Mohammed Adnan Ahmed is applying for the position of Structural Engineer. He has over 2 years of experience as a Structural Design Engineer in Bangalore, India. His responsibilities in his current role include analyzing and designing buildings using software like ETABS, STAAD PRO, and SAFE. He holds a Bachelor's and Master's degree in Civil Engineering. Some of his ongoing projects include designing a 200-bed multi-specialty hospital, Tumkur Institute of Medical Science, and a District Court complex. He is looking to further develop his skills and experience in structural engineering.
The document is a report on an industrial training project at a hospital construction site in Chennai by URC Constructions Private Limited. It provides details of the project such as constructing a basement parking facility, 8 floors and other areas on a site located in Perungudi, Chennai. It describes the soil conditions, foundation design, construction stages, safety measures, and estimates for the project. The traineeship provided hands-on experience in construction practices, challenges, and learning.
David Minja completed an 8-week industrial training report with Bade Contractors (T) LTD. The report summarized activities in each week, including concrete casting, foundation work, block laying, steel fixation, and septic tank construction. It concluded that the training provided valuable practical experience in construction tasks and helped bridge the gap between classroom theory and real-world work. Some challenges encountered on site were also noted.
Project on construction of 3 block house reportHagi Sahib
The document is a project report submitted by Blessings Builders (Pvt.) Limited for the construction of three hostel blocks at UET Peshawar Jalozai Campus. It includes an acknowledgement, executive summary, table of contents, and details of the project charter, requirements collection and scope definition, payment schedule, bill of quantities, and project plan. The project plan outlines the various construction activities that will be undertaken to complete the project within the approved budget of 30 million Pakistani rupees and timeframe of 788 calendar days.
IBS - Individual Assignment (Time comparison between IBS & traditional constr...Haziq1511
This document compares the time and speed of construction between cast-in-situ and industrialized building system (IBS) methods. It finds that IBS is typically faster, especially during the building erection phase, as prefabricated components can be assembled more quickly on site than pouring and curing concrete. However, both methods have similar timelines for design, planning and site preparation. The document also notes some potential delays for IBS, such as weather issues during erection or difficulties adapting to late design changes. Overall, IBS is concluded to be faster, but cast-in-situ may be preferable for certain building designs.
Major projects aluminium of formwork civil engineeringGopal jakhar
The document is a project report on aluminium formwork submitted by Gopal Jakhar to his professor Ambesh Ratnu. It discusses the necessity of aluminium formwork systems for mass housing construction in India, where it can maintain quality and speed at a high level. Key features include its reuseability, lightweight panels that require minimal equipment, and ability to form load-bearing walls and other building components faster than traditional construction methods.
- The document summarizes an internship report for a construction project of a regional office building for the Employers State Insurance Corporation.
- Key details include the project involved construction of a G+6 building over 11852 sqm of land at an estimated cost of 70.99 crore rupees, though it was delayed by 4 years.
- During the internship, the student gained experience in site execution, documentation, reconciliation, and contracts by coordinating painting, plastering, and tiling work and managing labor.
The document discusses the planning and roles of architecture and civil engineering in multi-storey building construction. It outlines that architects plan and design buildings while considering aesthetics, functionality, and safety. Civil engineers ensure infrastructure is designed, constructed, and maintained safely, functionally and economically. The document also provides examples of software used in architecture, and describes site surveying, excavation, construction management roles of civil engineers. It concludes that multi-storey buildings make efficient use of land but require safe design considering risks like earthquakes.
building consturction training report at cpwd (MNIT)rahul jangid
This document provides a practical training report on the construction site of a girls' hostel at MNIT Jaipur, India. It discusses the various construction processes used at the site, including laying the foundation with isolated and combined footings, formwork, reinforcement placement, slab casting, finishing work, and quality control measures. The document includes photos from the construction site and discusses the technologies used, such as total stations, batching plants, and tower cranes. The daily work reports provide details on the trainee's activities over two weeks, including learning reinforcement distribution, slab casting, and finishing work.
The document is a report on an industrial training project at a hospital construction site in Chennai by URC Constructions Private Limited. It provides details of the project such as constructing a basement parking facility, 8 floors and other areas on a site located in Perungudi, Chennai. It describes the soil conditions, foundation design, construction stages, safety measures, and estimates for the project. The traineeship provided hands-on experience in construction practices, challenges, and learning.
David Minja completed an 8-week industrial training report with Bade Contractors (T) LTD. The report summarized activities in each week, including concrete casting, foundation work, block laying, steel fixation, and septic tank construction. It concluded that the training provided valuable practical experience in construction tasks and helped bridge the gap between classroom theory and real-world work. Some challenges encountered on site were also noted.
Project on construction of 3 block house reportHagi Sahib
The document is a project report submitted by Blessings Builders (Pvt.) Limited for the construction of three hostel blocks at UET Peshawar Jalozai Campus. It includes an acknowledgement, executive summary, table of contents, and details of the project charter, requirements collection and scope definition, payment schedule, bill of quantities, and project plan. The project plan outlines the various construction activities that will be undertaken to complete the project within the approved budget of 30 million Pakistani rupees and timeframe of 788 calendar days.
IBS - Individual Assignment (Time comparison between IBS & traditional constr...Haziq1511
This document compares the time and speed of construction between cast-in-situ and industrialized building system (IBS) methods. It finds that IBS is typically faster, especially during the building erection phase, as prefabricated components can be assembled more quickly on site than pouring and curing concrete. However, both methods have similar timelines for design, planning and site preparation. The document also notes some potential delays for IBS, such as weather issues during erection or difficulties adapting to late design changes. Overall, IBS is concluded to be faster, but cast-in-situ may be preferable for certain building designs.
Major projects aluminium of formwork civil engineeringGopal jakhar
The document is a project report on aluminium formwork submitted by Gopal Jakhar to his professor Ambesh Ratnu. It discusses the necessity of aluminium formwork systems for mass housing construction in India, where it can maintain quality and speed at a high level. Key features include its reuseability, lightweight panels that require minimal equipment, and ability to form load-bearing walls and other building components faster than traditional construction methods.
- The document summarizes an internship report for a construction project of a regional office building for the Employers State Insurance Corporation.
