation Protection Officer) in MOL Pakistan Oil & Gas Co. BV. and Registered in PNRA. (Pakistan Nuclear Regulatory
Authority)

2. PROFESSIONAL EXPERIENCE:-
ABU DHABI COMPANY FOR ONSHORE OIL OPERATIONS (ADCO) U.A.E
August 2013 to September 2016
Job Title: - Instrument and Control Foreman (Bu-Hasa Field)
 Perform Maintenanceof INVENSYS FOXBORO I/A Series DCS & INVENSYS TRICONIX PLC with Tri-Station Software.
 All preventive, corrective and routine maintenance carried out to reduce down time of Production trains,Test separators,
Central / Remote DegassingStations and Wellheads.
 Havinggood working experience on KAESER CSD-82 Instrument Air Compressors with SIGMA controls.
 Carried out CSS of Instruments and Fireand Gas System.
 Updated and reported activities/work orders in Maximo. Closed all Preventiveand corrective work orders in Maximo
System to avoid any backlog.
 Carry out periodic calibration and troubleshootingof test separator/Production Train related instruments to obtain the
availability of Production Trains and testseparators.
 Preparation of listfor Critical Spareparts & AssistEngineers in orderingmaterials.
 Prepare Listof Job Plan with sparerequirement.
 To check the availability of spareparts and prepare DTR whenever required.
 Performed Installation of new Fire & Gas Detectors and HAIMO Technologies MPFM Packageand also prepared
compatibility of old instruments with new ones.
 Refers to the HSE / Road Safety regulations and any critical activitiesregarding my areas as well as behavioral safety
 Always working with necessary PPE's & safePermit to work System/procedure.
 Attending HSE courses and being awareand comply with it and Attending monthly safety meetings.
 FollowingADCO safety standard and procedure ensuringNo violation of Life Protection Rules (LPR).
PETROLEUM DEVELOPMENT OF OMAN (PDO).
January 2013 to July 2013
Job Title: - On Job Trainer /Assessor (OJT) (Instrument) (Yibal Field)
 Manage and deliver the Complete instrument trainings to Instrument staff,Trainees Orientation Program (TOP) Batches
and Graduate Trainees and help them to grow their technical capabilities.
 Perform in House Trainingfor MaintenanceStaff and Maintain portfoliosof all techniciansand Partof the PCR team to
conduct interviews for technicians and trainees for development of their careers and promotions.
 FollowPetroleum Development of Oman (PDO) Life Protection Rules (LPR’s) and ensure no viol ation.
 Perform all kind of Instrument trainings in Technical Trainingcenter,instrument work shop and Plantarea as well.
 After each training,Did assessmentof the trainees about learningand help out them about their weaknesses.
MOL PAKISTAN OIL AND GAS CO. B.V.
December 2008 to January 2013
Job Title: - Senior Instrument Technician
 Installation Commissioningand Maintenanceexperience of DCS of YOKOGAWA CENTUM CS 3000, PLC of HIMA H51,
ALLEN BRADLEY, RTU and Solar Systems, Gas Chromatograph of Emerson Dynalyzer 570 & 590 with 2350A Gas
Chromatograph Controllers,Emerson FLOBOSS S600 Flow Manager and Moisture Analyzers AMETEK 3050 -OLV and
BARTON Chart Recorder.
 Erection, Commissioning,Loop Testing, Punch listing,Startup and Maintenance activities of Manzalai Central Processing
Facility of 350 MMSCFD of Gas and 10000 BPD of Condensate Oil.
 Erection, Commissioning,Loop Testing , Startup and Maintenance activities of Manzalai, Mamikhel and Maramzai
Wellheads 10 Nos. and Valve Assemblies 4 Nos.
 Commissioningand Maintenanceactivities of ROXAR MultiphaseFlowMeters.
 Installation,commissioning,maintenanceof E-PRODUCTION SOLUTION Wellhead Control Panel with pneumatic &
Hydraulic Control.
 Installation,commissioning,maintenanceand calibration of F&G system
 Expert in Wellhead and Well Assembly Operations.
