More than twenty (23) years of experience on field engineering and design works involving various international projects in Middle East and South East Asia regions and Angola. Project involves are onshore and offshore construction involving various offshore structures such as but not limited to Jackets,Decks,Topside Facilities,Platforms,FPSO,FSO and FPU. Coordinate with consultants to ensure that the design is in accordance with relevant codes and specifications. Calculate the design and integrity of the structure. Prepares material take-off and execute technical bid evaluation prior to purchasing of the required materials. Coordinates on various technical matters with different disciplines and clients .Have a capacity of being a Lead Designer, Supervise the preparations of design,fabrication drawings.Conducts site surveys off-shore to determine design requirements or interface with any existing structures to suit new additional,modification of existing facilities. Prepare design drawings for all up-grades/modifications of all on-shore/off-shore Facilities Of the entire oil field under Chevron. Able to lead a group of designers in assurance that all relevant codes and specifications are meet. Computer skills - PDMS,ACAD,MICROSOFTWORD/EXCEL,STAAD PRO,SACS

1. PROFESSIONAL RESUME
Position : STRUCTURAL DESIGNER
Name : NARCISO B. VILLANUEVA, JR.
Date of Birth : 21
st
November, 1964.
Nationality : Filipino
Higher Education : Bachelor of Science in Civil Engineering
& Qualification
Language : English
CONTACT NO. +63-9509129876 Philippines
Email : nnarlouvillajr@gmail.com
nnarlouvillajr@yahoo.com
SUMMARY OF WORKING EXPERIENCE.
WORK PROFILE:
More than twenty (20) years of experience on field engineering and design works
involving various international projects in Middle East and South East Asia regions
and Angola.
Project involves are onshore and offshore construction involving various offshore
structures such as but not limited to Jackets,Decks,Topside
Facilities,Platforms,FPSO,FSO and FPU. Coordinate with consultants to ensure that the
design is in accordance with relevant codes and specifications. Calculate the design
and integrity of the structure. Prepares material take-off and execute technical bid
evaluation prior to purchasing of the required materials. Coordinates on various
technical matters with different disciplines and clients .Have a capacity of being a Lead
Designer, Supervise the preparations of design,fabrication drawings.Conducts site
surveys off-shore to determine design requirements or interface with any existing
structures to suit new additional,modification of existing facilities. Prepare design
drawings for all up-grades/modifications of all on-shore/off-shore Facilities Of the entire
oil field under Chevron.
Able to lead a group of designers in assurance that all relevant codes and
specifications are meet.
Computer Skills: ACAD, PDMS
●Project involves are onshore and offshore construction involving various offshore structures
such as but not limited to Jackets,Decks,Topside Facilities,Platforms,FPSO,FSO and FPU.
●Coordinate with consultants to ensure that the design is in accordance with relevant codes
and specifications.
● Prepares material take-off and execute
technical bid evaluation prior to purchasing of the required materials.
●Coordinates on various technical matters with different disciplines and clients .Have a capacity of
being a Lead Designer, Supervise the preparations of design, fabrication drawings.
●Conducts site surveys off-shore to determine design requirements or interface with any
Narciso B. Villanueva, JR 1 December 2015

2. existing structures to suit new additional, modification of existing facilities.
●Prepare design drawings for all up- grades/modifications of all on-shore/off-shore Facilities
Of the entire oil field under Chevron.
●Able to lead a group of designers in assurance that all relevant codes and specifications
are meet.
Conversant in International Codes, Standards & Specifications:
●Det Norske Veritas RP B401 “Recommended practice for cathodic protection
design”
●Det Norske Veritas RP5 “Rules for design, construction & inspections of offshore
structures”
●Det Norske Veritas “ Part 1, Chapter 4, Structural Design”
●API RP2A-WSD “Recommended practice for Planning, Designing & Constructing
fixed offshore platforms-working stress design, 21ST. Edition”
●API RP 2L “Planning, designing & constructing heliports for fixed platforms offshore
●API RP2Z “Recommended practice for pre production qualification for steel plate
for offshore”
●ANSI/AISC 360-05 “ Specification for Structural Steel building”
●AWS D1.1 “Structural Welding Code-Steel” ●ASTM A36
“STRUCTURAL Steel
●ASTM A53 “Pipe, Steel, Black & Hot dipped, Zinc-coated welded seamless
●ASTM A325 “High strength bolts for structural steel joints” ●Norsok N004
“Design of Steel Structures”
●Noble Denton “General guidelines for marine transportation”
●DNV “ Rules for the classification of steel ships, part 5,chapter
2, section 4&6,chapter 1
Narciso B. Villanueva, JR 2 December 2015

