IHC Distribution Center Operations Review for Waste and Cost Reduction

IHC distribution Center Operations Review on Supply Chain...
Operations Review on Waste Reduction, Cost Reduction and Process
This memo will discuss the efficient ways that Supply Chain Management, Inventory, and Logistics have been successfully implemented in the
Intermountain Healthcare Supply Chain Center. Peggy Lee, Card Program Manager at IHC led the tour in the Supply Chain Center. The goal of IHC
distribution center is reduce waste, cost and centralized the high volume supplies in one location and distribute across all their facilities. This gives
Intermountain better control of their inventories and negotiation advantages. Using these methods has had a great impact in waste reduction, quality
and cost savings.
Supply Chain infrastructure is an important process at Intermountain ... Show more content on Helpwriting.net ...
These activities have a time set when they can be performed. They have divided morning to receive delivery from 4am to 12pm; all deliveries are
done on a schedule, as well as pickups, pick up activities begin at 12pm. This is to increase efficiency of the location and the use of resources, thus
reducing the chance of error and process flows. In addition, order placement is another key process. All IHC facilities must have their entire orders
placed by 11:00 am every day to ensure order fulfillment. One other advantage at the supply chain facility is that it is built to allow shipments to be
cross–docking. So, instead of products being housed they are immediately moved to another truck to deliver to the final destination. Logistics processes
in this facility are designed to make resources more efficient and allow them to eliminate costs.
IHC has increased their success by implementing new strategies on supply chain management, logistics and inventory. They have been able to cut costs
and increase efficiencies in inventory on internal orders. Along with inventory, IHC has an added savings by testing for effectiveness of new products
when negotiating with suppliers in the mock up room. By having this kind of interaction with supplies, ensures that the products will meet their needs
and will contribute to their efficiency. They have also modified their logistics by reducing the number of trips
... Get more on HelpWriting.net ...

Essay On Thesis Presentation
Your thesis presentation has amazing visual elements like high–quality imagery to animation. It clearly shows your personality throughout your design.
Here is a feedback based on the Rise Model to elevate your work: 1. Reflect Based on the content requirements, Latasha, you have demonstrated the
work based on the four Degree Learning Outcomes: Connecting, Synthesizing, Transforming, Solving Problems, Innovative Thinking, and Acquiring
Competencies. In addition, you have achieved the required Wix template known as Michelle Meier through adding your appropriate imagery,
consistent design, and accurate links for each page, portfolio, and journal. Significantly, for each DLO page, you have laid out a well–thought–out
content that is... Show more content on Helpwriting.net ...
3. Suggest My suggestions would be to fix your grammatical and minor errors. I would suggest creating a footnote on the bottom of your page or
figuring out how to display your outside sources. The underline for the link to your sources on some of your DLOs pages can be somewhat
confusing and your viewers will not know what the purpose of it. Another suggestion would be to make sure to not make it similar to a portfolio.
The thesis presentation is meant to illustrate how you developed your work and connected with the four DLOs. When clicking on your final logo
design image on your Solving Problem Learning Outcome page to enlarge it. It is hard to see your logo on a black background. You can only see
small and blue circular shapes and colorful xylophone. I suggest changing your hover background to a white or a lighter color in your caption
/rollover settings when you are editing your work. 4. Elevate Latasha, you are going in the right direction on where you need to go when dealing with
your thesis. These are the examples to help you expand your projection/ideas: A. Your Connections/Research Previously, I mentioned that you could
show your own design problem instead of telling who told you to change it. In effect, it is not showing enough of "how", "what", and "why" you get
to solve this problem or sources that backed up your evidence, visual

Quafe Ultra Essay
In the early days of YC106, the Quafe Corporation announced the launch of a new beverage in their franchise known as Quafe Ultra. Promising a new
twist on the familiar Quafe flavor, the product came with a cluster–wide advertisement campaign. Portrayed as a "wonder tonic", the drink was rife with
controversy from the very first advertisements released. Accordingly, themarketing of the drink may have directly invoked the attack on what was the
largest gathering of celebrities at the time.
The first advertisement to cause a stir was released to the public of the Amarr Empire. Displaying St. Junip's Cathedral in Dam–Torsad, among Amarr
Prime's oldest landmarks, the advertisement revolved around a group of Amarr theology students. One of the students opens a can of Quafe Ultra and
the study quickly devolved into a raucous party. The cathedral spire was portrayed in a less than savory light from the resulting party. In response,
several notable entities within the Empire voiced their opposition for the advertisement. However, this did not at all deter Quafe from continuing their
marketing campaign. ... Show more content on Helpwriting.net ...
Illustrating a mockup of a Sukuuvestaa boardroom, the advertisement showed a Gallente actor depicting a Civire presenting various facts and figures.
A Gallente businessman then opened a can of Quafe Ultra began tap–dancing on the meeting table. Following in his example, the remainder of the
boardroom became ecstatic, partying themselves. The resulting portrayal had multiple corporate bodies within the Caldari state filing claims of
SCC–violations. Chief among them were the representatives of Drink Starsi, then a growing competitor of Qufe, who moved for the removal of all
Quafe advertising in Caldari

The Modelling Process And How It Helped With Risk Management
Explain the modelling process and how it helped with risk management
It is important to understand that you go through a set process of making multiple mock–ups of your product you are developing to a final stage this
helps because there is a risk making your final product without any sort of trial and error for example if you decide to make a fitness application
and figure out that the template and sort of arrangement doesn't look good then you will have to go back into the code and fix it which in turn will
make you face even more errors therefore wasting a lot of time and even money. But in order to counter this situation like this if the person had of
made a Photoshop copy then he would of seen that his app maybe doesn't look that visually appealing and that would also help looking at the overall
feel of that application which will in turn help figure out any more errors in the application and areas to improve upon. This strategy of technology
modelling will greatly reduce the risk of you getting stuck in any sticky situation therefore saving time and taking worry of your shoulders.
Experiences of Technological Modelling for me I have also have gone through similar process during the Initial brief assessment andprototype
development. During the initial brief assessment we had to go through the basic technological modelling process to come out with fully developed
initial brief for an application or a website in this case my browser but during this

