This shows each step I took to make my magazine.

1. Progression of my magazine
By Liam Pegg

2. First steps
• I started with the picture of
my model on the blank
canvas. I added some effects
on the picture as well to make
it look better.
• I then added in the title and
the banner along the bottom
with the barcode and prices. I
added some blending options
on the writing so it stands out
more and looks professional.

3. Background and main story
• I then changed the background to
grey so the bright red writing looks
more fluorescent. I also added in
the main story of the
magazine, over the top of my
model I used the different blending
options to make the writing stand
out more.
• I then added in the smaller stories
on the magazine and the free
poster banner. This is to attract the
audiences attention and make the
front of the magazine look more
full.

4. Final steps for front cover
• I then added all the finishing
touches to the front cover to
fill all the gaps and to make it
stand out more. I kept the
colour scheme all the same on
the front cover so everything
looks like it should be
together. I added a picture of
another model on the cover
which I also use on the
contents page.

5. Contents Page firsts steps
• Again I started with the
picture of my models on
the blank page.
• I then added the title/
banner at the top of the
page and the page
number at the bottom of
the contents page.

6. Final steps- contents
• I then added in all the page
numbers and the stories
which will be inside of my
magazine, I kept them all to
the same style so they look
like they should be together.
• I then added the Facebook
and Twitter logos to the
bottom of the page just to
make the page look more
complete.

7. First steps- article
• Again I started by putting
the picture of my model
on the blank canvas.
• I then added the
background, page
numbers and the title to
the article pages I kept it
to the same style as my
contents page so they
look as thought they go
together.

8. Final steps- article
• I then added in the
interview questions
onto the first page
of my article. To fill
the page more.
• On the second page
I put my finished
article using
columns.