 I have attended 3 annual Turnarounds in MOLPakistan Oil and Gas.
 Workingon CMMS software MAXIMO 6.2 for inventory maintaining, work order and job planning.
 Take daily reports of GCs, flow computers and multiphaseflowmeters.
 Perform monthly Joint Metering Calibration (JMC) with our clientand check calibrationsof all meteringinstruments.
 Perform daily Preventive, Corrective and routine maintenance activities on plant,wellheads and valveassemblies.
 Member of Firefightingteam in MOL Pakistan Oil and Gas.

3. FAUJI FERTILIZER BIN-QASIM KARACHI
September 1998 to December 2008
Job Title: - Instrument Supervisor
 Being a team leader Responsiblefor all type of repair and maintenance jobs atammonia, urea and DAP Plants during
running,shutdown and turnarounds as well.
 Handsome working experience of DCS Bailey Infi-90,and PLCs of Hima,AEG Modicon,Allen Bradley,Siemens,
Telemecanique, Vibration MonitoringSystems, SAACKE Hot Gas Generator, Heat Recovery Steam Generator (HRSG),
Speed Governors, Boilers,Steam turbine, Gas turbine, Furnace, Compressor Securities with Detailed Troubleshooting
Maintenance and calibration of Anti-surgeloops,Combustion Control Loops, Three element Loops, Cascadeloops,Split
Range Loops, Feed Forward & Feed Back Loops etc.
 I have attended almost10 Turnarounds duringmy tenure.
 Erection, Commissioning,Loop Testing, Startup and Maintenance activities of Ammonia, Urea & DAP Plant.
 Erection, Commissioning,Loop Testing, Startup and Maintenance activities of Natural Gas Desulphurization Project.
 Handled most of the BMR, Revamping & Modification Projects in Fauji Fertilizer Bin-QasimLtd.
 Installation,maintenance& calibration of Oxygen, Co2, Hydrogen, Ammonia, Conductivity,& pH Analyzers.
 Installation,commissioning,maintenanceand calibration of Bently Nevada 3300 and 3500 vibration Monitoringsystem.
 Calibration of control valves PSVs and PRVs with VENTIL Model VC25-SRV Test Bench.
 Diagnosingand SolvingHardwareproblems related to computer Systems.
FAUJI FERTILIZER COMPANY GOTH MACHHI
September 1996 to September 1998
Job Title: - Apprentice Technician Instrument
 Trainee of Instrument and Control.
 Workingon DCS Honey Well TDC 3000
 Perform repairingand maintenanceof different type of instruments at Ammonia / Urea / Utilities Plant.
 I was also participated in Annual Turn Around during 1996,1997 in which I was performed maintenance activities.
NOMAN ELECTRONICS CENTER
March 1995 to April 1996
Job Title: - Electronic Technician
 To Repair all kind of electronics Items and circuitboards up to component level.
 Expert in Computer hardware& software installation / maintenance / troubleshooting& configuration.
SUMMARY OF PROFESSIONAL SKILLS:-
MANAGEMENT SYSTEMS
 Expert in CMMS MAXIMO 6.2 System • e-PTW System • SAP System
DISTRIBUTED CONTROL SYSTEM (DCS)
 INVENSYS FOXBORO I/A Series (Working Experience)
 YOKOGAWA CENTUM CS 3000 (Erection, Commissioning,Startup & Maintenance).
 ABB BAILEY INFI – 90 (Erection, Commissioning,Startup & Maintenance).
 Honey Well TDC 3000. (WorkingExperience)
PROGRAMABLE LOGIC CONTROLLERS (PLC & RTU)
 INVENSYS TRICONIX with Tri-Station HMI Software and Wonder ware Graphics
 HIMA ( PLC H51H ) • AEG ( PLC MODICON 984-785E )
 ALLEN BRADLEY ( PLC-5/20 ) • ALLEN BRADLEY ( PLC-5/40 )
 SIEMENS (PLC SIMATEC S5-1155H) • SIEMENS (PLC SIMATEC S7-200 )
 TELEMECANIQUE MODICON • SIGMA CONTROLS (KASSER Air Compressor)
BURNER MANAGMENT SYSTEM (BMS)
 SIGMA THERMAL Hot Oil System.
