The Public Enemy By William Wellman

The Public Enemy By William Wellman
The Public Enemy by William Wellman (1931) is a renowned gangster film that paved the way for an emerging genre whilst maximizing the use of
sound technology of which the effects were still reverberating around Hollywood in the 1930's to amplify and exaggerate the narrative as well as other
elements such as mise–en–scene but also to assault audience with a new experience. The emergence of an all–talking gangster film that capitalized
upon and left a lasting impression on the audience and on society as it commented on social and economic issues that surrounded the American
people such as race and social status. However, at the time when The Public Enemy was released in 1931, Hollywood was beginning to feel the
effects of the Wall Street Crash, which meant that they began producing films that their audience wanted to see and that we're affordable which lead
to the rise of the gangster genre, which flourished for the next few years. Ruth Vasey's assessment of The Public Enemy is incredibly insightful into
how sound impacted the film and its audience but also how sound was used in correlation with the other elements of the film to create its visceral
impact on the audience. However with the introduction of sound, more obstacles we're discovered such as the issue of censorship as it had a
"perceived capacity to undermine middle–class vales".
The introduction of sound in the 1920's had a colossal impact on the Hollywood Studio System and left aftershocks throughout society for
... Get more on HelpWriting.net ...

Firewall Intrusion Detection And Honeypot Using Raspberry Pi
Firewall intrusion detection and Honeypot using Raspberry pi
Submitted in partial fulп¬Ѓllment of the requirements for the degree of Bachelor of Engineering in Computer Engineering
By
Dishant Modi
130170107046
3.2 Schedule Representation.............................................................16 3.2Risk Management........................................................................17
3.2.1Risk Identification...............................................................17
3.2.2 Risk analysis.......................................................................17
3.2.3 Risk planning......................................................................18
4.System Modeling
4.1.Dataflow diagrams...............................................................19
4.1.1.Context Level Diagram................................................19
4.1.2.Level – 1 DFD..............................................................19
4.1.3.Level – 2 DFD..............................................................20
4.2.Use case diagrams ...............................................................20
4.3.Activity Diagrams .................................................................21
4.4.Sequence diagrams ..............................................................22
4.5.Class Diagrams....................................................................23
4.6.System Architecture..............................................................24
5.Configure Raspberry pi......................................................................25
6.Testing.............................................................................................30
7.Conclusion.......................................................................................31
Bibliography and References..................................................................32
Ied. A widely accepted alternative or at least complement to host–based security services is the firewall. The firewall is inserted between the premises

network and the Internet to establish a controlled link and to erect an outer security wall or perimeter. The aim of this perimeter is to protect the
premises network from Internet–based attacks and to provide a single choke

Investigatory Project Homemade Bouncy Polymer
HOMEMADE BOUNCY POLYMER
An Entry for the 2009 DIVISION SCIENCE FAIR
TEAM CATEGORY
CHINKEE MAE M. ALANZALON Grade VI – Jose Rizal DAN ALFONSO VALENTIN V. SORIA TRISHA KATE E. GENERAL Grade V
– E.
Aguinaldo Researchers
Mr. MARK ANTHONY R. CUA Research Adviser Marcela Marcelo Elementary School Pasay City
October 2009
CHAPTER 1 INTRODUCTION One might think that chemists are a bunch of boring scientists who wear lab coats and look at beakers all day, but
did you know that many toys you play with are made using chemistry? Some of your favorite toys like Gak, Slime and Silly Putty started out as
chemistry experiments. In fact, some of your favorite toys may have been invented by chemists who work for toy companies like: Crayola, Play–Doh ...
Show more content on Helpwriting.net ...
Specifically, the study will seek to answer the following questions: 1. Would it be possible to make a homemade bouncypolymer from a simple
polymer found in white PVA glue and corn starch? 2. Which of the following ratio will produce the best homemade bouncy polymer? 3. What would
be the effect of the varying ratio of the ingredients on the physical characteristics of the homemade bouncy polymer? SIGNIFICANCE OF THE
STUDY Science is fun. It cannot only be learned in the four corners of the classroom but rather it can also be learned at home. Chemistry can be a very
intimidating subject that is hard for some students to understand. This project study would like to help demonstrate some basic principles of chemistry.
Specifically, this project study will help students understand that there is a difference between a physical change and a chemical change. Silly putty, as
well as bouncing polymer is fascinating and educational. It can teach everyone about Chemistry, Physics and Mathematics.
4

Results of the study would provide the pupils an opportunity to learn while having fun. Likewise, this study will provide opportunity to parents to have
some
quality time with their children. The result and findings of this study would give educators an alternative way of learning outside the classrooms. It
would also encourage them to use other
sources

Drive Your Discussion Guide : Drive Your Discussion Guide...
Drive Your Discussion Guide This gives Patients a detailed account of what life has been like with RA/PsA that they can share with their doctor.
This has the potential to make the conversation richer More efficient because less time is spent with the Dr. collecting data and more time is spend on
'now what' and next steps Serves as a way to remember what happened and how they are feeling, especially if the appointment falls on a good day
People are wanting to journal it and are wanting more from the guide More specific questions More like a log or journal of their RA journey over a
couple of weeks As is, the good day vs. bad day count should be a longer range of time like a month because 2 weeks can go by too fast There should
be a food... Show more content on Helpwriting.net ...
And they could use to exercise! There's something really appealing about getting a kit in the mail because 1) people like freebies 2) the putty can
only be experienced in real life, much like the disease. It's seen as almost gift–like in that Enbrel is doing something for them, making them feel Enbrel
really cares. No one knew what to expect from the kit based on the ad People expected to be able to complete the discussion guide online and that it
would be more than one piece of paper, because one paper doesn't capture the journal component which is people want from the guide. However, the
green sheet had interesting prompts The kit is more focused on pain but if there's tracking over time, it too can be associated with joint damage.
Tracking more hand pain signals a problem with the current medication and alerts the doctor to potential joint damage. Joint Damage Simulator For
many, this was seen as a scare tactic. But they believed there was value in being scared straight and they want to know what might be in store for them
This was an informative concept but did not meet a need the way the discussion guide did. However, it was generic and there was no part where
Patients input their own experience (treatment, exercise, and current mobility/functionality) which then altered the simulator. Does not reflect where
they are right now and how the Biologic might alter the

Physical Therapy Marketing Paper
The second project that will help enhance the marketing for RSM PT is the making of a 5k walk/run event during the month of October specifically
for physical therapy awareness month. My vision is to get the community involved and create awareness of the impact of physical therapy along with
physical activity. Each therapist is required to take an anatomical area (hip, knee, shoulder, back, neck, hands, feet and offer further information.
Consumers who are interested on a certain area can ask the therapist further information and potentially encourage them to set up an appointment for an
initial evaluation. Each therapist is required to sign up and have a booth in which they will have an activity or offer a brief lecture on one of their
specialties.