3. 
●BS EN 10225 “Weld able structural steels for fixed offshore structures-technical
delivery conditions
●ISO 19002 “FIXED OFFSHORE STRUCTURE”
● PTS 20.073 “ Design of fixed offshore structure”
●PTS 34.19.10.30 “Design of fixed offshore structures (August 2009, Rev no. 6)
●SES 10.1, REV. 5, “Design of fixed offshore structure”
●SES 46.5, REV. 0 “Weld able structure steels for fixed offshore structures”
WORKING EXPERIENCE:
April 29
th
2013 – Jan. 15, 2016: Petrokon Utama Sdn Bhd, Brunei.
Lead Structural Designer PUSB ComplexLot 7219, Jalan Jaya
Negara, Kampung
Pandan, P.O. Box 811
Kuala Belait, KA1189, Negara Brunie
PROJECTS:
Darussalam
:MLJ3 JACKET- TOTAL E & P BORNEO B.V.
MAHARAJA LELA SOUTH PROJECT.
• Work closely with Mechanical for precise design preparation as per latest equipment
General arrangement, piping layout plan, emergency escape route, site visit reports
& Others related information necessary to complete the work pack.
• Ensures that design drawings is in accordance with the latest BSP codes and standard
Specifications.
• Responsible in checking all drawings for WTI, Work Packs, As-built, ensures further that
Scope of works has been captured in the design drawings.
• Coordinates closely with Project Engineers to ensure that all work pack preparaton has been
Properly planned to meet project completion accordingly.
• Responsible in the design calculation of schematic diagrams and geometric layout
for complicated arrangement of steel beams for various design amendments.
●Ensure that all-structural members are graphically and analytically checked for conformity and
the design meets the requirement of relevant codes and specifications.
• Responsible in the design drawing preparation from Conceptual to
Narciso B. Villanueva, JR 3 December 2015

4. Detailed design stage.
• Monitor weekly progress in all ongoing projects to ensure target are meet as per planning and
scheduling
Mar 1
st
2010 – March 2013 Aker Engineering Sdn Bhd
Senior/Lead Structural Designer (Formerly known as Aker Kvaerner Eng
S.E.A Sdn Bhd), Kuala Lumpur, Malaysia
RESPONSIBILITIES:
●Appointed as Lead designer for KPOC Project , able to lead, coordinate with other
discipline With regards to various aspects.
●Responsible in the design drawings of service platforms, cooler deck, walkways, access
platforms , equipment supports and etc.
●Coordinate closely with PDMS operators and client as well for design checking of structures to
resolve problems that may arise during the process of modeling/fabrication.
●Coordinates with various disciplines to resolve any clashing or possible problems that can
hinder the normal flow of fabrication process and to avoid un-desirable cost impact to the
project.
●Monitor and supervise ACAD, BOCAD, PDMS operators to ensure that 2D dwgs. Has been
modeled accordingly and ensure clash free arrangement of all structural members.
●Responsible in the design calculation of schematic diagrams and geometric layout
for complicated arrangement of steel beams for various design amendments.
●Prepare design analysis to determine support for various bulk equipments.
●Responsible in the assurance that PDMS model has been reviewed in conformance with
design drawings.
Nov 2005 to June 2009: Cabinda Gulf Oil Company LTD.
Civil/Structural Designer Facilities Engineering, Camp Malongo,
Cabinda Angola
RESPONSIBILITIES:
●Prepares work pack for various projects on-shore and off-shore.
●Responsible in the design drawings of service platforms, cooler deck, walkways,
access platforms, Mud plants and etc.,
Narciso B. Villanueva, JR 4 December 2015

