Electrical network monitoring
•
0 likes•441 views
The document discusses energy efficiency problems in power networks and potential solutions. It describes software that can model emergency situations, predict faults, and provide recommendations to improve efficiency. It also outlines a power network monitoring system that continuously monitors the status of power systems, does recommendations for compensation equipment, predicts faults using basic information, and allows for intelligent power distribution both inside and outside the system with cloud features. The monitoring system could help control power system status and save money on electricity.
Report
Share
Report
Share
Download to read offline
Recommended
Dr wattsun E-monitoring
The document introduces Dr WattSun, a new third-party solar PV system monitoring solution for distributed solar systems in India. Existing solutions have issues like high costs, lack of portfolio management capabilities, and expertise requirements. Dr WattSun aims to reduce costs, time, and complexity through a plug-and-play smart hardware device that collects and transmits real-time performance data via the cloud to a software platform for remote monitoring and control. Key features highlighted include single window portfolio management, low costs and scalability, and revenue-grade metering. The system is still in development stages and not ready for purchase yet.
Oracle AWR baseline - Basic
This document provides steps for configuring an AWR baseline using Oracle Enterprise Manager Cloud Control. It details how to:
1. Create a single AWR baseline by selecting a snapshot range and time period.
2. Compute baseline statistics and refresh until the status shows as completed.
3. Set the performance page to show the 99th percentile line using the new baseline.
4. Configure alert thresholds for the baseline by editing metric thresholds.
AVReporter (PEM Energy Analyzer) in practice
Broad range of report and dashboard applications such as KPI reports, Energy Ratings using ABC charting, Energy Use Allocation, Energy by Threshold Limits, Optimization of energy bookings, Energy Consumption Forecasting, Green House Gases reports, CO2 emission calculations, Examination of quality features, Statements of efficiency of the application of renewable energy sources, etc.
www.konsys-international.com
www.twitter.com/avreporter
Automatic performance-diagnosis-and-tuning-in-oracle
Automatic Performance Diagnosis and Tuning in Oracle provides a self-healing database system called Automatic Database Diagnosis Monitor (ADDM) that diagnoses performance issues, finds root causes, and provides recommendations. ADDM collects data using Active Session History on database time, analyzes it using advisors, and provides resolutions to improve performance in a self-managing loop. It was shown to effectively diagnose and resolve a real performance fall at Qualcomm by identifying a problematic SQL statement and recommending an index creation.
Valarie Hines: 2013 Sandia National Laboratoies Wind Plant Reliability Workshop
Valarie Hines: 2013 Sandia National Laboratoies Wind Plant Reliability WorkshopSandia National Laboratories: Energy & Climate: Renewables
Sandia National Laboratories works with wind plant operators and Strategic Power Systems to collect operating data through ORAPWind software in order to benchmark reliability performance and identify improvement opportunities. Preliminary results for the 2013 benchmark show electronics issues remain a key driver of downtime. The benchmark provides metrics on time accounting, power curves, and event frequency versus downtime which require summarized SCADA, event, and work order data organized by time period and wind turbine system. Final 2013 results will be published in October.Low cost weather station with remote control
ieee 2012 projects for m tech btech ece eee embedded systems@ srcembedded solutions- hyderabad.
web:www.srcembedded.com,
ph-8297 313 858
mail:srcembedded@gmail.com
Green Computing at RIT
This document discusses a trial conducted at RIT to reduce computer energy usage. The trial was conducted in the NRH Computer Lab over 11 weeks, with baseline testing for the first 4 weeks and then implementing a sleep policy of 20 minutes for the next 7 weeks. The results showed a reduction in power consumption of 66% compared to baseline. Extrapolating this to all of RIT's computer labs could save between $20,000 to $60,000 per year in energy costs and reduce CO2 emissions by 186 metric tons. The document recommends implementing a campus-wide computer sleep policy and centralizing grid computing projects for increased efficiency.
-IEEE PROJECTS EEE ABSTRACT-Frequency actuated load shedding with auto tripping
Frequency actuated load shedding programs have been implemented across power systems to safeguard systems during periods of declining frequency. These programs automatically disconnect a portion of load equal to or greater than a generation deficiency to maintain balance. Industrial facilities also use load shedding schemes, which have increasingly been integrated with computerized power management systems to provide automated load shedding. To maintain stability, automated load shedding systems are necessary as disturbances can plunge a system into a hazardous state faster than an operator can react. The proposed system implements an embedded system using a PIC microcontroller to constantly monitor frequency changes and disconnect loads according to priority to perform automated load shedding.
Recommended
Dr wattsun E-monitoring
The document introduces Dr WattSun, a new third-party solar PV system monitoring solution for distributed solar systems in India. Existing solutions have issues like high costs, lack of portfolio management capabilities, and expertise requirements. Dr WattSun aims to reduce costs, time, and complexity through a plug-and-play smart hardware device that collects and transmits real-time performance data via the cloud to a software platform for remote monitoring and control. Key features highlighted include single window portfolio management, low costs and scalability, and revenue-grade metering. The system is still in development stages and not ready for purchase yet.