Setting up a Raspberry PI
STEP 1: SETTING UP OF RASPBERRY PI
пѓ Installation of raspbianos in raspberry pi.
пѓ Enabling SSH in pi for GUI.
STEP 2: CONNECTING PI WITH COMPUTER
RASPBERRY PI SIDE SETTINGS :
пѓ ifconfig command is used to find the ip address of pi.
пѓ To make the ip address static the following commands has to be given in LX terminal of pi.
sudocp/boot/cmdline.txt /boot/cmdline.normal sudonano /boot/cmdline.txt sudonano /boot/cmdline.txt ip=192.168.3.11 sudocp /boot/cmdline.txt
/boot/cmdline.direct sudo reboot
LAPTOP SIDE SETTINGS:
пѓ Installation of putty software in laptop.
пѓ Enable SSH checkbox in putty window.
пѓ Enter the ip address of the pi in the putty configuration window.
CONNECTING PI WITH COMPUTER:
пѓ LX terminal of pi will be displayed inwindows terminal.
пѓ Enter login id as 'pi' and password as 'raspberry'.
пѓ Now raspberry pi will be booted up and lot of files will be executed.
STEP 3: EXECUTING CODE THROUGH PUTTY
пѓ To execute the code,give the command as gcc –lm codename.c
пѓ Once the code is executed correctly, give the required input like new sample or testing.
пѓ Output will be displayed in laptop screen.
STEP 4: DISPLAYING OUTPUT IN LCD
пѓ Keypad and lcd are interfaced with raspberry pi through ATMEGA 8 microcontroller.

пѓ Communication between pi and microcontroller is done through serial console.
STEP 1: SETTING UP OF RASPBERRY PI
пѓ Installation of raspbianos in raspberry pi.
пѓ Enabling SSH in pi for GUI.
STEP 2: CONNECTING PI WITH

Touch Up Home Research Paper
Homeowners who are about to move out of their property will want to ensure that they take care of some necessary home repairs before their tenants
move in. Taking care of minor repairs in advance can save you a lot of money later on down the road. Touch–up Work Once your home is empty, it
will be easier to see where touch–ups are required. Use matching paint to cover up scuff marks, peeling paint from doors, minor scratches on the walls,
flaking paint from the window sill and elsewhere that could do with a lick of paint. If the paint is flaking, prepare the surface by sanding it down to
remove the old paint before adding a fresh coat of paint. Clean the Carpets It does not matter if you spent days cleaning, dusting and polishing the inside
... Show more content on Helpwriting.net ...
Is the problem really as bad as you think? Look at what has happened calmly and clearly, checking whether you can deal with it yourself or at least
limit the damage before calling out an expert. Leaking Pipe Turn off the water at mains stopcock. Then run the taps to drain the system. Turn off
electricity if the leak runs close to wiring or electrical fittings. If punctured by a nail, leave the nail in place. Call a plumber. Blocked Sink Or
Drain В· If the waste pipe from a basin or sink is blocked, try a plunger. В· Place a bucket under the basin or sink, open the trap in the pipe and
poke wire down to clear blockage. В· Try a proprietary drain cleaner. В· Call a plumber/drainage company. Cistern Problems Take the top of the
cistern off and see whether the ball cock is jammed. Shut off the water supply to the cistern. Hold flush down until the cistern is empty. If flushing
system needs replacing, take mechanism to plumber's merchant so you can buy the correct one. If this doesn't work, call the plumber. Blocked Loo
Use a plunger to try and loosen the blockage. If it clears, flush the loo several times to wash through. Open the manhole cover and try rodding the
blockage loose. If you can't clear it, you will need to call a drainage company who will have various sophisticated tools for removing the blockage.
Gas Fault This is a potentially deadly situation. Natural gas doesn't smell but

Butterfly Thermoregulation Lab Report
Extensive research has been conducted to test numerous factors that play a role in thermoregulation among butterflies. These factors can be both
internal or external which include: color of wings, body surface area, body mass, weather conditions, lifestyle, temperature, etc. The specific aim of this
experiment was to test whether different wingspan lengths played a significant role on thermoregulation rates. For the experiment three butterfly
wingspan lengths were tested: a control wingspan length, a wingspan length half the control, and lastly, a wingspan length twice that of the control.
Following the administering on this experiment, an ANOVA: single factor test was conducted to compare the three different wingspans and their
corresponding... Show more content on Helpwriting.net ...
Their measured wingspan lengths were: ___ (small butterfly), ___ (medium/control butterfly), and ___ (large butterfly). Other items needed to conduct
the experiment included: three 90–watt spectrum light bulbs, three temperature sensors, three clamp stands, three microcentrifuge tubes, LoggerPro and
ANOVA software, a computer, an excess amount of water, tape, and putty. To set up the experiment, a temperature sensor was placed into a
microcentrifuge tube following the addition of room temperature water. The sensors were used to measure the temperature change over the course of
ten minutes. Following each trial the water was replaced with new water to avoid any error. To secure the sensor a constant amount of putty was
placed abound the opening of the tubes, this also ensured that the water would not flow out during the trials. The "body" of the butterfly was then taped
to the center of the underside of each butterfly. The entire butterfly was clamped at 4 inches from the light source (90–watt light bulb), which was
clamped to the top of the ring stand. The butterflies remained under the light bud for ten minutes, during this this time the sensors collected data 6
times per minute. This was done a total of thirty times, ten trials per butterfly. After recording the data, a single factor ANOVA test was used to
determine if there were

Sprained Wrist Injury
sprained wrist is a common injury in all kinds of people, active and non–active. A sprain occurs when an extreme twist, bend or impact forces the wrist
out of its usual angles of rotation into a position beyond its normal range of motion, tearing the ligaments. There are three didn't grades of sprains that
can occur in the wrist just like the hamstring sprain meaning it is important to see a psychotherapist as soon as possible so that they are able to assess
the problem and devise a rehabilitation programme to fit the nature of the injury.
1–7 days' post injury – acute stage
Such as with any sprain injury or acute injury, applying the PRICE principles of protection is an important first step to help with the recovery of the
sprain.
This acronym stands for Protection. By protecting the damaged wrist is stops it from becoming prone to further injury. Rest. Resting the wrist is
important so that there isn't added pressure put onto the ligament which could set the recovery stage back further as it could cause chronic damage. Ice.
Applying ice to the damaged area will help to reduce the pain and reduce the swelling that may occur due to the injury. A way to apply the ice
effectively is to do it for 10 minutes then remove it for 10 minutes and apply it again for 10 minutes, repeating this every 1–2 hours for a 48–72–hour
period. Compression. Compressing the injured area will help to minimize the swelling. Although some of the swelling is unavoidable, too much
swelling may cause loss of function, more pain and worse blood ... Show more content on Helpwriting.net ...
In some cases, it is clear and in other it isn't therefore further tests will need to be carried out. If the wrist sprain is severe then the physiotherapist may
choose that immobilizing the wrist is best and put it into a splint for 1–2 weeks so that the ligaments have time to

Winter Year Research Paper
The winter months can become very hard on your home. Problems always arise during the winter months, and always seem more expensive. Start at
the first sign of winter, so you will have fewer repairs to make yourself through them cold winter months. Doing this yourself can save you a lot of
money in the long run. Tip #1– Clean Gutters / Fix Cracks You should make sure all debris are cleaned from your gutters right beforewinter starts and
then once in the middle of winter. I have found the easiest way to clean these if with a small set of garden tools. Use the shovel to scrape the leaves
out of there. Then use the small rake they give you to help. Once you have removed it all, take a garden hose and spray it off, making sure the water
drains correctly. If you ... Show more content on Helpwriting.net ...
He kept telling me no, I was basically crazy. A few days later, I went out back, and it was like a homemade ice ring. We have a craw space, or else our
house would have been partly flooded. They also sell thick plastic covers to cover your faucet. We have one, and will be doing all this at the end of
summer. You don't even want to know what our water bill was like for them few days of running water non
–stop. Tip #5– Caulk Siding You should
have a caulk gun ready with general winter caulk and start walking around your home. Place caulk around your dryer vent and any other vents you
have on the outside of your home. Caulk around any pipes or wires sticking out of your house. This way you can prevent any air from seeping in. This
will save money on your bills throughout the winter months. Tip #6– Furnaces Turn your furnace on and make sure everything is working correctly. If
not, get it fixed as soon as possible. If it's working fine, then turn it back off and take the front panel off it. Take out your filter, and vacuum out the
inside of the furnace. I use the smallest attachment on my vacuum, so I don't hit any wires on accident. If you have coil in there, use a soft brush. You
do not want to bend these