Marketing Plan Analysis
Throughout the past few weeks, each member has taken on assignments geared towards specific sections of the marketing plan, and the tasks given
by our CBO. We have used our sessions to collaborate on ideas for each task in the marketing plan. Each member has dedicated their time and efforts
outside of the video sessions to ensure the project is completed to the best of our abilities.
Abel had a strong desire to contribute his video knowledge in making the promotional video for the Ronald McDonald House. For his part of the
service learning he was assigned to help create this promotional video for the Ronald McDonald House along with contributing to the marketing plan.
After each collaboration session, I have assigned tasks as the ... Show more content on Helpwriting.net ...
Also, she reviewed the organization's revenue and expenses and made a chart that presents the percentage of expense distribution.
As the team coordinator, I performed a thorough overview of the RMHCCV website, which included: the meals from the heart program, dollars for
dinner campaign, and the annual financial report for 2016. I created the electronic file and template of the marketing plan which included bland, but
labeled pages for the easy insertion of pertinent data. I gathered and collected all the appropriate information that was needed to create and insert an
introduction of the CBO into the marketing plan. I also overlooked the information that was presented and inserted into the marketing plan by
teammates and given feedback on particular contents. I put in significant thought into how the video should be presented and have familiarized myself
with video making software.
Throughout the service learning activity, JackiLynn has spent her time developing a campaign with a local business to raise funds for RMHCCV
Meals from the Heart program campaign of Dollars for Dinner. The first few hours were spent analyzing the current campaign and determining its
strengths and weaknesses and how it could be improved upon. From there, she determined that they needed a greater social media following. The
program being set forth by Quantum Leap be implemented in the first week of December. She oversaw development of the

Starbucks 2015 Annual Report And Identifies Key...
This paper looks at Starbucks 2015 annual report and identifies key performance indicators for the company. Identifying key performance indicators
will aid in designing a prototype dashboard for Starbucks decision support Systems (DSS). The prototype dashboard will include key performance
indicators (KPI). The source is from the course textbook, Starbucks Annual Report and an internet website used to design mockups.
Starbucks
Starbucks was founded in 1985 and is a global leader in premium coffee with locations in 68 countries. The company 's stock is traded on the
NASDAQ under the symbol "SBUX". They sell packaged coffee and tea, as well as handmade beverages that include coffee and tea. In addition to
coffee beverages, they sell pre–packaged food items such as sandwiches and snacks. Their products are not only sold in their own stores, but also in
grocery stores. Along with the flagship brand, Starbucks has additional brands: "Teavana, Tazo, Seattle 's Best Coffee, Evolution Fresh, La Boulange
and Ethos" (Starbucks Annual Report, 2015, p. 2).
Starbucks has company owned and operater stores as well as licensed stores held in various retail establishments such as grocery store chains. Its brand
is one of the most recognizable brands in the world. To continue with such brand recognition, they continue to expand in their current markets as well as
expand in high growth markets such as the China, Asia and Pacific (CAP) region. The new stores opening consist

Understanding Data For Troubleshooting Engine Malfunctions
GENERAL EXPERIENCE: Work involves the maintenance, inspection, troubleshooting, repair, overhaul, modification and testing of conventional,
modified, and PACER jet engines, their components, assemblies, and subassemblies to include gas turbine engines, and engine ground support
equipment (SE). Works also involves the review of engine/component records to determine cause of failure and the extent of disassembly and repair
required in returning engine and/or component to operational condition. Experience to organize assignments for subordinates, estimate material and
manpower needed for specific jobs; able to explain manuals, technical orders and data as well as work procedures; and prepare production records,
work records and reports. Ability to interpret data for troubleshooting engine malfunctions. DUTIES AND RESPONSIBLITIES: Plans, organizes, and
directs aerospace propulsion maintenance activities. Plans weekly or monthly work schedules and sequence of operations. Establishes deadlines and
priorities based on established general schedules, methods and policies. Determines skills, materials and equipment required to do the work.
Participates in the initial planning of current and future work schedules and development of budget requests. Provides workload data, estimates,
information on staffing needs, and recommendations as the scheduling of projected work. Assigns tasks to be performed. Explains work requirements,
methods, and procedures. Instructs subordinates on new

Idea Generation : The Development Of A Product Will Start...
Idea Generation: The development of a product will start with the concept. It is necessary to employ strong analyses to identify current market
trends and available solutions, understand customer behavior and needs, and identify areas of opportunity. This information will help keep ideas
focused and relevant. Some tools that can help this analysis include a basis internal and external SWOT analysis, study of market and customer
trends, competitor analysis, focus groups, sales staff and other employees, and information from trade shows. It is also helpful for the team to keep
important aspects of the future product in mind such as how lean it is, how scalable it is and how much return can it generate. There may be many
ideas at this point, which will be analyzed in detail in the next stage. During the new product development (NPD) process, keep the system nimble
and use flexible discretion over which activities are executed. You may want to develop multiple versions of your road map scaled to suit different
types and risk levels of projects.
Idea Screening: This step is crucial to ensure that unsuitable ideas, for whatever reason, are rejected as soon as possible. Ideas need to be considered
objectively, ideally by a group or committee. Specific screening criteria need to be set for this stage, looking at ROI, techinical sense, benefits to target
audience, affordability and market potential. These questions need to be considered carefully, to avoid product failure after

Zappos Essay
Zappos is an American online shoe retailer that appeared in 1999 when Nick Swinmurn established it. After the foundation, there was industriousness
towards its development and by 2009; it turned into a worldwide online retailer close by Amazon.Com Inc. Because of its accomplishments, it
experienced revamping to shape ten organizations. The Zappos Family of Companies deals with the ten organizations. The notoriety of Zappos Family
is a direct result of its amazing picture certify to good business conditions and engaging client administration. The organization's HR arranging and
usage is affected by its interior surroundings through an execution society. The association's way of life mirrors the ten center values that characterize
both the administration ... Show more content on Helpwriting.net ...
Both the administration and the representatives collaborated to infer and decide the best values, which would cooperation endeavors towards the
acknowledgment of the association's objectives. Most extreme yield in the association is conceivable with cooperation while the preparation procedure
is viable in light of the fact that through acclimation with organization's frameworks, culture and center qualities, representatives can perform their
assignments with adequacy. The Harvard model in human administration asset demonstrates how the administration of an association ought to decide
strategies and practices of the human asset and evaluate their viability in the association. . Human flexibility is likewise crucial in the human asset
stream in light of the fact that as Zappos shows with its enlistment technique. The hopefuls are met in light of their specialized abilities and the
similarity of their conduct with the organization's way of life. Enlisting the best workers, holding them suitably and offering them some assistance with
developing their aptitudes will build their endeavors. Since center qualities demonstrate the way of life of the association, standard and feasible change
will build workers' execution and