Oracle AWR baseline - Basic
This document provides steps for configuring an AWR baseline using Oracle Enterprise Manager Cloud Control. It details how to:
1. Create a single AWR baseline by selecting a snapshot range and time period.
2. Compute baseline statistics and refresh until the status shows as completed.
3. Set the performance page to show the 99th percentile line using the new baseline.
4. Configure alert thresholds for the baseline by editing metric thresholds.
AVReporter (PEM Energy Analyzer) in practice
Broad range of report and dashboard applications such as KPI reports, Energy Ratings using ABC charting, Energy Use Allocation, Energy by Threshold Limits, Optimization of energy bookings, Energy Consumption Forecasting, Green House Gases reports, CO2 emission calculations, Examination of quality features, Statements of efficiency of the application of renewable energy sources, etc.
www.konsys-international.com
www.twitter.com/avreporter
Automatic performance-diagnosis-and-tuning-in-oracle
Automatic Performance Diagnosis and Tuning in Oracle provides a self-healing database system called Automatic Database Diagnosis Monitor (ADDM) that diagnoses performance issues, finds root causes, and provides recommendations. ADDM collects data using Active Session History on database time, analyzes it using advisors, and provides resolutions to improve performance in a self-managing loop. It was shown to effectively diagnose and resolve a real performance fall at Qualcomm by identifying a problematic SQL statement and recommending an index creation.
Valarie Hines: 2013 Sandia National Laboratoies Wind Plant Reliability Workshop
Valarie Hines: 2013 Sandia National Laboratoies Wind Plant Reliability WorkshopSandia National Laboratories: Energy & Climate: Renewables
Sandia National Laboratories works with wind plant operators and Strategic Power Systems to collect operating data through ORAPWind software in order to benchmark reliability performance and identify improvement opportunities. Preliminary results for the 2013 benchmark show electronics issues remain a key driver of downtime. The benchmark provides metrics on time accounting, power curves, and event frequency versus downtime which require summarized SCADA, event, and work order data organized by time period and wind turbine system. Final 2013 results will be published in October.Low cost weather station with remote control
ieee 2012 projects for m tech btech ece eee embedded systems@ srcembedded solutions- hyderabad.
web:www.srcembedded.com,
ph-8297 313 858
mail:srcembedded@gmail.com
Green Computing at RIT
This document discusses a trial conducted at RIT to reduce computer energy usage. The trial was conducted in the NRH Computer Lab over 11 weeks, with baseline testing for the first 4 weeks and then implementing a sleep policy of 20 minutes for the next 7 weeks. The results showed a reduction in power consumption of 66% compared to baseline. Extrapolating this to all of RIT's computer labs could save between $20,000 to $60,000 per year in energy costs and reduce CO2 emissions by 186 metric tons. The document recommends implementing a campus-wide computer sleep policy and centralizing grid computing projects for increased efficiency.
-IEEE PROJECTS EEE ABSTRACT-Frequency actuated load shedding with auto tripping
Frequency actuated load shedding programs have been implemented across power systems to safeguard systems during periods of declining frequency. These programs automatically disconnect a portion of load equal to or greater than a generation deficiency to maintain balance. Industrial facilities also use load shedding schemes, which have increasingly been integrated with computerized power management systems to provide automated load shedding. To maintain stability, automated load shedding systems are necessary as disturbances can plunge a system into a hazardous state faster than an operator can react. The proposed system implements an embedded system using a PIC microcontroller to constantly monitor frequency changes and disconnect loads according to priority to perform automated load shedding.
ComGen CPnet presentation
The document describes a low-cost remote monitoring solution that gathers operating data from field equipment like compressors and generators. It transmits the data via satellite network to a website where owners can access real-time readings and alarms from any location. This allows for more efficient equipment use through proactive issue response and optimization based on historical performance data.
EAET Capabilities
Encompass Automation LLC provides full-service automation and control systems for the glass industry, including design of process control, instrumentation, electrical power distribution, data collection, and turn-key project installation. They have expertise in automation hardware, software, and electrical systems from 13kV to 120V for batch, furnace, and other glass production processes. Encompass offers modular pre-proven code libraries, engineering services, and project management for glass automation projects.
Metering Energy Consumption in Data Centres - Colin Love
ULCC operates a data center that provides hosting services for external customers. To manage power usage and charge customers appropriately, ULCC meters power at multiple points in the data center. This includes meters on the main panel, in-rack power monitors, and in-rack PDU monitors. ULCC devolves energy budgets to customers to give them more visibility and control over their power usage, while still ensuring overall power demand does not exceed capacity. ULCC aims to continue improving data center efficiency through measures like hot aisle containment and more efficient cooling.
Power grid monitoring solution
www.ivpower.com
IVPower is a software dedicated to real-time monitoring of transmission and distribution grids.
IVPower provides essential information about power system disturbances for control and maintenance purpose.
Using mainly disturbance records and event logs from protection devices, IVPower offers innovative and eay-to-use web-based applications dedicated to operators in control centers, post mortem analysis experts and asset managers.
Wide Area Power System Visualization & Near Real-Time Event Replay Using ...
