This document provides a summary of Arundas's experience and qualifications as a mechanical engineer seeking assignments in MEP project engineering and management. Over 8 years of experience is highlighted, including experience managing MEP projects in hospitals, hotels, and other buildings. Responsibilities included project planning, execution, testing and commissioning of HVAC, plumbing, electrical and other MEP systems. Additional experience with standards compliance, document preparation, scheduling, procurement, and safety management is also summarized.

1. ARUNDAS.D
Mechanical Engineer
Contact Nos.: 00966549443641/ 00914792437883
E-Mail: arundasarunodayam@yahoo.com
Seeking assignments in MEP Project Engineering and Management with an organization of high
repute
preferably in Construction (EPC) industry
PROFILE SUMMARY
• A performance driven professional with 08 years and 7 months of Middle east & Indian hands own experience in:
~ MEP Projects Execution, Engineering & Management in Hospitals, Hotels, Factories, Warehouses, High rise and
residential building construction projects.
~ Project planning through MS project Gantt chart.
~ Preparation, execution & monitoring, testing and commissioning of all MEP systems like HVAC ,Plumbing.
(drainage ,water supply, chiller piping, pumps & Firefighting), FM 200 ,Air Sampling system, Medical Gas ,BMS,
Complete Electrical & Low Current systems as per compliance with the plan, shop drawing, specification, standards
and schedule.
~ Project Reporting , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
~ Hospitals and Hotels Engineering (MEP and civil) standards.
~ Medical Engineering standards for various medical projects like radiology,laboratories,operation theatres,morgue etc.
~ Post & Pre Installation works for Health care equipments like MRI SCAN,CT SCAN, X-RAY and ultrasound machineries
including installation including testing and commissioning of all required MEP systems and sub-systems.
~ Facility management, Operation and maintenance, Maintenance operation policies & procedures.
~ Shop drawing and As built preparation in Auto cad ,its submittal and obtaining client/consultant approval.
~ Sub contractor, vendor, Contractor bills and Manpower management.
~ Raising of purchase orders, purchase requisitions and material procurement.
~ Detailed Quantity Calculations for BOQ/Tender, BOM, Invoicing, Estimation, Budgeting, Costing, Measurements of work,
Extra Items with Rate Analysis & Deviation Etc..
~ Review and Check shop Drawings, Technical Bid Analysis, and Specifications, Prepare and Monitor Engineering
Documents
~ Assisting in the formulation, strict implementation, monitoring and reporting of safety Rules & standards in the project
sites.
~ Preparing technical proposals, material submittals and obtaining client/consultant approval.
~ Review of design, drawings and calculations & conduct quality survey.
~ Material Procurement, Sub Contracts management, Sub contracts agreement, Price negotiations.
~ Documentation (Project related ,Administration, ISO, EMS and OHSAS).
• Sound exposure in HVAC standards like ASHRAE, SMACNA. Plumbing codes like NFPA, IPC & Electrical code (NEC).
• Sound exposure in Medical gas, Plumbing pipes selection and its sizing, Plumbing fixtures & equipment selection like
pumps, valves etc.
• Sound exposure in Irrigation system, water treatment plants, STP, water features, Centralized water heater, drainage and
water supply and Swimming pool systems.
• Sound exposure in Dry and wet Fire fighting sprinkler system (deluge and pre action system), FM200, Automatic co2 and
foam extinguisher, Air sampling system, Fire extinguisher cylinders.
• Sound exposure in MEP (HVAC, ELECTRICAL, PLUMBING) design codes and designs.