Apple Inc
Apple Inc. ( formerly Apple Computer, Inc.) is an American multinational corporation that designs and sells consumer electronics, computer software,
and personal computers. Apple was established on April 1, 1976 by( Steve Jobs .( Steve Wozniak .( Ronald Wayne. Former : Steve Jobs. (Chairman,
1976–1985, 2011; CEO, 1997–2011)( Current :Tim Cook. As of July 2011, Apple has 364 retail stores in thirteen countries as well as the online Apple
Store and iTunes Store . It is the largest publicly–traded corporation in the world by market capitalization, with an estimated value of US$626 billion
as of September 2012. Apples ruthless corporate culture is just one piece of a mystery that virtually every business executive in the... Show more
content on Helpwriting.net ...
I put out an agenda. Eighty percent is the same as it was the last week, and we just walk down it every single week.(We dont have a lot of process at
Apple, but thats one of the few things we do just to all stay on the same page." Its one thing when the leader describes the process. Its another thing
altogether when the troops candidly parrot back the impact it has on them. . Simplicity is key to Apples organizational structure. The org chart is
deceptively straightforward with none of the dotted–line or matrixed responsibilities popular elsewhere in the corporate world. . One of Apples greatest
strengths is its ability to focus on just a few things at a time. . Jobs inner circle includes (from left) Jonathan Ive, Phil Schiller, Eddy Cue, andScott
Forstall, photographed on the Apple campus in 2010. . Jobs generally kicks things off personally. Each session is as well crafted as the public product
debuts for which the CEO is so famous. . Specialization is the norm at Apple, and as a result, Apple employees arent exposed to functions outside their
area of expertise. . Apple Inc. is a global computer manufacturing company that is going through major changes in its organizational culture and it's
organizational structure due to several events of the past few years.(Apple is going through major restructuring to regain control of its operations and
finances in order to stay competitive on the global market. . Apple Inc.

Evaluation Of A Project Achievement Evaluation
2.1 project achievement evaluation In the actually activities practiced we met with our client frequently to worked to refine requirements, through
client meetings, and mockups of system. Once this was completed, indicated by the project document sign off from the client. We built a features list
and began background research into how to implement the system. (e.g cms tools, api integration, etc.) At this point, we suffered a setback from our
mid project review, as they were not happy with the level of planning we had implemented for this paper. Once we had established how we were
going to do this, (Joomla selected, capabilities explored), we began mocking up the system. (Maps, Article and Blurb Editors) We showed the client the
... Show more content on Helpwriting.net ...
And increase the email communication. Supervisor meetings and reviewdone Frequent backups of code and content We do have a backup of code by
using the plugin on Joomla, but I do not think we do the backups enough, because we do not have a good practice. Most of time I just forgot do that.
Osmotic communication and development Revision and testing of product against defined features list Continuous cross browser testing of product
Project progress trackingOur schedule has been change many time because the task delay. Reason for the delay is complex. –We plan to create the
feature at the end of the first semester. But cause of the final exam and team member has other plan during the break. We disconnect until the February
/2015. –Another problem is we lost a team member (Jason) in second semester, this makes us lose a part of the personal work log. But fortunately we
store and share group work document on google driven, so we just need to spend some time working over Jason's mock up without the need to
re–design work. –Based on the first two points, we finally 'built by feature ' of the step time is relatively tight, and our customer contact is not
frequent enough (only available face to face meeting at the first week Monday at each month, or connect by email), this make the iteration activity in
the design by features and build by features become a luxury thing. This make our development process looks like a waterfall model more

Indigo Studio Essay
There has been a fast request of the mobile portable applications for as far back as couple of years. The request is being gone to routinely by an
expansive group of engineers to finish the taking off necessities of the customers. With the constant endeavors of engineers, we have a wide assortment
of uses to be utilized for various necessities.
Engineers make utilization of various application outlining and advancement apparatuses that assistance them achieve the assignment easily. These
devices enable the originators to make useful as well as outwardly stylish devices too.
We should jump profound into the universe of these valuable instruments custom fitted to address the issues ofportable application designers, experts,
and ... Show more content on Helpwriting.net ...
Proto.io
Proto.io is prestigious for being zero coding wireframing instrument. Proto.io enables clients to create intuitive models. The instrument can also be
utilized for testing the model outlines on the cell phones and in addition on tablets. Another intriguing news about the application is that it has got
activities that can be utilized for reenacting the application.
AppMakr
AppMakr is essentially an online instrument that enables clients to make versatile applications that are content–focused. There is likewise a related
administration with the structure that gives the clients a chance to circulate their applications in various application stores. With AppMakr, it likewise
turns out to be anything but difficult to import RSS channels into a versatile upgraded application. For the same, there is no necessity of being a
versed developer. It just requires the fundamental HTML and CSS learning.
PhoneGap
Being an open source instrument, PhoneGap goes about as an expansion between singular portable OS SDKs and the regular advancement hones.
This device can be considered as a real part of the excellent ones as it underpins various portable OS that incorporate iOS, Blackberry, Android,
Windows, and other. The instrument can likewise be used to make application with JavaScript, HTML5, and CSS3 too.
Axure
Axure is the wireframing device in the event that you wish to make intuitive mockups. Having the status of a zero coding apparatus for wireframing

sites and

Karambit Knife Essay
The Karambit Knife Some have stated that the Karambit Knife has a dark appeal, well that maybe so but we here like to use the word "wicked".
The Karambit looks wicked with an incredible grace about it, and we like it that way. The forebearer of the modern Karambit first surfaced in
Indonesia during the 11th century as a farming tool and utility blade. The thriving trade industry at the time allowed the knife or tool as many at the
time considered it, to migrate throughout Southeast Asia. You simply cannot keep a good thing hidden, and while designs may vary and there are
several copycats, the Original Karambit maintains its arcing blade, which provided functionality well beyond that of a straight blade. Based on a
tiger's claw the blade is designed for tearing,... Show more content on Helpwriting.net ...
You need to take the time to "get the feel" for the knife. Learn its capabilities, and discover just what a versatile tool it can be. Remember it started out
as a tool mainly used in an agricultural setting, but of course, the self–defense applications became readily apparent to the users. You can practice with
a training Karambit if you want to use it as a self–defense weapon only. A mockup version, if you will, allows you to make mistakes without losing a
finger or considerable amounts of blood because you do need to practice moves to increase your own capabilities. Remember the knife itself is
harmless. It is the well–trained person using it, which is dangerous. Always respect your tools, train with them, and build your confidence up, which
can only come from intensive practice and then hope you never have to use one to defend yourself. There are no specific laws regarding a
Karambit. The laws that pertain to any knife folding or straight bladed would also apply to this knife. Each state dictates what is allowed to be carried
on your person in public, and which knives are not, so know the laws in your

The New Pitching Strategy From Napkin
Blog The New Pitching Strategy from Napkin to Mixpanel Like many people, I love whimsy, and the notion that a multibillion startup idea could
be scribbled on the back of a bar napkin has extraordinary appeal. In fact, napkin ideas are part of the evolution of pitching startup companies. I
find the napkin a better starting point than cave drawings of the wheel or pictographs showing how to herd buffalo over a cliff. From a practical
standpoint, let 's study the evolution of pitching tech ideas from the napkin to the mixpanel. Pitches, like every other field of endeavor, are changing
rapidly to reflect technology and better communications. Toilet Tissue and Bar Napkins Whether it 's toilet tissue, a placemat, bar napkin or back of
an envelope, great ideas don 't succeed because of where they were first recorded but because the ideas have merit. Pitching ideas has always been a
challenge, no matter where they originated, and pitches have changed substantially over the years. In the 19th century, hucksters and literal snake oil
salesmen often marketed their business ideas directly to clueless citizens who fell for a variety of get–rich–quick schemes, magical cure–alls and
ownership stakes of fine engineering marvels like the Brooklyn Bridge. As robber barons captured the industrial markets of the world, it became
increasingly important to know someone in business to pitch a new idea. The golden age of the deal focused on who you knew. If you could get a
meeting with a