The document summarizes the development of a wide area power system visualization software using synchrophasor measurements. It describes the objectives to improve situational awareness, the system architecture with data transfer from PDCs to the application server, and techniques used to improve performance for near real-time event replay. Testing of the beta version at TVA is discussed, along with visualization displays for frequency, voltage magnitude, and phase angle. The summary concludes that good progress was made in design, development, and integration testing of the software.
Wireless Technology in the Warehouse
RMS Omega has developed a 3-step process to help companies overcome poor wireless connectivity issues in warehouses. Step 1 involves producing a heat map and site mapping to identify wireless access points, outlets, and signal strengths. Step 2 provides a complete analysis and recommendations based on what works, what needs improvement, and access point configurations. Step 3 is the implementation of recommended solutions such as installing equipment to improve coverage. A robust wireless infrastructure delivers reliable coverage, faster connectivity, and scalability.
OpStor - A multi vendor storage resource management and capacity forecasting ...
It explains the challenges that storage administrators face and how OpStor helps to address them while giving you an overview of the product
LRMM_TG5_1
This document summarizes a poster presentation about using condition monitoring approaches to improve maintenance of wind turbines. It discusses how condition-based maintenance can help reduce costs and improve reliability by identifying faults early. The poster presents an artificial neural network approach to condition monitoring that uses data from a supervisory control and data acquisition system. It also outlines how the condition monitoring information could be utilized for maintenance decision making through a self-evolving maintenance scheduler. The approach is demonstrated in a case study of detecting failures in a wind turbine gearbox.
Project1
This document describes a low-cost SCADA system for an intelligent house. The system allows for visualization and remote operation of house functions like heating, lighting, security sensors, and more. Hardware includes sensors, actuators, and a programmable logic controller. Software is developed in C# on .NET and connects via Ethernet. The system provides integrated monitoring and control to reduce human intervention and costs. It was implemented and tested successfully in a real home.
Site Energy Monitoring Solution
This solution provides all necessary means for equipping your business to have all relevant energy data always centrally available for monitoring & analysis. Energy related data can now always be available at the tip of your hands. The solution can assure some crucial advantages in your company such as:
• constant electric energy monitoring at different sites within the company: • constant gas/water consumption monitoring at different sites within the company • control over power consumption and losses within the company • more reliable operation as well as equipment maintenance • better equipment investment planning based on historic consumption and PQ data • electrical power quality data monitoring • better control over all installed equipment
OpStor version 9.1 - A Walkthrough
OpStor version 9.1 comes with device support for PureStorage and EMC Isilon. With the new SMI-S framework, storage admins can monitor any SMI-S based device with OpStor now. It also comes with a snappy new UI and forecast dashboard to give storage admins the only product to monitor all the storage hardware connected in their environment. This includes monitoring tape libraries, host / backup servers, RAIDs, HBAs, FC and SAN Switches.
Power Plant Performance Monitoring and Trend Analysis
This is a specially designed software for Power Station Performance Monitoring and Trend Analysis. It not only tracks and draws trends of overall plant performance but also capable of monitoring individual generating units performance. In this brochure we have customized this software for an engine based power station but it can be customized for other types of production facilities where continuous monitoring of Key Performance Indicators are required. It can be an ideal tool for any manufacturing industries where multiple generating units are engaged on common task. From overall performance analysis report we know the overall productivity but we cannot detect the defective generating units or those units which are less productive for a long period. By trending individual units productivity we can segregate those units and take necessary measures to improve their performance. This software would be the best solution to manage your operational data.
Web based accessibility will let you access the software and monitor the performance more closely even while you are abroad.
Comgen Power Solutions CPNet Presentation
The document describes a low-cost remote monitoring solution that allows owners to gather operating data from field equipment like compressors and generators from a central location. Data is collected every minute, compressed into hourly averages, and transmitted via satellite every four hours. Owners can then access the data online to track equipment conditions and receive real-time callouts if issues arise, allowing for more efficient equipment use and reduced downtime.
Electrician apprenticeships in brisbane
Electricians are a necessary part of the construction industry; it is they who are liable for the installation, portion, and fix of all electrical systems in all types of progress be its industrial buildings, domestic homes, or trailer buildings. Electricians maintain and install electrical power, lighting, communications, and control systems in houses, businesses, and industries.
Read more:- https://goo.gl/dSBkuQ
Chandrashekar_ Resume - U
Chandrashekar has over 16 years of experience managing quality assurance and control activities in various industries. He is skilled in implementing quality management systems and has experience leading teams to improve productivity, reduce costs, and increase profitability. He is adept at initiating cost saving measures and eliminating inefficiencies. Currently he is the Senior Manager of Business Excellence at Mayur Uniquoters Ltd, where he heads quality assurance and total productive maintenance functions across two plants.
CAGT-IST Student Presentations
Nash equilibrium and Pareto optimality are discussed and compared using examples from game theory. In the Battle of Sexes game, the Nash equilibria coincide with the Pareto efficient outcomes. However, in other games like the Prisoner's Dilemma and the Tragedy of the Commons, the Nash equilibria are not Pareto optimal and there is a possibility of Pareto improvement by playing different strategies. Braess's Paradox is also discussed where adding more resources to a network can paradoxically decrease overall performance at equilibrium due to drivers taking suboptimal routes.