- Key details include the project involved construction of a G+6 building over 11852 sqm of land at an estimated cost of 70.99 crore rupees, though it was delayed by 4 years.
- During the internship, the student gained experience in site execution, documentation, reconciliation, and contracts by coordinating painting, plastering, and tiling work and managing labor.
The document discusses the planning and roles of architecture and civil engineering in multi-storey building construction. It outlines that architects plan and design buildings while considering aesthetics, functionality, and safety. Civil engineers ensure infrastructure is designed, constructed, and maintained safely, functionally and economically. The document also provides examples of software used in architecture, and describes site surveying, excavation, construction management roles of civil engineers. It concludes that multi-storey buildings make efficient use of land but require safe design considering risks like earthquakes.
building consturction training report at cpwd (MNIT)rahul jangid
This document provides a practical training report on the construction site of a girls' hostel at MNIT Jaipur, India. It discusses the various construction processes used at the site, including laying the foundation with isolated and combined footings, formwork, reinforcement placement, slab casting, finishing work, and quality control measures. The document includes photos from the construction site and discusses the technologies used, such as total stations, batching plants, and tower cranes. The daily work reports provide details on the trainee's activities over two weeks, including learning reinforcement distribution, slab casting, and finishing work.
civil enginnering industrial training report KRISHNA MURARI
This document provides a report on Krishna Murari Kandu's industrial training at the Vinod Nagar Station Yard project of Delhi Metro Rail Corporation Ltd. It discusses the construction of the double deck stabling yard including piling, pile caps, piers and the boundary wall. It also describes the bar bending schedule process and various tests performed at the site and in the lab, including tests on bentonite, slump tests, and concrete cube tests. The training helped provide an overview of the construction process and quality control measures for a metro rail project.
The document discusses a training report submitted by A Bala Murali for the construction of a residential building as part of a degree program. It includes certificates from the university and company verifying the completion of the training. The report covers various aspects of the construction including a rainwater harvesting system using recharge trenches, construction of water storage tanks, slabs, and columns.
This document describes the design of a residential building located in S.V.Nagar, Puliyangudi. The 438.9 sqm building will be a G+1 framed structure. Structural elements like slabs, beams, columns were analyzed using STAAD Pro software and designed using the limit state method outlined in IS 456:2000. The building will include facilities like a portico, dining hall, drawing hall, kitchen, bedrooms, a study room, guest room, balcony, and staircase. Dimensional details of the structural elements are provided. Design of the slabs, beams, columns, footing, and staircase are discussed. The planning and design of the residential building was completed effectively using the limit state
Presentation. jkr lawatan IBS kilang HC Precast SystemTeow Beng Hur
IMPORTANT :
- Elements Required To Complete A Building
- Industrialised Building System ( IBS )
" is a system not a machine or component "
- Open System And Proprietary System Is A Technology
- Speed, Quality & Environment
- SEQUENCE OF WORK : 5 Steps & No Variation Order
- Step 1 : Drawing Conversion ( 2D to 3D )
- Step 2 : Mould Fabrication
- Step 3 : Production ( Decide by Client )
- Step 4 : Delivery ( Decide by Client )
- Step 5 : Installation Numbering ( Decide by Client )
1. The document summarizes a site visit by quantity surveying students to Andes Construction site.
2. At the site, students observed ongoing construction works like piling, formwork and reinforced concrete works. They learned about different construction materials, technologies and equipment used.
3. Key aspects observed included pile foundations, bored piling technique, timber formworks, and different grades of reinforced concrete used for columns, beams, slabs and foundations.
This document summarizes a student's site visit report for a construction technology course. The student visited a construction site for Taman Impian Murni housing development. During the visit, the student learned about:
- Safety procedures and importance of safety on construction sites.
- Construction materials and methods used, including concrete framing, reinforced concrete, types of bricks, and formwork.
- The construction process, from site layout and reinforcement to pouring concrete.
- Technical aspects like concrete grade, slab types, and lintels.
The student found the visit informative and a valuable hands-on learning experience compared to classroom lessons. It highlighted the importance of safety, teamwork, and proper planning in construction.
Industrial Training On Construction At Simplex Infrastructures LtdSk Md Nayar
This document provides an overview of an industrial training on construction conducted at Simplex Infrastructures Ltd. It acknowledges those involved in organizing the training. Simplex Infrastructures Ltd is introduced as a leading construction company in India and abroad since 1924. The trainees were involved in a housing project called Elita Garden Vista being constructed by Simplex. The training covered various aspects of construction planning, material management, formwork, surveying, quality control, plant and machinery used, and site execution process. The trainees concluded it was a valuable learning experience beyond their academic curriculum.
This document is a research proposal submitted by Than Lek Mei to compare the cost of buildings constructed using the conventional construction method versus the Industrialized Building System (IBS) in Malaysia. The proposal includes an introduction that provides background on IBS implementation in Malaysia, a problem statement on the low adoption of IBS despite its benefits, and a literature review on previous similar studies that have shown conflicting results. The research aims and objectives are defined as determining the most common IBS systems used in Malaysia, identifying factors affecting the costs of both methods, and comparing costs between methods for residential buildings. The proposed research design involves document analysis, questionnaires, interviews, and case studies.
The document provides details on the construction execution plan for the Kota Kasablanka 3 project, including:
1) The site plan shows the layout of the construction site including contractor offices, stockyards, batching plant, and labour camps.
2) The construction method uses a zoning system to divide the substructure and superstructure work into priority areas for each tower.
3) A schedule outlines the sequencing of activities in each zone, such as excavation, foundation work, and slab and column construction for the different levels.
The document is a site visit report from a student studying quantity surveying. It summarizes their visit to an apartment construction site. The report describes the pile foundation system used, with precast concrete piles driven into the ground. It then explains the process of constructing pile caps and column stumps, including formwork, reinforcement, and pouring concrete. Key materials used are also identified as reinforcement bar, reinforced concrete, and timber formwork. Photos from the site supplement the technical descriptions.