Coca-Col The Real Story Behind The Real Thing
Coca–Cola today is a global company that has the most recognizable brand by consumers. The CNBC special on Coca–Cola titled The Real Story
Behind the Real Thing. Coca–Cola success thrives on its marketing. Coca Cola's main marketing tactic is to evoke emotions in its customers of
happiness and humor. Through many years of painting, jingles, holiday ad, and even buttons, and more Coca–Cola wants consumers to recall moments
in their life from their "memory bank" that are good times and happy feelings. Coca–Cola also uses mock–ups of places where customers would come
in contact with Coca–Cola, including the grocery store and drive–thru. The use of the mockups help the company guide customers to the products and
use ads to ale connection of food. The example used in the video was hungry consumers, with the help of Coke ads, could connect a hotdog and Coke
together. Coca–Cola uses this tact because Coca–Cola through research has found that it has to catch ... Show more content on Helpwriting.net ...
For new companies to enter the marketplace where Coca–Cola and Pepsi control the majority they need to spend time heavily on branding. The
company should be easily recognizable on shelves by name and packaging. Taking, for instance, Voss Artesian Still Water, this water basically like
any other water bottle, but the company decided to place the water in glass cylinder bottles reusable for use noticeable to consumers to grab their
attention. A company should also give consumers a variety when it comes to their products whether it be types of drinks or flavors. Consumers like
that can pick and choose what they want and they can choose with an array of options from sodas, teas, energy drinks, or sports drinks. With the
negative connotation that soda drinks receive and slowing sales beverage companies should look toward the future when entering the beverage market
and give consumers other options when purchasing

Prison Camp Narrative
That night our last assignment was to escape from a prison camp nestled in the jungle not far from our location. We were formed up in platoon size
chunks and marched down a dusty road with instructions to periodically peel off into the woods when the guards were looking in groups of four.
The march began and the Sgt. gave the word that every 30 seconds a different group would run for the woods and work their way to friendly lines.
Now with my group we had an officer candidate for West Point when he graduated this phase of training, and he didn't let us forget that. We were all
the same rank though for the moment and we would see what leadership qualities he lacked shortly thereafter. When it came our time to bolt we
charged out through ditch... Show more content on Helpwriting.net ...
Each night I was hitting my bunk before 9 PM in earlier if possible to get as much sleep as I could for the next day and to conserve my strength.
Each morning as we marched chow hall people were getting wise to that ploy and eating the bare minimum otherwise it will be coming up the
same way went down soon. Day after day the June heat of Georgia got hotter and our number got smaller so much so you could hear the bodies
slapping the pavement as we ran around the towers singing cadence. The whoop, whoop of the choppers flying in to dust another off from heat
exhaustion became more prevalent as the week wore on. By the end of the first week are number was less than half what we started with and now
the tower part of the training was to begin. This was conducted in mockups of aircraft and 34 foot tower. Now 34 feet doesn't seem to be that high
but as you are standing on a small platform in a parachute harness with rigging above your head out to a pulley arranged on a steel cable it looks
far. The object was to exit the mockup doorway feet and knees together chin down arms tight to your side holding a fake reserve chute and fall
about 10 feet give or take till slacken the line jerked you straight up. At that moment it was a thrill ride 300 feet down the cable, they call it a zip
line today, into a berm of dirt for a hard landing. A black hat instructor was sitting at the bottom of the tower grading you on your exit from the
mockup and how you recovered for the wild ride down the cable. This was done all day long at a full on run back from the berm of dirt into line
then double time to the top of the tower to start all over again. Other training devices were harnesses that you would swing off of a six–foot high step
and swing out over a sawdust pit back and forth until the black cat decided to let go of the

What Are The Exages And Disadvantages Of 3D Printing
Advantages and Disadvantages of 3D Printing
Advantages
Ability to Customize Products
Customization is a standard for 3D printing. With any raw materials that you desire, blueprints and a 3D printer, you can create any object you want,
with your own specifications and design.
Rapid Production of Prototypes
3D printing lets us quickly produce any prototypes or small versions of the original product. This helps researchers and engineers plan the actual object
and look for flaws may affect quality and functionality.
Low Production Cost
Although the cost of setting up a 3D printer is high, overall savings of labor costs, time saved, and equal effort for small–scale and mass
manufacturing ensures that the cost of production is relatively low.
Elimination of Storage Cost
Mass production is a problem for storage but printing small–scale ... Show more content on Helpwriting.net ...
Uses of 3D Printing
Industry (Business)
Manufacturing and Cost
In the industry, manufacturing products takes time, money and lots of materials. Businessmen want to advertise their products to large companies. But
how can they present their products in an instant? This is where 3D printing comes in; using this technology for business can help businessmen win
their businesses with companies.
Manufacturing prototypes with 3D printers costs are low compared to other manufacturing companies. We can increase the production of goods faster,
cheaper and even strengthen the durability of the product. 3D printers may cost high but look at the benefits that it can give to society.
Consumer

In a consumer's perspective, 3D printers are convenient to anyone. People don't have to go to stores or online to buy parts for their machines. They
only need the materials and blueprints in order to create anything they want. This technology helps people to save time, energy and money.

The Implementation Of The Project Resource Plan
As you can see from the critical path shown above, the most crucial parts of the project, are at the same time the most independent one in this type of
situation. And, although they needed follow the regular flow that is because the development of the product, meaning the implementation of the rules
needed to 'pull' the data from the database, can be simply verbally communicated between the Business Analyst, product owner, and the developers.
While the development is under way, the rest of the team can concentrate on document preparation. This often leads to the fact that the developers are
left with more time to focus on the programming part and develop a more suitable and reliable code. This is in many ways a good thing, as the
requirements may change mid way, and they are left with more time to accommodate their work to the agile environment. 19
*Process flow
*Please see appendence for the project resource plan.
The steps presented above, resulted in the creation of the product creation assigned to me as a
Business Analyst.
0
2
4
6
8
10
12
Week 1 Week 2 Week 3 Week 4
Resources
Project Life Cycle
Resource Load Profile
CAP ECM SOA QA Consultant Total 20 Part VI: Evaluation
Reflection on the internship In this chapter I reflect on the internship. Regarding my learning goals I shortly discuss my experiences; if I have achieved
my goal, whether I experienced difficulties and