 SAACKE Hot Gas Generator.
 Heat Recovery Steam Generator (HRSG).
 Auxiliary Boiler.
GAS CHROMOTOGRAPH C6+ & C9+ (GC)
Installation,commissioning,maintenanceand calibration of Gas Chromatograph of Emerson Dynalyzer 570 & 590 with 2350A
Gas Chromatograph Controllers.
FLOW COMPUTER (FC)
Installation,commissioning,maintenanceand calibration of Emerson FLOBOSS S600 FlowManager.
MOISTER ANALYZER
Installation,commissioning,maintenanceand calibration of MoistureAnalyzers AMETEK 3050-OLV.
CHART RECORDER
Installation,Calibration and maintenanceexperience of BARTON Chart Recorder.

4. FIRE & GAS SYSTEM
Installation,commissioning,maintenanceand calibration of F&G system
 Silver Tech Fireand Gas System
 Smoke Detection System VESDA
 H2S Toxic Gas Detectors Detcon, General Monitors,Simtronics,Honeywell
 Hydrocarbon Detectors (LEL) Det-Tronics, Sierra Monitors,Dragger
 UVIR Flame Detectors Det-Tronics, General Monitors,Dragger, Honeywell
 Open Path Gas Detectors Det-Tronics
 Smoke Detectors Apollo
 Heat Detectors Apollo
 MAC / Sounder / Beacons MEDC
WELLHEAD CONTROL SYSTEM
Installation,commissioning,maintenanceof followingWellhead control panels
 E-PRODUCTION SOLUTION WHCP Systems with pneumatic & Hydraulic Control.
 Proserve with Solar Panel • Suleman Petro with Solar Panel
 Brisco • Baker
 CAC • Frames
FLOW LINE PILOTS
Installation,commissioning,maintenanceof followingFlowlinePilots
 Sigma • Brisco
 Pneu Hydro • Bii Fold
HIPPS PANELS FOR WELLHEADS
 Self-Contained Cameron • Self-Contained Haliburton
 Self-Contained Baker Hughes • Barber Pump
VIBRATION MONITORING SYSTEM
Installation,commissioning,maintenanceand calibration of Bently Nevada 7200,3000 & 3300 Vibration monitoringsystems
includingvibration probes,Thrustprobes, Key phasors,Probe& Proximeter characteristics.
SPEED MONITORING SYSTEM
Commissioning,Installation,Maintenance& Calibration of TRISEN TS-310, WOODWARD peak-150, Pro Tech 203 Over speed
protection system & Speed pickups,activeand passive.
ANALYTICAL INSTRUMENTS
Installation,maintenance& calibration of Moisture,Oxygen, Co2, Hydrogen, Ammonia, Conductivity,& pH Analyzers.
GAS TURBINE
Erection, Commissioning, Startup and Maintenanceof Gas TurbineFrame Five 12 MW.
MULTIPHASE FLOW METERS (MPFM)
Installation,maintenance& calibration of ROXAR MultiphaseFlowMeters, Model 1900, 1900VI and 2600 ZECTOR.
Installation and Commissioningof HAIMO Technologies MultiphaseFlowMeter.
ELECTRONIC INSTRUMENTS
Commissioning,Installation & Calibration of the following
 Transmitter YOKOGAWA, SICK MEHAK, KROHNE, BAILEY, ROSEMOUNT, FOXBORO, E&H, HARTMAN & BRAUN.
 Temperature Transmitter YOKOGAWA, ROSEMOUNT, CORECI, HARTMAN & BRAUN.
 Thermocouples of K, J & T types. RTD’s of PT-100 & PT-1000
 Converters I/P & P/I SAMSON, FOXBORO, ROSEMOUNT, FISHER.
 Level Transmitter Capacitance,Displacer,Ultrasonic & Radar Types, ENRAF.
 Flow Scanners NuFlo Scanner-2000 Model with cone meters.
 Flow meters Multi phase, Senior Orifice,Magnetic, vortex, Turbine.
