In this paper, the voltage stability of the power system is studied during fault conditions. Enhancement of the system’s stability will be achieved by utilizing Flexible AC transmission systems (FACTS) controllers at the best place in the system. The optimum placement of (FACTS) controllers occurred on the most affected bus by the fault in the system (weakest bus). Two approaches have been used in this study to effectively obtain the best location of the (FACTS) controllers in the system. The first method is based on computing the deviation which occurs in the active power and reactive power due to the fault at each load bus at a time. Whereas the second method is performed through exploiting a MATLAB fuzzy set technique utilizing two indices: Line Flow Index (LFI) and Voltage Profile Index (VPI) during fault and steady-state conditions. The results show that both of these indices resulted in the same bus as the best location. Remedial actions in the attempt at improving in the stability of the power system are discussed taking the advantage of using (FACTS) compensation (SVC) and (STATCOM) at the most vulnerable system buses. In this work, MATLAB program with an IEEE 24 bus system is examined.
In this paper, the voltage stability of the power system is studied during fault conditions. Enhancement of the system’s stability will be achieved by utilizing Flexible AC transmission systems (FACTS) controllers at the best place in the system. The optimum placement of (FACTS) controllers occurred on the most affected bus by the fault in the system (weakest bus). Two approaches have been used in this study to effectively obtain the best location of the (FACTS) controllers in the system. The first method is based on computing the deviation which occurs in the active power and reactive power due to the fault at each load bus at a time. Whereas the second method is performed through exploiting a MATLAB fuzzy set technique utilizing two indices: Line Flow Index (LFI) and Voltage Profile Index (VPI) during fault and steady-state conditions. The results show that both of these indices resulted in the same bus as the best location. Remedial actions in the attempt at improving in the stability of the power system are discussed taking the advantage of using (FACTS) compensation (SVC) and (STATCOM) at the most vulnerable system buses. In this work, MATLAB program with an IEEE 24 bus system is examined.
Updated field oriented control of induction motor.pptxMohit Sharma
It is a simulation work project done on a 5hp,440V/5A and 1440rpm Induction motor.It explains the control of induction motor using matlab-simulink algorithm by PI control as well as Fuzzy logic control.
Variable Frequency Drive Vs Servo Drive Systemsoftconsystem
The principal primary concern that separates Servo Drives from VFD is the encoder. While Servo Drives can’t work without an encoder for electronic commutation, a VFD can turn out entirely great without it.
In this project we will be controlling the speed of Dc motor using Arduino controller. Dc motor is drive by using PWM technique and then using encoder to sense the rpm of DC motor. Encoder produces pulses in the output, which is feed into Arduino and Arduino controls the speed of DC motor. So we have implemented the feedback system which controls the speed of DC motor.
A Review on Different Topologies and Control Method of Static Synchronous Com...ijtsrd
Rapidly acting static synchronous compensator STATCOM , a member of FACTS devices, is a capable technology being widely used as the state-of-the-art dynamic shunt compensator for reactive power control in transmission and distribution system. In the last 25 years, technocrats have made extensive research on STATCOM technology due to which, many STATCOM controllers based on the self-commutating solid-state voltage-source converter VSC have been developed and commercially put in operation to control system dynamics under stressed conditions. Because of its many attributes, STATCOM has emerged as a qualitatively superior controller relative to the line commutating static VAR compensator SVC . This controller is called with different terminologies as Static Compensator advanced static VAR compensator, advanced static VAR generator or static VAR generator, Static Condenser, synchronous solid-state VAR compensator, VSC-based SVC or self-commutated SVC or static synchronous compensator SSC or S2C . The development of STATCOM controller employing various solid-state converter topologies, magnetic configurations, control algorithms, switching techniques and so on, has been well reported in literature with its versatile applications in power system. A review on the state-of-the-art STATCOM technology and further research potential are presented. Arjun Singh "A Review on Different Topologies and Control Method of Static Synchronous Compensator" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18729.pdf
Introduction
Definition of FACTS system
Necessity of facts devices
Shunt connected controllers
Types of facts controllers
Shunt connected controllers
Benefits of FACTS
The concept of FACTS (Flexible AC Transmission System) refers to a family of power electronics based devices able to enhance AC system controllability and stability and to increase power transfer capability.