2. • Sound exposure in Installation, testing and commissioning of various pipes like ERW and Seamless black and galvanized
steel, stainless steel, copper, PVC, c PVC, PVC, PPR, HDPE, LDPE, GRP pipes and relevant joints like rubber ring, solvent and
welded joints and fittings.
• Sound exposure in HVAC heat load calculation, HVAC equipment selection, Duct materials selection and Duct sizing.
• Adept in DX & chilled water systems, FCU's, AHU's, Air and water cooled Chillers, Cooling towers, Heat exchangers Package
roof top units, Exhaust Fans, VRF air conditioning system, Multi split air conditioners, Desert coolers and its electrical
systems and requirement.
• Sound exposure in Electrical power load calculation and all Electrical systems installations like installation of EMT, RSC and
pvc conduits, Bus Bar with tap offs cable trays and ladders, feeder cables, panel boards, MCC panels, electrical MDB'S,
Earthing & lightning arrestor systems, Lighting and power system Wiring with looping and home run.
• Sound exposure in low current systems like Matv, Cctv, BMS, Public address, Master Clock, Data and telephone network
Systems (network switches, patch panels, Fiber optic cables, MDF's, IDF's), Fire alarm system, Fire evacuation systems.
• Track record of targeting zero safety violation of team members, in terms of PPE and other works carried out at site.
• Deft in preparing daily work plans and ensuring that PTW and safety measures for better HSE are completed before the
start.
• Sound exposure in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).
• Proficient in swiftly completing up projects with competent cross-functional skills and ensuring on time deliverables within
pre-set cost parameters.
• Track record of developing operations & maintenance procedures to increase the efficiency and accordingly implementing
standards and ensuring adherence to quality standards through in-process checks.
• An effective communicator, proactive planner & negotiator with strong analytical, problem solving, strong communication
skills and organizational abilities.
• Instrumental in maintenance of the rotary and static equipments.
• Adept in fasteners, fittings, piping, pumps, valves, Hydraulic and pneumatic systems.
CORE COMPETENCIES
• Analyzing project requirements and reviewing all the project proposals wherein mapping requirements of manpower/
materials resources in which ensuring cost effective execution as per schedule.
• Capability to Handle Multiple Projects and Multi tasks.
• Investigation and Resolution of Field-initiated Questions Pertaining To Design and Engineering.
• During installation resolve the conflicts between different systems and make as built drawing with the approval of the
consultant before the installation to avoid any discrepancies.
• Liaising with Consultants/Clients for Materials and drawings Submissions(RFA) and approvals.
• Ensuring that inspection request (RFI) are raised for the consultant and the client inspection and coordinate for inspection.
• Perform all MEP site activities and coordinate with construction, structure, engineering and architecture departments during
installation of electrical and mechanical systems to ensure quality, compliance and execution of works according to the
Consultant and Work Owner expectations in most economical manner.
• Performing Pre/ Post installation audit at site with final Drawings.
• Developing project baselines while monitoring and controlling projects with respect to cost, resource deployment, time over-
runs and quality compliance to ensure its satisfactory execution.
• Anchoring erection & commissioning of equipments and ensured completion of project in minimum turnaround time with
effective resource utilization to maximize the output.
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Identifying areas of obstruction/ breakdown and taking steps to rectify the equipments through application of troubleshooting
tools.

3. • Well versed with Scheduled maintenance (TBM) and condition based maintenance (CBM) Tools and activities.
WORK EXPERIENCE
Since Sept’10 Dani Ellia Contracting Est., Riyadh, Kingdom of Saudi Arabia
Projects Engineer (MEP Division)
Key Result Areas:
• Planning and ensuring mechanical and electrical installation as per approved drawings and material approvals.
• Supervising day-to-day site operations.
• Preparation, execution & monitoring, testing and commissioning of all MEP systems as per compliance with
the plan, shop drawing, specification, standards and schedule.
• Ensuring timeliness in schedule and maintaining a punch list of to-do and accomplished work.
• Developing the Bill of Materials for the completion of works.
• Project Reporting, , Site Co-ordination, Client Meeting-Presentation and Team Supervision.
• Quantity Calculations for BOQ/Tender, Invoicing, Estimation, Budgeting, Costing, Measurements of work, Extra Items with
Rate Analysis & Deviation Etc.
• Receive quotations, classify, compare and negotiate.
• Monitor consumption of material with respect to the ordered materials.
• Maintaining a system of documentation for monitoring the productivity of teams.
• Ensuring that inspection request (RFI) are raised for the consultant and the client inspection
• Liaising with Consultants for Materials Submissions and approvals (RFA).
• Ensuring that approved method statements are available explaining the method statements to the foreman and charge
hand while maintaining proper documentation for records.
• Testing and commissioning of all MEP systems like HVAC, Plumbing, Electrical, Low current systems.
• Handling QHSE and EHS audits and documents.
• Efficiently worked in coordination:
o For obtaining ISO, EMS And OHSAS Certifications.
o With various departments of hospitals like engineering, infection control etc.
to ensure that project is in line with hospital standards.
o With vendors and sub-contractors.
o With major clients as SEIMENS HEALTH CARE LTD and GE HEALTH CARE LTD & is aware of their
systems , Standards, policies and procedures.
• Played a key role in:
o Preparation and submission of shop drawings, as built drawings and O&M manuals.
o Preparation of documents and coordinate for main vendor/subcontractor audits. Handling of QHSE and EHS audits
and documents.
Highlight:
• Successfully received 2 Awards as Best Project Engineer for completing the projects on time at King Fahad Medical City,
Prince Sultan Military Medical City and AL-Batal Design.
PREVIOUS WORK EXPERIENCE
1 Sep’08 to 17 Aug’10 with MRF Tyres Limited, Arkonam (Tamil Nadu)
Mechanical Engineer(Jr. MEP Executive) - MEP Engineering Department
Key Result Areas:
• Facility management, Operation and maintenance, carrying out Maintenance operation as per policies & procedures.