Seniors: Senior Night
Market the event, need to include in your paper:
1)Write a description of the promotion for the game
The event I would look strongly at would be on the 28th of February because both South Dakota Coyotes Basketball team will be playing on that day.
The main sponsor of the day would State Farm as they look to get more attention in little town Vermillion. As the lastgame of the season in the Sanford
Coyotes Sport Complex, the theme of the night is the battle of the Seniors, also known as Senior night. Many people look at the SCSC as a great
sporting arena for the students, but few people realize that the crowd has a lot of older fans too. With Senior night for the players, Senior night for
older fans will be in full effect. Seniors (aged 65+) will have access to buy five tickets, get two free for any fall sport next year. With admissions to
access to ... Show more content on Helpwriting.net ...
The script of the event will speak highly of the Car Insurance from State Farm and describe how the game will be performed. The game is best
played with lots of participants but for the sake of this promotion, we will use any student or fan that is eligible to win. I would have a maximum of
ten students, but no less than six. Each student will have a basketball depending on a number of people we have to participant in the event, they will
have a restricted area of where they can only dribble in. Stepping out of the area would cause them to be out of the game. The way to win this
game is to be the last "car" standing. The only way to win this game is by attempting to swipe every other participant ball out. The winner will
receive fan gear from State Farm and a hundred dollars Visa gift card, while each of the losers will receive a twenty–dollar Visa gift card as a thank
you for participating in the

Zappos Case Study
This essay will include an opinion of what a good recruitment policy Zappos has. If this policy is a good one for its employees and how it will
impact them. The original idea for Zappos was to offer the biggest and best selection of shoes. Normally, this online vender would just have a few
selections of shoes but, unfortunately, their strategy didn't pan out the way it was intendent to. Many retailers both online and offline, where
consumers can shop for shoes. Tony Hsieh, Chief Executive Officer for Zappos changed the mission statement to offer the best customer service of any
shoe retailer. By changing their mission, Hsieh acquired the attention of many customers. Wanting to capture the essensece of what makes a company
great, Hsieh maintained a self–motivated, fulfilling company philosophy. The company would be known as a great place to work, and thus develop
loyal customers who would deliver the revenue needed to satisfy shareholders.
Review/Analysis of the Case
It is my opinion that iternal recruitment best fits the culdture of Zappos and that with this policy, success for the company is total. Recruitment that
utilizes internalsources is finding candidates who already work for the organization promoting fromwithin (Noe .R, Hollenbeck .J, Gerhart .B, Wright
.P, 2014 p.144). Zappos has designed a recruitment policy assists them in hiring the finest employees. During the hiring process, candidates go through
a rigorous interview process before being employed by the

Museum Of Flight History
Museum of Flight
History
The museum of flight is a nonprofit organization that opened in 1965 at King County National Airport in Seattle. It is the largest private air and space
museum in the world, and it also hosts the largest K–12 educational programs in the world. The museum is visited by four–hundred or more people
every year. It also serves more than 140,000 students a year. The Museum of Flight goes back to the Pacific Northwest Aviation Historical Foundation
that was funded for the excavation and restoration of the 1929 Boeing 80A–1, that was fund in a Alaskan landfill in Anchorage. The project took about
16 years to complete, and was put as the center piece of the museum. In 1968, the name "Museum of Flight" started in a 10,000–square–foot facility that
... Show more content on Helpwriting.net ...
Retired from active service earlier that year, it is on loan from the Air Force Museum. Originally parked on the east side of the museum, it was
driven across East Marginal Way and now rests in the museum's Airpark, where it is open to public walkthroughs. In 1997, the museum opened
the first full scale, interactive Air Traffic Control tower exhibit. The tower overlooks the Boeing Field runways, and home to one of the thirty
busiest airports in the country. The exhibit offers a glimpse into what it is like to be an air traffic controller. The next major expansion was opened
in 2004, with the addition of the J. Elroy McCaw Personal Courage Wing. The wing has 88,000 square feet of exhibit space on two floors, with
more than 25 World War I and World War II aircraft. It also has a large collection of model aircraft, including every plane from both wars. Many of
these aircraft were from the collection of the Champlin Fighter Museum,that was located in Mesa, Arizona, which closed in 2003. The wing opened on
June 6, which was the sixtieth anniversary of

Risd Personal Statement
I've loved art and graphic design for a long time, however, anything above simple crafts were not valued at my elementary or middle school. So,
eager to be in an environment that supported my interests I auditioned and was accepted into Los Angeles County High School for the Arts
(LACHSA). At LACHSA I explored many different types of art mediums, and discovered satisfaction from the problem solving that goes with
designing and making sculptures. My interest in graphic design also was able to thrive in the environment, outside of class I able to make posters for
school productions, which lead to design jobs outside of the school. While taking a communication design class I discovered my passion for
product–based design: I enjoyed creating a... Show more content on Helpwriting.net ...
I value that each major has a specific building, which is equipped with necessary tools as well as individual workspaces. Also intriguing is the strict
curriculum after the foundation year, diving into our major and learning the basics such as proper drafting and technical skills, as well as quickly
establishing hands on experience and developing safe and proper practices in wood and metal working. I see myself taking advantage of RISD's
partnership with Brown University: I find value in knowledge, not only to understand the world better, but also to inform my art.
While I'm not sure where I will be with my abilities upon graduation, I would like to leave the school with a professional portfolio that demonstrates
what I had learned during my time at RISD. In this portfolio I would like to demonstrate a high proficiency in conceptual thinking, the ability to
produce fine rendered technical drawings, as well as my model making skills. I don't expect, nor do I think its possible, to graduate with nothing left
to learn, however, I hope at the end of my four years I will be prepared to continue my education through real–world job

Software Applications Undergo Software Development Life Cycle
Software applications undergo software development life cycle (SDLC) which involve requirement gathering, system design, application development,
quality analysis and maintenance. Different strategies such as extreme programming, agile, and scrum can be employed to achieve efficient software
development and maintenance plan. System analysis and design models built using object oriented methodology and UML help in understanding the
purpose of software application and act as blueprint to implement the software. 2.1 Object Oriented Analysis and Design Object–Oriented Analysis and
Design (OOAD) approach is important for successful planning and execution of web applications which can function efficiently over long period of
time. OOAD approach... Show more content on Helpwriting.net ...
Functional requirements are operations, technical computation and data processing that explain the functionality of the application. Non–functional
requirements describe expected behaviour of the functionality specified for the system. Non–functional requirement specifies the design constraints
and characteristics that need to be taken care of to satisfy user requirements. Non–functional requirement specifies the behaviour of the system with
respect to various quantifiable attributes like performance, availability, etc. [8]. System design specifies plan to implement functional requirements
whereas system architecture specifies plan to implement non–functional requirement. Functional requirements can be explained using use cases and
non–functional are listed in a table. Functional Requirements for Travel Helper are explained using use cases models. Non–Functional Requirements
are listed in Appendix A. 2.2.2 Use Case Use case is a behavioural diagram. It depicts the sequence of actions a user of a system can perform to
achieve functionality of system. User has a role in the system which needs to be satisfied. Use Case describes complete details of the role, condition
and action corresponding to functional requirement of the system. The various sections of use case model are explained below. 1.Use Case Name:
Describes the name of the user action. 2.

