Challenges faced during embedded system design:
The challenges in design of embedded systems have always been in the same limiting requirements for decades: Small form factor; Low energy; Long-term stable performance without maintenance.
1. Design Challenges in
Embedded Systems
G. Mahalakshmi Malini, AP/ECE
Avinashilingam Institute for Home Science and Higher Education for Women, School of Engineering
Department of Electronics and Communication Engineering
2. Challenges faced during embedded system design:
Type and amount of hardware needed.
Optimising the power dissipation and energy consumption
Process deadlines
Flexibility and ability to upgrade
Reliability
3. Challenges in embedded system design
Type and amount of
hardware
Hardware based on SoC or VLSI design has very high NRE cost
and hardware design on a circuit board depends on available
chips.
Power dissipation Power is energy dissipated per second
Energy Consumption Energy consumption per unit talk time in a phone needs to be
controlled so that battery requires 24-hour battery charging after
the 4 hours of talk during the day.
Process deadlines Meeting the deadline of all processes in the system while keeping
the memory, power dissipation, processor clock rate and cost at
minimum is a challenge.
Flexibility Flexibility in design at little cost overhead is a challenge.
Ability to upgrade Ability to upgrade the design while keeping the cost minimum
4. Challenges in Embedded Challenges in Embedded System Design:
Optimizing the Design System Design: Optimizing the Design
Metrics
Power dissipation, physical size, number of gates and engineering,
prototype development and manufacturing costs.
6. Unit cost and NRE cost
Unit Cost: the monetary cost of manufacturing each copy of the system,
excluding NRE cost.
NRE cost (Non-Recurring engineering cost): the one-time monetary cost of
designing the system.
7. size
The physical space required by the system
Individually or part of a system
8. Cost and type of hardware needed
Optimizing the microprocessors, ASIPs and single purpose processors in
the system.
Hardware software participation
How much H/W How much S/W?
Optimization – according to the performance, power dissipation, cost and
other design metrics the system.
9. Optimizing hardware (memory RAM, ROM or internal and external flash
or secondary memory in the system, peripherals and devices internal and
external to the system, ports and buses in the system and power source or
battery in the system)
10. Considering design metrics
Power dissipation
Physical size, number of gates and engineering
Prototype development and manufacturing costs.
11. Power dissipation optimizing
Clock rate reduction
Operating voltage reduction
Wait, stop and cache disable instructions
Disabling or controlling certain units when not needed is one method of
saving power during execution.
Small size, low weight
Real time/ reactive operation
12. Deadlines
Challenging is reducing cost by meeting the deadline of all processes in the
system while keeping the memory, power dissipation, processor clock rate.
13. Flexibility
Different versions of a product for marketing
The ability to change the functionality of the system without incurring
heavy NRE cost
Upgrading and releasing advanced versions
14. Reliability and safety
Designing reliable product
Testing, verification and validation is a challenge
Assured safety
15. Testing
Find errors and to validate that the implemented product is as per the
specifications and requirements to get reliable product.
17. Time-to-prototype, Time-to-market
The time needed to build a working version of the system.
The time required to develop a system to the point that it can be released
and sold to customers.
19. Validation
To ensure that the system that has been created is a s per requirements
agreed upon at the analysis phase, and to ensure its quality
20. Summary
Discussed the different challenges in embedded system design
Explained the need for optimization in design and production
Discussed the importance of power utilization and minimization