Action media
This document discusses common elements found in action movies including exotic or fictional locations, extreme climates, cities, and motorways. It also notes the use of dramatic non-diegetic sounds, close-ups, high-key lighting, and special effects to create explosions and dramatic effects. Additionally, it mentions physical fights between good and bad characters, killings including the death of loved ones or heroes/villains, sudden outbursts in settings, and massive destruction.
Đề thi Văn KH1 năm 2014 mới nhất
Đề thi Văn KH1 năm 2014 mới nhất giúp học viên hiểu hơn về cách thức ra đề thi môn văn
Drama media
This document provides guidance for filming a drama in compact locations like council estates, flats, workplaces and stores/cafes. It recommends using dull lighting to emphasize a bleak atmosphere, and high and low camera angles to differentiate characters' power and class. Typical props include alcohol, drugs, weapons and technology, while costumes may include casual clothes, uniforms or old fashioned attire. Finally, it stresses that drama films must be accurately structured with climaxes and anti-climaxes to engage audiences with tension peaks and troughs.
Jumadinova distributed pm_slides
Presentation slides from our paper on using partially observable stochastic games for information aggregation
Đề thi Anh Văn 11 HK2 - 2014
Đề thi Anh Văn 11 HK2 - 2014 do trung tâm luyện thi Đại Học Trí Nhân sưu tầm để giúp các bạn có thêm kiến thức tổng quan
Mọi chi tiết liên hệ : http://luyenthidaihocdn.com/
3 bayesian-games
The document discusses games with incomplete information and how they are modeled. It notes:
- Games in the real world often have incomplete information where players do not know each other's payoffs or strategies.
- Harsanyi's approach models incomplete information using random variables for each player's preferences that are privately observed but have a commonly known probability distribution. This transforms incomplete information into imperfect information.
- A Bayesian game formally represents this setting, where a player's utility depends on their type drawn from a probability distribution. A Bayesian Nash equilibrium requires optimal strategies given beliefs over other players' types.
More Related Content
What's hot
ComGen CPnet presentation
The document describes a low-cost remote monitoring solution that gathers operating data from field equipment like compressors and generators. It transmits the data via satellite network to a website where owners can access real-time readings and alarms from any location. This allows for more efficient equipment use through proactive issue response and optimization based on historical performance data.
EAET Capabilities
Encompass Automation LLC provides full-service automation and control systems for the glass industry, including design of process control, instrumentation, electrical power distribution, data collection, and turn-key project installation. They have expertise in automation hardware, software, and electrical systems from 13kV to 120V for batch, furnace, and other glass production processes. Encompass offers modular pre-proven code libraries, engineering services, and project management for glass automation projects.
Metering Energy Consumption in Data Centres - Colin Love
ULCC operates a data center that provides hosting services for external customers. To manage power usage and charge customers appropriately, ULCC meters power at multiple points in the data center. This includes meters on the main panel, in-rack power monitors, and in-rack PDU monitors. ULCC devolves energy budgets to customers to give them more visibility and control over their power usage, while still ensuring overall power demand does not exceed capacity. ULCC aims to continue improving data center efficiency through measures like hot aisle containment and more efficient cooling.
Power grid monitoring solution
www.ivpower.com
IVPower is a software dedicated to real-time monitoring of transmission and distribution grids.
IVPower provides essential information about power system disturbances for control and maintenance purpose.
Using mainly disturbance records and event logs from protection devices, IVPower offers innovative and eay-to-use web-based applications dedicated to operators in control centers, post mortem analysis experts and asset managers.
Wide Area Power System Visualization & Near Real-Time Event Replay Using ...
The document summarizes the development of a wide area power system visualization software using synchrophasor measurements. It describes the objectives to improve situational awareness, the system architecture with data transfer from PDCs to the application server, and techniques used to improve performance for near real-time event replay. Testing of the beta version at TVA is discussed, along with visualization displays for frequency, voltage magnitude, and phase angle. The summary concludes that good progress was made in design, development, and integration testing of the software.
Wireless Technology in the Warehouse
RMS Omega has developed a 3-step process to help companies overcome poor wireless connectivity issues in warehouses. Step 1 involves producing a heat map and site mapping to identify wireless access points, outlets, and signal strengths. Step 2 provides a complete analysis and recommendations based on what works, what needs improvement, and access point configurations. Step 3 is the implementation of recommended solutions such as installing equipment to improve coverage. A robust wireless infrastructure delivers reliable coverage, faster connectivity, and scalability.
OpStor - A multi vendor storage resource management and capacity forecasting ...
It explains the challenges that storage administrators face and how OpStor helps to address them while giving you an overview of the product
LRMM_TG5_1
This document summarizes a poster presentation about using condition monitoring approaches to improve maintenance of wind turbines. It discusses how condition-based maintenance can help reduce costs and improve reliability by identifying faults early. The poster presents an artificial neural network approach to condition monitoring that uses data from a supervisory control and data acquisition system. It also outlines how the condition monitoring information could be utilized for maintenance decision making through a self-evolving maintenance scheduler. The approach is demonstrated in a case study of detecting failures in a wind turbine gearbox.