4. • Handled Erection, testing and commissioning of all machineries required for tyre manufacturing, HVAC and plumbing
systems, Conveyor systems, Pumps, Air compressors, D.G sets, Boilers, Hydraulic and pneumatic systems, heat exchangers,
cooling towers, chillers, Fire Hydrants, HVAC system, Electric hoists, Hydraulic lifting equipments, Diesel forklifts, Gearboxes
etc.
• Operation and maintenance of MEP Utilities.
• Handled shifts, Effective initialization and utilization of Manpower.
• Played a key role in:
o Arranging of spares.
o Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
o Managing, Coordination of TPM activities.
• Gained practical experience in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).
• Effective initialization and utilization of Manpower.
Highlight:
• Played a stellar role in implementing procedures like maintenance cost reduction, achieving zero breakdowns, maintenance
time reduction(MTTR) and reduction of time between failure (MTBF) wherein attained a reward for the same as a part of
continual improvement program.
1 May’06 to 30 Aug’08 with CII Gaurdian International Ltd., Cochin (SEZ)
Mechanical Engineer (Asst.MEP Engineer)
Key Result Areas:
• Installation ,testing and commissioning of MEP utilities like HVAC, Plumbing, Electrical etc.
• Facility management, Operation and maintenance, carrying out Maintenance operation as per policies & procedures.
• Played a key role in:
o Arranging of spares.
o Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
• Gained practical experience in OHSAS, ISO&TS environment, fire and safety and Environment management system (EMS).
• Coordinating and carrying out scheduled maintenance (TBM) and condition based maintenance (CBM) activities.
TRAININGS
• Successfully attended various trainings on:
o TPM, Occupational Health & Safety (OHSAS )in 2008 and 2009 and TQM in the year 2011.
o ISO,EMS,5S, Kaizen and Lean Manufacturing techniques in 2007.
KNOWLEDGE PURVIEW
• Professional Software like AutoCAD, MS Project, Carrier HAP heat load calculation, MS Office.
• Well versed with Electrical, Plumbing (drainage, water supply and fire fighting), HVAC and Civil Drawings.
• ASHRAE, SMACNA, SASO (Saudi Arabian standards), IPC, NFPA, NEC codes.
• HVAC Cooling Load Calculation (by manual calculation and HAP software), Duct designing using ductilator.
• Electrical Load calculation and selection of wires and cables, MCCB and Circuit breakers, Lighting and power systems.
• civil works like sub and super civil structure, dry and wet Gypsum ceilings and partitions, Flooring, False ceiling ,Interior
decorations, aluminum and structural steel fabrication.
• Communication and networking system, BAS (Building automation system), BMS (Building Management Systems).
ACADEMIC DETAILS

5. 2006 BE in Mechanical Engineering from Mailam Engineering College, Mailam, (Anna University, Chennai) with 78%.
Pursuing MBA (Part Time) in Operations and Management from ISBM, Cochin.
IT SKILLS
Platforms: DOS, Windows, Linux.
Tools: MS office, MS project AutoCAD, SAP, ERP, Oracle 11 I, Microsoft outlook and LAN Environment.
PERSONAL DETAILS
Date of Birth: 10
th
March, 1985
Contact Address: C/O K.Devadasan, Arunodayam (H), Kappil Mekku, Krishnapuram P.O., Kayamkulam, Alleppey Dist.
Kerala,PIN Code - 690533
Languages Known: English, Hindi, Malayalam, Tamil and Arabic
Passport Number : F 9495223
Driving License Holding : valid Indian and Saudi Arabian
I do hereby confirm that the information furnished is true to the best of my knowledge and belief.
ARUN DAS.D
REFER TO ANNEXURE FOR PROJECTS EXECUTED

6. 2006 BE in Mechanical Engineering from Mailam Engineering College, Mailam, (Anna University, Chennai) with 78%.
Pursuing MBA (Part Time) in Operations and Management from ISBM, Cochin.
IT SKILLS
Platforms: DOS, Windows, Linux.
Tools: MS office, MS project AutoCAD, SAP, ERP, Oracle 11 I, Microsoft outlook and LAN Environment.
PERSONAL DETAILS
Date of Birth: 10
th
March, 1985
Contact Address: C/O K.Devadasan, Arunodayam (H), Kappil Mekku, Krishnapuram P.O., Kayamkulam, Alleppey Dist.
Kerala,PIN Code - 690533
Languages Known: English, Hindi, Malayalam, Tamil and Arabic
Passport Number : F 9495223
Driving License Holding : valid Indian and Saudi Arabian
I do hereby confirm that the information furnished is true to the best of my knowledge and belief.
ARUN DAS.D
REFER TO ANNEXURE FOR PROJECTS EXECUTED