Veterans Affairs Improvement Case Study
Summary: Veterans Affairs Improvement This article studies the Casey Comprehensive Care Center for Veterans, a fictitious organization within the
real U.S. Department of Veterans Affairs (VA). Nonprofit organizations became eligible for the Baldrige Award in 2006. The use of Baldrige criteria in
the fictitious organization provides aide to handling the challenges of increasing complexity of benefits and healthcare management, being an
integrated system within a complex government agency, local economic conditions, and its remote location. The creation of fictitious organizations that
follow the Baldrige criteria can create a sample application for organizations interested in applying for a Baldrige Award. Reaction: Helpful I believe

Zappos Recruitment Policy
Zappos Recruitment
Brian Hains
Kaplan University
Abstract
в—Џ Select a recruitment policy that might best fit the culture of Zappos. Why is this policy a good fit for the organization? What might be the impact
of the recruitment policy on the organization?
The new recruiting " No job postings" website is truly unique.
First off, you have to give the Zappos team credit for eliminating anything in recruiting, because we have a long history in recruiting of adding but never
subtracting approaches.
The new talent community declares the end to job postings and the painful transaction between applying for a specific job and getting a cold rejection.
It further offers the opportunity to become "a corporate insider," where you join the ... Show more content on Helpwriting.net ...
Senior human resources manager Christa Foley says one of her favorite questions is "What's the biggest misperception people typically have about
you?" She uses the question to identify candidates who are sincere and honest. Besides traditional interview questions, Zappos has some unconventional
ways to learn about candidates. One of the company's values is "Be humble." To gauge humility, HR directors talk to someone candidates didn't know
they were supposed to impress: the drivers of the shuttle buses that bring candidates to the company's offices. The HR directors find out whether the
candidates treated the driver with respect; if not, the candidate is eliminated from consideration. Another value is creativity and open–mindedness. To
test for this, the interviewer gives candidates a mockup of a newspaper and asks how many photos it contains. On one page of the newspaper, a
headline states the answer. The assumption is that people who are open–minded will be paying attention and notice the headline. The recruiting team
also goes to lunch with the candidates and observes how they interact with other people. The Zappos environment is loud, lively, and sociable, so
candidates who are a good cultural fit are likely to be engaged with others during the meal.
After this process is over, about one–tenth of the candidates receive a job offer from Zappos. As one final check of cultural fit, these new employees
are offered $3,000 to

Internship Reflection : Summer Internships
Summer Internship Reflection
Jorry Zhang
It's no secret that internships are the most effective way for students to gain work experience before graduation. In fact, studies show that 7 out of 10
internships turn into full–time jobs. Summer internships provide extremely valuable experience in my chosen field, and they are also plentiful.
Because I 'm too busy to commit as an intern during the school year, the summer could be a great option for me. During this summer break I interned
at a network company called Incurator.com. I participated in the redesign of the company's main website user interface, took part in the proposal
discussion on redesigning of the company 's logo (though the logo hasn't been redone by the end). At the same time, ... Show more content on
Helpwriting.net ...
After that, I can determine the design style and make sketches and mockup, then connect with my boss and show my works to my colleagues, then we
can have discussion see which part works and what needed to be changed, modify the design until it is perfect. During the internship, I learned the
importance of web designers in the development team of a website, the designer is responsible for communicating with the boss and marketing people
to understand the requirements, refine the requirements, design the web pages, make mockups, and share the mockups to the frontend developers, they
will program the page following the design. By having a composition mockup, it will make frontend developing so much easier and of cause for
aesthetics also.
Copyright is very important for all business. As a web designer, we pay more attention to the copyright when using fonts and images, because even a
little infringement is likely to be a devastating damage to the company. It is important to carefully investigate and read the charges and terms of the
fonts for commercial use. Helping protect others copyright is also helping to protect ours, knowing this is very important to a designer's career.
Through what I 've learned during work, I learned that by the end of the day the effectiveness of any website is measured by the business that 's been
procured through it

The Purpose Of Process And Process Planning
.PROCESS PLANNING
1.1 PURPOSE OF PROCESS PLANNING
Process planning is defined as the development of set of instructions describing all the operations required to convert a design into a product. Process
planning deals with the selection of the processes and the determination of requirements of the processes. The selected operations and requirements
have to be realized in order to transform raw material into a given shape. All the specifications and requirements of operations are included in the
process plan.
The process plan is a document such as drawing. Both the drawing and the process plan present the basic document for the manufacturing of part
/assembly.
Process planning is the planning activity of a planner. In TML following activities

Lean Practitioners Claim Benefits Of Target Value Design
LITERATURE STUDY
Lean practitioners claim benefits of Target Value Design (TVD) outweigh the costs involved. According to Lee (2012) Whole
–life TVD is a broad
application of TVD involving facility operation and user costs beyond first costs (such as design and construction costs). While the initial application
of TVD to projects considered only the capital costs of facilities, great efforts have been initiated to broaden its application toward analyzing business
operating costs and user costs, while considering whole–life costs. Lee's comparative analysis from different authors investigated the ratio of relative
costs of owning and operating a commercial office building. (Table 1). However different, they shared the same view on the importance of shifting
focus from first costs to whole–life costs.
Table 1: Ratios of relative Costs in Owning and Using a Commercial Office Building (Adapted from Lee 2012). Evans et al.(1998)Hughes et al.
(2004)Ive (2006)
Construction cost111
Building O&M costs5.41.5
Business operating costs2001215
Because of the implementation of TVD for healthcare facilities, it is important to determine whether or not the claim is true. Extant research focusses
on first cost reduction as a benefit of TVD without calculating cost involved for its implementation. This research uses a case study for a healthcare
facility to investigate actual benefits versus costs associated with the practice of TVD.
TARGET COSTING
TVD is an adaptation of

Manage Risks
Identify, Assess and Manage Risks
During the period November 2006 to June 2011 I was employed by RF Industries (RFI). RFI is a nationally represented company within the
telecommunications industry that designs, manufactures and distributes wireless technology products. In 2010, the E–AUTRY project commenced,
sponsored by the Defence Science and Technology Organisation (DSTO), for the development of a man portable UHF/VHF radio repeater allowing
radio communication extension for field troops. I was appointed Project Manager, as such, one of my responsibilities was the management of project
risks.
As part of project start–up activities, which included the creation of Project Management Plan and Schedule, I also created a Project Risk Management
Plan. This plan outlined how risk identification, analysis and evaluation would be monitored and controlled over the life of the ... Show more content on
Helpwriting.net ...
The meeting was as forum to brainstorm foreseeable project risks as well practical mitigation strategies. I conducted post analysis of this information,
including risk categorization, and risk applicability to project stage. This information was compiled and entered into the Risk Register before being
shared with all stakeholders.
To actively manage project risks, I understood ongoing communication with the project team was essential. The established weekly team meeting
provided the opportunity to discuss risks related to immediate development activities. In addition to discussing the active mitigation to known risks,
new risks were uncovered and added to the risk register for subsequent mitigation. As the project timeline progressed new risks were identified, these
were subsequently included in the risk register, monitored and prioritised. As existing risks were mitigated they were marked as closed removing any
further need to