Larsen & Toubro (L&T) is conducting a training visit at their Jipmer Phase II construction project site from June 1-29, 2012. L&T is India's largest construction company, known for buildings, factories, airports and other major infrastructure. The Jipmer Phase II project involves construction of new buildings and facilities at the Jawaharlal Institute of Postgraduate Medical Education & Research (JIPMER) campus in Puducherry, India. The project covers over 50,000 square meters and has a contract value of 359 crores (3.59 billion rupees). The training covers important aspects of the project such as safety protocols, quality control procedures, formwork, finishing works
The document provides a site visit report for a construction site building two apartment blocks and three floor villas. Key details include:
- The site visit objective was to understand construction sequencing, working environment, technologies, and safety practices.
- Excavation was underway for Zone B, while Zone A excavation was complete. Bored piling using BG 14 and Sunwad machines was the pile foundation method.
- Reinforced concrete grades of 35 and 45 were used for different elements. Safety measures like a small temple and scaffolding were in place.
- The report concluded the visit provided valuable hands-on learning and an appreciation of construction teams' hard work under various conditions.
This document provides a summary of the internship of Mohammad Kazim Sultani at Vaichal Construction Pvt. Ltd. from December 15, 2014 to March 15, 2015. It describes the Chakan construction site project including filling procedures, building dimensions, materials used, and finishing work. It also provides details on various construction machines used at the site such as hydraulic pumping machines, vibration machines, fly ash brick machines, and concrete mixers. Concrete cube testing was performed to determine the compressive strength of mixes.
Construction Technology III (Group Assignment) - Semester 3 Yee Len Wan
This document discusses four types of formwork systems used in industrialized building systems (IBS): tunnel formwork system, hydraulic self-climbing formwork system, PERI 'Skydeck' formwork system, and glass-fiber reinforced plastic (GFRP) formwork. It provides details on a case study of The Paramount at Buckhead in Atlanta, which used a tunnel formwork system to construct a 44-story residential building. The key benefits and drawbacks of each formwork system are outlined.
Midhun Mohan is a senior project engineer located in Zambia, Africa with over 7 years experience managing mechanical construction projects. He has extensive experience executing projects from planning through completion, including managing teams, budgets, schedules, and subcontractors. Some of the major projects he has worked on involve piping installations, structural work, and equipment installation for industrial plants in Zambia such as wood processing facilities and copper mines. He holds a Bachelor's degree in Mechanical Engineering from India and is seeking new project engineering opportunities.
This construction site visit report summarizes a visit by students to the D'Latour construction site in Bandar Sunway, Selangor, Malaysia. The report describes the objectives of the visit which were to experience the construction site environment, understand safety procedures, visualize building materials and processes, and gain knowledge of machinery uses. Key observations from the site include the building foundations consisting of micropiles, use of post-tensioning and scaffolding, storage of materials, and different formwork types including timber, table, and steel forms. Photos document various construction elements, equipment, and the group visiting the site.
This site visit report summarizes a visit by students to an ongoing semi-detached house construction project. The report describes the objectives of the visit which were to understand construction processes, materials, and safety practices. It then provides details on the construction of pad footings including the excavation process, formwork installation, reinforcement bar placement, and concrete pouring. Photos from the site illustrate various stages of pad footing and structural frame construction. The report concludes that the site visit helped provide practical knowledge and preparation for future construction-related career roles.
Jamil Moh'd Alzaghari is a Jordanian civil engineer with over 30 years of experience in structural engineering. He received a B.S. in Civil Engineering from the University of Jordan. His areas of expertise include design of reinforced concrete, steel, and post-tensioned structures including buildings, bridges and retaining walls. He is proficient in various structural design software such as ETABS, SAP, STAAD and has worked on numerous projects in Jordan, Libya, Saudi Arabia. Currently he works as a bridge engineer for ZFP in Dammam, KSA.
Multistorey residential building construction training reportBeing Deepak
This document provides details about a practical training report submitted for a Bachelor's degree in Civil Engineering. It describes a multi-storey residential building project consisting of a ground plus twelve floors with 93 flats. The report covers various aspects of the building construction including sub-structure, super-structure, materials, testing, equipment, brick masonry, plaster and building by-laws.
Quick impressions from the land of fjords v1.3Lukas Jasiūnas
The document summarizes the author's short motorcycling tour through Norway, highlighting some of the scenic routes and landscapes encountered. It describes the Lysebotn road as one of the most scenic in Europe, with 27 hairpin turns and a 1.1 km tunnel. The author emphasizes Norway's pristine natural beauty, with mountains, waterfalls, and forests visible right outside cities. Camping is a popular way for motorcyclists to enjoy Norway's nature. Despite expensive fuel and accommodation, the author recommends visiting Norway for anyone with the chance, saying they were utterly fulfilled by their short tour.
Daniel Erb is an experienced manufacturing and operations manager seeking new opportunities. He has over 20 years of experience managing manufacturing facilities and teams of up to 226 employees. Erb is skilled in process improvement methodologies like Six Sigma and Lean Manufacturing and has increased productivity at previous employers by 30-50% through streamlining processes and effective management. He prides himself on exceeding customer expectations while maintaining high production efficiency.
civil enginnering industrial training report KRISHNA MURARI
This document provides a report on Krishna Murari Kandu's industrial training at the Vinod Nagar Station Yard project of Delhi Metro Rail Corporation Ltd. It discusses the construction of the double deck stabling yard including piling, pile caps, piers and the boundary wall. It also describes the bar bending schedule process and various tests performed at the site and in the lab, including tests on bentonite, slump tests, and concrete cube tests. The training helped provide an overview of the construction process and quality control measures for a metro rail project.
The document discusses a training report submitted by A Bala Murali for the construction of a residential building as part of a degree program. It includes certificates from the university and company verifying the completion of the training. The report covers various aspects of the construction including a rainwater harvesting system using recharge trenches, construction of water storage tanks, slabs, and columns.
