1. CURRICULUM VITAE
MD LATEEFUR RAHMAN
Mobile No: +91 8877772611/ +91-9006612746
Email : mdlateefur786@gmail.com, Skyp Id: md.lateefur1
Applying for the job of- E & I QA QC INSPECTOR
Career profile
An E & I professional with expertise in Electrical & process instrumentation
maintenance, erection & commissioning, in refinery, oil & gas field & petrochemical
industry.
During 06 years experience, acquired thorough knowledge of Electrical & instrument
maintenance/installation, calibration, and loop check.
Project execution, pre-commissioning & commissioning activities.
Conversant with Installation & Pre-comm. of transformers, switchgears, distribution
boards, UPS, motors, LV, MV Cables etc Pump houses And in Instrumentation
Pneumatic and Electronic Instruments like Differential Pressure, Level, Temperature
Flow Transmitter, Control Valves, Controllers, Pressure, Temperature, and Flow & Level
Switches. Turbine flow meter. Routinely calibrated & configured smart series Instruments
with HART Communicator also good knowledge about the workshop calibration
Instruments.
Presently managing Electrical & Instrumentation Quality Control as TPI QA/QC E & I
Inspector at Shah Gas Development Program (SGD), Abu Dhabi, and Last Project Sadara
Dow Chemical Project Aramco Saudi Arabia.
Professional Experience
Acquired experience of F&G Instruments like IR/UV Flame Detector, Line of Sight
(open path) Gas Detector, Point Gas Detectors, Manual Call Points, Smoke/Heat
Detectors, Beacons and Sounders and Building Fire & Security etc.
Preparing Project Quality Plan, ITPs, Inspection & Test forms.
Preparation of punch list and outstanding work list for follow up for implementation.
Fully Conversant with Supervision for Installation, testing & commissioning of
Equipment’s.
Monitor & verify contractors work progress for progress payments & issuing payment
certificates.
Receiving material inspection according to approved document. Handling, Storage of
material under controlled temperatures and humidity.
Coordinating with vendors/contractors during performance & reliability tests.
Day to day planning and organizing Inspection and testing activities at site.
Ensuring Inspection & Testing activities are done as per ITPs.
Review technical standards for Equipment’s, materials, construction as laid down in
project specifications, final documents like red line mark-ups, as-built.
Maintaining all QA/QC Records (Inspection Requests, Materials & Installation Inspection
Check sheets, Test Records, NCRs, Snag lists etc.) at site.
Identifying NCRs/Defects/Snags and Follow-up with construction team for effective
Corrective & Preventive action on the same.
Liaising with Client for Inspection Request submission and organizing Inspection.
2. Working closely with other departments at site for effective implementation of Project
Quality Plan and ISO 9001 requirements.
Attending Site coordination meeting with client and follow-up for Quality related issues.
Carrying out Inspection works related to preparation of works, contract specifications,
approved construction drawings and manufacturers recommendations.
Ensure that the work is progressing as per the approved schedule.
Ensure implementation of all safety procedures and measures related to the nature of the
works carried out are in accordance with the approved HSE plan, safety rules and
procedures.
To co-ordinate with client, Site supervisors and subcontractors/vendors for safe and
proper execution of works.
To control/ maintain all the safety measures are as per client safety guidelines and
approved project HSE plan.
Experienced in Foundation Field bus system of Yakogawa (CS 3000) and FF Instruments.
Familiar with basic fundamentals of Foundation Field bus system (Installation, Cabling,
Calibration, Loop testing etc.).
The QC inspections coverage mainly includes electrical works such as installation of
raceway, cabling, wiring of power, installation of wiring devices, grounding system.
Installation Inspection of electrical panel boards, small power and lighting, junction
boxes, battery charger and UPS system.
Responsible for the QC inspection activities of all electrical installations including
wiring, termination, meggering, testing loop checking and pre-commissioning of the
systems of the electrical equipments, including cabling and wiring (Power/Control/Instr.)
L.V. and M .V. motors, switch gears, MCC, transformer, UPS system fire
detecting/alarm systems.
Inspecting / defining related materials per Scope of Work and drawings; solving
engineering related problems and securing the approval/concurrence from concerned
engineer before execution.
Develop Quality Control and Test Procedures for Instrument activities.
Inspect and monitor Project Activities (Calibration, Testing, and Installation of
Instruments), cable testing (Insulation, continuity test) and all Instrument construction
activities, generate test reports and obtain approval from client.
Interact with the construction Department and review the method statements submitted by
them for Instrumentation works.
Prepare surveillance reports about any deficiencies in site and send to all concerned
Engineers for rectification and if no action taken transfer this to SDR / NCR after
discussion with QA/QC Manager.
Follow client standards in the inspection and certify field construction activities.
Act as resource base during pre-commissioning & commissioning activities for start-up.
Prepare punch list and monitor the punch list completion
Leading the loop checking teams, identifying the punch points to fix them ahead of walk
through with client.
Inspect incoming materials, local / foreign purchased items, vendor supplied materials as
per specifications/tolerances and maintains inspection record of Purchase Orders (LPO /
FPO) and Mill Certificates, ensure proper unloading, storage and preservation.
Generate Inspection rejection reports of non-conforming materials and promptly report to
Material Engineer and Procurement Departments, joint venture counter part and
quarantine the rejected material.