Essay On Meal M8
After defining Meal M8's goals, conceptualizing the main features and aesthetics, the application and accompanying backend system will be brought to
market with desktop (web–based), Android and iOS versions using a five step process. According to the experts at Kinvey, this process takes 18
weeks to complete. Cost estimations for an application with Meal M8's necessary features, are approximately $50,000.00. In this initial phase, Meal
M8 will fuse ideas and features, creating a single application for all strategic markets, using Balsamiq Mockups software to create a prototype of the
application. The prototype allows the business to create a roadmap demonstrating how users will interact with, and navigate through the application;
focusing on the usability, look and feel of the end –product.... Show more content on Helpwriting.net ...
After testing the wireframe and implementing feedback, the developer starts working on setting up servers, databases, APIs, and storage solutions.
Once these are in place, and the necessary 'application marketplace' accounts are developed (with Microsoft, iOS and Android) the developer/designer
will start to create high–resolution versions of the individual screens and user interface from our wireframes. Once the application design is complete
the application will receive final testing prior to launching publicly. 500 users will be selected to try out different platform versions of the application.
Using the feedback received from testing, Meal M8's development team will implement updates to the interface and/or back end system to maximize
the usability and aesthetics of the application. The application will go public once all issues have been

The Purpose of Having Website Designers Essay
Technology is constantly changing, and the need for websites, whether for personal, social, marketing, branding, or online store purposes, web
designers are in high demand. In response to the constant change, web designers must keep up with the fast paced industry. Background skills in
programs like Dreamweaver, Photoshop, Illustrator, and Flash are needed, as well as, web languages such as HTML, CSS, PHP and JavaScript. Some
skills needed for this career include, effective use of color, an understanding of code hierarchy, and project management. The purpose of having web
designers is to maintain online communities and provide sites for businesses and organizations. With these websites, the businesses and organizations
can extend their... Show more content on Helpwriting.net ...
There are two different paths in web design. Front–End Design deals with all of the creation of site materials such as logos, mockups, HTML, CSS,
and placement of images. The Back–End Development deals with more intense code that helps provide the web sites functionality and database
management. A more simple way to put it is, the Front–End is what the user of the site can see while the Back–End is what is not directly visible to the
user. The average yearly salary for a Front–End Web Designer in the York, Pennsylvania area is $86,224. (Average Salary for Front End Designer in
York, PA) The average salary in Back–End Development for a year in York, PA, is around $94,475. (Average Salary for Back End Developer in York,
PA) " The Bureau of Labor Statistics projects 20.1 percent employment growth for Web developers between 2012 and 2022. During that period,
about 28,500 new jobs will need to be filled in an industry that already has roughly 141,400 positions." (Web Developer) Web designers also have the
ability to do freelance work. This allows them to have more time to also self–teach skills and stay up to date in the latest programs. A benefit to owning
your own business/freelancing is relationship–management. "Relationship management is your ability to use your awareness of your own emotions
and those of

Philip Condit and the Boeing 777
Philip Condit and the Development of the 777
Daniel W. Sobel
Embry–Riddle Aeronautical University
Abstract
This paper of Philip Condit and the Development of the 777; describes the management, and technological changes that Philip Condit made to the
development style of the Boeing Company. Before Philip Condit took over the 777 program, Boeing had been making airplanes in the same fashion as
it had been doing for 70 years prior. Mr. Condit saw the chance to bring Boeing into the 21st century not only with the new technology of computer
aided drafting, but with modern management techniques as well. The 777 program proved to be the perfect testing ground for a companywide change
in the way Boeing did its business.
Philip Condit ... Show more content on Helpwriting.net ...
Having the Government subsidize Airbus's development phase gave Airbus company a great advantage (Lawrence, 2008). Airbus at the time also
had the advantage in terms of technology. The fly by wire technology had been in use for some time in the Airbus A320. The two new models;
A330 and A340; also used this technology. Boeing had yet to produce a fly by wire system (Richards, 1990). The industry environment was also in
Boeings favor at the time. Boeing had a history of dedicated customers. The company had been making commercially successful jet aircraft since
it first developed the "707". Boeing was so successful at manufacturing the jet aircraft, that it was one of two companies left making them. This
advantage gave them the ability to be a powerful supplier. The expense of the development process also made it extremely difficult for new
companies to even enter the market. Boeing faced only one competitor at this point; Airbus (Pearce, Robinson, 2003). This was where Philip
Condit stepped in. He had been an engineer with Boeing since 1965; and assisted in the design of the 707, 727, 737, 747, and 757. He understood
how the company operated. One of the first things he changed was how the aircraft was to be physically designed. Previously, the engineers would
design a wing on paper, build it out of wood or foam, and then add it to a mockup of the aircraft. The people designing the fuel tanks would then add in
their

Swot Analysis : Rockwell Hardness Testing Machine
Before this project, our lab was only equipped with "Rockwell Hardness Testing Machine" which was quite insufficient, consequently our company had
to outsource the product for testing. To develop the facility for verification of materials' physical, mechanical and chemical properties and to bring
down the product cost and increase savings, the development of fully equipped Material Testing Lab was the demand of the time and indirectly our
client requirement. Reviewing my qualification, knowledge and study subjects, my immediate manager proposed my name for this project and I was
fortunate enough that I was selected to make feasibility report for the up gradation and development of Lab and started execution within a period of 6
months.
As ... Show more content on Helpwriting.net ...
f)I studied the "Environmental effect and behavior" of required machines/equipments which I received as a feedback from suppliers to ensure the
health and safety requirements throughout the lab.
g)I coordinated with the procurement department to resolve legal affairs and statutory requirements related to imports.
h)I supervised the installation of equipments.
i)I conducted mockup tests of equipments with demonstrator.
j)I prepared testing and safety procedures to conform the engineering standard requirements.
k)I provided training to my juniors to encourage them and to teach the standard requirements and to perform the test under my absence. As the first
stage of my project, I planned to meet my professors and lab assistants, where I gathered and noted down some valuable information. I searched various
websites and engineering journals on internet and collected data from mechanical testing standards to be informed about the more advanced and
accurate testing methods. I also studied various spare parts' drawings, manufacturing standards and technical data for the test. I consulted with
production department and my senior manager to know regarding all the tests which we presently outsource. With the help of this collected data I
finalized the list of tests and their machines/equipments.
The second stage of the project was looking for the renowned manufacturer and estimation of testing equipments. I personally visited various companies
/labs who