5. ●often go offshore to determine actual design basis to provide precise information in the
preparation of design drawings.
●Responsible in the design of service platforms, cooler deck, walkways, access platforms
Mud plants and etc.
DECEMBER 2004 TO SEPTEMBER 2005
STRUCTURAL CAD DESIGNER
PROSAFE PRODUCTION PRIVATE
LTD 1 INTERNATIONAL BUSINESS
PARK #10-01 THE SYNERGY
SINGAPORE 609917
PROJECTS:
WEST ESPOIR EVOIREN-FPSO PROJECT
AL ZAAFARANA-FPSO-ZAAFARANA OIL COMPANY,CAIRO,EGYPT
PETROLEO NAUTIPA
ENDEAVOR
DUTIES AND RESPONSIBILITIES:
●Prepare technical clarification and propose design revision to resolve any design discrepancy
against standard codes and specification.
●Attend meetings with consultant and raise design proposition to hasten any
problem encountered during fabrication.
●Coordinates with various disciplines to resolve any clashing or possible problems that can
hinder the normal flow of fabrication process and to avoid un-desirable cost impact to the
project.
APRIL 2002 -NOVEMBER 2004
STRUCTURAL DESIGNER/DETAILER
PASIR GUDANG, JOHOR, WEST
MALAYSIA
SIME SEMBCORP ENG’G.SDN. BHD.
PROJECTS:
●B11P - A (PROCESS AND UTILITY TOPSIDES) by SARAWAK SHELL BERHAD, SABAH
SHELL PETROLEUM COMPANY LIMITED.
●YOHO DEVELOPMENT PROJECT EPC2 PRODUCTION FACILITIES by
MOBILE PRODUCING NIGERIA LIMITED (NNPC/MPN JOINT VENTURE).
DUTIES AND RESPONSIBILITIES:
●Prepare technical clarification and propose design revision to resolve any design discrepancy
against standard codes and specification.
●Attend meetings with consultant and raise design proposition to hasten any
problem encountered during fabrication.
●Coordinates with various disciplines to resolve any clashing or possible problems that can
hinder the normal flow of fabrication process and to avoid un-desirable cost impact to the
project.
●Prepare revised drawings as per client design changes, material substitution and site
Narciso B. Villanueva, JR 5 December 2015

6. modifications.
●Prepares engineering revisions prior to material substitution of clashed structural members,
piping, pipe supports, equipments and its supports.
●Responsible in the design of service platforms, cooler deck, walkways, access platforms and
etc.
●Coordinate closely with PDMS operators and client as well for design checking of structures to
resolve problems that may arise during the process of fabrication.
●Responsible in the preparation of shop drawing and engineering revisions. Incorporates site
modifications as per actual site requirements. Prepares design sketches that can be more
adaptable to actual sites conditions. Raised site queries as required for any re-designing
works as a result of site inaccessibility
●Prepare weight control as per CAD drawings and final check center of gravity (c.o.g).
●Coordinates with PCCS regarding cost impact charged by sub-con as a result of design
revision and additional scope of work.
NOVEMBER 2000 TO JUNE 2001
STRUCTURAL DESIGNER/DETAILER
PENANG SHIPYARD COMPANY,
PULAU JERJAK, PENANG
PROJECT:
MODULE SUPPORT FRAME, MODULE 1 and MODULE 2 by CTOC-CARRIGALI-
TRITON OPERATING COMPANY SDN. BHD.
DUTIES AND RESPONSIBILITIES:
●Preparation of shop drawing, engineering revisions weld map drawings, weld
summary, technical clarification and monthly weight control report.
●Preparation of material take off and raise material requisition as per client material description
and specifications, revised the drawings as per client design changes, material substitution
and site modifications.
●Preparation of engineering revisions prior to material substitution as a result of clashing
between structural members and pipes, pipe supports, mechanical equipments and
supports. ●Incorporates site modifications as per actual site requirements or material
changes and etc. ●Monitor and supervise ACAD and BOCAD operators to ensure that
planning and fabrication schedules will meet.
●Involve in the preparation of material take- off for various projects to bid.
●Coordinates with the clients for various technical problems. Evaluates vendor technical
data and sub-contractors proposal for management approval.
●Coordinates with client for design discrepancies due to insufficient design information or
details. Likewise with method engineers regarding design discrepancies between consultant
and main contractor.
●Attends coordination meetings to resolve problems that can hamper the process of
construction/fabrication.
●Supervise CAD draft persons in the preparation of civil/structural drawings. Ensure that the
coordinates shown in the drawings are correctly verified against the calculation.
April 1999 to Aug 1999: PENANG SHIPYARD COMPANY, PULAU
Structural Designer/Detailer JERJAK, PENANG
Narciso B. Villanueva, JR 6 December 2015