 Density transmitters OHMART VEGA.
 Switches Pressure,Flow, Level, Temperature, Vibration,Current, Tuning Fork, Proximity,Limit, Ultrasonic & Radar Type.
FOXBORO CONTROL SYSTEM
Spec 200 series,Repairing& Calibration of Foxboro Instruments, Control Cards,Hi gh Low Limiters, Electronic Indicators,Recorders,
Transmitters & I/P Converters.
PNEUMATIC INSTRUMENTS
Maintenance of Pneumatic Transmitters,Transducers,PressureRegulators,Controllers,Repeaters of FISHER, FOXBORO, MOORE,
BELLOFRAM.
VALVES, PSV, SOV
 Valves and Positioners of SAMSON, MASONELIAN svi-II,FISHER, FLOW SERVE, VALTEK, NORBORO, XOMOX etc.
 PSV’s of Different Makes.
 SOV’S of JOUCOMATIC, ASCO, MORREL & BARKSDALE.

5. COMPUTER SKILL:-
 Good command on e-PTW System and MAXIMO 6.2 version.
 Expert in electronic circuitboards repairingup to component level.
 Computer hardware& software installation / maintenance/ troubleshooting& configuration.
 Expert in DOS, MicrosoftWindows,MicrosoftOfficeetc.
 Sound knowledge on “ROXAR MultiphaseFlowMeter” Configuration and Communication Software(TOPSIDE).
SPECIALIZED TRAININGS:-
 Distributed Control System (DCS) Applications,Selection & Troubleshooting from Haward Technology MiddleEast.
 Compressor Control and Protections trainingfrom Caledonian Inc.USA.
 Compression Type Tube Fittings Coursefrom PDO Oman.
 Daniel Danalyzer Model 500 Gas Chromatograph Operations and Maintenance trainingfromEMERSON Singapore.
 HIMA H-51Q/H-51Q PLC trainingFrom INTECH Process Automation Inc.
 Special FirefightingTrainings in Fauji Fertilizer and MOL Pakistan Oil and Gas.
 Supervisory SkillsCoursefromThe Learning Organization.
 The art and Craft of Supervision Coursein Fauji Fertilizer Bin-QasimLtd. Karachi.
 Participatein MultipleTrainingCourses planned in-housein FFBL and MOL Pakistan Oil and Gas PDO and ADCO.
SAFTY AWARENESS AND RESPONSIBILITY:-
 Handsome Safety awareness againstpersonal aswell as plantsafety.We are currently followingIMS which deals with ISO -
9001-2000 for QMS, ISO-14001-2004 for EMS and OHSAS 18001-1999 standardsand tryingto serve best parallelswith
these standards.
 E-PTW (permit to work procedure). Having Firefighting training,Special trainingson various safety topics.Use of Personal
Protective Equipment’s (PPE’s), Acid and Chemical handling,Confined spaces,Emergency handling,Noisepollution and
FirstAid etc.
 Ensures sub-ordinates and contractors arefully awareand adhere to the company’s HSE programs,procedures, standards
and systems.
 Reports investigate accident/incidents and makes necessary recommendation for improvement.
 Carries outHSE tours, self-inspection and auditingto ensure safeworking conditions.
 Conducts TRA, Job risk assessments (JSA), toolbox meetings and prepare/review special procedures for non-routine
operations and maintenance activities.
PERSONAL INFORMATION:-
Father’s Name : QasimAli Malik
Profession : Instrument & Control Technician / Foreman / Supervisor / Trainer
Date of birth : 26 June 1976
I.D. Card No. : 31101-1633966-9
PassportNo. : BT4859662
Nationality : Pakistani
Religion : Islam
Marital Status : Married
Permanent Address : 8 - Disposal Road,Nizampura (East),Bahawal Nagar,Punjab,Pakistan
Home Phone No. : +971-2-4459351
MobileNo. : +971-50-3194810,+92-300-2713565
DrivingLicense. : Valid GCC DrivingLicense
EDUCATION:-
Matric 1st Division 1992
Govt. High School Bahawal Nagar
Board of Secondary Education Bahawalpur