Project1
This document describes a low-cost SCADA system for an intelligent house. The system allows for visualization and remote operation of house functions like heating, lighting, security sensors, and more. Hardware includes sensors, actuators, and a programmable logic controller. Software is developed in C# on .NET and connects via Ethernet. The system provides integrated monitoring and control to reduce human intervention and costs. It was implemented and tested successfully in a real home.
Site Energy Monitoring Solution
This solution provides all necessary means for equipping your business to have all relevant energy data always centrally available for monitoring & analysis. Energy related data can now always be available at the tip of your hands. The solution can assure some crucial advantages in your company such as:
• constant electric energy monitoring at different sites within the company: • constant gas/water consumption monitoring at different sites within the company • control over power consumption and losses within the company • more reliable operation as well as equipment maintenance • better equipment investment planning based on historic consumption and PQ data • electrical power quality data monitoring • better control over all installed equipment
OpStor version 9.1 - A Walkthrough
OpStor version 9.1 comes with device support for PureStorage and EMC Isilon. With the new SMI-S framework, storage admins can monitor any SMI-S based device with OpStor now. It also comes with a snappy new UI and forecast dashboard to give storage admins the only product to monitor all the storage hardware connected in their environment. This includes monitoring tape libraries, host / backup servers, RAIDs, HBAs, FC and SAN Switches.
Power Plant Performance Monitoring and Trend Analysis
This is a specially designed software for Power Station Performance Monitoring and Trend Analysis. It not only tracks and draws trends of overall plant performance but also capable of monitoring individual generating units performance. In this brochure we have customized this software for an engine based power station but it can be customized for other types of production facilities where continuous monitoring of Key Performance Indicators are required. It can be an ideal tool for any manufacturing industries where multiple generating units are engaged on common task. From overall performance analysis report we know the overall productivity but we cannot detect the defective generating units or those units which are less productive for a long period. By trending individual units productivity we can segregate those units and take necessary measures to improve their performance. This software would be the best solution to manage your operational data.
Web based accessibility will let you access the software and monitor the performance more closely even while you are abroad.
Comgen Power Solutions CPNet Presentation
The document describes a low-cost remote monitoring solution that allows owners to gather operating data from field equipment like compressors and generators from a central location. Data is collected every minute, compressed into hourly averages, and transmitted via satellite every four hours. Owners can then access the data online to track equipment conditions and receive real-time callouts if issues arise, allowing for more efficient equipment use and reduced downtime.
What's hot (13)
Metering Energy Consumption in Data Centres - Colin Love
Metering Energy Consumption in Data Centres - Colin Love
Wide Area Power System Visualization & Near Real-Time Event Replay Using ...
Wide Area Power System Visualization & Near Real-Time Event Replay Using ...
OpStor - A multi vendor storage resource management and capacity forecasting ...
OpStor - A multi vendor storage resource management and capacity forecasting ...
Power Plant Performance Monitoring and Trend Analysis
Power Plant Performance Monitoring and Trend Analysis
Viewers also liked
Electrician apprenticeships in brisbane
Electricians are a necessary part of the construction industry; it is they who are liable for the installation, portion, and fix of all electrical systems in all types of progress be its industrial buildings, domestic homes, or trailer buildings. Electricians maintain and install electrical power, lighting, communications, and control systems in houses, businesses, and industries.
Read more:- https://goo.gl/dSBkuQ
Chandrashekar_ Resume - U
Chandrashekar has over 16 years of experience managing quality assurance and control activities in various industries. He is skilled in implementing quality management systems and has experience leading teams to improve productivity, reduce costs, and increase profitability. He is adept at initiating cost saving measures and eliminating inefficiencies. Currently he is the Senior Manager of Business Excellence at Mayur Uniquoters Ltd, where he heads quality assurance and total productive maintenance functions across two plants.
CAGT-IST Student Presentations
Nash equilibrium and Pareto optimality are discussed and compared using examples from game theory. In the Battle of Sexes game, the Nash equilibria coincide with the Pareto efficient outcomes. However, in other games like the Prisoner's Dilemma and the Tragedy of the Commons, the Nash equilibria are not Pareto optimal and there is a possibility of Pareto improvement by playing different strategies. Braess's Paradox is also discussed where adding more resources to a network can paradoxically decrease overall performance at equilibrium due to drivers taking suboptimal routes.
Action media
This document discusses common elements found in action movies including exotic or fictional locations, extreme climates, cities, and motorways. It also notes the use of dramatic non-diegetic sounds, close-ups, high-key lighting, and special effects to create explosions and dramatic effects. Additionally, it mentions physical fights between good and bad characters, killings including the death of loved ones or heroes/villains, sudden outbursts in settings, and massive destruction.
Đề thi Văn KH1 năm 2014 mới nhất
Đề thi Văn KH1 năm 2014 mới nhất giúp học viên hiểu hơn về cách thức ra đề thi môn văn
Drama media
This document provides guidance for filming a drama in compact locations like council estates, flats, workplaces and stores/cafes. It recommends using dull lighting to emphasize a bleak atmosphere, and high and low camera angles to differentiate characters' power and class. Typical props include alcohol, drugs, weapons and technology, while costumes may include casual clothes, uniforms or old fashioned attire. Finally, it stresses that drama films must be accurately structured with climaxes and anti-climaxes to engage audiences with tension peaks and troughs.