7. PROJECTS:
SAMARANG NEW GAS COMPRESSOR AND OIL/GAS SEPARATOR PROJECT
BY PETRONAS CARIGALI SDN. BHD.
DUTIES AND RESPONSIBILITIES:
●Prepares material take-off for various projects to bid, revised drawings as per client
design changes, material
●Substitution, site modifications and as built drawings.
●Prepares engineering revisions prior to material substitution of clashed structural
members, piping, pipe supports, equipments and its supports.
●Prepare bidding job for Angsi - B topsides and jacket,Larut- A central processing platforms,
module 1,2,3 4 and living quarters,Cakerawala jacket
Jan 1999 – Apr 1999:
Piping Engineer/Designer
PIPE LINE ENGINEERING SDN.
BHD, 38 JALAN SEROJA 12,
TAMAN JOHOR JAYA, JOHOR
BAHRU 81100
PROJECT :
TITAN CRACKER PLANT - JAPAN GAS CORPORATION
DUTIES AND RESPONSIBILITIES:
●Responsible in the preparation of test package for pneumatic and hydrostatic testing
●Prepare and assign manpower for test package implementation.
●Supervise sub - contractors to execute test package safely and ensure that all permanent
gaskets, bolts and nuts are in accordance with client standards codes and specification.
●Responsible in line checking as per P&ID and design specification.
●Coordinates with client during the execution of pneumatic and hydrostatic testing.
Dec 1996 To Dec 1998: SIME SEMBAWANG ENG’G.SDN BHD.
Structural Designer/Detailer PASIR GUDANG, JOHOR, WEST
MALAYSIA
Narciso B. Villanueva, JR 7 December 2015

8. PROJECTS:
●DERRICK SET 24 by ELF BRUNEI
●IDDJ - JACKET AND TOPSIDES by BRUNEI SHELL PETROLEUM CO. SDN. BHD.
●LAWIT - A PRODUCTION PLATFORM by ESSO PRODUCTION MALAYSIA INC
●BUNGA KEKWA - A LIGHT WEIGHT STRUCTURE by INTERNATIONAL
PETROLEUM CORP.
●RESAK DEVELOPMENT PROJECTS - JACKET AND CENTRAL DEV’T. PRODUCTION
PLATFORM by PETRONAS CARRIGALI SDN. BHD
DUTIES AND RESPONSIBILITIES:
●Responsible in the preparation of shop drawing, engineering revisions, technical clarification
and monthly weight control report.
●Incorporates site modifications as per actual site requirements or material changes and etc.
●Prepares material take off and raise material requisition as per client material description and
specifications.
●Monitor and supervise Acad/X-steel operators to imply accordingly the issuance of shop
drawings as per planning and fabrication requirement.
●Involve in the preparation of material take off for various projects to bid.
●Coordinates with the clients for various technical problems.
●Evaluates vendor technical data/sub-contractors proposal and acts accordingly.
●Lead designer for Resak project
●Responsible in the detailed design drawings for Resak living quarters and helideck.
BIDDING JOBS:
MASA DEVELOPMENT PROJECTS - SOTONG DRILLING PLATFORMS (JACKET
ANDTOPSIDES) P.C.S.B MALONG DRILLING PLATFORMS (JACKET AND
TOPSIDES) P.C.S.B.
JINTAN UPSTREAM FIELD DEVELOPMENT PROJECT - JACKET AND TOPSIDES BY
Narciso B. Villanueva, JR 8 December 2015