This document describes the design of a residential building located in S.V.Nagar, Puliyangudi. The 438.9 sqm building will be a G+1 framed structure. Structural elements like slabs, beams, columns were analyzed using STAAD Pro software and designed using the limit state method outlined in IS 456:2000. The building will include facilities like a portico, dining hall, drawing hall, kitchen, bedrooms, a study room, guest room, balcony, and staircase. Dimensional details of the structural elements are provided. Design of the slabs, beams, columns, footing, and staircase are discussed. The planning and design of the residential building was completed effectively using the limit state
Presentation. jkr lawatan IBS kilang HC Precast SystemTeow Beng Hur
IMPORTANT :
- Elements Required To Complete A Building
- Industrialised Building System ( IBS )
" is a system not a machine or component "
- Open System And Proprietary System Is A Technology
- Speed, Quality & Environment
- SEQUENCE OF WORK : 5 Steps & No Variation Order
- Step 1 : Drawing Conversion ( 2D to 3D )
- Step 2 : Mould Fabrication
- Step 3 : Production ( Decide by Client )
- Step 4 : Delivery ( Decide by Client )
- Step 5 : Installation Numbering ( Decide by Client )
1. The document summarizes a site visit by quantity surveying students to Andes Construction site.
2. At the site, students observed ongoing construction works like piling, formwork and reinforced concrete works. They learned about different construction materials, technologies and equipment used.
3. Key aspects observed included pile foundations, bored piling technique, timber formworks, and different grades of reinforced concrete used for columns, beams, slabs and foundations.
This document summarizes a student's site visit report for a construction technology course. The student visited a construction site for Taman Impian Murni housing development. During the visit, the student learned about:
- Safety procedures and importance of safety on construction sites.
- Construction materials and methods used, including concrete framing, reinforced concrete, types of bricks, and formwork.
- The construction process, from site layout and reinforcement to pouring concrete.
- Technical aspects like concrete grade, slab types, and lintels.
The student found the visit informative and a valuable hands-on learning experience compared to classroom lessons. It highlighted the importance of safety, teamwork, and proper planning in construction.
Industrial Training On Construction At Simplex Infrastructures LtdSk Md Nayar
This document provides an overview of an industrial training on construction conducted at Simplex Infrastructures Ltd. It acknowledges those involved in organizing the training. Simplex Infrastructures Ltd is introduced as a leading construction company in India and abroad since 1924. The trainees were involved in a housing project called Elita Garden Vista being constructed by Simplex. The training covered various aspects of construction planning, material management, formwork, surveying, quality control, plant and machinery used, and site execution process. The trainees concluded it was a valuable learning experience beyond their academic curriculum.
This document is a research proposal submitted by Than Lek Mei to compare the cost of buildings constructed using the conventional construction method versus the Industrialized Building System (IBS) in Malaysia. The proposal includes an introduction that provides background on IBS implementation in Malaysia, a problem statement on the low adoption of IBS despite its benefits, and a literature review on previous similar studies that have shown conflicting results. The research aims and objectives are defined as determining the most common IBS systems used in Malaysia, identifying factors affecting the costs of both methods, and comparing costs between methods for residential buildings. The proposed research design involves document analysis, questionnaires, interviews, and case studies.
The document provides details on the construction execution plan for the Kota Kasablanka 3 project, including:
1) The site plan shows the layout of the construction site including contractor offices, stockyards, batching plant, and labour camps.
2) The construction method uses a zoning system to divide the substructure and superstructure work into priority areas for each tower.
3) A schedule outlines the sequencing of activities in each zone, such as excavation, foundation work, and slab and column construction for the different levels.
The document is a site visit report from a student studying quantity surveying. It summarizes their visit to an apartment construction site. The report describes the pile foundation system used, with precast concrete piles driven into the ground. It then explains the process of constructing pile caps and column stumps, including formwork, reinforcement, and pouring concrete. Key materials used are also identified as reinforcement bar, reinforced concrete, and timber formwork. Photos from the site supplement the technical descriptions.
Larsen & Toubro (L&T) is conducting a training visit at their Jipmer Phase II construction project site from June 1-29, 2012. L&T is India's largest construction company, known for buildings, factories, airports and other major infrastructure. The Jipmer Phase II project involves construction of new buildings and facilities at the Jawaharlal Institute of Postgraduate Medical Education & Research (JIPMER) campus in Puducherry, India. The project covers over 50,000 square meters and has a contract value of 359 crores (3.59 billion rupees). The training covers important aspects of the project such as safety protocols, quality control procedures, formwork, finishing works
The document provides a site visit report for a construction site building two apartment blocks and three floor villas. Key details include:
- The site visit objective was to understand construction sequencing, working environment, technologies, and safety practices.
- Excavation was underway for Zone B, while Zone A excavation was complete. Bored piling using BG 14 and Sunwad machines was the pile foundation method.
- Reinforced concrete grades of 35 and 45 were used for different elements. Safety measures like a small temple and scaffolding were in place.
- The report concluded the visit provided valuable hands-on learning and an appreciation of construction teams' hard work under various conditions.
This document provides a summary of the internship of Mohammad Kazim Sultani at Vaichal Construction Pvt. Ltd. from December 15, 2014 to March 15, 2015. It describes the Chakan construction site project including filling procedures, building dimensions, materials used, and finishing work. It also provides details on various construction machines used at the site such as hydraulic pumping machines, vibration machines, fly ash brick machines, and concrete mixers. Concrete cube testing was performed to determine the compressive strength of mixes.
Construction Technology III (Group Assignment) - Semester 3 Yee Len Wan
This document discusses four types of formwork systems used in industrialized building systems (IBS): tunnel formwork system, hydraulic self-climbing formwork system, PERI 'Skydeck' formwork system, and glass-fiber reinforced plastic (GFRP) formwork. It provides details on a case study of The Paramount at Buckhead in Atlanta, which used a tunnel formwork system to construct a 44-story residential building. The key benefits and drawbacks of each formwork system are outlined.
Midhun Mohan is a senior project engineer located in Zambia, Africa with over 7 years experience managing mechanical construction projects. He has extensive experience executing projects from planning through completion, including managing teams, budgets, schedules, and subcontractors. Some of the major projects he has worked on involve piping installations, structural work, and equipment installation for industrial plants in Zambia such as wood processing facilities and copper mines. He holds a Bachelor's degree in Mechanical Engineering from India and is seeking new project engineering opportunities.
This construction site visit report summarizes a visit by students to the D'Latour construction site in Bandar Sunway, Selangor, Malaysia. The report describes the objectives of the visit which were to experience the construction site environment, understand safety procedures, visualize building materials and processes, and gain knowledge of machinery uses. Key observations from the site include the building foundations consisting of micropiles, use of post-tensioning and scaffolding, storage of materials, and different formwork types including timber, table, and steel forms. Photos document various construction elements, equipment, and the group visiting the site.