Gayle Forman's If I Stay
In the soulful teenage love story If I stay by Gayle Forman. Her main character
Mia finds herself questioning weather to stay alive or die. The overall theme of this book is sacrifices are necessary to make good choices.
Temporally suffering is required to make the right decision this shows through conflict. In If I stay Mia is describing her dad and how he plays
music at his shows. " At my dads old shows he used to feed souls with his zeal for music, unlike me there has always been a wall between me and
the audience" [70]. "My dads old shows" This is showing how Mia's dad has been doing this for a long time and talks about it like its in the past.
Mia's father sacrificed his life at the time, which was huge supporting his income, ... Show more content on Helpwriting.net ...
Adam is speaking about Mia and giving the okay and reviewing the damage she could potentially do. "Losing Mia will hurt it will be the kind of
pain that won't feel real at first, and when it does, it will take my breath away" [168]. Adam is attached to Mia head over heels for this girl but he
doesn't know which route to take go with Mia or stay with the band. The pain Mia will leave for her family "wont feel real at first" he will be
denial, numb and it could feel temporary. Mia has all this pressure of this decision even though the right decision would probably be to stay and
sacrifice of the new life she will live. This quote also represents a fight that Mia is showing a sacrifice she is making, going over all the reasons to
stay and live on through the life she was blessed with. "I summon all the love I have ever felt, I summon all the strength that Gran and Gramps and
Kim and the nurses and Willow have given me. I summon all the breath that Mom, and Dad, and Teddy would fill me with if they could. I summon
all my own strength focus it like a laser beam into the fingers and palm of my right hand. I picture my hand stroking Teddy's hair, grasping a bow
poised above my cello, interlaced with Adam's and then I squeeze" [234]. This is Mia's last hope to do anything with herself she is exhausted.
Reviewing all she has left to live for with Adam by her side give her enough strength to open up her eyes and finish her life out. By Mia continuing
her life she is sacrificing going to heaven with her parents. Facing a life much more difficult with out them. "I summon all my own strength focus it
like a laser beam into the fingers and palm of my right hand" Mia is very weak at this moment and she needs to just squeeze every little bit she has
left. This plan could backfire with her tiring her self out she could just heal with time and with the help of the nurses.

Cloud Computing : Services, Security, And Resilience
Cloud Computing: Services, Security and, Resilience Sai Prasad Setty Department of Computer Science, Florida State University, Tallahassee E–mail:
ss14ak@my.fsu.edu Abstract Eciency is one of the essential metrics that determines the acceptability of an operational system. In computing too
experts have had to tackle the issue of eciency in terms of space and time; and striking a balance between the two. With the rapid advancement in
technology over the past few decades, this exchange has evolved into a crucial trade–obetween performance and security. Cloud computing, a sort of
fruition of combination of numerous existing ideas like virtualization, client–server model of online service amongst many more, is presently
undergoing... Show more content on Helpwriting.net ...
The need for virtualiza– tion arises as these resources are shared amongst multiple users. The rst key aspect to note here is the fact that these services
are provided over a network. Hence, typical network security issues like threat/attack on availability is one such concern amongst many. The second
important detail to note here is that Cloud resources are gener– ally shared among multiple users. This provides ground for issues related to privacy.
Thirdly, as with any system that necessitates administrative supervision and manage– ment, proper security measures and good practices become
obligatory. In light of the above mentioned concerns secure, resilient and tolerant Clouds have become a hotbed for important research work. Thus, it
should be vividly clear and evident that security is equally signicant as performance. 2 APPENDIX A Cloud Environment Setup for Failure Injection
Experiment The systems used in this experiment are Amazon Web Services EC2 machines. Three instances of Linux machines are made active using
free tier services of AWS. Each Linux instance is given memory equally not crossing the cumulative limit of 30 GB. Apache Hadoop package is
downloaded and installed into three systems i.e. nodes of HDFS (Name node, Secondary name node, slave node). The AnarchyApe pack– age is
installed on all the three active systems (Linux instances) to inject failures. The Cloudwatch feature of AWS is not used as it is not available under the
free services

Essay On Engagement Call To Action
Engagement Call to Action
The Daily Performance Kit drew relatively more attention and intrigue than the other engagement concepts just within the context of the ad.
A few even brought it up unprompted as a point of interest
They were intrigued by the idea of getting a freebie sent to them
I remember seeing that kit. I remember that I wanted to see more of it. I saw everything laid out in the kit. I saw the papers. 3 or 4. There was a
diagram – RA, Phx
They wanted me to go get a kit...I think it had a questionnaire, something to bring to your doctor – PsA, Phx
You get a kit. It's telling you to track yourself so you can have an actual discussion with your doctor – RA, Ra
They said "Ask your doc for a kit" – RA, Minn
I remember it being ... Show more content on Helpwriting.net ...
This was pretty cool. The putty was cool. You can work the joints. The point of the putty is helps you pinpoint yourpain over the course of time. I'd try
this give it a go. I would use it for as long as they told me to. I would bring the results, the tracking to my doctor. I would bring to my doc to show him
which joints are feeling painful or stiff. He could prescribe something different – RA, Minn
The putty would stick out in your head. It is something test your joint hand strength. It gives you everything right there in your hand – PsA, Ra
Could empower people with PsA/RA... because you can track it. It does make irreversible joint damage more front and center. It can show you which
joints are hurting and which aren't – RA, Minn
The putty is great. I think I remember my doctor asking me to do something like that any I was like I don't have anything like that around – RA, Phx
Strengths
Patients perceived this tool as having a high payoff relative to the effort they put in, especially since the putty was a novel and interactive way to track
hand pain.
The tracking sheet transitioned the putty from purely a novelty to a useful tool
The informational sheets and questionnaire to note how RA/PsA is affecting everyday activities reflects exactly how symptoms manifest in real life.
Patients appreciated the level of depth the questions seemed to go into.
Offering this kit made Enbrel seem like

Analyzing The Poem 'Barbie Doll'
This poem dramatizes the conflict between society's perspective on normal and what is actually normal when it comes to appearances. The name of
the poem "Barbie Doll" is an allusion to barbies. The speaker of this piece began by stating "the girlchild was born as usual" meaning the child that
was born was the image of normal. The speaker states that a girlchild was born and was a normal little girl that played with barbies by saying "as
usual" (line 1). A classmate of the child informed her that she had a "great big nose and fat legs" (6). The child was intelligent and talented. "She
possessed strong arms and back" (8). She had a normal lifestyle for a while after the classmate's comment, but that did not last. "She cut off her nose
and her legs and offered them up" (17, 18). The child passed away and had an open casket with a putty nose on display and everyone thought that she
looked pretty. "To everywoman a happy ending" (25). The speaker is saying that society's point of view is everything perfect and ... Show more content
on Helpwriting.net ...
/ Doesn't she look pretty? Everyone said" (20–23). Undertakers are people who prepare dead bodies. With the pink and white nightie, putty nose, and
the makeup, she is completely rid of her impurities that the classmate pointed out. "Consummation at last" (24) the rhetoric of this line is by
reason of consummation meaning when something is complete or finalized and as a result of the girl cutting off her nose and her legs, she dies
and is finally perfect for them now. It is also ironic because dying should not be happy and should not make them feel content with her appearance
after she cut herself to pieces. The speaker ends the poem by saying "to every woman a happy ending" (25). The last line of the poem means that
every woman feels that way, women are supposed to be perfect, when they are not. The speaker is saying this is a happy ending for all