Microsoft Whiteboard Research Paper
Microsoft Whiteboard– Draw Freeform Canvas for Creative Collaboration| setup.office.com +1–855–441–4419
Microsoft unveiled its Whiteboard app prior to this year and has promised to make it available to all Office users by the end of 2017. To give you a
little hint of this app, Microsoft has just released a preview version of Whiteboard today to all Windows 10 devices, allowing multiple people to share
and collaborate using digital ink.
The app lets Windows 10 users ink on images, create mockups, or use notes on a virtual whiteboard. In this post we are reviewing what this preview
reveals about this App. Find below all the amazing features of this MS Office App that will be available with users at the end of this year. For office
support ... Show more content on Helpwriting.net ...
Now even remote workers can easily join in and contribute to the discussion.
Work naturally
Microsoft Whiteboard Preview lets you create in whatever way feels most natural to you. The pen–first, touch–first technology lets you make fluid
gestures with your fingers or draw out finer details with your pen. Using your pen, you can jot down notes, draw precise illustrations, or search for
images on the web. Using your fingers, you can swipe to different sections of your board, turn the virtual ruler to the angle you want, and drag and
drop images to create a photo stack. Whether you use pen or touch, Microsoft Whiteboard Preview recognizes your intent and delivers your desired
outcomes in an instant.
Create digitally
With the preview of Microsoft Whiteboard, you can use intelligent ink that recognizes your freeform drawings and turns them into standard shapes, so
it's easy to create great–looking tables, diagrams, and flowcharts. And unlike traditional whiteboards, the app automatically saves your boards, so
you can pick up where you left off or share links to your boards, so others can build on top of your work.* No need to take photos of your canvas or
email photos to others when you need to get them up to speed.
We're truly excited for you to try out the Microsoft Whiteboard Preview as we think it will help you unlock creativity and harness the power of your
teams. We look

My El Salvador Journey
I came to the United States 7 years ago. I used to live in El Salvador. There, I was taught that having discipline in life, is the key to being successful.
Hence, my parents were proud of me because I was always in the ten percent of my class. Thus, it was there where I took two courses that inspired
me to become an architect. One of the courses was physics, where I had to build a mockup with an electrical circuit included as a group project
assignment in my first year of high school. Although I had never had done anything like that before, I had fun building a model of a modern house.
The other course that I took was technical design where I learned how to trace lines using drawing tools, such as a pair of compasses, T–square, and
triangle. ... Show more content on Helpwriting.net ...
So, it was during my last year of high school when I decided what career path to take. Even though education in El Salvador is outstanding, it has no
career development opportunities for graduate students. Nevertheless, my mother's wish, being a single mother, was that I could make my dream a
reality. So, she made the decision of bringing me to this country. I was sixteen at that time. However, I was not accepted at any high school in Houston
for the reason that I already had a high school diploma from my native

Engineering Design Process
Engineering Design Process Flight decks on planes are a complex series of buttons, switches, knobs and lights. But pilots use each of these controls
to operate a different piece of equipment and navigate the plane safely. How do engineers design the flight deck so it works most efficiently for a
pilot? Its questions like that which must be asked and successfully answered for a piece of equipment to be functional and successful in a plane.
Kirschen Seah is a systems engineer for a commercial avionics electronics company. She works closely with other engineers in her company, as well as
with customers to imagine, design and evaluate new flight deck controls. Understanding the Design Process You may wonder how they come up with
the design for... Show more content on Helpwriting.net ...
The designer starts making a rough model by using simple things like clay and ping–pong balls. Keeping the materials and design simple and flexible
allows the designer to easily experiment with and change the prototype. A prototype is the first working draft of a piece of equipment. Once the
designer is satisfied with the shape, they make a drawing of the controller on a computer. Using the computer allows the team to change the components
shape and move the knobs and switches around easily. Once they have an initial
concept drawn up for the controller, they can "print" a three–dimensional copy of the controller using a special device called a stereolithography printer.
This lets them handle the controller and check out the feel and position of the buttons, knobs and trackball. If they want to change their position it is
still easy to do at this phase. If this all goes well, they are ready for testing. Kirschen helps with the projects by providing hardware and software,
which simulate an aircraft flight deck. This mockup allows designers to test out new designs. Here designers can evaluate their projects in a dynamic
flight simulation and make sure they work correctly and are easy for the pilots to use. Once the component has successfully passed on the
requirements it is ready for delivery to the client. How Can You Think Like and EngineerEngineering and science are largely about using a process to
ask and answer

Comparing Extreme Programming and Waterfall Project Results
Comparing Extreme Programming and Waterfall Project Results
Feng Ji
Carnegie Mellon University
Silicon Valley Campus
Mountain View, CA, 94035 jojojifeng@gmail.com Todd Sedano
Carnegie Mellon University
Silicon Valley Campus
Mountain View, CA, 94035 todd.sedano@sv.cmu.edu Abstract
Waterfall andExtreme Programming are two software project methods used for project management. Although there are a number of opinions
comparing the two methods regarding how they should be applied, none have used project data to clearly conclude which one is better. In this paper,
we present the results of a controlled empirical study conducted at
Carnegie Mellon University in Silicon Valley to learn about the effective transition from... Show more content on Helpwriting.net ...
The faculty decided to use Extreme Programming as the method for the Foundations course because it was an agile method, it had good engineering
practices, and it was a safe sandbox environment for engineers to try paired programming since many managers in industry were initially skeptical
about its benefits. In 2005, the faculty allowed three of the sixteen teams tried our new curriculum to see if there were any serious issues in the switch,
while other thirteen teams continued to follow a start point in 2004. The feedback was extremely positive so in 2006, all teams followed Extreme
Programming. For the project plan duration, Waterfall teams needed fifteen weeks to finish their tasks where as Extreme Programming teams were
given only thirteen weeks, a 13% reduction in time.
1.2.2. PET 1.1: In 2005, the VP of Engineering advised the three teams that rewriting the code from scratch would be easier than working with the
existing code base. Team 30:1 decided to use the latest in Java technologies including Swing and Hibernate. PET 1.1, the team 's product became the
starting point for the students in the following year.
1.2.3. PET 1.2: In 2008, the faculty switched the core technology from Java to Ruby on
Rails. Ruby on Rails ' convention over configuration, afforded a lower learning curve for students. For Pet 1.2, students would build their projects from
scratch.
2. Related work
Much research has been done as to when to use

IHC Distribution Center Operations Review for Waste and Cost Reduction

Recommended

Recommended

More Related Content

Similar to IHC Distribution Center Operations Review for Waste and Cost Reduction

Similar to IHC Distribution Center Operations Review for Waste and Cost Reduction (20)

More from Michelle Johnson

More from Michelle Johnson (20)

Recently uploaded

Recently uploaded (20)

IHC Distribution Center Operations Review for Waste and Cost Reduction