This site visit report summarizes a visit by students to an ongoing semi-detached house construction project. The report describes the objectives of the visit which were to understand construction processes, materials, and safety practices. It then provides details on the construction of pad footings including the excavation process, formwork installation, reinforcement bar placement, and concrete pouring. Photos from the site illustrate various stages of pad footing and structural frame construction. The report concludes that the site visit helped provide practical knowledge and preparation for future construction-related career roles.
Jamil Moh'd Alzaghari is a Jordanian civil engineer with over 30 years of experience in structural engineering. He received a B.S. in Civil Engineering from the University of Jordan. His areas of expertise include design of reinforced concrete, steel, and post-tensioned structures including buildings, bridges and retaining walls. He is proficient in various structural design software such as ETABS, SAP, STAAD and has worked on numerous projects in Jordan, Libya, Saudi Arabia. Currently he works as a bridge engineer for ZFP in Dammam, KSA.
Multistorey residential building construction training reportBeing Deepak
This document provides details about a practical training report submitted for a Bachelor's degree in Civil Engineering. It describes a multi-storey residential building project consisting of a ground plus twelve floors with 93 flats. The report covers various aspects of the building construction including sub-structure, super-structure, materials, testing, equipment, brick masonry, plaster and building by-laws.
Quick impressions from the land of fjords v1.3Lukas Jasiūnas
The document summarizes the author's short motorcycling tour through Norway, highlighting some of the scenic routes and landscapes encountered. It describes the Lysebotn road as one of the most scenic in Europe, with 27 hairpin turns and a 1.1 km tunnel. The author emphasizes Norway's pristine natural beauty, with mountains, waterfalls, and forests visible right outside cities. Camping is a popular way for motorcyclists to enjoy Norway's nature. Despite expensive fuel and accommodation, the author recommends visiting Norway for anyone with the chance, saying they were utterly fulfilled by their short tour.
Daniel Erb is an experienced manufacturing and operations manager seeking new opportunities. He has over 20 years of experience managing manufacturing facilities and teams of up to 226 employees. Erb is skilled in process improvement methodologies like Six Sigma and Lean Manufacturing and has increased productivity at previous employers by 30-50% through streamlining processes and effective management. He prides himself on exceeding customer expectations while maintaining high production efficiency.
This document provides a summary and review of four motorcycle-themed movies: "On Any Sunday", "TT3D", "Motorcycle Diaries", and "The World's Fastest Indian". Each movie is summarized in 1-2 sentences highlighting the main themes or stories depicted. The reviews encourage viewers to watch the inspiring true stories and insights into different motorcycle cultures and passions for riding.
1000Fryd is a volunteer-run cultural center located in Aalborg, Denmark that has promoted veganism and counterculture since the 1980s. It hosts weekly concerts featuring various music genres as well as movie nights, art shows, and a popular vegan soup kitchen. While 1000Fryd began as a communal space, it now successfully operates a cafe, bar, recording studio, and event spaces. Veganism became more prominent in the 1990s punk scene and 1000Fryd continues to advocate for animal rights and environmentalism through its exclusively plant-based food offerings and educational events.
Small displacement motorcycles have several advantages over larger bikes according to the author. They are easier for new riders to learn on due to being more maneuverable and having a lower risk of injury. They are also more affordable both initially and to maintain, have very good fuel efficiency, and allow riders to focus more on riding skills rather than just speed. While some riders argue small bikes are too slow, the author believes they provide a more engaging experience by requiring the rider to master control and bring the bike to its full performance potential on a daily basis.
Accidents and injuries - the salt of riding pt2 v1.1Lukas Jasiūnas
Head injuries are the leading cause of fatalities and permanent disability in motorcycle accidents. Wearing a certified helmet can reduce deaths by 29-35%. Symptoms of a concussion like numbness, nausea and headaches mean seeing a doctor. While cervical spine injuries are rare in survivors, risks of airway obstruction mean promptly removing a tight full-face helmet if the rider is conscious, or stabilizing the spine if unconscious. Common fractures from crashes involve legs pinned under bikes, arms breaking falls, and shoulders or pelvises. Riders should get off the road immediately after a crash and call for help if injured.
The document appears to be a timeline of important events in a couple's relationship, beginning with them starting to date on November 25, 2010 and including their first dance, falling in love, engagement in May 2012, and the birth of their second baby in June 2015.
This document outlines ingredients for success in the catering business. It provides tips such as exceeding customer expectations, creating strategic growth plans, building trust with customers, accurately forecasting costs and market trends, developing detailed event plans, training staff to work as a cohesive team, and implementing proper controls and accounting systems. Following these ingredients will help caterers build a positive reputation, satisfy customers, and experience long term business growth and financial success.
www.partacademy.ir دوره آموزش برنامه نویسی اندروید موسسه پارت مشهدPartAcademy
این دوره در موسسه آموزش عالی آزاد پارت برگزار میگردد.
دانشپذیران پس از اتمام هر کدام از دوره ها گواهینامه معتبر از وزارت علوم، تحقیقات و فناوری دریافت خواهند کرد.
Well Log Interpretation and Petrophysical Analisis in [Autosaved]Ridho Nanda Pratama
PT. Halliburton Logging Service is a branch of Halliburton that provides completion and production services, drilling, and reservoir evaluation to oil companies in Sumatra, Indonesia. Dery Marsan and Ridho Nanda Pratama completed an on-job training program at Halliburton from August to September 2015. Their project involved well log analysis to determine water saturation and the most suitable water resistivity parameters in two formations, with the objectives of identifying water zones, evaluating challenges around determining petrophysical parameters, and analyzing well data. Their analysis identified both water-bearing and possible oil-bearing zones through evaluation of gamma ray, resistivity, neutron-density crossplots, and other well logs.
Atul Shrivastava is seeking a structural engineering or project management position. He has over 1.5 years of experience as a junior structural design engineer, lead structural design engineer, and lead technical coordinator. He is proficient in structural design software like ETABS, SAFE, Sap2000, and Prokon. Some of his project experiences include being the lead structural design engineer for a 35-story residential tower project and a 7-podium, 35-floor project. He is skilled in all aspects of civil engineering including design, project management, coordination, and using national structural design standards.