The design of the different schemes and configurations of FACTS devices is based on the combination of traditional power system components (such as transformers, reactors, switches, and capacitors) with power electronics elements (such as various types of transistors and thyristors).
Updated field oriented control of induction motor.pptxMohit Sharma
It is a simulation work project done on a 5hp,440V/5A and 1440rpm Induction motor.It explains the control of induction motor using matlab-simulink algorithm by PI control as well as Fuzzy logic control.
Variable Frequency Drive Vs Servo Drive Systemsoftconsystem
The principal primary concern that separates Servo Drives from VFD is the encoder. While Servo Drives can’t work without an encoder for electronic commutation, a VFD can turn out entirely great without it.
In this project we will be controlling the speed of Dc motor using Arduino controller. Dc motor is drive by using PWM technique and then using encoder to sense the rpm of DC motor. Encoder produces pulses in the output, which is feed into Arduino and Arduino controls the speed of DC motor. So we have implemented the feedback system which controls the speed of DC motor.
A Review on Different Topologies and Control Method of Static Synchronous Com...ijtsrd
Rapidly acting static synchronous compensator STATCOM , a member of FACTS devices, is a capable technology being widely used as the state-of-the-art dynamic shunt compensator for reactive power control in transmission and distribution system. In the last 25 years, technocrats have made extensive research on STATCOM technology due to which, many STATCOM controllers based on the self-commutating solid-state voltage-source converter VSC have been developed and commercially put in operation to control system dynamics under stressed conditions. Because of its many attributes, STATCOM has emerged as a qualitatively superior controller relative to the line commutating static VAR compensator SVC . This controller is called with different terminologies as Static Compensator advanced static VAR compensator, advanced static VAR generator or static VAR generator, Static Condenser, synchronous solid-state VAR compensator, VSC-based SVC or self-commutated SVC or static synchronous compensator SSC or S2C . The development of STATCOM controller employing various solid-state converter topologies, magnetic configurations, control algorithms, switching techniques and so on, has been well reported in literature with its versatile applications in power system. A review on the state-of-the-art STATCOM technology and further research potential are presented. Arjun Singh "A Review on Different Topologies and Control Method of Static Synchronous Compensator" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18729.pdf
Introduction
Definition of FACTS system
Necessity of facts devices
Shunt connected controllers
Types of facts controllers
Shunt connected controllers
Benefits of FACTS
The concept of FACTS (Flexible AC Transmission System) refers to a family of power electronics based devices able to enhance AC system controllability and stability and to increase power transfer capability.
The design of the different schemes and configurations of FACTS devices is based on the combination of traditional power system components (such as transformers, reactors, switches, and capacitors) with power electronics elements (such as various types of transistors and thyristors).
Facts controllers for power flow control a brief reviewDHEERAJ DHAKAR
This paper provides a review of FACTS devices. The value of these FACTS is the improvement of security and efficiency of power transmission networks. Fast controllability in emergency situation provides increased flexibility and therefore stability and security advantages. The flexibility in control allows operating closer to stability limits and improve the efficiency of existing networks
Comparison of Shunt Facts Devices for the Improvement of Transient Stability ...IJSRD
This paper presents, the performance of STATCOM placed at midpoint of the two machine power system and compared with the performance of SVC. The comparison of various results found for the different type of faults (single line, double line & three phase fault) occur in long transmission line, and their removal by using shunt FACTS devices is analysed. Computer simulation results under a severe disturbance condition (three phase fault) for different fault clearing times, and different line lengths are analyzed. Both controllers are implemented using MATLAB/SIMULINK. Simulation results shows that the STATCOM with conventional PI controller installed with two machine three bus systems provides better damping oscillation characteristics in rotor angle as compared to two machine power system installed with SVC. The transient stability of two machine system installed with STATCOM has been improved considerably and post settling time of the system after facing disturbance is also improved.