9. OCCIDENTAL PETROLEUM MALAYSIA LIMITED.
Sept 1995 to Nov 1996: BOON CHANG (M) ENG; G.
Structural Designer/Detailer & CONSTRUCTION SDN. BHD.PLO. 17
KAWASAN PERINDUSTRIAN PONTIAN
82000 JOHOR, MALAYSIA
PROJECTS:
●MESOKO GAS WORKS, OSAKA JAPAN
● KUALA LUMPUR INTERNATIONAL AIRPORT
DUTIES AND RESPONSIBILITIES:
●Prepares bid package from quantity take off to material quotations. direct and indirect costing,
technical and commercial proposals and etc.
●Ensures that the design must be in accordance with relevant codes and specifications.
●Coordinates with contractor for various material changes affected by material un-availability.
●Prepare shop drawings cutting plans, material take off, ensure that all engineering.
Revisions have been correctly incorporated for as - building.
Nov 1994 to Sept 1995:
Structural Designer/Detailer
PROJECT :
SIME SEMBAWANG ENG’G.
SDN. BHD.PASIR GUDANG,
JOHOR, WEST MALAYSIA
M3PQ - A - SHELL SARAWAK BERHAD:
M3- LIVING QUARTERS - SHELL SARAWAK BERHAD
DUTIES AND RESPONSIBILITIES:
●Responsible in the preparation of shop drawings for living quarters and helpdesk.
●Ensure that all structural members were graphically and analytically checked and ensure
that the design must be in accordance with relevant codes and specification.
●Involved in the structural detailing of primary and secondary members such as beams
girders
and columns, also to include the typical sections and details of other structural members.
●Responsible in the preparation of material take off material requisition, and cutting plans.
●Mainly responsible in checking shop drawings if site modification, engineering. revisions
have
been correctly incorporated and further insure that as - built drawings are done accordingly
Narciso B. Villanueva, JR 9 December 2015

10. as
per client standards and specification.
●Attends coordination meeting with different disciplines and client to resolve various
problems that could be the possible cause of delay.
Apr 1993 to Nov 1994:
Structural Designer/Detailer
WEST
MALAYSIAN SHIPYARD AND
ENG’G.PASIR GUDANG, JOHOR,
MALAYSIA
PROJECTS:
●Dulang - B Gas Compression And Water Injection Badp- G
Production Platform By Petronas Carigali Sdn.Bhd.
●M1DR - A Jacket
●D - 35 Compression Module
●E11R - B Jacket
●Guntong D Compression Module, Malaysia Incorporated
DUTIES AND RESPONSIBILITIES:
●Involved in the design preparation of schematic diagrams and geometric layout for
complicated arrangement of beams, pipe supports and other secondary members.
●Undertakes design calculation which could be applicable for any problems that may
arise during fabrication and installation.
●Responsible in preparing revision sketches for all shop drawings affected by client
material change orders, & site modifications.
●Performs technical evaluation on material and equipments by various vendors and
prepare recommendations for commercial purpose.
●Monitor and supervise ACAD operators to expedite issuance of shop drawings to
comply accordingly fabrication planning requirements.
Narciso B. Villanueva, JR 10 December 2015

11. Sept 1989 to Feb 1993:
QUANTITY SURVEYOR/ESTIMATOR
PROJECTS:
AL-OSAIS CONTRACTING
ESTABLISHMENT, P.O BOX 1083 -
DAMMAM 31431, SAUDI ARABIA
●SHAMS TOURISM INTERNATIONAL COMPANY AT PALM BEACH RESORT HALF MOON
BAY, AL KHOBAR, SAUDI ARABIA
●180 UNIT TWO STOREY(2 AND 3 BEEDROOMS CHALETS)
●MARINA BEACH RESORTS AND SPORTS COMPLEX, NURSERY BUILDINGS,
ADMINISTRATION BUILDINGS WHICH INCLUDES LANDSCAPING
DUTIES AND RESPONSIBILITIES:
●Review and analyze job package and additional document prior to work implementation.
●Prepare material quantity take off and costing for various Saudi Aramco, Sceco, and Royal
Commissioning projects. Majority of these projects are high rise buildings, i.e. school buildings,
administration/office buildings, terminal buildings, hospitals, warehouses, mosques, and etc.
●Responsible in engineering works, i.e. prepare construction material submittals, company pre-
qualification documents, technical proposals, progress billings, etc.
●Site supervision during re-bars layout, pouring, fixing of forms erection and verifies/confirm
exact location/elevation of forms prior to pouring of concrete.
●Supervise erection/installation of pre-cast concrete panels, pre- engineered or structural
steel frames, pre-formed metal decking, built-up roofing, floor, walls, ceiling finishes and etc.
●Responsible in preparing bid package from quantity take off to material quotations, direct and
in-direct costing, technical and commercial proposals, etc.
Narciso B. Villanueva, JR 11 December 2015