The document provides details of the internship project involving analysis and design of a school building structural system. It includes modeling the building in ETABS, defining loads, material properties and sections, running analysis to obtain results like bending moments, and designing structural elements like beams and columns based on the code provisions. The intern gained practical experience in structural planning, modeling, analysis, design, and gained knowledge on applying concepts learned in class to real-life projects.
Destech Structural Consultants provides structural engineering consulting services including design, analysis, proof checking, and sustainability solutions. They have expertise in designing various structures like high-rise buildings, industrial buildings, commercial complexes, and steel structures. The company is managed by Bhauso Desai, the founder, along with Jitendra Naregalkar and advisor Abhay Bambole. They have experience working on projects across India as well as internationally in Dubai and Oman.
PROPOSED 4BEDROOM DUPLEX & A ONE BEDROOM SEMI-DETACHED RESIDENTIAL DEVELOMENT...DougDos
The document proposes the development of a 4 bedroom residential apartment building. It includes details of the project such as the location, description of the proposed building which will be 2 floors with 4 bedrooms and 1 bedroom, and the structure which will be reinforced concrete. It describes the wall, slab, roofing, plastering, flooring, painting, windows, doors and other aspects of the building. It discusses the material testing, cost which is estimated at 62 million naira, duration of 4 months, construction methodology, quality control, safety measures, and buildability and maintainability analysis. Floor plans, elevations, and foundation layout are also included.
REPORT ON G+4 RCC HOSTEL BUILDING ANALYSIS AND DESIGN USING STAAD PRO SOFTWARERakeshDas161
REPORT ON G+4 RCC HOSTEL BUILDING IN ( SEISMIC ZONE 5 ) ANALYSIS AND DESIGN USING STAAD PRO SOFTWARE
PREPARED BY RAKESH DAS AND HIS GROUP
DEPARTMENT OF CIVIL ENGINEERING
GIRIJANANDA CHOWDHURY INSTITUTE OF MANAGEMENT AND TECHNOLOGY GUWAHATI ASSAM
This document is a curriculum vitae for Raveendra Babu Cherukuru, a civil structural engineer. It summarizes his contact information, education qualifications including a master's degree in structural engineering and bachelor's degree in civil engineering. It also outlines his 10 years of experience in structural engineering projects for organizations like PL Engineering and Videocon Group. His technical skills include design of RCC and steel structures using software like STAAD Pro and ETABS. Key projects included design of structures for a polysilicon production plant in Qatar and an oil storage tank project in Kuwait.
The document summarizes the analysis and design of a G+3 shopping complex. It includes the design of structural elements like slab, beams, columns, staircase and foundation. It describes the design methodology, software used for analysis (STAAD.Pro), and design of key structural components like the ground floor slab. The students have submitted this project to fulfill the requirements for their Bachelor of Technology degree in Civil Engineering.
This document summarizes the planning, analysis, and design of a residential apartment building project by three civil engineering students. It includes the building plans, structural drawings, analysis using STAAD Pro software, and manual design of structural elements like slabs, beams, columns, and footings. The building has four floors including a ground floor and is designed as per IS and NBC codes using M20 grade concrete and Fe415 grade steel.
This document presents the analysis and design of a multi-storey school building using ETABS software. It includes modeling the building, applying loads like dead, live, wind and snow loads, analyzing the structure, designing building elements like beams, columns, slabs and footings, and detailing the design. The methodology follows Indian code specifications. The current status is designing plans manually and on AutoCAD. Future plans include completing analysis and design in ETABS to ensure structural safety under all loading conditions.
Clients recognising DDS as their first choice when deciding on civil & structural engineering solutions. Employees knowing that DDS is the preferred employer in the consulting engineering fraternity. Associates & business partners recognising DDS as a valued partner in delivering world-class engineering solutions.
PLANNING AND DESIGN OF G+3 RESIDENTIAL HOUSING COMPLEX (Share By Suman Sau)Suman Sau
The document outlines the planning and design of a G+3 residential housing complex project. It discusses the objectives of designing a 17 unit apartment building with 3 stories using RCC framing. It describes the key elements of the complex like residential buildings, roads, school, and amenities. It also discusses the software used like AutoCAD and STAAD Pro, the methodology of selecting the site, creating master plans and designs, and analyzing the structure. Load cases, design of beams, columns, and slabs are also summarized.
This document summarizes the roles and responsibilities of structural engineers. It discusses their work in three phases: pre-construction, construction, and post-construction. In the pre-construction phase, structural engineers analyze building plans, design structural components, and produce tender and construction drawings. During construction, they ensure structural elements are properly installed and conduct tests. In the post-construction phase, engineers perform final load tests to ensure the building's safety. The document also provides examples of structural drawings and software used.
This document summarizes the roles and responsibilities of structural engineers. It discusses their work in three phases: pre-construction, construction, and post-construction. In the pre-construction phase, structural engineers analyze building plans, design structural components, and produce tender and construction drawings. During construction, they inspect materials and ensure structures are built correctly. In the post-construction phase, engineers conduct final load tests to ensure the building's safety. The document also provides examples of structural drawings and software used.
Seismic analysis of multi storey reinforced concrete buildings frame”ankialok
The opinion that designing new buildings to be Earthquake resistant will cause substantial additional costs is still among the constructional professionals. In a country of moderate seismicity adequate seismic resistance of new buildings may be achieved at no or no significant additional cost however the expenditure needed to ensure adequate seismic resistance may depend strongly on the approach selected during the conceptual design phase and the relevant design method. Regarding the conceptual design phase early collaboration between the architect and civil engineering is crucial.
Seismic analysis of multi storey reinforced concrete buildings frame”ankialok
The opinion that designing new buildings to be Earthquake resistant will cause substantial additional costs is still among the constructional professionals. In a country of moderate seismicity adequate seismic resistance of new buildings may be achieved at no or no significant additional cost however the expenditure needed to ensure adequate seismic resistance may depend strongly on the approach selected during the conceptual design phase and the relevant design method.