Poem Analysis: Marge Piercy's Barbie Doll
Character Analysis Marge Piercy's Barbie doll is a narrative poem about a young girl who was born normal, healthy and intelligent but is expected to
be a certain way and is chastised for her looks and ways of thinking if she does not fall into other people's societal norms. The poem starts off with a
description of a how a "girl child" (girl) is brought into this earth and how she is given presents that are archetypal to her gender. The toys are
described, "...presented dolls that did pee–pee and miniature GE stoves and irons and wee lipsticks the color of cherry candy" (lines2–4). As puberty
hits, the girl is told by her peers that her nose is too big and her legs are too fat albeit she is intelligent, healthy, and strong her peers only see what
they deem as flaws or what does not fall into their criteria of normal. The poem continues to say, "She was healthy, tested intelligent, possessed strong
arms and back, abundant sexual drive and manual dexterity" (lines 7–9). Even though she was very well put together it ... Show more content on
Helpwriting.net ...
The poem started showing the girl's good nature beginning to disappear. Her whole experience is essentially wasted trying to be someone she is not
and after it all she gets frustrated which leads to this excerpt, "So she cut off her nose and her legs and offered them up" (lines 17–18). People are
basically encouraging her to destroy and deface herself. The girl figured if society wants her to look a certain way she should change everything
altogether even though she risks a chance of killing herself, in a figurative way the writer is implying that by people telling the girl what she should
be they are essentially telling her to kill her identity; who she is, and be who they want the girl to be in doing so "killing" the very person she
embodies because of the burden of expectations that have been imposed on

Filler Compound
The make–up of filler compound consists of multiple elements, including polyester (fibreglass) resin and talc. The talc powder incorporated is the
very same as everyday talcum powder. But the grade of the talc is what dictates the type of filler produced. High Build Filler The heavier, or bulkier,
grade of powder talc produces a product that is very easy to sand and has great build properties. Its consistency is smooth, and this allows for easy
application and shaping. This type of product, such as ProWorx Swift, is for all types of repairs. It is high–build filler with a rapid drying time. The
quick drying time of this product means it is easy to sand and does not clog abrasives. Such a high–load filling capacity make this grade of product a
great all–round filler which is easy to apply. It is ideal for large and heavy load repairs with large damage surface areas, as well as working perfectly
on small repairs. The quick drying and quick sanding attributes of this product make it excellent at minimizing both valuable time and effort.
Premium/ Universal Filler Following this is the next grade of auto body filler, which is a premium grade which has extremely easy sanding
properties. This level of material is suitable for repairing scratches and dents on all surfaces. It is a tighter grain filler with great finish qualities.... Show
more content on Helpwriting.net ...
They also have a much tighter grain and due to this are far less prone to pinholes, as is seen with ProWorx Pearl which is an ultra–light filler putty.
This products design is for both the great build characteristics and their excellent capacity for finishing work. Putty fillers are a perfect choice for
small repairs as well as the levelling out any final surface imperfections before the priming process. This type of product is used for professional grade
auto body repairs and facilitates a finish which reflects

Essay on Challenger
On January 26, 1986, one of the greatest disasters of our time occurred. When Challenger was destroyed many questions were asked about the safety
of space missions. Many questions were asked about the credibility of the engineers who designed the air craft.
It is now know that crucial information about the faulty O–rings was know to many if not all of the engineers. These engineers had many moral
decisions they had to face when the problem was first noticed, which was as early as
November 1981.
When a shuttle is launched their are two booster rockets attached to the side of it that disconnect when the shuttle gets into orbit. The rockets that were
on the Challenger were manufactured by Morton–Thiokol, an engineering
company. ... Show more content on Helpwriting.net ...
The night before the scheduled launch of Challenger, a teleconference was held between engineers and management from the Kennedy
Space Center, Marshal Space Flight Center in Alabama and Morton–Thiokol in
Utah.ii Boisjoly, and Ernie Thompson another engineer from Thiokol knew this was their last chance to stop the flight from taking off. Robert Lund,
Thiokol's
Engineering Vice President showed that 53 degrees "was the only low temperature data Thiokol had for the effects of cold on the operational
boosters."iiiBut they had no data that did prove that it was unsafe to launch at lower temperatures.
Boisjoly and Thompson were unsuccessful in "blowing the whistle." The next day the Challenger took of from the Kennedy space Center;
"a rush of cotton–candy like smoke washed over the cockpit windows, possibly accompanied by a brief burst of brilliant orange flames. Almost
simultaneously, the astronauts were crushed down in their seats by a force at least 12 times greater than gravity."iv
After the disaster Boisjoly went to his office, where he stayed and thought.
Some of his colleagues came in to see how he was doing but he could not even speak, he was so over come with emotion. Their were many factors that
effected neglecting the O–rings. For one NASA had a billion dollar contract with Thiokol before the disaster and Thiokol felt that causing any
problems by expressing
Boisjolys concern

Process Essay: Why Alligator Fracking Is Hard
Heavy cracks often appear in asphalt, a problem which can significantly decrease the curb value of your home. One of the most destructive of
these crack type is alligator cracking. Identifying this problem and taking steps to remedy it can help you get your driveway looking as good as
new. Identifying Alligator Cracking The first thing you need to do is identify whether or your asphalt is truly suffering from alligator cracks.
After all, there are multiple types of asphalt cracks and each of them should be assessed and repaired in slightly different ways. Alligator cracks look a
lot like the skin of an alligator: they generally form a series of connected cracks that form small polygons of similar shape and size. Generally, these
polygons are less than a foot or so wide. Alligator cracks are common in parking lots and other areas of... Show more content on Helpwriting.net ...
First of all, you need to kill any weeds of grass that may have grown in between the cracks. They will push the asphalt slabs apart and can cause
even more extreme damage. Start by hand picking any weeds of grass that you can and throwing them away. Now, spray some vinegar on the
weeds to dissolve the plants and kill their roots. After you've applied the vinegar, pour boiling water in the cracks to further damage the structure
of the plants. If that doesn't do the trick in a few days, add a chemical herbicide with a spray applicator. Once these plant growths have disappeared,
you can work on repairing the alligator cracks. Sealing the Cracks Generally speaking, cracks in asphalt need to be sealed sooner, rather than later.
However, if you've developed alligator cracks, it's already a little too late to eliminate the damage. Some people may prefer simply removing the
cracked sections and repaving it with new

Nt1310 Unit 3 Networking Tools
Networking tools
Wireshark
What is it?
Wireshark is an open–source program which enables users to actively capture and interact with the network traffic which is being funnelled through the
computer. Commonly, pieces of software which do this are referred to as 'packet sniffers'– As the program is recording the packets which pass through
the network.
Wireshark started development in 1998, under its original name 'Ethereal', which was changed in 2006 following a licensing issue.
How is it used?
Above is a screenshot of the main interface, courtesy of Wireshark. Quite simply, you start the capture by clicking the shark fin, with the results shown
in the main window. Clicking on an entry expands on it in the bottom frame, allowing you to see the full ... Show more content on Helpwriting.net ...
On top of this, PuTTY also offers limited FTP facilities which can be used to transfer encrypted files.
In today's world, PuTTY is mainly talked about when referring to dedicated server; where an SSH client has become a common swiss–army knife in
everyone's toolbox.
How do you use it?
The main interface is shown below, courtesy of ComputerWorld.
The simplest way of using PuTTY is to fill in the host–name/IP and specify the port and connection type. The session can then be saved to be loaded
at a later point.
When the open button is pressed, a command–line interface will be displayed; which ends the GUI interface of PuTTY. From there you're able to
setup iptables, install various packages and change the root password.
The PuTTY experience can be further customised by editing the settings shown to the left in a tree view. This includes the appearance, as well as how