Comparison of Shunt Facts Devices for the Improvement of Transient Stability ...IJSRD
This paper presents, the performance of STATCOM placed at midpoint of the two machine power system and compared with the performance of SVC. The comparison of various results found for the different type of faults (single line, double line & three phase fault) occur in long transmission line, and their removal by using shunt FACTS devices is analysed. Computer simulation results under a severe disturbance condition (three phase fault) for different fault clearing times, and different line lengths are analyzed. Both controllers are implemented using MATLAB/SIMULINK. Simulation results shows that the STATCOM with conventional PI controller installed with two machine three bus systems provides better damping oscillation characteristics in rotor angle as compared to two machine power system installed with SVC. The transient stability of two machine system installed with STATCOM has been improved considerably and post settling time of the system after facing disturbance is also improved.
The electricity supply industry is undergoing a profound transformation worldwide. Market forces, scarcer natural resources, and an ever-increasing demand for electricity are some of the drivers responsible for such unprecedented change. Against this background of rapid evolution, the expansion programs of many utilities are being thwarted by a variety of well-founded, environment, land-use, and regulatory pressures that prevent the licensing and building of new transmission lines and electricity generating plants.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
UPFC in order to Enhance the Power System ReliabilityIJMER
The maintenance and reliability of the power system has become a major aspect of study. The
solution is the use of FACTS devices especially the use of UPFC. Unified Power Flow Controller (UPFC)
is the most widely used FACTS device to control the power flow and to optimize the system stability in the
transmission line. It is used to control the power flow in the transmission systems by controlling the
impedance, voltage magnitude and phase angle. This controller offers advantages in terms of static and
dynamic operation of the power system. The UPFC with its various modes of operation is understood.
Second, the operation of control system used in its converters is also studied. Finally by help of modeling
of a power system in SIMULINK / MATLAB SIMPOWERSYSTEM and by installing single phase UPFC
in transmission link, its use as power flow controller and voltage injection and constructing a lab scale
model of UPFC is discussed also.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)
Facts syllabus
1. Elective – IV
EE424/1: FACTS Controllers
EE424/2:EHV AC Transmission
EE424/3: Database Management Systems
EE424/4: Embedded Systems & VLSI
EE425/5: ANN and Fuzzy Systems
UNIT-I
FACTS Concept and General system Considerations:
Power Flow in AC system - definitions on FACTS - Basic types
of FACTS Controllers. Converters for Static Compensation -
Three Phase Converters and Standard Modulation Strategies
(Programmed Harmonic Elimination and SPWM) - GTO
Inverters - Multi-Pulse Converters and Interface Magnetics -
Transformer Connections for 6 and 12 pulse operation.
UNIT-II
Static Shunt Compensators: SVC and STATCOM - Operation
and Control of TSC, TCR, STATCOM - Comparison between
SVC and STATCOM - STATCOM for transient and dynamic
stability enhancement.
UNIT-III
Static Series Compensation: GCSC, TSSC, TCSC and SSSC
- Operation and Control - External System Control for series
Compensators - SSR and its damping - Static Voltage and
Phase Angle Regulators - TCVR and TCPAR - Operation and
Control.
UNIT-IV
UPFC and IPFC: The unified Power Flow Controller –
Operation - Comparison with other FACTS devices - control of
L T P M C
EE 424/1 FACTS CONTROLLER 4 1 0 100 4
2. P and Q - Dynamic Performance - Special Purpose FACTS
controllers - Interline Power flow Controller - Operation and
Control.
TEXT BOOKS:
1. Understanding FACTS: Concepts and Technology of Flexible AC
Transmission Systems, IEEE Press, 2000 by N.G. Hingorani & L.Gyugyi.
2. Reactive Power Control in Electric Systems by T.J.E. Miller , John Wiley & sons
REFERENCE BOOKS:
1. FACTS controllers in power transmission and distribution by Padiyar KR, New Age
2. Power Electronics, circuits, devices and applications by M.H. Rashid Pearson 3rd
edition, 2005
3. Journal & Conference papers from IEEE