This document is a curriculum vitae for Mohamed Nabil Mohamed Omer, a structural engineer. It lists his professional affiliations and contact information, followed by summaries of his skills, experience, duties and responsibilities, and work history. He has over 15 years of experience in structural design of concrete and steel structures for buildings, infrastructure projects, and marine structures. His experience includes structural analysis, design, project management, and technical coordination roles.
Nitin Pant is a civil engineer with over 10 years of experience in construction projects. He has worked on various types of projects including real estate, infrastructure, and industrial. Currently, he works as a project engineer for Mace Group where he oversees the construction of high-rise towers, basements, and other project elements. Previously, he has worked on metro rail and aluminum smelting plant construction projects. Pant is proficient in project management, cost control, foundation work, and coordinating civil and mechanical works. He holds a Bachelor's degree in Civil Engineering and additional certifications in structural analysis and design software.
Micheal Samir is a civil engineer with over 9 years of experience in construction supervision, estimation, procurement, and project management. He holds a Bachelor's Degree in Civil Engineering and has worked on numerous projects in Abu Dhabi and Dubai involving villas, buildings, and infrastructure as a project engineer and civil site engineer. His roles have included managing resources, monitoring progress, and coordinating subcontractors. He is proficient in Microsoft Excel, Primavera, AutoCAD, and Revit.
This document is a resume for Amod Kumar, a civil engineer seeking a new position. He has over 1 year and 8 months of experience in site supervision of structural and finishing work for multi-story buildings. His most recent role was as a civil engineer for Larsen & Toubro ECC Division from July 2014 to March 2016. He is proficient in civil engineering skills like site supervision, bar bending schedules, and aluminum shuttering systems. He is looking to take on increasing responsibility and challenging assignments.
1. To:
Dear Sir,
Sub: Application for the post of Structural Engineer
Currently I am working for GMSC in Bangalore, India as a structural Engineer -
since April 2014. I am interested in joining a company where my analytical and
design skills could be put to use, and I believe that I possess the skills and
experience necessary to succeed in this role. I have always enjoyed working with
people and think my previous experience will allow me to work as part of the
team and to be an effective representative of your company.
My current position responsibilities are analyzing and designing the buildings and
designs are handover to the draftsmen to represent my work in AutoCAD so that
it easily readable by site engineer at the time of execution. The tools which are
used for the designs are ETABS, STAAD PRO, and SAFE few analysis and designs
can be done manually according to several IS codes.
I am interested to join your organization to sharpen my skills and to next level of
experience. My strengths include being able to work well with team, to converse
with anyone, and to enter easily into new situations with a creative and
resourceful attitude. I am very detail oriented, sincere and punctual.
I am confident and assure you that I shall discharge my responsibilities and
contribute substantially to the growth of the organization and reputation. I feel
that i would be able to make a significant contribution to your organization.
I have attached my resume, which outlines my credentials and experience in
detail.
Thanking you,
Warm Regards,
Mohammed Adnan Ahmed
Kumarswamy Layout
Cell: +91 - 8495041368
Email: adnan123ahmed@gmail.com
Bangalore, India.
2. Mohammed Adnan Ahmed
Cell: +91 - 8495041368
Email: adnan123ahmed@gmail.com
Bangalore, India.
CAREER OBJECTIVE
Seeking a responsible job with an opportunity for professional challenges to excel in the field of
engineering industry where engineering, construction, project management skills are effectively
utilized related to utility buildings, commercial, institutional projects and updating skills continuously,
put to optimal use and achieve excellence as a successful professional.
SUMMARY
I am Structural Engineer with 2 year of experience in Design of RCC (REINFORCED
CONCRETE) which includes design of Commercial and Residential buildings. Analysis and design is
carried out by using software like ETABS and STAAD PRO, for designing the foundation and flat slab
SAFE has used. In high rise buildings shear wall is used to resist the lateral loads effectively,
foundations for the high rise is raft completely or else pile. All the designs are carried out by IS 456
2000, for the building located in earthquake prone there region including IS 456, IS1893 are also used
to make earthquake resistance.
EDUCATION
Visveswarya Technological University (Belgaum, India). Aug 2008 – Sep 2012
Bachelor of Engineering in CIVIL Engineering.
Visveswarya Technological University (Belgaum, India). Aug 2012 – July 2014
Masters in STRUCTURAL in Engineering.
CERTIFICATIONS
• Completed certificate course in AutoCAD, STAD PRO and ETABS from EDU CAAD
CENTRE BANGLORE.
WORK EXPERIENCE
Date Worked at GDC consultants as a Structural Design Engineer, in Bangalore, India. APRIL
2014 – DEC2014
Working at GMS consultant as a Structural Design Engineer, in Bangalore, India.
DEC2014 – Till Date
Ongoing project: -1) Multi specialty 200 bed hospital
2) Tumkur Institute of Medical Science (Tumkur)
3) District court complex
Executed project: 1) Ayush hospital Bijapur 2) Food lab Mysore 3) Life style Mall
3. Ongoing project 1
Organization : GMSC STRUCTURAL CONSULTANT Banglore INDIA
Duration : JUNE 2015 to Till date
Position : STRUCTURAL ENGINEER
Project Title : Multi speciality 200 hospital
Client : KHSDRP
Consultant : KHSDRP office cheif architect Banglore INDIA
Main Contractor : BSR contructions
Project details : The Project scope involves complete structural design of building
Which includes design of all the structural elements (BEAM SLAB
COLOUMN FOOTING ETC) beams and colomns design by ETABS,
Footins are design by safe and slabs are design manually.
The designs are representd by structural draftmen in Auto CAD
SBC is 18 tons and all the toilet blocks are sunked by 450 mm
Location of water tank is above toilet block ,wall thickness is 230 mm
Partion wall load is considered on slab, the building is G+3 floor to
Floor height is 3.6m and pinth level is 1.5mt grade of the concrete
And steel is M25 Fe500. The buildings is design for DL+LL combination
And also design for earthquake Located in zone lll.the above designs
Are carried out by indian standard codes (IS 456, SP16, IS 875 and
IS 1893).