PuTTY manages the connection.
Fiddler
What is it?
Fiddler is a notorious web–debugging tool which captures HTTP traffic between chosen computers and the internet. The incoming and outgoing data
can be analysed and modified before the responses make it to the

Wound Strength: A Case Study
Activity #3– Implement the use of assistive and adaptive devices such as splints, magic opener, wheelchair, reacher/grabber.
Rational: the use of assistive devices can minimize energy spending and prevent and injury with activities.
Approach: Biomechanical
Functional problem #5: Decrease grip strength in both hands
LTG: Client will increase grip hand strength to 32. 2 kg by evidence of full functional use of hand independently in self–care, vocational, leisure, and
social activity in 4 weeks.
STG: Client will demonstrate increase grip strength in both hands to 10 kg by performing daily activities with Mod A in 1 week.
Activity#1: Client will practice on hand strengthening exercises with use of digit–flex.
Rationale: In order to facilitate ... Show more content on Helpwriting.net ...
Rationale: Therapy putty has been used in rehabilitation center to improve grip strength, dexterity, and hand strengthening on clients with poor hand
control.
Activity #3: Client will use theraband to perform progressive hand resistance in the gym.
Rationale: Theraband can improve strength and range of motion in hand muscle and joint by adding resistance to simple exercises.
Functional problem # 6: Decreased fine motor skill of the fingers in both hands.
LTG: Client will be able to complete ADL and IADL independently with the use of her fingers in 4 weeks.
STG: Client will don activities such as: writing, holding a spoon, picking object with the help of adaptive equipment in 1 week.
Activities #1: Client will perform feeding with the use of built up handle utensils.
Rationale: Built up handle utensils will promote hand grasp and help clients feeding.
Activity #2: Push and take out beads into play dough.
Rationale: This activity work out finger muscles, promotes pincer grasp and favorites hand' dexterity.
Activity#3: Make a collar with beads
Rationale: Making a collar beads will promote hand coordination and grasp which will prepare to do activity such as: Button/unbutton, writing on paper
and holding

Popped Drywall Nails: Common In New And Old Homes
Popped drywall nails are extremely common in new and old homes. Nail pops are bumps or crescent–shaped cracks in walls. Nail pops occur when the
construction nails loosen and pop out from the surface of the drywall. However, these type of repairs are relatively inexpensive and simple to fix. You
will need the following tools and materials: hammer a drill or screwdriver or pliers a nail set, 1–5/8–inch drywall screws, 1–5/8–inch drywall nails,
drywall compound, sand paper, a putty knife, primer, and paint First, remove the excess drywall around the nail and expose the nail head. Using your
drill, screwdriver, or pliers, remove old screw or nail from the wall. Next, add a new screw approximately 1.5 inches above and below the old screw

Robotic Arm: Foundation Report
Foundation Project – SAT0300
1.Introduction – History of the Robotic Arm
For my report, I will be reviewing the main contributing factors and innovations that have led from the invention of the robotic arm during the late
1950's, all the way up to the 21th century implementation, that has led to the full–scale automation of many industrial jobs.
The first programmable robot, crudely named the 'Unimate' was created and designed by George Devol and Joseph Engelberger in 1956 (Rosen,
2011). The apparatus, although now seen to be very primitive, was revisionary at the time as it's motors could reach an accuracy of 1/2500th of a
centimetre. Devol simultaneously coined the term 'Universal Automation' (History of Industrial Robots, 2012). ... Show more content on
Helpwriting.net ...
During 2004, Motoman continued making robotic arms, equipped with a touch screen display, capable of moving 38 axes.
Up until now, magnetic drums were used as the primary storage device for most of robotics. This changed however when the first
minicomputer–controlled industrial robot, the T3 (The Tomorrow Tool), came to fruition (History of Industrial Robots, 2012). As there were less
moving parts in the base, it allowed for a massive downsizing of the dimensions needed for such a machine.
1979 brought around the first ever electric, motor powered robots, making the previous hydraulic powered appliances eventually redundant. Soon after,
Takeo Kanade built the direct drive arm. It was the first robot to have the motors installed directly into the joints of the arm, contained within the robot
itself (Pasca, 2003). This made its movements faster and accurate than any other robot at the time. In 2010, Fanuc of Japan was the first company to
launch a robot with "Adaptive iterative learning control", meaning that it could react to the environment without any additional or preconditioned
programming. This improved safety dramatically for the work force as the robot would be forced to stop its current job to prevent an accident from
occurring (History of Industrial Robots, 2012).
2.Design
To start off with, we were tasked with planning and building a small robot arm, named the MeArm. We then had to think of 3 different potential
projects,

Test For A Leak In The Kitchen Sink Basket
If you noticed a small puddle or drops of water under your kitchen sink, the leak may be coming from the basket strainer. Here is how to test and
see if the basket strainer is the source of the leaks and how to replace it if it is. Test For A Leak In The Kitchen Sink Basket The first thing you
need to do is confirm that your suspensions are correct. You can do this by first wiping away any water that is on the plumbing under your sink so
you can run a leak test. Then, fill your sink up with water and touch a tissue to the basket strainer and the bottom of your sink under your cabinet. The
basket strainer is the device that connects your sink to your drainpipe. It is generally made of metal and held in place by a gasket and luck nut. If the
tissue gets wet, the leak is coming... Show more content on Helpwriting.net ...
The coupling nut should be located at the base of the strainer basket where it meets with the threads and the drainage pipe. Once you have
disconnected the drainage pipe from the basket, you need to remove the basket. Use your slip–joint pliers again to unscrew the strainer locknut that is
located on the top of the basket near the base of the sink. This lock, as the name implies, holds the basket in place. If the locknut is rusted over,
you'll want to spray some penetrating oil on it to loosen it up. If that doesn't work, use pliers to turn it or knock it out with a chisel and a hammer.
When the locknut has been removed, you can finish removing the basket. You will have to unscrew the basket in order to remove it. You can use
your pliers to assist you with unscrewing the basket. After you unscrew the basket, lift it out of the sink from the top and remove the locknut, gasket
and friction ring from the bottom of your sink. Use a putty knife to scrape away any putty that is stuck to your sink, but be carefully not to be too
aggressive and damage your sink. Attach The New