Jumadinova distributed pm_slides
Presentation slides from our paper on using partially observable stochastic games for information aggregation
Đề thi Anh Văn 11 HK2 - 2014
Đề thi Anh Văn 11 HK2 - 2014 do trung tâm luyện thi Đại Học Trí Nhân sưu tầm để giúp các bạn có thêm kiến thức tổng quan
Mọi chi tiết liên hệ : http://luyenthidaihocdn.com/
3 bayesian-games
The document discusses games with incomplete information and how they are modeled. It notes:
- Games in the real world often have incomplete information where players do not know each other's payoffs or strategies.
- Harsanyi's approach models incomplete information using random variables for each player's preferences that are privately observed but have a commonly known probability distribution. This transforms incomplete information into imperfect information.
- A Bayesian game formally represents this setting, where a player's utility depends on their type drawn from a probability distribution. A Bayesian Nash equilibrium requires optimal strategies given beliefs over other players' types.
4 mechanism design
Multiple agents contribute private resources towards a shared outcome. Each agent's contribution reveals private information about their preferences. The goal is to incentivize agents to reveal their true private information so that the shared outcome can be the most efficient option for all agents. However, without the right mechanism in place, agents may not be truthful about their private information if revealing it does not maximize their own utility. Game theory can be used to analyze these situations and design mechanisms where truth-telling is an optimal strategy for agents.
Women's health - Hormones from puberty and beyond
This document discusses various aspects of women's hormone health from puberty to menopause. It provides information on common hormone-related conditions such as polycystic ovarian syndrome, endometriosis, hyperthyroidism, hypothyroidism, depression, fertility issues, and adrenal fatigue. It also discusses the role of essential oils such as clary sage, frankincense, and blends like Dragon Time and EndoFlex in supporting hormone balance. The document outlines Young Living's seed to seal process for ensuring high quality essential oils through organic cultivation and distillation methods.
1 intro game-theory
This document provides an overview of a workshop on computational aspects of game theory held from June 16-20, 2014 at the Indian Statistical Institute Kolkata. The workshop was organized by Raj Dasgupta and covered topics including normal form games, Bayesian games, mechanism design, and coalition games. Students presented on topics from the workshop and worked on programming tools for solving game theory problems.
Laporan Hasil Praktikum Biologi Uji Makanan
Praktikum menguji kandungan gizi tahu menunjukkan bahwa tahu mengandung protein dan lemak tetapi tidak mengandung karbohidrat berupa glukosa dan amilum.
Electrician Trainee FAQ
The document provides information about the Electrician Trainee Program run by ABC NorCal. It details that to legally work as an electrician in California, one must be certified, an apprentice, or a registered electrician trainee enrolled in an approved program. The program outlines the steps to enroll, including enrolling with ABC NorCal and registering with the state, renewing registration annually. It answers common questions about the differences between trainees and apprentices, specifics of California law, expected timelines for enrollment confirmation and receiving a trainee card from the state, and penalties for working without registration.
hawthorne experiment
The Hawthorne experiments were a series of studies conducted between 1924-1932 at the Western Electric plant in Chicago. The experiments studied how changes in workplace conditions, such as illumination levels, rest breaks, and supervision styles, affected worker productivity. They found that productivity increased regardless of the changes, likely due to the motivational impact of being observed and feeling valued by management.
Viewers also liked (15)
Similar to Electrical network monitoring
GridPIQ_Webinar_2018_08_28.pptx
This document introduces the Grid Project Impacts Quantification (GridPIQ) web calculator, which allows users to model and screen grid projects. GridPIQ is a publicly available screening tool that uses transparent methodologies and data sources to calculate various impacts of technologies like energy storage, PV, and efficiency measures. Users input basic project details and GridPIQ returns results within seconds on impacts like emissions, ramping needs, and peak power reduction. The document demonstrates GridPIQ's functionality through examples of modeling a distribution feeder control scheme and energy storage project. It also outlines GridPIQ's modeling approaches for various technologies and calls for users to provide feedback to help improve the tool.
Wide Area Monitoring System WAMS & Applications
Wide area monitoring systems (WAMS) are essentially based on the new data acquisition technology of phasor measurement and allow monitoring transmission system conditions over large areas in view of detecting and further counteracting grid instabilities.
1293702-1578722-diegoramos-1.pptx
The document discusses several types of electrical power system software used for modeling and analysis, including Matlab, NEPLAN, Easy Power, SPARD, Powerworld, and DigSILENT. It provides brief descriptions of the capabilities and uses of each program. For example, Matlab allows simple simulations but lacks detailed electrical modeling, while NEPLAN offers web-based analysis of power, water, gas and district heating networks. The document concludes that the choice of software depends on the required analysis and system complexity.
Power Plant Software - Get Insights!.
Power plant software refers to computer programs and applications that are designed to manage and optimize the operations of power plants. These software solutions can include features such as real-time monitoring of plant performance, predictive maintenance, asset management, data analytics, and reporting. They help improve plant efficiency, reduce downtime, and enhance overall plant performance.
The Complete Guide to Power Plant Software.