Ongoing project 2
Organization : GMSC STRUCTURAL CONSULTANT Banglore INDIA
Duration : SEP 2015 to Till date
Position : STRUCTURAL ENGINEER
Project Title Proposed Tumkur Institute of Medical Science, TumkuR
Client : PWD
Consultant : Principal cheif architect PWD Banglore INDIA
Main Contractor : BSR contructions
Project details The proposed project is Tumkur Institute of medical sciences at
Tumkur. The proposed building will comprise of RCC frames
consisting of partly Ground floor + 3 floors+ terrace + LMR, Staircase
and OHT for Blocks A, Stilt + Ground + 3 floors + terrace +LMR,
Staircase and OHT for Block B&C, Stilt + Ground + 4 floors + terrace
+LMR, Staircase and OHT for Block D, and Stilt + Ground + 2 floors +
terrace +LMR, Staircase and OHT for Block E.
The Project scope involves complete structural design of building
Which includes design of all the structural elements (BEAM SLAB
COLOUMN FOOTING ETC) beams and colomns design by ETABS,
Footins are design by safe and slabs are design manually.
all the toilet blocks are sunked by 450 mm The allowable bearing pressure
at the recommended depth of footings was found to be
Block A =200 Kn/Sq mt
Block B=200.00 KN / Sq mt.
Block C=200 kn/Sq mt
Block D=160 kn/Sq mt
Block E=160 kn/ Sq mt
wall thickness is 230 mm. The fundamental natural period (T) is is
determined by Ta=0.075h0.75
Part ion wall load is considered on slab, floor to Floor height is 3.6m
And steel is M25 Fe500. The buildings is design for DL+LL combination
And also design for earthquake Located in zone ll.the above designs
Are carried out by Indian standard codes (IS 456,SP34, SP16, IS 875,
IS 1893).
4. Ongoing project 3
Organization : GMSC STRUCTURAL CONSULTANT Banglore INDIA
Duration : DEC 2015 to Till date
Position : STRUCTURAL ENGINEER
Project Title : District Court Complex
Client : PWD
Consultant : GMSC architect banglore INDIA
Main Contractor : BSR contructions
Project details : The proposed building comprise of RCC frame G+5+lift machine+
Stair case head room+overhead water tank
The Project scope involves complete structural design of building
Which includes design of all the structural elements (BEAM SLAB
COLOUMN FOOTING ETC) beams and colomns design by ETABS,
Footins are design by safe and slabs are design manually.
The designs are representd by structural draftmen in Auto CAD
SBC is 15 tons and all the toilet blocks are sunked by 450 mm
wall thickness is 230 mm. The fundamental natural period (T) is
is determined by Ta=0.075h0.75
The designed wind speed is calculated from Vz=Vb*K1*K2*K3
Vb-Basic wind speed of Hassan is 33 m/s
K1-Probability factor (Risk Co-efficient) – 1.05
K2-Terrain, height and structure size factor
Terrain – 2, Structure Class - B
K3-topography factor
Partion wall load is considered on slab, floor to Floor height is 3.6m
And steel is M25 Fe500. The buildings is design for DL+LL combination
And also design for earthquake Located in zone ll.the above designs
Are carried out by indian standard codes (IS 456,SP34, SP16, IS 875,
IS 1893).
DUTIES & RESPONSIBILITIES:
• Versatile to understand the duties and responsibilities
• Responsible for designing all the structural elements of the buildings
• Duty is to give safe designs to the clients
• Duty is to read and understand the architectural drawing correctly
• Duty is to make efficient use of funds and materials in order to achieve structural goals.
• Working with geotechnical engineers to investigate ground conditions and analyze results of
soil sample and in situ tests
• When construction has begun, duty is too involved in inspecting the work and advising
contractors.
• To converse with anyone, and to enter easily into new situations with a creative and resourceful
attitude
• Responsible for the organization and delivery of materials and equipment for the needs of the
construction project. The supervision and management of on-site labor may also be a necessity.
• The role of a structural engineer involves a significant understanding of both static and
dynamic loading, and the structures that are available to resist them
• The main responsibility is to understand the interaction of structures with the shaking ground,
forces the consequences of possible earthquakes, and design and construct the structures
to perform during an earthquake.
5. • The structural design for a building must ensure that the building is able to stand up safely, able
to function without excessive deflections or movements which may cause fatigue of structural
elements, cracking or failure of fixtures, fittings or partitions, or discomfort for occupants.
• Duty is to describe wind loads for the design of buildings that respond elastically in strong
winds.
ACADEMIC PROJECT
PARTIAL REPLACEMENT OF CEMENT WITH FLY ASH (BE)
Organization : Guru Nanak Dev Engineering College
Duration : 3 Months
PROBABILISTIC SESMIC RISK ANALYSIS OF UNCONFINEDRC BUILDING
CONSIDERING UNCERTAINITIES (M tech)
ADDITIONAL SKILLS
• Good Knowledge in operating Mat lab.
• Good Knowledge in AutoCAD.
• Flexible and versatile to adapt to any new environment.
• Good Communication Skills, Interpersonal Relations, Hardworking and result oriented as an
individual and in a team.
• To converse with anyone, and to enter easily into new situations with a creative and resourceful
attitude
• Versatile to understand the duties and responsibilities
• To maximize profit by improving the operational efficiencies and enhance the utilization of the
resources.
PERSONAL DETAILS
Date of birth : 07 NOV 1990
Nationality : Indian.
Material Status : Single.
Organization : National Institute of Technology Surathkal (NITK)
Duration : 5 MONTHS (NOV 2013-MARCH 2014)
Overview : In the present study, three distinct analysis is carried out
namely, Equivalent Static Analysis, Response Spectrum Analysis
(RSA) and Non-linear Static Pushover Analysis is carried out for
various models with varying strength (concrete and steel) in
SAP2000 by Mander’s approach for unconfined concrete, the results
of pushover analysis in terms of base shear and displacement are
compared with the experimental four storey building located in
seismic zone IV.
6. Languages : English, Urdu, Hindi and Kannada.
Present Address : Bangalore, India.
Passport Number : 874438
Date of Issue : 03/07/2015
Date of Expiry : 02/07/2025
Notice period : 45days
NOTE: HRD IS ALREADY DONE FOR BE AND M tech DEGREE CERTIFICATES
I hereby declare that the above mentioned details are true to best of my knowledge.
MOHAMMED ADNAN AHMED