The Challenger Disaster
The Challenger Disaster
By: Kathy Neuner & Jeremy Rider
Executive Summary Many factors must be examined to find the underlying reason for the horrible disaster of the space shuttle Challenger. We will
cover both the technical causes to the disaster and the communication breakdown with NASA. We will also look at the outside pressure that NASA
was receiving from the media, congress and the military. Recommendations for NASA and anyone in the communication field will be given. These
recommendations will help to avoid any further problems with communication in any organization. The O–rings failed to properly seal the gap in the
joint seal. Failure of the Orings was the ultimate mechanical cause to the explosion of the Challenger. ... Show more content on Helpwriting.net ...
If the Orings do not properly seal these gaps it is possible for exhaust gasses to get into the internal structure of the joint field. The extreme
temperatures of the exhaust gasses are too high for the internal joint, known as the Tang and Clevis, to handle. The Tang and Clevis are the two main
parts of the joint. They are mating sections that are held together with one hundred seventy–seven pins. Without the O–rings, the Tang and Clevis are
not able to withstand the extreme pressure of exhaust gasses.
3
Figure 1. Cross section view of field joint located in the Solid Rocket Booster
Four Technical Problems First let's look at the four mechanical aspects of the Challengers problems, blow holes, O–Ring erosion, joint rotation, and the
response of O–Rings during low temperature. The condition of the primary seal is essential to the successful operation of the rocket booster. Engineers
had to make sure that the seal was not damaged, so they increased the pressure of the leak test to above the pressure that the putty could withstand.
This was supposed to make sure the O–ring was correctly covering the gap without the help of the putty. Blow holes were tiny tunnel–like holes that
were left in the zinc chromate putty of the rocket booster insulation. The putty was supposed to protect the O–rings from the hot exhaust. The holes
were a result of pressurized test known as the leak check port. The leak test left engineers worried; they didn't think that the

Termite Holes
Own A Log Home? What You Should Know About Restoring Termite Damage If you have a log home, you are most likely aware that it is more
susceptible to termite damage. A small hole could cause major problems with rot within a log, which is not good for the exterior of your home.
That's why you must know how to identify problems with small holes caused by termites, as well as how to patch them before they end up being a
major problem. Preparing Termite Holes Before you are able to repair a hole caused by termites, you'll need to clean it out. If the wood surface is
smooth and flat, the filler material you use will have a better chance of bonding to the wood. You can clean out the inside of a small hole using
sandpaper, but you could also hollow... Show more content on Helpwriting.net ...
After the putty has been applied, it needs a stain so that the patch will match your home's log exterior. Be aware that the stain you last used on your
home's exterior won't be a perfect match, sine the wood has been exposed to the sun and most likely has faded over the years. You'll need to use a
stain stick, which is wood stain that rolls on like chap stick. You may need to try several stains until you find one that is a perfect match after it
dries on the wood putty. Using a Liquid Patch A liquid wood patch will do a great job at penetrating deep into your home's wood exterior, and will
actually hold wood grains together which prevent the wood from cracking further. The biggest drawback is that the liquid patch is difficult to paint or
stain, so you must get the color right when you are buying it. While you now know how to patch those termite holes in your log home, it won't matter
if you don't get rid of the termites for good. If not, they'll just keep coming back and making more holes. Work with a local exterminator that can help
get rid of those termites before you start any

Is the Coefficient of Restitution Constant for All...
Introduction
When an object collides with another, momentum is conserved, but kinetic energy is not.
This experiment was designed to find if the coefficient of restitution, e, changes for high–velocity collisions. At low velocities colliding objects will
tend to maintain their shape, size and elasticity, so e is likely to be constant over a range. However, at high velocities colliding objects may change
their physical properties and therefore a change (probably a reduction) in e may be observed.
A small reduction in e was observed, but this was probably accounted for by air resistance and not a change in the material.
Theory
When a collision occurs, total momentum is conserved, but kinetic energy is not. When a ball, for example, ... Show more content on Helpwriting.net ...
It is more likely that air resistance accounts for the observation.
The experiment could be improved by increasing the drop height past 3 metres (this may increase the effect that was sought), having multiple cameras
(to save time in adjusting height) and including air resistance in the theory.
––––––––––––––––––––––– building tube
putty
building
tube
putty
building
tube

putty
H
h
[pic]
[pic]
Ball
Camera

LAB 2 Essay
LAB
Network Documentation
2
Introduction
In this lab, you will learn how to use various tools and techniques to determine and document IP network design. You will use the Windows Command
Prompt to generate network traffic; Wireshark to capture and analyze the generated traffic; PuTTY to remotely access the Cisco Switch; and finally,
you will issue IOS commands on the Cisco Switch to understand its various interfaces and inner workings.
Learning Objectives
Upon completing this lab, you will be able to:
Develop a plan for identifying and documenting the logical IP network design and IP addressing schema based on data collected from Lab #1
Use PuTTY to establish Telnet and SSH to the IP addresses of the identified... Show more content on Helpwriting.net ...
You will use this information to complete the deliverables for this lab.
FIGURE 2.3
Windows Command
Prompt window
7.Repeat step 6 for the following IP addresses to create a packet stream for Wireshark.
172.30.0.2
172.16.8.1
172.17.0.2

172.16.0.2
172.19.0.1
172.19.0.2 8.Minimize the Windows Command Prompt window. 9. Double–click the PuTTY icon on the desktop to start the PuTTY application.
Note:
The next steps use PuTTY, a terminal emulator program that you can use as a client to create a variety of secure connections to network resources.
This lab uses it to create Telnet and SSH sessions.
Hands–On Steps
21
10.In the PuTTY application window, type the IP address for LAN Switch 1, 172.16.8.5. Select the Telnet
radio button and click the Open button to start the connection.
FIGURE 2.4
PuTTY application window 2
a.Username: cisco
b.Password: cisco
FIGURE 2.5
PuTTY terminal console window Network Documentation
11.PuTTY will launch a terminal console window. At the login prompt, type the following:
22
LAB #2 | Network Documentation
Note:
The next steps involve using the Cisco IOS show command to obtain network documentation information from the interface you've connected to (LAN
Switch 1). Cisco IOS is a package of routing, switching, and networking commands integrated with a Cisco–specific operating system, of which the

show command

Graphene : A Sheet Of Carbon
Graphene, a sheet of carbon that is a single atom thick, is the strongest material on earth, silicone–based putty (or silly putty) is the one of the softest,
and oddest. When the two got together, electricity happened.
Approximately two–and–one–half years ago, researchers in Jonathon Coleman's lab combined broken sheets of graphene with the toy putty and created
G–Putty, a super–sensitive material that detects minuscule changes in pressure to the material. When they placed G–Putty on a lab mate's skin, and
connected it to a monitoring device, they could detect his heart beat and respiration.
Curiosity, not usefulness, drove the team's actions. Prof. Coleman said that his lab at Trinity College in Ireland routinely practices household science,
to help them understand the properties of the two–dimensional nanosheets they study in the lab.
The lab studies the physical properties of two–dimensional materials that are the width of a single atom to determine how they can be used to improve
our health and our quality of life. It also has a reputation for using common household items, like kitchen blenders and Silly PuttyВ®, in their
experiments.
"I like the sort of stuff where you can do science at home," Prof. Coleman said.
"Recently we 've shown how you can make graphene a home in a blender using pencils and a household detergent. The silly putty: we made it
ourselves using a homemade recipe of oil and boric acid. Everything is doable at home," he added.
Graphene is a new

Irony In Marge Piercy's Barbie Doll
Inside our society there is an desire for women to be flawless when it comes to looks. There's so much value and feeling of nervousness when it
comes to a female fullfilling that image of looking like barbie. In the poem "Barbie doll," by marge Piercy, I see proof to this idea in the poet's use of
irony, imagery and her attitude on the significance of words interfering with a woman's self confidence.
To begin, Piercy's use of irony is felt near the last few lines of poem. The ideal that people could say a person is pretty when they are no longer alive
and they cant hear it is sad. "Doesn't she look pretty? everyone said." (23) when someone die they are made–up to look their best. It is brought out in
these lines "the undertaker's cosmetics ... Show more content on Helpwriting.net ...
At that moment in time the girl is dead but she gets a disturbing ending by being called pretty. I notice the speaker sarcastic tone and the reason for that
is these girls are dealing with expectation that are harmful.
Last, her attitude on the significance of words having a bad outcome on the self–esteem of females is seen in the way she speaks about what her
classmate tells her about her appearance. "You have a great big nose and fat legs." (6) These words stick with afemale who has low self–esteem, they
begin to believe it. On the other hand if it a female full of confidents who's brought up knowing looks arent everything, she is not effected she just
brush it off and keep it moving. The poet repeats this line "everyone saw a fat nose on thick legs." (11) to show that the female still remembers what
others are thinking about her. Some women can only take so much criticism and eventually they give up.This is exactly what happen to the girl in this
poem."Her good nature wore out like a fan belt." (15–16) women are caught up too much on how other people view of