3. Issue OSDR (Over, Shortage & Damage Report) upon finding any deficiency between
Packing list, Delivery report and actual received Material and send to
Materials/Procurement Departments.
Coordinating the subcontractor construction and Inspection activities with the operations
to avoid any interference with the existing plant operations.
Checking P&I diagrams along with isometric drawings; ensuring adherence to ISO quality
standards and documentation.
QA Activities & Reporting:
Make sure all QC documentation is carried out as per company's Quality Policy and
Clients specification.
Make sure all QC drawings, Documents (Soft & Hard Copy) is of latest Revision.
Conduct internal QA Audits with QA Engineer for all QC Disciplines and co-ordinate
with QA Engineer for Third Party Audits as per ISO requirements.
Prepare daily activity report and Incoming material inspection report at shift ends and
submit to the QA/QC Manager.
Review mechanical completion dossier of all the non-process static & dynamic and
process dynamic systems.
Responsibilities:
Ensuring the necessary levels of reliability in equipment and systems are reached by the
correct specification of requirements through to proper installation, commissioning and
test.
Coordinate site installation and commissioning work to ensure strict compliance with
standards & specifications.
Ensuring that the all electrical construction activities like installation, loop checks,
completions
and pre-commissioning of the Electric works are carried out by Contractors in
accordance with approved Procedures, Specifications, Method Statements, Project
Specifications, Project Procedures and relevant international Codes & Standards.
Receive and review daily reports from inspectors, review the same and provide technical
guidance wherever required.
Ensure that the documentation for certification is verified by all concerned.
Witness Electrical Test such as Meggering/Insulation Test and High Pot Test for 64KV,
35KV, 15KV, 13.8KV & 3.3KV High ,Medium and Low Voltage, Switchgear ,Bus duct,
Power cables, Transformers and Motors.
Functional Test of the Transformer, Motors, Switchgears, MCC, and Lighting & Power
Panels.
Organized testing and Calibration of Gauges, Electronic / Pneumatic Transmitters,
Controllers, Switches, Indicators, Control Valves, and Shutdown / Blow-down Valves.
Tested and commissioned Fire & Gas detection systems, including smart Fire and Gas
Detectors, Line of Sight Gas Detectors.
Directed the loop testing and commissioning activities of Central Plant and Remote
Stations and Well Heads.
Generated calibration & Loop checking report sheets.
Testing and calibration of PSV’s.
Monitored the installation of field instruments with relevant Hook-ups, conducted
Pressure / Leak tests for Instrument Air / Impulse lines.
4. Designed and implemented plant modifications /organized maintenance and Plant Shut
Down activities.
Carried out routine check up of Analyzers (HC, CO, Moisture, and Gas Chromatograph)
and Fire & Gas Instruments (LoS, Metro & oil & Gas Project, UV/IR Flame Detectors,
Manual Call Points, Sounders etc.
GULF EXPERIENCE : 02 YEARS
(1)PETROFAC
Project : Project 193: FFD Asab
Position : E & I QA/QC INSPECTOR
Period : 03.06.2013 TO 05.06.2015
INDIAN EXPERIENCE : 04 YEARS
(1)TECHNIMONT ICB
Project : Reliance Industries LTD.
Position : E & I QA/QC INSPECTOR
Period : 06.08.2015 TO 03.10.2016
(2)CHANG WOON E&C RAIPUR
Project : GMR POWER PROJECT RAIPUR
Position : E & I QA/QC INSPECTOR
Period : 16.10.2012 TO 18.05.2013
(3)LARSEN & TOUBRO LTD
Project : Tata Iron Steel Co, Jamshedpur, Jharkhand
Position : E & I QA/QC INSPECTOR
Period : 05.01.2010 TO 20.09.2012
Academic
S.S.C Passed.
Diploma in Instrument Engineering (Jharkhand).
IT’S Skills:
MS Excel, Word, Access, Power Point, Windows, MS outlook, MS Share Point etc
Languages Known
English, Hindi, Urdu & Arabic
Personal Profile
Passport Details
Passport No. : N 0738804(ECNR)
Issued from : PATNA
Date of issue : 29.06.2015
Date of expiry : 28.06.2025
Personnel Details
Name : MD LATEEFUR RAHMAN
Fathers Name : Maulana Azizur Rahman
Sex : Male
Nationality : Indian
Religion : Muslim
Marital Status : Unmarried
Permanent address : Md Lateefur Rahman
S/O, Maulana Azizur Rahman
Vill + Post- Adsar,
Dist- Jamui, State- Bihar(811307)
Cell No. +91-8877772611
Present address : Md Lateefur Rahman
5. V.B Nagar, L.I.G Colony, Pipe Road,
Kurla (W), Mumbai-400070
Cell No. +91-9006612746
DECLARATION
I hereby declare that the information mentioned above is true to the best of my knowledge
and belief. Anticipating your earlier and favourable response in this regard, for this kinds of
yours I shall remain grateful to you forever,
Md Lateefur Rahman
6. V.B Nagar, L.I.G Colony, Pipe Road,
Kurla (W), Mumbai-400070
Cell No. +91-9006612746
DECLARATION
I hereby declare that the information mentioned above is true to the best of my knowledge
and belief. Anticipating your earlier and favourable response in this regard, for this kinds of
yours I shall remain grateful to you forever,
Md Lateefur Rahman