Our sustainable energy future depends on complete electrification and a reliable supply of renewable energy. Heat pumps are added to every home as electric vehicles replace the road. This leads to an increase in electricity demand. However, the new energy supply from solar and wind is intermittent, making it challenging to consistently deliver the energy peak produced by electrification.
Techugo an on demand app development company provides software stack for businesses. The software falls under the Residential DER category and is generally divided into three parts.
Intelligent management of electrical systems in industries
This document discusses the intelligent management of electrical systems in industries. It notes that while industrial plants have increasingly automated processes, electricity distribution networks have not seen as much focus on automation. Disturbances in power supply can be very costly. The document then outlines some intelligent applications that are needed, including handling large amounts of information, illustrating complex dependencies, and giving operators instructions in fault situations. It describes distribution management functions like real-time monitoring, state estimation, topology management, and loss minimization. Finally, it concludes that while industrial distribution faces different challenges than public distribution, intelligent software methods can be promising.
calidad de energia
This document discusses how digitizing electrical distribution through power quality monitoring, correction, compliance, and data quality management solutions can help ensure reliability of critical infrastructure and equipment. Permanent power quality monitoring provides visibility into issues to understand their impacts, while correction solutions protect sensitive assets from disturbances. Compliance with standards is also ensured through continuous monitoring. Maintaining accurate system configuration and data quality over the lifetime of the system enables reliable decision making.
PSR Using ANNs
This is about restoration of power after major power failures/ outages happen by using ANN technique.
Datasheet Fluke 6135A/PMUCAL. Hubungi PT. Siwali Swantika 021-45850618
Datasheet Fluke Phasor Measurement Unit Calibration System. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
2014 PV Performance Modeling Workshop: Optimizing PV Designs with HelioScope:...
2014 PV Performance Modeling Workshop: Optimizing PV Designs with HelioScope:...Sandia National Laboratories: Energy & Climate: Renewables
2014 PV Performance Modeling Workshop: Optimizing PV Designs with HelioScope: Paul Gibbs, Folsom LabsRT15 Berkeley | End-to-End Simulation Solution for Smart Grids Applications -...
RT15 Berkeley | End-to-End Simulation Solution for Smart Grids Applications -...OPAL-RT TECHNOLOGIES
This document discusses end-to-end simulation solutions for smart grid applications from ETAP and Opal-RT. It provides an overview of ETAP software products including ETAP, ETAP Real-Time, and ETAP Grid which enable design, simulation, analysis, optimization and operation of power systems. It also describes how the companies can provide a complete solution by integrating ETAP software with Opal-RT's hardware-in-the-loop simulation to reduce risk and cost for grid automation projects. Examples of joint projects with clients are summarized.Machine Learning for a dynamic sizing of Elia balancing reserves!
During Grid Analytics Europe 2018, Elia and N-SIDE have presented how machine learning algorithms enable a dynamic dimensioning of balancing reserves.
Technical Assumptions Used in PV Financial Models: Review of Current Practice...
Photovoltaic (PV) financial models are used by project developers, banks and asset managers to evaluate the profitability of a PV project. This work presents an overview of current practices for financial modelling of PV investments and reviews them in view of technical and financial risks during the different phases of a PV project. This webinar presents the results from the International Energy Agency (IEA) Photovoltaic Power Systems Programme (PVPS) Task 13 Subtask 1. The webinar focuses on establishing common practices for translating the technical parameters of performance and reliability into financial terms. The presentations give a comprehensive set of practical guidelines and recommendations for mitigating and hedging financial risks in a PV investment. The report Technical Assumptions Used in PV Financial Models – Review of Current Practices and Recommendations can be downloaded here: http://www.iea-pvps.org/index.php?id=426
The Wattminder Vision2009
Business plan abstract for wattminder.com--an software-IT with electronics to assure revenue for solar power plant operators
CEP-SCADA Brochure-rev
A SCADA system can help companies make better decisions faster by monitoring and controlling both power and manufacturing processes. CE Power offers cross-platform SCADA solutions that combine data from production equipment and electrical distribution systems to optimize power distribution and increase manufacturing efficiency. With over 15 years of experience providing electrical engineering services, CE Power can help design and implement customized SCADA solutions that reduce costs, streamline operations, and improve safety.
15ee81 module1[www.vtuloop.com].pdf
The document discusses the operation of power systems and control centers. It provides background on how electricity is generated and transmitted on a large scale to power grids. Control centers use SCADA systems and digital computers to monitor the entire power system in real time, control generation and transmission equipment, and ensure reliable and economic operation of the grid. Key functions of control centers include automatic generation control, economic dispatch, system security, and load forecasting. Critical data is acquired from sensors every 2 seconds to track the state of the power system.
artiicial intelligence in power system
This document provides an overview of artificial intelligence techniques and their applications in power systems. It discusses expert systems, artificial neural networks, and fuzzy logic systems as the three major AI techniques used. It describes how each technique works and its advantages/disadvantages. The document also gives examples of how these techniques can be applied in transmission lines, power system protection, and other areas like operations, planning, control, and automation of power systems. The conclusion states that while AI shows promise for improving power system efficiency and reliability, more research is still needed to fully realize its benefits.
Wanted!: Open M&S Standards and Technologies for the Smart Grid - Introducing...