Essay about Timeline of Tolkien's Life
In 1902, Cuba peacefully gained independence from the United States. A few years earlier, the U.S. had aided Cuban rebels in exorcising Spain from
the colony. In 1898, after three years of fighting, Spain signed a peace treaty with the U.S. relinquishing its hold on Cuba, but no Cuban delegates were
present. However, the Teller Amendment (4th Article of the Joint Resolution) confirmed that the U.S. would not permanently remain in Cuba. Cubans
lobbied for an early execution of the Joint Resolution. After much resistance in the U.S., the Cuban Constitutional Convention met in 1900. Then, in
1901, the Cuban Constitution was completed, including an appendix allowing U.S. intervention if needed. Finally, in 1902, TomГЎs Estradas Palma was
In 1918, the Germans were forced back behind the Hindenburg line, freeing occupied France. Finally, On June 28, 1919, the Treaty of Versailles
was signed between Germany and the Allied forces, officially concluding World War I. World War I was known as the first 'total war' because it
was fought on land, on sea, and even in the air. WWI was also known as 'the war to end all wars.' Tolkien met Edith Bratt as a teenager when they
(both orphans) had lived at Mrs. Faulkner's boarding house. At the time, Edith was 19 and Tolkien, or Ronald (as his friends called him), was 16.
Edith and Ronald were inseparable, but she distracted him from his studies. When Father Francis, Ronald's guardian, discovered their relationship,
he forbade Ronald from seeing Edith until he was 21 and moved Tolkien and his younger brother to different lodging. At the time, Ronald was 17
but did as he was told and once again focused on his studies. Several years later, the minute the clock struck midnight on his 21st birthday, Ronald
wrote a letter to Edith declaring his unending love. Edith wrote back with the shocking news that she was engaged to someone else. Tolkien went to
visit her and the two went on a walk. On that walk, Ronald convinced Edith to break off the engagement and marry him instead. Finally, on March 22,
1916, John Ronald Reuel Tolkien married Edith Bratt shortly before he was sent to France as a signaling officer in WWI. In 1925, J.R.R. Tolkien
moved to Oxford, his Alma Mater, to

Pictorial History of Prosthetics
In the early years of film, make–up artists were not recognised for their artistic skills and ingenuity of making prosthetics or their imagination of
bringing others creations to life. Many of the artists were also actors or stunt men who learnt the craft by applying their own make up for film and
theatre. Compared to today's materials used to make prosthetics, many of the materials they used were very basic as they used spirit gum, fish skin,
cotton, gelatin, greasepaints, collodion, cheesecloth, clay, Fullers Earth, various putties, pastes and wax and latex. The first documented prosthetic was
in the 1909 book "The Art of Theater Make up" by Cavendish Morton, who when transforming himself into the character Falstaff used silk attached to
a wig, nose paste, spirit gum, crepe hair and greasepaints. By the 1920's Lon Chaney was recognised for his ingenuity of make–up and was known as
"The Man of a Thousand Faces" as he had the ability to change his appearance into any character he was portraying. For example when in the film
The Phantom of the Opera he used wire to widen his nostrils and pull his nose back and completed the horrifying character by wearing jagged false
teeth and clever use of shading to give the impression of a skull like face. He also changed his complete face when playing the role of Quasimodo in
The Hunchback of Notre Dame, as he created the twisted face by using false teeth, nose putty on his cheeks and a false eye. In 1932, Jack Pierce turned

Oppositions In Thomas Elsaesser's The Public Enemy
It is very interesting that Thomas Elsaesser would dissect one of the more iconic Gangsters flick back in the beginning era of sound The Public Enemy
by laying out its layers of oppositions as a narrative of keeping everything coherent in the storyline and stitching together how that have established the
iconic on–screen appearance and character of Tom Powers. It is definitely agreeable that the movie itself is full of oppositions: Tom and Mike
versus Tom and Matt. Tom and Mike has a sibling rivalry that goes on throughout the entire first half of the movie. Mike is an established educated
young man who enlists himself as a marine during the war. Tom is a direct opposition of that as an outlaw whose life is constantly tangled with
crooked jobs. And then this entire pair of opposition is than opposed to Tom and Matt who are inseparable childhood friends. Tom even says that "I'm
always alone when I'm with Matt". According... Show more content on Helpwriting.net ...
Mike, on the other hand, moved on to join the army and later on to his future wife. Whereas in Power's case, the man cannot seem to reallocate that love
anywhere which resulted in Elsaesser's accusation of Tom's confusion. The only few times Tom gets to be with other women its either something
extremely brief and interrupted or the female overpowered Tom. This leads to Elsaesser concluding that Tom has incestuous feelings towards her
mother. In conclusion, The Public Enemy is a movie of multiple layers and oppositions made intentionally to stitch together a storyline that would have
otherwise been a series of separate episodic events. The movie is reflexive of the time with the war, the Prohibition in the picture which, in a way, has
established a somewhat opposing stand against established intuitional powers with the image of the

Rundown Research Paper
Plumbing issues are unavoidable. They'll happen in homes both old and new. So in the event that you need to handle a venture in your own particular
home, consider a couple of the essential devices that an expert plumber continues hand. This rundown gives a portion of the more essential apparatuses
to help you handle a pipes work. The second 50% of the rundown demonstrates what is required for more mind boggling needs. With everything taken
into account, these rundown endeavors to show what things are best for an expert toolbox. Fundamental Tools A couple of needle
–nose pincers will
permit you to get into little spots where different apparatuses wouldn't fit. When you can't reach with fingers yet require a tight hold, needle–nose
pincers... Show more content on Helpwriting.net ...
This kind of tape is fundamental for essential releases, for example, on a shower head or a fixture underneath a sink. This is one of the most
straightforward things plumber employments. Putty is utilized for making seals as a part of territories where holes are available. Plumber's putty is
likewise utilized on breaks as a part of sinks where standing water gradually dissolves the split, intensifying it after some time. Locking forceps are
basic for occupations underneath a sink, or where a great deal of different things act as a burden, for example, channeling or tubing. On the off chance
that you find that you can't persistently straighten out the torque to continue utilizing it, locking forceps are immaculate in light of the fact that they'll
stay put. While essential forceps are speedier for specific occupations, for example, zones that square you from making a 360–degree turn, locking
pincers give a vastly improved hold. Complex Tools While doing pipe work, a tubing cutter will help you slice the pieces to the proper size. This is
particularly great on the off chance that you've obtained utilized or re–purposed things that may not come in the size you require

Comparison Of 1930 And 1940's Inventions
In the 1930's and the 1940's, there were many new and creative inventions that make life easier today. Just imagine life without television, a
microwave, or even air conditioning. Well, thanks to the 1930's and 1940's you aren't devastated and grateful for what you have. In the early 1930's air
conditioning was invented by Willis Carrier. It was not like the air conditioning we have today, back then the air conditioning systems were not aimed at
human comfort, however they were designed to control the humidity. Anotherinvention that many people use today is colored television. In 1940 CBS
began experimenting with color field tests using films as early as August 28, and live cameras by November 12. One of the greatest inventions

Arthrogryposis Research Paper
Arthrogryposis condition description paper Definition "Arthrogryposis is a condition that causes joints to be stiff and crooked at birth. The individual's
intelligence is relatively normal. The patient will have stiff upper and lower joints, with fixed internal rotation of the shoulders, extension of the
elbows, flexion and ulnar deviation of the wrist. The lower extremities will exhibit external rotation of the hips and knee flexion contracture" (Reed,
2011). Etiology "Arthrogryposis is caused by impaired utero movement for longer than 3 weeks. The impaired physical movement can be caused by
uterine malformations, multiple gestations, or oligohydramnios, which is too little amniotic fluid surrounding the baby in the womb. Lack of movement
For example, if the child uses their forearms in a pronated position to carry items, stretching the muscles may reduce the ability to functionally
performing tasks. The biomechanical theory is the typical frame of reference used in the treatment sessions. Biomechanical treatment of stretching,
positioning, and proper joint alignment can be beneficial for increased joint ROM. The areas of occupational performance that are affected due to
limited ROM and hand grasp would include ADL's of dressing, grooming, feeding, toileting, playing, education, and social roles. The performance
components that might be affected are restricted ROM, bones and joints that are bent or curved in atypical position. The child's fingers and thumb may
not have active movement, joint stiffness, muscle weakness, and trouble ambulating if the child has club feet. Psychosocially the child may have
self–confidence issues and dependency behaviors" (Reed, 2011). "The focus for evaluation and treatment could involve use of tests to see what the
current functional ability is, in the occupational areas of their life. One test that is used to evaluate the physical functioning of the child in the
community, is the Activity Scales for Kids. The general treatment goals are for the child or adolescent to participate in age appropriate tasks through
problem solving and adapting to their environment" (Reed,

Hmbr, Bangladesh
1. Introduction: HMBR is one of the famous names in the business world. It has achieved its fame for its classic quality and for the maintenance of
individuality in the trading and manufacturing world of Bangladesh since its arrival in 1984. It has imported and manufactured necessary hand tools,
chemicals and household products for satisfying need. HMBR has introduced advanced technology from Japan, Korea and China, and thus have
adopted the best production base for their chemical products. They intend to place high emphasis on product quality; as such they regard their
reputation as the most important asset when selling in the market. Their mission statement is "persistence, dedication and quality". They are capable of
offering... Show more content on Helpwriting.net ...
HMBR basically transports to three main areas. It transports its products to local dealers of sanitary ware, household tools shops, and carpentry
shops. This is of course where most of their distribution is focused on because they are their biggest customers. Next packaging materials which
are also made in the facility are shipped to other companies and outlets who sell other products using that packaging. Lastly shipment is also given
to their very own local retail division. After receiving the list from the pantry and the goods are sent down for shipment, he gives list to the
delivery personnel, explains where to go and how to get there, makes sure they fully understand there duty and then sends them on their way. The
delivery team have at their disposal 4 large delivery vans and 3 rickshaw vans which are the means by which the products are distributed. Of course
the 3 rickshaw vans are for the short distances and the automobiles are for the large distances. Distribution of goods takes place everyday but not
necessarily to the same places, usually each customer orders weekly. Target Markets Target market for HMBR in general can be broken down into the
subdivisions of the products or services they provide. Firstly the tools and household products that they import as well as the products they produce are
firstly targeting the dealers of sanitary ware, household tool shops, and carpentry shops. From their retail outlet perspective

Advantages Of Raspberry Pi
Abstract–Raspberry Pi is a credit card sized embedded computer running Embedded Linux OS, using which a fusion of projects and applications that
require embedded systems and a computer can be implemented. This project aims at implementing one such project that can be used in any company,
college or offices. But probably the best application of this project is in colleges. Over the years many projects related to college automation,
classroom automation and digital notice boards etc have been implemented by students, but all of these projects have had many drawbacks and
limitations. In this project a Raspberry Pi based multi faceted solution is proposed that can do virtually all these applications in a better and a more
comprehensive way.
Including ... Show more content on Helpwriting.net ...
It consists of set of basic programs and purposes that makes the Raspberry Pi run successfully.
Raspbian provides more comes with over 35,000 packages; pre–compiled software bundling in such a format for easy installation on to the Raspberry
Pi.
Putty configuration and VNC viewer are needed to install
Raspbian OS. Putty configuration is SSH and Telnet client .It is an open source which is available with source code. Virtual network computing is a
Graphical sharing desktop that shares system and allows to remotely control the desktop interface of one computer to another. The
Raspberry Pi uses Linux based operating systems .The
ARM11 is according to the version 6 of the ARM on the linux no longer run (in current releases), including the
Ubunto.NOOBS is used as the install manager in the
Raspberry Pi. The OSs included with NOOBS are:
Arch Linux ARM
Open ELEC
Pidora (Fedora Remix)
Raspb and the XBMC is an open source digital center. RISC OS – It is the first operating system of ARMbased computer on reduced instruction set.
Raspbian maintains independent foundation; based on the ARM hard–float(armhf) Debian 7 'Wheezy' architecture port which is originally designed for

Intermolecular Forces
Oakland Schools Chemistry Resource Unit Intermolecular Forces Brook R. Kirouac David A. Consiglio, Jr. SouthfieldвЂђLathrup High School
Southfield Public Schools Bonding: Intermolecular Forces Content Statements: C2.2: Chemical Potential Energy Potential energy is stored whenever
work must be done to change the distance between two objects. The attraction between the two objects may be gravitational, electrostatic, magnetic, or
strong force. Chemical potential energy is the result of electrostatic attractions between atoms. C3.3: Heating Impacts Heating increases the kinetic
(translational, rotational, and vibrational) energy of the atoms composing elements and the molecules or ions composing compounds. As the kinetic...
Show more content on Helpwriting.net ...
Now we will focus on intermolecular forces. The Nature of Intermolecular Forces: The Intermolecular Forces (forces between molecules) are weaker
than Intramolecular Forces (The Chemical Bonds within an Individual Molecule). This distinction is the reason we define the molecule in the first
place. The properties of matter result from the properties of the individual molecule (resulting from chemical bonding) and how the molecules act
collectively (resulting from intermolecular forces). Intermolecular Forces are longest–ranged (act strongly over a large distance) when they are
electrostatic. Interaction of Charge Monopoles (simple charges) is the longest– ranged electrostatic force. Charge–Charge forces (found in ionic
crystals) For like charges (+,+) or (–,–), this force is always repulsive. For unlike charges (+,–), this force is always attractive. Charge–Dipole Forces:
An uncharged molecule can still have an electric dipole moment. Electric Dipoles arise from opposite but equal charges separated by a distance.
Molecules that possess a dipole moment are called Polar molecules (remember the polar covalent bond?). Water is polar and has a dipole moment of
1.85 Debye. The Debye is a unit of dipole moment and has a value of 3.336 x 10–30 Coulomb meter. When salt is dissolved in water, the ions of the
salt dissociate from each other and associate with the dipole of the water molecules. This results in a solution

The Public Enemy By William Wellman

Recommended

Recommended

More Related Content

Similar to The Public Enemy By William Wellman

Similar to The Public Enemy By William Wellman (14)

More from Shannon Joy

More from Shannon Joy (20)

Recently uploaded

Recently uploaded (20)

The Public Enemy By William Wellman