Title:
Wanted! - Open M&S Standards and Technologies for the Smart Grid
Subtitle:
Introducing the Open Source iTesla Power Systems Modelica Library and the RaPId Toolbox for Model Identification and Validation
Abstract:
Modeling and Simulation (M&S) technologies have a broad set of applications in power systems, from infrastructure planning, through real-time testing of components, and even for training operators to use decision support systems. However, power system M&S technologies face a great challenge to meet when designing, testing, operating and controlling cyber-physical and sustainable electrical energy systems and components, a.k.a “Smart Grids”.
The speaker claims that open M&S standards can have a large role to play in the development of Smart Grids. This claim will be justified with three examples.
The first example describes the experience gained during the EU FP7 iTesla project where the iTesla Power Systems Modelica Library (iPSL) was designed using the Modelica language. The Modelica language, being standardized and equation-based, has proven valuable for the project for model exchange, and even simulation of actual power networks.
Within the iTesla project, the KTH SmarTS Lab research group has been also applying the FMI standard for model exchange in order to develop a software prototype called RaPId. The RaPId Toolbox aims to provide a “virtual laboratory” to solve parameter identification and model validation problems for any kind of model represented in an FMU, but specifically, for power systems.
The third example comes from a collaboration with Xogeny. It will be shown how it is possible to exploit the FMI to decouple the model from the simulator tool, and thus, exploit the model in unforeseen ways. This shows that is possible develop customized and stand-alone analysis tools using web technologies, giving analyst more time for “analysis”. This approach has an enormous potential for typical analysis applications, but even more, for education.
Forecasting & Planning
Power system planning involves arranging a scheme beforehand to adequately satisfy future load requirements. It determines new and upgraded generation, transmission, and distribution elements. Load forecasting is an important part of planning to estimate future loads. Short term forecasting is used for operations while long term forecasting informs infrastructure development decisions. Various statistical, artificial intelligence, and hybrid methods are used for load forecasting at different timescales, each with their own advantages and limitations regarding accuracy. Accurate load forecasting is essential for utility planning and operations.
Numerical Relaying.pptx
Numerical relays provide several advantages over electromechanical and solid state relays including improved reliability, flexibility, and performance. They allow for advanced protection schemes through programming and use of microprocessors. Numerical relays also simplify interfacing with current and potential transformers, enable advanced functions like phasor measurement, and provide time-stamped fault data for analysis. Their main advantages are reliability, security, dependability, and ability to implement new protection schemes through programming.
Similar to Electrical network monitoring (20)
Intelligent management of electrical systems in industries
Intelligent management of electrical systems in industries
Datasheet Fluke 6135A/PMUCAL. Hubungi PT. Siwali Swantika 021-45850618
Datasheet Fluke 6135A/PMUCAL. Hubungi PT. Siwali Swantika 021-45850618
2014 PV Performance Modeling Workshop: Optimizing PV Designs with HelioScope:...
2014 PV Performance Modeling Workshop: Optimizing PV Designs with HelioScope:...
RT15 Berkeley | End-to-End Simulation Solution for Smart Grids Applications -...
RT15 Berkeley | End-to-End Simulation Solution for Smart Grids Applications -...
Machine Learning for a dynamic sizing of Elia balancing reserves!
Machine Learning for a dynamic sizing of Elia balancing reserves!
Technical Assumptions Used in PV Financial Models: Review of Current Practice...
Technical Assumptions Used in PV Financial Models: Review of Current Practice...
Wanted!: Open M&S Standards and Technologies for the Smart Grid - Introducing...
Wanted!: Open M&S Standards and Technologies for the Smart Grid - Introducing...
Recently uploaded
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Recently uploaded (20)
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
gray level transformation unit 3(image processing))
gray level transformation unit 3(image processing))
Electrical network monitoring
- 1. Energy-safety project Nizhny Novgorod, 2014 Electrical network monitoring
- 2. Energy efficienty problemsEnergy efficienty problems P,Q P,Q P,Q P,Q,Pг P,Q P,Q • There are a lot of inactive power in power network — reactive power, harmonic distortion, asymmetry; •You can not use you power network in project loads with reactive power; • Asymmetry leads to voltage non-stability; • Harmonic distortion reduces installations resource; • There are some special compensation systems to solve this problemsThere are some special compensation systems to solve this problems; P,QPг
- 3. EfficientEfficient predictionprediction softwaresoftware • The software models different emergency situations and predict faults; • System create recommendation list about efficiency and equipment; • Software can take real data from the power networks and analyze it; •Some cloud features can compare result with knowledge base; • Software saves you time and money.
- 4. Power Network monitoring systemPower Network monitoring system •Continuous monitoring can help with controlling power system status: • We can use it on power distribution substation or on factory supply system; • System does recommendations about compensation equipment and work modes; • System can safe money for electricity more efficient, more intellectual; •We can monitoring equipment state and predict faults on basic information; •We can do intellectual power distribution inside and outside the system; • We have all cloud features with this system. It may be usefull :) P SCADA level Power level
- 5. Russian Federation Nizhny Novgorod Larina 22, lit 1D of 12 Tel: +7(831)-275-88-61 +7(987)-756-73-38 E-mail: pcb@rlntech.org http://rlntech.org